Merge tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC DT updates from Olof Johansson:
 "Most of this branch consists of updates, additions and general churn
  of the device tree source files in the kernel (arch/arm/boot/dts).
  Besides that, there are a few things to point out:

   - Lots of platform conversion on OMAP2+, with removal of old board
     files for various platforms.
   - Final conversion of a bunch of ux500 (ST-Ericsson) platforms as
     well
   - Some updates to pinctrl and other subsystems.  Most of these are
     for DT-enablement of the various platforms and acks have been
     collected"

* tag 'dt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (385 commits)
  ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts
  ARM: dts: bcm: Add missing UARTs for bcm11351 (bcm281xx)
  ARM: dts: bcm281xx: Add card detect GPIO
  ARM: dts: rename ARCH_BCM to ARCH_BCM_MOBILE (dt)
  ARM: bcm281xx: Add device node for the GPIO controller
  ARM: mvebu: Add Netgear ReadyNAS 104 board
  ARM: tegra: fix Tegra114 IOMMU register address
  ARM: kirkwood: add support for OpenBlocks A7 platform
  ARM: dts: omap4-panda: add DPI pinmuxing
  ARM: dts: AM33xx: Add RNG node
  ARM: dts: AM33XX: Add hwspinlock node
  ARM: dts: OMAP5: Add hwspinlock node
  ARM: dts: OMAP4: Add hwspinlock node
  ARM: dts: use 'status' property for PCIe nodes
  ARM: dts: sirf: add missed address-cells and size-cells for prima2 I2C
  ARM: dts: sirf: add missed cell, cs and dma channel for SPI nodes
  ARM: dts: sirf: add missed graphics2d iobg in atlas6 dts
  ARM: dts: sirf: add missed chhifbg node in prima2 and atlas6 dts
  ARM: dts: sirf: add missed memcontrol-monitor node in prima2 and atlas6 dts
  ARM: mvebu: Add the core-divider clock to Armada 370/XP
  ...

18 files changed, 23 insertions, 1785 deletions

diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
index fe1f3e26b88b..616b96e86ad4 100644
--- a/arch/arm/mach-ux500/Makefile
+++ b/arch/arm/mach-ux500/Makefile
@@ -2,14 +2,11 @@
 # Makefile for the linux kernel, U8500 machine.
 #
 
-obj-y				:= cpu.o devices.o devices-common.o \
-				   id.o usb.o timer.o pm.o
+obj-y				:= cpu.o devices.o id.o timer.o pm.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_UX500_SOC_DB8500)	+= cpu-db8500.o devices-db8500.o
 obj-$(CONFIG_MACH_MOP500)	+= board-mop500.o board-mop500-sdi.o \
 				board-mop500-regulators.o \
-				board-mop500-uib.o board-mop500-stuib.o \
-				board-mop500-u8500uib.o \
 				board-mop500-pins.o \
 				board-mop500-audio.o
 obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o
diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c
index ec0807247e60..154e15f59702 100644
--- a/arch/arm/mach-ux500/board-mop500-audio.c
+++ b/arch/arm/mach-ux500/board-mop500-audio.c
@@ -68,40 +68,6 @@ static struct stedma40_chan_cfg msp2_dma_tx = {
 	.phy_channel = 1,
 };
 
-static struct platform_device *db8500_add_msp_i2s(struct device *parent,
-			int id,
-			resource_size_t base, int irq,
-			struct msp_i2s_platform_data *pdata)
-{
-	struct platform_device *pdev;
-	struct resource res[] = {
-		DEFINE_RES_MEM(base, SZ_4K),
-		DEFINE_RES_IRQ(irq),
-	};
-
-	pr_info("Register platform-device 'ux500-msp-i2s', id %d, irq %d\n",
-		id, irq);
-	pdev = platform_device_register_resndata(parent, "ux500-msp-i2s", id,
-						res, ARRAY_SIZE(res),
-						pdata, sizeof(*pdata));
-	if (!pdev) {
-		pr_err("Failed to register platform-device 'ux500-msp-i2s.%d'!\n",
-			id);
-		return NULL;
-	}
-
-	return pdev;
-}
-
-/* Platform device for ASoC MOP500 machine */
-static struct platform_device snd_soc_mop500 = {
-	.name = "snd-soc-mop500",
-	.id = 0,
-	.dev = {
-		.platform_data = NULL,
-	},
-};
-
 struct msp_i2s_platform_data msp2_platform_data = {
 	.id = MSP_I2S_2,
 	.msp_i2s_dma_rx = &msp2_dma_rx,
@@ -113,19 +79,3 @@ struct msp_i2s_platform_data msp3_platform_data = {
 	.msp_i2s_dma_rx	= &msp1_dma_rx,
 	.msp_i2s_dma_tx	= NULL,
 };
-
-void mop500_audio_init(struct device *parent)
-{
-	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
-	platform_device_register(&snd_soc_mop500);
-
-	pr_info("Initialize MSP I2S-devices.\n");
-	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
-			   &msp0_platform_data);
-	db8500_add_msp_i2s(parent, 1, U8500_MSP1_BASE, IRQ_DB8500_MSP1,
-			   &msp1_platform_data);
-	db8500_add_msp_i2s(parent, 2, U8500_MSP2_BASE, IRQ_DB8500_MSP2,
-			   &msp2_platform_data);
-	db8500_add_msp_i2s(parent, 3, U8500_MSP3_BASE, IRQ_DB8500_MSP1,
-			   &msp3_platform_data);
-}
diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index b3e61a38e5c8..26600a1c5319 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -65,18 +65,6 @@ struct mmci_platform_data mop500_sdi0_data = {
 #endif
 };
 
-static void sdi0_configure(struct device *parent)
-{
-	/* Add the device, force v2 to subrevision 1 */
-	db8500_add_sdi0(parent, &mop500_sdi0_data, U8500_SDI_V2_PERIPHID);
-}
-
-void mop500_sdi_tc35892_init(struct device *parent)
-{
-	mop500_sdi0_data.gpio_cd = GPIO_SDMMC_CD;
-	sdi0_configure(parent);
-}
-
 /*
  * SDI1 (SDIO WLAN)
  */
@@ -178,42 +166,3 @@ struct mmci_platform_data mop500_sdi4_data = {
 	.dma_tx_param	= &mop500_sdi4_dma_cfg_tx,
 #endif
 };
-
-void __init mop500_sdi_init(struct device *parent)
-{
-	/* PoP:ed eMMC */
-	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-
-	/*
-	 * On boards with the TC35892 GPIO expander, sdi0 will finally
-	 * be added when the TC35892 initializes and calls
-	 * mop500_sdi_tc35892_init() above.
-	 */
-}
-
-void __init snowball_sdi_init(struct device *parent)
-{
-	/* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */
-	mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED;
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-	/* External Micro SD slot */
-	mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO;
-	mop500_sdi0_data.cd_invert = true;
-	sdi0_configure(parent);
-}
-
-void __init hrefv60_sdi_init(struct device *parent)
-{
-	/* PoP:ed eMMC */
-	db8500_add_sdi2(parent, &mop500_sdi2_data, U8500_SDI_V2_PERIPHID);
-	/* On-board eMMC */
-	db8500_add_sdi4(parent, &mop500_sdi4_data, U8500_SDI_V2_PERIPHID);
-	/* External Micro SD slot */
-	mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO;
-	sdi0_configure(parent);
-	/* WLAN SDIO channel */
-	db8500_add_sdi1(parent, &mop500_sdi1_data, U8500_SDI_V2_PERIPHID);
-}
diff --git a/arch/arm/mach-ux500/board-mop500-stuib.c b/arch/arm/mach-ux500/board-mop500-stuib.c
deleted file mode 100644
index 7e1f294f0434..000000000000
--- a/arch/arm/mach-ux500/board-mop500-stuib.c
+++ /dev/null
@@ -1,120 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/mfd/stmpe.h>
-#include <linux/input/bu21013.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/i2c.h>
-#include <linux/input/matrix_keypad.h>
-#include <asm/mach-types.h>
-
-#include "board-mop500.h"
-
-/* STMPE/SKE keypad use this key layout */
-static const unsigned int mop500_keymap[] = {
-	KEY(2, 5, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(3, 5, KEY_VOLUMEDOWN),
-	KEY(1, 3, KEY_3),
-	KEY(5, 2, KEY_RIGHT),
-	KEY(5, 0, KEY_9),
-
-	KEY(0, 5, KEY_MENU),
-	KEY(7, 6, KEY_ENTER),
-	KEY(4, 5, KEY_0),
-	KEY(6, 7, KEY_2),
-	KEY(3, 4, KEY_UP),
-	KEY(3, 3, KEY_DOWN),
-
-	KEY(6, 4, KEY_SEND),
-	KEY(6, 2, KEY_BACK),
-	KEY(4, 2, KEY_VOLUMEUP),
-	KEY(5, 5, KEY_1),
-	KEY(4, 3, KEY_LEFT),
-	KEY(3, 2, KEY_7),
-};
-
-static const struct matrix_keymap_data mop500_keymap_data = {
-	.keymap		= mop500_keymap,
-	.keymap_size    = ARRAY_SIZE(mop500_keymap),
-};
-/*
- * STMPE1601
- */
-static struct stmpe_keypad_platform_data stmpe1601_keypad_data = {
-	.debounce_ms    = 64,
-	.scan_count     = 8,
-	.no_autorepeat  = true,
-	.keymap_data    = &mop500_keymap_data,
-};
-
-static struct stmpe_platform_data stmpe1601_data = {
-	.id		= 1,
-	.blocks		= STMPE_BLOCK_KEYPAD,
-	.irq_trigger    = IRQF_TRIGGER_FALLING,
-	.irq_base       = MOP500_STMPE1601_IRQ(0),
-	.keypad		= &stmpe1601_keypad_data,
-	.autosleep      = true,
-	.autosleep_timeout = 1024,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices_stuib[] = {
-	{
-		I2C_BOARD_INFO("stmpe1601", 0x40),
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.platform_data = &stmpe1601_data,
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-/*
- * BU21013 ROHM touchscreen interface on the STUIBs
- */
-
-#define TOUCH_GPIO_PIN  84
-
-#define TOUCH_XMAX	384
-#define TOUCH_YMAX	704
-
-#define PRCMU_CLOCK_OCR		0x1CC
-#define TSC_EXT_CLOCK_9_6MHZ	0x840000
-
-static struct bu21013_platform_device tsc_plat_device = {
-	.touch_pin = TOUCH_GPIO_PIN,
-	.touch_x_max = TOUCH_XMAX,
-	.touch_y_max = TOUCH_YMAX,
-	.ext_clk = false,
-	.x_flip = false,
-	.y_flip = true,
-};
-
-static struct i2c_board_info __initdata u8500_i2c3_devices_stuib[] = {
-	{
-		I2C_BOARD_INFO("bu21013_tp", 0x5C),
-		.platform_data = &tsc_plat_device,
-	},
-	{
-		I2C_BOARD_INFO("bu21013_tp", 0x5D),
-		.platform_data = &tsc_plat_device,
-	},
-};
-
-void __init mop500_stuib_init(void)
-{
-	if (machine_is_hrefv60())
-		tsc_plat_device.cs_pin = HREFV60_TOUCH_RST_GPIO;
-	else
-		tsc_plat_device.cs_pin = GPIO_BU21013_CS;
-
-	mop500_uib_i2c_add(0, mop500_i2c0_devices_stuib,
-			ARRAY_SIZE(mop500_i2c0_devices_stuib));
-
-	mop500_uib_i2c_add(3, u8500_i2c3_devices_stuib,
-			ARRAY_SIZE(u8500_i2c3_devices_stuib));
-}
diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c
deleted file mode 100644
index d397c19570af..000000000000
--- a/arch/arm/mach-ux500/board-mop500-u8500uib.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Board data for the U8500 UIB, also known as the New UIB
- * License terms: GNU General Public License (GPL), version 2
- */
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/mfd/tc3589x.h>
-#include <linux/input/matrix_keypad.h>
-
-#include "irqs.h"
-
-#include "board-mop500.h"
-
-static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = {
-	{
-		I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B),
-		.irq = NOMADIK_GPIO_TO_IRQ(84),
-	},
-};
-
-/*
- * TC35893
- */
-static const unsigned int u8500_keymap[] = {
-	KEY(3, 1, KEY_END),
-	KEY(4, 1, KEY_POWER),
-	KEY(6, 4, KEY_VOLUMEDOWN),
-	KEY(4, 2, KEY_EMAIL),
-	KEY(3, 3, KEY_RIGHT),
-	KEY(2, 5, KEY_BACKSPACE),
-
-	KEY(6, 7, KEY_MENU),
-	KEY(5, 0, KEY_ENTER),
-	KEY(4, 3, KEY_0),
-	KEY(3, 4, KEY_DOT),
-	KEY(5, 2, KEY_UP),
-	KEY(3, 5, KEY_DOWN),
-
-	KEY(4, 5, KEY_SEND),
-	KEY(0, 5, KEY_BACK),
-	KEY(6, 2, KEY_VOLUMEUP),
-	KEY(1, 3, KEY_SPACE),
-	KEY(7, 6, KEY_LEFT),
-	KEY(5, 5, KEY_SEARCH),
-};
-
-static struct matrix_keymap_data u8500_keymap_data = {
-	.keymap		= u8500_keymap,
-	.keymap_size    = ARRAY_SIZE(u8500_keymap),
-};
-
-static struct tc3589x_keypad_platform_data tc35893_data = {
-	.krow = TC_KPD_ROWS,
-	.kcol = TC_KPD_COLUMNS,
-	.debounce_period = TC_KPD_DEBOUNCE_PERIOD,
-	.settle_time = TC_KPD_SETTLE_TIME,
-	.irqtype = IRQF_TRIGGER_FALLING,
-	.enable_wakeup = true,
-	.keymap_data    = &u8500_keymap_data,
-	.no_autorepeat  = true,
-};
-
-static struct tc3589x_platform_data tc3589x_keypad_data = {
-	.block = TC3589x_BLOCK_KEYPAD,
-	.keypad = &tc35893_data,
-	.irq_base = MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct i2c_board_info __initdata mop500_i2c0_devices_u8500[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x44),
-		.platform_data = &tc3589x_keypad_data,
-		.irq = NOMADIK_GPIO_TO_IRQ(218),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-
-void __init mop500_u8500uib_init(void)
-{
-	mop500_uib_i2c_add(3, mop500_i2c3_devices_u8500,
-			ARRAY_SIZE(mop500_i2c3_devices_u8500));
-
-	mop500_uib_i2c_add(0, mop500_i2c0_devices_u8500,
-			ARRAY_SIZE(mop500_i2c0_devices_u8500));
-
-}
diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c
deleted file mode 100644
index bdaa422da028..000000000000
--- a/arch/arm/mach-ux500/board-mop500-uib.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2
- */
-
-#define pr_fmt(fmt)	"mop500-uib: " fmt
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-
-#include "board-mop500.h"
-#include "id.h"
-
-enum mop500_uib {
-	STUIB,
-	U8500UIB,
-};
-
-struct uib {
-	const char *name;
-	const char *option;
-	void (*init)(void);
-};
-
-static struct uib __initdata mop500_uibs[] = {
-	[STUIB] = {
-		.name	= "ST-UIB",
-		.option	= "stuib",
-		.init	= mop500_stuib_init,
-	},
-	[U8500UIB] = {
-		.name	= "U8500-UIB",
-		.option	= "u8500uib",
-		.init	= mop500_u8500uib_init,
-	},
-};
-
-static struct uib *mop500_uib;
-
-static int __init mop500_uib_setup(char *str)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(mop500_uibs); i++) {
-		struct uib *uib = &mop500_uibs[i];
-
-		if (!strcmp(str, uib->option)) {
-			mop500_uib = uib;
-			break;
-		}
-	}
-
-	if (i == ARRAY_SIZE(mop500_uibs))
-		pr_err("invalid uib= option (%s)\n", str);
-
-	return 1;
-}
-__setup("uib=", mop500_uib_setup);
-
-/*
- * The UIBs are detected after the I2C host controllers are registered, so
- * i2c_register_board_info() can't be used.
- */
-void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
-		unsigned n)
-{
-	struct i2c_adapter *adap;
-	struct i2c_client *client;
-	int i;
-
-	adap = i2c_get_adapter(busnum);
-	if (!adap) {
-		pr_err("failed to get adapter i2c%d\n", busnum);
-		return;
-	}
-
-	for (i = 0; i < n; i++) {
-		client = i2c_new_device(adap, &info[i]);
-		if (!client)
-			pr_err("failed to register %s to i2c%d\n",
-					info[i].type, busnum);
-	}
-
-	i2c_put_adapter(adap);
-}
-
-static void __init __mop500_uib_init(struct uib *uib, const char *why)
-{
-	pr_info("%s (%s)\n", uib->name, why);
-	uib->init();
-}
-
-/*
- * Detect the UIB attached based on the presence or absence of i2c devices.
- */
-int __init mop500_uib_init(void)
-{
-	struct uib *uib = mop500_uib;
-	struct i2c_adapter *i2c0;
-	int ret;
-
-	if (!cpu_is_u8500_family())
-		return -ENODEV;
-
-	if (uib) {
-		__mop500_uib_init(uib, "from uib= boot argument");
-		return 0;
-	}
-
-	i2c0 = i2c_get_adapter(0);
-	if (!i2c0) {
-		__mop500_uib_init(&mop500_uibs[STUIB],
-				"fallback, could not get i2c0");
-		return -ENODEV;
-	}
-
-	/* U8500-UIB has the TC35893 at 0x44 on I2C0, the ST-UIB doesn't. */
-	ret = i2c_smbus_xfer(i2c0, 0x44, 0, I2C_SMBUS_WRITE, 0,
-			I2C_SMBUS_QUICK, NULL);
-	i2c_put_adapter(i2c0);
-
-	if (ret == 0)
-		uib = &mop500_uibs[U8500UIB];
-	else
-		uib = &mop500_uibs[STUIB];
-
-	__mop500_uib_init(uib, "detected");
-
-	return 0;
-}
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index ad0806eff762..514d40b625a4 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -14,27 +14,16 @@
 #include <linux/platform_device.h>
 #include <linux/clk.h>
 #include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-nomadik.h>
 #include <linux/platform_data/db8500_thermal.h>
-#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
-#include <linux/amba/serial.h>
-#include <linux/spi/spi.h>
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/regulator/ab8500.h>
 #include <linux/regulator/fixed.h>
 #include <linux/regulator/driver.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/mfd/tc3589x.h>
 #include <linux/mfd/tps6105x.h>
-#include <linux/mfd/abx500/ab8500-gpio.h>
-#include <linux/mfd/abx500/ab8500-codec.h>
 #include <linux/platform_data/leds-lp55xx.h>
 #include <linux/input.h>
-#include <linux/smsc911x.h>
-#include <linux/gpio_keys.h>
 #include <linux/delay.h>
 #include <linux/leds.h>
 #include <linux/pinctrl/consumer.h>
@@ -46,7 +35,6 @@
 #include "setup.h"
 #include "devices.h"
 #include "irqs.h"
-#include <linux/platform_data/crypto-ux500.h>
 
 #include "ste-dma40-db8500.h"
 #include "db8500-regs.h"
@@ -54,401 +42,9 @@
 #include "board-mop500.h"
 #include "board-mop500-regulators.h"
 
-static struct gpio_led snowball_led_array[] = {
-	{
-		.name = "user_led",
-		.default_trigger = "heartbeat",
-		.gpio = 142,
-	},
-};
-
-static struct gpio_led_platform_data snowball_led_data = {
-	.leds = snowball_led_array,
-	.num_leds = ARRAY_SIZE(snowball_led_array),
-};
-
-static struct platform_device snowball_led_dev = {
-	.name = "leds-gpio",
-	.dev = {
-		.platform_data = &snowball_led_data,
-	},
-};
-
-static struct fixed_voltage_config snowball_gpio_en_3v3_data = {
-       .supply_name            = "EN-3V3",
-       .gpio                   = SNOWBALL_EN_3V3_ETH_GPIO,
-       .microvolts             = 3300000,
-       .enable_high            = 1,
-       .init_data              = &gpio_en_3v3_regulator,
-       .startup_delay          = 5000, /* 1200us */
-};
-
-static struct platform_device snowball_gpio_en_3v3_regulator_dev = {
-       .name   = "reg-fixed-voltage",
-       .id     = 1,
-       .dev    = {
-               .platform_data  = &snowball_gpio_en_3v3_data,
-       },
-};
-
-/* Dynamically populated. */
-static struct gpio sdi0_reg_gpios[] = {
-	{ 0, GPIOF_OUT_INIT_LOW, "mmci_vsel" },
-};
-
-static struct gpio_regulator_state sdi0_reg_states[] = {
-	{ .value = 2900000, .gpios = (0 << 0) },
-	{ .value = 1800000, .gpios = (1 << 0) },
-};
-
-static struct gpio_regulator_config sdi0_reg_info = {
-	.supply_name		= "ext-mmc-level-shifter",
-	.gpios			= sdi0_reg_gpios,
-	.nr_gpios		= ARRAY_SIZE(sdi0_reg_gpios),
-	.states			= sdi0_reg_states,
-	.nr_states		= ARRAY_SIZE(sdi0_reg_states),
-	.type			= REGULATOR_VOLTAGE,
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &sdi0_reg_init_data,
-	.startup_delay		= 100,
-};
-
-static struct platform_device sdi0_regulator = {
-	.name = "gpio-regulator",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &sdi0_reg_info,
-	},
-};
-
-static struct abx500_gpio_platform_data ab8500_gpio_pdata = {
-	.gpio_base		= MOP500_AB8500_PIN_GPIO(1),
-};
-
-/* ab8500-codec */
-static struct ab8500_codec_platform_data ab8500_codec_pdata = {
-	.amics =  {
-		.mic1_type = AMIC_TYPE_DIFFERENTIAL,
-		.mic2_type = AMIC_TYPE_DIFFERENTIAL,
-		.mic1a_micbias = AMIC_MICBIAS_VAMIC1,
-		.mic1b_micbias = AMIC_MICBIAS_VAMIC1,
-		.mic2_micbias = AMIC_MICBIAS_VAMIC2
-	},
-	.ear_cmv = EAR_CMV_0_95V
-};
-
-static struct gpio_keys_button snowball_key_array[] = {
-	{
-		.gpio           = 32,
-		.type           = EV_KEY,
-		.code           = KEY_1,
-		.desc           = "userpb",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 151,
-		.type           = EV_KEY,
-		.code           = KEY_2,
-		.desc           = "extkb1",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 152,
-		.type           = EV_KEY,
-		.code           = KEY_3,
-		.desc           = "extkb2",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 161,
-		.type           = EV_KEY,
-		.code           = KEY_4,
-		.desc           = "extkb3",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-	{
-		.gpio           = 162,
-		.type           = EV_KEY,
-		.code           = KEY_5,
-		.desc           = "extkb4",
-		.active_low     = 1,
-		.debounce_interval = 50,
-		.wakeup         = 1,
-	},
-};
-
-static struct gpio_keys_platform_data snowball_key_data = {
-	.buttons        = snowball_key_array,
-	.nbuttons       = ARRAY_SIZE(snowball_key_array),
-};
-
-static struct platform_device snowball_key_dev = {
-	.name           = "gpio-keys",
-	.id             = -1,
-	.dev            = {
-		.platform_data  = &snowball_key_data,
-	}
-};
-
-static struct smsc911x_platform_config snowball_sbnet_cfg = {
-	.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
-	.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
-	.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
-	.shift = 1,
-};
-
-static struct resource sbnet_res[] = {
-	{
-		.name = "smsc911x-memory",
-		.start = (0x5000 << 16),
-		.end  =  (0x5000 << 16) + 0xffff,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = NOMADIK_GPIO_TO_IRQ(140),
-		.end = NOMADIK_GPIO_TO_IRQ(140),
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device snowball_sbnet_dev = {
-	.name           = "smsc911x",
-	.num_resources  = ARRAY_SIZE(sbnet_res),
-	.resource       = sbnet_res,
-	.dev            = {
-		.platform_data = &snowball_sbnet_cfg,
-	},
-};
-
 struct ab8500_platform_data ab8500_platdata = {
 	.irq_base	= MOP500_AB8500_IRQ_BASE,
 	.regulator	= &ab8500_regulator_plat_data,
-	.gpio		= &ab8500_gpio_pdata,
-	.codec		= &ab8500_codec_pdata,
-};
-
-static struct platform_device u8500_cpufreq_cooling_device = {
-	.name           = "db8500-cpufreq-cooling",
-};
-
-/*
- * TPS61052
- */
-
-static struct tps6105x_platform_data mop500_tps61052_data = {
-	.mode = TPS6105X_MODE_VOLTAGE,
-	.regulator_data = &tps61052_regulator,
-};
-
-/*
- * TC35892
- */
-
-static void mop500_tc35892_init(struct tc3589x *tc3589x, unsigned int base)
-{
-	struct device *parent = NULL;
-#if 0
-	/* FIXME: Is the sdi actually part of tc3589x? */
-	parent = tc3589x->dev;
-#endif
-	mop500_sdi_tc35892_init(parent);
-}
-
-static struct tc3589x_gpio_platform_data mop500_tc35892_gpio_data = {
-	.gpio_base	= MOP500_EGPIO(0),
-	.setup		= mop500_tc35892_init,
-};
-
-static struct tc3589x_platform_data mop500_tc35892_data = {
-	.block		= TC3589x_BLOCK_GPIO,
-	.gpio		= &mop500_tc35892_gpio_data,
-	.irq_base	= MOP500_EGPIO_IRQ_BASE,
-};
-
-static struct lp55xx_led_config lp5521_pri_led[] = {
-       [0] = {
-	       .chan_nr = 0,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [1] = {
-	       .chan_nr = 1,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [2] = {
-	       .chan_nr = 2,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-};
-
-static struct lp55xx_platform_data __initdata lp5521_pri_data = {
-       .label = "lp5521_pri",
-       .led_config     = &lp5521_pri_led[0],
-       .num_channels   = 3,
-       .clock_mode     = LP55XX_CLOCK_EXT,
-};
-
-static struct lp55xx_led_config lp5521_sec_led[] = {
-       [0] = {
-	       .chan_nr = 0,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [1] = {
-	       .chan_nr = 1,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-       [2] = {
-	       .chan_nr = 2,
-	       .led_current = 0x2f,
-	       .max_current = 0x5f,
-       },
-};
-
-static struct lp55xx_platform_data __initdata lp5521_sec_data = {
-       .label = "lp5521_sec",
-       .led_config     = &lp5521_sec_led[0],
-       .num_channels   = 3,
-       .clock_mode     = LP55XX_CLOCK_EXT,
-};
-
-/* I2C0 devices only available on the first HREF/MOP500 */
-static struct i2c_board_info __initdata mop500_i2c0_devices[] = {
-	{
-		I2C_BOARD_INFO("tc3589x", 0x42),
-		.irq		= NOMADIK_GPIO_TO_IRQ(217),
-		.platform_data  = &mop500_tc35892_data,
-	},
-	{
-		I2C_BOARD_INFO("tps61052", 0x33),
-		.platform_data  = &mop500_tps61052_data,
-	},
-};
-
-static struct i2c_board_info __initdata mop500_i2c2_devices[] = {
-	{
-		/* lp5521 LED driver, 1st device */
-		I2C_BOARD_INFO("lp5521", 0x33),
-		.platform_data = &lp5521_pri_data,
-	},
-	{
-		/* lp5521 LED driver, 2st device */
-		I2C_BOARD_INFO("lp5521", 0x34),
-		.platform_data = &lp5521_sec_data,
-	},
-	{
-		/* Light sensor Rohm BH1780GLI */
-		I2C_BOARD_INFO("bh1780", 0x29),
-	},
-};
-
-static int __init mop500_i2c_board_init(void)
-{
-	if (machine_is_u8500())
-		mop500_uib_i2c_add(0, mop500_i2c0_devices,
-				   ARRAY_SIZE(mop500_i2c0_devices));
-	mop500_uib_i2c_add(2, mop500_i2c2_devices,
-			   ARRAY_SIZE(mop500_i2c2_devices));
-	return 0;
-}
-device_initcall(mop500_i2c_board_init);
-
-static void __init mop500_i2c_init(struct device *parent)
-{
-	db8500_add_i2c0(parent, NULL);
-	db8500_add_i2c1(parent, NULL);
-	db8500_add_i2c2(parent, NULL);
-	db8500_add_i2c3(parent, NULL);
-}
-
-static struct gpio_keys_button mop500_gpio_keys[] = {
-	{
-		.desc			= "SFH7741 Proximity Sensor",
-		.type			= EV_SW,
-		.code			= SW_FRONT_PROXIMITY,
-		.active_low		= 0,
-		.can_disable		= 1,
-	}
-};
-
-static struct regulator *prox_regulator;
-static int mop500_prox_activate(struct device *dev);
-static void mop500_prox_deactivate(struct device *dev);
-
-static struct gpio_keys_platform_data mop500_gpio_keys_data = {
-	.buttons	= mop500_gpio_keys,
-	.nbuttons	= ARRAY_SIZE(mop500_gpio_keys),
-	.enable		= mop500_prox_activate,
-	.disable	= mop500_prox_deactivate,
-};
-
-static struct platform_device mop500_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= 0,
-	.dev	= {
-		.platform_data	= &mop500_gpio_keys_data,
-	},
-};
-
-static int mop500_prox_activate(struct device *dev)
-{
-	prox_regulator = regulator_get(&mop500_gpio_keys_device.dev,
-						"vcc");
-	if (IS_ERR(prox_regulator)) {
-		dev_err(&mop500_gpio_keys_device.dev,
-			"no regulator\n");
-		return PTR_ERR(prox_regulator);
-	}
-
-	return regulator_enable(prox_regulator);
-}
-
-static void mop500_prox_deactivate(struct device *dev)
-{
-	regulator_disable(prox_regulator);
-	regulator_put(prox_regulator);
-}
-
-static struct cryp_platform_data u8500_cryp1_platform_data = {
-		.mem_to_engine = {
-				.dir = DMA_MEM_TO_DEV,
-				.dev_type = DB8500_DMA_DEV48_CAC1,
-				.mode = STEDMA40_MODE_LOGICAL,
-		},
-		.engine_to_mem = {
-				.dir = DMA_DEV_TO_MEM,
-				.dev_type = DB8500_DMA_DEV48_CAC1,
-				.mode = STEDMA40_MODE_LOGICAL,
-		}
-};
-
-static struct stedma40_chan_cfg u8500_hash_dma_cfg_tx = {
-		.dir = DMA_MEM_TO_DEV,
-		.dev_type = DB8500_DMA_DEV50_HAC1_TX,
-		.mode = STEDMA40_MODE_LOGICAL,
-};
-
-static struct hash_platform_data u8500_hash1_platform_data = {
-		.mem_to_engine = &u8500_hash_dma_cfg_tx,
-		.dma_filter = stedma40_filter,
-};
-
-/* add any platform devices here - TODO */
-static struct platform_device *mop500_platform_devs[] __initdata = {
-	&mop500_gpio_keys_device,
-	&sdi0_regulator,
 };
 
