ARM: u300: convert to common clock

This converts the U300 clock implementation over to use the common
struct clk and moves the implementation down into drivers/clk.
Since VCO isn't used in tree it was removed, it's not hard to
put it back in if need be.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
[mturquette@linaro.org: trivial Makefile conflict]
Signed-off-by: Mike Turquette <mturquette@linaro.org>

1 files changed, 0 insertions, 1504 deletions

diff --git a/arch/arm/mach-u300/clock.c b/arch/arm/mach-u300/clock.c
deleted file mode 100644
index 5535dd0a78c9..000000000000
--- a/arch/arm/mach-u300/clock.c
+++ /dev/null
@@ -1,1504 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/clock.c
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Define clocks in the app platform.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
- */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/string.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/spinlock.h>
-#include <linux/debugfs.h>
-#include <linux/device.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/io.h>
-#include <linux/seq_file.h>
-#include <linux/clkdev.h>
-
-#include <mach/hardware.h>
-#include <mach/syscon.h>
-
-#include "clock.h"
-
-/*
- * TODO:
- * - move all handling of the CCR register into this file and create
- *   a spinlock for the CCR register
- * - switch to the clkdevice lookup mechanism that maps clocks to
- *   device ID:s instead when it becomes available in kernel 2.6.29.
- * - implement rate get/set for all clocks that need it.
- */
-
-/*
- * Syscon clock I/O registers lock so clock requests don't collide
- * NOTE: this is a local lock only used to lock access to clock and
- * reset registers in syscon.
- */
-static DEFINE_SPINLOCK(syscon_clkreg_lock);
-static DEFINE_SPINLOCK(syscon_resetreg_lock);
-
-/*
- * The clocking hierarchy currently looks like this.
- * NOTE: the idea is NOT to show how the clocks are routed on the chip!
- * The ideas is to show dependencies, so a clock higher up in the
- * hierarchy has to be on in order for another clock to be on. Now,
- * both CPU and DMA can actually be on top of the hierarchy, and that
- * is not modeled currently. Instead we have the backbone AMBA bus on
- * top. This bus cannot be programmed in any way but conceptually it
- * needs to be active for the bridges and devices to transport data.
- *
- * Please be aware that a few clocks are hw controlled, which mean that
- * the hw itself can turn on/off or change the rate of the clock when
- * needed!
- *
- *  AMBA bus
- *  |
- *  +- CPU
- *  +- FSMC NANDIF NAND Flash interface
- *  +- SEMI Shared Memory interface
- *  +- ISP Image Signal Processor (U335 only)
- *  +- CDS (U335 only)
- *  +- DMA Direct Memory Access Controller
- *  +- AAIF APP/ACC Inteface (Mobile Scalable Link, MSL)
- *  +- APEX
- *  +- VIDEO_ENC AVE2/3 Video Encoder
- *  +- XGAM Graphics Accelerator Controller
- *  +- AHB
- *  |
- *  +- ahb:0 AHB Bridge
- *  |  |
- *  |  +- ahb:1 INTCON Interrupt controller
- *  |  +- ahb:3 MSPRO  Memory Stick Pro controller
- *  |  +- ahb:4 EMIF   External Memory interface
- *  |
- *  +- fast:0 FAST bridge
- *  |  |
- *  |  +- fast:1 MMCSD MMC/SD card reader controller
- *  |  +- fast:2 I2S0  PCM I2S channel 0 controller
- *  |  +- fast:3 I2S1  PCM I2S channel 1 controller
- *  |  +- fast:4 I2C0  I2C channel 0 controller
- *  |  +- fast:5 I2C1  I2C channel 1 controller
- *  |  +- fast:6 SPI   SPI controller
- *  |  +- fast:7 UART1 Secondary UART (U335 only)
- *  |
- *  +- slow:0 SLOW bridge
- *     |
- *     +- slow:1 SYSCON (not possible to control)
- *     +- slow:2 WDOG Watchdog
- *     +- slow:3 UART0 primary UART
- *     +- slow:4 TIMER_APP Application timer - used in Linux
- *     +- slow:5 KEYPAD controller
- *     +- slow:6 GPIO controller
- *     +- slow:7 RTC controller
- *     +- slow:8 BT Bus Tracer (not used currently)
- *     +- slow:9 EH Event Handler (not used currently)
- *     +- slow:a TIMER_ACC Access style timer (not used currently)
- *     +- slow:b PPM (U335 only, what is that?)
- */
-
-/*
- * Reset control functions. We remember if a block has been
- * taken out of reset and don't remove the reset assertion again
- * and vice versa. Currently we only remove resets so the
- * enablement function is defined out.
