ARCH: ARM: shmobile: Remove ag5evm board support

Remove support for the sh73a0 based ag5evm board.

The sh73a0 SoC is continued to be supported using
the kzm9g board.

Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

4 files changed, 0 insertions, 648 deletions

diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index c536cca9fdcb..e4ad4089f6ff 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -71,13 +71,6 @@ config ARCH_EMEV2
 
 comment "SH-Mobile Board Type"
 
-config MACH_AG5EVM
-	bool "AG5EVM board"
-	depends on ARCH_SH73A0
-	select ARCH_REQUIRE_GPIOLIB
-	select REGULATOR_FIXED_VOLTAGE if REGULATOR
-	select SH_LCD_MIPI_DSI
-
 config MACH_APE6EVM
 	bool "APE6EVM board"
 	depends on ARCH_R8A73A4
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index 857a09d3ea11..62574c145813 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -35,7 +35,6 @@ obj-$(CONFIG_ARCH_R8A7779)	+= pm-r8a7779.o
 obj-$(CONFIG_ARCH_SH73A0)	+= pm-sh73a0.o
 
 # Board objects
-obj-$(CONFIG_MACH_AG5EVM)	+= board-ag5evm.o
 obj-$(CONFIG_MACH_APE6EVM)	+= board-ape6evm.o
 obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_BOCKW)	+= board-bockw.o
diff --git a/arch/arm/mach-shmobile/Makefile.boot b/arch/arm/mach-shmobile/Makefile.boot
index 9156c56aee80..b8c1a21fcaf3 100644
--- a/arch/arm/mach-shmobile/Makefile.boot
+++ b/arch/arm/mach-shmobile/Makefile.boot
@@ -1,6 +1,5 @@
 # per-board load address for uImage
 loadaddr-y	:=
-loadaddr-$(CONFIG_MACH_AG5EVM) += 0x40008000
 loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
 loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
deleted file mode 100644
index f6d64495c405..000000000000
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ /dev/null
@@ -1,639 +0,0 @@
-/*
- * arch/arm/mach-shmobile/board-ag5evm.c
- *
- * Copyright (C) 2010  Takashi Yoshii <yoshii.takashi.zj@renesas.com>
- * Copyright (C) 2009  Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/serial_sci.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio.h>
-#include <linux/videodev2.h>
-#include <linux/input.h>
-#include <linux/input/sh_keysc.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mfd/tmio.h>
-#include <linux/platform_data/bd6107.h>
-#include <linux/sh_clk.h>
-#include <linux/irqchip/arm-gic.h>
-#include <video/sh_mobile_lcdc.h>
-#include <video/sh_mipi_dsi.h>
-#include <sound/sh_fsi.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-#include <mach/sh73a0.h>
-#include <mach/common.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/traps.h>
-
-/* Dummy supplies, where voltage doesn't matter */
-static struct regulator_consumer_supply dummy_supplies[] = {
-	REGULATOR_SUPPLY("vddvario", "smsc911x"),
-	REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource smsc9220_resources[] = {
-	[0] = {
-		.start		= 0x14000000,
-		.end		= 0x14000000 + SZ_64K - 1,
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start		= SH73A0_PINT0_IRQ(2), /* PINTA2 */
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
-static struct smsc911x_platform_config smsc9220_platdata = {
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
-};
-
-static struct platform_device eth_device = {
-	.name		= "smsc911x",
-	.id		= 0,
-	.dev  = {
-		.platform_data = &smsc9220_platdata,
-	},
-	.resource	= smsc9220_resources,
-	.num_resources	= ARRAY_SIZE(smsc9220_resources),
-};
-
-static struct sh_keysc_info keysc_platdata = {
-	.mode		= SH_KEYSC_MODE_6,
-	.scan_timing	= 3,
-	.delay		= 100,