 #ifdef CONFIG_STE_DMA40
@@ -480,236 +76,3 @@ struct pl022_ssp_controller ssp0_plat = {
 	 */
 	.num_chipselect = 5,
 };
-
-static void __init mop500_spi_init(struct device *parent)
-{
-	db8500_add_ssp0(parent, &ssp0_plat);
-}
-
-#ifdef CONFIG_STE_DMA40
-static struct stedma40_chan_cfg uart0_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV13_UART0,
-};
-
-static struct stedma40_chan_cfg uart0_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV13_UART0,
-};
-
-static struct stedma40_chan_cfg uart1_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV12_UART1,
-};
-
-static struct stedma40_chan_cfg uart1_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV12_UART1,
-};
-
-static struct stedma40_chan_cfg uart2_dma_cfg_rx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_DEV_TO_MEM,
-	.dev_type = DB8500_DMA_DEV11_UART2,
-};
-
-static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
-	.mode = STEDMA40_MODE_LOGICAL,
-	.dir = DMA_MEM_TO_DEV,
-	.dev_type = DB8500_DMA_DEV11_UART2,
-};
-#endif
-
-struct amba_pl011_data uart0_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart0_dma_cfg_rx,
-	.dma_tx_param = &uart0_dma_cfg_tx,
-#endif
-};
-
-struct amba_pl011_data uart1_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart1_dma_cfg_rx,
-	.dma_tx_param = &uart1_dma_cfg_tx,
-#endif
-};
-
-struct amba_pl011_data uart2_plat = {
-#ifdef CONFIG_STE_DMA40
-	.dma_filter = stedma40_filter,
-	.dma_rx_param = &uart2_dma_cfg_rx,
-	.dma_tx_param = &uart2_dma_cfg_tx,
-#endif
-};
-
-static void __init mop500_uart_init(struct device *parent)
-{
-	db8500_add_uart0(parent, &uart0_plat);
-	db8500_add_uart1(parent, &uart1_plat);
-	db8500_add_uart2(parent, &uart2_plat);
-}
-
-static void __init u8500_cryp1_hash1_init(struct device *parent)
-{
-	db8500_add_cryp1(parent, &u8500_cryp1_platform_data);
-	db8500_add_hash1(parent, &u8500_hash1_platform_data);
-}
-
-static struct platform_device *snowball_platform_devs[] __initdata = {
-	&snowball_led_dev,
-	&snowball_key_dev,
-	&snowball_sbnet_dev,
-	&snowball_gpio_en_3v3_regulator_dev,
-	&u8500_cpufreq_cooling_device,
-	&sdi0_regulator,
-};
-
-static void __init mop500_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i;
-
-	platform_device_register(&db8500_prcmu_device);
-	mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR;
-
-	sdi0_reg_info.enable_gpio = GPIO_SDMMC_EN;
-	sdi0_reg_info.gpios[0].gpio = GPIO_SDMMC_1V8_3V_SEL;
-
-	mop500_pinmaps_init();
-	parent = u8500_init_devices();
-
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(mop500_platform_devs,
-			ARRAY_SIZE(mop500_platform_devs));
-
-	mop500_i2c_init(parent);
-	mop500_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_audio_init(parent);
-	mop500_uart_init(parent);
-	u8500_cryp1_hash1_init(parent);
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-
-static void __init snowball_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i;
-
-	platform_device_register(&db8500_prcmu_device);
-
-	sdi0_reg_info.enable_gpio = SNOWBALL_SDMMC_EN_GPIO;
-	sdi0_reg_info.gpios[0].gpio = SNOWBALL_SDMMC_1V8_3V_GPIO;
-
-	snowball_pinmaps_init();
-	parent = u8500_init_devices();
-
-	for (i = 0; i < ARRAY_SIZE(snowball_platform_devs); i++)
-		snowball_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(snowball_platform_devs,
-			ARRAY_SIZE(snowball_platform_devs));
-
-	mop500_i2c_init(parent);
-	snowball_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_audio_init(parent);
-	mop500_uart_init(parent);
-
-	u8500_cryp1_hash1_init(parent);
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-static void __init hrefv60_init_machine(void)
-{
-	struct device *parent = NULL;
-	int i;
-
-	platform_device_register(&db8500_prcmu_device);
-	/*
-	 * The HREFv60 board removed a GPIO expander and routed
-	 * all these GPIO pins to the internal GPIO controller
-	 * instead.
-	 */
-	mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO;
-
-	sdi0_reg_info.enable_gpio = HREFV60_SDMMC_EN_GPIO;
-	sdi0_reg_info.gpios[0].gpio = HREFV60_SDMMC_1V8_3V_GPIO;
-
-	hrefv60_pinmaps_init();
-	parent = u8500_init_devices();
-
-	for (i = 0; i < ARRAY_SIZE(mop500_platform_devs); i++)
-		mop500_platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(mop500_platform_devs,
-			ARRAY_SIZE(mop500_platform_devs));
-
-	mop500_i2c_init(parent);
-	hrefv60_sdi_init(parent);
-	mop500_spi_init(parent);
-	mop500_audio_init(parent);
-	mop500_uart_init(parent);
-
-	/* This board has full regulator constraints */
-	regulator_has_full_constraints();
-}
-
-MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
-	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.init_time	= ux500_timer_init,
-	.init_machine	= mop500_init_machine,
-	.init_late	= ux500_init_late,
-	.restart        = ux500_restart,
-MACHINE_END
-
-MACHINE_START(U8520, "ST-Ericsson U8520 Platform HREFP520")
-	.atag_offset	= 0x100,
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	.init_time	= ux500_timer_init,
-	.init_machine	= mop500_init_machine,
-	.init_late	= ux500_init_late,
-	.restart        = ux500_restart,
-MACHINE_END
-
-MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+")
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	.init_time	= ux500_timer_init,
-	.init_machine	= hrefv60_init_machine,
-	.init_late	= ux500_init_late,
-	.restart        = ux500_restart,
-MACHINE_END
-
-MACHINE_START(SNOWBALL, "Calao Systems Snowball platform")
-	.atag_offset	= 0x100,
-	.smp		= smp_ops(ux500_smp_ops),
-	.map_io		= u8500_map_io,
-	.init_irq	= ux500_init_irq,
-	/* we re-use nomadik timer here */
-	.init_time	= ux500_timer_init,
-	.init_machine	= snowball_init_machine,
-	.init_late	= NULL,
-	.restart        = ux500_restart,
-MACHINE_END
diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h
index d6fab166cbf1..511d6febbe99 100644
--- a/arch/arm/mach-ux500/board-mop500.h
+++ b/arch/arm/mach-ux500/board-mop500.h
@@ -79,7 +79,6 @@
 #define SNOWBALL_EN_3V3_ETH_GPIO	MOP500_AB8500_PIN_GPIO(26)	/* GPIO26 */
 
 struct device;
-struct i2c_board_info;
 extern struct mmci_platform_data mop500_sdi0_data;
 extern struct mmci_platform_data mop500_sdi1_data;
 extern struct mmci_platform_data mop500_sdi2_data;
@@ -88,25 +87,10 @@ extern struct msp_i2s_platform_data msp0_platform_data;
 extern struct msp_i2s_platform_data msp1_platform_data;
 extern struct msp_i2s_platform_data msp2_platform_data;
 extern struct msp_i2s_platform_data msp3_platform_data;
-extern struct arm_pmu_platdata db8500_pmu_platdata;
-extern struct amba_pl011_data uart0_plat;
-extern struct amba_pl011_data uart1_plat;
-extern struct amba_pl011_data uart2_plat;
 extern struct pl022_ssp_controller ssp0_plat;
-extern struct stedma40_platform_data dma40_plat_data;
 
-extern void mop500_sdi_init(struct device *parent);
-extern void snowball_sdi_init(struct device *parent);
-extern void hrefv60_sdi_init(struct device *parent);
-extern void mop500_sdi_tc35892_init(struct device *parent);
-void __init mop500_u8500uib_init(void);
-void __init mop500_stuib_init(void);
 void __init mop500_pinmaps_init(void);
 void __init snowball_pinmaps_init(void);
 void __init hrefv60_pinmaps_init(void);
-void mop500_audio_init(struct device *parent);
 
-int __init mop500_uib_init(void);
-void mop500_uib_i2c_add(int busnum, struct i2c_board_info *info,
-		unsigned n);
 #endif
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c
index 301c3460d96a..2e85c1e72535 100644
--- a/arch/arm/mach-ux500/cpu-db8500.c
+++ b/arch/arm/mach-ux500/cpu-db8500.c
@@ -32,7 +32,6 @@
 #include "irqs.h"
 
 #include "devices-db8500.h"
-#include "ste-dma40-db8500.h"
 #include "db8500-regs.h"
 #include "board-mop500.h"
 #include "id.h"
@@ -93,14 +92,6 @@ void __init u8500_map_io(void)
 		iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
 }
 
-static struct resource db8500_pmu_resources[] = {
-	[0] = {
-		.start		= IRQ_DB8500_PMU,
-		.end		= IRQ_DB8500_PMU,
-		.flags		= IORESOURCE_IRQ,
-	},
-};
-
 /*
  * The PMU IRQ lines of two cores are wired together into a single interrupt.
  * Bounce the interrupt to the other core if it's not ours.
@@ -125,54 +116,6 @@ struct arm_pmu_platdata db8500_pmu_platdata = {
 	.handle_irq		= db8500_pmu_handler,
 };
 
-static struct platform_device db8500_pmu_device = {
-	.name			= "arm-pmu",
-	.id			= -1,
-	.num_resources		= ARRAY_SIZE(db8500_pmu_resources),
-	.resource		= db8500_pmu_resources,
-	.dev.platform_data	= &db8500_pmu_platdata,
-};
-
-static struct platform_device *platform_devs[] __initdata = {
-	&u8500_dma40_device,
-	&db8500_pmu_device,
-};
-
-static resource_size_t __initdata db8500_gpio_base[] = {
-	U8500_GPIOBANK0_BASE,
-	U8500_GPIOBANK1_BASE,
-	U8500_GPIOBANK2_BASE,
-	U8500_GPIOBANK3_BASE,
-	U8500_GPIOBANK4_BASE,
-	U8500_GPIOBANK5_BASE,
-	U8500_GPIOBANK6_BASE,
-	U8500_GPIOBANK7_BASE,
-	U8500_GPIOBANK8_BASE,
-};
-
-static void __init db8500_add_gpios(struct device *parent)
-{
-	struct nmk_gpio_platform_data pdata = {
-		.supports_sleepmode = true,
-	};
-
-	dbx500_add_gpios(parent, db8500_gpio_base,
-			 ARRAY_SIZE(db8500_gpio_base),
-			 IRQ_DB8500_GPIO0, &pdata);
-	dbx500_add_pinctrl(parent, "pinctrl-db8500", U8500_PRCMU_BASE);
-}
-
-static int usb_db8500_dma_cfg[] = {
-	DB8500_DMA_DEV38_USB_OTG_IEP_AND_OEP_1_9,
-	DB8500_DMA_DEV37_USB_OTG_IEP_AND_OEP_2_10,
-	DB8500_DMA_DEV36_USB_OTG_IEP_AND_OEP_3_11,
-	DB8500_DMA_DEV19_USB_OTG_IEP_AND_OEP_4_12,
-	DB8500_DMA_DEV18_USB_OTG_IEP_AND_OEP_5_13,
-	DB8500_DMA_DEV17_USB_OTG_IEP_AND_OEP_6_14,
-	DB8500_DMA_DEV16_USB_OTG_IEP_AND_OEP_7_15,
-	DB8500_DMA_DEV39_USB_OTG_IEP_AND_OEP_8
-};
-
 static const char *db8500_read_soc_id(void)
 {
 	void __iomem *uid = __io_address(U8500_BB_UID_BASE);
@@ -192,60 +135,22 @@ static struct device * __init db8500_soc_device_init(void)
 	return ux500_soc_device_init(soc_id);
 }
 
