diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2020-12-17 01:27:35 +0100 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2020-12-17 01:27:35 +0100 |
| commit | 9805529ec544ea7a82d891d5239a8ebd3dbb2a3e (patch) | |
| tree | d6b662fbd24e0be9623dab6a34e9f269462ab36b /arch/arm64/boot/dts/freescale | |
| parent | Merge tag 'arm-soc-defconfig-5.11' of git://git.kernel.org/pub/scm/linux/kern... (diff) | |
| parent | Merge branch 'sparx5-next' of https://github.com/microchip-ung/linux-upstream... (diff) | |
| download | linux-9805529ec544ea7a82d891d5239a8ebd3dbb2a3e.tar.xz linux-9805529ec544ea7a82d891d5239a8ebd3dbb2a3e.zip | |
Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.
As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.
The newly supported SoCs for this release are:
- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.
- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.
- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.
- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.
- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.
- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.
For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:
- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP
- A reference board for the Marvell Armada 382
- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.
- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.
- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard
- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module
- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)
- Ouya Game Console based on Nvidia Tegra 3
- Version 5 of the already supported Zynq Z-Turn MYIR Board
- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A
- A series of Kontron i.MX8M Mini baseboard/SoM versions
- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,
- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040
- Microsoft Lumia 950 XL, a phone
- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively
- Three new board variants of the "Trogdor" Chromebook (sc7180)
- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards
- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399
- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"
* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...
Diffstat (limited to 'arch/arm64/boot/dts/freescale')
30 files changed, 2681 insertions, 346 deletions
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index f8d59433af01..6f0777ee6cd6 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -27,10 +27,12 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-clearfog-cx.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-honeycomb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2160a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-lx2162a-qds.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-beacon-kit.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-ddr4-evk.dtb +dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-evk.dtb dtb-$(CONFIG_ARCH_MXC) += imx8mn-ddr4-evk.dtb diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index 6a2c09199047..626b709d1fb9 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -291,43 +291,46 @@ compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <0 33 0x4>; - fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; - fsl,tmu-calibration = <0x00000000 0x00000026 - 0x00000001 0x0000002d + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x60062>; + fsl,tmu-calibration = <0x00000000 0x00000025 + 0x00000001 0x0000002c 0x00000002 0x00000032 0x00000003 0x00000039 0x00000004 0x0000003f 0x00000005 0x00000046 - 0x00000006 0x0000004d - 0x00000007 0x00000054 - 0x00000008 0x0000005a - 0x00000009 0x00000061 - 0x0000000a 0x0000006a - 0x0000000b 0x00000071 - - 0x00010000 0x00000025 - 0x00010001 0x0000002c + 0x00000006 0x0000004c + 0x00000007 0x00000053 + 0x00000008 0x00000059 + 0x00000009 0x0000005f + 0x0000000a 0x00000066 + 0x0000000b 0x0000006c + + 0x00010000 0x00000026 + 0x00010001 0x0000002d 0x00010002 0x00000035 0x00010003 0x0000003d 0x00010004 0x00000045 - 0x00010005 0x0000004e - 0x00010006 0x00000057 - 0x00010007 0x00000061 - 0x00010008 0x0000006b - 0x00010009 0x00000076 - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000049 - 0x00020004 0x00000056 - 0x00020005 0x00000061 - 0x00020006 0x0000006d - - 0x00030000 0x00000021 - 0x00030001 0x0000002a - 0x00030002 0x0000003c - 0x00030003 0x0000004e>; + 0x00010005 0x0000004d + 0x00010006 0x00000055 + 0x00010007 0x0000005d + 0x00010008 0x00000065 + 0x00010009 0x0000006d + + 0x00020000 0x00000026 + 0x00020001 0x00000030 + 0x00020002 0x0000003a + 0x00020003 0x00000044 + 0x00020004 0x0000004e + 0x00020005 0x00000059 + 0x00020006 0x00000063 + + 0x00030000 0x00000014 + 0x00030001 0x00000021 + 0x00030002 0x0000002e + 0x00030003 0x0000003a + 0x00030004 0x00000047 + 0x00030005 0x00000053 + 0x00030006 0x00000060>; big-endian; #thermal-sensor-cells = <1>; }; @@ -401,7 +404,7 @@ #interrupt-cells = <2>; }; - wdog0: wdog@2ad0000 { + wdog0: watchdog@2ad0000 { compatible = "fsl,ls1012a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; @@ -454,7 +457,7 @@ <&clockgen 4 3>; }; - usb0: usb3@2f00000 { + usb0: usb@2f00000 { compatible = "snps,dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = <0 60 0x4>; @@ -475,7 +478,7 @@ status = "disabled"; }; - usb1: usb2@8600000 { + usb1: usb@8600000 { compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; reg = <0x0 0x8600000 0x0 0x1000>; interrupts = <0 139 0x4>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts index 8161dd237971..0516076087ae 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28.dts @@ -23,6 +23,8 @@ serial2 = &lpuart1; spi0 = &fspi; spi1 = &dspi2; + mmc0 = &esdhc1; + mmc1 = &esdhc; }; buttons0 { @@ -60,6 +62,10 @@ }; }; +&can0 { + status = "okay"; +}; + &dspi2 { status = "okay"; }; @@ -155,20 +161,10 @@ }; partition@210000 { - reg = <0x210000 0x0f0000>; + reg = <0x210000 0x1d0000>; label = "bootloader"; }; - partition@300000 { - reg = <0x300000 0x040000>; - label = "DP firmware"; - }; - - partition@340000 { - reg = <0x340000 0x0a0000>; - label = "trusted firmware"; - }; - partition@3e0000 { reg = <0x3e0000 0x020000>; label = "bootloader environment"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts index 13cdc958ba3e..c0786b713791 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts @@ -23,6 +23,8 @@ gpio2 = &gpio3; serial0 = &duart0; serial1 = &duart1; + mmc0 = &esdhc; + mmc1 = &esdhc1; }; chosen { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts index 1efb61cff454..c1d1ba459307 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts @@ -19,6 +19,8 @@ crypto = &crypto; serial0 = &duart0; serial1 = &duart1; + mmc0 = &esdhc; + mmc1 = &esdhc1; }; chosen { diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi index 7a6fb7e1fb82..60ff19fa53b4 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi @@ -90,6 +90,14 @@ clocks = <&osc_27m>; }; + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + status = "disabled"; + }; + }; + reboot { compatible ="syscon-reboot"; regmap = <&rst>; @@ -309,7 +317,7 @@ <0x0 0x20000000 0x0 0x10000000>; reg-names = "fspi_base", "fspi_mmap"; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clocks = <&clockgen 2 0>, <&clockgen 2 0>; clock-names = "fspi_en", "fspi"; status = "disabled"; }; @@ -386,6 +394,24 @@ status = "disabled"; }; + can0: can@2180000 { + compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysclk>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + can1: can@2190000 { + compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan"; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysclk>, <&clockgen 4 1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + duart0: serial@21c0500 { compatible = "fsl,ns16550", "ns16550a"; reg = <0x00 0x21c0500 0x0 0x100>; @@ -934,7 +960,7 @@ ethernet@0,4 { compatible = "fsl,enetc-ptp"; reg = <0x000400 0 0 0 0>; - clocks = <&clockgen 4 0>; + clocks = <&clockgen 2 3>; little-endian; fsl,extts-fifo; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index 0464b8aa4bc4..bbae4b353d3f 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -403,43 +403,47 @@ compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <0 33 0x4>; - fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; - fsl,tmu-calibration = <0x00000000 0x00000026 - 0x00000001 0x0000002d - 0x00000002 0x00000032 - 0x00000003 0x00000039 - 0x00000004 0x0000003f - 0x00000005 0x00000046 - 0x00000006 0x0000004d - 0x00000007 0x00000054 - 0x00000008 0x0000005a - 0x00000009 0x00000061 - 0x0000000a 0x0000006a - 0x0000000b 0x00000071 - - 0x00010000 0x00000025 - 0x00010001 0x0000002c - 0x00010002 0x00000035 - 0x00010003 0x0000003d - 0x00010004 0x00000045 - 0x00010005 0x0000004e - 0x00010006 0x00000057 - 0x00010007 0x00000061 - 0x00010008 0x0000006b - 0x00010009 0x00000076 - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000049 - 0x00020004 0x00000056 - 0x00020005 0x00000061 - 0x00020006 0x0000006d - - 0x00030000 0x00000021 - 0x00030001 0x0000002a - 0x00030002 0x0000003c - 0x00030003 0x0000004e>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; + fsl,tmu-calibration = <0x00000000 0x00000023 + 0x00000001 0x0000002a + 0x00000002 0x00000031 + 0x00000003 0x00000037 + 0x00000004 