diff options
| author | Jagan Teki <jagan@amarulasolutions.com> | 2019-05-03 12:47:53 +0200 |
|---|---|---|
| committer | Maxime Ripard <maxime.ripard@bootlin.com> | 2019-05-20 09:28:01 +0200 |
| commit | 3c2a22b8aeadf8714b6779624d98a5dacd85ca7c (patch) | |
| tree | f8aa117810f574c55ef62d4a4db1d0e4a7460b15 /arch/arm64/boot/dts/allwinner | |
| parent | arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node (diff) | |
| download | linux-3c2a22b8aeadf8714b6779624d98a5dacd85ca7c.tar.xz linux-3c2a22b8aeadf8714b6779624d98a5dacd85ca7c.zip | |
arm64: dts: allwinner: a64-oceanic-5205-5inmfd: Enable GT911 CTP
Goodix GT911 CTP is bound with Oceanic 5205 5inMFD board.
The CTP connected to board with,
- SDA, SCK from i2c0
- GPIO-LD0 as AVDD28 supply
- PH4 gpio as interrupt pin
- PH11 gpio as reset pin
- X axis is inverted
- Y axis is inverted
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Diffstat (limited to 'arch/arm64/boot/dts/allwinner')
| -rw-r--r-- | arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts | 23 |
1 files changed, 23 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts index 6a2154525d1e..787ebd805a3b 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-oceanic-5205-5inmfd.dts @@ -37,6 +37,22 @@ status = "okay"; }; +&i2c0 { + status = "okay"; + + touchscreen@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + AVDD28-supply = <®_ldo_io0>; /* VDD_CTP: GPIO0-LDO */ + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* CTP-INT: PH4 */ + reset-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* CTP-RST: PH11 */ + touchscreen-inverted-x; + touchscreen-inverted-y; + }; +}; + &mdio { ext_rgmii_phy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; @@ -52,6 +68,13 @@ regulator-name = "vcc-phy"; }; +®_ldo_io0 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vdd-ctp"; + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pb_pins>; |