Merge branch 'multiplatform/platform-data' into next/multiplatform

* multiplatform/platform-data:
  ARM: spear: move platform_data definitions
  ARM: samsung: move platform_data definitions
  ARM: orion: move platform_data definitions
  ARM: nomadik: move platform_data definitions
  ARM: w90x900: move platform_data definitions
  ARM: vt8500: move platform_data definitions
  ARM: tegra: move sdhci platform_data definition
  ARM: sa1100: move platform_data definitions
  ARM: pxa: move platform_data definitions
  ARM: netx: move platform_data definitions
  ARM: msm: move platform_data definitions
  ARM: imx: move platform_data definitions
  ARM: ep93xx: move platform_data definitions
  ARM: davinci: move platform_data definitions
  ARM: at91: move platform_data definitions

Conflicts due to removed files:
	arch/arm/mach-tegra/board-harmony.c
	arch/arm/mach-tegra/board-trimslice.c

Conflicts due to code removal:
	arch/arm/mach-tegra/board-paz00.c

Context conflicts in:
	drivers/mmc/host/sdhci-tegra.c
	drivers/net/irda/pxaficp_ir.c

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 0 insertions, 175 deletions

diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
deleted file mode 100644
index 486b4c519ae2..000000000000
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ /dev/null
@@ -1,175 +0,0 @@
-/*
- *  arch/arm/mach-pxa/include/mach/pxafb.h
- *
- *  Support for the xscale frame buffer.
- *
- *  Author:     Jean-Frederic Clere
- *  Created:    Sep 22, 2003
- *  Copyright:  jfclere@sinix.net
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- */
-
-#include <linux/fb.h>
-#include <mach/regs-lcd.h>
-
-/*
- * Supported LCD connections
- *
- * bits 0 - 3: for LCD panel type:
- *
- *   STN  - for passive matrix
- *   DSTN - for dual scan passive matrix
- *   TFT  - for active matrix
- *
- * bits 4 - 9 : for bus width
- * bits 10-17 : for AC Bias Pin Frequency
- * bit     18 : for output enable polarity
- * bit     19 : for pixel clock edge
- * bit     20 : for output pixel format when base is RGBT16
- */
-#define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
-#define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
-
-#define LCD_TYPE_MASK		0xf
-#define LCD_TYPE_UNKNOWN	0
-#define LCD_TYPE_MONO_STN	1
-#define LCD_TYPE_MONO_DSTN	2
-#define LCD_TYPE_COLOR_STN	3
-#define LCD_TYPE_COLOR_DSTN	4
-#define LCD_TYPE_COLOR_TFT	5
-#define LCD_TYPE_SMART_PANEL	6
-#define LCD_TYPE_MAX		7
-
-#define LCD_MONO_STN_4BPP	((4  << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_STN_8BPP	((8  << 4) | LCD_TYPE_MONO_STN)
-#define LCD_MONO_DSTN_8BPP	((8  << 4) | LCD_TYPE_MONO_DSTN)
-#define LCD_COLOR_STN_8BPP	((8  << 4) | LCD_TYPE_COLOR_STN)
-#define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
-#define LCD_COLOR_TFT_8BPP	((8  << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
-#define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_16BPP	((16 << 4) | LCD_TYPE_SMART_PANEL)
-#define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
-
-#define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
-#define LCD_BIAS_ACTIVE_HIGH	(0 << 18)
-#define LCD_BIAS_ACTIVE_LOW	(1 << 18)
-#define LCD_PCLK_EDGE_RISE	(0 << 19)
-#define LCD_PCLK_EDGE_FALL	(1 << 19)
-#define LCD_ALTERNATE_MAPPING	(1 << 20)
-
-/*
- * This structure describes the machine which we are running on.
- * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
- * of linux/drivers/video/pxafb.c
- */
-struct pxafb_mode_info {
-	u_long		pixclock;
-
-	u_short		xres;
-	u_short		yres;
-
-	u_char		bpp;
-	u_int		cmap_greyscale:1,
-			depth:8,
-			transparency:1,
-			unused:22;
-
-	/* Parallel Mode Timing */
-	u_char		hsync_len;
-	u_char		left_margin;
-	u_char		right_margin;
-
-	u_char		vsync_len;
-	u_char		upper_margin;
-	u_char		lower_margin;
-	u_char		sync;
-
-	/* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
-	 * Note:
-	 * 1. all parameters in nanosecond (ns)
-	 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
-	 *    in pxa27x and pxa3xx, initialize them to the same value or
-	 *    the larger one will be used
-	 * 3. same to {rd,wr}_pulse_width
-	 *
-	 * 4. LCD_PCLK_EDGE_{RISE,FALL} controls the L_PCLK_WR polarity
-	 * 5. sync & FB_SYNC_HOR_HIGH_ACT controls the L_LCLK_A0
-	 * 6. sync & FB_SYNC_VERT_HIGH_ACT controls the L_LCLK_RD
-	 */
-	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
-	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
-	unsigned	wr_pulse_width;	/* L_PCLK_WR pulse width */
-	unsigned	rd_pulse_width;	/* L_FCLK_RD pulse width */
-	unsigned	cmd_inh_time;	/* Command Inhibit time between two writes */
-	unsigned	op_hold_time;	/* Output Hold time from L_FCLK_RD negation */
-};
-
-struct pxafb_mach_info {
-	struct pxafb_mode_info *modes;
-	unsigned int num_modes;
-
-	unsigned int	lcd_conn;
-	unsigned long	video_mem_size;
-
-	u_int		fixed_modes:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			acceleration_enabled:1,
-			unused:28;
-
-	/* The following should be defined in LCCR0
-	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
-	 *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
-	 *      LCCR0_Mono or LCCR0_Color       Mono/Color
-	 *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
-	 *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
-	 *
-	 * The following should not be defined in LCCR0:
-	 *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
-	 *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
-	 */
-	u_int		lccr0;
-	/* The following should be defined in LCCR3
-	 *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
-	 *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
-	 *      LCCR3_Acb(X)                    AB Bias pin frequency
-	 *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
-	 *
-	 * The following should not be defined in LCCR3
-	 *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
-	 */
-	u_int		lccr3;
-	/* The following should be defined in LCCR4
-	 *	LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
-	 *
-	 * All other bits in LCCR4 should be left alone.
-	 */
-	u_int		lccr4;
-	void (*pxafb_backlight_power)(int);
-	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
-	void (*smart_update)(struct fb_info *);
-};
-
-void pxa_set_fb_info(struct device *, struct pxafb_mach_info *);
-unsigned long pxafb_get_hsync_time(struct device *dev);
-
-#ifdef CONFIG_FB_PXA_SMARTPANEL
-extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
-extern int pxafb_smart_flush(struct fb_info *info);
-#else
-static inline int pxafb_smart_queue(struct fb_info *info,
-				    uint16_t *cmds, int n)
-{
-	return 0;
-}
-
-static inline int pxafb_smart_flush(struct fb_info *info)
-{
-	return 0;
-}
-#endif