- */
-static void syscon_block_reset_enable(struct clk *clk)
-{
-	u16 val;
-	unsigned long iflags;
-
-	/* Not all blocks support resetting */
-	if (!clk->res_reg || !clk->res_mask)
-		return;
-	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
-	val = readw(clk->res_reg);
-	val |= clk->res_mask;
-	writew(val, clk->res_reg);
-	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
-	clk->reset = true;
-}
-
-static void syscon_block_reset_disable(struct clk *clk)
-{
-	u16 val;
-	unsigned long iflags;
-
-	/* Not all blocks support resetting */
-	if (!clk->res_reg || !clk->res_mask)
-		return;
-	spin_lock_irqsave(&syscon_resetreg_lock, iflags);
-	val = readw(clk->res_reg);
-	val &= ~clk->res_mask;
-	writew(val, clk->res_reg);
-	spin_unlock_irqrestore(&syscon_resetreg_lock, iflags);
-	clk->reset = false;
-}
-
-int __clk_get(struct clk *clk)
-{
-	u16 val;
-
-	/* The MMC and MSPRO clocks need some special set-up */
-	if (!strcmp(clk->name, "MCLK")) {
-		/* Set default MMC clock divisor to 18.9 MHz */
-		writew(0x0054U, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
-		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-		/* Disable the MMC feedback clock */
-		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
-		/* Disable MSPRO frequency */
-		val &= ~U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
-		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-	}
-	if (!strcmp(clk->name, "MSPRO")) {
-		val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-		/* Disable the MMC feedback clock */
-		val &= ~U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE;
-		/* Enable MSPRO frequency */
-		val |= U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE;
-		writew(val, U300_SYSCON_VBASE + U300_SYSCON_MMCR);
-	}
-	return 1;
-}
-EXPORT_SYMBOL(__clk_get);
-
-void __clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(__clk_put);
-
-static void syscon_clk_disable(struct clk *clk)
-{
-	unsigned long iflags;
-
-	/* Don't touch the hardware controlled clocks */
-	if (clk->hw_ctrld)
-		return;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCDR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void syscon_clk_enable(struct clk *clk)
-{
-	unsigned long iflags;
-
-	/* Don't touch the hardware controlled clocks */
-	if (clk->hw_ctrld)
-		return;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	writew(clk->clk_val, U300_SYSCON_VBASE + U300_SYSCON_SBCER);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static u16 syscon_clk_get_rate(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-	return val;
-}
-
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-static void enable_i2s0_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Set I2S0 to use the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_I2S0_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val |= U300_SYSCON_CEFR_I2S0_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void enable_i2s1_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Set I2S1 to use the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val |= U300_SYSCON_CCR_I2S1_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val |= U300_SYSCON_CEFR_I2S1_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void disable_i2s0_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Disable I2S0 use of the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_I2S0_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Deactivate VCXO if no one else is using VCXO */
-	if (!(val & U300_SYSCON_CCR_I2S1_USE_VCXO))
-		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-static void disable_i2s1_vcxo(void)
-{
-	u16 val;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	/* Disable I2S1 use of the VCXO 26 MHz clock */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_I2S1_USE_VCXO;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Deactivate VCXO if no one else is using VCXO */
-	if (!(val & U300_SYSCON_CCR_I2S0_USE_VCXO))
-		val &= ~U300_SYSCON_CCR_TURN_VCXO_ON;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	val &= ~U300_SYSCON_CEFR_I2S0_CLK_EN;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CEFR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-#endif /* CONFIG_MACH_U300_USE_I2S_AS_MASTER */
-
-
-static void syscon_clk_rate_set_mclk(unsigned long rate)
-{
-	u16 val;
-	u32 reg;
-	unsigned long iflags;
-
-	switch (rate) {
-	case 18900000:
-		val = 0x0054;
-		break;
-	case 20800000:
-		val = 0x0044;
-		break;
-	case 23100000:
-		val = 0x0043;
-		break;
-	case 26000000:
-		val = 0x0033;
-		break;
-	case 29700000:
-		val = 0x0032;
-		break;
-	case 34700000:
-		val = 0x0022;
-		break;
-	case 41600000:
-		val = 0x0021;
-		break;
-	case 52000000:
-		val = 0x0011;
-		break;
-	case 104000000:
-		val = 0x0000;
-		break;
-	default:
-		printk(KERN_ERR "Trying to set MCLK to unknown speed! %ld\n",
-		       rate);
-		return;
-	}
-
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	reg = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
-		~U300_SYSCON_MMF0R_MASK;
-	writew(reg | val, U300_SYSCON_VBASE + U300_SYSCON_MMF0R);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-
-void syscon_clk_rate_set_cpuclk(unsigned long rate)
-{
-	u16 val;
-	unsigned long iflags;
-
-	switch (rate) {
-	case 13000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER;
-		break;
-	case 52000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE;
-		break;
-	case 104000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH;
-		break;
-	case 208000000:
-		val = U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST;
-		break;
-	default:
-		return;
-	}
-	spin_lock_irqsave(&syscon_clkreg_lock, iflags);
-	val |= readw(U300_SYSCON_VBASE + U300_SYSCON_CCR) &
-		~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK ;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	spin_unlock_irqrestore(&syscon_clkreg_lock, iflags);
-}
-EXPORT_SYMBOL(syscon_clk_rate_set_cpuclk);
-
-void clk_disable(struct clk *clk)
-{
-	unsigned long iflags;
-
-	spin_lock_irqsave(&clk->lock, iflags);
-	if (clk->usecount > 0 && !(--clk->usecount)) {
-		/* some blocks lack clocking registers and cannot be disabled */
-		if (clk->disable)
-			clk->disable(clk);
-		if (likely((u32)clk->parent))
-			clk_disable(clk->parent);
-	}
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-	if (unlikely(!strcmp(clk->name, "I2S0")))
-		disable_i2s0_vcxo();
-	if (unlikely(!strcmp(clk->name, "I2S1")))
-		disable_i2s1_vcxo();
-#endif
-	spin_unlock_irqrestore(&clk->lock, iflags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-int clk_enable(struct clk *clk)
-{
-	int ret = 0;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&clk->lock, iflags);
-	if (clk->usecount++ == 0) {
-		if (likely((u32)clk->parent))
-			ret = clk_enable(clk->parent);
-
-		if (unlikely(ret != 0))
-			clk->usecount--;
-		else {
-			/* remove reset line (we never enable reset again) */
-			syscon_block_reset_disable(clk);
-			/* clocks without enable function are always on */
-			if (clk->enable)
-				clk->enable(clk);
-#ifdef CONFIG_MACH_U300_USE_I2S_AS_MASTER
-			if (unlikely(!strcmp(clk->name, "I2S0")))
-				enable_i2s0_vcxo();
-			if (unlikely(!strcmp(clk->name, "I2S1")))
-				enable_i2s1_vcxo();
-#endif
-		}
-	}
-	spin_unlock_irqrestore(&clk->lock, iflags);
-	return ret;
-
-}
-EXPORT_SYMBOL(clk_enable);
-
-/* Returns the clock rate in Hz */
-static unsigned long clk_get_rate_cpuclk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 52000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-		return 104000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 208000000;
-	default:
-		break;
-	}
-	return clk->rate;
-}
-
-static unsigned long clk_get_rate_ahb_clk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 6500000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 26000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 52000000;
-	default:
-		break;
-	}
-	return clk->rate;
-
-}
-
-static unsigned long clk_get_rate_emif_clk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 52000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 104000000;
-	default:
-		break;
-	}
-	return clk->rate;
-
-}
-
-static unsigned long clk_get_rate_xgamclk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 6500000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-		return 26000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 52000000;
-	default:
-		break;
-	}
-
-	return clk->rate;
-}
-
-static unsigned long clk_get_rate_mclk(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-		/*
-		 * Here, the 208 MHz PLL gets shut down and the always
-		 * on 13 MHz PLL used for RTC etc kicks into use
-		 * instead.
-		 */
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-	{
-		/*
-		 * This clock is under program control. The register is
-		 * divided in two nybbles, bit 7-4 gives cycles-1 to count
-		 * high, bit 3-0 gives cycles-1 to count low. Distribute
-		 * these with no more than 1 cycle difference between
-		 * low and high and add low and high to get the actual
-		 * divisor. The base PLL is 208 MHz. Writing 0x00 will
-		 * divide by 1 and 1 so the highest frequency possible
-		 * is 104 MHz.