-	.keycodes	= {
-		KEY_A, KEY_B, KEY_C, KEY_D, KEY_E, KEY_F, KEY_G,
-		KEY_H, KEY_I, KEY_J, KEY_K, KEY_L, KEY_M, KEY_N,
-		KEY_O, KEY_P, KEY_Q, KEY_R, KEY_S, KEY_T, KEY_U,
-		KEY_V, KEY_W, KEY_X, KEY_Y, KEY_Z, KEY_HOME, KEY_SLEEP,
-		KEY_SPACE, KEY_9, KEY_6, KEY_3, KEY_WAKEUP, KEY_RIGHT, \
-		KEY_COFFEE,
-		KEY_0, KEY_8, KEY_5, KEY_2, KEY_DOWN, KEY_ENTER, KEY_UP,
-		KEY_KPASTERISK, KEY_7, KEY_4, KEY_1, KEY_STOP, KEY_LEFT, \
-		KEY_COMPUTER,
-	},
-};
-
-static struct resource keysc_resources[] = {
-	[0] = {
-		.name	= "KEYSC",
-		.start	= 0xe61b0000,
-		.end	= 0xe61b0098 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(71),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device keysc_device = {
-	.name		= "sh_keysc",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(keysc_resources),
-	.resource	= keysc_resources,
-	.dev		= {
-		.platform_data	= &keysc_platdata,
-	},
-};
-
-/* FSI A */
-static struct resource fsi_resources[] = {
-	[0] = {
-		.name	= "FSI",
-		.start	= 0xEC230000,
-		.end	= 0xEC230400 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = gic_spi(146),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device fsi_device = {
-	.name		= "sh_fsi2",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(fsi_resources),
-	.resource	= fsi_resources,
-};
-
-/* Fixed 1.8V regulator to be used by MMCIF */
-static struct regulator_consumer_supply fixed1v8_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mmcif.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mmcif.0"),
-};
-
-static struct resource sh_mmcif_resources[] = {
-	[0] = {
-		.name	= "MMCIF",
-		.start	= 0xe6bd0000,
-		.end	= 0xe6bd00ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(141),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start	= gic_spi(140),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct sh_mmcif_plat_data sh_mmcif_platdata = {
-	.sup_pclk	= 0,
-	.ocr		= MMC_VDD_165_195,
-	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
-	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
-};
-
-static struct platform_device mmc_device = {
-	.name		= "sh_mmcif",
-	.id		= 0,
-	.dev		= {
-		.dma_mask		= NULL,
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &sh_mmcif_platdata,
-	},
-	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
-	.resource	= sh_mmcif_resources,
-};
-
-/* IrDA */
-static struct resource irda_resources[] = {
-	[0] = {
-		.start	= 0xE6D00000,
-		.end	= 0xE6D01FD4 - 1,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= gic_spi(95),
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device irda_device = {
-	.name           = "sh_irda",
-	.id		= 0,
-	.resource       = irda_resources,
-	.num_resources  = ARRAY_SIZE(irda_resources),
-};
-
-/* MIPI-DSI */
-static struct resource mipidsi0_resources[] = {
-	[0] = {
-		.name	= "DSI0",
-		.start  = 0xfeab0000,
-		.end    = 0xfeab3fff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= "DSI0",
-		.start  = 0xfeab4000,
-		.end    = 0xfeab7fff,
-		.flags  = IORESOURCE_MEM,
-	},
-};
-
-static int sh_mipi_set_dot_clock(struct platform_device *pdev,
-				 void __iomem *base,
-				 int enable)
-{
-	struct clk *pck, *phy;
-	int ret;
-
-	pck = clk_get(&pdev->dev, "dsip_clk");
-	if (IS_ERR(pck)) {
-		ret = PTR_ERR(pck);
-		goto sh_mipi_set_dot_clock_pck_err;
-	}
-
-	phy = clk_get(&pdev->dev, "dsiphy_clk");
-	if (IS_ERR(phy)) {
-		ret = PTR_ERR(phy);
-		goto sh_mipi_set_dot_clock_phy_err;
-	}
-
-	if (enable) {
