Merge tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "A large number of cleanups, all over the platforms.  This is dominated
  largely by the Samsung platforms (s3c, s5p, exynos) and a few of the
  others moving code out of arch/arm into more appropriate subsystems.

  The clocksource and irqchip drivers are now abstracted to the point
  where platforms that are already cleaned up do not need to even
  specify the driver they use, it can all get configured from the device
  tree as we do for normal device drivers.  The clocksource changes
  basically touch every single platform in the process.

  We further clean up the use of platform specific header files here,
  with the goal of turning more of the platforms over to being
  "multiplatform" enabled, which implies that they cannot expose their
  headers to architecture independent code any more.

  It is expected that no functional changes are part of the cleanup.
  The overall reduction in total code lines is mostly the result of
  removing broken and obsolete code."

* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (133 commits)
  ARM: mvebu: correct gated clock documentation
  ARM: kirkwood: add missing include for nsa310
  ARM: exynos: move exynos4210-combiner to drivers/irqchip
  mfd: db8500-prcmu: update resource passing
  drivers/db8500-cpufreq: delete dangling include
  ARM: at91: remove NEOCORE 926 board
  sunxi: Cleanup the reset code and add meaningful registers defines
  ARM: S3C24XX: header mach/regs-mem.h local
  ARM: S3C24XX: header mach/regs-power.h local
  ARM: S3C24XX: header mach/regs-s3c2412-mem.h local
  ARM: S3C24XX: Remove plat-s3c24xx directory in arch/arm/
  ARM: S3C24XX: transform s3c2443 subirqs into new structure
  ARM: S3C24XX: modify s3c2443 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2443 irq code to irq.c
  ARM: S3C24XX: transform s3c2416 irqs into new structure
  ARM: S3C24XX: modify s3c2416 irq init to initialize all irqs
  ARM: S3C24XX: move s3c2416 irq init to common irq code
  ARM: S3C24XX: Modify s3c_irq_wake to use the hwirq property
  ARM: S3C24XX: Move irq syscore-ops to irq-pm
  clocksource: always define CLOCKSOURCE_OF_DECLARE
  ...

3 files changed, 76 insertions, 105 deletions

diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index e16d4bed0f7a..5c8983218183 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -24,6 +24,7 @@
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/of.h>
+#include <linux/irqchip.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -31,7 +32,6 @@
 #include <asm/mach-types.h>
 #include <asm/page.h>
 #include <asm/pgtable.h>
-#include <asm/hardware/gic.h>
 #include <asm/hardware/cache-l2x0.h>
 
 #include "common.h"
@@ -55,19 +55,6 @@ static void __init xilinx_init_machine(void)
 	of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL);
 }
 
-static struct of_device_id irq_match[] __initdata = {
-	{ .compatible = "arm,cortex-a9-gic", .data = gic_of_init, },
-	{ }
-};
-
-/**
- * xilinx_irq_init() - Interrupt controller initialization for the GIC.
- */
-static void __init xilinx_irq_init(void)
-{
-	of_irq_init(irq_match);
-}
-
 #define SCU_PERIPH_PHYS		0xF8F00000
 #define SCU_PERIPH_SIZE		SZ_8K
 #define SCU_PERIPH_VIRT		(VMALLOC_END - SCU_PERIPH_SIZE)
@@ -90,16 +77,9 @@ static void __init xilinx_zynq_timer_init(void)
 
 	xilinx_zynq_clocks_init(slcr);
 
-	xttcpss_timer_init();
+	xttcps_timer_init();
 }
 
-/*
- * Instantiate and initialize the system timer structure
- */
-static struct sys_timer xttcpss_sys_timer = {
-	.init		= xilinx_zynq_timer_init,
-};
-
 /**
  * xilinx_map_io() - Create memory mappings needed for early I/O.
  */
@@ -117,9 +97,8 @@ static const char *xilinx_dt_match[] = {
 
 MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform")
 	.map_io		= xilinx_map_io,
-	.init_irq	= xilinx_irq_init,
-	.handle_irq	= gic_handle_irq,
+	.init_irq	= irqchip_init,
 	.init_machine	= xilinx_init_machine,
-	.timer		= &xttcpss_sys_timer,
+	.init_time	= xilinx_zynq_timer_init,
 	.dt_compat	= xilinx_dt_match,
 MACHINE_END
diff --git a/arch/arm/mach-zynq/common.h b/arch/arm/mach-zynq/common.h
index 954b91c13c91..8b4dbbaa01cf 100644
--- a/arch/arm/mach-zynq/common.h
+++ b/arch/arm/mach-zynq/common.h
@@ -17,6 +17,6 @@
 #ifndef __MACH_ZYNQ_COMMON_H__
 #define __MACH_ZYNQ_COMMON_H__
 
