ARM: imx: move platform_data definitions

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the imx include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Sascha Hauer <kernel@pengutronix.de>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Dan Williams <djbw@fb.com>
Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

20 files changed, 18 insertions, 748 deletions

diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
index 5955f5da82ee..3793e475cd95 100644
--- a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
+++ b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c
@@ -8,7 +8,7 @@
 
 #include <mach/hardware.h>
 #include <mach/devices-common.h>
-#include <mach/esdhc.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
 
 #define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \
 	{								\
diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h
index a7f5bb1084d7..9e3e3d8ae8c2 100644
--- a/arch/arm/plat-mxc/include/mach/devices-common.h
+++ b/arch/arm/plat-mxc/include/mach/devices-common.h
@@ -9,7 +9,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/init.h>
-#include <mach/sdma.h>
+#include <linux/platform_data/dma-imx-sdma.h>
 
 extern struct device mxc_aips_bus;
 extern struct device mxc_ahb_bus;
@@ -74,7 +74,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
 struct platform_device *__init imx_add_gpio_keys(
 		const struct gpio_keys_platform_data *pdata);
 
-#include <mach/mx21-usbhost.h>
+#include <linux/platform_data/usb-mx2.h>
 struct imx_imx21_hcd_data {
 	resource_size_t iobase;
 	resource_size_t irq;
@@ -98,7 +98,7 @@ struct imx_imxdi_rtc_data {
 struct platform_device *__init imx_add_imxdi_rtc(
 		const struct imx_imxdi_rtc_data *data);
 
-#include <mach/imxfb.h>
+#include <linux/platform_data/video-imxfb.h>
 struct imx_imx_fb_data {
 	resource_size_t iobase;
 	resource_size_t iosize;
@@ -108,7 +108,7 @@ struct platform_device *__init imx_add_imx_fb(
 		const struct imx_imx_fb_data *data,
 		const struct imx_fb_platform_data *pdata);
 
-#include <mach/i2c.h>
+#include <linux/platform_data/i2c-imx.h>
 struct imx_imx_i2c_data {
 	int id;
 	resource_size_t iobase;
@@ -129,7 +129,7 @@ struct platform_device *__init imx_add_imx_keypad(
 		const struct imx_imx_keypad_data *data,
 		const struct matrix_keymap_data *pdata);
 
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
 struct imx_imx_ssi_data {
 	int id;
 	resource_size_t iobase;
@@ -144,7 +144,7 @@ struct platform_device *__init imx_add_imx_ssi(
 		const struct imx_imx_ssi_data *data,
 		const struct imx_ssi_platform_data *pdata);
 
-#include <mach/imx-uart.h>
+#include <linux/platform_data/serial-imx.h>
 struct imx_imx_uart_3irq_data {
 	int id;
 	resource_size_t iobase;
@@ -167,7 +167,7 @@ struct platform_device *__init imx_add_imx_uart_1irq(
 		const struct imx_imx_uart_1irq_data *data,
 		const struct imxuart_platform_data *pdata);
 
-#include <mach/usb.h>
+#include <linux/platform_data/usb-imx_udc.h>
 struct imx_imx_udc_data {
 	resource_size_t iobase;
 	resource_size_t iosize;
@@ -183,8 +183,8 @@ struct platform_device *__init imx_add_imx_udc(
 		const struct imx_imx_udc_data *data,
 		const struct imxusb_platform_data *pdata);
 
-#include <mach/mx3fb.h>
-#include <mach/mx3_camera.h>
+#include <linux/platform_data/video-mx3fb.h>
+#include <linux/platform_data/camera-mx3.h>
 struct imx_ipu_core_data {
 	resource_size_t iobase;
 	resource_size_t synirq;
@@ -199,7 +199,7 @@ struct platform_device *__init imx_add_mx3_sdc_fb(
 		const struct imx_ipu_core_data *data,
 		struct mx3fb_platform_data *pdata);
 
-#include <mach/mx1_camera.h>
+#include <linux/platform_data/camera-mx1.h>
 struct imx_mx1_camera_data {
 	resource_size_t iobase;
 	resource_size_t iosize;
@@ -209,7 +209,7 @@ struct platform_device *__init imx_add_mx1_camera(
 		const struct imx_mx1_camera_data *data,
 		const struct mx1_camera_pdata *pdata);
 
