Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC DT updates from Arnd Bergmann:
 "As usual, there are many patches addressing minor issues in existing
  DTS files, such as DTC warnings, or adding support for additional
  peripherals.

  There are three added SoCs in existing product families:

   - Amazon:

     Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs,
     otherwise known as AL73400 or first-generation Graviton, and
     following the already supported Cortex-A1`5 and Cortex-A57 based
     Alpine chips. This one is added together with the official
     Evaluation platform.

   - Qualcomm:

     The Snapdragon SDM630 platform is a family of mid-range mobile
     phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total
     of five end-user products are added based on these, all Android
     phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra.

   - Renesas:

     RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G
     family, and apparently closely related to the RZ/G2N and RZ/G2M
     models we already support but has a faster GPU and additional
     on-chip peripherals. It is added along with the HopeRun HiHope
     RZ/G2H development board

  A small number of new boards for already supported SoCs also debut:

   - Allwinner sunxi:

     Only one new machine, revision v1.2 of the Pine64 PinePhone
     (non-Android) smartphone, containing minor changes compared to
     earlier versions.

   - Amlogic Meson:

     WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box

   - Aspeed:

     EthanolX is AMD's EPYC data center rerence platform, using an
     ASpeed AST2600 baseboard management controller.

   - Mediatek:

     Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based
     on the MT8183 (Helio P60t) SoC.

   - Nvidia Tegra:

     ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android
     tablets from around 2012 using Tegra 3 and Tegra 2, respectively.
     Thanks to PostmarketOS, these can now run mainline kernels and
     become useful again.

     The Jetson Xavier NX Developer Kit uses a SoM and carrier board for
     the Tegra194, their latest 64-bit chip based on Carmel CPU cores
     and Volta graphics.

   - NXP i.MX:

     Five new boards based on the 32-bit i.MX6 series are added: The
     MYiR MYS-6ULX single-board computer, and four different models of
     industrial computers from Protonic.

   - Qualcomm:

     MikroTik RouterBoard 3011 is a rackmounted router based on the
     32-bit IPQ8064 networking SoC

     Three older phones get added, the Snapdragon 808 (msm8992) based
     Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running
     Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia
     Z5.

   - Renesas:

     In addition to the HiHope RZ/G2H board mentioned above, we gain
     support for board versions 3.0 and 4.0 of the earlier RZ/G2M and
     RZ/G2N reference boards. Beacon EmbeddedWorks adds another
     SoM+Carrier development board for RZ/G2M.

   - Rockchips:

     Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is
     based on, using the high-end 32-bit rk3288 SoC.

  Notable updates to existing platforms are usually for added on-chip
  peripherals, including:

   - ASpeed AST2xxx (various)

   - Allwinner (cpufreq, thermal, Pinephone touchscreen)

   - Amlogic Meson (audio, gpu dvdfs, board updates)

   - Arm Versatile

   - Broadcom (board updates for switch ports, Raspberry pi clock updates)

   - Hisilicon (various)

   - Intel/Altera SoCFPGA (various)

   - Marvell Armada 7xxx/8xxx (smmu)

   - Marvell MMP (GPU on mmp2/mmp3)

   - Mediatek mt8183 (USB, pericfg)

   - NXP Layerscape (VPU, thermal, DSPI)

   - NXP i.MX (VPU, bindings, board updates)

   - Nvidia Tegra194 (GPU)

   - Qualcomm (GPU, Interconnect, ...)