-		clk_set_rate(pck, clk_round_rate(pck,  24000000));
-		clk_set_rate(phy, clk_round_rate(pck, 510000000));
-		clk_enable(pck);
-		clk_enable(phy);
-	} else {
-		clk_disable(pck);
-		clk_disable(phy);
-	}
-
-	ret = 0;
-
-	clk_put(phy);
-sh_mipi_set_dot_clock_phy_err:
-	clk_put(pck);
-sh_mipi_set_dot_clock_pck_err:
-	return ret;
-}
-
-static struct sh_mipi_dsi_info mipidsi0_info = {
-	.data_format	= MIPI_RGB888,
-	.channel	= LCDC_CHAN_MAINLCD,
-	.lane		= 2,
-	.vsynw_offset	= 20,
-	.clksrc		= 1,
-	.flags		= SH_MIPI_DSI_HSABM		|
-			  SH_MIPI_DSI_SYNC_PULSES_MODE	|
-			  SH_MIPI_DSI_HSbyteCLK,
-	.set_dot_clock	= sh_mipi_set_dot_clock,
-};
-
-static struct platform_device mipidsi0_device = {
-	.name           = "sh-mipi-dsi",
-	.num_resources  = ARRAY_SIZE(mipidsi0_resources),
-	.resource       = mipidsi0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &mipidsi0_info,
-	},
-};
-
-/* LCDC0 and backlight */
-static const struct fb_videomode lcdc0_modes[] = {
-	{
-		.name		= "R63302(QHD)",
-		.xres		= 544,
-		.yres		= 961,
-		.left_margin	= 72,
-		.right_margin	= 600,
-		.hsync_len	= 16,
-		.upper_margin	= 8,
-		.lower_margin	= 8,
-		.vsync_len	= 2,
-		.sync		= FB_SYNC_VERT_HIGH_ACT | FB_SYNC_HOR_HIGH_ACT,
-	},
-};
-
-static struct sh_mobile_lcdc_info lcdc0_info = {
-	.clock_source = LCDC_CLK_PERIPHERAL,
-	.ch[0] = {
-		.chan = LCDC_CHAN_MAINLCD,
-		.interface_type = RGB24,
-		.clock_divider = 1,
-		.flags = LCDC_FLAGS_DWPOL,
-		.fourcc = V4L2_PIX_FMT_RGB565,
-		.lcd_modes = lcdc0_modes,
-		.num_modes = ARRAY_SIZE(lcdc0_modes),
-		.panel_cfg = {
-			.width = 44,
-			.height = 79,
-		},
-		.tx_dev = &mipidsi0_device,
-	}
-};
-
-static struct resource lcdc0_resources[] = {
-	[0] = {
-		.name	= "LCDC0",
-		.start	= 0xfe940000, /* P4-only space */
-		.end	= 0xfe943fff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= intcs_evt2irq(0x580),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device lcdc0_device = {
-	.name		= "sh_mobile_lcdc_fb",
-	.num_resources	= ARRAY_SIZE(lcdc0_resources),
-	.resource	= lcdc0_resources,
-	.id             = 0,
-	.dev	= {
-		.platform_data	= &lcdc0_info,
-		.coherent_dma_mask = ~0,
-	},
-};
-
-static struct bd6107_platform_data backlight_data = {
-	.fbdev = &lcdc0_device.dev,
-	.reset = 235,
-	.def_value = 0,
-};
-
-static struct i2c_board_info backlight_board_info = {
-	I2C_BOARD_INFO("bd6107", 0x6d),
-	.platform_data = &backlight_data,
-};
-
-/* Fixed 2.8V regulators to be used by SDHI0 */
-static struct regulator_consumer_supply fixed2v8_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.0"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.0"),
-};
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info = {
-	.dma_slave_tx	= SHDMA_SLAVE_SDHI0_TX,
-	.dma_slave_rx	= SHDMA_SLAVE_SDHI0_RX,
-	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT | TMIO_MMC_USE_GPIO_CD,
-	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
-	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
-	.cd_gpio	= 251,
-};
-
-static struct resource sdhi0_resources[] = {
-	[0] = {
-		.name	= "SDHI0",
-		.start	= 0xee100000,
-		.end	= 0xee1000ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(83),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(84),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(85),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi0_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(sdhi0_resources),
-	.resource	= sdhi0_resources,
-	.dev	= {