-		 *
-		 * e.g. 0x54 =>
-		 * f = 208 / ((5+1) + (4+1)) = 208 / 11 = 18.9 MHz
-		 */
-		u16 val = readw(U300_SYSCON_VBASE + U300_SYSCON_MMF0R) &
-			U300_SYSCON_MMF0R_MASK;
-		switch (val) {
-		case 0x0054:
-			return 18900000;
-		case 0x0044:
-			return 20800000;
-		case 0x0043:
-			return 23100000;
-		case 0x0033:
-			return 26000000;
-		case 0x0032:
-			return 29700000;
-		case 0x0022:
-			return 34700000;
-		case 0x0021:
-			return 41600000;
-		case 0x0011:
-			return 52000000;
-		case 0x0000:
-			return 104000000;
-		default:
-			break;
-		}
-	}
-	default:
-		break;
-	}
-
-	return clk->rate;
-}
-
-static unsigned long clk_get_rate_i2s_i2c_spi(struct clk *clk)
-{
-	u16 val;
-
-	val = syscon_clk_get_rate();
-
-	switch (val) {
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW:
-		return 13000000;
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH:
-	case U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST:
-		return 26000000;
-	default:
-		break;
-	}
-
-	return clk->rate;
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-	if (clk->get_rate)
-		return clk->get_rate(clk);
-	else
-		return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-static unsigned long clk_round_rate_mclk(struct clk *clk, unsigned long rate)
-{
-	if (rate <= 18900000)
-		return 18900000;
-	if (rate <= 20800000)
-		return 20800000;
-	if (rate <= 23100000)
-		return 23100000;
-	if (rate <= 26000000)
-		return 26000000;
-	if (rate <= 29700000)
-		return 29700000;
-	if (rate <= 34700000)
-		return 34700000;
-	if (rate <= 41600000)
-		return 41600000;
-	if (rate <= 52000000)
-		return 52000000;
-	return -EINVAL;
-}
-
-static unsigned long clk_round_rate_cpuclk(struct clk *clk, unsigned long rate)
-{
-	if (rate <= 13000000)
-		return 13000000;
-	if (rate <= 52000000)
-		return 52000000;
-	if (rate <= 104000000)
-		return 104000000;
-	if (rate <= 208000000)
-		return 208000000;
-	return -EINVAL;
-}
-
-/*
- * This adjusts a requested rate to the closest exact rate
- * a certain clock can provide. For a fixed clock it's
- * mostly clk->rate.
- */
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
-	/* TODO: get appropriate switches for EMIFCLK, AHBCLK and MCLK */
-	/* Else default to fixed value */
-
-	if (clk->round_rate) {
-		return (long) clk->round_rate(clk, rate);
-	} else {
-		printk(KERN_ERR "clock: Failed to round rate of %s\n",
-		       clk->name);
-	}
-	return (long) clk->rate;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-static int clk_set_rate_mclk(struct clk *clk, unsigned long rate)
-{
-	syscon_clk_rate_set_mclk(clk_round_rate(clk, rate));
-	return 0;
-}
-
-static int clk_set_rate_cpuclk(struct clk *clk, unsigned long rate)
-{
-	syscon_clk_rate_set_cpuclk(clk_round_rate(clk, rate));
-	return 0;
-}
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
-	/* TODO: set for EMIFCLK and AHBCLK */
-	/* Else assume the clock is fixed and fail */
-	if (clk->set_rate) {
-		return clk->set_rate(clk, rate);
-	} else {
-		printk(KERN_ERR "clock: Failed to set %s to %ld hz\n",
-		       clk->name, rate);
-		return -EINVAL;
-	}
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-/*
- * Clock definitions. The clock parents are set to respective
- * bridge and the clock framework makes sure that the clocks have
- * parents activated and are brought out of reset when in use.
- *
- * Clocks that have hw_ctrld = true are hw controlled, and the hw
- * can by itself turn these clocks on and off.
- * So in other words, we don't really have to care about them.
- */
-
-static struct clk amba_clk = {
-	.name	    = "AMBA",
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = false,
-	.lock       = __SPIN_LOCK_UNLOCKED(amba_clk.lock),
-};
-
-/*
- * These blocks are connected directly to the AMBA bus
- * with no bridge.
- */
-
-static struct clk cpu_clk = {
-	.name	    = "CPU",
-	.parent	    = &amba_clk,
-	.rate	    = 208000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_CPU_RESET_EN,
-	.set_rate   = clk_set_rate_cpuclk,
-	.get_rate   = clk_get_rate_cpuclk,
-	.round_rate = clk_round_rate_cpuclk,
-	.lock       = __SPIN_LOCK_UNLOCKED(cpu_clk.lock),
-};
-
-static struct clk nandif_clk = {
-	.name       = "FSMC",
-	.parent	    = &amba_clk,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_NANDIF_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_NANDIF_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(nandif_clk.lock),
-};
-
-static struct clk semi_clk = {
-	.name       = "SEMI",
-	.parent	    = &amba_clk,
-	.rate       = 0, /* FIXME */
-	/* It is not possible to reset SEMI */
-	.hw_ctrld   = false,
-	.reset	    = false,
-	.clk_val    = U300_SYSCON_SBCER_SEMI_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(semi_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk isp_clk = {
-	.name	    = "ISP",
-	.parent	    = &amba_clk,
-	.rate	    = 0, /* FIXME */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_ISP_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_ISP_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(isp_clk.lock),
-};
-
-static struct clk cds_clk = {
-	.name	    = "CDS",
-	.parent	    = &amba_clk,
-	.rate	    = 0, /* FIXME */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_CDS_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_CDS_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(cds_clk.lock),