-void __init xttcpss_timer_init(void);
+void __init xttcps_timer_init(void);
 
 #endif
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c
index de3df283da74..f9fbc9c1e7a6 100644
--- a/arch/arm/mach-zynq/timer.c
+++ b/arch/arm/mach-zynq/timer.c
@@ -15,39 +15,29 @@
  * GNU General Public License for more details.
  */
 
-#include <linux/kernel.h>
-#include <linux/init.h>
 #include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/types.h>
-#include <linux/clocksource.h>
 #include <linux/clockchips.h>
-#include <linux/io.h>
-#include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/slab.h>
 #include <linux/clk-provider.h>
-
 #include "common.h"
 
 /*
  * Timer Register Offset Definitions of Timer 1, Increment base address by 4
  * and use same offsets for Timer 2
  */
-#define XTTCPSS_CLK_CNTRL_OFFSET	0x00 /* Clock Control Reg, RW */
-#define XTTCPSS_CNT_CNTRL_OFFSET	0x0C /* Counter Control Reg, RW */
-#define XTTCPSS_COUNT_VAL_OFFSET	0x18 /* Counter Value Reg, RO */
-#define XTTCPSS_INTR_VAL_OFFSET		0x24 /* Interval Count Reg, RW */
-#define XTTCPSS_MATCH_1_OFFSET		0x30 /* Match 1 Value Reg, RW */
-#define XTTCPSS_MATCH_2_OFFSET		0x3C /* Match 2 Value Reg, RW */
-#define XTTCPSS_MATCH_3_OFFSET		0x48 /* Match 3 Value Reg, RW */
-#define XTTCPSS_ISR_OFFSET		0x54 /* Interrupt Status Reg, RO */
-#define XTTCPSS_IER_OFFSET		0x60 /* Interrupt Enable Reg, RW */
-
-#define XTTCPSS_CNT_CNTRL_DISABLE_MASK	0x1
-
-/* Setup the timers to use pre-scaling, using a fixed value for now that will
+#define XTTCPS_CLK_CNTRL_OFFSET		0x00 /* Clock Control Reg, RW */
+#define XTTCPS_CNT_CNTRL_OFFSET		0x0C /* Counter Control Reg, RW */
+#define XTTCPS_COUNT_VAL_OFFSET		0x18 /* Counter Value Reg, RO */
+#define XTTCPS_INTR_VAL_OFFSET		0x24 /* Interval Count Reg, RW */
+#define XTTCPS_ISR_OFFSET		0x54 /* Interrupt Status Reg, RO */
+#define XTTCPS_IER_OFFSET		0x60 /* Interrupt Enable Reg, RW */
+
+#define XTTCPS_CNT_CNTRL_DISABLE_MASK	0x1
+
+/*
+ * Setup the timers to use pre-scaling, using a fixed value for now that will
  * work across most input frequency, but it may need to be more dynamic
  */
 #define PRESCALE_EXPONENT	11	/* 2 ^ PRESCALE_EXPONENT = PRESCALE */
@@ -57,72 +47,73 @@
 #define CNT_CNTRL_RESET		(1<<4)
 
 /**
- * struct xttcpss_timer - This definition defines local timer structure
+ * struct xttcps_timer - This definition defines local timer structure
  *
  * @base_addr:	Base address of timer
  **/
-struct xttcpss_timer {
+struct xttcps_timer {
 	void __iomem	*base_addr;
 };
 
-struct xttcpss_timer_clocksource {
-	struct xttcpss_timer	xttc;
+struct xttcps_timer_clocksource {
+	struct xttcps_timer	xttc;
 	struct clocksource	cs;
 };
 
-#define to_xttcpss_timer_clksrc(x) \
-		container_of(x, struct xttcpss_timer_clocksource, cs)
+#define to_xttcps_timer_clksrc(x) \
+		container_of(x, struct xttcps_timer_clocksource, cs)
 
-struct xttcpss_timer_clockevent {
-	struct xttcpss_timer		xttc;
+struct xttcps_timer_clockevent {
+	struct xttcps_timer		xttc;
 	struct clock_event_device	ce;
 	struct clk			*clk;
 };
 
-#define to_xttcpss_timer_clkevent(x) \
-		container_of(x, struct xttcpss_timer_clockevent, ce)
+#define to_xttcps_timer_clkevent(x) \
+		container_of(x, struct xttcps_timer_clockevent, ce)
 
