cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state

Cpuidle governor only suggests the state to enter using the
governor->select() interface, but allows the low level driver to
override the recommended state. The actual entered state
may be different because of software or hardware demotion. Software
demotion is done by the back-end cpuidle driver and can be accounted
correctly. Current cpuidle code uses last_state field to capture the
actual state entered and based on that updates the statistics for the
state entered.

Ideally the driver enter routine should update the counters,
and it should return the state actually entered rather than the time
spent there. The generic cpuidle code should simply handle where
the counters live in the sysfs namespace, not updating the counters.

Reference:
https://lkml.org/lkml/2011/3/25/52

Signed-off-by: Deepthi Dharwar <deepthi@linux.vnet.ibm.com>
Signed-off-by: Trinabh Gupta <g.trinabh@gmail.com>
Tested-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Acked-by: Arjan van de Ven <arjan@linux.intel.com>
Acked-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 39 insertions, 28 deletions

diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
index 4bf6e6e8b100..58425c75f1b8 100644
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -88,17 +88,19 @@ static int _cpuidle_deny_idle(struct powerdomain *pwrdm,
 /**
  * omap3_enter_idle - Programs OMAP3 to enter the specified state
  * @dev: cpuidle device
- * @state: The target state to be programmed
+ * @index: the index of state to be entered
  *
  * Called from the CPUidle framework to program the device to the
  * specified target state selected by the governor.
  */
 static int omap3_enter_idle(struct cpuidle_device *dev,
-			struct cpuidle_state *state)
+				int index)
 {
-	struct omap3_idle_statedata *cx = cpuidle_get_statedata(state);
+	struct omap3_idle_statedata *cx =
+			cpuidle_get_statedata(&dev->states[index]);
 	struct timespec ts_preidle, ts_postidle, ts_idle;
 	u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
+	int idle_time;
 
 	/* Used to keep track of the total time in idle */
 	getnstimeofday(&ts_preidle);
@@ -113,7 +115,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 		goto return_sleep_time;
 
 	/* Deny idle for C1 */
-	if (state == &dev->states[0]) {
+	if (index == 0) {
 		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
 		pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
 	}
@@ -122,7 +124,7 @@ static int omap3_enter_idle(struct cpuidle_device *dev,
 	omap_sram_idle();
 
 	/* Re-allow idle for C1 */
-	if (state == &dev->states[0]) {
+	if (index == 0) {
 		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
 		pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
 	}
@@ -134,28 +136,35 @@ return_sleep_time:
 	local_irq_enable();
 	local_fiq_enable();
 
-	return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
+	idle_time = ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * \
+								USEC_PER_SEC;
+
+	/* Update cpuidle counters */
+	dev->last_residency = idle_time;
+
+	return index;
 }
 
 /**
  * next_valid_state - Find next valid C-state
  * @dev: cpuidle device
- * @state: Currently selected C-state
+ * @index: Index of currently selected c-state
  *
- * If the current state is valid, it is returned back to the caller.
- * Else, this function searches for a lower c-state which is still
- * valid.
+ * If the state corresponding to index is valid, index is returned back
+ * to the caller. Else, this function searches for a lower c-state which is
+ * still valid (as defined in omap3_power_states[]) and returns its index.
  *
  * A state is valid if the 'valid' field is enabled and
  * if it satisfies the enable_off_mode condition.
  */
-static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev,
-					      struct cpuidle_state *curr)
+static int next_valid_state(struct cpuidle_device *dev,
+				int index)
 {
-	struct cpuidle_state *next = NULL;
+	struct cpuidle_state *curr = &dev->states[index];
 	struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr);
 	u32 mpu_deepest_state = PWRDM_POWER_RET;
 	u32 core_deepest_state = PWRDM_POWER_RET;
+	int next_index = -1;
 
 	if (enable_off_mode) {
 		mpu_deepest_state = PWRDM_POWER_OFF;
@@ -172,20 +181,20 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev,
 	if ((cx->valid) &&
 	    (cx->mpu_state >= mpu_deepest_state) &&
 	    (cx->core_state >= core_deepest_state)) {
-		return curr;
+		return index;
 	} else {
 		int idx = OMAP3_NUM_STATES - 1;
 
 		/* Reach the current state starting at highest C-state */
 		for (; idx >= 0; idx--) {
 			if (&dev->states[idx] == curr) {
-				next = &dev->states[idx];
+				next_index = idx;
 				break;
 			}
 		}
 
 		/* Should never hit this condition */
-		WARN_ON(next == NULL);
+		WARN_ON(next_index == -1);
 
 		/*
 		 * Drop to next valid state.
@@ -197,37 +206,39 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev,
 			if ((cx->valid) &&
 			    (cx->mpu_state >= mpu_deepest_state) &&
 			    (cx->core_state >= core_deepest_state)) {
-				next = &dev->states[idx];
+				next_index = idx;
 				break;
 			}
 		}
 		/*
 		 * C1 is always valid.
-		 * So, no need to check for 'next==NULL' outside this loop.
+		 * So, no need to check for 'next_index == -1' outside
+		 * this loop.
 		 */
 	}
 
-	return next;
+	return next_index;
 }
 
 /**
  * omap3_enter_idle_bm - Checks for any bus activity
  * @dev: cpuidle device
- * @state: The target state to be programmed
+ * @index: array index of target state to be programmed
  *
  * This function checks for any pending activity and then programs
  * the device to the specified or a safer state.
  */
 static int omap3_enter_idle_bm(struct cpuidle_device *dev,
-			       struct cpuidle_state *state)
+			       int index)
 {
-	struct cpuidle_state *new_state;
+	struct cpuidle_state *state = &dev->states[index];
+	int new_state_idx;
 	u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state;
 	struct omap3_idle_statedata *cx;
 	int ret;
 
 	if (!omap3_can_sleep()) {
-		new_state = dev->safe_state;
+		new_state_idx = dev->safe_state_index;
 		goto select_state;
 	}
 
@@ -237,7 +248,7 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 	 */
 	cam_state = pwrdm_read_pwrst(cam_pd);
 	if (cam_state == PWRDM_POWER_ON) {
-		new_state = dev->safe_state;
+		new_state_idx = dev->safe_state_index;
 		goto select_state;
 	}
 
@@ -264,11 +275,10 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev,
 	if (per_next_state != per_saved_state)
 		pwrdm_set_next_pwrst(per_pd, per_next_state);
 
-	new_state = next_valid_state(dev, state);
+	new_state_idx = next_valid_state(dev, index);
 
 select_state:
-	dev->last_state = new_state;
-	ret = omap3_enter_idle(dev, new_state);
+	ret = omap3_enter_idle(dev, new_state_idx);
 
 	/* Restore original PER state if it was modified */
 	if (per_next_state != per_saved_state)
@@ -339,11 +349,12 @@ int __init omap3_idle_init(void)
 
 	cpuidle_register_driver(&omap3_idle_driver);
 	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
+	dev->safe_state_index = -1;
 
 	/* C1 . MPU WFI + Core active */
 	cx = _fill_cstate(dev, 0, "MPU ON + CORE ON");
 	(&dev->states[0])->enter = omap3_enter_idle;
-	dev->safe_state = &dev->states[0];
+	dev->safe_state_index = 0;
 	cx->valid = 1;	/* C1 is always valid */
 	cx->mpu_state = PWRDM_POWER_ON;
 	cx->core_state = PWRDM_POWER_ON;