-/*
- * This function is called from the board init
- */
-struct device * __init u8500_init_devices(void)
-{
-	struct device *parent;
-	int i;
-
-	parent = db8500_soc_device_init();
-
-	db8500_add_rtc(parent);
-	db8500_add_gpios(parent);
-	db8500_add_usb(parent, usb_db8500_dma_cfg, usb_db8500_dma_cfg);
-
-	for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
-		platform_devs[i]->dev.parent = parent;
-
-	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
-
-	return parent;
-}
-
 #ifdef CONFIG_MACH_UX500_DT
 static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires call-back bindings. */
 	OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
 	/* Requires DMA bindings. */
-	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL),
-	OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL),
-	OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL),
-	OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0",  &ssp0_plat),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0",  NULL),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1",  NULL),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2",  NULL),
-	OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4",  NULL),
-	/* Requires clock name bindings. */
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
-	OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
-	OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
-	OF_DEV_AUXDATA("stericsson,db8500-musb", 0xa03e0000, "musb-ux500.0", NULL),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
+		       "ux500-msp-i2s.0", &msp0_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
+		       "ux500-msp-i2s.1", &msp1_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
+		       "ux500-msp-i2s.2", &msp2_platform_data),
+	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
+		       "ux500-msp-i2s.3", &msp3_platform_data),
+	/* Requires non-DT:able platform data. */
 	OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu",
 			&db8500_prcmu_pdata),
-	OF_DEV_AUXDATA("smsc,lan9115", 0x50000000, "smsc911x.0", NULL),
 	OF_DEV_AUXDATA("stericsson,ux500-cryp", 0xa03cb000, "cryp1", NULL),
 	OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL),
 	OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0",
@@ -253,17 +158,6 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires device name bindings. */
 	OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE,
 		"pinctrl-db8500", NULL),
-	/* Requires clock name and DMA bindings. */
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
-		"ux500-msp-i2s.0", &msp0_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
-		"ux500-msp-i2s.1", &msp1_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
-		"ux500-msp-i2s.2", &msp2_platform_data),
-	OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
-		"ux500-msp-i2s.3", &msp3_platform_data),
-	/* Requires clock name bindings and channel address lookup table. */
-	OF_DEV_AUXDATA("stericsson,db8500-dma40", 0x801C0000, "dma40.0", NULL),
 	{},
 };
 
diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c
index 5d7eebcabc63..f84d4397896b 100644
--- a/arch/arm/mach-ux500/cpu.c
+++ b/arch/arm/mach-ux500/cpu.c
@@ -78,9 +78,17 @@ void __init ux500_init_irq(void)
 	if (cpu_is_u8500_family()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
-		u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
-			       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
-			       U8500_CLKRST6_BASE);
+
+		if (of_have_populated_dt())
+			u8500_of_clk_init(U8500_CLKRST1_BASE,
+					  U8500_CLKRST2_BASE,
+					  U8500_CLKRST3_BASE,
+					  U8500_CLKRST5_BASE,
+					  U8500_CLKRST6_BASE);
+		else
+			u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE,
+				       U8500_CLKRST3_BASE, U8500_CLKRST5_BASE,
+				       U8500_CLKRST6_BASE);
 	} else if (cpu_is_u9540()) {
 		prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1);
 		ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1);
@@ -96,11 +104,6 @@ void __init ux500_init_irq(void)
 	}
 }
 
-void __init ux500_init_late(void)
-{
-	mop500_uib_init();
-}
-
 static const char * __init ux500_get_machine(void)
 {
 	return kasprintf(GFP_KERNEL, "DB%4x", dbx500_partnumber());
diff --git a/arch/arm/mach-ux500/devices-common.c b/arch/arm/mach-ux500/devices-common.c
deleted file mode 100644
index f71b3d7bd4fb..000000000000
--- a/arch/arm/mach-ux500/devices-common.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#include <linux/kernel.h>
-#include <linux/dma-mapping.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-
-#include "irqs.h"
-
-#include "devices-common.h"
-
-static struct platform_device *
-dbx500_add_gpio(struct device *parent, int id, resource_size_t addr, int irq,
-		struct nmk_gpio_platform_data *pdata)
-{
-	struct resource resources[] = {
-		{
-			.start	= addr,
-			.end	= addr + 127,
-			.flags	= IORESOURCE_MEM,
-		},
-		{
-			.start	= irq,
-			.end	= irq,
-			.flags	= IORESOURCE_IRQ,
-		}
-	};
-
-	return platform_device_register_resndata(
-		parent,
-		"gpio",
-		id,
-		resources,
-		ARRAY_SIZE(resources),
-		pdata,
-		sizeof(*pdata));
-}
-
-void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
-		      int irq, struct nmk_gpio_platform_data *pdata)
-{
-	int first = 0;
-	int i;
-
-	for (i = 0; i < num; i++, first += 32, irq++) {
-		pdata->first_gpio = first;
-		pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
-		pdata->num_gpio = 32;
-
-		dbx500_add_gpio(parent, i, base[i], irq, pdata);
-	}
-}
diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h
deleted file mode 100644
index 96fa4ac89e2e..000000000000
--- a/arch/arm/mach-ux500/devices-common.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * License terms: GNU General Public License (GPL), version 2.
- */
-
-#ifndef __DEVICES_COMMON_H
-#define __DEVICES_COMMON_H
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/sys_soc.h>
-#include <linux/amba/bus.h>
-#include <linux/platform_data/i2c-nomadik.h>
-#include <linux/platform_data/crypto-ux500.h>
-
-struct spi_master_cntlr;
-
-static inline struct amba_device *
-dbx500_add_msp_spi(struct device *parent, const char *name,
-		   resource_size_t base, int irq,
-		   struct spi_master_cntlr *pdata)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
-				   pdata, 0);
-}
-
-static inline struct amba_device *
-dbx500_add_spi(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct spi_master_cntlr *pdata,
-	       u32 periphid)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
-				   pdata, periphid);
-}
-
-struct mmci_platform_data;
-
-static inline struct amba_device *
-dbx500_add_sdi(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct mmci_platform_data *pdata, u32 periphid)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0,
-				   pdata, periphid);
-}
-
-struct amba_pl011_data;
-
-static inline struct amba_device *
-dbx500_add_uart(struct device *parent, const char *name, resource_size_t base,
-		int irq, struct amba_pl011_data *pdata)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0);
-}
-
-struct nmk_i2c_controller;
-
-static inline struct amba_device *
-dbx500_add_i2c(struct device *parent, int id, resource_size_t base, int irq,
-	       struct nmk_i2c_controller *data)
-{
-	/* Conjure a name similar to what the platform device used to have */
-	char name[16];
-
-	snprintf(name, sizeof(name), "nmk-i2c.%d", id);
-	return amba_apb_device_add(parent, name, base, SZ_4K, irq, 0, data, 0);
-}
-
-static inline struct amba_device *
-dbx500_add_rtc(struct device *parent, resource_size_t base, int irq)
-{
-	return amba_apb_device_add(parent, "rtc-pl031", base, SZ_4K, irq,
-				0, NULL, 0);
-}
-
-struct cryp_platform_data;
-
-static inline struct platform_device *
-dbx500_add_cryp1(struct device *parent, int id, resource_size_t base, int irq,
-		struct cryp_platform_data *pdata)
-{
-	struct resource res[] = {
-			DEFINE_RES_MEM(base, SZ_4K),
-			DEFINE_RES_IRQ(irq),
-	};
-
-	struct platform_device_info pdevinfo = {
-			.parent = parent,
-			.name = "cryp1",
-			.id = id,
-			.res = res,
-			.num_res = ARRAY_SIZE(res),
-			.data = pdata,
-			.size_data = sizeof(*pdata),
-			.dma_mask = DMA_BIT_MASK(32),
-	};
-
-	return platform_device_register_full(&pdevinfo);
-}
-
-struct hash_platform_data;
-
-static inline struct platform_device *
-dbx500_add_hash1(struct device *parent, int id, resource_size_t base,
-		struct hash_platform_data *pdata)
-{
-	struct resource res[] = {
-			DEFINE_RES_MEM(base, SZ_4K),
-	};
-
-	struct platform_device_info pdevinfo = {
-			.parent = parent,
-			.name = "hash1",
-			.id = id,
-			.res = res,
-			.num_res = ARRAY_SIZE(res),
-			.data = pdata,
-			.size_data = sizeof(*pdata),
-			.dma_mask = DMA_BIT_MASK(32),
-	};
-
-	return platform_device_register_full(&pdevinfo);
-}
-
-struct nmk_gpio_platform_data;
-
-void dbx500_add_gpios(struct device *parent, resource_size_t *base, int num,
-		      int irq, struct nmk_gpio_platform_data *pdata);
-
-static inline void
-dbx500_add_pinctrl(struct device *parent, const char *name,
-		   resource_size_t base)
-{
-	struct resource res[] = {
-		DEFINE_RES_MEM(base, SZ_8K),
-	};
-	struct platform_device_info pdevinfo = {
-		.parent = parent,
-		.name = name,
-		.id = -1,
-		.res = res,
-		.num_res = ARRAY_SIZE(res),
-	};
-
-	platform_device_register_full(&pdevinfo);
-}
-
-#endif
diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c
index bc316062e0c2..c59f89d058ff 100644
--- a/arch/arm/mach-ux500/devices-db8500.c
+++ b/arch/arm/mach-ux500/devices-db8500.c
@@ -9,10 +9,8 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/gpio.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
-#include <linux/platform_data/dma-ste-dma40.h>
 #include <linux/mfd/dbx500-prcmu.h>
 
