Merge tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC multiplatform code updates from Arnd Bergmann:
 "This branch is the culmination of 5 years of effort to bring the ARMv6
  and ARMv7 platforms together such that they can all be enabled and
  boot the same kernel.  It has been a tremendous amount of cleanup and
  refactoring by a huge number of people, and creation of several new
  (and major) subsystems to better abstract out all the platform details
  in an appropriate manner.

  The bulk of this branch is a large patchset from Arnd that brings
  several of the more minor and older platforms we have closer to
  multiplatform support.  Among these are MMP, S3C64xx, Orion5x, mv78xx0
  and realview Much of this is moving around header files from old mach
  directories, but there are also some cleanup patches of debug_ll
  (lowlevel debug per-platform options) and other parts.

  Linus Walleij also has some patchs to clean up the older ARM Realview
  platforms by finally introducing DT support, and Rob Herring has some
  for ARM Versatile which is now DT-only.  Both of these platforms are
  now multiplatform.

  Finally, a couple of patches from Russell for Dove PMU, and a fix from
  Valentin Rothberg for Exynos ADC, which were rebased on top of the
  series to avoid conflicts"

* tag 'armsoc-multiplatform' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (75 commits)
  ARM: realview: don't select SMP_ON_UP for UP builds
  ARM: s3c: simplify s3c_irqwake_{e,}intallow definition
  ARM: s3c64xx: fix pm-debug compilation
  iio: exynos-adc: fix irqf_oneshot.cocci warnings
  ARM: realview: build realview-dt SMP support only when used
  ARM: realview: select apropriate targets
  ARM: realview: clean up header files
  ARM: realview: make all header files local
  ARM: no longer make CPU targets visible separately
  ARM: integrator: use explicit core module options
  ARM: realview: enable multiplatform
  ARM: make default platform work for NOMMU
  ARM: debug-ll: move DEBUG_LL_UART_EFM32 to correct Kconfig location
  ARM: defconfig: use correct debug_ll settings
  ARM: versatile: convert to multi-platform
  ARM: versatile: merge mach code into a single file
  ARM: versatile: switch to DT only booting and remove legacy code
  ARM: versatile: add DT based PCI detection
  ARM: pxa: mark ezx structures as __maybe_unused
  ARM: pxa: mark raumfeld init functions as __maybe_unused
  ...

