ARM: SAMSUNG: Remove uart irq handling from plaform code

With uart tx/rx/err interrupt handling moved into the driver for s3c64xx
and later SoC's, the uart interrupt handling in plaform code can be removed.
The uart device irq resources is reduced to one and the related unused
macros are removed.

Suggested-by: Grant Likely <grant.likely@secretlab.ca>
CC: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

4 files changed, 5 insertions, 102 deletions

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index b3e10659e4b8..dffa37bc4a0b 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -65,11 +65,6 @@ config SAMSUNG_IRQ_VIC_TIMER
        help
          Internal configuration to build the VIC timer interrupt code.
 
-config SAMSUNG_IRQ_UART
-       bool
-       help
-         Internal configuration to build the IRQ UART demux code.
-
 # options for gpio configuration support
 
 config SAMSUNG_GPIOLIB_4BIT
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 853764ba8cc5..1105922342fe 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -21,7 +21,6 @@ obj-y				+= dev-asocdma.o
 
 obj-$(CONFIG_SAMSUNG_CLKSRC)	+= clock-clksrc.o
 
-obj-$(CONFIG_SAMSUNG_IRQ_UART)	+= irq-uart.o
 obj-$(CONFIG_SAMSUNG_IRQ_VIC_TIMER) += irq-vic-timer.o
 
 # ADC
diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h
index bac36fa3becb..720734847027 100644
--- a/arch/arm/plat-samsung/include/plat/regs-serial.h
+++ b/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -186,6 +186,11 @@
 #define S3C64XX_UINTSP		0x34
 #define S3C64XX_UINTM		0x38
 
+#define S3C64XX_UINTM_RXD	(0)
+#define S3C64XX_UINTM_TXD	(2)
+#define S3C64XX_UINTM_RXD_MSK	(1 << S3C64XX_UINTM_RXD)
+#define S3C64XX_UINTM_TXD_MSK	(1 << S3C64XX_UINTM_TXD)
+
 /* Following are specific to S5PV210 */
 #define S5PV210_UCON_CLKMASK	(1<<10)
 #define S5PV210_UCON_PCLK	(0<<10)
diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c
deleted file mode 100644
index 3014c7226bd1..000000000000
--- a/arch/arm/plat-samsung/irq-uart.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* arch/arm/plat-samsung/irq-uart.c
- *	originally part of arch/arm/plat-s3c64xx/irq.c
- *
- * Copyright 2008 Openmoko, Inc.
- * Copyright 2008 Simtec Electronics
- *      Ben Dooks <ben@simtec.co.uk>
- *      http://armlinux.simtec.co.uk/
- *
- * Samsung- UART Interrupt handling
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/serial_core.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/mach/irq.h>
-
-#include <mach/map.h>
-#include <plat/irq-uart.h>
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-
-/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3]
- * are consecutive when looking up the interrupt in the demux routines.
- */
-static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc)
-{
-	struct s3c_uart_irq *uirq = desc->irq_data.handler_data;
-	struct irq_chip *chip = irq_get_chip(irq);
-	u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP);
-	int base = uirq->base_irq;
-
-	chained_irq_enter(chip, desc);
-
-	if (pend & (1 << 0))
-		generic_handle_irq(base);
-	if (pend & (1 << 1))
-		generic_handle_irq(base + 1);
-	if (pend & (1 << 2))
-		generic_handle_irq(base + 2);
-	if (pend & (1 << 3))
-		generic_handle_irq(base + 3);
-
-	chained_irq_exit(chip, desc);
-}
-
-static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq)
-{
-	void __iomem *reg_base = uirq->regs;
-	struct irq_chip_generic *gc;
-	struct irq_chip_type *ct;
-
-	/* mask all interrupts at the start. */
-	__raw_writel(0xf, reg_base + S3C64XX_UINTM);
-
-	gc = irq_alloc_generic_chip("s3c-uart", 1, uirq->base_irq, reg_base,
-				    handle_level_irq);
-
-	if (!gc) {
-		pr_err("%s: irq_alloc_generic_chip for IRQ %u failed\n",
-		       __func__, uirq->base_irq);
-		return;
-	}
-
-	ct = gc->chip_types;
-	ct->chip.irq_ack = irq_gc_ack_set_bit;
-	ct->chip.irq_mask = irq_gc_mask_set_bit;
-	ct->chip.irq_unmask = irq_gc_mask_clr_bit;
-	ct->regs.ack = S3C64XX_UINTP;
-	ct->regs.mask = S3C64XX_UINTM;
-	irq_setup_generic_chip(gc, IRQ_MSK(4), IRQ_GC_INIT_MASK_CACHE,
-			       IRQ_NOREQUEST | IRQ_NOPROBE, 0);
-
-	irq_set_handler_data(uirq->parent_irq, uirq);
-	irq_set_chained_handler(uirq->parent_irq, s3c_irq_demux_uart);
-}
-
-/**
- * s3c_init_uart_irqs() - initialise UART IRQs and the necessary demuxing
- * @irq: The interrupt data for registering
- * @nr_irqs: The number of interrupt descriptions in @irq.
- *
- * Register the UART interrupts specified by @irq including the demuxing
- * routines. This supports the S3C6400 and newer style of devices.
- */
-void __init s3c_init_uart_irqs(struct s3c_uart_irq *irq, unsigned int nr_irqs)
-{
-	for (; nr_irqs > 0; nr_irqs--, irq++)
-		s3c_init_uart_irq(irq);
-}