   - Renesas R-Car (SPI, IPMMU, board updates)

   - STMicroelectronics STM32 (various)

   - Samsung Exynos (various)

   - Socionext Uniphier (updates to serial, and pcie)

   - TI K3 (serdes, usb3, audio, sd, chipid)

   - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)"

* tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits)
  arm64: dts: meson: odroid-n2: add jack audio output support
  arm64: dts: meson: odroid-n2: enable audio loopback
  ARM: dts: berlin: Align L2 cache-controller nodename with dtschema
  arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree
  arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree
  arm64: dts: qcom: msm8992: Add RPMCC node
  arm64: dts: qcom: msm8992: Add PSCI support.
  arm64: dts: qcom: msm8992: Add PMU node
  arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes
  arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device
  arm64: dts: qcom: msm8992: Add a SCM node
  arm64: dts: qcom: msm8992: Add a proper CPU map
  arm64: dts: qcom: bullhead: Move UART pinctrl to SoC
  arm64: dts: qcom: bullhead: Add qcom,msm-id
  arm64: dts: qcom: msm8992: Fix SDHCI1
  arm64: dts: qcom: msm8992: Modernize the DTS style
  arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
  arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
  arm64: dts: qcom: msm8994: Add support for SMD RPM
  arm64: dts: qcom: msm8992: Add a label to rpm-requests
  ...

5 files changed, 2 insertions, 645 deletions

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index ca02f91237e3..b6c7d98a9eff 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -2342,44 +2342,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__sham = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_core -> AES */
-static struct omap_hwmod_class_sysconfig omap3_aes_sysc = {
-	.rev_offs	= 0x44,
-	.sysc_offs	= 0x48,
-	.syss_offs	= 0x4c,
-	.sysc_flags	= (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap3xxx_aes_sysc_fields,
-};
-
-static struct omap_hwmod_class omap3xxx_aes_class = {
-	.name	= "aes",
-	.sysc	= &omap3_aes_sysc,
-};
-
-
-static struct omap_hwmod omap3xxx_aes_hwmod = {
-	.name		= "aes",
-	.main_clk	= "aes2_ick",
-	.prcm		= {
-		.omap2 = {
-			.module_offs = CORE_MOD,
-			.idlest_reg_id = 1,
-			.idlest_idle_bit = OMAP3430_ST_AES2_SHIFT,
-		},
-	},
-	.class		= &omap3xxx_aes_class,
-};
-
-
-static struct omap_hwmod_ocp_if omap3xxx_l4_core__aes = {
-	.master		= &omap3xxx_l4_core_hwmod,
-	.slave		= &omap3xxx_aes_hwmod,
-	.clk		= "aes2_ick",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /*
  * 'ssi' class
  * synchronous serial interface (multichannel and full-duplex serial if)
@@ -2473,20 +2435,11 @@ static struct omap_hwmod_ocp_if *omap34xx_sham_hwmod_ocp_ifs[] __initdata = {
 	NULL,
 };
 
-static struct omap_hwmod_ocp_if *omap34xx_aes_hwmod_ocp_ifs[] __initdata = {
-	&omap3xxx_l4_core__aes,
-	NULL,
-};
-
 static struct omap_hwmod_ocp_if *omap36xx_sham_hwmod_ocp_ifs[] __initdata = {
 	&omap3xxx_l4_core__sham,
 	NULL
 };
 
-static struct omap_hwmod_ocp_if *omap36xx_aes_hwmod_ocp_ifs[] __initdata = {
-	&omap3xxx_l4_core__aes,
-	NULL
-};
 
 /*
  * Apparently the SHA/MD5 and AES accelerator IP blocks are
@@ -2501,11 +2454,6 @@ static struct omap_hwmod_ocp_if *am35xx_sham_hwmod_ocp_ifs[] __initdata = {
 	NULL
 };
 
-static struct omap_hwmod_ocp_if *am35xx_aes_hwmod_ocp_ifs[] __initdata = {
-	/* &omap3xxx_l4_core__aes, */
-	NULL,
-};
-
 /* 3430ES1-only hwmod links */
 static struct omap_hwmod_ocp_if *omap3430es1_hwmod_ocp_ifs[] __initdata = {
 	&omap3430es1_dss__l3,
@@ -2641,7 +2589,6 @@ int __init omap3xxx_hwmod_init(void)
 {
 	int r;
 	struct omap_hwmod_ocp_if **h = NULL, **h_sham = NULL;
-	struct omap_hwmod_ocp_if **h_aes = NULL;
 	struct device_node *bus;
 	unsigned int rev;
 
