ARM: ux500: move MMC/SD/SDIO pin control to the device tree

This moves the static, device-tied pin control configuration
out of the board file board-mop500-pins.c and into the device
tree. Add entries for SDI1 and SDI2 on the Snowball so that the
WLAN pins on SDI1 can be used further on, and the unused pins
on SDI2 can be put to sleep.

Cc: Lee Jones <lee.jones@linaro.org>
Cc: Patrice Chotard <patrice.chotard@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 0 insertions, 107 deletions

diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c
index 1f1e53972063..0f9a0776cf90 100644
--- a/arch/arm/mach-ux500/board-mop500-pins.c
+++ b/arch/arm/mach-ux500/board-mop500-pins.c
@@ -63,12 +63,6 @@ BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH|
 	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
 BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP|
 	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED);
-BIAS(out_lo_wkup_pdis, PIN_SLPM_OUTPUT_LOW|
-	PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED);
-BIAS(in_wkup_pdis_en, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|
-	PIN_SLPM_PDIS_ENABLED);
-BIAS(in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|
-	PIN_SLPM_PDIS_DISABLED);
 
 /* We use these to define hog settings that are always done on boot */
 #define DB8500_MUX_HOG(group,func) \
@@ -389,99 +383,6 @@ static struct pinctrl_map __initdata mop500_family_pinmap[] = {
 	DB8500_PIN("GPIO69_E2", in_pu, "0-0070"),
 	/* LCD VSI1 sleep state */
 	DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"),
-	/* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */
-	DB8500_MUX("mc0_a_1", "mc0", "sdi0"),
-	DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */
-	DB8500_PIN("GPIO19_AC1", out_hi, "sdi0"), /* DAT0DIR */
-	DB8500_PIN("GPIO20_AB4", out_hi, "sdi0"), /* DAT2DIR */
-	DB8500_PIN("GPIO22_AA3", in_nopull, "sdi0"), /* FBCLK */
-	DB8500_PIN("GPIO23_AA4", out_lo, "sdi0"), /* CLK */
-	DB8500_PIN("GPIO24_AB2", in_pu, "sdi0"), /* CMD */
-	DB8500_PIN("GPIO25_Y4", in_pu, "sdi0"), /* DAT0 */
-	DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */
-	DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */
-	DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */
-	/* SDI0 sleep state */
-	DB8500_PIN_SLEEP("GPIO18_AC2", slpm_out_hi_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO19_AC1", slpm_out_hi_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO20_AB4", slpm_out_hi_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO22_AA3", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO23_AA4", slpm_out_lo_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO24_AB2", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO25_Y4", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO26_Y2", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO27_AA2", slpm_in_wkup_pdis, "sdi0"),
-	DB8500_PIN_SLEEP("GPIO28_AA1", slpm_in_wkup_pdis, "sdi0"),
-
-	/* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */
-	DB8500_MUX("mc1_a_1", "mc1", "sdi1"),
-	DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */
-	DB8500_PIN("GPIO209_AG15", in_nopull, "sdi1"), /* FBCLK */
-	DB8500_PIN("GPIO210_AJ15", in_pu, "sdi1"), /* CMD */
-	DB8500_PIN("GPIO211_AG14", in_pu, "sdi1"), /* DAT0 */
-	DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */
-	DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */
-	DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */
-	/* SDI1 sleep state */
-	DB8500_PIN_SLEEP("GPIO208_AH16", slpm_out_lo_wkup_pdis, "sdi1"), /* CLK */
-	DB8500_PIN_SLEEP("GPIO209_AG15", slpm_in_wkup_pdis, "sdi1"), /* FBCLK */
-	DB8500_PIN_SLEEP("GPIO210_AJ15", slpm_in_wkup_pdis, "sdi1"), /* CMD */
-	DB8500_PIN_SLEEP("GPIO211_AG14", slpm_in_wkup_pdis, "sdi1"), /* DAT0 */
-	DB8500_PIN_SLEEP("GPIO212_AF13", slpm_in_wkup_pdis, "sdi1"), /* DAT1 */
-	DB8500_PIN_SLEEP("GPIO213_AG13", slpm_in_wkup_pdis, "sdi1"), /* DAT2 */
-	DB8500_PIN_SLEEP("GPIO214_AH15", slpm_in_wkup_pdis, "sdi1"), /* DAT3 */
-
-	/* Mux in SDI2 (here called MC2) used for for PoP eMMC */
-	DB8500_MUX("mc2_a_1", "mc2", "sdi2"),
-	DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */
-	DB8500_PIN("GPIO129_B4", in_pu, "sdi2"), /* CMD */
-	DB8500_PIN("GPIO130_C8", in_nopull, "sdi2"), /* FBCLK */
-	DB8500_PIN("GPIO131_A12", in_pu, "sdi2"), /* DAT0 */
-	DB8500_PIN("GPIO132_C10", in_pu, "sdi2"), /* DAT1 */
-	DB8500_PIN("GPIO133_B10", in_pu, "sdi2"), /* DAT2 */
-	DB8500_PIN("GPIO134_B9", in_pu, "sdi2"), /* DAT3 */
-	DB8500_PIN("GPIO135_A9", in_pu, "sdi2"), /* DAT4 */
-	DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */
-	DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */
-	DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */
-	/* SDI2 sleep state */
-	DB8500_PIN_SLEEP("GPIO128_A5", out_lo_wkup_pdis, "sdi2"), /* CLK */
-	DB8500_PIN_SLEEP("GPIO129_B4", in_wkup_pdis_en, "sdi2"), /* CMD */
-	DB8500_PIN_SLEEP("GPIO130_C8", in_wkup_pdis_en, "sdi2"), /* FBCLK */
-	DB8500_PIN_SLEEP("GPIO131_A12", in_wkup_pdis, "sdi2"), /* DAT0 */
-	DB8500_PIN_SLEEP("GPIO132_C10", in_wkup_pdis, "sdi2"), /* DAT1 */
-	DB8500_PIN_SLEEP("GPIO133_B10", in_wkup_pdis, "sdi2"), /* DAT2 */
-	DB8500_PIN_SLEEP("GPIO134_B9", in_wkup_pdis, "sdi2"), /* DAT3 */
-	DB8500_PIN_SLEEP("GPIO135_A9", in_wkup_pdis, "sdi2"), /* DAT4 */
-	DB8500_PIN_SLEEP("GPIO136_C7", in_wkup_pdis, "sdi2"), /* DAT5 */
-	DB8500_PIN_SLEEP("GPIO137_A7", in_wkup_pdis, "sdi2"), /* DAT6 */
-	DB8500_PIN_SLEEP("GPIO138_C5", in_wkup_pdis, "sdi2"), /* DAT7 */
-
-	/* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */
-	DB8500_MUX("mc4_a_1", "mc4", "sdi4"),
-	DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */
-	DB8500_PIN("GPIO198_AG25", in_pu, "sdi4"), /* DAT2 */
-	DB8500_PIN("GPIO199_AH23", in_pu, "sdi4"), /* DAT1 */
-	DB8500_PIN("GPIO200_AH26", in_pu, "sdi4"), /* DAT0 */
-	DB8500_PIN("GPIO201_AF24", in_pu, "sdi4"), /* CMD */
-	DB8500_PIN("GPIO202_AF25", in_nopull, "sdi4"), /* FBCLK */
-	DB8500_PIN("GPIO203_AE23", out_lo, "sdi4"), /* CLK */
-	DB8500_PIN("GPIO204_AF23", in_pu, "sdi4"), /* DAT7 */
-	DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */
-	DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */
-	DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */
-	/*SDI4 sleep state */
-	DB8500_PIN_SLEEP("GPIO197_AH24", slpm_in_wkup_pdis, "sdi4"), /* DAT3 */
-	DB8500_PIN_SLEEP("GPIO198_AG25", slpm_in_wkup_pdis, "sdi4"), /* DAT2 */
-	DB8500_PIN_SLEEP("GPIO199_AH23", slpm_in_wkup_pdis, "sdi4"), /* DAT1 */
-	DB8500_PIN_SLEEP("GPIO200_AH26", slpm_in_wkup_pdis, "sdi4"), /* DAT0 */
-	DB8500_PIN_SLEEP("GPIO201_AF24", slpm_in_wkup_pdis, "sdi4"), /* CMD */
-	DB8500_PIN_SLEEP("GPIO202_AF25", slpm_in_wkup_pdis, "sdi4"), /* FBCLK */
-	DB8500_PIN_SLEEP("GPIO203_AE23", slpm_out_lo_wkup_pdis, "sdi4"), /* CLK */
-	DB8500_PIN_SLEEP("GPIO204_AF23", slpm_in_wkup_pdis, "sdi4"), /* DAT7 */
-	DB8500_PIN_SLEEP("GPIO205_AG23", slpm_in_wkup_pdis, "sdi4"), /* DAT6 */
-	DB8500_PIN_SLEEP("GPIO206_AG24", slpm_in_wkup_pdis, "sdi4"), /* DAT5 */
-	DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */
 
 	/* Mux in USB pins, drive STP high */
 	/* USB default state */
@@ -795,10 +696,6 @@ static struct pinctrl_map __initdata mop500_pinmap[] = {
 	DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */
 	DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */
 	DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */
-
-	/* Mux in and drive the SDI0 DAT31DIR line high at runtime */
-	DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"),
-	DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"),
 };
 
 /*
@@ -888,8 +785,6 @@ static struct pinctrl_map __initdata hrefv60_pinmap[] = {
 	/* Accelerometer interrupt lines */
 	DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */
 	DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */
-	/* SD card detect GPIO pin */
-	DB8500_PIN_HOG("GPIO95_E8", gpio_in_pu),
 	/*
 	 * Runtime stuff
 	 * Pull up/down of some sensor GPIO pins, for proximity, HAL sensor
@@ -925,8 +820,6 @@ static struct pinctrl_map __initdata snowball_pinmap[] = {
 	/* Mux in SSP0 connected to AB8500, pull down RXD pin */
 	DB8500_MUX_HOG("ssp0_a_1", "ssp0"),
 	DB8500_PIN_HOG("GPIO145_C13", pd),
-	/* Always drive the MC0 DAT31DIR line high on these boards */
-	DB8500_PIN_HOG("GPIO21_AB3", out_hi),
 	/* Mux in "SM" which is used for the SMSC911x Ethernet adapter */
 	DB8500_MUX_HOG("sm_b_1", "sm"),
 	/* User LED */