Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC specific changes from Arnd Bergmann:
 "These changes are all to SoC-specific code, a total of 33 branches on
  17 platforms were pulled into this.  Like last time, Renesas sh-mobile
  is now the platform with the most changes, followed by OMAP and
  EXYNOS.

  Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
  branch, both containing almost no platform specific code at all, since
  they are using generic subsystem interfaces for clocks, pinctrl,
  interrupts etc.  The device drivers are getting merged through the
  respective subsystem maintainer trees.

  One more SoC (u300) is now multiplatform capable and several others
  (shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
  towards that goal with this series but need more work.

  Also noteworthy is the work on PCI here, which is traditionally part
  of the SoC specific code.  With the changes done by Thomas Petazzoni,
  we can now more easily have PCI host controller drivers as loadable
  modules and keep them separate from the platform code in
  drivers/pci/host.  This has already led to the discovery that three
  platforms (exynos, spear and imx) are actually using an identical PCIe
  host controller and will be able to share a driver once support for
  spear and imx is added."

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
  ARM: integrator: let pciv3 use mem/premem from device tree
  ARM: integrator: set local side PCI addresses right
  ARM: dts: Add pcie controller node for exynos5440-ssdk5440
  ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
  ARM: EXYNOS: Enable PCIe support for Exynos5440
  pci: Add PCIe driver for Samsung Exynos
  ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
  ARM: keystone: Move CPU bringup code to dedicated asm file
  ARM: multiplatform: always pick one CPU type
  ARM: imx: select syscon for IMX6SL
  ARM: keystone: select ARM_ERRATA_798181 only for SMP
  ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
  ARM: OMAP2+: AM43x: resolve SMP related build error
  dmaengine: edma: enable build for AM33XX
  ARM: edma: Add EDMA crossbar event mux support
  ARM: edma: Add DT and runtime PM support to the private EDMA API
  dmaengine: edma: Add TI EDMA device tree binding
  arm: add basic support for Rockchip RK3066a boards
  arm: add debug uarts for rockchip rk29xx and rk3xxx series
  arm: Add basic clocks for Rockchip rk3066a SoCs
  ...

8 files changed, 72 insertions, 28 deletions

diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index ec68155a8bf1..3dc5cbea86cc 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -6,7 +6,7 @@
 
 config PLAT_SAMSUNG
 	bool
-	depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P
+	depends on PLAT_S3C24XX || ARCH_S3C64XX || PLAT_S5P || ARCH_EXYNOS
 	default y
 	select GENERIC_IRQ_CHIP
 	select NO_IOPORT
@@ -15,12 +15,10 @@ config PLAT_SAMSUNG
 
 config PLAT_S5P
 	bool
-	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+	depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210)
 	default y
 	select ARCH_REQUIRE_GPIOLIB
-	select ARM_GIC if ARCH_EXYNOS
-	select ARM_VIC if !ARCH_EXYNOS
-	select GIC_NON_BANKED if ARCH_EXYNOS4
+	select ARM_VIC
 	select NO_IOPORT
 	select PLAT_SAMSUNG
 	select S3C_GPIO_TRACK
@@ -60,6 +58,20 @@ config S3C_LOWLEVEL_UART_PORT
 	  this configuration should be between zero and two. The port
 	  must have been initialised by the boot-loader before use.
 
+config SAMSUNG_ATAGS
+	def_bool n
+	depends on !ARCH_MULTIPLATFORM
+	depends on ATAGS
+	help
+	   This option enables ATAGS based boot support code for
+	   Samsung platforms, including static platform devices, legacy
+	   clock, timer and interrupt initialization, etc.
+
+	   Platforms that support only DT based boot need not to select
+	   this option.
+
+if SAMSUNG_ATAGS
+
 # timer options
 
 config SAMSUNG_HRT
@@ -367,11 +379,6 @@ config S5P_DEV_JPEG
 	help
 	  Compile in platform device definitions for JPEG codec
 
-config S5P_DEV_MFC
-	bool
-	help
-	  Compile in setup memory (init) code for MFC
-
 config S5P_DEV_ONENAND
 	bool
 	help
@@ -412,6 +419,21 @@ config S3C_DMA
 	help
 	  Internal configuration for S3C DMA core
 
+config S5P_IRQ_PM
+	bool
+	default y if S5P_PM
+	help
+	  Legacy IRQ power management for S5P platforms
+
+config SAMSUNG_PM_GPIO
+	bool
+	default y if GPIO_SAMSUNG && PM
+	help
+	  Include legacy GPIO power management code for platforms not using
+	  pinctrl-samsung driver.
+
+endif
+
 config SAMSUNG_DMADEV
 	bool
 	select ARM_AMBA
@@ -421,6 +443,11 @@ config SAMSUNG_DMADEV
 	help
 	  Use DMA device engine for PL330 DMAC.
 
+config S5P_DEV_MFC
+	bool
+	help
+	  Compile in setup memory (init) code for MFC
+
 comment "Power management"
 
 config SAMSUNG_PM_DEBUG
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
index 03cea140cfd0..98d07d8fc7a7 100644
--- a/arch/arm/plat-samsung/Makefile
+++ b/arch/arm/plat-samsung/Makefile
@@ -31,10 +31,10 @@ obj-$(CONFIG_S3C_ADC)	+= adc.o
 
 # devices
 
-obj-y				+= platformdata.o
+obj-$(CONFIG_SAMSUNG_ATAGS)	+= platformdata.o
 
-obj-y				+= devs.o
-obj-y				+= dev-uart.o
+obj-$(CONFIG_SAMSUNG_ATAGS)	+= devs.o
+obj-$(CONFIG_SAMSUNG_ATAGS)	+= dev-uart.o
 obj-$(CONFIG_S5P_DEV_MFC)	+= s5p-dev-mfc.o
 obj-$(CONFIG_S5P_DEV_UART)	+= s5p-dev-uart.o
 
@@ -52,11 +52,12 @@ obj-$(CONFIG_SAMSUNG_DMADEV)	+= dma-ops.o
 # PM support
 
 obj-$(CONFIG_PM)		+= pm.o
-obj-$(CONFIG_PM)		+= pm-gpio.o
+obj-$(CONFIG_SAMSUNG_PM_GPIO)	+= pm-gpio.o
 obj-$(CONFIG_SAMSUNG_PM_CHECK)	+= pm-check.o
 
 obj-$(CONFIG_SAMSUNG_WAKEMASK)	+= wakeup-mask.o
 obj-$(CONFIG_SAMSUNG_WDT_RESET)	+= watchdog-reset.o
 
-obj-$(CONFIG_S5P_PM)		+= s5p-pm.o s5p-irq-pm.o
+obj-$(CONFIG_S5P_PM)		+= s5p-pm.o
+obj-$(CONFIG_S5P_IRQ_PM)	+= s5p-irq-pm.o
 obj-$(CONFIG_S5P_SLEEP)		+= s5p-sleep.o
diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
index d01576318b2c..bd3a6db14cbb 100644
--- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
+++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h
@@ -28,7 +28,6 @@ struct s3c24xx_dma_map {
 	const char		*name;
 
 	unsigned long		 channels[S3C_DMA_CHANNELS];
-	unsigned long		 channels_rx[S3C_DMA_CHANNELS];
 };
 
 struct s3c24xx_dma_selection {
@@ -38,10 +37,6 @@ struct s3c24xx_dma_selection {
 
 	void	(*select)(struct s3c2410_dma_chan *chan,
 			  struct s3c24xx_dma_map *map);
-
-	void	(*direction)(struct s3c2410_dma_chan *chan,
-			     struct s3c24xx_dma_map *map,
-			     enum dma_data_direction dir);
 };
 
 extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index f6fcadeee969..5d47ca35cabd 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -166,6 +166,7 @@ extern void s3c_pm_check_store(void);
  */
 extern void s3c_pm_configure_extint(void);
 
+#ifdef CONFIG_GPIO_SAMSUNG
 /**
  * samsung_pm_restore_gpios() - restore the state of the gpios after sleep.
  *
@@ -181,6 +182,10 @@ extern void samsung_pm_restore_gpios(void);
  * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios().
  */
 extern void samsung_pm_save_gpios(void);
+#else
+static inline void samsung_pm_restore_gpios(void) {}
+static inline void samsung_pm_save_gpios(void) {}
+#endif
 
 extern void s3c_pm_save_core(void);
 extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-samsung/init.c b/arch/arm/plat-samsung/init.c
index 79d10fca9090..3e5c4619caa5 100644
--- a/arch/arm/plat-samsung/init.c
+++ b/arch/arm/plat-samsung/init.c
@@ -87,7 +87,7 @@ void __init s3c24xx_init_clocks(int xtal)
 }
 
 /* uart management */
-
+#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
 static int nr_uarts __initdata = 0;
 
 static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS];
@@ -134,11 +134,12 @@ void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 	if (cpu == NULL)
 		return;
 
-	if (cpu->init_uarts == NULL) {
+	if (cpu->init_uarts == NULL && IS_ENABLED(CONFIG_SAMSUNG_ATAGS)) {
 		printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
 	} else
 		(cpu->init_uarts)(cfg, no);
 }
+#endif
 
 static int __init s3c_arch_init(void)
 {
@@ -152,8 +153,9 @@ static int __init s3c_arch_init(void)
 	ret = (cpu->init)();
 	if (ret != 0)
 		return ret;
-
+#if IS_ENABLED(CONFIG_SAMSUNG_ATAGS)
 	ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts);
+#endif
 	return ret;
 }
 
diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c
index c2ff92c30bdf..a8de3cfe2ee1 100644
--- a/arch/arm/plat-samsung/pm-gpio.c
+++ b/arch/arm/plat-samsung/pm-gpio.c
@@ -192,7 +192,8 @@ struct samsung_gpio_pm samsung_gpio_pm_2bit = {
 	.resume = samsung_gpio_pm_2bit_resume,
 };
 
-#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P)
+#if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) \
+	|| defined(CONFIG_ARCH_EXYNOS)
 static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip)
 {
 	chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON);
@@ -302,7 +303,7 @@ struct samsung_gpio_pm samsung_gpio_pm_4bit = {
 	.save	= samsung_gpio_pm_4bit_save,
 	.resume = samsung_gpio_pm_4bit_resume,
 };
-#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */
+#endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P || CONFIG_ARCH_EXYNOS */
 
 /**
  * samsung_pm_save_gpio() - save gpio chip data for suspend
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index bd7124c87fea..ea3613642451 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -22,13 +22,17 @@
 
 #include <asm/cacheflush.h>
 #include <asm/suspend.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
 
 #include <plat/regs-serial.h>
+
+#ifdef CONFIG_SAMSUNG_ATAGS
+#include <mach/hardware.h>
+#include <mach/map.h>
 #include <mach/regs-clock.h>
 #include <mach/regs-irq.h>
 #include <mach/irqs.h>
+#endif
+
 #include <asm/irq.h>
 
 #include <plat/pm.h>
diff --git a/arch/arm/plat-samsung/s5p-dev-mfc.c b/arch/arm/plat-samsung/s5p-dev-mfc.c
index a93fb6fb6606..ad51f85fbd01 100644
--- a/arch/arm/plat-samsung/s5p-dev-mfc.c
+++ b/arch/arm/plat-samsung/s5p-dev-mfc.c
@@ -17,10 +17,12 @@
 #include <linux/of_fdt.h>
 #include <linux/of.h>
 
+#include <plat/mfc.h>
+
+#ifdef CONFIG_SAMSUNG_ATAGS
 #include <mach/map.h>
 #include <mach/irqs.h>
 #include <plat/devs.h>
-#include <plat/mfc.h>
 
 static struct resource s5p_mfc_resource[] = {
 	[0] = DEFINE_RES_MEM(S5P_PA_MFC, SZ_64K),
@@ -61,6 +63,10 @@ struct platform_device s5p_device_mfc_r = {
 		.coherent_dma_mask	= DMA_BIT_MASK(32),
 	},
 };
+#else
+static struct platform_device s5p_device_mfc_l;
+static struct platform_device s5p_device_mfc_r;
+#endif
 
 struct s5p_mfc_reserved_mem {
 	phys_addr_t	base;
@@ -70,6 +76,7 @@ struct s5p_mfc_reserved_mem {
 
 static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata;
 
+
 void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
 				phys_addr_t lbase, unsigned int lsize)
 {
@@ -93,6 +100,7 @@ void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
 	}
 }
 
+#ifdef CONFIG_SAMSUNG_ATAGS
 static int __init s5p_mfc_memory_init(void)
 {
 	int i;
@@ -111,6 +119,7 @@ static int __init s5p_mfc_memory_init(void)
 	return 0;
 }
 device_initcall(s5p_mfc_memory_init);
+#endif
 
 #ifdef CONFIG_OF
 int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname,