ARM: tegra: remove board (but not DT) support for Harmony

Harmony can be booted using device tree with equal functionality as when
booted using a board file. Remove as much of the board file as is
possible, since it's no longer needed.

Two special-cases are still left in board-dt-tegra20.c, since the Tegra
PCIe driver doesn't support device tree yet, and the Harmony .dts file
doesn't yet describe regulators which are needed for PCIe. This logic is
now enabled unconditionally rather than via CONFIG_MACH_HARMONY. While
this is more code than other boards, it's still unlikely to be much of a
problem, and both regulators and PCIe should be supported via device tree
in the near future, allowing the remaining code to be removed.

Signed-off-by: Stephen Warren <swarren@nvidia.com>

1 files changed, 0 insertions, 197 deletions

diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c
deleted file mode 100644
index e65e837f4013..000000000000
--- a/arch/arm/mach-tegra/board-harmony.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * arch/arm/mach-tegra/board-harmony.c
- *
- * Copyright (C) 2010 Google, Inc.
- * Copyright (C) 2011 NVIDIA, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/serial_8250.h>
-#include <linux/of_serial.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-#include <linux/pda_power.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-
-#include <sound/wm8903.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/gic.h>
-#include <asm/setup.h>
-
-#include <mach/tegra_wm8903_pdata.h>
-#include <mach/iomap.h>
-#include <mach/irqs.h>
-#include <mach/sdhci.h>
-
-#include "board.h"
-#include "board-harmony.h"
-#include "clock.h"
-#include "devices.h"
-#include "gpio-names.h"
-
-static struct plat_serial8250_port debug_uart_platform_data[] = {
-	{
-		.membase	= IO_ADDRESS(TEGRA_UARTD_BASE),
-		.mapbase	= TEGRA_UARTD_BASE,
-		.irq		= INT_UARTD,
-		.flags		= UPF_BOOT_AUTOCONF | UPF_FIXED_TYPE,
-		.type		= PORT_TEGRA,
-		.handle_break	= tegra_serial_handle_break,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= 216000000,
-	}, {
-		.flags		= 0
-	}
-};
-
-static struct platform_device debug_uart = {
-	.name = "serial8250",
-	.id = PLAT8250_DEV_PLATFORM,
-	.dev = {
-		.platform_data = debug_uart_platform_data,
-	},
-};
-
-static struct tegra_wm8903_platform_data harmony_audio_pdata = {
-	.gpio_spkr_en		= TEGRA_GPIO_SPKR_EN,
-	.gpio_hp_det		= TEGRA_GPIO_HP_DET,
-	.gpio_hp_mute		= -1,
-	.gpio_int_mic_en	= TEGRA_GPIO_INT_MIC_EN,
-	.gpio_ext_mic_en	= TEGRA_GPIO_EXT_MIC_EN,
-};
-
-static struct platform_device harmony_audio_device = {
-	.name	= "tegra-snd-wm8903",
-	.id	= 0,
-	.dev	= {
-		.platform_data  = &harmony_audio_pdata,
-	},
-};
-
-static struct wm8903_platform_data harmony_wm8903_pdata = {
-	.irq_active_low = 0,
-	.micdet_cfg = 0,
-	.micdet_delay = 100,
-	.gpio_base = HARMONY_GPIO_WM8903(0),
-	.gpio_cfg = {
-		0,
-		0,
-		WM8903_GPIO_CONFIG_ZERO,
-		0,
-		0,
-	},
-};
-
-static struct i2c_board_info __initdata wm8903_board_info = {
-	I2C_BOARD_INFO("wm8903", 0x1a),
-	.platform_data = &harmony_wm8903_pdata,
-};
-
-static void __init harmony_i2c_init(void)
-{
-	platform_device_register(&tegra_i2c_device1);
-	platform_device_register(&tegra_i2c_device2);
-	platform_device_register(&tegra_i2c_device3);
-	platform_device_register(&tegra_i2c_device4);
-
-	wm8903_board_info.irq = gpio_to_irq(TEGRA_GPIO_CDC_IRQ);
-	i2c_register_board_info(0, &wm8903_board_info, 1);
-}
-
-static struct platform_device *harmony_devices[] __initdata = {
-	&debug_uart,
-	&tegra_sdhci_device1,
-	&tegra_sdhci_device2,
-	&tegra_sdhci_device4,
-	&tegra_ehci3_device,
-	&tegra_i2s_device1,
-	&tegra_das_device,
-	&harmony_audio_device,
-};
-
-static void __init tegra_harmony_fixup(struct tag *tags, char **cmdline,
-	struct meminfo *mi)
-{
-	mi->nr_banks = 2;
-	mi->bank[0].start = PHYS_OFFSET;
-	mi->bank[0].size = 448 * SZ_1M;
-	mi->bank[1].start = SZ_512M;
-	mi->bank[1].size = SZ_512M;
-}
-
-static __initdata struct tegra_clk_init_table harmony_clk_init_table[] = {
-	/* name		parent		rate		enabled */
-	{ "uartd",	"pll_p",	216000000,	true },
-	{ "pll_a",	"pll_p_out1",	56448000,	true },
-	{ "pll_a_out0",	"pll_a",	11289600,	true },
-	{ "cdev1",	NULL,		0,		true },
-	{ "i2s1",	"pll_a_out0",	11289600,	false},
-	{ "usb3",	"clk_m",	12000000,	true },
-	{ NULL,		NULL,		0,		0},
-};
-
-
-static struct tegra_sdhci_platform_data sdhci_pdata1 = {
-	.cd_gpio	= -1,
-	.wp_gpio	= -1,
-	.power_gpio	= -1,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata2 = {
-	.cd_gpio	= TEGRA_GPIO_SD2_CD,
-	.wp_gpio	= TEGRA_GPIO_SD2_WP,
-	.power_gpio	= TEGRA_GPIO_SD2_POWER,
-};
-
-static struct tegra_sdhci_platform_data sdhci_pdata4 = {
-	.cd_gpio	= TEGRA_GPIO_SD4_CD,
-	.wp_gpio	= TEGRA_GPIO_SD4_WP,
-	.power_gpio	= TEGRA_GPIO_SD4_POWER,
-	.is_8bit	= 1,
-};
-
-static void __init tegra_harmony_init(void)
-{
-	tegra_clk_init_from_table(harmony_clk_init_table);
-
-	harmony_pinmux_init();
-
-	tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1;
-	tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2;
-	tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4;
-
-	platform_add_devices(harmony_devices, ARRAY_SIZE(harmony_devices));
-	harmony_i2c_init();
-	harmony_regulator_init();
-}
-
-MACHINE_START(HARMONY, "harmony")
-	.atag_offset	= 0x100,
-	.fixup		= tegra_harmony_fixup,
-	.map_io         = tegra_map_common_io,
-	.init_early	= tegra20_init_early,
-	.init_irq       = tegra_init_irq,
-	.handle_irq	= gic_handle_irq,
-	.timer          = &tegra_timer,
-	.init_machine   = tegra_harmony_init,
-	.init_late	= tegra_init_late,
-	.restart	= tegra_assert_system_reset,
-MACHINE_END