 /**
- * xttcpss_set_interval - Set the timer interval value
+ * xttcps_set_interval - Set the timer interval value
  *
  * @timer:	Pointer to the timer instance
  * @cycles:	Timer interval ticks
  **/
-static void xttcpss_set_interval(struct xttcpss_timer *timer,
+static void xttcps_set_interval(struct xttcps_timer *timer,
 					unsigned long cycles)
 {
 	u32 ctrl_reg;
 
 	/* Disable the counter, set the counter value  and re-enable counter */
-	ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
-	ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
-	__raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+	ctrl_reg = __raw_readl(timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
+	ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
+	__raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 
-	__raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET);
+	__raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET);
 
-	/* Reset the counter (0x10) so that it starts from 0, one-shot
-	   mode makes this needed for timing to be right. */
+	/*
+	 * Reset the counter (0x10) so that it starts from 0, one-shot
+	 * mode makes this needed for timing to be right.
+	 */
 	ctrl_reg |= CNT_CNTRL_RESET;
-	ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
-	__raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+	ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
+	__raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 }
 
 /**
- * xttcpss_clock_event_interrupt - Clock event timer interrupt handler
+ * xttcps_clock_event_interrupt - Clock event timer interrupt handler
  *
  * @irq:	IRQ number of the Timer
- * @dev_id:	void pointer to the xttcpss_timer instance
+ * @dev_id:	void pointer to the xttcps_timer instance
  *
  * returns: Always IRQ_HANDLED - success
  **/
-static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
+static irqreturn_t xttcps_clock_event_interrupt(int irq, void *dev_id)
 {
-	struct xttcpss_timer_clockevent *xttce = dev_id;
-	struct xttcpss_timer *timer = &xttce->xttc;
+	struct xttcps_timer_clockevent *xttce = dev_id;
+	struct xttcps_timer *timer = &xttce->xttc;
 
 	/* Acknowledge the interrupt and call event handler */
-	__raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET),
-			timer->base_addr + XTTCPSS_ISR_OFFSET);
+	__raw_readl(timer->base_addr + XTTCPS_ISR_OFFSET);
 
 	xttce->ce.event_handler(&xttce->ce);
 
@@ -136,46 +127,46 @@ static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id)
  **/
 static cycle_t __xttc_clocksource_read(struct clocksource *cs)
 {
-	struct xttcpss_timer *timer = &to_xttcpss_timer_clksrc(cs)->xttc;
+	struct xttcps_timer *timer = &to_xttcps_timer_clksrc(cs)->xttc;
 
 	return (cycle_t)__raw_readl(timer->base_addr +
-				XTTCPSS_COUNT_VAL_OFFSET);
+				XTTCPS_COUNT_VAL_OFFSET);
 }
 
 /**
- * xttcpss_set_next_event - Sets the time interval for next event
+ * xttcps_set_next_event - Sets the time interval for next event
  *
  * @cycles:	Timer interval ticks
  * @evt:	Address of clock event instance
  *
  * returns: Always 0 - success
  **/
-static int xttcpss_set_next_event(unsigned long cycles,
+static int xttcps_set_next_event(unsigned long cycles,
 					struct clock_event_device *evt)
 {
-	struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt);
-	struct xttcpss_timer *timer = &xttce->xttc;
+	struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
+	struct xttcps_timer *timer = &xttce->xttc;
 
-	xttcpss_set_interval(timer, cycles);
+	xttcps_set_interval(timer, cycles);
 	return 0;
 }
 
 /**
- * xttcpss_set_mode - Sets the mode of timer
+ * xttcps_set_mode - Sets the mode of timer
  *
  * @mode:	Mode to be set
  * @evt:	Address of clock event instance
  **/
-static void xttcpss_set_mode(enum clock_event_mode mode,
+static void xttcps_set_mode(enum clock_event_mode mode,
 					struct clock_event_device *evt)
 {
-	struct xttcpss_timer_clockevent *xttce = to_xttcpss_timer_clkevent(evt);
-	struct xttcpss_timer *timer = &xttce->xttc;
+	struct xttcps_timer_clockevent *xttce = to_xttcps_timer_clkevent(evt);
+	struct xttcps_timer *timer = &xttce->xttc;
 	u32 ctrl_reg;
 
