summaryrefslogtreecommitdiffstats
path: root/arch/arm
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2012-05-14 15:24:45 +0200
committerArnd Bergmann <arnd@arndb.de>2012-05-14 15:28:19 +0200
commit304ea74770c892cf115e128b0e0dc6636148b010 (patch)
treeccf06fa8a8fa9321beaab730ac19160966033d52 /arch/arm
parentMerge branch 'mxs/dt/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2... (diff)
parentMerge branch 'imx/pinctrl' into imx/dt (diff)
downloadlinux-304ea74770c892cf115e128b0e0dc6636148b010.tar.xz
linux-304ea74770c892cf115e128b0e0dc6636148b010.zip
Merge branch 'imx/dt/for-3.5' of git://git.linaro.org/people/shawnguo/linux-2.6.git into next/dt2
Shawn Guo <shawn.guo@linaro.org> writes: I chose to base it on Sascha's imx-common-clk series than -rc, because otherwise it will keep patching clock file that has been removed by imx-common-clk series. It also depends on imx-pinctrl pull-request I just sent to be functional. Note: when imx-common-clk and imx-pinctrl get merged together, the following files will have conflicts. But the conflicts should not be so hard to resolve. [arnd: resolved those merge conflicts by pulling pinctrl branch] * imx/dt: (24 commits) ARM: dts: imx53-qsb: enable audio support ARM: dts: imx51-babbage: enable audio support ARM: imx: add audio codec clk lookup for imx53-qsb ARM: imx: add audmux pad setting for imx51-babbage ARM: imx: add more imx5 ssi clocks ARM: dts: imx53-qsb: Add Dialog DA9053 PMIC support ARM: dts: imx6q-sabrelite: add serial2 pinctrl support ARM: dts: imx6q-sabrelite: add sound device imx6q-sabrelite-sgtl5000 ARM: imx6q_sabrelite: clk_register_clkdev cko1 for sgtl5000 ARM: imx6q: add ssi1_ipg clk_lookup ARM: dts: imx6q-sabrelite: add audmux pinctrl support ARM: dts: imx6q-sabrelite: add i2c1 pinctrl support ARM: dts: imx6q-sabrelite: add audmux device ARM: dts: imx6q-sabrelite: add ssi device ARM: dts: imx6q-arm2: add pinctrl state for usdhc ARM: imx6: Add UART2 for low-level debug ARM: imx6q: register phy fixup only when CONFIG_PHYLIB is enabled ARM: imx6q: move imx6q_sabrelite specific code to a dedicated function ARM: dts: imx6q-sabrelite: Add SPI NOR support ARM: dts: Add basic support for imx6q-sabresd ... Pulls in imx/pinctrl and imx/clock as dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm')
-rw-r--r--arch/arm/Kconfig.debug8
-rw-r--r--arch/arm/boot/dts/imx27-phytec-phycore.dts8
-rw-r--r--arch/arm/boot/dts/imx27.dtsi14
-rw-r--r--arch/arm/boot/dts/imx51-babbage.dts40
-rw-r--r--arch/arm/boot/dts/imx51.dtsi41
-rw-r--r--arch/arm/boot/dts/imx53-ard.dts6
-rw-r--r--arch/arm/boot/dts/imx53-evk.dts8
-rw-r--r--arch/arm/boot/dts/imx53-qsb.dts121
-rw-r--r--arch/arm/boot/dts/imx53-smd.dts12
-rw-r--r--arch/arm/boot/dts/imx53.dtsi45
-rw-r--r--arch/arm/boot/dts/imx6q-arm2.dts13
-rw-r--r--arch/arm/boot/dts/imx6q-sabrelite.dts50
-rw-r--r--arch/arm/boot/dts/imx6q-sabresd.dts53
-rw-r--r--arch/arm/boot/dts/imx6q.dtsi171
-rw-r--r--arch/arm/mach-imx/Kconfig8
-rw-r--r--arch/arm/mach-imx/Makefile19
-rw-r--r--arch/arm/mach-imx/Makefile.boot3
-rw-r--r--arch/arm/mach-imx/clk-busy.c189
-rw-r--r--arch/arm/mach-imx/clk-gate2.c118
-rw-r--r--arch/arm/mach-imx/clk-imx1.c115
-rw-r--r--arch/arm/mach-imx/clk-imx21.c186
-rw-r--r--arch/arm/mach-imx/clk-imx25.c248
-rw-r--r--arch/arm/mach-imx/clk-imx27.c290
-rw-r--r--arch/arm/mach-imx/clk-imx31.c182
-rw-r--r--arch/arm/mach-imx/clk-imx35.c278
-rw-r--r--arch/arm/mach-imx/clk-imx51-imx53.c506
-rw-r--r--arch/arm/mach-imx/clk-imx6q.c444
-rw-r--r--arch/arm/mach-imx/clk-pfd.c147
-rw-r--r--arch/arm/mach-imx/clk-pllv1.c66
-rw-r--r--arch/arm/mach-imx/clk-pllv2.c249
-rw-r--r--arch/arm/mach-imx/clk-pllv3.c419
-rw-r--r--arch/arm/mach-imx/clk.h83
-rw-r--r--arch/arm/mach-imx/clock-imx1.c636
-rw-r--r--arch/arm/mach-imx/clock-imx21.c1239
-rw-r--r--arch/arm/mach-imx/clock-imx25.c346
-rw-r--r--arch/arm/mach-imx/clock-imx27.c785
-rw-r--r--arch/arm/mach-imx/clock-imx31.c630
-rw-r--r--arch/arm/mach-imx/clock-imx35.c536
-rw-r--r--arch/arm/mach-imx/clock-imx6q.c2111
-rw-r--r--arch/arm/mach-imx/clock-mx51-mx53.c1675
-rw-r--r--arch/arm/mach-imx/crmregs-imx3.h79
-rw-r--r--arch/arm/mach-imx/imx53-dt.c19
-rw-r--r--arch/arm/mach-imx/lluart.c6
-rw-r--r--arch/arm/mach-imx/mach-imx6q.c55
-rw-r--r--arch/arm/mach-imx/mach-mx51_babbage.c6
-rw-r--r--arch/arm/mach-imx/mm-imx3.c6
-rw-r--r--arch/arm/mach-imx/mm-imx5.c1
-rw-r--r--arch/arm/mach-imx/pm-imx3.c4
-rw-r--r--arch/arm/plat-mxc/clock.c11
-rw-r--r--arch/arm/plat-mxc/include/mach/clock.h4
-rw-r--r--arch/arm/plat-mxc/include/mach/debug-macro.S2
-rw-r--r--arch/arm/plat-mxc/include/mach/mx6q.h2
-rw-r--r--arch/arm/plat-mxc/time.c14
53 files changed, 4214 insertions, 8093 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 85348a09d655..0f876c20bb1e 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -180,6 +180,14 @@ choice
Say Y here if you want kernel low-level debugging support
on i.MX50 or i.MX53.