-		.platform_data	= &sdhi0_info,
-	},
-};
-
-/* Fixed 3.3V regulator to be used by SDHI1 */
-static struct regulator_consumer_supply cn4_power_consumers[] =
-{
-	REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi.1"),
-	REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi.1"),
-};
-
-static struct regulator_init_data cn4_power_init_data = {
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = ARRAY_SIZE(cn4_power_consumers),
-	.consumer_supplies      = cn4_power_consumers,
-};
-
-static struct fixed_voltage_config cn4_power_info = {
-	.supply_name = "CN4 SD/MMC Vdd",
-	.microvolts = 3300000,
-	.gpio = 114,
-	.enable_high = 1,
-	.init_data = &cn4_power_init_data,
-};
-
-static struct platform_device cn4_power = {
-	.name = "reg-fixed-voltage",
-	.id   = 2,
-	.dev  = {
-		.platform_data = &cn4_power_info,
-	},
-};
-
-static void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
-{
-	static int power_gpio = -EINVAL;
-
-	if (power_gpio < 0) {
-		int ret = gpio_request_one(114, GPIOF_OUT_INIT_LOW,
-					   "sdhi1_power");
-		if (!ret)
-			power_gpio = 114;
-	}
-
-	/*
-	 * If requesting the GPIO above failed, it means, that the regulator got
-	 * probed and grabbed the GPIO, but we don't know, whether the sdhi
-	 * driver already uses the regulator. If it doesn't, we have to toggle
-	 * the GPIO ourselves, even though it is now owned by the fixed
-	 * regulator driver. We have to live with the race in case the driver
-	 * gets unloaded and the GPIO freed between these two steps.
-	 */
-	gpio_set_value(114, state);
-}
-
-static struct sh_mobile_sdhi_info sh_sdhi1_info = {
-	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT,
-	.tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
-	.tmio_ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.set_pwr	= ag5evm_sdhi1_set_pwr,
-};
-
-static struct resource sdhi1_resources[] = {
-	[0] = {
-		.name	= "SDHI1",
-		.start	= 0xee120000,
-		.end	= 0xee1200ff,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
-		.start	= gic_spi(87),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
-		.start	= gic_spi(88),
-		.flags	= IORESOURCE_IRQ,
-	},
-	[3] = {
-		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
-		.start	= gic_spi(89),
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device sdhi1_device = {
-	.name		= "sh_mobile_sdhi",
-	.id		= 1,
-	.dev		= {
-		.platform_data	= &sh_sdhi1_info,
-	},
-	.num_resources	= ARRAY_SIZE(sdhi1_resources),
-	.resource	= sdhi1_resources,
-};
-
-static struct platform_device *ag5evm_devices[] __initdata = {
-	&cn4_power,
-	&eth_device,
-	&keysc_device,
-	&fsi_device,
-	&mmc_device,
-	&irda_device,
-	&mipidsi0_device,
-	&lcdc0_device,
-	&sdhi0_device,
-	&sdhi1_device,
-};
-
-static unsigned long pin_pullup_conf[] = {
-	PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_UP, 0),
-};
-
-static const struct pinctrl_map ag5evm_pinctrl_map[] = {
-	/* FSIA */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
-				  "fsia_mclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
-				  "fsia_sclk_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
-				  "fsia_data_in", "fsia"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_fsi2.0", "pfc-sh73a0",
-				  "fsia_data_out", "fsia"),
-	/* I2C2 & I2C3 */
-	PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.2", "pfc-sh73a0",
-				  "i2c2_0", "i2c2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("i2c-sh_mobile.3", "pfc-sh73a0",
