summaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-ux500
diff options
context:
space:
mode:
authorLinus Walleij <linus.walleij@linaro.org>2011-02-15 15:01:35 +0100
committerLinus Walleij <linus.walleij@linaro.org>2011-03-14 14:05:16 +0100
commit4b4f757c807375564ce3d4ff1d088d3847c52f6d (patch)
treeeac756e13f38cb9fd899df6225665a0d8caaff62 /arch/arm/mach-ux500
parentmach-ux500: add hrefv60 GPIO pins (diff)
downloadlinux-4b4f757c807375564ce3d4ff1d088d3847c52f6d.tar.xz
linux-4b4f757c807375564ce3d4ff1d088d3847c52f6d.zip
mach-ux500: basic HREFv60 support v2
The HREFv60 variant of the MOP500 family of boards remove the external GPIO expander and route these pins back to some of the readily available internal GPIO pins instead. Based on a patch by Bibek Basu <bibek.basu@stericsson.com> for an internal kernel version. Cc: Bibek Basu <bibek.basu@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/mach-ux500')
-rw-r--r--arch/arm/mach-ux500/board-mop500-sdi.c42
-rw-r--r--arch/arm/mach-ux500/board-mop500-stuib.c12
-rw-r--r--arch/arm/mach-ux500/board-mop500.c23
-rw-r--r--arch/arm/mach-ux500/board-mop500.h14
-rw-r--r--arch/arm/mach-ux500/include/mach/uncompress.h6
5 files changed, 81 insertions, 16 deletions
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 68c8375e45c6..bf0b02414e5b 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -12,6 +12,7 @@
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
+#include <asm/mach-types.h>
#include <plat/ste_dma40.h>
#include <mach/devices.h>
#include <mach/hardware.h>
@@ -68,7 +69,6 @@ static struct mmci_platform_data mop500_sdi0_data = {
.ocr_mask = MMC_VDD_29_30,
.f_max = 100000000,
.capabilities = MMC_CAP_4_BIT_DATA,
- .gpio_cd = GPIO_SDMMC_CD,
.gpio_wp = -1,
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
@@ -77,23 +77,40 @@ static struct mmci_platform_data mop500_sdi0_data = {
#endif
};
-void mop500_sdi_tc35892_init(void)
+/* GPIO pins used by the sdi0 level shifter */
+static int sdi0_en = -1;
+static int sdi0_vsel = -1;
+
+static void sdi0_configure(void)
{
int ret;
- ret = gpio_request(GPIO_SDMMC_EN, "SDMMC_EN");
+ ret = gpio_request(sdi0_en, "level shifter enable");
if (!ret)
- ret = gpio_request(GPIO_SDMMC_1V8_3V_SEL,
- "GPIO_SDMMC_1V8_3V_SEL");
- if (ret)
+ ret = gpio_request(sdi0_vsel,
+ "level shifter 1v8-3v select");
+
+ if (ret) {
+ pr_warning("unable to config sdi0 gpios for level shifter.\n");
return;
+ }
- gpio_direction_output(GPIO_SDMMC_1V8_3V_SEL, 0);
- gpio_direction_output(GPIO_SDMMC_EN, 1);
+ /* Select the default 2.9V and enable level shifter */
+ gpio_direction_output(sdi0_vsel, 0);
+ gpio_direction_output(sdi0_en, 1);
+ /* Add the device */
db8500_add_sdi0(&mop500_sdi0_data);
}
+void mop500_sdi_tc35892_init(void)
+{
+ mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
+ sdi0_en = GPIO_SDMMC_EN;
+ sdi0_vsel = GPIO_SDMMC_1V8_3V_SEL;
+ sdi0_configure();
+}
+
/*
* SDI 2 (POP eMMC, not on DB8500ed)
*/
@@ -179,8 +196,15 @@ void __init mop500_sdi_init(void)
/* On-board eMMC */
db8500_add_sdi4(&mop500_sdi4_data);
+ if (machine_is_hrefv60()) {
+ mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
+ sdi0_en = HREFV60_SDMMC_EN_GPIO;
+ sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO;
+ sdi0_configure();
+ }
/*
- * sdi0 will finally be added when the TC35892 initializes and calls
+ * On boards with the TC35892 GPIO expander, sdi0 will finally
+ * be added when the TC35892 initializes and calls
* mop500_sdi_tc35892_init() above.