 	switch (mode) {
 	case CLOCK_EVT_MODE_PERIODIC:
-		xttcpss_set_interval(timer,
+		xttcps_set_interval(timer,
 				     DIV_ROUND_CLOSEST(clk_get_rate(xttce->clk),
 						       PRESCALE * HZ));
 		break;
@@ -183,17 +174,17 @@ static void xttcpss_set_mode(enum clock_event_mode mode,
 	case CLOCK_EVT_MODE_UNUSED:
 	case CLOCK_EVT_MODE_SHUTDOWN:
 		ctrl_reg = __raw_readl(timer->base_addr +
-					XTTCPSS_CNT_CNTRL_OFFSET);
-		ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+					XTTCPS_CNT_CNTRL_OFFSET);
+		ctrl_reg |= XTTCPS_CNT_CNTRL_DISABLE_MASK;
 		__raw_writel(ctrl_reg,
-				timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+				timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 		break;
 	case CLOCK_EVT_MODE_RESUME:
 		ctrl_reg = __raw_readl(timer->base_addr +
-					XTTCPSS_CNT_CNTRL_OFFSET);
-		ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK;
+					XTTCPS_CNT_CNTRL_OFFSET);
+		ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK;
 		__raw_writel(ctrl_reg,
-				timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+				timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 		break;
 	}
 }
@@ -201,7 +192,7 @@ static void xttcpss_set_mode(enum clock_event_mode mode,
 static void __init zynq_ttc_setup_clocksource(struct device_node *np,
 					     void __iomem *base)
 {
-	struct xttcpss_timer_clocksource *ttccs;
+	struct xttcps_timer_clocksource *ttccs;
 	struct clk *clk;
 	int err;
 	u32 reg;
@@ -230,11 +221,11 @@ static void __init zynq_ttc_setup_clocksource(struct device_node *np,
 	ttccs->cs.mask = CLOCKSOURCE_MASK(16);
 	ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS;
 
-	__raw_writel(0x0,  ttccs->xttc.base_addr + XTTCPSS_IER_OFFSET);
+	__raw_writel(0x0,  ttccs->xttc.base_addr + XTTCPS_IER_OFFSET);
 	__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
-		     ttccs->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET);
+		     ttccs->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
 	__raw_writel(CNT_CNTRL_RESET,
-		     ttccs->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+		     ttccs->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 
 	err = clocksource_register_hz(&ttccs->cs, clk_get_rate(clk) / PRESCALE);
 	if (WARN_ON(err))
@@ -244,7 +235,7 @@ static void __init zynq_ttc_setup_clocksource(struct device_node *np,
 static void __init zynq_ttc_setup_clockevent(struct device_node *np,
 					    void __iomem *base)
 {
-	struct xttcpss_timer_clockevent *ttcce;
+	struct xttcps_timer_clockevent *ttcce;
 	int err, irq;
 	u32 reg;
 
@@ -272,17 +263,18 @@ static void __init zynq_ttc_setup_clockevent(struct device_node *np,
 
 	ttcce->ce.name = np->name;
 	ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	ttcce->ce.set_next_event = xttcpss_set_next_event;
-	ttcce->ce.set_mode = xttcpss_set_mode;
+	ttcce->ce.set_next_event = xttcps_set_next_event;
+	ttcce->ce.set_mode = xttcps_set_mode;
 	ttcce->ce.rating = 200;
 	ttcce->ce.irq = irq;
+	ttcce->ce.cpumask = cpu_possible_mask;
 
-	__raw_writel(0x23, ttcce->xttc.base_addr + XTTCPSS_CNT_CNTRL_OFFSET);
+	__raw_writel(0x23, ttcce->xttc.base_addr + XTTCPS_CNT_CNTRL_OFFSET);
 	__raw_writel(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN,
-		     ttcce->xttc.base_addr + XTTCPSS_CLK_CNTRL_OFFSET);
-	__raw_writel(0x1,  ttcce->xttc.base_addr + XTTCPSS_IER_OFFSET);
+		     ttcce->xttc.base_addr + XTTCPS_CLK_CNTRL_OFFSET);
+	__raw_writel(0x1,  ttcce->xttc.base_addr + XTTCPS_IER_OFFSET);
 
-	err = request_irq(irq, xttcpss_clock_event_interrupt, IRQF_TIMER,
+	err = request_irq(irq, xttcps_clock_event_interrupt, IRQF_TIMER,
 			  np->name, ttcce);
 	if (WARN_ON(err))
 		return;
@@ -301,12 +293,12 @@ static const __initconst struct of_device_id zynq_ttc_match[] = {
 };
 
 /**
- * xttcpss_timer_init - Initialize the timer
+ * xttcps_timer_init - Initialize the timer
  *
  * Initializes the timer hardware and register the clock source and clock event
  * timers with Linux kernal timer framework
  **/
-void __init xttcpss_timer_init(void)
+void __init xttcps_timer_init(void)
 {
 	struct device_node *np;