0x0000003e + 0x00000005 0x00000044 + 0x00000006 0x0000004b + 0x00000007 0x00000051 + 0x00000008 0x00000058 + 0x00000009 0x0000005e + 0x0000000a 0x00000065 + 0x0000000b 0x0000006b + + 0x00010000 0x00000023 + 0x00010001 0x0000002b + 0x00010002 0x00000033 + 0x00010003 0x0000003b + 0x00010004 0x00000043 + 0x00010005 0x0000004b + 0x00010006 0x00000054 + 0x00010007 0x0000005c + 0x00010008 0x00000064 + 0x00010009 0x0000006c + + 0x00020000 0x00000021 + 0x00020001 0x0000002c + 0x00020002 0x00000036 + 0x00020003 0x00000040 + 0x00020004 0x0000004b + 0x00020005 0x00000055 + 0x00020006 0x0000005f + + 0x00030000 0x00000013 + 0x00030001 0x0000001d + 0x00030002 0x00000028 + 0x00030003 0x00000032 + 0x00030004 0x0000003d + 0x00030005 0x00000047 + 0x00030006 0x00000052 + 0x00030007 0x0000005c>; #thermal-sensor-cells = <1>; }; @@ -725,7 +729,7 @@ status = "disabled"; }; - wdog0: wdog@2ad0000 { + wdog0: watchdog@2ad0000 { compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt"; reg = <0x0 0x2ad0000 0x0 0x10000>; interrupts = <0 83 0x4>; @@ -750,7 +754,7 @@ <&clockgen 4 0>; }; - usb0: usb3@2f00000 { + usb0: usb@2f00000 { compatible = "snps,dwc3"; reg = <0x0 0x2f00000 0x0 0x10000>; interrupts = <0 60 0x4>; @@ -761,7 +765,7 @@ status = "disabled"; }; - usb1: usb3@3000000 { + usb1: usb@3000000 { compatible = "snps,dwc3"; reg = <0x0 0x3000000 0x0 0x10000>; interrupts = <0 61 0x4>; @@ -772,7 +776,7 @@ status = "disabled"; }; - usb2: usb3@3100000 { + usb2: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <0 63 0x4>; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 1fa39bacff4b..025e1f587662 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -400,45 +400,49 @@ compatible = "fsl,qoriq-tmu"; reg = <0x0 0x1f00000 0x0 0x10000>; interrupts = <0 33 0x4>; - fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x70062>; fsl,tmu-calibration = /* Calibration data group 1 */ - <0x00000000 0x00000026 - 0x00000001 0x0000002d - 0x00000002 0x00000032 - 0x00000003 0x00000039 - 0x00000004 0x0000003f - 0x00000005 0x00000046 - 0x00000006 0x0000004d - 0x00000007 0x00000054 - 0x00000008 0x0000005a - 0x00000009 0x00000061 - 0x0000000a 0x0000006a - 0x0000000b 0x00000071 + <0x00000000 0x00000023 + 0x00000001 0x00000029 + 0x00000002 0x0000002f + 0x00000003 0x00000036 + 0x00000004 0x0000003c + 0x00000005 0x00000042 + 0x00000006 0x00000049 + 0x00000007 0x0000004f + 0x00000008 0x00000055 + 0x00000009 0x0000005c + 0x0000000a 0x00000062 + 0x0000000b 0x00000068 /* Calibration data group 2 */ - 0x00010000 0x00000025 - 0x00010001 0x0000002c - 0x00010002 0x00000035 - 0x00010003 0x0000003d - 0x00010004 0x00000045 - 0x00010005 0x0000004e - 0x00010006 0x00000057 - 0x00010007 0x00000061 - 0x00010008 0x0000006b - 0x00010009 0x00000076 + 0x00010000 0x00000022 + 0x00010001 0x0000002a + 0x00010002 0x00000032 + 0x00010003 0x0000003a + 0x00010004 0x00000042 + 0x00010005 0x0000004a + 0x00010006 0x00000052 + 0x00010007 0x0000005a + 0x00010008 0x00000062 + 0x00010009 0x0000006a /* Calibration data group 3 */ - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000049 - 0x00020004 0x00000056 - 0x00020005 0x00000061 - 0x00020006 0x0000006d + 0x00020000 0x00000021 + 0x00020001 0x0000002b + 0x00020002 0x00000035 + 0x00020003 0x0000003e + 0x00020004 0x00000048 + 0x00020005 0x00000052 + 0x00020006 0x0000005c /* Calibration data group 4 */ - 0x00030000 0x00000021 - 0x00030001 0x0000002a - 0x00030002 0x0000003c - 0x00030003 0x0000004e>; + 0x00030000 0x00000011 + 0x00030001 0x0000001a + 0x00030002 0x00000024 + 0x00030003 0x0000002e + 0x00030004 0x00000038 + 0x00030005 0x00000042 + 0x00030006 0x0000004c + 0x00030007 0x00000056>; big-endian; #thermal-sensor-cells = <1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts index 5633e59febc3..528ec72d0b83 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -17,6 +17,113 @@ compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; }; +&dpmac2 { + phy-handle = <&mdio2_aquantia_phy>; + phy-connection-type = "10gbase-r"; + pcs-handle = <&pcs2>; +}; + +&dpmac3 { + phy-handle = <&mdio1_phy5>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_0>; +}; + +&dpmac4 { + phy-handle = <&mdio1_phy6>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_1>; +}; + +&dpmac5 { + phy-handle = <&mdio1_phy7>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_2>; +}; + +&dpmac6 { + phy-handle = <&mdio1_phy8>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs3_3>; +}; + +&dpmac7 { + phy-handle = <&mdio1_phy1>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_0>; +}; + +&dpmac8 { + phy-handle = <&mdio1_phy2>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_1>; +}; + +&dpmac9 { + phy-handle = <&mdio1_phy3>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_2>; +}; + +&dpmac10 { + phy-handle = <&mdio1_phy4>; + phy-connection-type = "qsgmii"; + managed = "in-band-status"; + pcs-handle = <&pcs7_3>; +}; + +&emdio1 { + status = "okay"; + + mdio1_phy5: ethernet-phy@c { + reg = <0xc>; + }; + + mdio1_phy6: ethernet-phy@d { + reg = <0xd>; + }; + + mdio1_phy7: ethernet-phy@e { + reg = <0xe>; + }; + + mdio1_phy8: ethernet-phy@f { + reg = <0xf>; + }; + + mdio1_phy1: ethernet-phy@1c { + reg = <0x1c>; + }; + + mdio1_phy2: ethernet-phy@1d { + reg = <0x1d>; + }; + + mdio1_phy3: ethernet-phy@1e { + reg = <0x1e>; + }; + + mdio1_phy4: ethernet-phy@1f { + reg = <0x1f>; + }; +}; + +&emdio2 { + status = "okay"; + + mdio2_aquantia_phy: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; +}; + &i2c0 { status = "okay"; @@ -87,6 +194,18 @@ status = "okay"; }; +&pcs_mdio2 { + status = "okay"; +}; + +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio7 { + status = "okay"; +}; + &qspi { status = "okay"; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi index 692d8f4a206d..6403455ed039 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -420,7 +420,7 @@ status = "disabled"; }; - usb0: usb3@3100000 { + usb0: usb@3100000 { compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; @@ -431,7 +431,7 @@ status = "disabled"; }; - usb1: usb3@3110000 { + usb1: usb@3110000 { compatible = "snps,dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; @@ -517,6 +517,17 @@ status = "disabled"; }; + pcie_ep1: pcie-ep@3400000 { + compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + reg = <0x00 0x03400000 0x0 0x00100000 + 0x20 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <24>; + num-ob-windows = <256>; + max-functions = /bits/ 8 <2>; + status = "disabled"; + }; + pcie2: pcie@3500000 { compatible = "fsl,ls1088a-pcie"; reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ @@ -543,6 +554,16 @@ status = "disabled"; }; + pcie_ep2: pcie-ep@3500000 { + compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + reg = <0x00 0x03500000 0x0 0x00100000 + 0x28 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <6>; + status = "disabled"; + }; + pcie3: pcie@3600000 { compatible = "fsl,ls1088a-pcie"; reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ @@ -569,6 +590,16 @@ status = "disabled"; }; + pcie_ep3: pcie-ep@3600000 { + compatible = "fsl,ls1088a-pcie-ep", "fsl,ls-pcie-ep"; + reg = <0x00 0x03600000 0x0 0x00100000 + 0x30 0x00000000 0x8 0x00000000>; + reg-names = "regs", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <6>; + status = "disabled"; + }; + smmu: iommu@5000000 { compatible = "arm,mmu-500"; reg = <0 0x5000000 0 0x800000>; @@ -672,6 +703,87 @@ fsl,extts-fifo; }; + emdio1: mdio@8b96000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b96000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + emdio2: mdio@8b97000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b97000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pcs_mdio2: mdio@8c0b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs2: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio3: mdio@8c0f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs3_0: ethernet-phy@0 { + reg = <0>; + }; + + pcs3_1: ethernet-phy@1 { + reg = <1>; + }; + + pcs3_2: ethernet-phy@2 { + reg = <2>; + }; + + pcs3_3: ethernet-phy@3 { + reg = <3>; + }; + }; + + pcs_mdio7: mdio@8c1f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs7_0: ethernet-phy@0 { + reg = <0>; + }; + + pcs7_1: ethernet-phy@1 { + reg = <1>; + }; + + pcs7_2: ethernet-phy@2 { + reg = <2>; + }; + + pcs7_3: ethernet-phy@3 { + reg = <3>; + }; + }; + cluster1_core0_watchdog: wdt@c000000 { compatible = "arm,sp805-wdt", "arm,primecell"; reg = <0x0 0xc000000 0x0 0x1000>; @@ -749,52 +861,52 @@ #address-cells = <1>; #size-cells = <0>; - dpmac1: dpmac@1 { + dpmac1: ethernet@1 { compatible = "fsl,qoriq-mc-dpmac"; reg = <1>; }; - dpmac2: dpmac@2 { + dpmac2: ethernet@2 { compatible = "fsl,qoriq-mc-dpmac"; reg = <2>; }; - dpmac3: dpmac@3 { + dpmac3: ethernet@3 { compatible = "fsl,qoriq-mc-dpmac"; reg = <3>; }; - dpmac4: dpmac@4 { + dpmac4: ethernet@4 { compatible = "fsl,qoriq-mc-dpmac"; reg = <4>; }; - dpmac5: dpmac@5 { + dpmac5: ethernet@5 { compatible = "fsl,qoriq-mc-dpmac"; reg = <5>; }; - dpmac6: dpmac@6 { + dpmac6: ethernet@6 { compatible = "fsl,qoriq-mc-dpmac"; reg = <6>; }; - dpmac7: dpmac@7 { + dpmac7: ethernet@7 { compatible = "fsl,qoriq-mc-dpmac"; reg = <7>; }; - dpmac8: dpmac@8 { + dpmac8: ethernet@8 { compatible = "fsl,qoriq-mc-dpmac"; reg = <8>; }; - dpmac9: dpmac@9 { + dpmac9: ethernet@9 { compatible = "fsl,qoriq-mc-dpmac"; reg = <9>; }; - dpmac10: dpmac@a { + dpmac10: ethernet@a { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xa>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts index f6b4d75a258b..60563917be44 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -22,3 +22,123 @@ stdout-path = "serial1:115200n8"; }; }; + +&dpmac1 { + phy-handle = <&mdio1_phy1>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac2 { + phy-handle = <&mdio1_phy2>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac3 { + phy-handle = <&mdio1_phy3>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac4 { + phy-handle = <&mdio1_phy4>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac5 { + phy-handle = <&mdio2_phy1>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac6 { + phy-handle = <&mdio2_phy2>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac7 { + phy-handle = <&mdio2_phy3>; + phy-connection-type = "10gbase-r"; +}; + +&dpmac8 { + phy-handle = <&mdio2_phy4>; + phy-connection-type = "10gbase-r"; +}; + +&emdio1 { + status = "okay"; + + mdio1_phy1: ethernet-phy@10 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x10>; + }; + + mdio1_phy2: ethernet-phy@11 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x11>; + }; + + mdio1_phy3: ethernet-phy@12 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x12>; + }; + + mdio1_phy4: ethernet-phy@13 { + compatible = "ethernet-phy-id13e5.1002"; + reg = <0x13>; + }; +}; + +&emdio2 { + status = "okay"; + + mdio2_phy1: ethernet-phy@0 { + compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + reg = <0x0>; + }; + + mdio2_phy2: ethernet-phy@1 { + compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + reg = <0x1>; + }; + + mdio2_phy3: ethernet-phy@2 { + compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + reg = <0x2>; + }; + + mdio2_phy4: ethernet-phy@3 { + compatible = "ethernet-phy-id03a1.b4b0", "ethernet-phy-ieee802.3-c45"; + reg = <0x3>; + }; +}; + +&pcs_mdio1 { + status = "okay"; +}; + +&pcs_mdio2 { + status = "okay"; +}; + +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio4 { + status = "okay"; +}; + +&pcs_mdio5 { + status = "okay"; +}; + +&pcs_mdio6 { + status = "okay"; +}; + +&pcs_mdio7 { + status = "okay"; +}; + +&pcs_mdio8 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi index e7abb74bd816..c68901f8c6f0 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -458,6 +458,232 @@ fsl,extts-fifo; }; + emdio1: mdio@8b96000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b96000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + emdio2: mdio@8b97000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8b97000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pcs_mdio1: mdio@8c07000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c07000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs1: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio2: mdio@8c0b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs2: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio3: mdio@8c0f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs3: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio4: mdio@8c13000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c13000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs4: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio5: mdio@8c17000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c17000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs5: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio6: mdio@8c1b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs6: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio7: mdio@8c1f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs7: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio8: mdio@8c23000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c23000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs8: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio9: mdio@8c27000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c27000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs9: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio10: mdio@8c2b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c2b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs10: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio11: mdio@8c2f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c2f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs11: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio12: mdio@8c33000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c33000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs12: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio13: mdio@8c37000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c37000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs13: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio14: mdio@8c3b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c3b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs14: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio15: mdio@8c3f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c3f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs15: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio16: mdio@8c43000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c43000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs16: ethernet-phy@0 { + reg = <0>; + }; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ @@ -482,84 +708,100 @@ #address-cells = <1>; #size-cells = <0>; - dpmac1: dpmac@1 { + dpmac1: ethernet@1 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x1>; + pcs-handle = <&pcs1>; }; - dpmac2: dpmac@2 { + dpmac2: ethernet@2 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x2>; + pcs-handle = <&pcs2>; }; - dpmac3: dpmac@3 { + dpmac3: ethernet@3 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x3>; + pcs-handle = <&pcs3>; }; - dpmac4: dpmac@4 { + dpmac4: ethernet@4 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x4>; + pcs-handle = <&pcs4>; }; - dpmac5: dpmac@5 { + dpmac5: ethernet@5 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x5>; + pcs-handle = <&pcs5>; }; - dpmac6: dpmac@6 { + dpmac6: ethernet@6 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x6>; + pcs-handle = <&pcs6>; }; - dpmac7: dpmac@7 { + dpmac7: ethernet@7 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x7>; + pcs-handle = <&pcs7>; }; - dpmac8: dpmac@8 { + dpmac8: ethernet@8 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x8>; + pcs-handle = <&pcs8>; }; - dpmac9: dpmac@9 { + dpmac9: ethernet@9 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x9>; + pcs-handle = <&pcs9>; }; - dpmac10: dpmac@a { + dpmac10: ethernet@a { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xa>; + pcs-handle = <&pcs10>; }; - dpmac11: dpmac@b { + dpmac11: ethernet@b { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xb>; + pcs-handle = <&pcs11>; }; - dpmac12: dpmac@c { + dpmac12: ethernet@c { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xc>; + pcs-handle = <&pcs12>; }; - dpmac13: dpmac@d { + dpmac13: ethernet@d { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xd>; + pcs-handle = <&pcs13>; }; - dpmac14: dpmac@e { + dpmac14: ethernet@e { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xe>; + pcs-handle = <&pcs14>; }; - dpmac15: dpmac@f { + dpmac15: ethernet@f { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xf>; + pcs-handle = <&pcs15>; }; - dpmac16: dpmac@10 { + dpmac16: ethernet@10 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x10>; + pcs-handle = <&pcs16>; }; }; }; @@ -860,7 +1102,7 @@ dma-coherent; }; - usb0: usb3@3100000 { + usb0: usb@3100000 { status = "disabled"; compatible = "snps,dwc3"; reg = <0x0 0x3100000 0x0 0x10000>; @@ -871,7 +1113,7 @@ snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; }; - usb1: usb3@3110000 { + usb1: usb@3110000 { status = "disabled"; compatible = "snps,dwc3"; reg = <0x0 0x3110000 0x0 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts index 54fe8cd3a711..7723ad5efd37 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts @@ -35,6 +35,18 @@ status = "okay"; }; +&dpmac3 { + phy-handle = <&aquantia_phy1>; + phy-connection-type = "usxgmii"; + managed = "in-band-status"; +}; + +&dpmac4 { + phy-handle = <&aquantia_phy2>; + phy-connection-type = "usxgmii"; + managed = "in-band-status"; +}; + &dpmac17 { phy-handle = <&rgmii_phy1>; phy-connection-type = "rgmii-id"; @@ -61,6 +73,18 @@ reg = <0x2>; eee-broken-1000t; }; + + aquantia_phy1: ethernet-phy@4 { + /* AQR107 PHY */ + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x4>; + }; + + aquantia_phy2: ethernet-phy@5 { + /* AQR107 PHY */ + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0x5>; + }; }; &esdhc0 { @@ -156,6 +180,14 @@ }; }; +&pcs_mdio3 { + status = "okay"; +}; + +&pcs_mdio4 { + status = "okay"; +}; + &sata0 { status = "okay"; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi index 83072da6f6c6..197397777c83 100644 --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi @@ -1305,6 +1305,240 @@ status = "disabled"; }; + pcs_mdio1: mdio@8c07000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c07000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs1: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio2: mdio@8c0b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs2: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio3: mdio@8c0f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c0f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs3: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio4: mdio@8c13000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c13000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs4: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio5: mdio@8c17000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c17000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs5: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio6: mdio@8c1b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs6: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio7: mdio@8c1f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c1f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs7: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio8: mdio@8c23000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c23000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs8: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio9: mdio@8c27000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c27000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs9: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio10: mdio@8c2b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c2b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs10: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio11: mdio@8c2f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c2f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs11: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio12: mdio@8c33000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c33000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs12: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio13: mdio@8c37000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c37000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs13: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio14: mdio@8c3b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c3b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs14: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio15: mdio@8c3f000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c3f000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs15: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio16: mdio@8c43000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c43000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs16: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio17: mdio@8c47000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c47000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs17: ethernet-phy@0 { + reg = <0>; + }; + }; + + pcs_mdio18: mdio@8c4b000 { + compatible = "fsl,fman-memac-mdio"; + reg = <0x0 0x8c4b000 0x0 0x1000>; + little-endian; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + pcs18: ethernet-phy@0 { + reg = <0>; + }; + }; + fsl_mc: fsl-mc@80c000000 { compatible = "fsl,qoriq-mc"; reg = <0x00000008 0x0c000000 0 0x40>, @@ -1330,94 +1564,112 @@ #address-cells = <1>; #size-cells = <0>; - dpmac1: dpmac@1 { + dpmac1: ethernet@1 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x1>; + pcs-handle = <&pcs1>; }; - dpmac2: dpmac@2 { + dpmac2: ethernet@2 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x2>; + pcs-handle = <&pcs2>; }; - dpmac3: dpmac@3 { + dpmac3: ethernet@3 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x3>; + pcs-handle = <&pcs3>; }; - dpmac4: dpmac@4 { + dpmac4: ethernet@4 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x4>; + pcs-handle = <&pcs4>; }; - dpmac5: dpmac@5 { + dpmac5: ethernet@5 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x5>; + pcs-handle = <&pcs5>; }; - dpmac6: dpmac@6 { + dpmac6: ethernet@6 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x6>; + pcs-handle = <&pcs6>; }; - dpmac7: dpmac@7 { + dpmac7: ethernet@7 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x7>; + pcs-handle = <&pcs7>; }; - dpmac8: dpmac@8 { + dpmac8: ethernet@8 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x8>; + pcs-handle = <&pcs8>; }; - dpmac9: dpmac@9 { + dpmac9: ethernet@9 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x9>; + pcs-handle = <&pcs9>; }; - dpmac10: dpmac@a { + dpmac10: ethernet@a { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xa>; + pcs-handle = <&pcs10>; }; - dpmac11: dpmac@b { + dpmac11: ethernet@b { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xb>; + pcs-handle = <&pcs11>; }; - dpmac12: dpmac@c { + dpmac12: ethernet@c { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xc>; + pcs-handle = <&pcs12>; }; - dpmac13: dpmac@d { + dpmac13: ethernet@d { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xd>; + pcs-handle = <&pcs13>; }; - dpmac14: dpmac@e { + dpmac14: ethernet@e { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xe>; + pcs-handle = <&pcs14>; }; - dpmac15: dpmac@f { + dpmac15: ethernet@f { compatible = "fsl,qoriq-mc-dpmac"; reg = <0xf>; + pcs-handle = <&pcs15>; }; - dpmac16: dpmac@10 { + dpmac16: ethernet@10 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x10>; + pcs-handle = <&pcs16>; }; - dpmac17: dpmac@11 { + dpmac17: ethernet@11 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x11>; + pcs-handle = <&pcs17>; }; - dpmac18: dpmac@12 { + dpmac18: ethernet@12 { compatible = "fsl,qoriq-mc-dpmac"; reg = <0x12>; + pcs-handle = <&pcs18>; }; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts new file mode 100644 index 000000000000..91786848bd30 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-lx2162a-qds.dts @@ -0,0 +1,334 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +// +// Device Tree file for LX2162AQDS +// +// Copyright 2020 NXP + +/dts-v1/; + +#include "fsl-lx2160a.dtsi" + +/ { + model = "NXP Layerscape LX2162AQDS"; + compatible = "fsl,lx2162a-qds", "fsl,lx2160a"; + + aliases { + crypto = &crypto; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + sb_3v3: regulator-sb3v3 { + compatible = "regulator-fixed"; + regulator-name = "LTM4619-3.3VSB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + mdio-mux-1 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 0>; + mdio-parent-bus = <&emdio1>; + #address-cells=<1>; + #size-cells = <0>; + + mdio@0 { /* On-board RTL8211F PHY #1 RGMII1 */ + reg = <0x00>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy1: ethernet-phy@1 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x1>; + eee-broken-1000t; + }; + }; + + mdio@8 { /* On-board RTL8211F PHY #2 RGMII2 */ + reg = <0x8>; + #address-cells = <1>; + #size-cells = <0>; + + rgmii_phy2: ethernet-phy@2 { + compatible = "ethernet-phy-id001c.c916"; + reg = <0x2>; + eee-broken-1000t; + }; + }; + + mdio@18 { /* Slot #1 */ + reg = <0x18>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@19 { /* Slot #2 */ + reg = <0x19>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1a { /* Slot #3 */ + reg = <0x1a>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1b { /* Slot #4 */ + reg = <0x1b>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1c { /* Slot #5 */ + reg = <0x1c>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1d { /* Slot #6 */ + reg = <0x1d>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1e { /* Slot #7 */ + reg = <0x1e>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1f { /* Slot #8 */ + reg = <0x1f>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio-mux-2 { + compatible = "mdio-mux-multiplexer"; + mux-controls = <&mux 1>; + mdio-parent-bus = <&emdio2>; + #address-cells=<1>; + #size-cells = <0>; + + mdio@0 { /* Slot #1 (secondary EMI) */ + reg = <0x00>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@1 { /* Slot #2 (secondary EMI) */ + reg = <0x01>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@2 { /* Slot #3 (secondary EMI) */ + reg = <0x02>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@3 { /* Slot #4 (secondary EMI) */ + reg = <0x03>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@4 { /* Slot #5 (secondary EMI) */ + reg = <0x04>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@5 { /* Slot #6 (secondary EMI) */ + reg = <0x05>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@6 { /* Slot #7 (secondary EMI) */ + reg = <0x06>; + #address-cells = <1>; + #size-cells = <0>; + }; + + mdio@7 { /* Slot #8 (secondary EMI) */ + reg = <0x07>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +&crypto { + status = "okay"; +}; + +&dpmac17 { + phy-handle = <&rgmii_phy1>; + phy-connection-type = "rgmii-id"; +}; + +&dpmac18 { + phy-handle = <&rgmii_phy2>; + phy-connection-type = "rgmii-id"; +}; + +&dspi0 { + status = "okay"; + + dflash0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi1 { + status = "okay"; + + dflash1: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&dspi2 { + status = "okay"; + + dflash2: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <1000000>; + }; +}; + +&emdio1 { + status = "okay"; +}; + +&emdio2 { + status = "okay"; +}; + +&esdhc0 { + status = "okay"; +}; + +&esdhc1 { + status = "okay"; +}; + +&fspi { + status = "okay"; + + mt35xu512aba0: flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + m25p,fast-read; + spi-max-frequency = <50000000>; + reg = <0>; + spi-rx-bus-width = <8>; + spi-tx-bus-width = <8>; + }; +}; + +&i2c0 { + status = "okay"; + + fpga@66 { + compatible = "fsl,lx2160aqds-fpga", "fsl,fpga-qixis-i2c", + "simple-mfd"; + reg = <0x66>; + + mux: mux-controller { + compatible = "reg-mux"; + #mux-control-cells = <1>; + mux-reg-masks = <0x54 0xf8>, /* 0: reg 0x54, bits 7:3 */ + <0x54 0x07>; /* 1: reg 0x54, bit 2:0 */ + }; + }; + + i2c-mux@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + power-monitor@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + + power-monitor@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temperature-sensor@4c { + compatible = "nxp,sa56004"; + reg = <0x4c>; + vcc-supply = <&sb_3v3>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + }; + }; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&sata2 { + status = "okay"; +}; + +&sata3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi index b88c3c99b007..d897913537ca 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi @@ -4,6 +4,11 @@ */ / { + aliases { + rtc0 = &rtc; + rtc1 = &snvs_rtc; + }; + usdhc1_pwrseq: usdhc1_pwrseq { compatible = "mmc-pwrseq-simple"; pinctrl-names = "default"; @@ -24,6 +29,18 @@ cpu-supply = <&buck2_reg>; }; +&A53_1 { + cpu-supply = <&buck2_reg>; +}; + +&A53_2 { + cpu-supply = <&buck2_reg>; +}; + +&A53_3 { + cpu-supply = <&buck2_reg>; +}; + &ddrc { operating-points-v2 = <&ddrc_opp_table>; @@ -63,6 +80,22 @@ }; }; +&flexspi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi>; + status = "okay"; + + flash@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <80000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + }; +}; + &i2c1 { clock-frequency = <400000>; pinctrl-names = "default"; @@ -78,6 +111,10 @@ interrupts = <3 IRQ_TYPE_LEVEL_LOW>; rohm,reset-snvs-powered; + #clock-cells = <0>; + clocks = <&osc_32k 0>; + clock-output-names = "clk-32k-out"; + regulators { buck1_reg: BUCK1 { regulator-name = "buck1"; @@ -191,7 +228,7 @@ reg = <0x50>; }; - rtc@51 { + rtc: rtc@51 { compatible = "nxp,pcf85263"; reg = <0x51>; }; @@ -258,155 +295,166 @@ }; &iomuxc { - pinctrl_fec1: fec1grp { - fsl,pins = < - MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 - MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 - MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f - MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f - MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f - MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f - MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 - MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 - MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 - MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 - MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f - MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 - MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 - MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f - MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 - >; - }; + pinctrl_fec1: fec1grp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_RXC_GPIO4_IO22 0x19 + >; + }; - pinctrl_i2c1: i2c1grp { - fsl,pins = < - MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 - MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 - >; - }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 - MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 - >; - }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL 0x400001c3 + MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA 0x400001c3 + >; + }; - pinctrl_pmic: pmicirqgrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 - >; - }; + pinctrl_flexspi: flexspigrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK 0x1c2 + MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B 0x82 + MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0 0x82 + MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1 0x82 + MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2 0x82 + MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3 0x82 + >; + }; - pinctrl_uart1: uart1grp { - fsl,pins = < - MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 - MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 - MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 - MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 - MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 - MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19 - MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19 - MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141 - >; - }; + pinctrl_pmic: pmicirqgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x141 + >; + }; - pinctrl_usdhc1_gpio: usdhc1gpiogrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 - >; - }; + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_UART3_RXD_UART1_DCE_CTS_B 0x140 + MX8MM_IOMUXC_UART3_TXD_UART1_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SD1_DATA4_GPIO2_IO6 0x19 + MX8MM_IOMUXC_SD1_DATA5_GPIO2_IO7 0x19 + MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8 0x19 + MX8MM_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x141 + >; + }; - pinctrl_usdhc1: usdhc1grp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 - >; - }; + pinctrl_usdhc1_gpio: usdhc1gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_RESET_B_GPIO2_IO10 0x41 + >; + }; - pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 - >; - }; + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + >; + }; - pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 - MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 - MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 - MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 - MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 - MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 - >; - }; + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + >; + }; - pinctrl_usdhc3: usdhc3grp { - fsl,pins = < - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 - MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 - MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 - MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 - MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 - MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 - >; - }; + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + >; + }; - pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 - MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 - MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 - MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 - MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 - MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 - >; - }; + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x190 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d0 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d0 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d0 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d0 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d0 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d0 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d0 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d0 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d0 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x190 + >; + }; - pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { - fsl,pins = < - MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 - MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 - MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 - MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 - MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 - MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 - MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 - MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 - MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 - MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 - MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 - >; - }; + pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x194 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d4 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d4 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d4 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d4 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d4 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d4 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d4 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d4 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d4 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x194 + >; + }; - pinctrl_wdog: wdoggrp { - fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 - >; - }; + pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK 0x196 + MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD 0x1d6 + MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0 0x1d6 + MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1 0x1d6 + MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2 0x1d6 + MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3 0x1d6 + MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4 0x1d6 + MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5 0x1d6 + MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6 