ARM: tegra: uncompress.h: Implement TEGRA_DEBUG_UART_AUTO_ODMDATA

Tegra has 5 UARTS which could be used for low-level debug output. Commit
fe26398 "ARM: tegra: uncompress.h: Choose a UART at runtime" implemented
one method for the kernel to automatically determine which of these to
use at run-time, so that the same DEBUG_LL-enabled kernel image could be
used across multiple Tegra boards. The required bootloader-side setup for
that option is implemented in NVIDIA's various downstream U-Boot branches,
but the U-Boot maintainers have refused to accept it upstream.

This change implements an alternative automatic UART selection option
using ODMDATA. This is a 32-bit value programmed into Tegra's boot memory
which provides a few pieces of basic board-specific information, including
a field that indicates the console UART. Setting up this value is part of
the standard Tegra boot architecture, and so requires no Tegra-specific
hacks in the bootloader's UART driver.

Note that in theory, the format of ODMDATA is board-specific. However, in
practice all boards use the same location/size/values for the UART field.
ODMDATA[19:18] (which drive the type of debug console) is more problematic,
since some boards use value 2 for UART and others use 3. This patch just
accepts either value; if this doesn't work well for a given board, I'd
suggest simply not enabling this debug option when building for that board.

Note that the kernel assumes the bootloader has already set up any required
pinmux settings for the UART; there is no way the kernel can do this for
itself prior to knowing which board it's running on. In practice, people
using this feature are highly likely to be using bootloaders that have
indeed configured the pinmux. This assumption existed prior to this patch.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

1 files changed, 28 insertions, 1 deletions

diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig
index d0f2546706ca..204d3d4d7388 100644
--- a/arch/arm/mach-tegra/Kconfig
+++ b/arch/arm/mach-tegra/Kconfig
@@ -111,7 +111,7 @@ config MACH_VENTANA
          Support for the nVidia Ventana development platform
 
 choice
-        prompt "Low-level debug console UART"
+        prompt "Default low-level debug console UART"
         default TEGRA_DEBUG_UART_NONE
 
 config TEGRA_DEBUG_UART_NONE
@@ -134,6 +134,33 @@ config TEGRA_DEBUG_UARTE
 
 endchoice
 
+choice
+	prompt "Automatic low-level debug console UART"
+	default TEGRA_DEBUG_UART_AUTO_NONE
+
+config TEGRA_DEBUG_UART_AUTO_NONE
+	bool "None"
+
+config TEGRA_DEBUG_UART_AUTO_ODMDATA
+	bool "Via ODMDATA"
+	help
+	  Automatically determines which UART to use for low-level debug based
+	  on the ODMDATA value. This value is part of the BCT, and is written
+	  to the boot memory device using nvflash, or other flashing tool.
+	  When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
+	  0/1/2/3/4 are UART A/B/C/D/E.
+
+config TEGRA_DEBUG_UART_AUTO_SCRATCH
+	bool "Via UART scratch register"
+	help
+	  Automatically determines which UART to use for low-level debug based
+	  on the UART scratch register value. Some bootloaders put ASCII 'D'
+	  in this register when they initialize their own console UART output.
+	  Using this option allows the kernel to automatically pick the same
+	  UART.
+
+endchoice
+
 config TEGRA_SYSTEM_DMA
 	bool "Enable system DMA driver for NVIDIA Tegra SoCs"
 	default y