Merge tag 'v5.7-rc1' into locking/kcsan, to resolve conflicts and refresh

Resolve these conflicts:

	arch/x86/Kconfig
	arch/x86/kernel/Makefile

Do a minor "evil merge" to move the KCSAN entry up a bit by a few lines
in the Kconfig to reduce the probability of future conflicts.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

1 files changed, 69 insertions, 12 deletions

diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index a44b5438e842..fa78f0163270 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "imx8mn-pinfunc.h"
 
@@ -67,6 +68,7 @@
 			nvmem-cells = <&cpu_speed_grade>;
 			nvmem-cell-names = "speed_grade";
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_1: cpu@1 {
@@ -79,6 +81,7 @@
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_2: cpu@2 {
@@ -91,6 +94,7 @@
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_3: cpu@3 {
@@ -103,6 +107,7 @@
 			next-level-cache = <&A53_L2>;
 			operating-points-v2 = <&a53_opp_table>;
 			cpu-idle-states = <&cpu_pd_wait>;
+			#cooling-cells = <2>;
 		};
 
 		A53_L2: l2-cache0 {
@@ -116,7 +121,7 @@
 
 		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <850000>;
+			opp-microvolt = <950000>;
 			opp-supported-hw = <0xb00>, <0x7>;
 			clock-latency-ns = <150000>;
 			opp-suspend;
@@ -186,6 +191,38 @@
 		method = "smc";
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tmu>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit0: trip1 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
@@ -203,8 +240,8 @@
 		ranges = <0x0 0x0 0x0 0x3e000000>;
 
 		aips1: bus@30000000 {
-			compatible = "simple-bus";
-			reg = <0x30000000 0x400000>;
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x301f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -274,6 +311,13 @@
 				gpio-ranges = <&iomuxc 0 119 30>;
 			};
 
+			tmu: tmu@30260000 {
+				compatible = "fsl,imx8mn-tmu", "fsl,imx8mm-tmu";
+				reg = <0x30260000 0x10000>;
+				clocks = <&clk IMX8MN_CLK_TMU_ROOT>;
+				#thermal-sensor-cells = <0>;
+			};
+
 			wdog1: watchdog@30280000 {
 				compatible = "fsl,imx8mn-wdt", "fsl,imx21-wdt";
 				reg = <0x30280000 0x10000>;
@@ -358,6 +402,7 @@
 					offset = <0x34>;
 					interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 						     <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
 					clock-names = "snvs-rtc";
 				};
 
@@ -365,6 +410,8 @@
 					compatible = "fsl,sec-v4.0-pwrkey";
 					regmap = <&snvs>;
 					interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+					clocks = <&clk IMX8MN_CLK_SNVS_ROOT>;
+					clock-names = "snvs-pwrkey";
 					linux,keycode = <KEY_POWER>;
 					wakeup-source;
 					status = "disabled";
@@ -379,6 +426,16 @@
 					 <&clk_ext3>, <&clk_ext4>;
 				clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
 					      "clk_ext3", "clk_ext4";
+				assigned-clocks = <&clk IMX8MN_CLK_NOC>,
+						<&clk IMX8MN_CLK_AUDIO_AHB>,
+						<&clk IMX8MN_CLK_IPG_AUDIO_ROOT>,
+						<&clk IMX8MN_SYS_PLL3>;
+				assigned-clock-parents = <&clk IMX8MN_SYS_PLL3_OUT>,
+							 <&clk IMX8MN_SYS_PLL1_800M>;
+				assigned-clock-rates = <0>,
+							<400000000>,
+							<400000000>,
+							<600000000>;
 			};
 
 			src: reset-controller@30390000 {
@@ -390,8 +447,8 @@
 		};
 
 		aips2: bus@30400000 {
-			compatible = "simple-bus";
-			reg = <0x30400000 0x400000>;
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x305f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -450,8 +507,8 @@
 		};
 
 		aips3: bus@30800000 {
-			compatible = "simple-bus";
-			reg = <0x30800000 0x400000>;
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x309f0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;
@@ -543,19 +600,19 @@
 					 <&clk IMX8MN_CLK_IPG_ROOT>;
 				clock-names = "aclk", "ipg";
 
-				sec_jr0: jr0@1000 {
+				sec_jr0: jr@1000 {
 					 compatible = "fsl,sec-v4.0-job-ring";
 					 reg = <0x1000 0x1000>;
 					 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr1: jr1@2000 {
+				sec_jr1: jr@2000 {
 					 compatible = "fsl,sec-v4.0-job-ring";
 					 reg = <0x2000 0x1000>;
 					 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
 				};
 
-				sec_jr2: jr2@3000 {
+				sec_jr2: jr@3000 {
 					 compatible = "fsl,sec-v4.0-job-ring";
 					 reg = <0x3000 0x1000>;
 					 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
@@ -696,8 +753,8 @@
 		};
 
 		aips4: bus@32c00000 {
-			compatible = "simple-bus";
-			reg = <0x32c00000 0x400000>;
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x32df0000 0x10000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges;