ARM: OMAP2+: Remove legacy booting support for Overo

We've been moving all omap2+ based systems to boot in device tree only
mode for a few years now. Only omap3 has legacy booting support
remaining. Most omap3 boards already have related arch/arm/boot/*.dts*
files for booting with device tree.

This board has support for device tree based booting, and we've been
printing warnings about the legacy booting being deprecated for a
few merge cycles now. Let's attempt to remove the legacy booting
for it.

The reason for removing the legacy booting support now rather than
later is we can simply revert this patch if necessary if we run
into some unexpected issues that are not trivial to fix for the
device tree based booting.

Cc: Florian Vaussard <florian.vaussard@epfl.ch>
Acked-by: Ash Charles <ashcharles@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

3 files changed, 0 insertions, 578 deletions

diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index 8b3aa4ca59a2..1b8a45a4642a 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -203,12 +203,6 @@ config MACH_OMAP3_TORPEDO
 	 for full description please see the products webpage at
 	 http://www.logicpd.com/products/development-kits/zoom-omap35x-torpedo-development-kit
 
-config MACH_OVERO
-	bool "Gumstix Overo board"
-	depends on ARCH_OMAP3
-	default y
-	select OMAP_PACKAGE_CBB
-
 config MACH_OMAP3517EVM
 	bool "OMAP3517/ AM3517 EVM board"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index ff634a1c26f5..a60e98689713 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -246,7 +246,6 @@ obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
 obj-$(CONFIG_MACH_OMAP3530_LV_SOM)      += board-omap3logic.o
 obj-$(CONFIG_MACH_OMAP3_TORPEDO)        += board-omap3logic.o
-obj-$(CONFIG_MACH_OVERO)		+= board-overo.o
 obj-$(CONFIG_MACH_OMAP3_PANDORA)	+= board-omap3pandora.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o sdram-nokia.o
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
deleted file mode 100644
index 2dae6ccd39bb..000000000000
--- a/arch/arm/mach-omap2/board-overo.c
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- * board-overo.c (Gumstix Overo)
- *
- * Initial code: Steve Sakoman <steve@sakoman.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/spi/spi.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mmc/host.h>
-#include <linux/usb/phy.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/map.h>
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "common.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "gpmc.h"
-#include "hsmmc.h"
-#include "board-flash.h"
-#include "common-board-devices.h"
-
-#define	NAND_CS			0
-
-#define OVERO_GPIO_BT_XGATE	15
-#define OVERO_GPIO_W2W_NRESET	16
-#define OVERO_GPIO_PENDOWN	114
-#define OVERO_GPIO_BT_NRESET	164
-#define OVERO_GPIO_USBH_CPEN	168
-#define OVERO_GPIO_USBH_NRESET	183
-
-#define OVERO_SMSC911X_CS      5
-#define OVERO_SMSC911X_GPIO    176
-#define OVERO_SMSC911X_NRESET  64
-#define OVERO_SMSC911X2_CS     4
-#define OVERO_SMSC911X2_GPIO   65
-
-/* whether to register LCD35 instead of LCD43 */
-static bool overo_use_lcd35;
-
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
-	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
-/* fixed regulator for ads7846 */
-static struct regulator_consumer_supply ads7846_supply[] = {
-	REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-static struct regulator_init_data vads7846_regulator = {
-	.constraints = {
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(ads7846_supply),
-	.consumer_supplies	= ads7846_supply,
-};
-
-static struct fixed_voltage_config vads7846 = {
-	.supply_name		= "vads7846",