@@ -2664,16 +2611,13 @@ int __init omap3xxx_hwmod_init(void)
 	    rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) {
 		h = omap34xx_hwmod_ocp_ifs;
 		h_sham = omap34xx_sham_hwmod_ocp_ifs;
-		h_aes = omap34xx_aes_hwmod_ocp_ifs;
 	} else if (rev == AM35XX_REV_ES1_0 || rev == AM35XX_REV_ES1_1) {
 		h = am35xx_hwmod_ocp_ifs;
 		h_sham = am35xx_sham_hwmod_ocp_ifs;
-		h_aes = am35xx_aes_hwmod_ocp_ifs;
 	} else if (rev == OMAP3630_REV_ES1_0 || rev == OMAP3630_REV_ES1_1 ||
 		   rev == OMAP3630_REV_ES1_2) {
 		h = omap36xx_hwmod_ocp_ifs;
 		h_sham = omap36xx_sham_hwmod_ocp_ifs;
-		h_aes = omap36xx_aes_hwmod_ocp_ifs;
 	} else {
 		WARN(1, "OMAP3 hwmod family init: unknown chip type\n");
 		return -EINVAL;
@@ -2696,11 +2640,6 @@ int __init omap3xxx_hwmod_init(void)
 			goto put_node;
 	}
 
-	if (h_aes && omap3xxx_hwmod_is_hs_ip_block_usable(bus, "aes")) {
-		r = omap_hwmod_register_links(h_aes);
-		if (r < 0)
-			goto put_node;
-	}
 	of_node_put(bus);
 
 	/*
diff --git a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
index 3f338732ee6c..b88d12de68a2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_43xx_data.c
@@ -85,49 +85,6 @@ static struct omap_hwmod am43xx_control_hwmod = {
 	},
 };
 
-static struct omap_hwmod_class_sysconfig am43xx_usb_otg_ss_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
-				SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-				SIDLE_SMART_WKUP | MSTANDBY_FORCE |
-				MSTANDBY_NO | MSTANDBY_SMART |
-				MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class am43xx_usb_otg_ss_hwmod_class = {
-	.name	= "usb_otg_ss",
-	.sysc	= &am43xx_usb_otg_ss_sysc,
-};
-
-static struct omap_hwmod am43xx_usb_otg_ss0_hwmod = {
-	.name		= "usb_otg_ss0",
-	.class		= &am43xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "l3s_gclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs	= AM43XX_CM_PER_USB_OTG_SS0_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-static struct omap_hwmod am43xx_usb_otg_ss1_hwmod = {
-	.name		= "usb_otg_ss1",
-	.class		= &am43xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3s_clkdm",
-	.main_clk	= "l3s_gclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs	= AM43XX_CM_PER_USB_OTG_SS1_CLKCTRL_OFFSET,
-			.modulemode	= MODULEMODE_SWCTRL,
-		},
-	},
-};
-
 /* Interfaces */
 static struct omap_hwmod_ocp_if am43xx_l3_main__emif = {
 	.master		= &am33xx_l3_main_hwmod,
@@ -178,20 +135,6 @@ static struct omap_hwmod_ocp_if am43xx_l4_wkup__control = {
 	.user		= OCP_USER_MPU,
 };
 