+ config DEBUG_IMX6Q_UART2
+ bool "i.MX6Q Debug UART2"
+ depends on SOC_IMX6Q
+ help
+ Say Y here if you want kernel low-level debugging support
+ on i.MX6Q UART2. This is correct for e.g. the SabreLite
+ board.
+
config DEBUG_IMX6Q_UART4
bool "i.MX6Q Debug UART4"
depends on SOC_IMX6Q
diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts
index a51a08fc2af9..2b0ff60247a4 100644
--- a/arch/arm/boot/dts/imx27-phytec-phycore.dts
+++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts
@@ -27,22 +27,22 @@
status = "okay";
};
- uart@1000a000 {
+ serial@1000a000 {
fsl,uart-has-rtscts;
status = "okay";
};
- uart@1000b000 {
+ serial@1000b000 {
fsl,uart-has-rtscts;
status = "okay";
};
- uart@1000c000 {
+ serial@1000c000 {
fsl,uart-has-rtscts;
status = "okay";
};
- fec@1002b000 {
+ ethernet@1002b000 {
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index bc5e7d5ddd54..2b1a166d41f9 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -59,28 +59,28 @@
status = "disabled";
};
- uart1: uart@1000a000 {
+ uart1: serial@1000a000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000a000 0x1000>;
interrupts = <20>;
status = "disabled";
};
- uart2: uart@1000b000 {
+ uart2: serial@1000b000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000b000 0x1000>;
interrupts = <19>;
status = "disabled";
};
- uart3: uart@1000c000 {
+ uart3: serial@1000c000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000c000 0x1000>;
interrupts = <18>;
status = "disabled";
};
- uart4: uart@1000d000 {
+ uart4: serial@1000d000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1000d000 0x1000>;
interrupts = <17>;
@@ -183,14 +183,14 @@
status = "disabled";
};
- uart5: uart@1001b000 {
+ uart5: serial@1001b000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001b000 0x1000>;
interrupts = <49>;
status = "disabled";
};
- uart6: uart@1001c000 {
+ uart6: serial@1001c000 {
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
reg = <0x1001c000 0x1000>;
interrupts = <48>;
@@ -206,7 +206,7 @@
status = "disabled";
};
- fec: fec@1002b000 {
+ fec: ethernet@1002b000 {
compatible = "fsl,imx27-fec";
reg = <0x1002b000 0x4000>;
interrupts = <50>;
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index 9949e6060dee..de065b5976e6 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -17,10 +17,6 @@
model = "Freescale i.MX51 Babbage Board";
compatible = "fsl,imx51-babbage", "fsl,imx51";
- chosen {
- bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
- };
-
memory {
reg = <0x90000000 0x20000000>;
};
@@ -40,7 +36,7 @@
status = "okay";
};
- uart3: uart@7000c000 {
+ uart3: serial@7000c000 {
fsl,uart-has-rtscts;
status = "okay";
};
@@ -166,6 +162,11 @@
};
};
};
+
+ ssi2: ssi@70014000 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+ };
};
wdog@73f98000 { /* WDOG1 */
@@ -177,12 +178,12 @@
reg = <0x73fa8000 0x4000>;
};
- uart1: uart@73fbc000 {
+ uart1: serial@73fbc000 {
fsl,uart-has-rtscts;
status = "okay";
};
- uart2: uart@73fc0000 {
+ uart2: serial@73fc0000 {
status = "okay";
};
};
@@ -195,13 +196,20 @@
i2c@83fc4000 { /* I2C2 */
status = "okay";
- codec: sgtl5000@0a {
+ sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ clock-frequency = <26000000>;
+ VDDA-supply = <&vdig_reg>;
+ VDDIO-supply = <&vvideo_reg>;
};
};
- fec@83fec000 {
+ audmux@83fd0000 {
+ status = "okay";
+ };
+
+ ethernet@83fec000 {
phy-mode = "mii";
status = "okay";
};
@@ -218,4 +226,18 @@
gpio-key,wakeup;
};
};
+
+ sound {
+ compatible = "fsl,imx51-babbage-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx51-babbage-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <3>;
+ };
};
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 6663986fe1c8..bfa65abe8ef2 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -86,7 +86,7 @@
status = "disabled";
};
- uart3: uart@7000c000 {
+ uart3: serial@7000c000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x7000c000 0x4000>;
interrupts = <33>;
@@ -102,6 +102,15 @@
status = "disabled";
};
+ ssi2: ssi@70014000 {
+ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+ reg = <0x70014000 0x4000>;
+ interrupts = <30>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
esdhc@70020000 { /* ESDHC3 */
compatible = "fsl,imx51-esdhc";
reg = <0x70020000 0x4000>;
@@ -171,14 +180,14 @@
status = "disabled";
};
- uart1: uart@73fbc000 {
+ uart1: serial@73fbc000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fbc000 0x4000>;
interrupts = <31>;
status = "disabled";
};
- uart2: uart@73fc0000 {
+ uart2: serial@73fc0000 {
compatible = "fsl,imx51-uart", "fsl,imx21-uart";
reg = <0x73fc0000 0x4000>;
interrupts = <32>;
@@ -235,7 +244,31 @@
status = "disabled";
};
- fec@83fec000 {
+ ssi1: ssi@83fcc000 {
+ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+ reg = <0x83fcc000 0x4000>;
