diff options
| author | Martin Blumenstingl <martin.blumenstingl@googlemail.com> | 2017-12-02 22:40:36 +0100 |
|---|---|---|
| committer | Kevin Hilman <khilman@baylibre.com> | 2017-12-08 19:46:33 +0100 |
| commit | 50290cfe50bd94deb221731a25347d0ac12d9f40 (patch) | |
| tree | c7f417cbff54bf55f732e7fe684b4ce522931d07 /arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | |
| parent | ARM64: dts: amlogic: use generic bus node names (diff) | |
| download | linux-50290cfe50bd94deb221731a25347d0ac12d9f40.tar.xz linux-50290cfe50bd94deb221731a25347d0ac12d9f40.zip | |
ARM64: dts: meson: add comments with the GPIO for the PHY interrupts
Currently one has to look/calculate the GPIO for the PHY interrupts
manually. Add a comment for the existing PHY interrupt lines to make it
easier to find out which GPIO is used.
This is done using the following calculation:
- number of GPIO AO pins (14 on GXBB: GPIOAO_0..13)
- add the offset of the pin which is used for the interrupt (for example
GPIOZ_15 = 15 on Odroid-C2)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-By: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Diffstat (limited to 'arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts')
| -rw-r--r-- | arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts | 2 |
1 files changed, 2 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index d6d3af5eaf55..ee4ada61c59c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -174,8 +174,10 @@ #size-cells = <0>; eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ reg = <0>; interrupt-parent = <&gpio_intc>; + /* MAC_INTR on GPIOZ_15 */ interrupts = <29 IRQ_TYPE_LEVEL_LOW>; eee-broken-1000t; }; |