-#include <mach/mx2_cam.h>
+#include <linux/platform_data/camera-mx2.h>
 struct imx_mx2_camera_data {
 	resource_size_t iobasecsi;
 	resource_size_t iosizecsi;
@@ -224,7 +224,7 @@ struct platform_device *__init imx_add_mx2_camera(
 struct platform_device *__init imx_add_mx2_emmaprp(
 		const struct imx_mx2_camera_data *data);
 
-#include <mach/mxc_ehci.h>
+#include <linux/platform_data/usb-ehci-mxc.h>
 struct imx_mxc_ehci_data {
 	int id;
 	resource_size_t iobase;
@@ -234,7 +234,7 @@ struct platform_device *__init imx_add_mxc_ehci(
 		const struct imx_mxc_ehci_data *data,
 		const struct mxc_usbh_platform_data *pdata);
 
-#include <mach/mmc.h>
+#include <linux/platform_data/mmc-mxcmmc.h>
 struct imx_mxc_mmc_data {
 	int id;
 	resource_size_t iobase;
@@ -246,7 +246,7 @@ struct platform_device *__init imx_add_mxc_mmc(
 		const struct imx_mxc_mmc_data *data,
 		const struct imxmmc_platform_data *pdata);
 
-#include <mach/mxc_nand.h>
+#include <linux/platform_data/mtd-mxc_nand.h>
 struct imx_mxc_nand_data {
 	/*
 	 * id is traditionally 0, but -1 is more appropriate.  We use -1 for new
@@ -295,7 +295,7 @@ struct imx_mxc_w1_data {
 struct platform_device *__init imx_add_mxc_w1(
 		const struct imx_mxc_w1_data *data);
 
-#include <mach/esdhc.h>
+#include <linux/platform_data/mmc-esdhc-imx.h>
 struct imx_sdhci_esdhc_imx_data {
 	const char *devid;
 	int id;
@@ -306,7 +306,7 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx(
 		const struct imx_sdhci_esdhc_imx_data *data,
 		const struct esdhc_platform_data *pdata);
 