+ interrupts = <29>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ audmux@83fd0000 {
+ compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
+ reg = <0x83fd0000 0x4000>;
+ status = "disabled";
+ };
+
+ ssi3: ssi@83fe8000 {
+ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
+ reg = <0x83fe8000 0x4000>;
+ interrupts = <96>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ ethernet@83fec000 {
compatible = "fsl,imx51-fec", "fsl,imx27-fec";
reg = <0x83fec000 0x4000>;
interrupts = <87>;
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 2dccce46ed81..5b8eafcdbeec 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -17,10 +17,6 @@
model = "Freescale i.MX53 Automotive Reference Design Board";
compatible = "fsl,imx53-ard", "fsl,imx53";
- chosen {
- bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
- };
-
memory {
reg = <0x70000000 0x40000000>;
};
@@ -44,7 +40,7 @@
reg = <0x53fa8000 0x4000>;
};
- uart1: uart@53fbc000 {
+ uart1: serial@53fbc000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts
index 5bac4aa4800b..9c798034675e 100644
--- a/arch/arm/boot/dts/imx53-evk.dts
+++ b/arch/arm/boot/dts/imx53-evk.dts
@@ -17,10 +17,6 @@
model = "Freescale i.MX53 Evaluation Kit";
compatible = "fsl,imx53-evk", "fsl,imx53";
- chosen {
- bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
- };
-
memory {
reg = <0x70000000 0x80000000>;
};
@@ -75,7 +71,7 @@
reg = <0x53fa8000 0x4000>;
};
- uart1: uart@53fbc000 {
+ uart1: serial@53fbc000 {
status = "okay";
};
};
@@ -99,7 +95,7 @@
};
};
- fec@63fec000 {
+ ethernet@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts
index 5c57c8672c36..2d803a9a6949 100644
--- a/arch/arm/boot/dts/imx53-qsb.dts
+++ b/arch/arm/boot/dts/imx53-qsb.dts
@@ -17,10 +17,6 @@
model = "Freescale i.MX53 Quick Start Board";
compatible = "fsl,imx53-qsb", "fsl,imx53";
- chosen {
- bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
- };
-
memory {
reg = <0x70000000 0x40000000>;
};
@@ -33,6 +29,11 @@
status = "okay";
};
+ ssi2: ssi@50014000 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+ };
+
esdhc@50020000 { /* ESDHC3 */
cd-gpios = <&gpio3 11 0>;
wp-gpios = <&gpio3 12 0>;
@@ -49,7 +50,7 @@
reg = <0x53fa8000 0x4000>;
};
- uart1: uart@53fbc000 {
+ uart1: serial@53fbc000 {
status = "okay";
};
};
@@ -62,9 +63,11 @@
i2c@63fc4000 { /* I2C2 */
status = "okay";
- codec: sgtl5000@0a {
+ sgtl5000: codec@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
+ VDDA-supply = <&reg_3p2v>;
+ VDDIO-supply = <&reg_3p2v>;
};
};
@@ -77,12 +80,88 @@
};
pmic: dialog@48 {
- compatible = "dialog,da9053", "dialog,da9052";
+ compatible = "dlg,da9053-aa", "dlg,da9052";
reg = <0x48>;
+
+ regulators {
+ buck0 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2075000>;
+ };
+
+ buck1 {
+ regulator-min-microvolt = <500000>;
+ regulator-max-microvolt = <2075000>;
+ };
+
+ buck2 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ buck3 {
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ ldo4 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo5 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo6 {
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo7 {
+ regulator-min-microvolt = <1725000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ ldo10 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ ldo11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ };
+
+ ldo12 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3650000>;
+ };
+
+ ldo13 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3600000>;
+ };
+ };
};
};
- fec@63fec000 {
+ audmux@63fd0000 {
+ status = "okay";
+ };
+
+ ethernet@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
@@ -122,4 +201,30 @@
linux,default-trigger = "heartbeat";
};
};
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p2v: 3p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P2V";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+ };
+
+ sound {
+ compatible = "fsl,imx53-qsb-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx53-qsb-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <5>;
+ };
};
diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts
index c7ee86c2dfb5..a3529afc4d20 100644
--- a/arch/arm/boot/dts/imx53-smd.dts
+++ b/arch/arm/boot/dts/imx53-smd.dts
@@ -17,10 +17,6 @@
model = "Freescale i.MX53 Smart Mobile Reference Design Board";
compatible = "fsl,imx53-smd", "fsl,imx53";
- chosen {
- bootargs = "console=ttymxc0,115200 root=/dev/mmcblk0p3 rootwait";
- };
-
memory {
reg = <0x70000000 0x40000000>;
};
@@ -39,7 +35,7 @@
status = "okay";
};
- uart3: uart@5000c000 {
+ uart3: serial@5000c000 {
fsl,uart-has-rtscts;
status = "okay";
};
@@ -90,11 +86,11 @@
reg = <0x53fa8000 0x4000>;
};
