diff options
author | Syed Rafiuddin <rafiuddin.syed@ti.com> | 2009-07-28 15:27:30 +0200 |
---|---|---|
committer | Santosh Shilimkar <santosh.shilimkar@ti.com> | 2009-07-28 15:27:30 +0200 |
commit | 78a1a6d3411de1a8b0dc1cb92754b5f12f251912 (patch) | |
tree | 515edfe2e5c0198a8a9a4dc85f3a950c3738a94b /arch/arm/plat-omap/gpio.c | |
parent | ARM: OMAP4: Add UART4 support (diff) | |
download | linux-78a1a6d3411de1a8b0dc1cb92754b5f12f251912.tar.xz linux-78a1a6d3411de1a8b0dc1cb92754b5f12f251912.zip |
ARM: OMAP4: Update the GPIO support
This patch adds GPIO support on OMAP4430 development platform.
Signed-off-by: Syed Rafiuddin <rafiuddin.syed@ti.com>
Diffstat (limited to 'arch/arm/plat-omap/gpio.c')
-rw-r--r-- | arch/arm/plat-omap/gpio.c | 249 |
1 files changed, 198 insertions, 51 deletions
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 26b387c12423..f0b71680ec52 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -138,6 +138,32 @@ #define OMAP24XX_GPIO_CLEARDATAOUT 0x0090 #define OMAP24XX_GPIO_SETDATAOUT 0x0094 +#define OMAP4_GPIO_REVISION 0x0000 +#define OMAP4_GPIO_SYSCONFIG 0x0010 +#define OMAP4_GPIO_EOI 0x0020 +#define OMAP4_GPIO_IRQSTATUSRAW0 0x0024 +#define OMAP4_GPIO_IRQSTATUSRAW1 0x0028 +#define OMAP4_GPIO_IRQSTATUS0 0x002c +#define OMAP4_GPIO_IRQSTATUS1 0x0030 +#define OMAP4_GPIO_IRQSTATUSSET0 0x0034 +#define OMAP4_GPIO_IRQSTATUSSET1 0x0038 +#define OMAP4_GPIO_IRQSTATUSCLR0 0x003c +#define OMAP4_GPIO_IRQSTATUSCLR1 0x0040 +#define OMAP4_GPIO_IRQWAKEN0 0x0044 +#define OMAP4_GPIO_IRQWAKEN1 0x0048 +#define OMAP4_GPIO_SYSSTATUS 0x0104 +#define OMAP4_GPIO_CTRL 0x0130 +#define OMAP4_GPIO_OE 0x0134 +#define OMAP4_GPIO_DATAIN 0x0138 +#define OMAP4_GPIO_DATAOUT 0x013c +#define OMAP4_GPIO_LEVELDETECT0 0x0140 +#define OMAP4_GPIO_LEVELDETECT1 0x0144 +#define OMAP4_GPIO_RISINGDETECT 0x0148 +#define OMAP4_GPIO_FALLINGDETECT 0x014c +#define OMAP4_GPIO_DEBOUNCENABLE 0x0150 +#define OMAP4_GPIO_DEBOUNCINGTIME 0x0154 +#define OMAP4_GPIO_CLEARDATAOUT 0x0190 +#define OMAP4_GPIO_SETDATAOUT 0x0194 /* * omap34xx specific GPIO registers */ @@ -386,12 +412,16 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP850_GPIO_DIR_CONTROL; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; break; #endif +#if defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_24XX: + reg += OMAP4_GPIO_OE; + break; +#endif default: WARN_ON(1); return; @@ -459,8 +489,7 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l &= ~(1 << gpio); break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETDATAOUT; @@ -469,6 +498,15 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l = 1 << gpio; break; #endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP4_GPIO_SETDATAOUT; + else + reg += OMAP4_GPIO_CLEARDATAOUT; + l = 1 << gpio; + break; +#endif default: WARN_ON(1); return; @@ -511,12 +549,16 @@ static int __omap_get_gpio_datain(int gpio) reg += OMAP850_GPIO_DATA_INPUT; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_DATAIN; break; #endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_24XX: + reg += OMAP4_GPIO_DATAIN; + break; +#endif default: return -EINVAL; } @@ -544,7 +586,11 @@ void omap_set_gpio_debounce(int gpio, int enable) bank = get_gpio_bank(gpio); reg = bank->base; +#ifdef CONFIG_ARCH_OMAP4 + reg += OMAP4_GPIO_DEBOUNCENABLE; +#else reg += OMAP24XX_GPIO_DEBOUNCE_EN; +#endif spin_lock_irqsave(&bank->lock, flags); val = __raw_readl(reg); @@ -581,7 +627,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time) reg = bank->base; enc_time &= 0xff; +#ifdef CONFIG_ARCH_OMAP4 + reg += OMAP4_GPIO_DEBOUNCINGTIME; +#else reg += OMAP24XX_GPIO_DEBOUNCE_VAL; +#endif __raw_writel(enc_time, reg); } EXPORT_SYMBOL(omap_set_gpio_debounce_time); @@ -593,23 +643,46 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, { void __iomem *base = bank->base; u32 gpio_bit = 1 << gpio; + u32 val; - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, - trigger & IRQ_TYPE_LEVEL_LOW); - MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, - trigger & IRQ_TYPE_LEVEL_HIGH); - MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_RISING); - MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, - trigger & IRQ_TYPE_EDGE_FALLING); - + if (cpu_is_omap44xx()) { + MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + MOD_REG_BIT(OMAP4_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + MOD_REG_BIT(OMAP4_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + MOD_REG_BIT(OMAP4_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); + } else { + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT0, gpio_bit, + trigger & IRQ_TYPE_LEVEL_LOW); + MOD_REG_BIT(OMAP24XX_GPIO_LEVELDETECT1, gpio_bit, + trigger & IRQ_TYPE_LEVEL_HIGH); + MOD_REG_BIT(OMAP24XX_GPIO_RISINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_RISING); + MOD_REG_BIT(OMAP24XX_GPIO_FALLINGDETECT, gpio_bit, + trigger & IRQ_TYPE_EDGE_FALLING); + } if (likely(!(bank->non_wakeup_gpios & gpio_bit))) { - if (trigger != 0) - __raw_writel(1 << gpio, bank->base + if (cpu_is_omap44xx()) { + if (trigger != 0) + __raw_writel(1 << gpio, bank->base+ + OMAP4_GPIO_IRQWAKEN0); + else { + val = __raw_readl(bank->base + + OMAP4_GPIO_IRQWAKEN0); + __raw_writel(val & (~(1 << gpio)), bank->base + + OMAP4_GPIO_IRQWAKEN0); + } + } else { + if (trigger != 0) + __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_SETWKUENA); - else - __raw_writel(1 << gpio, bank->base + else + __raw_writel(1 << gpio, bank->base + OMAP24XX_GPIO_CLEARWKUENA); + } } else { if (trigger != 0) bank->enabled_non_wakeup_gpios |= gpio_bit; @@ -617,9 +690,15 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio, bank->enabled_non_wakeup_gpios &= ~gpio_bit; } - bank->level_mask = - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | - __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); + if (cpu_is_omap44xx()) { + bank->level_mask = + __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT0) | + __raw_readl(bank->base + OMAP4_GPIO_LEVELDETECT1); + } else { + bank->level_mask = + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0) | + __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); + } } #endif @@ -783,12 +862,16 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP850_GPIO_INT_STATUS; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQSTATUS1; break; #endif +#if defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_24XX: + reg += OMAP4_GPIO_IRQSTATUS0; + break; +#endif default: WARN_ON(1); return; @@ -798,12 +881,16 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) /* Workaround for clearing DSP GPIO interrupts to allow retention */ #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2; - if (cpu_is_omap24xx() || cpu_is_omap34xx()) +#endif +#if defined(CONFIG_ARCH_OMAP4) + reg = bank->base + OMAP4_GPIO_IRQSTATUS1; +#endif + if (cpu_is_omap24xx() || cpu_is_omap34xx() || cpu_is_omap44xx()) { __raw_writel(gpio_mask, reg); /* Flush