-#include <mach/spi.h>
+#include <linux/platform_data/spi-imx.h>
 struct imx_spi_imx_data {
 	const char *devid;
 	int id;
diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h
deleted file mode 100644
index 1b9080385b46..000000000000
--- a/arch/arm/plat-mxc/include/mach/dma.h
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MXC_DMA_H__
-#define __ASM_ARCH_MXC_DMA_H__
-
-#include <linux/scatterlist.h>
-#include <linux/device.h>
-#include <linux/dmaengine.h>
-
-/*
- * This enumerates peripheral types. Used for SDMA.
- */
-enum sdma_peripheral_type {
-	IMX_DMATYPE_SSI,	/* MCU domain SSI */
-	IMX_DMATYPE_SSI_SP,	/* Shared SSI */
-	IMX_DMATYPE_MMC,	/* MMC */
-	IMX_DMATYPE_SDHC,	/* SDHC */
-	IMX_DMATYPE_UART,	/* MCU domain UART */
-	IMX_DMATYPE_UART_SP,	/* Shared UART */
-	IMX_DMATYPE_FIRI,	/* FIRI */
-	IMX_DMATYPE_CSPI,	/* MCU domain CSPI */
-	IMX_DMATYPE_CSPI_SP,	/* Shared CSPI */
-	IMX_DMATYPE_SIM,	/* SIM */
-	IMX_DMATYPE_ATA,	/* ATA */
-	IMX_DMATYPE_CCM,	/* CCM */
-	IMX_DMATYPE_EXT,	/* External peripheral */
-	IMX_DMATYPE_MSHC,	/* Memory Stick Host Controller */
-	IMX_DMATYPE_MSHC_SP,	/* Shared Memory Stick Host Controller */
-	IMX_DMATYPE_DSP,	/* DSP */
-	IMX_DMATYPE_MEMORY,	/* Memory */
-	IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */
-	IMX_DMATYPE_SPDIF,	/* SPDIF */
-	IMX_DMATYPE_IPU_MEMORY,	/* IPU Memory */
-	IMX_DMATYPE_ASRC,	/* ASRC */
-	IMX_DMATYPE_ESAI,	/* ESAI */
-};
-
-enum imx_dma_prio {
-	DMA_PRIO_HIGH = 0,
-	DMA_PRIO_MEDIUM = 1,
-	DMA_PRIO_LOW = 2
-};
-
-struct imx_dma_data {
-	int dma_request; /* DMA request line */
-	enum sdma_peripheral_type peripheral_type;
-	int priority;
-};
-
-static inline int imx_dma_is_ipu(struct dma_chan *chan)
-{
-	return !strcmp(dev_name(chan->device->dev), "ipu-core");
-}
-
-static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
-{
-	return strstr(dev_name(chan->device->dev), "sdma") ||
-		!strcmp(dev_name(chan->device->dev), "imx-dma");
-}
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h
deleted file mode 100644
index aaf97481f413..000000000000
--- a/arch/arm/plat-mxc/include/mach/esdhc.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; version 2
- * of the License.
- */
-
-#ifndef __ASM_ARCH_IMX_ESDHC_H
-#define __ASM_ARCH_IMX_ESDHC_H
-
-enum wp_types {
-	ESDHC_WP_NONE,		/* no WP, neither controller nor gpio */
-	ESDHC_WP_CONTROLLER,	/* mmc controller internal WP */
-	ESDHC_WP_GPIO,		/* external gpio pin for WP */
-};
-
-enum cd_types {
-	ESDHC_CD_NONE,		/* no CD, neither controller nor gpio */
-	ESDHC_CD_CONTROLLER,	/* mmc controller internal CD */
-	ESDHC_CD_GPIO,		/* external gpio pin for CD */
-	ESDHC_CD_PERMANENT,	/* no CD, card permanently wired to host */
-};
-
-/**
- * struct esdhc_platform_data - platform data for esdhc on i.MX
- *
- * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
- *
- * @wp_gpio:	gpio for write_protect
- * @cd_gpio:	gpio for card_detect interrupt
- * @wp_type:	type of write_protect method (see wp_types enum above)
- * @cd_type:	type of card_detect method (see cd_types enum above)
- */
-
-struct esdhc_platform_data {
-	unsigned int wp_gpio;
-	unsigned int cd_gpio;
-	enum wp_types wp_type;
-	enum cd_types cd_type;
-};
-#endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/arch/arm/plat-mxc/include/mach/i2c.h b/arch/arm/plat-mxc/include/mach/i2c.h
deleted file mode 100644
index 8289d915e615..000000000000
--- a/arch/arm/plat-mxc/include/mach/i2c.h
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- * i2c.h - i.MX I2C driver header file
- *
- * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com>
- *
- * This file is released under the GPLv2
- */
-
-#ifndef __ASM_ARCH_I2C_H_
-#define __ASM_ARCH_I2C_H_
-
-/**