-static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss0 = {
-	.master         = &am33xx_l3_s_hwmod,
-	.slave          = &am43xx_usb_otg_ss0_hwmod,
-	.clk            = "l3s_gclk",
-	.user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-static struct omap_hwmod_ocp_if am43xx_l3_s__usbotgss1 = {
-	.master         = &am33xx_l3_s_hwmod,
-	.slave          = &am43xx_usb_otg_ss1_hwmod,
-	.clk            = "l3s_gclk",
-	.user           = OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am33xx_mpu__l3_main,
 	&am33xx_mpu__prcm,
@@ -211,8 +154,6 @@ static struct omap_hwmod_ocp_if *am43xx_hwmod_ocp_ifs[] __initdata = {
 	&am43xx_l4_wkup__smartreflex1,
 	&am33xx_l3_s__gpmc,
 	&am33xx_l3_main__ocmc,
-	&am43xx_l3_s__usbotgss0,
-	&am43xx_l3_s__usbotgss1,
 	NULL,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index de13c46b984f..665ca74a834a 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -640,154 +640,6 @@ static struct omap_hwmod omap44xx_sl2if_hwmod = {
 };
 
 /*
- * 'usb_host_fs' class
- * full-speed usb host controller
- */
-
-/* The IP is not compliant to type1 / type2 scheme */
-static struct omap_hwmod_class_sysconfig omap44xx_usb_host_fs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0210,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type_usb_host_fs,
-};
-
-static struct omap_hwmod_class omap44xx_usb_host_fs_hwmod_class = {
-	.name	= "usb_host_fs",
-	.sysc	= &omap44xx_usb_host_fs_sysc,
-};
-
-/* usb_host_fs */
-static struct omap_hwmod omap44xx_usb_host_fs_hwmod = {
-	.name		= "usb_host_fs",
-	.class		= &omap44xx_usb_host_fs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "usb_host_fs_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_FS_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_USB_HOST_FS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'usb_host_hs' class
- * high-speed multi-port usb host controller
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_usb_host_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSC_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap44xx_usb_host_hs_hwmod_class = {
-	.name	= "usb_host_hs",
-	.sysc	= &omap44xx_usb_host_hs_sysc,
-};
-
-/* usb_host_hs */
-static struct omap_hwmod omap44xx_usb_host_hs_hwmod = {
-	.name		= "usb_host_hs",
-	.class		= &omap44xx_usb_host_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "usb_host_hs_fck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_USB_HOST_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-
-	/*
-	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
-	 * id: i660
-	 *
-	 * Description:
-	 * In the following configuration :
-	 * - USBHOST module is set to smart-idle mode
-	 * - PRCM asserts idle_req to the USBHOST module ( This typically
-	 *   happens when the system is going to a low power mode : all ports
-	 *   have been suspended, the master part of the USBHOST module has
-	 *   entered the standby state, and SW has cut the functional clocks)
-	 * - an USBHOST interrupt occurs before the module is able to answer
-	 *   idle_ack, typically a remote wakeup IRQ.
-	 * Then the USB HOST module will enter a deadlock situation where it
-	 * is no more accessible nor functional.
-	 *
-	 * Workaround:
-	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
-	 */
-
-	/*
-	 * Errata: USB host EHCI may stall when entering smart-standby mode
-	 * Id: i571
-	 *
-	 * Description:
-	 * When the USBHOST module is set to smart-standby mode, and when it is
-	 * ready to enter the standby state (i.e. all ports are suspended and
-	 * all attached devices are in suspend mode), then it can wrongly assert
-	 * the Mstandby signal too early while there are still some residual OCP
-	 * transactions ongoing. If this condition occurs, the internal state
-	 * machine may go to an undefined state and the USB link may be stuck
-	 * upon the next resume.
-	 *
-	 * Workaround:
-	 * Don't use smart standby; use only force standby,
-	 * hence HWMOD_SWSUP_MSTANDBY
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-};
-
-/*
- * 'usb_tll_hs' class
- * usb_tll_hs module is the adapter on the usb_host_hs ports
- */
-
-static struct omap_hwmod_class_sysconfig omap44xx_usb_tll_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET |
-			   SYSC_HAS_AUTOIDLE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap44xx_usb_tll_hs_hwmod_class = {
-	.name	= "usb_tll_hs",
-	.sysc	= &omap44xx_usb_tll_hs_sysc,
-};
-
-static struct omap_hwmod omap44xx_usb_tll_hs_hwmod = {
-	.name		= "usb_tll_hs",
-	.class		= &omap44xx_usb_tll_hs_hwmod_class,
-	.clkdm_name	= "l3_init_clkdm",
-	.main_clk	= "usb_tll_hs_ick",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_OFFSET,
-			.context_offs = OMAP4_RM_L3INIT_USB_TLL_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
  * interfaces
  */
 