-	.microvolts		= 3300000, /* 3.3V */
-	.gpio			= -EINVAL,
-	.startup_delay		= 0,
-	.init_data		= &vads7846_regulator,
-};
-
-static struct platform_device vads7846_device = {
-	.name		= "reg-fixed-voltage",
-	.id		= 1,
-	.dev = {
-		.platform_data = &vads7846,
-	},
-};
-
-static void __init overo_ads7846_init(void)
-{
-	omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL);
-	platform_device_register(&vads7846_device);
-}
-
-#else
-static inline void __init overo_ads7846_init(void) { return; }
-#endif
-
-#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
-
-#include <linux/smsc911x.h>
-#include "gpmc-smsc911x.h"
-
-static struct omap_smsc911x_platform_data smsc911x_cfg = {
-	.id		= 0,
-	.cs             = OVERO_SMSC911X_CS,
-	.gpio_irq       = OVERO_SMSC911X_GPIO,
-	.gpio_reset     = OVERO_SMSC911X_NRESET,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static struct omap_smsc911x_platform_data smsc911x2_cfg = {
-	.id		= 1,
-	.cs             = OVERO_SMSC911X2_CS,
-	.gpio_irq       = OVERO_SMSC911X2_GPIO,
-	.gpio_reset     = -EINVAL,
-	.flags		= SMSC911X_USE_32BIT,
-};
-
-static void __init overo_init_smsc911x(void)
-{
-	gpmc_smsc911x_init(&smsc911x_cfg);
-	gpmc_smsc911x_init(&smsc911x2_cfg);
-}
-
-#else
-static inline void __init overo_init_smsc911x(void) { return; }
-#endif
-
-/* DSS */
-#define OVERO_GPIO_LCD_EN 144
-#define OVERO_GPIO_LCD_BL 145
-
-static struct connector_atv_platform_data overo_tv_pdata = {
-	.name = "tv",
-	.source = "venc.0",
-	.connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
-	.invert_polarity = false,
-};
-
-static struct platform_device overo_tv_connector_device = {
-	.name                   = "connector-analog-tv",
-	.id                     = 0,
-	.dev.platform_data      = &overo_tv_pdata,
-};
-
-static const struct display_timing overo_lcd43_videomode = {
-	.pixelclock	= { 0, 9200000, 0 },
-
-	.hactive = { 0, 480, 0 },
-	.hfront_porch = { 0, 8, 0 },
-	.hback_porch = { 0, 4, 0 },
-	.hsync_len = { 0, 41, 0 },
-
-	.vactive = { 0, 272, 0 },
-	.vfront_porch = { 0, 4, 0 },
-	.vback_porch = { 0, 2, 0 },
-	.vsync_len = { 0, 10, 0 },
-
-	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
-		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data overo_lcd43_pdata = {
-	.name                   = "lcd43",
-	.source                 = "dpi.0",
-
-	.data_lines		= 24,
-
-	.display_timing		= &overo_lcd43_videomode,
-
-	.enable_gpio		= OVERO_GPIO_LCD_EN,
-	.backlight_gpio		= OVERO_GPIO_LCD_BL,
-};
-
-static struct platform_device overo_lcd43_device = {
-	.name                   = "panel-dpi",
-	.id                     = 0,
-	.dev.platform_data      = &overo_lcd43_pdata,
-};
-
-static struct connector_dvi_platform_data overo_dvi_connector_pdata = {
-	.name                   = "dvi",
-	.source                 = "tfp410.0",
-	.i2c_bus_num            = 3,
-};
-
-static struct platform_device overo_dvi_connector_device = {
-	.name                   = "connector-dvi",
-	.id                     = 0,
-	.dev.platform_data      = &overo_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data overo_tfp410_pdata = {
-	.name                   = "tfp410.0",
-	.source                 = "dpi.0",
-	.data_lines             = 24,
-	.power_down_gpio        = -1,
-};
-
-static struct platform_device overo_tfp410_device = {
-	.name                   = "tfp410",
-	.id                     = 0,
-	.dev.platform_data      = &overo_tfp410_pdata,
-};
-
-static struct omap_dss_board_info overo_dss_data = {
-	.default_display_name = "lcd43",
-};
-
-static void __init overo_display_init(void)
-{
-	omap_display_init(&overo_dss_data);
-
-	if (!overo_use_lcd35)
-		platform_device_register(&overo_lcd43_device);