- * struct imxi2c_platform_data - structure of platform data for MXC I2C driver
- * @bitrate:	Bus speed measured in Hz
- *
- **/
-struct imxi2c_platform_data {
-	u32 bitrate;
-};
-
-#endif /* __ASM_ARCH_I2C_H_ */
diff --git a/arch/arm/plat-mxc/include/mach/imx-uart.h b/arch/arm/plat-mxc/include/mach/imx-uart.h
deleted file mode 100644
index 4adec9b154dd..000000000000
--- a/arch/arm/plat-mxc/include/mach/imx-uart.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef ASMARM_ARCH_UART_H
-#define ASMARM_ARCH_UART_H
-
-#define IMXUART_HAVE_RTSCTS (1<<0)
-#define IMXUART_IRDA        (1<<1)
-
-struct imxuart_platform_data {
-	int (*init)(struct platform_device *pdev);
-	void (*exit)(struct platform_device *pdev);
-	unsigned int flags;
-	void (*irda_enable)(int enable);
-	unsigned int irda_inv_rx:1;
-	unsigned int irda_inv_tx:1;
-	unsigned short transceiver_delay;
-};
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/imxfb.h b/arch/arm/plat-mxc/include/mach/imxfb.h
deleted file mode 100644
index 9de8f062ad5d..000000000000
--- a/arch/arm/plat-mxc/include/mach/imxfb.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * This structure describes the machine which we are running on.
- */
-#ifndef __MACH_IMXFB_H__
-#define __MACH_IMXFB_H__
-
-#include <linux/fb.h>
-
-#define PCR_TFT		(1 << 31)
-#define PCR_COLOR	(1 << 30)
-#define PCR_PBSIZ_1	(0 << 28)
-#define PCR_PBSIZ_2	(1 << 28)
-#define PCR_PBSIZ_4	(2 << 28)
-#define PCR_PBSIZ_8	(3 << 28)
-#define PCR_BPIX_1	(0 << 25)
-#define PCR_BPIX_2	(1 << 25)
-#define PCR_BPIX_4	(2 << 25)
-#define PCR_BPIX_8	(3 << 25)
-#define PCR_BPIX_12	(4 << 25)
-#define PCR_BPIX_16	(5 << 25)
-#define PCR_BPIX_18	(6 << 25)
-#define PCR_PIXPOL	(1 << 24)
-#define PCR_FLMPOL	(1 << 23)
-#define PCR_LPPOL	(1 << 22)
-#define PCR_CLKPOL	(1 << 21)
-#define PCR_OEPOL	(1 << 20)
-#define PCR_SCLKIDLE	(1 << 19)
-#define PCR_END_SEL	(1 << 18)
-#define PCR_END_BYTE_SWAP (1 << 17)
-#define PCR_REV_VS	(1 << 16)
-#define PCR_ACD_SEL	(1 << 15)
-#define PCR_ACD(x)	(((x) & 0x7f) << 8)
-#define PCR_SCLK_SEL	(1 << 7)
-#define PCR_SHARP	(1 << 6)
-#define PCR_PCD(x)	((x) & 0x3f)
-
-#define PWMR_CLS(x)	(((x) & 0x1ff) << 16)
-#define PWMR_LDMSK	(1 << 15)
-#define PWMR_SCR1	(1 << 10)
-#define PWMR_SCR0	(1 << 9)
-#define PWMR_CC_EN	(1 << 8)
-#define PWMR_PW(x)	((x) & 0xff)
-
-#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
-#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
-#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
-#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
-#define LSCR1_GRAY1(x)            (((x) & 0xf))
-
-#define DMACR_BURST	(1 << 31)
-#define DMACR_HM(x)	(((x) & 0xf) << 16)
-#define DMACR_TM(x)	((x) & 0xf)
-
-struct imx_fb_videomode {
-	struct fb_videomode mode;
-	u32 pcr;
-	unsigned char	bpp;
-};
-
-struct imx_fb_platform_data {
-	struct imx_fb_videomode *mode;
-	int		num_modes;
-
-	u_int		cmap_greyscale:1,
-			cmap_inverse:1,
-			cmap_static:1,
-			unused:29;
-
-	u_int		pwmr;
-	u_int		lscr1;
-	u_int		dmacr;
-
-	u_char * fixed_screen_cpu;
-	dma_addr_t fixed_screen_dma;
-
-	int (*init)(struct platform_device *);
-	void (*exit)(struct platform_device *);
-
-	void (*lcd_power)(int);
-	void (*backlight_power)(int);
-};
-
-void set_imx_fb_info(struct imx_fb_platform_data *);
-#endif /* ifndef __MACH_IMXFB_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mmc.h b/arch/arm/plat-mxc/include/mach/mmc.h
deleted file mode 100644
index 29115f405af9..000000000000
--- a/arch/arm/plat-mxc/include/mach/mmc.h
+++ /dev/null
@@ -1,39 +0,0 @@
-#ifndef ASMARM_ARCH_MMC_H
-#define ASMARM_ARCH_MMC_H
-
-#include <linux/mmc/host.h>
-
-struct device;
-
-/* board specific SDHC data, optional.
- * If not present, a writable card with 3,3V is assumed.
- */