-};
-#endif
-
-static struct clk dma_clk = {
-	.name       = "DMA",
-	.parent	    = &amba_clk,
-	.rate       = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_DMAC_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_DMAC_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(dma_clk.lock),
-};
-
-static struct clk aaif_clk = {
-	.name       = "AAIF",
-	.parent	    = &amba_clk,
-	.rate       = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_AAIF_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_AAIF_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(aaif_clk.lock),
-};
-
-static struct clk apex_clk = {
-	.name       = "APEX",
-	.parent	    = &amba_clk,
-	.rate       = 0, /* FIXME */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_APEX_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_APEX_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(apex_clk.lock),
-};
-
-static struct clk video_enc_clk = {
-	.name       = "VIDEO_ENC",
-	.parent	    = &amba_clk,
-	.rate       = 208000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = false,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	/* This has XGAM in the name but refers to the video encoder */
-	.res_mask   = U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(video_enc_clk.lock),
-};
-
-static struct clk xgam_clk = {
-	.name       = "XGAMCLK",
-	.parent	    = &amba_clk,
-	.rate       = 52000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_XGAM_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_XGAM_CLK_EN,
-	.get_rate   = clk_get_rate_xgamclk,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(xgam_clk.lock),
-};
-
-/* This clock is used to activate the video encoder */
-static struct clk ahb_clk = {
-	.name	    = "AHB",
-	.parent	    = &amba_clk,
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = false, /* This one is set to false due to HW bug */
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_AHB_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_AHB_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_ahb_clk,
-	.lock       = __SPIN_LOCK_UNLOCKED(ahb_clk.lock),
-};
-
-
-/*
- * Clocks on the AHB bridge
- */
-
-static struct clk ahb_subsys_clk = {
-	.name	    = "AHB_SUBSYS",
-	.parent	    = &amba_clk,
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = false,
-	.clk_val    = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_ahb_clk,
-	.lock       = __SPIN_LOCK_UNLOCKED(ahb_subsys_clk.lock),
-};
-
-static struct clk intcon_clk = {
-	.name	    = "INTCON",
-	.parent	    = &ahb_subsys_clk,
-	.rate	    = 52000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_INTCON_RESET_EN,
-	/* INTCON can be reset but not clock-gated */
-	.lock       = __SPIN_LOCK_UNLOCKED(intcon_clk.lock),
-
-};
-
-static struct clk mspro_clk = {
-	.name       = "MSPRO",
-	.parent	    = &ahb_subsys_clk,
-	.rate       = 0, /* FIXME */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_MSPRO_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_MSPRO_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(mspro_clk.lock),
-};
-
-static struct clk emif_clk = {
-	.name	    = "EMIF",
-	.parent	    = &ahb_subsys_clk,
-	.rate	    = 104000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RRR,
-	.res_mask   = U300_SYSCON_RRR_EMIF_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_EMIF_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_emif_clk,
-	.lock       = __SPIN_LOCK_UNLOCKED(emif_clk.lock),
-};
-
-
-/*
- * Clocks on the FAST bridge
- */
-static struct clk fast_clk = {
-	.name	    = "FAST_BRIDGE",
-	.parent	    = &amba_clk,
-	.rate	    = 13000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(fast_clk.lock),
-};
-
-/*
- * The MMCI apb_pclk is hardwired to the same terminal as the
- * external MCI clock. Thus this will be referenced twice.
- */
-static struct clk mmcsd_clk = {
-	.name       = "MCLK",
-	.parent	    = &fast_clk,
-	.rate       = 18900000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_MMC_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_MMC_CLK_EN,
-	.get_rate   = clk_get_rate_mclk,
-	.set_rate   = clk_set_rate_mclk,
-	.round_rate = clk_round_rate_mclk,
-	.disable    = syscon_clk_disable,
-	.enable     = syscon_clk_enable,
-	.lock       = __SPIN_LOCK_UNLOCKED(mmcsd_clk.lock),
-};
-
-static struct clk i2s0_clk = {
-	.name       = "i2s0",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2S0_CORE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2s0_clk.lock),
-};
-
-static struct clk i2s1_clk = {
-	.name       = "i2s1",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2S1_CORE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2s1_clk.lock),
-};
-
-static struct clk i2c0_clk = {
-	.name       = "I2C0",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_I2C0_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2C0_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2c0_clk.lock),
-};
-
-static struct clk i2c1_clk = {
-	.name       = "I2C1",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_I2C1_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_I2C1_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(i2c1_clk.lock),
-};
-
-/*
- * The SPI apb_pclk is hardwired to the same terminal as the
- * external SPI clock. Thus this will be referenced twice.
