Merge tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc

Samsung S3C24xx and S3C64xx machine code cleanup for v5.10

Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it
also touches files shared with S5Pv210 and Exynos.  This is mostly Arnd
Bergmann work which Krzysztof Kozlowski took over, rebased and polished.

The goal is to cleanup, merge and finally make the Samsung S3C24xx and
S3C64xx architectures multiplatform.  The multiplatform did not happen
yet here - just cleaning up and merging into one arch/arm/mach-s3c
directory.  However this is step forward for multiplatform or at least
to keep this code still maintainable.

This pulls also branch with changes for Samsung SoC sound drivers from
broonie/sound because the cleanups there were part of this series and
all further patches depend on them.

* tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits)
  ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup
  ARM: s3c: Cleanup from old plat-samsung include
  ARM: s3c: make headers local if possible
  ARM: s3c: move into a common directory
  ARM: s3c24xx: stop including mach/hardware.h from mach/io.h
  cpufreq: s3c24xx: move low-level clk reg access into platform code
  cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh
  ARM: s3c: remove cpufreq header dependencies
  cpufreq: s3c24xx: split out registers
  fbdev: s3c2410fb: remove mach header dependency
  ARM: s3c24xx: bast: avoid irq_desc array usage
  ARM: s3c24xx: spi: avoid hardcoding fiq number in driver
  ARM: s3c24xx: include mach/irqs.h where needed
  ARM: s3c24xx: move s3cmci pinctrl handling into board files
  ARM: s3c24xx: move iis pinctrl config into boards
  ARM: s3c24xx: move spi fiq handler into platform
  ARM: s3c: adc: move header to linux/soc/samsung
  ARM: s3c24xx: move irqchip driver back into platform
  ARM: s3c24xx: move regs-spi.h into spi driver
  ARM: s3c64xx: remove mach/hardware.h
  ...

Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 137 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c/dev-backlight-s3c64xx.c b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
new file mode 100644
index 000000000000..65488b61e50c
--- /dev/null
+++ b/arch/arm/mach-s3c/dev-backlight-s3c64xx.c
@@ -0,0 +1,137 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2011 Samsung Electronics Co., Ltd.
+//              http://www.samsung.com
+//
+// Common infrastructure for PWM Backlight for Samsung boards
+
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/pwm_backlight.h>
+
+#include "devs.h"
+#include "gpio-cfg.h"
+
+#include "backlight-s3c64xx.h"
+
+struct samsung_bl_drvdata {
+	struct platform_pwm_backlight_data plat_data;
+	struct samsung_bl_gpio_info *gpio_info;
+};
+
+static int samsung_bl_init(struct device *dev)
+{
+	int ret = 0;
+	struct platform_pwm_backlight_data *pdata = dev->platform_data;
+	struct samsung_bl_drvdata *drvdata = container_of(pdata,
+					struct samsung_bl_drvdata, plat_data);
+	struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
+
+	ret = gpio_request(bl_gpio_info->no, "Backlight");
+	if (ret) {
+		printk(KERN_ERR "failed to request GPIO for LCD Backlight\n");
+		return ret;
+	}
+
+	/* Configure GPIO pin with specific GPIO function for PWM timer */
+	s3c_gpio_cfgpin(bl_gpio_info->no, bl_gpio_info->func);
+
+	return 0;
+}
+
+static void samsung_bl_exit(struct device *dev)
+{
+	struct platform_pwm_backlight_data *pdata = dev->platform_data;
+	struct samsung_bl_drvdata *drvdata = container_of(pdata,
+					struct samsung_bl_drvdata, plat_data);
+	struct samsung_bl_gpio_info *bl_gpio_info = drvdata->gpio_info;
+
+	s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT);
+	gpio_free(bl_gpio_info->no);
+}
+
+/* Initialize few important fields of platform_pwm_backlight_data
+ * structure with default values. These fields can be overridden by
+ * board-specific values sent from machine file.
+ * For ease of operation, these fields are initialized with values
+ * used by most samsung boards.
+ * Users has the option of sending info about other parameters
+ * for their specific boards
+ */
+
+static struct samsung_bl_drvdata samsung_dfl_bl_data __initdata = {
+	.plat_data = {
+		.max_brightness = 255,
+		.dft_brightness = 255,
+		.init           = samsung_bl_init,
+		.exit           = samsung_bl_exit,
+	},
+};
+
+static struct platform_device samsung_dfl_bl_device __initdata = {
+	.name		= "pwm-backlight",
+};
+
+/* samsung_bl_set - Set board specific data (if any) provided by user for
+ * PWM Backlight control and register specific PWM and backlight device.
+ * @gpio_info:	structure containing GPIO info for PWM timer
+ * @bl_data:	structure containing Backlight control data
+ */
+void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info,
+	struct platform_pwm_backlight_data *bl_data)
+{
+	int ret = 0;
+	struct platform_device *samsung_bl_device;
+	struct samsung_bl_drvdata *samsung_bl_drvdata;
+	struct platform_pwm_backlight_data *samsung_bl_data;
+
+	samsung_bl_device = kmemdup(&samsung_dfl_bl_device,
+			sizeof(struct platform_device), GFP_KERNEL);
+	if (!samsung_bl_device)
+		return;
+
+	samsung_bl_drvdata = kmemdup(&samsung_dfl_bl_data,
+				sizeof(samsung_dfl_bl_data), GFP_KERNEL);
+	if (!samsung_bl_drvdata)
+		goto err_data;
+
+	samsung_bl_device->dev.platform_data = &samsung_bl_drvdata->plat_data;
+	samsung_bl_drvdata->gpio_info = gpio_info;
+	samsung_bl_data = &samsung_bl_drvdata->plat_data;
+
+	/* Copy board specific data provided by user */
+	samsung_bl_device->dev.parent = &samsung_device_pwm.dev;
+
+	if (bl_data->max_brightness)
+		samsung_bl_data->max_brightness = bl_data->max_brightness;
+	if (bl_data->dft_brightness)
+		samsung_bl_data->dft_brightness = bl_data->dft_brightness;
+	if (bl_data->lth_brightness)
+		samsung_bl_data->lth_brightness = bl_data->lth_brightness;
+	if (bl_data->init)
+		samsung_bl_data->init = bl_data->init;
+	if (bl_data->notify)
+		samsung_bl_data->notify = bl_data->notify;
+	if (bl_data->notify_after)
+		samsung_bl_data->notify_after = bl_data->notify_after;
+	if (bl_data->exit)
+		samsung_bl_data->exit = bl_data->exit;
+	if (bl_data->check_fb)
+		samsung_bl_data->check_fb = bl_data->check_fb;
+
+	/* Register the Backlight dev */
+	ret = platform_device_register(samsung_bl_device);
+	if (ret) {
+		printk(KERN_ERR "failed to register backlight device: %d\n", ret);
+		goto err_plat_reg2;
+	}
+
+	return;
+
+err_plat_reg2:
+	kfree(samsung_bl_data);
+err_data:
+	kfree(samsung_bl_device);
+}