*/
}
diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c
index 8b6323e229ff..8c979770d872 100644
--- a/arch/arm/mach-ux500/board-mop500-stuib.c
+++ b/arch/arm/mach-ux500/board-mop500-stuib.c
@@ -12,6 +12,7 @@
#include <linux/interrupt.h>
#include <linux/i2c.h>
#include <linux/input/matrix_keypad.h>
+#include <asm/mach-types.h>
#include "board-mop500.h"
@@ -154,7 +155,6 @@ static struct bu21013_platform_device tsc_plat_device = {
.cs_dis = bu21013_gpio_board_exit,
.irq_read_val = bu21013_read_pin_val,
.irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
- .cs_pin = GPIO_BU21013_CS,
.touch_x_max = TOUCH_XMAX,
.touch_y_max = TOUCH_YMAX,
.ext_clk = false,
@@ -167,7 +167,6 @@ static struct bu21013_platform_device tsc_plat2_device = {
.cs_dis = bu21013_gpio_board_exit,
.irq_read_val = bu21013_read_pin_val,
.irq = NOMADIK_GPIO_TO_IRQ(TOUCH_GPIO_PIN),
- .cs_pin = GPIO_BU21013_CS,
.touch_x_max = TOUCH_XMAX,
.touch_y_max = TOUCH_YMAX,
.ext_clk = false,
@@ -189,6 +188,15 @@ static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
void __init mop500_stuib_init(void)
{
+ if (machine_is_hrefv60()) {
+ tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
+ tsc_plat2_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
+ } else {
+ tsc_plat_device.cs_pin = GPIO_BU21013_CS;
+ tsc_plat2_device.cs_pin = GPIO_BU21013_CS;
+
+ }
+
mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
ARRAY_SIZE(mop500_i2c0_devices_stuib));
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 72448e17260f..8790d984cac8 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -202,7 +202,6 @@ static struct gpio_keys_button mop500_gpio_keys[] = {
.desc = "SFH7741 Proximity Sensor",
.type = EV_SW,
.code = SW_FRONT_PROXIMITY,
- .gpio = GPIO_PROX_SENSOR,
.active_low = 0,
.can_disable = 1,
}
@@ -379,8 +378,18 @@ static void __init mop500_uart_init(void)
db8500_add_uart2(&uart2_plat);
}
-static void __init u8500_init_machine(void)
+static void __init mop500_init_machine(void)
{
+ /*
+ * The HREFv60 board removed a GPIO expander and routed
+ * all these GPIO pins to the internal GPIO controller
+ * instead.
+ */
+ if (machine_is_hrefv60())
+ mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
+ else
+ mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
+
u8500_init_devices();
mop500_pins_init();
@@ -407,5 +416,13 @@ MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
- .init_machine = u8500_init_machine,
+ .init_machine = mop500_init_machine,
+MACHINE_END
+
+MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
+ .boot_params = 0x100,
+ .map_io = u8500_map_io,
+ .init_irq = ux500_init_irq,
+ .timer = &ux500_timer,
+ .init_machine = mop500_init_machine,
MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index 48abca77335c..56722f4be71b 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -7,9 +7,21 @@
#ifndef __BOARD_MOP500_H
#define __BOARD_MOP500_H
-#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x))
+/* HREFv60-specific GPIO assignments, this board has no GPIO expander */
+#define HREFV60_TOUCH_RST_GPIO 143
+#define HREFV60_PROX_SENSE_GPIO 217
+#define HREFV60_HAL_SW_GPIO 145
+#define HREFV60_SDMMC_EN_GPIO 169
+#define HREFV60_SDMMC_1V8_3V_GPIO 5
+#define HREFV60_SDMMC_CD_GPIO 95
+#define HREFV60_ACCEL_INT1_GPIO 82
+#define HREFV60_ACCEL_INT2_GPIO 83
+#define HREFV60_MAGNET_DRDY_GPIO 32
+#define HREFV60_DISP1_RST_GPIO 65
+#define HREFV60_DISP2_RST_GPIO 66
/* GPIOs on the TC35892 expander */
+#define MOP500_EGPIO(x) (NOMADIK_NR_GPIO + (x))
#define GPIO_SDMMC_CD MOP500_EGPIO(3)
#define GPIO_PROX_SENSOR MOP500_EGPIO(7)
#define GPIO_BU21013_CS MOP500_EGPIO(13)
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
index 9a6614c6808e..ab0fe1432fae 100644
--- a/arch/arm/mach-ux500/include/mach/uncompress.h
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -50,7 +50,11 @@ static void flush(void)
static inline void arch_decomp_setup(void)
{
- if (machine_is_u8500())
+ /* Check in run time if we run on an U8500 or U5500 */
+ if (machine_is_u8500() ||
+ machine_is_svp8500v1() ||
+ machine_is_svp8500v2() ||
+ machine_is_hrefv60())
ux500_uart_base = U8500_UART2_BASE;
else if (machine_is_u5500())
ux500_uart_base = U5500_UART0_BASE;