@@ -895,22 +747,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* usb_host_fs -> l3_main_2 */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = {
-	.master		= &omap44xx_usb_host_fs_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* usb_host_hs -> l3_main_2 */
-static struct omap_hwmod_ocp_if omap44xx_usb_host_hs__l3_main_2 = {
-	.master		= &omap44xx_usb_host_hs_hwmod,
-	.slave		= &omap44xx_l3_main_2_hwmod,
-	.clk		= "l3_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> l3_main_3 */
 static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = {
 	.master		= &omap44xx_l3_main_1_hwmod,
@@ -1119,30 +955,6 @@ static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> usb_host_fs */
-static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_usb_host_fs_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> usb_host_hs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_hs = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_usb_host_hs_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> usb_tll_hs */
-static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_tll_hs = {
-	.master		= &omap44xx_l4_cfg_hwmod,
-	.slave		= &omap44xx_usb_tll_hs_hwmod,
-	.clk		= "l4_div_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* mpu -> emif1 */
 static struct omap_hwmod_ocp_if omap44xx_mpu__emif1 = {
 	.master		= &omap44xx_mpu_hwmod,
@@ -1173,8 +985,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_iva__l3_main_2,
 	&omap44xx_l3_main_1__l3_main_2,
 	&omap44xx_l4_cfg__l3_main_2,
-	/* &omap44xx_usb_host_fs__l3_main_2, */
-	&omap44xx_usb_host_hs__l3_main_2,
 	&omap44xx_l3_main_1__l3_main_3,
 	&omap44xx_l3_main_2__l3_main_3,
 	&omap44xx_l4_cfg__l3_main_3,
@@ -1201,9 +1011,6 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = {
 	&omap44xx_l4_wkup__prm,
 	&omap44xx_l4_wkup__scrm,
 	/* &omap44xx_l3_main_2__sl2if, */
-	/* &omap44xx_l4_cfg__usb_host_fs, */
-	&omap44xx_l4_cfg__usb_host_hs,
-	&omap44xx_l4_cfg__usb_tll_hs,
 	&omap44xx_mpu__emif1,
 	&omap44xx_mpu__emif2,
 	NULL,
diff --git a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
index 4cb194ac7a7e..7c38c1ba58ac 100644
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -267,158 +267,6 @@ static struct omap_hwmod omap54xx_mpu_hwmod = {
 };
 