- */
-static struct clk spi_clk = {
-	.name       = "SPI",
-	.parent	    = &fast_clk,
-	.rate       = 26000000, /* this varies! */
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_SPI_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_SPI_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.get_rate   = clk_get_rate_i2s_i2c_spi,
-	.lock       = __SPIN_LOCK_UNLOCKED(spi_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk uart1_pclk = {
-	.name	    = "UART1_PCLK",
-	.parent	    = &fast_clk,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RFR,
-	.res_mask   = U300_SYSCON_RFR_UART1_RESET_ENABLE,
-	.clk_val    = U300_SYSCON_SBCER_UART1_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart1_pclk.lock),
-};
-
-/* This one is hardwired to PLL13 */
-static struct clk uart1_clk = {
-	.name	    = "UART1_CLK",
-	.rate	    = 13000000,
-	.hw_ctrld   = true,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart1_clk.lock),
-};
-#endif
-
-
-/*
- * Clocks on the SLOW bridge
- */
-static struct clk slow_clk = {
-	.name	    = "SLOW_BRIDGE",
-	.parent	    = &amba_clk,
-	.rate	    = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(slow_clk.lock),
-};
-
-/* TODO: implement SYSCON clock? */
-
-static struct clk wdog_clk = {
-	.name	    = "WDOG",
-	.parent	    = &slow_clk,
-	.hw_ctrld   = false,
-	.rate	    = 32768,
-	.reset	    = false,
-	/* This is always on, cannot be enabled/disabled or reset */
-	.lock       = __SPIN_LOCK_UNLOCKED(wdog_clk.lock),
-};
-
-static struct clk uart0_pclk = {
-	.name	    = "UART0_PCLK",
-	.parent	    = &slow_clk,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_UART_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_UART_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart0_pclk.lock),
-};
-
-/* This one is hardwired to PLL13 */
-static struct clk uart0_clk = {
-	.name	    = "UART0_CLK",
-	.parent	    = &slow_clk,
-	.rate	    = 13000000,
-	.hw_ctrld   = true,
-	.lock       = __SPIN_LOCK_UNLOCKED(uart0_clk.lock),
-};
-
-static struct clk keypad_clk = {
-	.name       = "KEYPAD",
-	.parent	    = &slow_clk,
-	.rate       = 32768,
-	.hw_ctrld   = false,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_KEYPAD_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_KEYPAD_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(keypad_clk.lock),
-};
-
-static struct clk gpio_clk = {
-	.name       = "GPIO",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_GPIO_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_GPIO_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(gpio_clk.lock),
-};
-
-static struct clk rtc_clk = {
-	.name	    = "RTC",
-	.parent	    = &slow_clk,
-	.rate	    = 32768,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_RTC_RESET_EN,
-	/* This clock is always on, cannot be enabled/disabled */
-	.lock       = __SPIN_LOCK_UNLOCKED(rtc_clk.lock),
-};
-
-static struct clk bustr_clk = {
-	.name       = "BUSTR",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_BTR_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_BTR_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(bustr_clk.lock),
-};
-
-static struct clk evhist_clk = {
-	.name       = "EVHIST",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_EH_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_EH_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(evhist_clk.lock),
-};
-
-static struct clk timer_clk = {
-	.name       = "TIMER",
-	.parent	    = &slow_clk,
-	.rate       = 13000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_ACC_TMR_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_ACC_TMR_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(timer_clk.lock),
-};
-
-/*
- * There is a binary divider in the hardware that divides
- * the 13MHz PLL by 13 down to 1 MHz.
- */
-static struct clk app_timer_clk = {
-	.name       = "TIMER_APP",
-	.parent	    = &slow_clk,
-	.rate       = 1000000,
-	.hw_ctrld   = true,
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_APP_TMR_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_APP_TMR_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(app_timer_clk.lock),
-};
-
-#ifdef CONFIG_MACH_U300_BS335
-static struct clk ppm_clk = {
-	.name	    = "PPM",
-	.parent	    = &slow_clk,
-	.rate	    = 0, /* FIXME */
-	.hw_ctrld   = true, /* TODO: Look up if it is hw ctrld or not */
-	.reset	    = true,
-	.res_reg    = U300_SYSCON_VBASE + U300_SYSCON_RSR,
-	.res_mask   = U300_SYSCON_RSR_PPM_RESET_EN,
-	.clk_val    = U300_SYSCON_SBCER_PPM_CLK_EN,
-	.enable     = syscon_clk_enable,
-	.disable    = syscon_clk_disable,
-	.lock       = __SPIN_LOCK_UNLOCKED(ppm_clk.lock),
-};
-#endif
-
-#define DEF_LOOKUP(devid, clkref)		\
-	{					\
-	.dev_id = devid,			\
-	.clk = clkref,				\
-	}
-
-#define DEF_LOOKUP_CON(devid, conid, clkref)	\
-	{					\
-	.dev_id = devid,			\
-	.con_id = conid,			\
-	.clk = clkref,				\
-	}
-
-/*
- * Here we only define clocks that are meaningful to
- * look up through clockdevice.