- uart1: uart@53fbc000 {
+ uart1: serial@53fbc000 {
status = "okay";
};
- uart2: uart@53fc0000 {
+ uart2: serial@53fc0000 {
status = "okay";
};
};
@@ -142,7 +138,7 @@
};
};
- fec@63fec000 {
+ ethernet@63fec000 {
phy-mode = "rmii";
phy-reset-gpios = <&gpio7 6 0>;
status = "okay";
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 5dd91b942c91..e3e869470cd3 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -88,7 +88,7 @@
status = "disabled";
};
- uart3: uart@5000c000 {
+ uart3: serial@5000c000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
@@ -104,6 +104,15 @@
status = "disabled";
};
+ ssi2: ssi@50014000 {
+ compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+ reg = <0x50014000 0x4000>;
+ interrupts = <30>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
esdhc@50020000 { /* ESDHC3 */
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
@@ -173,14 +182,14 @@
status = "disabled";
};
- uart1: uart@53fbc000 {
+ uart1: serial@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
status = "disabled";
};
- uart2: uart@53fc0000 {
+ uart2: serial@53fc0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
@@ -226,7 +235,7 @@
status = "disabled";
};
- uart4: uart@53ff0000 {
+ uart4: serial@53ff0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
@@ -241,7 +250,7 @@
reg = <0x60000000 0x10000000>;
ranges;
- uart5: uart@63f90000 {
+ uart5: serial@63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
@@ -290,7 +299,31 @@
status = "disabled";
};
- fec@63fec000 {
+ ssi1: ssi@63fcc000 {
+ compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+ reg = <0x63fcc000 0x4000>;
+ interrupts = <29>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ audmux@63fd0000 {
+ compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
+ reg = <0x63fd0000 0x4000>;
+ status = "disabled";
+ };
+
+ ssi3: ssi@63fe8000 {
+ compatible = "fsl,imx53-ssi", "fsl,imx21-ssi";
+ reg = <0x63fe8000 0x4000>;
+ interrupts = <96>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */
+ status = "disabled";
+ };
+
+ ethernet@63fec000 {
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts
index ce1c8238c897..97893f5cab92 100644
--- a/arch/arm/boot/dts/imx6q-arm2.dts
+++ b/arch/arm/boot/dts/imx6q-arm2.dts
@@ -17,19 +17,14 @@
model = "Freescale i.MX6 Quad Armadillo2 Board";
compatible = "fsl,imx6q-arm2", "fsl,imx6q";
- chosen {
- bootargs = "console=ttymxc0,115200 root=/dev/mmcblk3p3 rootwait";
- };
-
memory {
reg = <0x10000000 0x80000000>;
};
soc {
aips-bus@02100000 { /* AIPS2 */
- enet@02188000 {
+ ethernet@02188000 {
phy-mode = "rgmii";
- local-mac-address = [00 04 9F 01 1B 61];
status = "okay";
};
@@ -37,16 +32,20 @@
cd-gpios = <&gpio6 11 0>;
wp-gpios = <&gpio6 14 0>;
vmmc-supply = <&reg_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_1>;
status = "okay";
};
usdhc@0219c000 { /* uSDHC4 */
fsl,card-wired;
vmmc-supply = <&reg_3p3v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4_1>;
status = "okay";
};
- uart4: uart@021f0000 {
+ uart4: serial@021f0000 {
status = "okay";
};
};
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index 4663a4e5a285..e0ec92973e7e 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -22,8 +22,30 @@
};
soc {
+ aips-bus@02000000 { /* AIPS1 */
+ spba-bus@02000000 {
+ ecspi@02008000 { /* eCSPI1 */
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio3 19 0>;
+ status = "okay";
+
+ flash: m25p80@0 {
+ compatible = "sst,sst25vf016b";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+ };
+
+ ssi1: ssi@02028000 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+ };
+ };
+
+ };
+
aips-bus@02100000 { /* AIPS2 */
- enet@02188000 {
+ ethernet@02188000 {
phy-mode = "rgmii";
phy-reset-gpios = <&gpio3 23 0>;
status = "okay";
@@ -43,13 +65,23 @@
status = "okay";
};
- uart2: uart@021e8000 {
+ audmux@021d8000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+ };
+
+ uart2: serial@021e8000 {
status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial2_1>;
};
i2c@021a0000 { /* I2C1 */
status = "okay";
clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_1>;
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
@@ -80,4 +112,18 @@
regulator-always-on;
};
};
+
+ sound {
+ compatible = "fsl,imx6q-sabrelite-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx6q-sabrelite-sgtl5000";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <1>;
+ mux-ext-port = <4>;
+ };
};
diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts
new file mode 100644
index 000000000000..07509a181178
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-sabresd.dts
@@ -0,0 +1,53 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+/include/ "imx6q.dtsi"
+
+/ {
+ model = "Freescale i.MX6Q SABRE Smart Device Board";
+ compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0x40000000>;
+ };
+
+ soc {
+
+ aips-bus@02000000 { /* AIPS1 */
+ spba-bus@02000000 {
+ uart1: serial@02020000 {
+ status = "okay";
+ };
+ };
+ };
+
+ aips-bus@02100000 { /* AIPS2 */
+ ethernet@02188000 {
+ phy-mode = "rgmii";
+ status = "okay";
+ };
+
+ usdhc@02194000 { /* uSDHC2 */
+ cd-gpios = <&gpio2 2 0>;
+ wp-gpios = <&gpio2 3 0>;
+ status = "okay";
+ };
+
+ usdhc@02198000 { /* uSDHC3 */
+ cd-gpios = <&gpio2 0 0>;
+ wp-gpios = <&gpio2 1 0>;
+ status = "okay";
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 4905f51a106f..8c90cbac945f 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -165,7 +165,7 @@
status = "disabled";
};
- uart1: uart@02020000 {
+ uart1: serial@02020000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x02020000 0x4000>;
interrupts = <0 26 0x04>;
@@ -177,19 +177,31 @@
interrupts = <0 51 0x04>;
};
- ssi@02028000 { /* SSI1 */
+ ssi1: ssi@02028000 {
+ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02028000 0x4000>;
interrupts = <0 46 0x04>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <38 37>;
+ status = "disabled";
};
- ssi@0202c000 { /* SSI2 */
+ ssi2: ssi@0202c000 {
+ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x0202c000 0x4000>;
interrupts = <0 47 0x04>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <42 41>;
+ status = "disabled";
};
- ssi@02030000 { /* SSI3 */
+ ssi3: ssi@02030000 {
+ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi";
reg = <0x02030000 0x4000>;
interrupts = <0 48 0x04>;
+ fsl,fifo-depth = <15>;
+ fsl,ssi-dma-events = <46 45>;
+ status = "disabled";
};
asrc@02034000 {
@@ -346,6 +358,90 @@
compatible = "fsl,imx6q-anatop";
reg = <0x020c8000 0x1000>;
interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>;
+
+ regulator-1p1@110 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd1p1";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1375000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x110>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <4>;
+ anatop-min-voltage = <800000>;
+ anatop-max-voltage = <1375000>;
+ };
+
+ regulator-3p0@120 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd3p0";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <3150000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x120>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2625000>;
+ anatop-max-voltage = <3400000>;
+ };
+
+ regulator-2p5@130 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vdd2p5";
+ regulator-min-microvolt = <2000000>;
+ regulator-max-microvolt = <2750000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x130>;
+ anatop-vol-bit-shift = <8>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <0>;
+ anatop-min-voltage = <2000000>;
+ anatop-max-voltage = <2750000>;
+ };
+
+ regulator-vddcore@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "cpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <0>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ regulator-vddpu@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddpu";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <9>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
+
+ regulator-vddsoc@140 {
+ compatible = "fsl,anatop-regulator";
+ regulator-name = "vddsoc";
+ regulator-min-microvolt = <725000>;
+ regulator-max-microvolt = <1450000>;
+ regulator-always-on;
+ anatop-reg-offset = <0x140>;
+ anatop-vol-bit-shift = <18>;
+ anatop-vol-bit-width = <5>;
+ anatop-min-bit-val = <1>;
+ anatop-min-voltage = <725000>;
+ anatop-max-voltage = <1450000>;
+ };
};
usbphy@020c9000 { /* USBPHY1 */
@@ -386,7 +482,62 @@
};
iomuxc@020e0000 {
+ compatible = "fsl,imx6q-iomuxc";
reg = <0x020e0000 0x4000>;
+
+ /* shared pinctrl settings */
+ audmux {
+ pinctrl_audmux_1: audmux-1 {
+ fsl,pins = <18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */
+ 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */
+ 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */
+ 3 0x80000000>; /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */
+ };
+ };
+
+ i2c1 {
+ pinctrl_i2c1_1: i2c1grp-1 {
+ fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */
+ 196 0x4001b8b1>; /* MX6Q_PAD_EIM_D28__I2C1_SDA */
+ };
+ };
+
+ serial2 {
+ pinctrl_serial2_1: serial2grp-1 {
+ fsl,pins = <183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */
+ 191 0x1b0b1>; /* MX6Q_PAD_EIM_D27__UART2_RXD */
+ };
+ };
+
+ usdhc3 {
+ pinctrl_usdhc3_1: usdhc3grp-1 {
+ fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */
+ 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */
+ 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */
+ 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */
+ 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */
+ 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */
+ 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */
+ 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */
+ 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */
+ 1241 0x17059>; /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */
+ };
+ };
+
+ usdhc4 {
+ pinctrl_usdhc4_1: usdhc4grp-1 {
+ fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */
+ 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */
+ 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */
+ 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */
+ 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */
+ 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */
+ 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */
+ 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */
+ 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */
+ 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */
+ };
+ };
};
dcic@020e4000 { /* DCIC1 */
@@ -422,7 +573,7 @@
reg = <0x0217c000 0x4000>;
};
- enet@02188000 {
+ ethernet@02188000 {
compatible = "fsl,imx6q-fec";
reg = <0x02188000 0x4000>;
interrupts = <0 118 0x04 0 119 0x04>;
@@ -527,7 +678,9 @@
};
audmux@021d8000 {
+ compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux";
reg = <0x021d8000 0x4000>;
+ status = "disabled";
};
mipi@021dc000 { /* MIPI-CSI */
@@ -543,28 +696,28 @@
interrupts = <0 18 0x04>;
};
- uart2: uart@021e8000 {
+ uart2: serial@021e8000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021e8000 0x4000>;
interrupts = <0 27 0x04>;
status = "disabled";
};
- uart3: uart@021ec000 {
+ uart3: serial@021ec000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021ec000 0x4000>;
interrupts = <0 28 0x04>;
status = "disabled";
};
- uart4: uart@021f0000 {
+ uart4: serial@021f0000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f0000 0x4000>;
interrupts = <0 29 0x04>;
status = "disabled";
};
- uart5: uart@021f4000 {
+ uart5: serial@021f4000 {
compatible = "fsl,imx6q-uart", "fsl,imx21-uart";
reg = <0x021f4000 0x4000>;
interrupts = <0 30 0x04>;
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index e0fc67cf659b..a57a8ecfd93f 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -34,6 +34,7 @@ config ARCH_MX53
config SOC_IMX1
bool
select ARCH_MX1
+ select COMMON_CLK
select CPU_ARM920T
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -42,12 +43,14 @@ config SOC_IMX21
bool
select MACH_MX21
select CPU_ARM926T
+ select COMMON_CLK
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
config SOC_IMX25
bool
select ARCH_MX25
+ select COMMON_CLK
select CPU_ARM926T
select ARCH_MXC_IOMUX_V3
select MXC_AVIC
@@ -56,6 +59,7 @@ config SOC_IMX27
bool
select MACH_MX27
select CPU_ARM926T
+ select COMMON_CLK
select IMX_HAVE_IOMUX_V1
select MXC_AVIC
@@ -64,12 +68,14 @@ config SOC_IMX31
select CPU_V6
select IMX_HAVE_PLATFORM_MXC_RNGA
select MXC_AVIC
+ select COMMON_CLK
select SMP_ON_UP if SMP
config SOC_IMX35
bool
select CPU_V6
select ARCH_MXC_IOMUX_V3
+ select COMMON_CLK
select HAVE_EPIT
select MXC_AVIC
select SMP_ON_UP if SMP
@@ -77,6 +83,7 @@ config SOC_IMX35
config SOC_IMX5
select CPU_V7
select MXC_TZIC
+ select COMMON_CLK
select ARCH_MXC_IOMUX_V3
select ARCH_HAS_CPUFREQ
select ARCH_MX5
@@ -836,6 +843,7 @@ config SOC_IMX6Q
bool "i.MX6 Quad support"
select ARM_CPU_SUSPEND if PM
select ARM_GIC
+ select COMMON_CLK
select CPU_V7
select HAVE_ARM_SCU
select HAVE_IMX_GPC
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index ab939c5046c3..629a3394feac 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -1,15 +1,18 @@
-obj-$(CONFIG_SOC_IMX1) += clock-imx1.o mm-imx1.o
-obj-$(CONFIG_SOC_IMX21) += clock-imx21.o mm-imx21.o
+obj-$(CONFIG_SOC_IMX1) += clk-imx1.o mm-imx1.o
+obj-$(CONFIG_SOC_IMX21) += clk-imx21.o mm-imx21.o
-obj-$(CONFIG_SOC_IMX25) += clock-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
+obj-$(CONFIG_SOC_IMX25) += clk-imx25.o mm-imx25.o ehci-imx25.o cpu-imx25.o
obj-$(CONFIG_SOC_IMX27) += cpu-imx27.o pm-imx27.o
-obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
+obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
-obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
+obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+
+obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
+ clk-pfd.o clk-busy.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -70,7 +73,7 @@ obj-$(CONFIG_CPU_V7) += head-v7.o
AFLAGS_head-v7.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 3851d8a27875..05541cf4a878 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -42,4 +42,5 @@ dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
imx53-qsb.dtb imx53-smd.dtb
dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
- imx6q-sabrelite.dtb