-struct imxmmc_platform_data {
-	/* Return values for the get_ro callback should be:
-	 *   0 for a read/write card
-	 *   1 for a read-only card
-	 *   -ENOSYS when not supported (equal to NULL callback)
-	 *   or a negative errno value when something bad happened
-	 */
-	int (*get_ro)(struct device *);
-
-	/* board specific hook to (de)initialize the SD slot.
-	 * The board code can call 'handler' on a card detection
-	 * change giving data as argument.
-	 */
-	int (*init)(struct device *dev, irq_handler_t handler, void *data);
-	void (*exit)(struct device *dev, void *data);
-
-	/* available voltages. If not given, assume
-	 * MMC_VDD_32_33 | MMC_VDD_33_34
-	 */
-	unsigned int ocr_avail;
-
-	/* adjust slot voltage */
-	void (*setpower)(struct device *, unsigned int vdd);
-
-	/* enable card detect using DAT3 */
-	int dat3_card_detect;
-};
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx1_camera.h b/arch/arm/plat-mxc/include/mach/mx1_camera.h
deleted file mode 100644
index 4fd6c70314b4..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx1_camera.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * mx1_camera.h - i.MX1/i.MXL camera driver header file
- *
- * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
- * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
- *
- * Based on PXA camera.h file:
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_CAMERA_H_
-#define __ASM_ARCH_CAMERA_H_
-
-#define MX1_CAMERA_DATA_HIGH	1
-#define MX1_CAMERA_PCLK_RISING	2
-#define MX1_CAMERA_VSYNC_HIGH	4
-
-extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end;
-
-/**
- * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data
- * @mclk_10khz:	master clock frequency in 10kHz units
- * @flags:	MX1 camera platform flags
- */
-struct mx1_camera_pdata {
-	unsigned long mclk_10khz;
-	unsigned long flags;
-};
-
-#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/arch/arm/plat-mxc/include/mach/mx21-usbhost.h b/arch/arm/plat-mxc/include/mach/mx21-usbhost.h
deleted file mode 100644
index 22d0b596262c..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx21-usbhost.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- *	Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MX21_USBH
-#define __ASM_ARCH_MX21_USBH
-
-enum mx21_usbh_xcvr {
-	/* Values below as used by hardware (HWMODE register) */
-	MX21_USBXCVR_TXDIF_RXDIF = 0,
-	MX21_USBXCVR_TXDIF_RXSE = 1,
-	MX21_USBXCVR_TXSE_RXDIF = 2,
-	MX21_USBXCVR_TXSE_RXSE = 3,
-};
-
-struct mx21_usbh_platform_data {
-	enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */
-	enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */
-	u16 	enable_host1:1,
-		enable_host2:1,
-		enable_otg_host:1, /* enable "OTG" port (as host) */
-		host1_xcverless:1, /* traceiverless host1 port */
-		host1_txenoe:1, /* output enable host1 transmit enable */
-		otg_ext_xcvr:1, /* external tranceiver for OTG port */
-		unused:10;
-};
-
-#endif /* __ASM_ARCH_MX21_USBH */
diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h
deleted file mode 100644
index 3c080a32dbf5..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx2_cam.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * mx2-cam.h - i.MX27/i.MX25 camera driver header file
- *
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
- * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#ifndef __MACH_MX2_CAM_H_
-#define __MACH_MX2_CAM_H_
-
-#define MX2_CAMERA_SWAP16		(1 << 0)
-#define MX2_CAMERA_EXT_VSYNC		(1 << 1)
-#define MX2_CAMERA_CCIR			(1 << 2)
-#define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
-#define MX2_CAMERA_HSYNC_HIGH		(1 << 4)
-#define MX2_CAMERA_GATED_CLOCK		(1 << 5)
-#define MX2_CAMERA_INV_DATA		(1 << 6)