posted write for the irq status to avoid spurious interrupts */ __raw_readl(reg); -#endif + } } static inline void _clear_gpio_irqstatus(struct gpio_bank *bank, int gpio) @@ -853,13 +940,18 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) inv = 1; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_IRQENABLE1; mask = 0xffffffff; break; #endif +#if defined(CONFIG_ARCH_OMAP4) + case METHOD_GPIO_24XX: + reg += OMAP4_GPIO_IRQSTATUSSET0; + mask = 0xffffffff; + break; +#endif default: WARN_ON(1); return 0; @@ -927,8 +1019,7 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l |= gpio_mask; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: if (enable) reg += OMAP24XX_GPIO_SETIRQENABLE1; @@ -937,6 +1028,15 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l = gpio_mask; break; #endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_24XX: + if (enable) + reg += OMAP4_GPIO_IRQSTATUSSET0; + else + reg += OMAP4_GPIO_IRQSTATUSCLR0; + l = gpio_mask; + break; +#endif default: WARN_ON(1); return; @@ -1112,11 +1212,14 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_850) isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) isr_reg = bank->base + OMAP24XX_GPIO_IRQSTATUS1; #endif +#if defined(CONFIG_ARCH_OMAP4) + if (bank->method == METHOD_GPIO_24XX) + isr_reg = bank->base + OMAP4_GPIO_IRQSTATUS0; +#endif while(1) { u32 isr_saved, level_mask = 0; u32 enabled; @@ -1547,7 +1650,7 @@ static int __init _omap_gpio_init(void) gpio_bank_count = OMAP34XX_NR_GPIOS; gpio_bank = gpio_bank_44xx; - rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION); + rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION); printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n", (rev >> 4) & 0x0f, rev & 0x0f); } @@ -1581,7 +1684,16 @@ static int __init _omap_gpio_init(void) static const u32 non_wakeup_gpios[] = { 0xe203ffc0, 0x08700040 }; - + if (cpu_is_omap44xx()) { + __raw_writel(0xffffffff, bank->base + + OMAP4_GPIO_IRQSTATUSCLR0); + __raw_writew(0x0015, bank->base + + OMAP4_GPIO_SYSCONFIG); + __raw_writel(0x00000000, bank->base + + OMAP4_GPIO_DEBOUNCENABLE); + /* Initialize interface clock ungated, module enabled */ + __raw_writel(0, bank->base + OMAP4_GPIO_CTRL); + } else { __raw_writel(0x00000000, bank->base + OMAP24XX_GPIO_IRQENABLE1); __raw_writel(0xffffffff, bank->base + OMAP24XX_GPIO_IRQSTATUS1); __raw_writew(0x0015, bank->base + OMAP24XX_GPIO_SYSCONFIG); @@ -1589,12 +1701,12 @@ static int __init _omap_gpio_init(void) /* Initialize interface clock ungated, module enabled */ __raw_writel(0, bank->base + OMAP24XX_GPIO_CTRL); + } if (i < ARRAY_SIZE(non_wakeup_gpios)) bank->non_wakeup_gpios = non_wakeup_gpios[i]; gpio_count = 32; } #endif - /* REVISIT eventually switch from OMAP-specific gpio structs * over to the generic ones */ @@ -1680,14 +1792,20 @@ static int omap_gpio_suspend(struct sys_device *dev, pm_message_t mesg) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: wake_status = bank->base + OMAP24XX_GPIO_WAKE_EN; wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; break; #endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_24XX: + wake_status = bank->base + OMAP4_GPIO_IRQWAKEN0; + wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; + wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; + break; +#endif default: continue; } @@ -1722,13 +1840,18 @@ static int omap_gpio_resume(struct sys_device *dev) wake_set = bank->base + OMAP1610_GPIO_SET_WAKEUPENA; break; #endif -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) case METHOD_GPIO_24XX: wake_clear = bank->base + OMAP24XX_GPIO_CLEARWKUENA; wake_set = bank->base + OMAP24XX_GPIO_SETWKUENA; break; #endif +#ifdef CONFIG_ARCH_OMAP4 + case METHOD_GPIO_24XX: + wake_clear = bank->base + OMAP4_GPIO_IRQWAKEN0; + wake_set = bank->base + OMAP4_GPIO_IRQWAKEN0; + break; +#endif default: continue; } @@ -1772,21 +1895,29 @@ void omap2_gpio_prepare_for_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) bank->saved_datain = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); l1 = __raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT); l2 = __raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT); #endif +#ifdef CONFIG_ARCH_OMAP4 + bank->saved_datain = __raw_readl(bank->base + + OMAP4_GPIO_DATAIN); + l1 = __raw_readl(bank->base + OMAP4_GPIO_FALLINGDETECT); + l2 = __raw_readl(bank->base + OMAP4_GPIO_RISINGDETECT); +#endif bank->saved_fallingdetect = l1; bank->saved_risingdetect = l2; l1 &= ~bank->enabled_non_wakeup_gpios; l2 &= ~bank->enabled_non_wakeup_gpios; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) __raw_writel(l1, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(l2, bank->base + OMAP24XX_GPIO_RISINGDETECT); #endif +#ifdef CONFIG_ARCH_OMAP4 + __raw_writel(l1, bank->base + OMAP4_GPIO_FALLINGDETECT); + __raw_writel(l2, bank->base + OMAP4_GPIO_RISINGDETECT); +#endif c++; } if (!c) { @@ -1808,27 +1939,29 @@ void omap2_gpio_resume_after_retention(void) if (!(bank->enabled_non_wakeup_gpios)) continue; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) __raw_writel(bank->saved_fallingdetect, bank->base + OMAP24XX_GPIO_FALLINGDETECT); __raw_writel(bank->saved_risingdetect, bank->base + OMAP24XX_GPIO_RISINGDETECT); + l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); +#endif +#ifdef CONFIG_ARCH_OMAP4 + __raw_writel(bank->saved_fallingdetect, + bank->base + OMAP4_GPIO_FALLINGDETECT); + __raw_writel(bank->saved_risingdetect, + bank->base + OMAP4_GPIO_RISINGDETECT); + l = __raw_readl(bank->base + OMAP4_GPIO_DATAIN); #endif /* Check if any of the non-wakeup interrupt GPIOs have changed * state. If so, generate an IRQ by software. This is * horribly racy, but it's the best we can do to work around * this silicon bug. */ -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) - l = __raw_readl(bank->base + OMAP24XX_GPIO_DATAIN); -#endif l ^= bank->saved_datain; l &= bank->non_wakeup_gpios; if (l) { u32 old0, old1; -#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ - defined(CONFIG_ARCH_OMAP4) +#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) old0 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0); old1 = __raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1); __raw_writel(old0 | l, bank->base + OMAP24XX_GPIO_LEVELDETECT0); @@ -1836,6 +1969,20 @@ void omap2_gpio_resume_after_retention(void) __raw_writel(old0, bank->base + OMAP24XX_GPIO_LEVELDETECT0); __raw_writel(old1, bank->base + OMAP24XX_GPIO_LEVELDETECT1); #endif +#ifdef CONFIG_ARCH_OMAP4 + old0 = __raw_readl(bank->base + + OMAP4_GPIO_LEVELDETECT0); + old1 = __raw_readl(bank->base + + OMAP4_GPIO_LEVELDETECT1); + __raw_writel(old0 | l, bank->base + + OMAP4_GPIO_LEVELDETECT0); + __raw_writel(old1 | l, bank->base + + OMAP4_GPIO_LEVELDETECT1); + __raw_writel(old0, bank->base + + OMAP4_GPIO_LEVELDETECT0); + __raw_writel(old1, bank->base + + OMAP4_GPIO_LEVELDETECT1); +#endif } } |