ARM: mach-omap1: retire custom LED code

Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Acked-by: Tony Lindgren <tony@atomide.com>

1 files changed, 67 insertions, 226 deletions

diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 39407cbe34c6..24e23f3dd6a8 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -1,279 +1,118 @@
 /*
  * linux/arch/arm/plat-omap/debug-leds.c
  *
+ * Copyright 2011 by Bryan Wu <bryan.wu@canonical.com>
  * Copyright 2003 by Texas Instruments Incorporated
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#include <linux/gpio.h>
+
+#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/leds.h>
 #include <linux/io.h>
+#include <linux/slab.h>
 
 #include <mach/hardware.h>
-#include <asm/leds.h>
 #include <asm/mach-types.h>
 
 #include <plat/fpga.h>
 
-
 /* Many OMAP development platforms reuse the same "debug board"; these
  * platforms include H2, H3, H4, and Perseus2.  There are 16 LEDs on the
  * debug board (all green), accessed through FPGA registers.
- *
- * The "surfer" expansion board and H2 sample board also have two-color
- * green+red LEDs (in parallel), used here for timer and idle indicators
- * in preference to the ones on the debug board, for a "Disco LED" effect.
- *
- * This driver exports either the original ARM LED API, the new generic
- * one, or both.
- */
-
-static spinlock_t			lock;
-static struct h2p2_dbg_fpga __iomem	*fpga;
-static u16				led_state, hw_led_state;
-
-
-#ifdef	CONFIG_OMAP_DEBUG_LEDS
-#define new_led_api()	1
-#else
-#define new_led_api()	0
-#endif
-
-
-/*-------------------------------------------------------------------------*/
-
-/* original ARM debug LED API:
- *  - timer and idle leds (some boards use non-FPGA leds here);
- *  - up to 4 generic leds, easily accessed in-kernel (any context)
  */
 
-#define GPIO_LED_RED		3
-#define GPIO_LED_GREEN		OMAP_MPUIO(4)
-
-#define LED_STATE_ENABLED	0x01
-#define LED_STATE_CLAIMED	0x02
-#define LED_TIMER_ON		0x04
-
-#define GPIO_IDLE		GPIO_LED_GREEN
-#define GPIO_TIMER		GPIO_LED_RED
-
-static void h2p2_dbg_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&lock, flags);
-
-	if (!(led_state & LED_STATE_ENABLED) && evt != led_start)
-		goto done;
-
-	switch (evt) {
-	case led_start:
-		if (fpga)
-			led_state |= LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-	case led_halted:
-		/* all leds off during suspend or shutdown */
-
-		if (!(machine_is_omap_perseus2() || machine_is_omap_h4())) {
-			gpio_set_value(GPIO_TIMER, 0);
-			gpio_set_value(GPIO_IDLE, 0);
-		}
-
-		__raw_writew(~0, &fpga->leds);
-		led_state &= ~LED_STATE_ENABLED;
-		goto done;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		led_state ^= LED_TIMER_ON;
-
-		if (machine_is_omap_perseus2() || machine_is_omap_h4())
-			hw_led_state ^= H2P2_DBG_FPGA_P2_LED_TIMER;
-		else {
-			gpio_set_value(GPIO_TIMER,
-					led_state & LED_TIMER_ON);
-			goto done;
-		}
-
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	/* LED lit iff busy */
-	case led_idle_start:
-		if (machine_is_omap_perseus2() || machine_is_omap_h4())
-			hw_led_state &= ~H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 1);
-			goto done;
-		}
-
-		break;
+static struct h2p2_dbg_fpga __iomem *fpga;
 
-	case led_idle_end:
-		if (machine_is_omap_perseus2() || machine_is_omap_h4())
-			hw_led_state |= H2P2_DBG_FPGA_P2_LED_IDLE;
-		else {
-			gpio_set_value(GPIO_IDLE, 0);
-			goto done;
-		}
-
-		break;
-#endif
-
-	case led_green_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_GREEN;
-		break;
-	case led_green_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_GREEN;
-		break;
-
-	case led_amber_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_AMBER;
-		break;
-	case led_amber_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_AMBER;
-		break;
-
-	case led_red_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_RED;
-		break;
-	case led_red_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_RED;
-		break;
-
-	case led_blue_on:
-		hw_led_state |= H2P2_DBG_FPGA_LED_BLUE;
-		break;
-	case led_blue_off:
-		hw_led_state &= ~H2P2_DBG_FPGA_LED_BLUE;
-		break;
-
-	default:
-		break;
-	}
-
-
-	/*
-	 *  Actually burn the LEDs
-	 */
-	if (led_state & LED_STATE_ENABLED)
-		__raw_writew(~hw_led_state, &fpga->leds);
-
-done:
-	spin_unlock_irqrestore(&lock, flags);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* "new" LED API
- *  - with syfs access and generic triggering
- *  - not readily accessible to in-kernel drivers
- */
+static u16 fpga_led_state;
 
 struct dbg_led {
 	struct led_classdev	cdev;
 	u16			mask;
 };
 
