ARM: shmobile: sh73a0: Support sparse GPIO numbers

The SH73A0 SoC has sparse GPIO numbers. Declare the pin numbers ranges
in the PFC SoC data and use the pin numbers in the GPIO API.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 13 insertions, 13 deletions

diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index 8ff53a19c48c..a4ac46a89b27 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -304,9 +304,9 @@ static int lcd_backlight_set_brightness(int brightness)
 
 	if (brightness == 0) {
 		/* Reset the chip */
-		gpio_set_value(GPIO_PORT235, 0);
+		gpio_set_value(235, 0);
 		mdelay(24);
-		gpio_set_value(GPIO_PORT235, 1);
+		gpio_set_value(235, 1);
 		return 0;
 	}
 
@@ -406,7 +406,7 @@ static struct sh_mobile_sdhi_info sdhi0_info = {
 	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
 	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
 	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
-	.cd_gpio	= GPIO_PORT251,
+	.cd_gpio	= 251,
 };
 
 static struct resource sdhi0_resources[] = {
@@ -461,7 +461,7 @@ static struct regulator_init_data cn4_power_init_data = {
 static struct fixed_voltage_config cn4_power_info = {
 	.supply_name = "CN4 SD/MMC Vdd",
 	.microvolts = 3300000,
-	.gpio = GPIO_PORT114,
+	.gpio = 114,
 	.enable_high = 1,
 	.init_data = &cn4_power_init_data,
 };
@@ -479,10 +479,10 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
 	static int power_gpio = -EINVAL;
 
 	if (power_gpio < 0) {
-		int ret = gpio_request_one(GPIO_PORT114, GPIOF_OUT_INIT_LOW,
+		int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW,
 					   "sdhi1_power");
 		if (!ret)
-			power_gpio = GPIO_PORT114;
+			power_gpio = 114;
 	}
 
 	/*
@@ -493,7 +493,7 @@ static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
 	 * regulator driver. We have to live with the race in case the driver
 	 * gets unloaded and the GPIO freed between these two steps.
 	 */
-	gpio_set_value(GPIO_PORT114, state);
+	gpio_set_value(114, state);
 }
 
 static struct sh_mobile_sdhi_info sh_sdhi1_info = {
@@ -603,11 +603,11 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_MMCD0_5_PU, NULL);
 	gpio_request(GPIO_FN_MMCD0_6_PU, NULL);
 	gpio_request(GPIO_FN_MMCD0_7_PU, NULL);
-	gpio_request_one(GPIO_PORT208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
+	gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
 
 	/* enable SMSC911X */
-	gpio_request_one(GPIO_PORT144, GPIOF_IN, NULL); /* PINTA2 */
-	gpio_request_one(GPIO_PORT145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
+	gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
+	gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
 
 	/* FSI A */
 	gpio_request(GPIO_FN_FSIACK, NULL);
@@ -622,13 +622,13 @@ static void __init ag5evm_init(void)
 	gpio_request(GPIO_FN_PORT243_IRDA_FIRSEL, NULL);
 
 	/* LCD panel */
-	gpio_request_one(GPIO_PORT217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
+	gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
 	mdelay(1);
-	gpio_set_value(GPIO_PORT217, 1);
+	gpio_set_value(217, 1);
 	mdelay(100);
 
 	/* LCD backlight controller */
-	gpio_request_one(GPIO_PORT235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
+	gpio_request_one(235, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
 	lcd_backlight_set_brightness(0);
 
 	/* enable SDHI0 on CN15 [SD I/F] */