- */
-static struct clk_lookup lookups[] = {
-	/* Connected directly to the AMBA bus */
-	DEF_LOOKUP("amba",      &amba_clk),
-	DEF_LOOKUP("cpu",       &cpu_clk),
-	DEF_LOOKUP("fsmc-nand", &nandif_clk),
-	DEF_LOOKUP("semi",      &semi_clk),
-#ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("isp",       &isp_clk),
-	DEF_LOOKUP("cds",       &cds_clk),
-#endif
-	DEF_LOOKUP("dma",       &dma_clk),
-	DEF_LOOKUP("msl",       &aaif_clk),
-	DEF_LOOKUP("apex",      &apex_clk),
-	DEF_LOOKUP("video_enc", &video_enc_clk),
-	DEF_LOOKUP("xgam",      &xgam_clk),
-	DEF_LOOKUP("ahb",       &ahb_clk),
-	/* AHB bridge clocks */
-	DEF_LOOKUP("ahb_subsys", &ahb_subsys_clk),
-	DEF_LOOKUP("intcon",    &intcon_clk),
-	DEF_LOOKUP_CON("intcon", "apb_pclk", &intcon_clk),
-	DEF_LOOKUP("mspro",     &mspro_clk),
-	DEF_LOOKUP("pl172",     &emif_clk),
-	DEF_LOOKUP_CON("pl172", "apb_pclk", &emif_clk),
-	/* FAST bridge clocks */
-	DEF_LOOKUP("fast",      &fast_clk),
-	DEF_LOOKUP("mmci",      &mmcsd_clk),
-	DEF_LOOKUP_CON("mmci", "apb_pclk", &mmcsd_clk),
-	/*
-	 * The .0 and .1 identifiers on these comes from the platform device
-	 * .id field and are assigned when the platform devices are registered.
-	 */
-	DEF_LOOKUP("i2s.0",     &i2s0_clk),
-	DEF_LOOKUP("i2s.1",     &i2s1_clk),
-	DEF_LOOKUP("stu300.0",  &i2c0_clk),
-	DEF_LOOKUP("stu300.1",  &i2c1_clk),
-	DEF_LOOKUP("pl022",     &spi_clk),
-	DEF_LOOKUP_CON("pl022", "apb_pclk", &spi_clk),
-#ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("uart1",     &uart1_clk),
-	DEF_LOOKUP_CON("uart1", "apb_pclk", &uart1_pclk),
-#endif
-	/* SLOW bridge clocks */
-	DEF_LOOKUP("slow",      &slow_clk),
-	DEF_LOOKUP("coh901327_wdog",      &wdog_clk),
-	DEF_LOOKUP("uart0",     &uart0_clk),
-	DEF_LOOKUP_CON("uart0", "apb_pclk", &uart0_pclk),
-	DEF_LOOKUP("apptimer",  &app_timer_clk),
-	DEF_LOOKUP("coh901461-keypad",    &keypad_clk),
-	DEF_LOOKUP("u300-gpio", &gpio_clk),
-	DEF_LOOKUP("rtc-coh901331",      &rtc_clk),
-	DEF_LOOKUP("bustr",     &bustr_clk),
-	DEF_LOOKUP("evhist",    &evhist_clk),
-	DEF_LOOKUP("timer",     &timer_clk),
-#ifdef CONFIG_MACH_U300_BS335
-	DEF_LOOKUP("ppm",       &ppm_clk),
-#endif
-};
-
-static void __init clk_register(void)
-{
-	/* Register the lookups */
-	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-}
-
-#if (defined(CONFIG_DEBUG_FS) && defined(CONFIG_U300_DEBUG))
-/*
- * The following makes it possible to view the status (especially
- * reference count and reset status) for the clocks in the platform
- * by looking into the special file <debugfs>/u300_clocks
- */
-
-/* A list of all clocks in the platform */
-static struct clk *clks[] = {
-	/* Top node clock for the AMBA bus */
-	&amba_clk,
-	/* Connected directly to the AMBA bus */
-	&cpu_clk,
-	&nandif_clk,
-	&semi_clk,
-#ifdef CONFIG_MACH_U300_BS335
-	&isp_clk,
-	&cds_clk,
-#endif
-	&dma_clk,
-	&aaif_clk,
-	&apex_clk,
-	&video_enc_clk,
-	&xgam_clk,
-	&ahb_clk,
-
-	/* AHB bridge clocks */
-	&ahb_subsys_clk,
-	&intcon_clk,
-	&mspro_clk,
-	&emif_clk,
-	/* FAST bridge clocks */
-	&fast_clk,
-	&mmcsd_clk,
-	&i2s0_clk,
-	&i2s1_clk,
-	&i2c0_clk,
-	&i2c1_clk,
-	&spi_clk,
-#ifdef CONFIG_MACH_U300_BS335
-	&uart1_clk,
-	&uart1_pclk,
-#endif
-	/* SLOW bridge clocks */
-	&slow_clk,
-	&wdog_clk,
-	&uart0_clk,
-	&uart0_pclk,
-	&app_timer_clk,
-	&keypad_clk,
-	&gpio_clk,
-	&rtc_clk,
-	&bustr_clk,
-	&evhist_clk,
-	&timer_clk,
-#ifdef CONFIG_MACH_U300_BS335
