arm64: dts: renesas: r8a774c0-cat874: Add support for AISTARVISION MIPI Adapter V2.1

This patch adds support for AISTARVISION MIPI Adapter V2.1 board connected
to G2E board. Common file aistarvision-mipi-adapter-2.1.dtsi is created
which have the camera endpoint nodes for imx219 and ov5645 so that this can
be re-used with other G2x platforms.

r8a774c0-ek874-mipi-2.1.dts file enables the required VIN/CSI nodes and by
default ties ov5645 camera endpoint to CSI2.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/1587397794-11237-1-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

1 files changed, 72 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
new file mode 100644
index 000000000000..f0829e905506
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a774c0-ek874-mipi-2.1.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the Silicon Linux RZ/G2E 96board platform (CAT874)
+ * connected with aistarvision-mipi-v2-adapter board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774c0-ek874.dts"
+#define MIPI_PARENT_I2C i2c3
+#include "aistarvision-mipi-adapter-2.1.dtsi"
+
+/ {
+	model = "Silicon Linux RZ/G2E evaluation kit EK874 (CAT874 + CAT875) with aistarvision-mipi-v2-adapter board";
+	compatible = "si-linux,cat875", "si-linux,cat874", "renesas,r8a774c0";
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&vin4 {
+	status = "okay";
+};
+
+&vin5 {
+	status = "okay";
+};
+
+&csi40 {
+	status = "okay";
+
+	ports {
+		port {
+			csi40_in: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&ov5645_ep>;
+			};
+		};
+	};
+};
+
+&ov5645 {
+	enable-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+	reset-gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
+
+	port {
+		ov5645_ep: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			remote-endpoint = <&csi40_in>;
+		};
+	};
+};
+
+&imx219 {
+	port {
+		imx219_ep: endpoint {
+			clock-lanes = <0>;
+			data-lanes = <1 2>;
+			link-frequencies = /bits/ 64 <456000000>;
+			/* uncomment remote-endpoint property to tie imx219 to
+			 * CSI2 also make sure remote-endpoint for ov5645 camera
+			 * is commented and remote endpoint phandle in csi40_in
+			 * is imx219_ep
+			 */
+			/* remote-endpoint = <&csi40_in>; */
+		};
+	};
+};