+ imx6q-sabrelite.dtb \
+ imx6q-sabresd.dtb \
diff --git a/arch/arm/mach-imx/clk-busy.c b/arch/arm/mach-imx/clk-busy.c
new file mode 100644
index 000000000000..1a7a8dd045a1
--- /dev/null
+++ b/arch/arm/mach-imx/clk-busy.c
@@ -0,0 +1,189 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+static int clk_busy_wait(void __iomem *reg, u8 shift)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
+
+ while (readl_relaxed(reg) & (1 << shift))
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+struct clk_busy_divider {
+ struct clk_divider div;
+ const struct clk_ops *div_ops;
+ void __iomem *reg;
+ u8 shift;
+};
+
+static inline struct clk_busy_divider *to_clk_busy_divider(struct clk_hw *hw)
+{
+ struct clk_divider *div = container_of(hw, struct clk_divider, hw);
+
+ return container_of(div, struct clk_busy_divider, div);
+}
+
+static unsigned long clk_busy_divider_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+ return busy->div_ops->recalc_rate(&busy->div.hw, parent_rate);
+}
+
+static long clk_busy_divider_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+
+ return busy->div_ops->round_rate(&busy->div.hw, rate, prate);
+}
+
+static int clk_busy_divider_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_busy_divider *busy = to_clk_busy_divider(hw);
+ int ret;
+
+ ret = busy->div_ops->set_rate(&busy->div.hw, rate, parent_rate);
+ if (!ret)
+ ret = clk_busy_wait(busy->reg, busy->shift);
+
+ return ret;
+}
+
+static struct clk_ops clk_busy_divider_ops = {
+ .recalc_rate = clk_busy_divider_recalc_rate,
+ .round_rate = clk_busy_divider_round_rate,
+ .set_rate = clk_busy_divider_set_rate,
+};
+
+struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width,
+ void __iomem *busy_reg, u8 busy_shift)
+{
+ struct clk_busy_divider *busy;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+ if (!busy)
+ return ERR_PTR(-ENOMEM);
+
+ busy->reg = busy_reg;
+ busy->shift = busy_shift;
+
+ busy->div.reg = reg;
+ busy->div.shift = shift;
+ busy->div.width = width;
+ busy->div.lock = &imx_ccm_lock;
+ busy->div_ops = &clk_divider_ops;
+
+ init.name = name;
+ init.ops = &clk_busy_divider_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ busy->div.hw.init = &init;
+
+ clk = clk_register(NULL, &busy->div.hw);
+ if (!clk)
+ kfree(busy);
+
+ return clk;
+}
+
+struct clk_busy_mux {
+ struct clk_mux mux;
+ const struct clk_ops *mux_ops;
+ void __iomem *reg;
+ u8 shift;
+};
+
+static inline struct clk_busy_mux *to_clk_busy_mux(struct clk_hw *hw)
+{
+ struct clk_mux *mux = container_of(hw, struct clk_mux, hw);
+
+ return container_of(mux, struct clk_busy_mux, mux);
+}
+
+static u8 clk_busy_mux_get_parent(struct clk_hw *hw)
+{
+ struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+
+ return busy->mux_ops->get_parent(&busy->mux.hw);
+}
+
+static int clk_busy_mux_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_busy_mux *busy = to_clk_busy_mux(hw);
+ int ret;
+
+ ret = busy->mux_ops->set_parent(&busy->mux.hw, index);
+ if (!ret)
+ ret = clk_busy_wait(busy->reg, busy->shift);
+
+ return ret;
+}
+
+struct clk_ops clk_busy_mux_ops = {
+ .get_parent = clk_busy_mux_get_parent,
+ .set_parent = clk_busy_mux_set_parent,
+};
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+ u8 width, void __iomem *busy_reg, u8 busy_shift,
+ const char **parent_names, int num_parents)
+{
+ struct clk_busy_mux *busy;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ busy = kzalloc(sizeof(*busy), GFP_KERNEL);
+ if (!busy)
+ return ERR_PTR(-ENOMEM);
+
+ busy->reg = busy_reg;
+ busy->shift = busy_shift;
+
+ busy->mux.reg = reg;
+ busy->mux.shift = shift;
+ busy->mux.width = width;
+ busy->mux.lock = &imx_ccm_lock;
+ busy->mux_ops = &clk_mux_ops;
+
+ init.name = name;
+ init.ops = &clk_busy_mux_ops;
+ init.flags = 0;
+ init.parent_names = parent_names;
+ init.num_parents = num_parents;
+
+ busy->mux.hw.init = &init;
+
+ clk = clk_register(NULL, &busy->mux.hw);
+ if (IS_ERR(clk))
+ kfree(busy);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-gate2.c b/arch/arm/mach-imx/clk-gate2.c
new file mode 100644
index 000000000000..3c1b8ff9a0a6
--- /dev/null
+++ b/arch/arm/mach-imx/clk-gate2.c
@@ -0,0 +1,118 @@
+/*
+ * Copyright (C) 2010-2011 Canonical Ltd <jeremy.kerr@canonical.com>
+ * Copyright (C) 2011-2012 Mike Turquette, Linaro Ltd <mturquette@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Gated clock implementation
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/string.h>
+
+/**
+ * DOC: basic gatable clock which can gate and ungate it's ouput
+ *
+ * Traits of this clock:
+ * prepare - clk_(un)prepare only ensures parent is (un)prepared
+ * enable - clk_enable and clk_disable are functional & control gating