1 files changed, 113 insertions, 0 deletions

diff --git a/arch/arm/mach-pxa/h5000.h b/arch/arm/mach-pxa/h5000.h
new file mode 100644
index 000000000000..252461fd2ac8
--- /dev/null
+++ b/arch/arm/mach-pxa/h5000.h
@@ -0,0 +1,113 @@
+/*
+ * Hardware definitions for HP iPAQ h5xxx Handheld Computers
+ *
+ * Copyright(20)02 Hewlett-Packard Company.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
+ * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
+ * FITNESS FOR ANY PARTICULAR PURPOSE.
+ *
+ * Author: Jamey Hicks
+ */
+
+#ifndef __ASM_ARCH_H5000_H
+#define __ASM_ARCH_H5000_H
+
+#include "mfp-pxa25x.h"
+
+/*
+ * CPU GPIOs
+ */
+
+#define H5000_GPIO_POWER_BUTTON   (0)
+#define H5000_GPIO_RESET_BUTTON_N (1)
+#define H5000_GPIO_OPT_INT        (2)
+#define H5000_GPIO_BACKUP_POWER   (3)
+#define H5000_GPIO_ACTION_BUTTON  (4)
+#define H5000_GPIO_COM_DCD_SOMETHING  (5) /* what is this really ? */
+/* 6 not connected */
+#define H5000_GPIO_RESET_BUTTON_AGAIN_N (7) /* connected to gpio 1 as well */
+/* 8 not connected */
+#define H5000_GPIO_RSO_N          (9)       /* reset output from max1702 which regulates 3.3 and 2.5 */
+#define H5000_GPIO_ASIC_INT_N   (10)       /* from companion asic */
+#define H5000_GPIO_BT_ENV_0     (11)       /* to LMX9814, set to 1 according to regdump */
+/*(12) not connected */
+#define H5000_GPIO_BT_ENV_1     (13)       /* to LMX9814, set to 1 according to regdump */
+#define H5000_GPIO_BT_WU        (14)       /* from LMX9814, Defined as HOST_WAKEUP in the LMX9820 data sheet */
+/*(15) is CS1# */
+/*(16) not connected */
+/*(17) not connected */
+/*(18) is pcmcia ready */
+/*(19) is dreq1 */
+/*(20) is dreq0 */
+#define H5000_GPIO_OE_RD_NWR	(21)       /* output enable on rd/nwr signal to companion asic */
+/*(22) is not connected */
+#define H5000_GPIO_OPT_SPI_CLK  (23)       /* to extension pack */
+#define H5000_GPIO_OPT_SPI_CS_N (24)       /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DOUT (25)       /* to extension pack */
+#define H5000_GPIO_OPT_SPI_DIN  (26)       /* to extension pack */
+/*(27) not connected */
+#define H5000_GPIO_I2S_BITCLK   (28)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAOUT  (29)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_DATAIN   (30)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_LRCLK    (31)       /* connected to AC97 codec */
+#define H5000_GPIO_I2S_SYSCLK   (32)       /* connected to AC97 codec */
+/*(33) is CS5# */
+#define H5000_GPIO_COM_RXD      (34)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_CTS      (35)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DCD      (36)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DSR      (37)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RI       (38)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_TXD      (39)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_DTR      (40)       /* connected to cradle/cable connector */
+#define H5000_GPIO_COM_RTS      (41)       /* connected to cradle/cable connector */
+
+#define H5000_GPIO_BT_RXD       (42)       /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_TXD       (43)       /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_CTS       (44)       /* connected to BT (LMX9814) */
+#define H5000_GPIO_BT_RTS       (45)       /* connected to BT (LMX9814) */
+
+#define H5000_GPIO_IRDA_RXD     (46)
+#define H5000_GPIO_IRDA_TXD     (47)
+
+#define H5000_GPIO_POE_N        (48)       /* used for pcmcia */
+#define H5000_GPIO_PWE_N        (49)       /* used for pcmcia */
+#define H5000_GPIO_PIOR_N       (50)       /* used for pcmcia */
+#define H5000_GPIO_PIOW_N       (51)       /* used for pcmcia */
+#define H5000_GPIO_PCE1_N       (52)       /* used for pcmcia */
+#define H5000_GPIO_PCE2_N       (53)       /* used for pcmcia */
+#define H5000_GPIO_PSKTSEL      (54)       /* used for pcmcia */
+#define H5000_GPIO_PREG_N       (55)       /* used for pcmcia */
+#define H5000_GPIO_PWAIT_N      (56)       /* used for pcmcia */
+#define H5000_GPIO_IOIS16_N     (57)       /* used for pcmcia */
+
+#define H5000_GPIO_IRDA_SD      (58)       /* to hsdl3002 sd */
+/*(59) not connected */
+#define H5000_GPIO_POWER_SD_N   (60)       /* controls power to SD */
+#define H5000_GPIO_POWER_RS232_N	(61)       /* inverted FORCEON to rs232 transceiver */
+#define H5000_GPIO_POWER_ACCEL_N	(62)       /* controls power to accel */
+/*(63) is not connected */
+#define H5000_GPIO_OPT_NVRAM    (64)       /* controls power to expansion pack */
+#define H5000_GPIO_CHG_EN       (65)       /* to sc801 en */
+#define H5000_GPIO_USB_PULLUP   (66)       /* USB d+ pullup via 1.5K resistor */
+#define H5000_GPIO_BT_2V8_N     (67)       /* 2.8V used by bluetooth */
+#define H5000_GPIO_EXT_CHG_RATE (68)       /* enables external charging rate */
+/*(69) is not connected */
+#define H5000_GPIO_CIR_RESET    (70)       /* consumer IR reset */
+#define H5000_GPIO_POWER_LIGHT_SENSOR_N	(71)
+#define H5000_GPIO_BT_M_RESET   (72)
+#define H5000_GPIO_STD_CHG_RATE (73)
+#define H5000_GPIO_SD_WP_N      (74)
+#define H5000_GPIO_MOTOR_ON_N   (75)       /* external pullup on this */
+#define H5000_GPIO_HEADPHONE_DETECT	(76)
+#define H5000_GPIO_USB_CHG_RATE (77)       /* select rate for charging via usb */
+/*(78) is CS2# */
+/*(79) is CS3# */
+/*(80) is CS4# */
+
+#endif /* __ASM_ARCH_H5000_H */