Merge tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree changes for 5.3:
 - Add i.MX8MQ based Librem5 devkit support.
 - Add SNVS power key support for i.MX8MQ and i.MX8MM.
 - Add GPIO alias for imx8mq and i.MX8QXP.
 - A series from Daniel Baluta to add SAI devices and enable audio
   support for imx8mm-evk board.
 - Add DDR performance monitor unit support for i.MX8QXP.
 - Add irqsteer interrupt controller device for i.MX8MQ SoC.
 - Add CPU speed grading and all OPPs for i.MX8MM and i.MX8MQ.
 - Add OCOTP device node for i.MX8QXP.
 - Various device addition for LS1028A: SATA, qDMA, USB, Mali DP500 and
   temperature sensor.
 - Random minor coding style improvements.

* tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
  arm64: dts: librem5: enable the SNVS power key
  arm64: dts: librem5: Limit the USB to 5V
  arm64: dts: imx8qxp: added ddr performance monitor nodes
  arm64: dts: imx8qxp: sort LSIO subsystem devices
  arm64: dts: imx8qxp: sort alias alphabetically
  arm64: dts: imx8qxp: Add lsio_mu13 node
  arm64: dts: imx8mm-evk: Enable audio codec wm8524
  arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
  arm64: dts: fsl: ls1028a: Add qDMA node
  arm64: dts: imx8mm: Enable SNVS power key according to board design
  arm64: dts: imx8mq-evk: Enable SNVS power key
  arm64: dts: ls1028a: add crypto node
  arm64: dts: ls1028a: Add temperature sensor node
  arm64: dts: imx8mm: Move gic node into soc node
  arm64: dts: imx8mm: Move usbphy out of soc node
  arm64: dts: imx8mm: Pass the 'ranges' property
  arm64: dts: imx8mm: Pass a unit name for the 'soc' node
  arm64: dts: fsl: imx8mq: add the snvs power key node
  arm64: dts: ls1028a: fix watchdog device node
  arm64: dts: ls1028a: Enable sata.
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

1 files changed, 113 insertions, 31 deletions

diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index a357d82b2833..232a7412755a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -53,6 +53,8 @@
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
+			nvmem-cells = <&cpu_speed_grade>;
+			nvmem-cell-names = "speed_grade";
 		};
 
 		A53_1: cpu@1 {
@@ -100,14 +102,23 @@
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <850000>;
+			opp-supported-hw = <0xe>, <0x7>;
 			clock-latency-ns = <150000>;
 		};
 
 		opp-1600000000 {
 			opp-hz = /bits/ 64 <1600000000>;
 			opp-microvolt = <900000>;
+			opp-supported-hw = <0xc>, <0x7>;
+			clock-latency-ns = <150000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1000000>;
+			/* Consumer only but rely on speed grading */
+			opp-supported-hw = <0x8>, <0x7>;
 			clock-latency-ns = <150000>;
-			opp-suspend;
 		};
 	};
 
@@ -158,15 +169,6 @@
 		clock-output-names = "clk_ext4";
 	};
 
-	gic: interrupt-controller@38800000 {
-		compatible = "arm,gic-v3";
-		reg = <0x0 0x38800000 0 0x10000>, /* GIC Dist */
-		      <0x0 0x38880000 0 0xC0000>; /* GICR (RD_base + SGI_base) */
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-	};
-
 	psci {
 		compatible = "arm,psci-1.0";
 		method = "smc";
@@ -189,7 +191,23 @@
 		arm,no-tick-in-suspend;
 	};
 
-	soc {
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
+		assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
+		clock-names = "main_clk";
+	};
+
+	soc@0 {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -199,7 +217,73 @@
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x30000000 0x30000000 0x400000>;
+
+			sai1: sai@30010000 {
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30010000 0x10000>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
+					 <&clk IMX8MM_CLK_SAI1_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai2: sai@30020000 {
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30020000 0x10000>;
+				interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
+					<&clk IMX8MM_CLK_SAI2_ROOT>,
+					<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai3: sai@30030000 {
+				#sound-dai-cells = <0>;
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30030000 0x10000>;
+				interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
+					 <&clk IMX8MM_CLK_SAI3_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai5: sai@30050000 {
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30050000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
+					 <&clk IMX8MM_CLK_SAI5_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			sai6: sai@30060000 {
+				compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
+				reg = <0x30060000 0x10000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
+					 <&clk IMX8MM_CLK_SAI6_ROOT>,
+					 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
+				clock-names = "bus", "mclk1", "mclk2", "mclk3";
+				dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
 
 			gpio1: gpio@30200000 {
 				compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
@@ -324,6 +408,10 @@
 				/* For nvmem subnodes */
 				#address-cells = <1>;
 				#size-cells = <1>;
+
+				cpu_speed_grade: speed-grade@10 {
+					reg = <0x10 4>;
+				};
 			};
 
 			anatop: anatop@30360000 {
@@ -351,6 +439,7 @@
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
+					status = "disabled";
 				};
 			};
 
@@ -376,7 +465,7 @@
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x30400000 0x30400000 0x400000>;
 
 			pwm1: pwm@30660000 {
 				compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
@@ -427,7 +516,7 @@
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x30800000 0x30800000 0x400000>;
 
 			ecspi1: spi@30820000 {
 				compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
@@ -646,7 +735,7 @@
 			compatible = "fsl,aips-bus", "simple-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges;
+			ranges = <0x32c00000 0x32c00000 0x400000>;
 
 			usbotg1: usb@32e40000 {
 				compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
@@ -663,14 +752,6 @@
 				status = "disabled";
 			};
 
-			usbphynop1: usbphynop1 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
-				assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
-				clock-names = "main_clk";
-			};
-
 			usbmisc1: usbmisc@32e40200 {
 				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
 				#index-cells = <1>;
@@ -692,14 +773,6 @@
 				status = "disabled";
 			};
 
-			usbphynop2: usbphynop2 {
-				compatible = "usb-nop-xceiv";
-				clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
-				assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
-				assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
-				clock-names = "main_clk";
-			};
-
 			usbmisc2: usbmisc@32e50200 {
 				compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
 				#index-cells = <1>;
@@ -736,5 +809,14 @@
 			dma-names = "rx-tx";
 			status = "disabled";
 		};
+
+		gic: interrupt-controller@38800000 {
+			compatible = "arm,gic-v3";
+			reg = <0x38800000 0x10000>, /* GIC Dist */
+			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
 	};
 };