-				  "i2c3_0", "i2c3"),
-	/* IrDA */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_irda.0", "pfc-sh73a0",
-				  "irda_0", "irda"),
-	/* KEYSC */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_in8", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out04", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out5", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out6_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out7_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out8_0", "keysc"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				  "keysc_out9_2", "keysc"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_keysc.0", "pfc-sh73a0",
-				      "keysc_in8", pin_pullup_conf),
-	/* MMCIF */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_data8_0", "mmc0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				  "mmc0_ctrl_0", "mmc0"),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				    "PORT279", pin_pullup_conf),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mmcif.0", "pfc-sh73a0",
-				      "mmc0_data8_0", pin_pullup_conf),
-	/* SCIFA2 */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
-				  "scifa2_data_0", "scifa2"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.2", "pfc-sh73a0",
-				  "scifa2_ctrl_0", "scifa2"),
-	/* SDHI0 (CN15 [SD I/F]) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_data4", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_ctrl", "sdhi0"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-sh73a0",
-				  "sdhi0_wp", "sdhi0"),
-	/* SDHI1 (CN4 [WLAN I/F]) */
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				  "sdhi1_data4", "sdhi1"),
-	PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				  "sdhi1_ctrl", "sdhi1"),
-	PIN_MAP_CONFIGS_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				      "sdhi1_data4", pin_pullup_conf),
-	PIN_MAP_CONFIGS_PIN_DEFAULT("sh_mobile_sdhi.1", "pfc-sh73a0",
-				    "PORT263", pin_pullup_conf),
-};
-
-static void __init ag5evm_init(void)
-{
-	regulator_register_always_on(0, "fixed-1.8V", fixed1v8_power_consumers,
-				     ARRAY_SIZE(fixed1v8_power_consumers), 1800000);
-	regulator_register_always_on(1, "fixed-2.8V", fixed2v8_power_consumers,
-				     ARRAY_SIZE(fixed2v8_power_consumers), 3300000);
-	regulator_register_fixed(3, dummy_supplies, ARRAY_SIZE(dummy_supplies));
-
-	pinctrl_register_mappings(ag5evm_pinctrl_map,
-				  ARRAY_SIZE(ag5evm_pinctrl_map));
-	sh73a0_pinmux_init();
-
-	/* enable MMCIF */
-	gpio_request_one(208, GPIOF_OUT_INIT_HIGH, NULL); /* Reset */
-
-	/* enable SMSC911X */
-	gpio_request_one(144, GPIOF_IN, NULL); /* PINTA2 */
-	gpio_request_one(145, GPIOF_OUT_INIT_HIGH, NULL); /* RESET */
-
-	/* LCD panel */
-	gpio_request_one(217, GPIOF_OUT_INIT_LOW, NULL); /* RESET */
-	mdelay(1);
-	gpio_set_value(217, 1);
-	mdelay(100);
-
-
-#ifdef CONFIG_CACHE_L2X0
-	/* Shared attribute override enable, 64K*8way */
-	l2x0_init(IOMEM(0xf0100000), 0x00460000, 0xc2000fff);
-#endif
-	sh73a0_add_standard_devices();
-
-	i2c_register_board_info(1, &backlight_board_info, 1);
-
-	platform_add_devices(ag5evm_devices, ARRAY_SIZE(ag5evm_devices));
-}
-
-MACHINE_START(AG5EVM, "ag5evm")
-	.smp		= smp_ops(sh73a0_smp_ops),
-	.map_io		= sh73a0_map_io,
-	.init_early	= sh73a0_add_early_devices,
-	.nr_irqs	= NR_IRQS_LEGACY,
-	.init_irq	= sh73a0_init_irq,
-	.init_machine	= ag5evm_init,
-	.init_late	= shmobile_init_late,
-	.init_time	= sh73a0_earlytimer_init,
-MACHINE_END