 /*
- * 'usb_host_hs' class
- * high-speed multi-port usb host controller
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_usb_host_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
-			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_usb_host_hs_hwmod_class = {
-	.name	= "usb_host_hs",
-	.sysc	= &omap54xx_usb_host_hs_sysc,
-};
-
-static struct omap_hwmod omap54xx_usb_host_hs_hwmod = {
-	.name		= "usb_host_hs",
-	.class		= &omap54xx_usb_host_hs_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	/*
-	 * Errata: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
-	 * id: i660
-	 *
-	 * Description:
-	 * In the following configuration :
-	 * - USBHOST module is set to smart-idle mode
-	 * - PRCM asserts idle_req to the USBHOST module ( This typically
-	 *   happens when the system is going to a low power mode : all ports
-	 *   have been suspended, the master part of the USBHOST module has
-	 *   entered the standby state, and SW has cut the functional clocks)
-	 * - an USBHOST interrupt occurs before the module is able to answer
-	 *   idle_ack, typically a remote wakeup IRQ.
-	 * Then the USB HOST module will enter a deadlock situation where it
-	 * is no more accessible nor functional.
-	 *
-	 * Workaround:
-	 * Don't use smart idle; use only force idle, hence HWMOD_SWSUP_SIDLE
-	 */
-
-	/*
-	 * Errata: USB host EHCI may stall when entering smart-standby mode
-	 * Id: i571
-	 *
-	 * Description:
-	 * When the USBHOST module is set to smart-standby mode, and when it is
-	 * ready to enter the standby state (i.e. all ports are suspended and
-	 * all attached devices are in suspend mode), then it can wrongly assert
-	 * the Mstandby signal too early while there are still some residual OCP
-	 * transactions ongoing. If this condition occurs, the internal state
-	 * machine may go to an undefined state and the USB link may be stuck
-	 * upon the next resume.
-	 *
-	 * Workaround:
-	 * Don't use smart standby; use only force standby,
-	 * hence HWMOD_SWSUP_MSTANDBY
-	 */
-
-	.flags		= HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY,
-	.main_clk	= "l3init_60m_fclk",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_HOST_HS_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INIT_USB_HOST_HS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_SWCTRL,
-		},
-	},
-};
-
-/*
- * 'usb_tll_hs' class
- * usb_tll_hs module is the adapter on the usb_host_hs ports
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_usb_tll_hs_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.syss_offs	= 0x0014,
-	.sysc_flags	= (SYSC_HAS_AUTOIDLE | SYSC_HAS_CLOCKACTIVITY |
-			   SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
-			   SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
-	.sysc_fields	= &omap_hwmod_sysc_type1,
-};
-
-static struct omap_hwmod_class omap54xx_usb_tll_hs_hwmod_class = {
-	.name	= "usb_tll_hs",
-	.sysc	= &omap54xx_usb_tll_hs_sysc,
-};
-
-static struct omap_hwmod omap54xx_usb_tll_hs_hwmod = {
-	.name		= "usb_tll_hs",
-	.class		= &omap54xx_usb_tll_hs_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "l4_root_clk_div",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_TLL_HS_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INIT_USB_TLL_HS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
- * 'usb_otg_ss' class
- * 2.0 super speed (usb_otg_ss) controller
- */
-
-static struct omap_hwmod_class_sysconfig omap54xx_usb_otg_ss_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class omap54xx_usb_otg_ss_hwmod_class = {
-	.name	= "usb_otg_ss",
-	.sysc	= &omap54xx_usb_otg_ss_sysc,
-};
-
-/* usb_otg_ss */
-static struct omap_hwmod_opt_clk usb_otg_ss_opt_clks[] = {
-	{ .role = "refclk960m", .clk = "usb_otg_ss_refclk960m" },
-};
-
-static struct omap_hwmod omap54xx_usb_otg_ss_hwmod = {
-	.name		= "usb_otg_ss",
-	.class		= &omap54xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.flags		= HWMOD_SWSUP_SIDLE,
-	.main_clk	= "dpll_core_h13x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = OMAP54XX_CM_L3INIT_USB_OTG_SS_CLKCTRL_OFFSET,
-			.context_offs = OMAP54XX_RM_L3INIT_USB_OTG_SS_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= usb_otg_ss_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_ss_opt_clks),
-};
-
-/*
  * 'sata' class
  * sata:  serial ata interface  gen2 compliant   ( 1 rx/ 1 tx)
  */
@@ -619,30 +467,6 @@ static struct omap_hwmod_ocp_if omap54xx_l4_cfg__mpu = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_cfg -> usb_host_hs */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_host_hs = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_usb_host_hs_hwmod,
-	.clk		= "l3_iclk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> usb_tll_hs */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_tll_hs = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_usb_tll_hs_hwmod,
-	.clk		= "l4_root_clk_div",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_cfg -> usb_otg_ss */
-static struct omap_hwmod_ocp_if omap54xx_l4_cfg__usb_otg_ss = {
-	.master		= &omap54xx_l4_cfg_hwmod,
-	.slave		= &omap54xx_usb_otg_ss_hwmod,
-	.clk		= "dpll_core_h13x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_l3_main_1__dmm,
 	&omap54xx_l3_main_3__l3_instr,
@@ -663,9 +487,6 @@ static struct omap_hwmod_ocp_if *omap54xx_hwmod_ocp_ifs[] __initdata = {
 	&omap54xx_mpu__emif1,
 	&omap54xx_mpu__emif2,
 	&omap54xx_l4_cfg__mpu,
-	&omap54xx_l4_cfg__usb_host_hs,
-	&omap54xx_l4_cfg__usb_tll_hs,
-	&omap54xx_l4_cfg__usb_otg_ss,
 	&omap54xx_l4_cfg__sata,
 	NULL,
 };
diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 07b7458deae4..adb07848de96 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -492,101 +492,6 @@ static struct omap_hwmod dra7xx_sata_hwmod = {
 };
 