-	platform_device_register(&overo_tfp410_device);
-	platform_device_register(&overo_dvi_connector_device);
-	platform_device_register(&overo_tv_connector_device);
-}
-
-static struct mtd_partition overo_nand_partitions[] = {
-	{
-		.name           = "xloader",
-		.offset         = 0,			/* Offset = 0x00000 */
-		.size           = 4 * NAND_BLOCK_SIZE,
-		.mask_flags     = MTD_WRITEABLE
-	},
-	{
-		.name           = "uboot",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size           = 14 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "uboot environment",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x240000 */
-		.size           = 2 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "linux",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
-		.size           = 32 * NAND_BLOCK_SIZE,
-	},
-	{
-		.name           = "rootfs",
-		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
-		.size           = MTDPART_SIZ_FULL,
-	},
-};
-
-static struct omap2_hsmmc_info mmc[] = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.transceiver	= true,
-		.ocr_mask	= 0x00100000,	/* 3.3V */
-	},
-	{}	/* Terminator */
-};
-
-static struct regulator_consumer_supply overo_vmmc1_supply[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-#include <linux/leds.h>
-
-static struct gpio_led gpio_leds[] = {
-	{
-		.name			= "overo:red:gpio21",
-		.default_trigger	= "heartbeat",
-		.gpio			= 21,
-		.active_low		= true,
-	},
-	{
-		.name			= "overo:blue:gpio22",
-		.default_trigger	= "none",
-		.gpio			= 22,
-		.active_low		= true,
-	},
-	{
-		.name			= "overo:blue:COM",
-		.default_trigger	= "mmc0",
-		.gpio			= -EINVAL,	/* gets replaced */
-		.active_low		= true,
-	},
-};
-
-static struct gpio_led_platform_data gpio_leds_pdata = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device gpio_leds_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_leds_pdata,
-	},
-};
-
-static void __init overo_init_led(void)
-{
-	platform_device_register(&gpio_leds_device);
-}
-
-#else
-static inline void __init overo_init_led(void) { return; }
-#endif
-
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-static struct gpio_keys_button gpio_buttons[] = {
-	{
-		.code			= BTN_0,
-		.gpio			= 23,
-		.desc			= "button0",
-		.wakeup			= 1,
-	},
-	{
-		.code			= BTN_1,
-		.gpio			= 14,
-		.desc			= "button1",
-		.wakeup			= 1,
-	},
-};
-
-static struct gpio_keys_platform_data gpio_keys_pdata = {
-	.buttons	= gpio_buttons,
-	.nbuttons	= ARRAY_SIZE(gpio_buttons),
-};
-
-static struct platform_device gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev	= {
-		.platform_data	= &gpio_keys_pdata,
-	},
-};
-
-static void __init overo_init_keys(void)
-{
-	platform_device_register(&gpio_keys_device);
-}
-
-#else
-static inline void __init overo_init_keys(void) { return; }
-#endif
-
-static int overo_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
-	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
-	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
-#endif
-
-	return 0;
-}
-
-static struct twl4030_gpio_platform_data overo_gpio_data = {
-	.use_leds	= true,
-	.setup		= overo_twl_gpio_setup,
-};
-
-static struct regulator_init_data overo_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(overo_vmmc1_supply),
-	.consumer_supplies	= overo_vmmc1_supply,
-};
-
-static struct twl4030_platform_data overo_twldata = {
-	.gpio		= &overo_gpio_data,
-	.vmmc1		= &overo_vmmc1,
-};
-
-static int __init overo_i2c_init(void)
-{
-	omap3_pmic_get_config(&overo_twldata,
-			TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO,
-			TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
-
