arm64: dts: marvell: replace cpm by cp0, cps by cp1

In preparation for the introduction of more than 2 CPs in upcoming
SoCs, it makes sense to move away from the "CP master" (cpm) and "CP
slave" (cps) naming, and use instead cp0/cp1.

This commit is the result of:

 sed 's%cpm%cp0g%' arch/arm64/boot/dts/marvell/*
 sed 's%cps%cp1g%' arch/arm64/boot/dts/marvell/*

So it is a purely mechaninal change.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Suggested-by: Hanna Hawa <hannah@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

1 files changed, 40 insertions, 40 deletions

diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
index b1f6cccc5081..13e3209d554a 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts
@@ -61,46 +61,46 @@
 		reg = <0x0 0x0 0x0 0x80000000>;
 	};
 
-	cpm_reg_usb3_0_vbus: cpm-usb3-0-vbus {
+	cp0_reg_usb3_0_vbus: cp0-usb3-0-vbus {
 		compatible = "regulator-fixed";
-		regulator-name = "cpm-usb3h0-vbus";
+		regulator-name = "cp0-usb3h0-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
 		gpio = <&expander0 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	cpm_reg_usb3_1_vbus: cpm-usb3-1-vbus {
+	cp0_reg_usb3_1_vbus: cp0-usb3-1-vbus {
 		compatible = "regulator-fixed";
-		regulator-name = "cpm-usb3h1-vbus";
+		regulator-name = "cp0-usb3h1-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
 		gpio = <&expander0 1 GPIO_ACTIVE_HIGH>;
 	};
 
-	cpm_usb3_0_phy: cpm-usb3-0-phy {
+	cp0_usb3_0_phy: cp0-usb3-0-phy {
 		compatible = "usb-nop-xceiv";
-		vcc-supply = <&cpm_reg_usb3_0_vbus>;
+		vcc-supply = <&cp0_reg_usb3_0_vbus>;
 	};
 
-	cpm_usb3_1_phy: cpm-usb3-1-phy {
+	cp0_usb3_1_phy: cp0-usb3-1-phy {
 		compatible = "usb-nop-xceiv";
-		vcc-supply = <&cpm_reg_usb3_1_vbus>;
+		vcc-supply = <&cp0_reg_usb3_1_vbus>;
 	};
 
-	cps_reg_usb3_0_vbus: cps-usb3-0-vbus {
+	cp1_reg_usb3_0_vbus: cp1-usb3-0-vbus {
 		compatible = "regulator-fixed";
-		regulator-name = "cps-usb3h0-vbus";
+		regulator-name = "cp1-usb3h0-vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 		enable-active-high;
 		gpio = <&expander1 0 GPIO_ACTIVE_HIGH>;
 	};
 
-	cps_usb3_0_phy: cps-usb3-0-phy {
+	cp1_usb3_0_phy: cp1-usb3-0-phy {
 		compatible = "usb-nop-xceiv";
-		vcc-supply = <&cps_reg_usb3_0_vbus>;
+		vcc-supply = <&cp1_reg_usb3_0_vbus>;
 	};
 };
 
@@ -144,16 +144,16 @@
 };
 
 /* CON6 on CP0 expansion */
-&cpm_pcie0 {
+&cp0_pcie0 {
 	status = "okay";
 };
 
 /* CON5 on CP0 expansion */
-&cpm_pcie2 {
+&cp0_pcie2 {
 	status = "okay";
 };
 
-&cpm_i2c0 {
+&cp0_i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
 
@@ -178,23 +178,23 @@
 };
 
 /* CON4 on CP0 expansion */
-&cpm_sata0 {
+&cp0_sata0 {
 	status = "okay";
 };
 
 /* CON9 on CP0 expansion */
-&cpm_usb3_0 {
-	usb-phy = <&cpm_usb3_0_phy>;
+&cp0_usb3_0 {
+	usb-phy = <&cp0_usb3_0_phy>;
 	status = "okay";
 };
 
 /* CON10 on CP0 expansion */
-&cpm_usb3_1 {
-	usb-phy = <&cpm_usb3_1_phy>;
+&cp0_usb3_1 {
+	usb-phy = <&cp0_usb3_1_phy>;
 	status = "okay";
 };
 
-&cpm_mdio {
+&cp0_mdio {
 	status = "okay";
 
 	phy1: ethernet-phy@1 {
@@ -202,42 +202,42 @@
 	};
 };
 
-&cpm_ethernet {
+&cp0_ethernet {
 	status = "okay";
 };
 
-&cpm_eth0 {
+&cp0_eth0 {
 	status = "okay";
 	phy-mode = "10gbase-kr";
 };
 
-&cpm_eth2 {
+&cp0_eth2 {
 	status = "okay";
 	phy = <&phy1>;
 	phy-mode = "rgmii-id";
 };
 
 /* CON6 on CP1 expansion */
-&cps_pcie0 {
+&cp1_pcie0 {
 	status = "okay";
 };
 
 /* CON7 on CP1 expansion */
-&cps_pcie1 {
+&cp1_pcie1 {
 	status = "okay";
 };
 
 /* CON5 on CP1 expansion */
-&cps_pcie2 {
+&cp1_pcie2 {
 	status = "okay";
 };
 
-&cps_i2c0 {
+&cp1_i2c0 {
 	status = "okay";
 	clock-frequency = <100000>;
 };
 
-&cps_spi1 {
+&cp1_spi1 {
 	status = "okay";
 
 	spi-flash@0 {
@@ -272,14 +272,14 @@
  * Proper NAND usage will require DPR-76 to be in position 1-2, which disables
  * MDIO signal of CP1.
  */
-&cps_nand {
+&cp1_nand {
 	num-cs = <1>;
 	pinctrl-0 = <&nand_pins>, <&nand_rb>;
 	pinctrl-names = "default";
 	nand-ecc-strength = <4>;
 	nand-ecc-step-size = <512>;
 	marvell,nand-enable-arbiter;
-	marvell,system-controller = <&cps_syscon0>;
+	marvell,system-controller = <&cp1_syscon0>;
 	nand-on-flash-bbt;
 
 	partition@0 {
@@ -297,22 +297,22 @@
 };
 
 /* CON4 on CP1 expansion */
-&cps_sata0 {
+&cp1_sata0 {
 	status = "okay";
 };
 
 /* CON9 on CP1 expansion */
-&cps_usb3_0 {
-	usb-phy = <&cps_usb3_0_phy>;
+&cp1_usb3_0 {
+	usb-phy = <&cp1_usb3_0_phy>;
 	status = "okay";
 };
 
 /* CON10 on CP1 expansion */
-&cps_usb3_1 {
+&cp1_usb3_1 {
 	status = "okay";
 };
 
-&cps_mdio {
+&cp1_mdio {
 	status = "okay";
 
 	phy0: ethernet-phy@0 {
@@ -320,16 +320,16 @@
 	};
 };
 
-&cps_ethernet {
+&cp1_ethernet {
 	status = "okay";
 };
 
-&cps_eth0 {
+&cp1_eth0 {
 	status = "okay";
 	phy-mode = "10gbase-kr";
 };
 
-&cps_eth1 {
+&cp1_eth1 {
 	status = "okay";
 	phy = <&phy0>;
 	phy-mode = "rgmii-id";
@@ -341,7 +341,7 @@
 	non-removable;
 };
 
-&cpm_sdhci0 {
+&cp0_sdhci0 {
 	status = "okay";
 	bus-width = <8>;
 	non-removable;