-#define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
-#define MX2_CAMERA_PACK_DIR_MSB		(1 << 8)
-
-/**
- * struct mx2_camera_platform_data - optional platform data for mx2_camera
- * @flags: any combination of MX2_CAMERA_*
- * @clk: clock rate of the csi block / 2
- */
-struct mx2_camera_platform_data {
-	unsigned long flags;
-	unsigned long clk;
-};
-
-#endif /* __MACH_MX2_CAM_H_ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3_camera.h b/arch/arm/plat-mxc/include/mach/mx3_camera.h
deleted file mode 100644
index f226ee3777e1..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx3_camera.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * mx3_camera.h - i.MX3x camera driver header file
- *
- * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _MX3_CAMERA_H_
-#define _MX3_CAMERA_H_
-
-#include <linux/device.h>
-
-#define MX3_CAMERA_CLK_SRC	1
-#define MX3_CAMERA_EXT_VSYNC	2
-#define MX3_CAMERA_DP		4
-#define MX3_CAMERA_PCP		8
-#define MX3_CAMERA_HSP		0x10
-#define MX3_CAMERA_VSP		0x20
-#define MX3_CAMERA_DATAWIDTH_4	0x40
-#define MX3_CAMERA_DATAWIDTH_8	0x80
-#define MX3_CAMERA_DATAWIDTH_10	0x100
-#define MX3_CAMERA_DATAWIDTH_15	0x200
-
-#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \
-				   MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15)
-
-/**
- * struct mx3_camera_pdata - i.MX3x camera platform data
- * @flags:	MX3_CAMERA_* flags
- * @mclk_10khz:	master clock frequency in 10kHz units
- * @dma_dev:	IPU DMA device to match against in channel allocation
- */
-struct mx3_camera_pdata {
-	unsigned long flags;
-	unsigned long mclk_10khz;
-	struct device *dma_dev;
-};
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h
deleted file mode 100644
index fdbe60001542..000000000000
--- a/arch/arm/plat-mxc/include/mach/mx3fb.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * Copyright (C) 2008
- * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_MX3FB_H__
-#define __ASM_ARCH_MX3FB_H__
-
-#include <linux/device.h>
-#include <linux/fb.h>
-
-/* Proprietary FB_SYNC_ flags */
-#define FB_SYNC_OE_ACT_HIGH	0x80000000
-#define FB_SYNC_CLK_INVERT	0x40000000
-#define FB_SYNC_DATA_INVERT	0x20000000
-#define FB_SYNC_CLK_IDLE_EN	0x10000000
-#define FB_SYNC_SHARP_MODE	0x08000000
-#define FB_SYNC_SWAP_RGB	0x04000000
-#define FB_SYNC_CLK_SEL_EN	0x02000000
-
-/*
- * Specify the way your display is connected. The IPU can arbitrarily
- * map the internal colors to the external data lines. We only support
- * the following mappings at the moment.
- */
-enum disp_data_mapping {
-	/* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */
-	IPU_DISP_DATA_MAPPING_RGB666,
-	/* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */
-	IPU_DISP_DATA_MAPPING_RGB565,
-	/* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */
-	IPU_DISP_DATA_MAPPING_RGB888,
-};
-
-/**
- * struct mx3fb_platform_data - mx3fb platform data
- *
- * @dma_dev:	pointer to the dma-device, used for dma-slave connection
- * @mode:	pointer to a platform-provided per mxc_register_fb() videomode
- */
-struct mx3fb_platform_data {
-	struct device			*dma_dev;
-	const char			*name;
-	const struct fb_videomode	*mode;
-	int				num_modes;
-	enum disp_data_mapping		disp_data_fmt;
-};
-
-#endif
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
deleted file mode 100644
index 7eb9d1329671..000000000000
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
-#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
-
-/* values for portsc field */
-#define MXC_EHCI_PHY_LOW_POWER_SUSPEND	(1 << 23)
-#define MXC_EHCI_FORCE_FS		(1 << 24)
-#define MXC_EHCI_UTMI_8BIT		(0 << 28)
-#define MXC_EHCI_UTMI_16BIT		(1 << 28)
-#define MXC_EHCI_SERIAL			(1 << 29)
-#define MXC_EHCI_MODE_UTMI		(0 << 30)
-#define MXC_EHCI_MODE_PHILIPS		(1 << 30)