 /*
- * 'usb_otg_ss' class
- *
- */
-
-static struct omap_hwmod_class_sysconfig dra7xx_usb_otg_ss_sysc = {
-	.rev_offs	= 0x0000,
-	.sysc_offs	= 0x0010,
-	.sysc_flags	= (SYSC_HAS_DMADISABLE | SYSC_HAS_MIDLEMODE |
-			   SYSC_HAS_SIDLEMODE),
-	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
-			   SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO |
-			   MSTANDBY_SMART | MSTANDBY_SMART_WKUP),
-	.sysc_fields	= &omap_hwmod_sysc_type2,
-};
-
-static struct omap_hwmod_class dra7xx_usb_otg_ss_hwmod_class = {
-	.name	= "usb_otg_ss",
-	.sysc	= &dra7xx_usb_otg_ss_sysc,
-};
-
-/* usb_otg_ss1 */
-static struct omap_hwmod_opt_clk usb_otg_ss1_opt_clks[] = {
-	{ .role = "refclk960m", .clk = "usb_otg_ss1_refclk960m" },
-};
-
-static struct omap_hwmod dra7xx_usb_otg_ss1_hwmod = {
-	.name		= "usb_otg_ss1",
-	.class		= &dra7xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "dpll_core_h13x2_ck",
-	.flags		= HWMOD_CLKDM_NOAUTO,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS1_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS1_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= usb_otg_ss1_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_ss1_opt_clks),
-};
-
-/* usb_otg_ss2 */
-static struct omap_hwmod_opt_clk usb_otg_ss2_opt_clks[] = {
-	{ .role = "refclk960m", .clk = "usb_otg_ss2_refclk960m" },
-};
-
-static struct omap_hwmod dra7xx_usb_otg_ss2_hwmod = {
-	.name		= "usb_otg_ss2",
-	.class		= &dra7xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "dpll_core_h13x2_ck",
-	.flags		= HWMOD_CLKDM_NOAUTO,
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS2_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS2_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-	.opt_clks	= usb_otg_ss2_opt_clks,
-	.opt_clks_cnt	= ARRAY_SIZE(usb_otg_ss2_opt_clks),
-};
-
-/* usb_otg_ss3 */
-static struct omap_hwmod dra7xx_usb_otg_ss3_hwmod = {
-	.name		= "usb_otg_ss3",
-	.class		= &dra7xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "dpll_core_h13x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS3_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS3_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/* usb_otg_ss4 */
-static struct omap_hwmod dra7xx_usb_otg_ss4_hwmod = {
-	.name		= "usb_otg_ss4",
-	.class		= &dra7xx_usb_otg_ss_hwmod_class,
-	.clkdm_name	= "l3init_clkdm",
-	.main_clk	= "dpll_core_h13x2_ck",
-	.prcm = {
-		.omap4 = {
-			.clkctrl_offs = DRA7XX_CM_L3INIT_USB_OTG_SS4_CLKCTRL_OFFSET,
-			.context_offs = DRA7XX_RM_L3INIT_USB_OTG_SS4_CONTEXT_OFFSET,
-			.modulemode   = MODULEMODE_HWCTRL,
-		},
-	},
-};
-
-/*
  * 'vcp' class
  *
  */
@@ -813,38 +718,6 @@ static struct omap_hwmod_ocp_if dra7xx_l4_cfg__sata = {
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
-/* l4_per3 -> usb_otg_ss1 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_usb_otg_ss1_hwmod,
-	.clk		= "dpll_core_h13x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> usb_otg_ss2 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss2 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_usb_otg_ss2_hwmod,
-	.clk		= "dpll_core_h13x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> usb_otg_ss3 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss3 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_usb_otg_ss3_hwmod,
-	.clk		= "dpll_core_h13x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
-/* l4_per3 -> usb_otg_ss4 */
-static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss4 = {
-	.master		= &dra7xx_l4_per3_hwmod,
-	.slave		= &dra7xx_usb_otg_ss4_hwmod,
-	.clk		= "dpll_core_h13x2_ck",
-	.user		= OCP_USER_MPU | OCP_USER_SDMA,
-};
-
 /* l3_main_1 -> vcp1 */
 static struct omap_hwmod_ocp_if dra7xx_l3_main_1__vcp1 = {
 	.master		= &dra7xx_l3_main_1_hwmod,
@@ -900,9 +773,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 	&dra7xx_l4_cfg__pciess2,
 	&dra7xx_l3_main_1__qspi,
 	&dra7xx_l4_cfg__sata,
-	&dra7xx_l4_per3__usb_otg_ss1,
-	&dra7xx_l4_per3__usb_otg_ss2,
-	&dra7xx_l4_per3__usb_otg_ss3,
 	&dra7xx_l3_main_1__vcp1,
 	&dra7xx_l4_per2__vcp1,
 	&dra7xx_l3_main_1__vcp2,
@@ -911,20 +781,6 @@ static struct omap_hwmod_ocp_if *dra7xx_hwmod_ocp_ifs[] __initdata = {
 };
 