0x1d6 + MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7 0x1d6 + MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE 0x196 + >; + }; - pinctrl_wlan: wlangrp { - fsl,pins = < - MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x111 - >; - }; + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 + >; + }; + + pinctrl_wlan: wlangrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_DATA7_GPIO2_IO9 0x111 + >; + }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi index 521eb3a5a12e..6518f088b2c2 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi @@ -41,6 +41,14 @@ enable-active-high; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ir>; + linux,autosuspend-period = <125>; + }; + wm8524: audio-codec { #sound-dai-cells = <0>; compatible = "wlf,wm8524"; @@ -364,6 +372,12 @@ >; }; + pinctrl_ir: irgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f + >; + }; + pinctrl_gpio_wlf: gpiowlfgrp { fsl,pins = < MX8MM_IOMUXC_I2C4_SDA_GPIO5_IO21 0xd6 @@ -469,7 +483,7 @@ pinctrl_wdog: wdoggrp { fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts new file mode 100644 index 000000000000..d17abb515835 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-s.dts @@ -0,0 +1,322 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +/dts-v1/; + +#include "imx8mm-kontron-n801x-som.dtsi" + +/ { + model = "Kontron i.MX8MM N801X S"; + compatible = "kontron,imx8mm-n801x-s", "kontron,imx8mm-n801x-som", "fsl,imx8mm"; + + aliases { + ethernet1 = &usbnet; + }; + + /* fixed crystal dedicated to mcp2515 */ + osc_can: clock-osc-can { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "osc-can"; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_led>; + + led1 { + label = "led1"; + gpios = <&gpio4 17 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "led2"; + gpios = <&gpio4 19 GPIO_ACTIVE_LOW>; + }; + + led3 { + label = "led3"; + gpios = <&gpio4 18 GPIO_ACTIVE_LOW>; + }; + + led4 { + label = "led4"; + gpios = <&gpio4 8 GPIO_ACTIVE_LOW>; + }; + + led5 { + label = "led5"; + gpios = <&gpio4 9 GPIO_ACTIVE_LOW>; + }; + + led6 { + label = "led6"; + gpios = <&gpio4 7 GPIO_ACTIVE_LOW>; + }; + }; + + pwm-beeper { + compatible = "pwm-beeper"; + pwms = <&pwm2 0 5000 0>; + }; + + reg_rst_eth2: regulator-rst-eth2 { + compatible = "regulator-fixed"; + regulator-name = "rst-usb-eth2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_eth2>; + gpio = <&gpio3 2 GPIO_ACTIVE_LOW>; + }; + + reg_vdd_5v: regulator-5v { + compatible = "regulator-fixed"; + regulator-name = "vdd-5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; +}; + +&ecspi2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; + status = "okay"; + + can0: can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can>; + clocks = <&osc_can>; + interrupt-parent = <&gpio4>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <100000>; + vdd-supply = <®_vdd_3v3>; + xceiver-supply = <®_vdd_5v>; + }; +}; + +&ecspi3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-connection-type = "rgmii"; + phy-handle = <ðphy>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy: ethernet-phy@0 { + reg = <0>; + reset-assert-us = <100>; + reset-deassert-us = <100>; + reset-gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + rtc@32 { + compatible = "epson,rx8900"; + reg = <0x32>; + }; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + linux,rs485-enabled-at-boot-time; + uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + dr_mode = "otg"; + over-current-active-low; + status = "okay"; +}; + +&usbotg2 { + dr_mode = "host"; + disable-over-current; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + usb1@1 { + compatible = "usb424,9514"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + usbnet: usbether@1 { + compatible = "usb424,ec00"; + reg = <1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_nvcc_sd>; + cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio>; + + pinctrl_can: cangrp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_RXFS_GPIO4_IO28 0x19 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO 0x82 + MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x82 + MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x82 + MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13 0x19 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX8MM_IOMUXC_UART2_RXD_ECSPI3_MISO 0x82 + MX8MM_IOMUXC_UART1_TXD_ECSPI3_MOSI 0x82 + MX8MM_IOMUXC_UART1_RXD_ECSPI3_SCLK 0x82 + MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25 0x19 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX8MM_IOMUXC_ENET_MDC_ENET1_MDC 0x3 + MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO 0x3 + MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3 0x1f + MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2 0x1f + MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f + MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f + MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3 0x91 + MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2 0x91 + MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91 + MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91 + MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC 0x1f + MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC 0x91 + MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91 + MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f + MX8MM_IOMUXC_SAI2_MCLK_GPIO4_IO27 0x19 /* PHY RST */ + MX8MM_IOMUXC_SAI2_TXC_GPIO4_IO25 0x19 /* ETH IRQ */ + >; + }; + + pinctrl_gpio_led: gpioledgrp { + fsl,pins = < + MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19 + MX8MM_IOMUXC_SAI1_RXD5_GPIO4_IO7 0x19 + MX8MM_IOMUXC_SAI1_RXD6_GPIO4_IO8 0x19 + MX8MM_IOMUXC_SAI1_RXD7_GPIO4_IO9 0x19 + MX8MM_IOMUXC_SAI1_TXD5_GPIO4_IO17 0x19 + MX8MM_IOMUXC_SAI1_TXD6_GPIO4_IO18 0x19 + MX8MM_IOMUXC_SAI1_TXD7_GPIO4_IO19 0x19 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x19 + MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7 0x19 + MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9 0x19 + MX8MM_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x19 + MX8MM_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 + MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8 0x19 + MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10 0x19 + MX8MM_IOMUXC_SAI3_MCLK_GPIO5_IO2 0x19 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX8MM_IOMUXC_I2C4_SCL_I2C4_SCL 0x400001c3 + MX8MM_IOMUXC_I2C4_SDA_I2C4_SDA 0x400001c3 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX8MM_IOMUXC_SPDIF_RX_PWM2_OUT 0x19 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX8MM_IOMUXC_SAI2_RXC_UART1_DCE_RX 0x140 + MX8MM_IOMUXC_SAI2_RXFS_UART1_DCE_TX 0x140 + MX8MM_IOMUXC_SAI2_RXD0_UART1_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI2_TXFS_UART1_DCE_CTS_B 0x140 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX 0x140 + MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX 0x140 + MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B 0x140 + MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B 0x140 + >; + }; + + pinctrl_usb_eth2: usbeth2grp { + fsl,pins = < + MX8MM_IOMUXC_NAND_CE1_B_GPIO3_IO2 0x19 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK 0x190 + MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD 0x1d0 + MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0 0x1d0 + MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1 0x1d0 + MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2 0x1d0 + MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3 0x1d0 + MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12 0x019 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi new file mode 100644 index 000000000000..d0456daefda8 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-n801x-som.dtsi @@ -0,0 +1,294 @@ +// SPDX-License-Identifier: GPL-2.0+ OR MIT +/* + * Copyright (C) 2019 Kontron Electronics GmbH + */ + +#include "imx8mm.dtsi" + +/ { + model = "Kontron i.MX8MM N801X SoM"; + compatible = "kontron,imx8mm-n801x-som", "fsl,imx8mm"; + + memory@40000000 { + device_type = "memory"; + /* + * There are multiple SoM flavors with different DDR sizes. + * The smallest is 1GB. For larger sizes the bootloader will + * update the reg property. + */ + reg = <0x0 0x40000000 0 0x80000000>; + }; + + chosen { + stdout-path = &uart3; + }; +}; + +&A53_0 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_1 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_2 { + cpu-supply = <®_vdd_arm>; +}; + +&A53_3 { + cpu-supply = <®_vdd_arm>; +}; + +&ddrc { + operating-points-v2 = <&ddrc_opp_table>; + + ddrc_opp_table: opp-table { + compatible = "operating-points-v2"; + + opp-25M { + opp-hz = /bits/ 64 <25000000>; + }; + + opp-100M { + opp-hz = /bits/ 64 <100000000>; + }; + + opp-750M { + opp-hz = /bits/ 64 <750000000>; + }; + }; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + cs-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>; + status = "okay"; + + spi-flash@0 { + compatible = "mxicy,mx25r1635f", "jedec,spi-nor"; + spi-max-frequency = <80000000>; + reg = <0>; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pca9450: pmic@25 { + compatible = "nxp,pca9450a"; + reg = <0x25>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic>; + interrupt-parent = <&gpio1>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + + regulators { + reg_vdd_soc: BUCK1 { + regulator-name = "buck1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <3125>; + }; + + reg_vdd_arm: BUCK2 { + regulator-name = "buck2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <950000>; + regulator-boot-on; + regulator-ramp-delay = <3125>; + nxp,dvs-run-voltage = <950000>; + nxp,dvs-standby-voltage = <850000>; + }; + + reg_vdd_dram: BUCK3 { + regulator-name = "buck3"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_3v3: BUCK4 { + regulator-name = "buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_1v8: BUCK5 { + regulator-name = "buck5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_dram: BUCK6 { + regulator-name = "buck6"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_snvs: LDO1 { + regulator-name = "ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_snvs: LDO2 { + regulator-name = "ldo2"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdda: LDO3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_vdd_phy: LDO4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-boot-on; + regulator-always-on; + }; + + reg_nvcc_sd: LDO5 { + regulator-name = "ldo5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + }; + }; +}; + +&uart3 { /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + vmmc-supply = <®_vdd_3v3>; + vqmmc-supply = <®_vdd_1v8>; + bus-width = <8>; + non-removable; + status = "okay"; +}; + +&wdog1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_wdog>; + fsl,ext-reset-output; + status = "okay"; +}; + +&iomuxc { + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO 0x82 + MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI 0x82 + MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK 0x82 + MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9 0x19 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 + MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA 0x400001c3 + >; + }; + + pinctrl_pmic: pmicgrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x141 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX 0x140 + MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX 0x140 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x190 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d0 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d0 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d0 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d0 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d0 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d0 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d0 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d0 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d0 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x190 + >; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x194 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d4 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d4 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d4 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d4 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d4 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d4 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d4 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d4 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d4 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x194 + >; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = < + MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK 0x196 + MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD 0x1d6 + MX8MM_IOMUXC_SD1_DATA0_USDHC1_DATA0 0x1d6 + MX8MM_IOMUXC_SD1_DATA1_USDHC1_DATA1 0x1d6 + MX8MM_IOMUXC_SD1_DATA2_USDHC1_DATA2 0x1d6 + MX8MM_IOMUXC_SD1_DATA3_USDHC1_DATA3 0x1d6 + MX8MM_IOMUXC_SD1_DATA4_USDHC1_DATA4 0x1d6 + MX8MM_IOMUXC_SD1_DATA5_USDHC1_DATA5 0x1d6 + MX8MM_IOMUXC_SD1_DATA6_USDHC1_DATA6 0x1d6 + MX8MM_IOMUXC_SD1_DATA7_USDHC1_DATA7 0x1d6 + MX8MM_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0x019 + MX8MM_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x196 + >; + }; + + pinctrl_wdog: wdoggrp { + fsl,pins = < + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + >; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi index 49082529764f..1dc9d187601c 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi @@ -552,7 +552,7 @@ pinctrl_wdog: wdoggrp { fsl,pins = < - MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi index 05ee062548e4..c824f2615fe8 100644 --- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi @@ -194,16 +194,16 @@ pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_PPI 7 - (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; }; timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */ + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */ + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */ + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */ clock-frequency = <8000000>; arm,no-tick-in-suspend; }; @@ -339,6 +339,49 @@ status = "disabled"; }; + micfil: audio-controller@30080000 { + compatible = "fsl,imx8mm-micfil"; + reg = <0x30080000 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_PDM_IPG>, + <&clk IMX8MM_CLK_PDM_ROOT>, + <&clk IMX8MM_AUDIO_PLL1_OUT>, + <&clk IMX8MM_AUDIO_PLL2_OUT>, + <&clk IMX8MM_CLK_EXT3>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "pll11k", "clkext3"; + dmas = <&sdma2 24 25 0x80000000>; + dma-names = "rx"; + status = "disabled"; + }; + + spdif1: spdif@30090000 { + compatible = "fsl,imx35-spdif"; + reg = <0x30090000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */ + <&clk IMX8MM_CLK_24M>, /* rxtx0 */ + <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MM_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + gpio1: gpio@30200000 { compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio"; reg = <0x30200000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts index 8311b95dee49..b4225cfcb6d9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts @@ -14,6 +14,22 @@ compatible = "fsl,imx8mn-evk", "fsl,imx8mn"; }; +&A53_0 { + cpu-supply = <&buck2>; +}; + +&A53_1 { + cpu-supply = <&buck2>; +}; + +&A53_2 { + cpu-supply = <&buck2>; +}; + +&A53_3 { + cpu-supply = <&buck2>; +}; + &i2c1 { pmic: pmic@25 { compatible = "nxp,pca9450b"; @@ -110,19 +126,3 @@ }; }; }; - -&A53_0 { - /delete-property/operating-points-v2; -}; - -&A53_1 { - /delete-property/operating-points-v2; -}; - -&A53_2 { - /delete-property/operating-points-v2; -}; - -&A53_3 { - /delete-property/operating-points-v2; -}; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi index 4aa0dbd578df..76d042a4cf09 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi @@ -38,6 +38,14 @@ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>; enable-active-high; }; + + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ir>; + linux,autosuspend-period = <125>; + }; }; &fec1 { @@ -202,6 +210,12 @@ >; }; + pinctrl_ir: irgrp { + fsl,pins = < + MX8MN_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x4f + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX8MN_IOMUXC_I2C1_SCL_I2C1_SCL 0x400001c3 @@ -340,7 +354,7 @@ pinctrl_wdog: wdoggrp { fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi index 7f356edf9f91..b16c7caf34c1 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi @@ -542,7 +542,7 @@ pinctrl_wdog: wdoggrp { fsl,pins = < - MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0xc6 + MX8MN_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B 0x166 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi index 16c7202885d7..ee1790230490 100644 --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi @@ -186,6 +186,13 @@ clock-output-names = "clk_ext4"; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -225,10 +232,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <8000000>; arm,no-tick-in-suspend; }; @@ -246,6 +253,149 @@ #size-cells = <1>; ranges; + spba: bus@30000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x30000000 0x100000>; + ranges; + + sai2: sai@30020000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30020000 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SAI2_IPG>, + <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_SAI2_ROOT>, + <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai3: sai@30030000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30030000 0x10000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SAI3_IPG>, + <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_SAI3_ROOT>, + <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai5: sai@30050000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30050000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SAI5_IPG>, + <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_SAI5_ROOT>, + <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>; + dma-names = "rx", "tx"; + fsl,shared-interrupt; + fsl,dataline = <0 0xf 0xf>; + status = "disabled"; + }; + + sai6: sai@30060000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x30060000 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SAI6_IPG>, + <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_SAI6_ROOT>, + <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + micfil: audio-controller@30080000 { + compatible = "fsl,imx8mm-micfil"; + reg = <0x30080000 0x10000>; + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_PDM_IPG>, + <&clk IMX8MN_CLK_PDM_ROOT>, + <&clk IMX8MN_AUDIO_PLL1_OUT>, + <&clk IMX8MN_AUDIO_PLL2_OUT>, + <&clk IMX8MN_CLK_EXT3>; + clock-names = "ipg_clk", "ipg_clk_app", + "pll8k", "pll11k", "clkext3"; + dmas = <&sdma2 24 25 0x80000000>; + dma-names = "rx"; + status = "disabled"; + }; + + spdif1: spdif@30090000 { + compatible = "fsl,imx35-spdif"; + reg = <0x30090000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_AUDIO_AHB>, /* core */ + <&clk IMX8MN_CLK_24M>, /* rxtx0 */ + <&clk IMX8MN_CLK_SPDIF1>, /* rxtx1 */ + <&clk IMX8MN_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MN_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MN_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MN_CLK_AUDIO_AHB>, /* rxtx5 */ + <&clk IMX8MN_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MN_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MN_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + sai7: sai@300b0000 { + compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai"; + reg = <0x300b0000 0x10000>; + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_SAI7_IPG>, + <&clk IMX8MN_CLK_DUMMY>, + <&clk IMX8MN_CLK_SAI7_ROOT>, + <&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_CLK_DUMMY>; + clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3"; + dmas = <&sdma2 12 2 0>, <&sdma2 13 2 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + easrc: easrc@300c0000 { + compatible = "fsl,imx8mn-easrc"; + reg = <0x300c0000 0x10000>; + interrupts = <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MN_CLK_ASRC_ROOT>; + clock-names = "mem"; + dmas = <&sdma2 16 23 0> , <&sdma2 17 23 0>, + <&sdma2 18 23 0> , <&sdma2 19 23 0>, + <&sdma2 20 23 0> , <&sdma2 21 23 0>, + <&sdma2 22 23 0> , <&sdma2 23 23 0>; + dma-names = "ctx0_rx", "ctx0_tx", + "ctx1_rx", "ctx1_tx", + "ctx2_rx", "ctx2_tx", + "ctx3_rx", "ctx3_tx"; + firmware-name = "imx/easrc/easrc-imx8mn.bin"; + fsl,asrc-rate = <8000>; + fsl,asrc-format = <2>; + status = "disabled"; + }; + }; + gpio1: gpio@30200000 { compatible = "fsl,imx8mn-gpio", "fsl,imx35-gpio"; reg = <0x30200000 0x10000>; diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts index ad66f1286d95..b10dce8767a4 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts @@ -33,6 +33,28 @@ <0x1 0x00000000 0 0xc0000000>; }; + reg_can1_stby: regulator-can1-stby { + compatible = "regulator-fixed"; + regulator-name = "can1-stby"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio5 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can2_stby: regulator-can2-stby { + compatible = "regulator-fixed"; + regulator-name = "can2-stby"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + reg_usdhc2_vmmc: regulator-usdhc2 { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -45,6 +67,20 @@ }; }; +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can1_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can2_stby>; + status = "disabled";/* can2 pin conflict with pdm */ +}; + &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fec>; @@ -144,6 +180,32 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_RX__CAN1_RX 0x154 + MX8MP_IOMUXC_SPDIF_TX__CAN1_TX 0x154 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 + MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 + >; + }; + + pinctrl_flexcan1_reg: flexcan1reggrp { + fsl,pins = < + MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x154 /* CAN1_STBY */ + >; + }; + + pinctrl_flexcan2_reg: flexcan2reggrp { + fsl,pins = < + MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27 0x154 /* CAN2_STBY */ + >; + }; + pinctrl_gpio_led: gpioledgrp { fsl,pins = < MX8MP_IOMUXC_NAND_READY_B__GPIO3_IO16 0x19 @@ -262,7 +324,7 @@ pinctrl_wdog: wdoggrp { fsl,pins = < - MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0xc6 + MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 >; }; }; diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 6038f66aefc1..ecccfbb4f5ad 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -133,6 +133,13 @@ clock-output-names = "clk_ext4"; }; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>; + }; + psci { compatible = "arm,psci-1.0"; method = "smc"; @@ -202,10 +209,10 @@ timer { compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; clock-frequency = <8000000>; arm,no-tick-in-suspend; }; @@ -545,6 +552,36 @@ status = "disabled"; }; + flexcan1: can@308c0000 { + compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan"; + reg = <0x308c0000 0x10000>; + interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_IPG_ROOT>, + <&clk IMX8MP_CLK_CAN1_ROOT>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX8MP_CLK_CAN1>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + fsl,stop-mode = <&gpr 0x10 4>; + status = "disabled"; + }; + + flexcan2: can@308d0000 { + compatible = "fsl,imx8mp-flexcan", "fsl,imx6q-flexcan"; + reg = <0x308d0000 0x10000>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_IPG_ROOT>, + <&clk IMX8MP_CLK_CAN2_ROOT>; + clock-names = "ipg", "per"; + assigned-clocks = <&clk IMX8MP_CLK_CAN2>; + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_40M>; + assigned-clock-rates = <40000000>; + fsl,clk-source = /bits/ 8 <0>; + fsl,stop-mode = <&gpr 0x10 5>; + status = "disabled"; + }; + crypto: crypto@30900000 { compatible = "fsl,sec-v4.0"; #address-cells = <1>; diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts index 2418cca00bc5..85b045253a0e 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts @@ -57,6 +57,7 @@ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ir>; + linux,autosuspend-period = <125>; }; wm8524: audio-codec { @@ -87,6 +88,21 @@ clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>; }; }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif1>; + spdif-out; + spdif-in; + }; + + sound-hdmi-arc { + compatible = "fsl,imx-audio-spdif"; + model = "imx-hdmi-arc"; + spdif-controller = <&spdif2>; + spdif-in; + }; }; &A53_0 { @@ -336,6 +352,22 @@ status = "okay"; }; +&spdif1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif1>; + assigned-clocks = <&clk IMX8MQ_CLK_SPDIF1>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + +&spdif2 { + assigned-clocks = <&clk IMX8MQ_CLK_SPDIF2>; + assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1_OUT>; + assigned-clock-rates = <24576000>; + status = "okay"; +}; + &uart1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; @@ -467,6 +499,13 @@ >; }; + pinctrl_spdif1: spdif1grp { + fsl,pins = < + MX8MQ_IOMUXC_SPDIF_TX_SPDIF1_OUT 0xd6 + MX8MQ_IOMUXC_SPDIF_RX_SPDIF1_IN 0xd6 + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49 diff --git a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi index e3c6d1272198..64fc546b110f 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq-librem5.dtsi @@ -250,7 +250,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pmic_5v>; - pmic-5v { + pmic-5v-hog { gpio-hog; gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>; input; diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi index 5e0e7d0f1bc4..a841a023e8e0 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi @@ -606,11 +606,25 @@ "clk_ext3", "clk_ext4"; assigned-clocks = <&clk IMX8MQ_CLK_A53_SRC>, <&clk IMX8MQ_CLK_A53_CORE>, - <&clk IMX8MQ_CLK_NOC>; + <&clk IMX8MQ_CLK_NOC>, + <&clk IMX8MQ_CLK_AUDIO_AHB>, + <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, + <&clk IMX8MQ_AUDIO_PLL2_BYPASS>, + <&clk IMX8MQ_AUDIO_PLL1>, + <&clk IMX8MQ_AUDIO_PLL2>; assigned-clock-rates = <0>, <0>, - <800000000>; + <800000000>, + <0>, + <0>, + <0>, + <786432000>, + <722534400>; assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, - <&clk IMX8MQ_ARM_PLL_OUT>; + <&clk IMX8MQ_ARM_PLL_OUT>, + <0>, + <&clk IMX8MQ_SYS2_PLL_500M>, + <&clk IMX8MQ_AUDIO_PLL1>, + <&clk IMX8MQ_AUDIO_PLL2>; }; src: reset-controller@30390000 { @@ -779,6 +793,30 @@ ranges = <0x30800000 0x30800000 0x400000>, <0x08000000 0x08000000 0x10000000>; + spdif1: spdif@30810000 { + compatible = "fsl,imx35-spdif"; + reg = <0x30810000 0x10000>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */ + <&clk IMX8MQ_CLK_25M>, /* rxtx0 */ + <&clk IMX8MQ_CLK_SPDIF1>, /* rxtx1 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MQ_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma1 8 18 0>, <&sdma1 9 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + ecspi1: spi@30820000 { #address-cells = <1>; #size-cells = <0>; @@ -848,6 +886,30 @@ status = "disabled"; }; + spdif2: spdif@308a0000 { + compatible = "fsl,imx35-spdif"; + reg = <0x308a0000 0x10000>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MQ_CLK_IPG_ROOT>, /* core */ + <&clk IMX8MQ_CLK_25M>, /* rxtx0 */ + <&clk IMX8MQ_CLK_SPDIF2>, /* rxtx1 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx2 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx3 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx4 */ + <&clk IMX8MQ_CLK_IPG_ROOT>, /* rxtx5 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx6 */ + <&clk IMX8MQ_CLK_DUMMY>, /* rxtx7 */ + <&clk IMX8MQ_CLK_DUMMY>; /* spba */ + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "spba"; + dmas = <&sdma1 16 18 0>, <&sdma1 17 18 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + sai2: sai@308b0000 { #sound-dai-cells = <0>; compatible = "fsl,imx8mq-sai"; |