-static struct dbg_led dbg_leds[] = {
-	/* REVISIT at least H2 uses different timer & cpu leds... */
-#ifndef CONFIG_LEDS_TIMER
-	{ .mask = 1 << 0,  .cdev.name =  "d4:green",
-		.cdev.default_trigger = "heartbeat", },
-#endif
-#ifndef CONFIG_LEDS_CPU
-	{ .mask = 1 << 1,  .cdev.name =  "d5:green", },		/* !idle */
-#endif
-	{ .mask = 1 << 2,  .cdev.name =  "d6:green", },
-	{ .mask = 1 << 3,  .cdev.name =  "d7:green", },
-
-	{ .mask = 1 << 4,  .cdev.name =  "d8:green", },
-	{ .mask = 1 << 5,  .cdev.name =  "d9:green", },
-	{ .mask = 1 << 6,  .cdev.name = "d10:green", },
-	{ .mask = 1 << 7,  .cdev.name = "d11:green", },
-
-	{ .mask = 1 << 8,  .cdev.name = "d12:green", },
-	{ .mask = 1 << 9,  .cdev.name = "d13:green", },
-	{ .mask = 1 << 10, .cdev.name = "d14:green", },
-	{ .mask = 1 << 11, .cdev.name = "d15:green", },
-
-#ifndef	CONFIG_LEDS
-	{ .mask = 1 << 12, .cdev.name = "d16:green", },
-	{ .mask = 1 << 13, .cdev.name = "d17:green", },
-	{ .mask = 1 << 14, .cdev.name = "d18:green", },
-	{ .mask = 1 << 15, .cdev.name = "d19:green", },
-#endif
+static const struct {
+	const char *name;
+	const char *trigger;
+} dbg_leds[] = {
+	{ "dbg:d4", "heartbeat", },
+	{ "dbg:d5", "cpu0", },
+	{ "dbg:d6", "default-on", },
+	{ "dbg:d7", },
+	{ "dbg:d8", },
+	{ "dbg:d9", },
+	{ "dbg:d10", },
+	{ "dbg:d11", },
+	{ "dbg:d12", },
+	{ "dbg:d13", },
+	{ "dbg:d14", },
+	{ "dbg:d15", },
+	{ "dbg:d16", },
+	{ "dbg:d17", },
+	{ "dbg:d18", },
+	{ "dbg:d19", },
 };
 
-static void
-fpga_led_set(struct led_classdev *cdev, enum led_brightness value)
+/*
+ * The triggers lines up below will only be used if the
+ * LED triggers are compiled in.
+ */
+static void dbg_led_set(struct led_classdev *cdev,
+			      enum led_brightness b)
 {
-	struct dbg_led	*led = container_of(cdev, struct dbg_led, cdev);
-	unsigned long	flags;
+	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+	u16 reg;
 
-	spin_lock_irqsave(&lock, flags);
-	if (value == LED_OFF)
-		hw_led_state &= ~led->mask;
+	reg = __raw_readw(&fpga->leds);
+	if (b != LED_OFF)
+		reg |= led->mask;
 	else
-		hw_led_state |= led->mask;
-	__raw_writew(~hw_led_state, &fpga->leds);
-	spin_unlock_irqrestore(&lock, flags);
+		reg &= ~led->mask;
+	__raw_writew(reg, &fpga->leds);
 }
 
-static void __init newled_init(struct device *dev)
+static enum led_brightness dbg_led_get(struct led_classdev *cdev)
 {
-	unsigned	i;
-	struct dbg_led	*led;
-	int		status;
+	struct dbg_led *led = container_of(cdev, struct dbg_led, cdev);
+	u16 reg;
 
-	for (i = 0, led = dbg_leds; i < ARRAY_SIZE(dbg_leds); i++, led++) {
-		led->cdev.brightness_set = fpga_led_set;
-		status = led_classdev_register(dev, &led->cdev);
-		if (status < 0)
-			break;
-	}
-	return;
+	reg = __raw_readw(&fpga->leds);
+	return (reg & led->mask) ? LED_FULL : LED_OFF;
 }
 
-
-/*-------------------------------------------------------------------------*/
-
-static int /* __init */ fpga_probe(struct platform_device *pdev)
+static int fpga_probe(struct platform_device *pdev)
 {
 	struct resource	*iomem;
-
-	spin_lock_init(&lock);
+	int i;
 
 	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!iomem)
 		return -ENODEV;
 
 	fpga = ioremap(iomem->start, H2P2_DBG_FPGA_SIZE);
-	__raw_writew(~0, &fpga->leds);
+	__raw_writew(0xff, &fpga->leds);
+
+	for (i = 0; i < ARRAY_SIZE(dbg_leds); i++) {
+		struct dbg_led *led;
+
+		led = kzalloc(sizeof(*led), GFP_KERNEL);
+		if (!led)
+			break;
 
-#ifdef	CONFIG_LEDS
-	leds_event = h2p2_dbg_leds_event;
-	leds_event(led_start);
-#endif
+		led->cdev.name = dbg_leds[i].name;
+		led->cdev.brightness_set = dbg_led_set;
+		led->cdev.brightness_get = dbg_led_get;
+		led->cdev.default_trigger = dbg_leds[i].trigger;
+		led->mask = BIT(i);
 
-	if (new_led_api()) {
-		newled_init(&pdev->dev);
+		if (led_classdev_register(NULL, &led->cdev) < 0) {
+			kfree(led);
+			break;
+		}
 	}
 
 	return 0;
@@ -281,13 +120,15 @@ static int /* __init */ fpga_probe(struct platform_device *pdev)
 
 static int fpga_suspend_noirq(struct device *dev)
 {
-	__raw_writew(~0, &fpga->leds);
+	fpga_led_state = __raw_readw(&fpga->leds);
+	__raw_writew(0xff, &fpga->leds);
+
 	return 0;
 }
 
 static int fpga_resume_noirq(struct device *dev)
 {
-	__raw_writew(~hw_led_state, &fpga->leds);
+	__raw_writew(~fpga_led_state, &fpga->leds);
 	return 0;
 }