-#define MXC_EHCI_MODE_ULPI		(2 << 30)
-#define MXC_EHCI_MODE_SERIAL		(3 << 30)
-
-/* values for flags field */
-#define MXC_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
-#define MXC_EHCI_INTERFACE_DIFF_BI	(1 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
-#define MXC_EHCI_INTERFACE_SINGLE_BI	(3 << 0)
-#define MXC_EHCI_INTERFACE_MASK		(0xf)
-
-#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
-#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH	(1 << 6)
-#define MXC_EHCI_OC_PIN_ACTIVE_LOW	(1 << 7)
-#define MXC_EHCI_TTL_ENABLED		(1 << 8)
-
-#define MXC_EHCI_INTERNAL_PHY		(1 << 9)
-#define MXC_EHCI_IPPUE_DOWN		(1 << 10)
-#define MXC_EHCI_IPPUE_UP		(1 << 11)
-#define MXC_EHCI_WAKEUP_ENABLED		(1 << 12)
-#define MXC_EHCI_ITC_NO_THRESHOLD	(1 << 13)
-
-#define MXC_USBCTRL_OFFSET		0
-#define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
-#define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
-#define MXC_USBH2CTRL_OFFSET		0x14
-
-#define MX5_USBOTHER_REGS_OFFSET	0x800
-
-/* USB_PHY_CTRL_FUNC2*/
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK		0x3
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT		0
-
-struct mxc_usbh_platform_data {
-	int (*init)(struct platform_device *pdev);
-	int (*exit)(struct platform_device *pdev);
-
-	unsigned int		 portsc;
-	struct usb_phy		*otg;
-};
-
-int mx51_initialize_usb_hw(int port, unsigned int flags);
-int mx25_initialize_usb_hw(int port, unsigned int flags);
-int mx31_initialize_usb_hw(int port, unsigned int flags);
-int mx35_initialize_usb_hw(int port, unsigned int flags);
-int mx27_initialize_usb_hw(int port, unsigned int flags);
-
-#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
-
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
deleted file mode 100644
index 6bb96ef1600b..000000000000
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#ifndef __ASM_ARCH_NAND_H
-#define __ASM_ARCH_NAND_H
-
-#include <linux/mtd/partitions.h>
-
-struct mxc_nand_platform_data {
-	unsigned int width;	/* data bus width in bytes */
-	unsigned int hw_ecc:1;	/* 0 if suppress hardware ECC */
-	unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
-	struct mtd_partition *parts;	/* partition table */
-	int nr_parts;			/* size of parts */
-};
-#endif /* __ASM_ARCH_NAND_H */
diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h
deleted file mode 100644
index 3a3942823c20..000000000000
--- a/arch/arm/plat-mxc/include/mach/sdma.h
+++ /dev/null
@@ -1,59 +0,0 @@
-#ifndef __MACH_MXC_SDMA_H__
-#define __MACH_MXC_SDMA_H__
-
-/**
- * struct sdma_script_start_addrs - SDMA script start pointers
- *
- * start addresses of the different functions in the physical
- * address space of the SDMA engine.
- */
-struct sdma_script_start_addrs {
-	s32 ap_2_ap_addr;
-	s32 ap_2_bp_addr;
-	s32 ap_2_ap_fixed_addr;
-	s32 bp_2_ap_addr;
-	s32 loopback_on_dsp_side_addr;
-	s32 mcu_interrupt_only_addr;
-	s32 firi_2_per_addr;
-	s32 firi_2_mcu_addr;
-	s32 per_2_firi_addr;
-	s32 mcu_2_firi_addr;
-	s32 uart_2_per_addr;
-	s32 uart_2_mcu_addr;
-	s32 per_2_app_addr;
-	s32 mcu_2_app_addr;
-	s32 per_2_per_addr;
-	s32 uartsh_2_per_addr;
-	s32 uartsh_2_mcu_addr;
-	s32 per_2_shp_addr;
-	s32 mcu_2_shp_addr;
-	s32 ata_2_mcu_addr;
-	s32 mcu_2_ata_addr;
-	s32 app_2_per_addr;
-	s32 app_2_mcu_addr;
-	s32 shp_2_per_addr;
-	s32 shp_2_mcu_addr;
-	s32 mshc_2_mcu_addr;
-	s32 mcu_2_mshc_addr;
-	s32 spdif_2_mcu_addr;
-	s32 mcu_2_spdif_addr;
-	s32 asrc_2_mcu_addr;
-	s32 ext_mem_2_ipu_addr;
-	s32 descrambler_addr;
-	s32 dptc_dvfs_addr;
-	s32 utra_addr;
-	s32 ram_code_start_addr;
-};
-
-/**
- * struct sdma_platform_data - platform specific data for SDMA engine
- *
- * @fw_name		The firmware name
