Merge tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc

Samsung S3C24xx and S3C64xx machine code cleanup for v5.10

Big cleanup for the Samsung S3C24xx and S3C64xx platforms, although it
also touches files shared with S5Pv210 and Exynos.  This is mostly Arnd
Bergmann work which Krzysztof Kozlowski took over, rebased and polished.

The goal is to cleanup, merge and finally make the Samsung S3C24xx and
S3C64xx architectures multiplatform.  The multiplatform did not happen
yet here - just cleaning up and merging into one arch/arm/mach-s3c
directory.  However this is step forward for multiplatform or at least
to keep this code still maintainable.

This pulls also branch with changes for Samsung SoC sound drivers from
broonie/sound because the cleanups there were part of this series and
all further patches depend on them.

* tag 'samsung-soc-s3c-5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (62 commits)
  ARM: s3c: Avoid naming clash of S3C24xx and S3C64xx timer setup
  ARM: s3c: Cleanup from old plat-samsung include
  ARM: s3c: make headers local if possible
  ARM: s3c: move into a common directory
  ARM: s3c24xx: stop including mach/hardware.h from mach/io.h
  cpufreq: s3c24xx: move low-level clk reg access into platform code
  cpufreq: s3c2412: use global s3c2412_cpufreq_setrefresh
  ARM: s3c: remove cpufreq header dependencies
  cpufreq: s3c24xx: split out registers
  fbdev: s3c2410fb: remove mach header dependency
  ARM: s3c24xx: bast: avoid irq_desc array usage
  ARM: s3c24xx: spi: avoid hardcoding fiq number in driver
  ARM: s3c24xx: include mach/irqs.h where needed
  ARM: s3c24xx: move s3cmci pinctrl handling into board files
  ARM: s3c24xx: move iis pinctrl config into boards
  ARM: s3c24xx: move spi fiq handler into platform
  ARM: s3c: adc: move header to linux/soc/samsung
  ARM: s3c24xx: move irqchip driver back into platform
  ARM: s3c24xx: move regs-spi.h into spi driver
  ARM: s3c64xx: remove mach/hardware.h
  ...

Link: https://lore.kernel.org/r/20200831154751.7551-1-krzk@kernel.org
Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 170 insertions, 0 deletions