-	&ppm_clk,
-#endif
-};
-
-static int u300_clocks_show(struct seq_file *s, void *data)
-{
-	struct clk *clk;
-	int i;
-
-	seq_printf(s, "CLOCK           DEVICE          RESET STATE\t" \
-		   "ACTIVE\tUSERS\tHW CTRL FREQ\n");
-	seq_printf(s, "---------------------------------------------" \
-		   "-----------------------------------------\n");
-	for (i = 0; i < ARRAY_SIZE(clks); i++) {
-		clk = clks[i];
-		if (clk != ERR_PTR(-ENOENT)) {
-			/* Format clock and device name nicely */
-			char cdp[33];
-			int chars;
-
-			chars = snprintf(&cdp[0], 17, "%s", clk->name);
-			while (chars < 16) {
-				cdp[chars] = ' ';
-				chars++;
-			}
-			chars = snprintf(&cdp[16], 17, "%s", clk->dev ?
-					 dev_name(clk->dev) : "N/A");
-			while (chars < 16) {
-				cdp[chars+16] = ' ';
-				chars++;
-			}
-			cdp[32] = '\0';
-			if (clk->get_rate || clk->rate != 0)
-				seq_printf(s,
-					   "%s%s\t%s\t%d\t%s\t%lu Hz\n",
-					   &cdp[0],
-					   clk->reset ?
-					   "ASSERTED" : "RELEASED",
-					   clk->usecount ? "ON" : "OFF",
-					   clk->usecount,
-					   clk->hw_ctrld  ? "YES" : "NO ",
-					   clk_get_rate(clk));
-			else
-				seq_printf(s,
-					   "%s%s\t%s\t%d\t%s\t" \
-					   "(unknown rate)\n",
-					   &cdp[0],
-					   clk->reset ?
-					   "ASSERTED" : "RELEASED",
-					   clk->usecount ? "ON" : "OFF",
-					   clk->usecount,
-					   clk->hw_ctrld  ? "YES" : "NO ");
-		}
-	}
-	return 0;
-}
-
-static int u300_clocks_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, u300_clocks_show, NULL);
-}
-
-static const struct file_operations u300_clocks_operations = {
-	.open		= u300_clocks_open,
-	.read		= seq_read,
-	.llseek		= seq_lseek,
-	.release	= single_release,
-};
-
-static int __init init_clk_read_debugfs(void)
-{
-	/* Expose a simple debugfs interface to view all clocks */
-	(void) debugfs_create_file("u300_clocks", S_IFREG | S_IRUGO,
-				   NULL, NULL,
-				   &u300_clocks_operations);
-	return 0;
-}
-/*
- * This needs to come in after the core_initcall() for the
- * overall clocks, because debugfs is not available until
- * the subsystems come up.
- */
-module_init(init_clk_read_debugfs);
-#endif
-
-int __init u300_clock_init(void)
-{
-	u16 val;
-
-	/*
-	 * FIXME: shall all this powermanagement stuff really live here???
-	 */
-
-	/* Set system to run at PLL208, max performance, a known state. */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	val &= ~U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_CCR);
-	/* Wait for the PLL208 to lock if not locked in yet */
-	while (!(readw(U300_SYSCON_VBASE + U300_SYSCON_CSR) &
-		 U300_SYSCON_CSR_PLL208_LOCK_IND));
-
-	/* Power management enable */
-	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
-	val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE;
-	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
-
-	clk_register();
-
-	/*
-	 * Some of these may be on when we boot the system so make sure they
-	 * are turned OFF.
-	 */
-	syscon_block_reset_enable(&timer_clk);
-	timer_clk.disable(&timer_clk);
-
-	/*
-	 * These shall be turned on by default when we boot the system
-	 * so make sure they are ON. (Adding CPU here is a bit too much.)
-	 * These clocks will be claimed by drivers later.
-	 */
-	syscon_block_reset_disable(&semi_clk);
-	syscon_block_reset_disable(&emif_clk);
-	clk_enable(&semi_clk);
-	clk_enable(&emif_clk);
-
-	return 0;
-}