- * @script_addrs	SDMA scripts addresses in SDMA ROM
- */
-struct sdma_platform_data {
-	char *fw_name;
-	struct sdma_script_start_addrs *script_addrs;
-};
-
-#endif /* __MACH_MXC_SDMA_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/spi.h b/arch/arm/plat-mxc/include/mach/spi.h
deleted file mode 100644
index 08be445e8eb8..000000000000
--- a/arch/arm/plat-mxc/include/mach/spi.h
+++ /dev/null
@@ -1,27 +0,0 @@
-
-#ifndef __MACH_SPI_H_
-#define __MACH_SPI_H_
-
-/*
- * struct spi_imx_master - device.platform_data for SPI controller devices.
- * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
- *              pins, numbers < 0 mean internal CSPI chipselects according
- *              to MXC_SPI_CS(). Normally you want to use gpio based chip
- *              selects as the CSPI module tries to be intelligent about
- *              when to assert the chipselect: The CSPI module deasserts the
- *              chipselect once it runs out of input data. The other problem
- *              is that it is not possible to mix between high active and low
- *              active chipselects on one single bus using the internal
- *              chipselects. Unfortunately Freescale decided to put some
- *              chipselects on dedicated pins which are not usable as gpios,
- *              so we have to support the internal chipselects.
- * @num_chipselect: ARRAY_SIZE(chipselect)
- */
-struct spi_imx_master {
-	int	*chipselect;
-	int	num_chipselect;
-};
-
-#define MXC_SPI_CS(no)	((no) - 32)
-
-#endif /* __MACH_SPI_H_*/
diff --git a/arch/arm/plat-mxc/include/mach/ssi.h b/arch/arm/plat-mxc/include/mach/ssi.h
deleted file mode 100644
index 63f3c2804239..000000000000
--- a/arch/arm/plat-mxc/include/mach/ssi.h
+++ /dev/null
@@ -1,21 +0,0 @@
-#ifndef __MACH_SSI_H
-#define __MACH_SSI_H
-
-struct snd_ac97;
-
-extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
-extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
-
-struct imx_ssi_platform_data {
-	unsigned int flags;
-#define IMX_SSI_DMA            (1 << 0)
-#define IMX_SSI_USE_AC97       (1 << 1)
-#define IMX_SSI_NET            (1 << 2)
-#define IMX_SSI_SYN            (1 << 3)
-#define IMX_SSI_USE_I2S_SLAVE  (1 << 4)
-	void (*ac97_reset) (struct snd_ac97 *ac97);
-	void (*ac97_warm_reset)(struct snd_ac97 *ac97);
-};
-
-#endif /* __MACH_SSI_H */
-
diff --git a/arch/arm/plat-mxc/include/mach/usb.h b/arch/arm/plat-mxc/include/mach/usb.h
deleted file mode 100644
index be273371f34a..000000000000
--- a/arch/arm/plat-mxc/include/mach/usb.h
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *	Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
- *
- *	This program is free software; you can redistribute it and/or modify
- *	it under the terms of the GNU General Public License as published by
- *	the Free Software Foundation; either version 2 of the License, or
- *	(at your option) any later version.
- *
- *	This program is distributed in the hope that it will be useful,
- *	but WITHOUT ANY WARRANTY; without even the implied warranty of
- *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *	GNU General Public License for more details.
- */
-
-#ifndef __ASM_ARCH_MXC_USB
-#define __ASM_ARCH_MXC_USB
-
-struct imxusb_platform_data {
-	int (*init)(struct device *);
-	void (*exit)(struct device *);
-};
-
-#endif /* __ASM_ARCH_MXC_USB */
diff --git a/arch/arm/plat-mxc/ssi-fiq-ksym.c b/arch/arm/plat-mxc/ssi-fiq-ksym.c
index b5fad454da78..792090f9a032 100644
--- a/arch/arm/plat-mxc/ssi-fiq-ksym.c
+++ b/arch/arm/plat-mxc/ssi-fiq-ksym.c
@@ -10,7 +10,7 @@
 
 #include <linux/module.h>
 
-#include <mach/ssi.h>
+#include <linux/platform_data/asoc-imx-ssi.h>
 
 EXPORT_SYMBOL(imx_ssi_fiq_tx_buffer);
 EXPORT_SYMBOL(imx_ssi_fiq_rx_buffer);