 /* SoC variant specific hwmod links */
-static struct omap_hwmod_ocp_if *dra76x_hwmod_ocp_ifs[] __initdata = {
-	&dra7xx_l4_per3__usb_otg_ss4,
-	NULL,
-};
-
-static struct omap_hwmod_ocp_if *acd_76x_hwmod_ocp_ifs[] __initdata = {
-	NULL,
-};
-
-static struct omap_hwmod_ocp_if *dra74x_hwmod_ocp_ifs[] __initdata = {
-	&dra7xx_l4_per3__usb_otg_ss4,
-	NULL,
-};
-
 static struct omap_hwmod_ocp_if *dra72x_hwmod_ocp_ifs[] __initdata = {
 	NULL,
 };
@@ -942,21 +798,14 @@ int __init dra7xx_hwmod_init(void)
 	ret = omap_hwmod_register_links(dra7xx_hwmod_ocp_ifs);
 
 	if (!ret && soc_is_dra74x()) {
-		ret = omap_hwmod_register_links(dra74x_hwmod_ocp_ifs);
-		if (!ret)
-			ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
+		ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
 	} else if (!ret && soc_is_dra72x()) {
 		ret = omap_hwmod_register_links(dra72x_hwmod_ocp_ifs);
 		if (!ret && !of_machine_is_compatible("ti,dra718"))
 			ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
 	} else if (!ret && soc_is_dra76x()) {
-		ret = omap_hwmod_register_links(dra76x_hwmod_ocp_ifs);
-
-		if (!ret && soc_is_dra76x_acd()) {
-			ret = omap_hwmod_register_links(acd_76x_hwmod_ocp_ifs);
-		} else if (!ret && soc_is_dra76x_abz()) {
+		if (!ret && soc_is_dra76x_abz())
 			ret = omap_hwmod_register_links(rtc_hwmod_ocp_ifs);
-		}
 	}
 
 	return ret;