diff options
| author | Lev Popov <leo@nabam.net> | 2022-09-26 14:53:48 +0200 |
|---|---|---|
| committer | Heiko Stuebner <heiko@sntech.de> | 2022-10-17 14:16:30 +0200 |
| commit | 2dcd7e0c821fe9b663f7d3382b6d2faa8edf2129 (patch) | |
| tree | f47f415371efdce111401891800dfc784da7002c /arch/arm64 | |
| parent | arm64: dts: rockchip: add enable-strobe-pulldown to emmc phy on nanopi4 (diff) | |
| download | linux-2dcd7e0c821fe9b663f7d3382b6d2faa8edf2129.tar.xz linux-2dcd7e0c821fe9b663f7d3382b6d2faa8edf2129.zip | |
arm64: dts: rockchip: fix quartz64-a bluetooth configuration
For "Quartz64 Model A" add missing RTS line to the UART interface used by
bluetooth and swap bluetooth host-wakeup and device-wakeup gpio pins to
match the boards physical layout. This changes are necessary to make
bluetooth provided by the wireless module work.
Also set max-speed on the bluetooth device as it's not automatically
detected.
Fixes: b33a22a1e7c4 ("arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A")
Signed-off-by: Lev Popov <leo@nabam.net>
Link: https://lore.kernel.org/r/20220926125350.64783-1-leo@nabam.net
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Diffstat (limited to 'arch/arm64')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts | 7 |
1 files changed, 4 insertions, 3 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts index a05460b92415..25a8c781f4e7 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-a.dts @@ -740,7 +740,7 @@ &uart1 { pinctrl-names = "default"; - pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn>; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; status = "okay"; uart-has-rtscts; @@ -748,13 +748,14 @@ compatible = "brcm,bcm43438-bt"; clocks = <&rk817 1>; clock-names = "lpo"; - device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; - host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>; + device-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>; shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; vbat-supply = <&vcc_sys>; vddio-supply = <&vcca1v8_pmu>; + max-speed = <3000000>; }; }; |