-	overo_twldata.vpll2->constraints.name = "VDVI";
-
-	omap3_pmic_init("tps65950", &overo_twldata);
-	/* i2c2 pins are used for gpio */
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-static struct panel_lb035q02_platform_data overo_lcd35_pdata = {
-	.name                   = "lcd35",
-	.source                 = "dpi.0",
-
-	.data_lines		= 24,
-
-	.enable_gpio		= OVERO_GPIO_LCD_EN,
-	.backlight_gpio		= OVERO_GPIO_LCD_BL,
-};
-
-/*
- * NOTE: We need to add either the lgphilips panel, or the lcd43 panel. The
- * selection is done based on the overo_use_lcd35 field. If new SPI
- * devices are added here, extra work is needed to make only the lgphilips panel
- * affected by the overo_use_lcd35 field.
- */
-static struct spi_board_info overo_spi_board_info[] __initdata = {
-	{
-		.modalias		= "panel_lgphilips_lb035q02",
-		.bus_num		= 1,
-		.chip_select		= 1,
-		.max_speed_hz		= 500000,
-		.mode			= SPI_MODE_3,
-		.platform_data		= &overo_lcd35_pdata,
-	},
-};
-
-static int __init overo_spi_init(void)
-{
-	overo_ads7846_init();
-
-	if (overo_use_lcd35) {
-		spi_register_board_info(overo_spi_board_info,
-				ARRAY_SIZE(overo_spi_board_info));
-	}
-	return 0;
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = OVERO_GPIO_USBH_NRESET,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct gpio overo_bt_gpios[] __initdata = {
-	{ OVERO_GPIO_BT_XGATE,	GPIOF_OUT_INIT_LOW,	"lcd enable"    },
-	{ OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH,	"lcd bl enable" },
-};
-
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x.0"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.0"),
-	REGULATOR_SUPPLY("vddvario", "smsc911x.1"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x.1"),
-};
-
-static void __init overo_init(void)
-{
-	int ret;
-
-	if (strstr(boot_command_line, "omapdss.def_disp=lcd35"))
-		overo_use_lcd35 = true;
-
-	regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	overo_i2c_init();
-	omap_hsmmc_init(mmc);
-	omap_serial_init();
-	omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-				  mt46h32m32lf6_sdrc_params);
-	board_nand_init(overo_nand_partitions,
-			ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-
-	usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-	usbhs_init(&usbhs_bdata);
-	overo_spi_init();
-	overo_init_smsc911x();
-	overo_init_led();
-	overo_init_keys();
-	omap_twl4030_audio_init("overo", NULL);
-
-	overo_display_init();
-
-	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
-	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
-
-	ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH,
-			       "OVERO_GPIO_W2W_NRESET");
-	if (ret == 0) {
-		gpio_export(OVERO_GPIO_W2W_NRESET, 0);
-		gpio_set_value(OVERO_GPIO_W2W_NRESET, 0);
-		udelay(10);
-		gpio_set_value(OVERO_GPIO_W2W_NRESET, 1);
-	} else {
-		pr_err("could not obtain gpio for OVERO_GPIO_W2W_NRESET\n");
-	}
-
-	ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios));
-	if (ret) {
-		pr_err("%s: could not obtain BT gpios\n", __func__);
-	} else {
-		gpio_export(OVERO_GPIO_BT_XGATE, 0);
-		gpio_export(OVERO_GPIO_BT_NRESET, 0);
-		gpio_set_value(OVERO_GPIO_BT_NRESET, 0);
-		mdelay(6);
-		gpio_set_value(OVERO_GPIO_BT_NRESET, 1);
-	}
-
-	ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH,
-			       "OVERO_GPIO_USBH_CPEN");
-	if (ret == 0)
-		gpio_export(OVERO_GPIO_USBH_CPEN, 0);
-	else
-		pr_err("could not obtain gpio for OVERO_GPIO_USBH_CPEN\n");
-}
-
-MACHINE_START(OVERO, "Gumstix Overo")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap35xx_init_early,
-	.init_irq	= omap3_init_irq,
-	.init_machine	= overo_init,
-	.init_late	= omap35xx_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END