summaryrefslogtreecommitdiffstats
path: root/arch/arm/plat-omap/gpio.c
diff options
context:
space:
mode:
authorCharulatha V <charu@ti.com>2009-11-22 19:11:25 +0100
committerTony Lindgren <tony@atomide.com>2009-11-22 19:24:33 +0100
commit058af1ea98675a672ad2aefca035d2e5a228d2cc (patch)
tree623536859832cea0b8e10cf854ebf2cf73d9ec08 /arch/arm/plat-omap/gpio.c
parentomap: Cleanup the coding style in id.c (diff)
downloadlinux-058af1ea98675a672ad2aefca035d2e5a228d2cc.tar.xz
linux-058af1ea98675a672ad2aefca035d2e5a228d2cc.zip
omap: GPIO module enable/disable
This patch disables a GPIO module when all pins of a GPIO module are inactive (clock gating forced at module level) and enables the module when any gpio in the module is requested. The module is enabled only when "mod_usage" indicates that no GPIO in that module is currently active and the GPIO being requested is the 1st one to be active in that module. Each module would be disabled in omap_gpio_free() API when all GPIOs in a particular module becomes inactive. The module is re-enabled in omap_gpio_request() API when a GPIO is requested from the module that was previously disabled. Since individual GPIO's bookkeeping is added in this patch via "mod_usage", the same is used in omap_set_gpio_debounce() & omap_set_gpio_debounce_time() APIs to ensure that the gpio being used is actually "requested" prior to being used (Nishant Menon's <nm@ti.comSuggestion) GPIO module level details are specific to hardware and hence introducing this patch in low level layer (plat-omap/gpio.c) Signed-off-by: Charulatha V <charu@ti.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/plat-omap/gpio.c')
-rw-r--r--arch/arm/plat-omap/gpio.c32
1 files changed, 32 insertions, 0 deletions
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 4f81ea35b733..055160e0620e 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -195,6 +195,7 @@ struct gpio_bank {
spinlock_t lock;
struct gpio_chip chip;
struct clk *dbck;
+ u32 mod_usage;
};
#define METHOD_MPUIO 0
@@ -628,6 +629,10 @@ void omap_set_gpio_debounce(int gpio, int enable)
#else
reg += OMAP24XX_GPIO_DEBOUNCE_EN;
#endif
+ if (!(bank->mod_usage & l)) {
+ printk(KERN_ERR "GPIO %d not requested\n", gpio);
+ return;
+ }
spin_lock_irqsave(&bank->lock, flags);
val = __raw_readl(reg);
@@ -663,6 +668,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
bank = get_gpio_bank(gpio);
reg = bank->base;
+ if (!bank->mod_usage) {
+ printk(KERN_ERR "GPIO not requested\n");
+ return;
+ }
+
enc_time &= 0xff;
#ifdef CONFIG_ARCH_OMAP4
reg += OMAP4_GPIO_DEBOUNCINGTIME;
@@ -1144,6 +1154,16 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
__raw_writel(__raw_readl(reg) | (1 << offset), reg);
}
#endif
+ if (!cpu_class_is_omap1()) {
+ if (!bank->mod_usage) {
+ u32 ctrl;
+ ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+ ctrl &= 0xFFFFFFFE;
+ /* Module is enabled, clocks are not gated */
+ __raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+ }
+ bank->mod_usage |= 1 << offset;
+ }
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
@@ -1170,6 +1190,16 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
__raw_writel(1 << offset, reg);
}
#endif
+ if (!cpu_class_is_omap1()) {
+ bank->mod_usage &= ~(1 << offset);
+ if (!bank->mod_usage) {
+ u32 ctrl;
+ ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+ /* Module is disabled, clocks are gated */
+ ctrl |= 1;
+ __raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+ }
+ }
_reset_gpio(bank, bank->chip.base + offset);
spin_unlock_irqrestore(&bank->lock, flags);
}
@@ -1749,6 +1779,8 @@ static int __init _omap_gpio_init(void)
gpio_count = 32;
}
#endif
+
+ bank->mod_usage = 0;
/* REVISIT eventually switch from OMAP-specific gpio structs
* over to the generic ones
*/