 #include "setup.h"
@@ -20,62 +18,6 @@
 
 #include "db8500-regs.h"
 #include "devices-db8500.h"
-#include "ste-dma40-db8500.h"
-
-static struct resource dma40_resources[] = {
-	[0] = {
-		.start = U8500_DMA_BASE,
-		.end   = U8500_DMA_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "base",
-	},
-	[1] = {
-		.start = U8500_DMA_LCPA_BASE,
-		.end   = U8500_DMA_LCPA_BASE + 2 * SZ_1K - 1,
-		.flags = IORESOURCE_MEM,
-		.name  = "lcpa",
-	},
-	[2] = {
-		.start = IRQ_DB8500_DMA,
-		.end   = IRQ_DB8500_DMA,
-		.flags = IORESOURCE_IRQ,
-	}
-};
-
-struct stedma40_platform_data dma40_plat_data = {
-	.disabled_channels = {-1},
-};
-
-struct platform_device u8500_dma40_device = {
-	.dev = {
-		.platform_data = &dma40_plat_data,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.name = "dma40",
-	.id = 0,
-	.num_resources = ARRAY_SIZE(dma40_resources),
-	.resource = dma40_resources
-};
-
-struct resource keypad_resources[] = {
-	[0] = {
-		.start = U8500_SKE_BASE,
-		.end = U8500_SKE_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = IRQ_DB8500_KB,
-		.end = IRQ_DB8500_KB,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device u8500_ske_keypad_device = {
-	.name = "nmk-ske-keypad",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(keypad_resources),
-	.resource = keypad_resources,
-};
 
 struct prcmu_pdata db8500_prcmu_pdata = {
 	.ab_platdata	= &ab8500_platdata,
@@ -84,39 +26,3 @@ struct prcmu_pdata db8500_prcmu_pdata = {
 	.version_offset	= DB8500_PRCMU_FW_VERSION_OFFSET,
 	.legacy_offset	= DB8500_PRCMU_LEGACY_OFFSET,
 };
-
-static struct resource db8500_prcmu_res[] = {
-	{
-		.name  = "prcmu",
-		.start = U8500_PRCMU_BASE,
-		.end   = U8500_PRCMU_BASE + SZ_8K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name  = "prcmu-tcdm",
-		.start = U8500_PRCMU_TCDM_BASE,
-		.end   = U8500_PRCMU_TCDM_BASE + SZ_4K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.name  = "irq",
-		.start = IRQ_DB8500_PRCMU1,
-		.end   = IRQ_DB8500_PRCMU1,
-		.flags = IORESOURCE_IRQ,
-	},
-	{
-		.name  = "prcmu-tcpm",
-		.start = U8500_PRCMU_TCPM_BASE,
-		.end   = U8500_PRCMU_TCPM_BASE + SZ_32K - 1,
-		.flags = IORESOURCE_MEM,
-	},
-};
-
-struct platform_device db8500_prcmu_device = {
-	.name			= "db8500-prcmu",
-	.resource		= db8500_prcmu_res,
-	.num_resources		= ARRAY_SIZE(db8500_prcmu_res),
-	.dev = {
-		.platform_data = &db8500_prcmu_pdata,
-	},
-};
diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h
index 321998320f98..b8ffc9979bb2 100644
--- a/arch/arm/mach-ux500/devices-db8500.h
+++ b/arch/arm/mach-ux500/devices-db8500.h
@@ -8,122 +8,12 @@
 #ifndef __DEVICES_DB8500_H
 #define __DEVICES_DB8500_H
 
-#include <linux/platform_data/usb-musb-ux500.h>
 #include "irqs.h"
 #include "db8500-regs.h"
-#include "devices-common.h"
 
-struct ske_keypad_platform_data;
-struct pl022_ssp_controller;
 struct platform_device;
 
 extern struct ab8500_platform_data ab8500_platdata;
 extern struct prcmu_pdata db8500_prcmu_pdata;
-extern struct platform_device db8500_prcmu_device;
 
-static inline struct platform_device *
-db8500_add_ske_keypad(struct device *parent,
-		      struct ske_keypad_platform_data *pdata,
-		      size_t size)
-{
-	struct resource resources[] = {
-		DEFINE_RES_MEM(U8500_SKE_BASE, SZ_4K),
-		DEFINE_RES_IRQ(IRQ_DB8500_KB),
-	};
-
-	return platform_device_register_resndata(parent, "nmk-ske-keypad", -1,
-						 resources, 2, pdata, size);
-}
-
-static inline struct amba_device *
-db8500_add_ssp(struct device *parent, const char *name, resource_size_t base,
-	       int irq, struct pl022_ssp_controller *pdata)
-{
-	return amba_ahb_device_add(parent, name, base, SZ_4K, irq, 0, pdata, 0);
-}
-
-#define db8500_add_i2c0(parent, pdata) \
-	dbx500_add_i2c(parent, 0, U8500_I2C0_BASE, IRQ_DB8500_I2C0, pdata)
-#define db8500_add_i2c1(parent, pdata) \
-	dbx500_add_i2c(parent, 1, U8500_I2C1_BASE, IRQ_DB8500_I2C1, pdata)
-#define db8500_add_i2c2(parent, pdata) \
-	dbx500_add_i2c(parent, 2, U8500_I2C2_BASE, IRQ_DB8500_I2C2, pdata)
-#define db8500_add_i2c3(parent, pdata) \
-	dbx500_add_i2c(parent, 3, U8500_I2C3_BASE, IRQ_DB8500_I2C3, pdata)
-#define db8500_add_i2c4(parent, pdata) \
-	dbx500_add_i2c(parent, 4, U8500_I2C4_BASE, IRQ_DB8500_I2C4, pdata)
-
-#define db8500_add_msp0_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp0", U8500_MSP0_BASE, \
-			   IRQ_DB8500_MSP0, pdata)
-#define db8500_add_msp1_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp1", U8500_MSP1_BASE, \
-			   IRQ_DB8500_MSP1, pdata)
-#define db8500_add_msp2_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp2", U8500_MSP2_BASE, \
-			   IRQ_DB8500_MSP2, pdata)
-#define db8500_add_msp3_spi(parent, pdata) \
-	dbx500_add_msp_spi(parent, "msp3", U8500_MSP3_BASE, \
-			   IRQ_DB8500_MSP1, pdata)
-
-#define db8500_add_rtc(parent) \
-	dbx500_add_rtc(parent, U8500_RTC_BASE, IRQ_DB8500_RTC);
-
-#define db8500_add_usb(parent, rx_cfg, tx_cfg) \
-	ux500_add_usb(parent, U8500_USBOTG_BASE, \
-		      IRQ_DB8500_USBOTG, rx_cfg, tx_cfg)
-
-#define db8500_add_sdi0(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi0", U8500_SDI0_BASE, \
-		       IRQ_DB8500_SDMMC0, pdata, pid)
-#define db8500_add_sdi1(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi1", U8500_SDI1_BASE, \
-		       IRQ_DB8500_SDMMC1, pdata, pid)
-#define db8500_add_sdi2(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi2", U8500_SDI2_BASE, \
-		       IRQ_DB8500_SDMMC2, pdata, pid)
-#define db8500_add_sdi3(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi3", U8500_SDI3_BASE, \
-		       IRQ_DB8500_SDMMC3, pdata, pid)
-#define db8500_add_sdi4(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi4", U8500_SDI4_BASE, \
-		       IRQ_DB8500_SDMMC4, pdata, pid)
-#define db8500_add_sdi5(parent, pdata, pid) \
-	dbx500_add_sdi(parent, "sdi5", U8500_SDI5_BASE, \
-		       IRQ_DB8500_SDMMC5, pdata, pid)
-
-#define db8500_add_ssp0(parent, pdata) \
-	db8500_add_ssp(parent, "ssp0", U8500_SSP0_BASE, \
-		       IRQ_DB8500_SSP0, pdata)
-#define db8500_add_ssp1(parent, pdata) \
-	db8500_add_ssp(parent, "ssp1", U8500_SSP1_BASE, \
-		       IRQ_DB8500_SSP1, pdata)
-
-#define db8500_add_spi0(parent, pdata) \
-	dbx500_add_spi(parent, "spi0", U8500_SPI0_BASE, \
-		       IRQ_DB8500_SPI0, pdata, 0)
-#define db8500_add_spi1(parent, pdata) \
-	dbx500_add_spi(parent, "spi1", U8500_SPI1_BASE, \
-		       IRQ_DB8500_SPI1, pdata, 0)
-#define db8500_add_spi2(parent, pdata) \
-	dbx500_add_spi(parent, "spi2", U8500_SPI2_BASE, \
-		       IRQ_DB8500_SPI2, pdata, 0)
-#define db8500_add_spi3(parent, pdata) \
-	dbx500_add_spi(parent, "spi3", U8500_SPI3_BASE, \
-		       IRQ_DB8500_SPI3, pdata, 0)
-
-#define db8500_add_uart0(parent, pdata) \
-	dbx500_add_uart(parent, "uart0", U8500_UART0_BASE, \
-			IRQ_DB8500_UART0, pdata)
-#define db8500_add_uart1(parent, pdata) \
-	dbx500_add_uart(parent, "uart1", U8500_UART1_BASE, \
-			IRQ_DB8500_UART1, pdata)
-#define db8500_add_uart2(parent, pdata) \
-	dbx500_add_uart(parent, "uart2", U8500_UART2_BASE, \
-			IRQ_DB8500_UART2, pdata)
-
-#define db8500_add_cryp1(parent, pdata) \
-	dbx500_add_cryp1(parent, -1, U8500_CRYP1_BASE, IRQ_DB8500_CRYP1, pdata)
-#define db8500_add_hash1(parent, pdata) \
-	dbx500_add_hash1(parent, -1, U8500_HASH1_BASE, pdata)
 #endif
diff --git a/arch/arm/mach-ux500/devices.h b/arch/arm/mach-ux500/devices.h
index cbc6f1e4104d..5bca7c605cd6 100644
--- a/arch/arm/mach-ux500/devices.h
+++ b/arch/arm/mach-ux500/devices.h
@@ -10,14 +10,6 @@
 struct platform_device;
 struct amba_device;
 
