Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable

Conflicts:
	arch/arm/mach-s3c64xx/dev-audio.c

1 files changed, 202 insertions, 0 deletions

diff --git a/arch/arm/mach-s5pv310/mach-smdkc210.c b/arch/arm/mach-s5pv310/mach-smdkc210.c
new file mode 100644
index 000000000000..2b8d4fc52d7c
--- /dev/null
+++ b/arch/arm/mach-s5pv310/mach-smdkc210.c
@@ -0,0 +1,202 @@
+/* linux/arch/arm/mach-s5pv310/mach-smdkc210.c
+ *
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/serial_core.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/io.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <plat/regs-serial.h>
+#include <plat/s5pv310.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/sdhci.h>
+
+#include <mach/map.h>
+#include <mach/regs-srom.h>
+
+/* Following are default values for UCON, ULCON and UFCON UART registers */
+#define SMDKC210_UCON_DEFAULT	(S3C2410_UCON_TXILEVEL |	\
+				 S3C2410_UCON_RXILEVEL |	\
+				 S3C2410_UCON_TXIRQMODE |	\
+				 S3C2410_UCON_RXIRQMODE |	\
+				 S3C2410_UCON_RXFIFO_TOI |	\
+				 S3C2443_UCON_RXERR_IRQEN)
+
+#define SMDKC210_ULCON_DEFAULT	S3C2410_LCON_CS8
+
+#define SMDKC210_UFCON_DEFAULT	(S3C2410_UFCON_FIFOMODE |	\
+				 S5PV210_UFCON_TXTRIG4 |	\
+				 S5PV210_UFCON_RXTRIG4)
+
+static struct s3c2410_uartcfg smdkc210_uartcfgs[] __initdata = {
+	[0] = {
+		.hwport		= 0,
+		.flags		= 0,
+		.ucon		= SMDKC210_UCON_DEFAULT,
+		.ulcon		= SMDKC210_ULCON_DEFAULT,
+		.ufcon		= SMDKC210_UFCON_DEFAULT,
+	},
+	[1] = {
+		.hwport		= 1,
+		.flags		= 0,
+		.ucon		= SMDKC210_UCON_DEFAULT,
+		.ulcon		= SMDKC210_ULCON_DEFAULT,
+		.ufcon		= SMDKC210_UFCON_DEFAULT,
+	},
+	[2] = {
+		.hwport		= 2,
+		.flags		= 0,
+		.ucon		= SMDKC210_UCON_DEFAULT,
+		.ulcon		= SMDKC210_ULCON_DEFAULT,
+		.ufcon		= SMDKC210_UFCON_DEFAULT,
+	},
+	[3] = {
+		.hwport		= 3,
+		.flags		= 0,
+		.ucon		= SMDKC210_UCON_DEFAULT,
+		.ulcon		= SMDKC210_ULCON_DEFAULT,
+		.ufcon		= SMDKC210_UFCON_DEFAULT,
+	},
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc0_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S5PV310_GPK0(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH0_8BIT
+	.max_width		= 8,
+	.host_caps		= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc1_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S5PV310_GPK0(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc2_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S5PV310_GPK2(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+#ifdef CONFIG_S5PV310_SDHCI_CH2_8BIT
+	.max_width		= 8,
+	.host_caps		= MMC_CAP_8_BIT_DATA,
+#endif
+};
+
+static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = {
+	.cd_type		= S3C_SDHCI_CD_GPIO,
+	.ext_cd_gpio		= S5PV310_GPK2(2),
+	.ext_cd_gpio_invert	= 1,
+	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
+};
+
+static struct resource smdkc210_smsc911x_resources[] = {
+	[0] = {
+		.start	= S5PV310_PA_SROM_BANK(1),
+		.end	= S5PV310_PA_SROM_BANK(1) + SZ_64K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_EINT(5),
+		.end	= IRQ_EINT(5),
+		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_LOW,
+	},
+};
+
+static struct smsc911x_platform_config smsc9215_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.mac		= {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
+};
+
+static struct platform_device smdkc210_smsc911x = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(smdkc210_smsc911x_resources),
+	.resource	= smdkc210_smsc911x_resources,
+	.dev		= {
+		.platform_data	= &smsc9215_config,
+	},
+};
+
+static struct platform_device *smdkc210_devices[] __initdata = {
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&s3c_device_hsmmc3,
+	&s3c_device_rtc,
+	&s3c_device_wdt,
+	&smdkc210_smsc911x,
+};
+
+static void __init smdkc210_smsc911x_init(void)
+{
+	u32 cs1;
+
+	/* configure nCS1 width to 16 bits */
+	cs1 = __raw_readl(S5PV310_SROM_BW) &
+		    ~(S5PV310_SROM_BW__CS_MASK <<
+				    S5PV310_SROM_BW__NCS1__SHIFT);
+	cs1 |= ((1 << S5PV310_SROM_BW__DATAWIDTH__SHIFT) |
+		(1 << S5PV310_SROM_BW__WAITENABLE__SHIFT) |
+		(1 << S5PV310_SROM_BW__BYTEENABLE__SHIFT)) <<
+		S5PV310_SROM_BW__NCS1__SHIFT;
+	__raw_writel(cs1, S5PV310_SROM_BW);
+
+	/* set timing for nCS1 suitable for ethernet chip */
+	__raw_writel((0x1 << S5PV310_SROM_BCX__PMC__SHIFT) |
+		     (0x9 << S5PV310_SROM_BCX__TACP__SHIFT) |
+		     (0xc << S5PV310_SROM_BCX__TCAH__SHIFT) |
+		     (0x1 << S5PV310_SROM_BCX__TCOH__SHIFT) |
+		     (0x6 << S5PV310_SROM_BCX__TACC__SHIFT) |
+		     (0x1 << S5PV310_SROM_BCX__TCOS__SHIFT) |
+		     (0x1 << S5PV310_SROM_BCX__TACS__SHIFT), S5PV310_SROM_BC1);
+}
+
+static void __init smdkc210_map_io(void)
+{
+	s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+	s3c24xx_init_clocks(24000000);
+	s3c24xx_init_uarts(smdkc210_uartcfgs, ARRAY_SIZE(smdkc210_uartcfgs));
+}
+
+static void __init smdkc210_machine_init(void)
+{
+	smdkc210_smsc911x_init();
+
+	s3c_sdhci0_set_platdata(&smdkc210_hsmmc0_pdata);
+	s3c_sdhci1_set_platdata(&smdkc210_hsmmc1_pdata);
+	s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata);
+	s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata);
+
+	platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices));
+}
+
+MACHINE_START(SMDKC210, "SMDKC210")
+	/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
+	.boot_params	= S5P_PA_SDRAM + 0x100,
+	.init_irq	= s5pv310_init_irq,
+	.map_io		= smdkc210_map_io,
+	.init_machine	= smdkc210_machine_init,
+	.timer		= &s5pv310_timer,
+MACHINE_END