[ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu components

The following patch and script moves the arch/arm/mach-s3c2410
directory into arch/arm/plat-s3c24xx for the generic core code
and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files

Include directory include/asm-arm/plat-s3c24xx is added for the
core include files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 30 insertions, 121 deletions

diff --git a/arch/arm/mach-s3c2410/sleep.S b/arch/arm/mach-s3c2410/sleep.S
index 2018c2e1dcc5..9179a1024588 100644
--- a/arch/arm/mach-s3c2410/sleep.S
+++ b/arch/arm/mach-s3c2410/sleep.S
@@ -1,4 +1,4 @@
-/* linux/arch/arm/mach-s3c2410/sleep.S
+/* linux/arch/arm/mach-s3c2410/s3c2410-sleep.S
  *
  * Copyright (c) 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
@@ -34,126 +34,35 @@
 #include <asm/arch/regs-mem.h>
 #include <asm/arch/regs-serial.h>
 
-/* CONFIG_DEBUG_RESUME is dangerous if your bootloader does not
- * reset the UART configuration, only enable if you really need this!
-*/
-//#define CONFIG_DEBUG_RESUME
-
-	.text
-
-	/* s3c2410_cpu_save
-	 *
-	 * save enough of the CPU state to allow us to re-start
-	 * pm.c code. as we store items like the sp/lr, we will
-	 * end up returning from this function when the cpu resumes
-	 * so the return value is set to mark this.
-	 *
-	 * This arangement means we avoid having to flush the cache
-	 * from this code.
-	 *
-	 * entry:
-	 *	r0 = pointer to save block
-	 *
-	 * exit:
-	 *	r0 = 0 => we stored everything
-	 *	     1 => resumed from sleep
-	*/
-
-ENTRY(s3c2410_cpu_save)
-	stmfd	sp!, { r4 - r12, lr }
-
-	@@ store co-processor registers
-
-	mrc	p15, 0, r4, c15, c1, 0	@ CP access register
-	mrc	p15, 0, r5, c13, c0, 0	@ PID
-	mrc	p15, 0, r6, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r7, c2, c0, 0	@ translation table base address
-	mrc	p15, 0, r8, c1, c0, 0	@ control register
-
-	stmia	r0, { r4 - r13 }
-
-	mov	r0, #0
-	ldmfd	sp, { r4 - r12, pc }
-
-	@@ return to the caller, after having the MMU
-	@@ turned on, this restores the last bits from the
-	@@ stack
-resume_with_mmu:
-	mov	r0, #1
-	ldmfd	sp!, { r4 - r12, pc }
-
-	.ltorg
-
-	@@ the next bits sit in the .data segment, even though they
-	@@ happen to be code... the s3c2410_sleep_save_phys needs to be
-	@@ accessed by the resume code before it can restore the MMU.
-	@@ This means that the variable has to be close enough for the
-	@@ code to read it... since the .text segment needs to be RO,
-	@@ the data segment can be the only place to put this code.
-
-	.data
-
-	.global	s3c2410_sleep_save_phys
-s3c2410_sleep_save_phys:
-	.word	0
-
-	/* s3c2410_cpu_resume
+	/* s3c2410_cpu_suspend
 	 *
-	 * resume code entry for bootloader to call
-	 *
-	 * we must put this code here in the data segment as we have no
-	 * other way of restoring the stack pointer after sleep, and we
-	 * must not write to the code segment (code is read-only)
+	 * put the cpu into sleep mode
 	*/
 
-ENTRY(s3c2410_cpu_resume)
-	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
-	msr	cpsr_c, r0
-
-	@@ load UART to allow us to print the two characters for
-	@@ resume debug
-
-	mov	r2, #S3C24XX_PA_UART & 0xff000000
-	orr	r2, r2, #S3C24XX_PA_UART & 0xff000
-
-#if 0
-	/* SMDK2440 LED set */
-	mov	r14, #S3C24XX_PA_GPIO
-	ldr	r12, [ r14, #0x54 ]
-	bic	r12, r12, #3<<4
-	orr	r12, r12, #1<<7
-	str	r12, [ r14, #0x54 ]
-#endif
-
-#ifdef CONFIG_DEBUG_RESUME
-	mov	r3, #'L'
-	strb	r3, [ r2, #S3C2410_UTXH ]
-1001:
-	ldrb	r14, [ r3, #S3C2410_UTRSTAT ]
-	tst	r14, #S3C2410_UTRSTAT_TXE
-	beq	1001b
-#endif /* CONFIG_DEBUG_RESUME */
-
-	mov	r1, #0
-	mcr	p15, 0, r1, c8, c7, 0		@@ invalidate I & D TLBs
-	mcr	p15, 0, r1, c7, c7, 0		@@ invalidate I & D caches
-
-	ldr	r0, s3c2410_sleep_save_phys	@ address of restore block
-	ldmia	r0, { r4 - r13 }
-
-	mcr	p15, 0, r4, c15, c1, 0		@ CP access register
-	mcr	p15, 0, r5, c13, c0, 0		@ PID
-	mcr	p15, 0, r6, c3, c0, 0		@ Domain ID
-	mcr	p15, 0, r7, c2, c0, 0		@ translation table base
-
-#ifdef CONFIG_DEBUG_RESUME
-	mov	r3, #'R'
-	strb	r3, [ r2, #S3C2410_UTXH ]
-#endif
-
-	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r8, c1, c0, 0		@ turn on MMU, etc
-	nop					@ second-to-last before mmu
-	mov	pc, r2				@ go back to virtual address
-
-	.ltorg
+ENTRY(s3c2410_cpu_suspend)
+	@@ prepare cpu to sleep
+
+	ldr	r4, =S3C2410_REFRESH
+	ldr	r5, =S3C24XX_MISCCR
+	ldr	r6, =S3C2410_CLKCON
+	ldr	r7, [ r4 ]		@ get REFRESH (and ensure in TLB)
+	ldr	r8, [ r5 ]		@ get MISCCR (and ensure in TLB)
+	ldr	r9, [ r6 ]		@ get CLKCON (and ensure in TLB)
+
+	orr	r7, r7, #S3C2410_REFRESH_SELF	@ SDRAM sleep command
+	orr	r8, r8, #S3C2410_MISCCR_SDSLEEP @ SDRAM power-down signals
+	orr	r9, r9, #S3C2410_CLKCON_POWER	@ power down command
+
+	teq	pc, #0			@ first as a trial-run to load cache
+	bl	s3c2410_do_sleep
+	teq	r0, r0			@ now do it for real
+	b	s3c2410_do_sleep	@
+
+	@@ align next bit of code to cache line
+	.align	8
+s3c2410_do_sleep:
+	streq	r7, [ r4 ]			@ SDRAM sleep command
+	streq	r8, [ r5 ]			@ SDRAM power-down config
+	streq	r9, [ r6 ]			@ CPU sleep
+1:	beq	1b
+	mov	pc, r14