-extern struct platform_device u8500_gpio_devs[];
-
 extern struct amba_device ux500_pl031_device;
 
-extern struct platform_device ux500_hash1_device;
-extern struct platform_device ux500_cryp1_device;
-
-extern struct platform_device u8500_dma40_device;
-extern struct platform_device ux500_ske_keypad_device;
-
 #endif
diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h
index 656324aad18e..bdb356498a74 100644
--- a/arch/arm/mach-ux500/setup.h
+++ b/arch/arm/mach-ux500/setup.h
@@ -24,7 +24,6 @@ extern void __init u8500_map_io(void);
 extern struct device * __init u8500_init_devices(void);
 
 extern void __init ux500_init_irq(void);
-extern void __init ux500_init_late(void);
 
 extern struct device *ux500_soc_device_init(const char *soc_id);
 
diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c
index b6bd0efcbe64..05a4ff78b3bd 100644
--- a/arch/arm/mach-ux500/timer.c
+++ b/arch/arm/mach-ux500/timer.c
@@ -97,8 +97,8 @@ dt_fail:
 	 * sched_clock with higher rating then MTU since is always-on.
 	 *
 	 */
-
-	nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
+	if (!of_have_populated_dt())
+		nmdk_timer_init(mtu_timer_base, IRQ_MTU0);
 	clksrc_dbx500_prcmu_init(prcmu_timer_base);
 	ux500_twd_init();
 }
diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
deleted file mode 100644
index b7bd8d3a5507..000000000000
--- a/arch/arm/mach-ux500/usb.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * Copyright (C) ST-Ericsson SA 2011
- *
- * Author: Mian Yousaf Kaukab <mian.yousaf.kaukab@stericsson.com>
- * License terms: GNU General Public License (GPL) version 2
- */
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_data/usb-musb-ux500.h>
-#include <linux/platform_data/dma-ste-dma40.h>
-
-#include "db8500-regs.h"
-
-#define MUSB_DMA40_RX_CH { \
-		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = DMA_DEV_TO_MEM, \
-	}
-
-#define MUSB_DMA40_TX_CH { \
-		.mode = STEDMA40_MODE_LOGICAL, \
-		.dir = DMA_MEM_TO_DEV, \
-	}
-
-static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
-	= {
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH,
-	MUSB_DMA40_RX_CH
-};
-
-static struct stedma40_chan_cfg musb_dma_tx_ch[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS]
-	= {
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-	MUSB_DMA40_TX_CH,
-};
-
-static void *ux500_dma_rx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
-	&musb_dma_rx_ch[0],
-	&musb_dma_rx_ch[1],
-	&musb_dma_rx_ch[2],
-	&musb_dma_rx_ch[3],
-	&musb_dma_rx_ch[4],
-	&musb_dma_rx_ch[5],
-	&musb_dma_rx_ch[6],
-	&musb_dma_rx_ch[7]
-};
-
-static void *ux500_dma_tx_param_array[UX500_MUSB_DMA_NUM_RX_TX_CHANNELS] = {
-	&musb_dma_tx_ch[0],
-	&musb_dma_tx_ch[1],
-	&musb_dma_tx_ch[2],
-	&musb_dma_tx_ch[3],
-	&musb_dma_tx_ch[4],
-	&musb_dma_tx_ch[5],
-	&musb_dma_tx_ch[6],
-	&musb_dma_tx_ch[7]
-};
-
-static struct ux500_musb_board_data musb_board_data = {
-	.dma_rx_param_array = ux500_dma_rx_param_array,
-	.dma_tx_param_array = ux500_dma_tx_param_array,
-	.dma_filter = stedma40_filter,
-};
-
-static struct musb_hdrc_platform_data musb_platform_data = {
-	.mode = MUSB_OTG,
-	.board_data = &musb_board_data,
-};
-
-static struct resource usb_resources[] = {
-	[0] = {
-		.name	= "usb-mem",
-		.flags	=  IORESOURCE_MEM,
-	},
-
-	[1] = {
-		.name   = "mc", /* hard-coded in musb */
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-struct platform_device ux500_musb_device = {
-	.name = "musb-ux500",
-	.id = 0,
-	.dev = {
-		.platform_data = &musb_platform_data,
-		.coherent_dma_mask = DMA_BIT_MASK(32),
-	},
-	.num_resources = ARRAY_SIZE(usb_resources),
-	.resource = usb_resources,
-};
-
-static inline void ux500_usb_dma_update_rx_ch_config(int *dev_type)
-{
-	u32 idx;
-
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
-		musb_dma_rx_ch[idx].dev_type = dev_type[idx];
-}
-
-static inline void ux500_usb_dma_update_tx_ch_config(int *dev_type)
-{
-	u32 idx;
-
-	for (idx = 0; idx < UX500_MUSB_DMA_NUM_RX_TX_CHANNELS; idx++)
-		musb_dma_tx_ch[idx].dev_type = dev_type[idx];
-}
-
-void ux500_add_usb(struct device *parent, resource_size_t base, int irq,
-		   int *dma_rx_cfg, int *dma_tx_cfg)
-{
-	ux500_musb_device.resource[0].start = base;
-	ux500_musb_device.resource[0].end = base + SZ_64K - 1;
-	ux500_musb_device.resource[1].start = irq;
-	ux500_musb_device.resource[1].end = irq;
-
-	ux500_usb_dma_update_rx_ch_config(dma_rx_cfg);
-	ux500_usb_dma_update_tx_ch_config(dma_tx_cfg);
-
-	ux500_musb_device.dev.parent = parent;
-
-	platform_device_register(&ux500_musb_device);
-}