diff --git a/arch/arm/mach-s3c/pm-s3c2410.c b/arch/arm/mach-s3c/pm-s3c2410.c
new file mode 100644
index 000000000000..a66419883735
--- /dev/null
+++ b/arch/arm/mach-s3c/pm-s3c2410.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright (c) 2006 Simtec Electronics
+//	Ben Dooks <ben@simtec.co.uk>
+//
+// S3C2410 (and compatible) Power Manager (Suspend-To-RAM) support
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/errno.h>
+#include <linux/time.h>
+#include <linux/device.h>
+#include <linux/syscore_ops.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>
+
+#include "regs-gpio.h"
+#include "gpio-samsung.h"
+
+#include "gpio-cfg.h"
+#include "cpu.h"
+#include "pm.h"
+
+#include "h1940.h"
+
+static void s3c2410_pm_prepare(void)
+{
+	/* ensure at least GSTATUS3 has the resume address */
+
+	__raw_writel(__pa_symbol(s3c_cpu_resume), S3C2410_GSTATUS3);
+
+	S3C_PMDBG("GSTATUS3 0x%08x\n", __raw_readl(S3C2410_GSTATUS3));
+	S3C_PMDBG("GSTATUS4 0x%08x\n", __raw_readl(S3C2410_GSTATUS4));
+
+	if (machine_is_h1940()) {
+		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+		unsigned long ptr;
+		unsigned long calc = 0;
+
+		/* generate check for the bootloader to check on resume */
+
+		for (ptr = 0; ptr < 0x40000; ptr += 0x400)
+			calc += __raw_readl(base+ptr);
+
+		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+	}
+
+	/* RX3715 and RX1950 use similar to H1940 code and the
+	 * same offsets for resume and checksum pointers */
+
+	if (machine_is_rx3715() || machine_is_rx1950()) {
+		void *base = phys_to_virt(H1940_SUSPEND_CHECK);
+		unsigned long ptr;
+		unsigned long calc = 0;
+
+		/* generate check for the bootloader to check on resume */
+
+		for (ptr = 0; ptr < 0x40000; ptr += 0x4)
+			calc += __raw_readl(base+ptr);
+
+		__raw_writel(calc, phys_to_virt(H1940_SUSPEND_CHECKSUM));
+	}
+
+	if (machine_is_aml_m5900()) {
+		gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_HIGH, NULL);
+		gpio_free(S3C2410_GPF(2));
+	}
+
+	if (machine_is_rx1950()) {
+		/* According to S3C2442 user's manual, page 7-17,
+		 * when the system is operating in NAND boot mode,
+		 * the hardware pin configuration - EINT[23:21] –
+		 * must be set as input for starting up after
+		 * wakeup from sleep mode
+		 */
+		s3c_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPIO_INPUT);
+		s3c_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPIO_INPUT);
+	}
+}
+
+static void s3c2410_pm_resume(void)
+{
+	unsigned long tmp;
+
+	/* unset the return-from-sleep flag, to ensure reset */
+
+	tmp = __raw_readl(S3C2410_GSTATUS2);
+	tmp &= S3C2410_GSTATUS2_OFFRESET;
+	__raw_writel(tmp, S3C2410_GSTATUS2);
+
+	if (machine_is_aml_m5900()) {
+		gpio_request_one(S3C2410_GPF(2), GPIOF_OUT_INIT_LOW, NULL);
+		gpio_free(S3C2410_GPF(2));
+	}
+}
+
+struct syscore_ops s3c2410_pm_syscore_ops = {
+	.resume		= s3c2410_pm_resume,
+};
+
+static int s3c2410_pm_add(struct device *dev, struct subsys_interface *sif)
+{
+	pm_cpu_prep = s3c2410_pm_prepare;
+	pm_cpu_sleep = s3c2410_cpu_suspend;
+
+	return 0;
+}
+
+#if defined(CONFIG_CPU_S3C2410)
+static struct subsys_interface s3c2410_pm_interface = {
+	.name		= "s3c2410_pm",
+	.subsys		= &s3c2410_subsys,
+	.add_dev	= s3c2410_pm_add,
+};
+
+/* register ourselves */
+
+static int __init s3c2410_pm_drvinit(void)
+{
+	return subsys_interface_register(&s3c2410_pm_interface);
+}
+
+arch_initcall(s3c2410_pm_drvinit);
+
+static struct subsys_interface s3c2410a_pm_interface = {
+	.name		= "s3c2410a_pm",
+	.subsys		= &s3c2410a_subsys,
+	.add_dev	= s3c2410_pm_add,
+};
+
+static int __init s3c2410a_pm_drvinit(void)
+{
+	return subsys_interface_register(&s3c2410a_pm_interface);
+}
+
+arch_initcall(s3c2410a_pm_drvinit);
+#endif
+
+#if defined(CONFIG_CPU_S3C2440)
+static struct subsys_interface s3c2440_pm_interface = {
+	.name		= "s3c2440_pm",
+	.subsys		= &s3c2440_subsys,
+	.add_dev	= s3c2410_pm_add,
+};
+
+static int __init s3c2440_pm_drvinit(void)
+{
+	return subsys_interface_register(&s3c2440_pm_interface);
+}
+
+arch_initcall(s3c2440_pm_drvinit);
+#endif
+
+#if defined(CONFIG_CPU_S3C2442)
+static struct subsys_interface s3c2442_pm_interface = {
+	.name		= "s3c2442_pm",
+	.subsys		= &s3c2442_subsys,
+	.add_dev	= s3c2410_pm_add,
+};
+
+static int __init s3c2442_pm_drvinit(void)
+{
+	return subsys_interface_register(&s3c2442_pm_interface);
+}
+
+arch_initcall(s3c2442_pm_drvinit);
+#endif