+ * rate - inherits rate from parent. No clk_set_rate support
+ * parent - fixed parent. No clk_set_parent support
+ */
+
+#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+
+static int clk_gate2_enable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = to_clk_gate(hw);
+ u32 reg;
+ unsigned long flags = 0;
+
+ if (gate->lock)
+ spin_lock_irqsave(gate->lock, flags);
+
+ reg = readl(gate->reg);
+ reg |= 3 << gate->bit_idx;
+ writel(reg, gate->reg);
+
+ if (gate->lock)
+ spin_unlock_irqrestore(gate->lock, flags);
+
+ return 0;
+}
+
+static void clk_gate2_disable(struct clk_hw *hw)
+{
+ struct clk_gate *gate = to_clk_gate(hw);
+ u32 reg;
+ unsigned long flags = 0;
+
+ if (gate->lock)
+ spin_lock_irqsave(gate->lock, flags);
+
+ reg = readl(gate->reg);
+ reg &= ~(3 << gate->bit_idx);
+ writel(reg, gate->reg);
+
+ if (gate->lock)
+ spin_unlock_irqrestore(gate->lock, flags);
+}
+
+static int clk_gate2_is_enabled(struct clk_hw *hw)
+{
+ u32 reg;
+ struct clk_gate *gate = to_clk_gate(hw);
+
+ reg = readl(gate->reg);
+
+ if (((reg >> gate->bit_idx) & 3) == 3)
+ return 1;
+
+ return 0;
+}
+
+static struct clk_ops clk_gate2_ops = {
+ .enable = clk_gate2_enable,
+ .disable = clk_gate2_disable,
+ .is_enabled = clk_gate2_is_enabled,
+};
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate2_flags, spinlock_t *lock)
+{
+ struct clk_gate *gate;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ gate = kzalloc(sizeof(struct clk_gate), GFP_KERNEL);
+ if (!gate)
+ return ERR_PTR(-ENOMEM);
+
+ /* struct clk_gate assignments */
+ gate->reg = reg;
+ gate->bit_idx = bit_idx;
+ gate->flags = clk_gate2_flags;
+ gate->lock = lock;
+
+ init.name = name;
+ init.ops = &clk_gate2_ops;
+ init.flags = flags;
+ init.parent_names = parent_name ? &parent_name : NULL;
+ init.num_parents = parent_name ? 1 : 0;
+
+ gate->hw.init = &init;
+
+ clk = clk_register(dev, &gate->hw);
+ if (IS_ERR(clk))
+ kfree(clk);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c
new file mode 100644
index 000000000000..0f0beb580b73
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx1.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include "clk.h"
+
+/* CCM register addresses */
+#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
+
+#define CCM_CSCR IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
+#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
+#define CCM_PCDR IO_ADDR_CCM(0x20)
+
+/* SCM register addresses */
+#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
+
+#define SCM_GCCR IO_ADDR_SCM(0xc)
+
+static const char *prem_sel_clks[] = { "clk32_premult", "clk16m", };
+static const char *clko_sel_clks[] = { "per1", "hclk", "clk48m", "clk16m", "prem",
+ "fclk", };
+enum imx1_clks {
+ dummy, clk32, clk16m_ext, clk16m, clk32_premult, prem, mpll, spll, mcu,
+ fclk, hclk, clk48m, per1, per2, per3, clko, dma_gate, csi_gate,
+ mma_gate, usbd_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx1_clocks_init(unsigned long fref)
+{
+ int i;
+
+ clk[dummy] = imx_clk_fixed("dummy", 0);
+ clk[clk32] = imx_clk_fixed("clk32", fref);
+ clk[clk16m_ext] = imx_clk_fixed("clk16m_ext", 16000000);
+ clk[clk16m] = imx_clk_gate("clk16m", "clk16m_ext", CCM_CSCR, 17);
+ clk[clk32_premult] = imx_clk_fixed_factor("clk32_premult", "clk32", 512, 1);
+ clk[prem] = imx_clk_mux("prem", CCM_CSCR, 16, 1, prem_sel_clks,
+ ARRAY_SIZE(prem_sel_clks));
+ clk[mpll] = imx_clk_pllv1("mpll", "clk32_premult", CCM_MPCTL0);
+ clk[spll] = imx_clk_pllv1("spll", "prem", CCM_SPCTL0);
+ clk[mcu] = imx_clk_divider("mcu", "clk32_premult", CCM_CSCR, 15, 1);
+ clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 15, 1);
+ clk[hclk] = imx_clk_divider("hclk", "spll", CCM_CSCR, 10, 4);
+ clk[clk48m] = imx_clk_divider("clk48m", "spll", CCM_CSCR, 26, 3);
+ clk[per1] = imx_clk_divider("per1", "spll", CCM_PCDR, 0, 4);
+ clk[per2] = imx_clk_divider("per2", "spll", CCM_PCDR, 4, 4);
+ clk[per3] = imx_clk_divider("per3", "spll", CCM_PCDR, 16, 7);
+ clk[clko] = imx_clk_mux("clko", CCM_CSCR, 29, 3, clko_sel_clks,
+ ARRAY_SIZE(clko_sel_clks));
+ clk[dma_gate] = imx_clk_gate("dma_gate", "hclk", SCM_GCCR, 4);
+ clk[csi_gate] = imx_clk_gate("csi_gate", "hclk", SCM_GCCR, 2);
+ clk[mma_gate] = imx_clk_gate("mma_gate", "hclk", SCM_GCCR, 1);
+ clk[usbd_gate] = imx_clk_gate("usbd_gate", "clk48m", SCM_GCCR, 0);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("imx1 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ clk_register_clkdev(clk[dma_gate], "ahb", "imx-dma");
+ clk_register_clkdev(clk[csi_gate], NULL, "mx1-camera.0");
+ clk_register_clkdev(clk[mma_gate], "mma", NULL);
+ clk_register_clkdev(clk[usbd_gate], NULL, "imx_udc.0");
+ clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[hclk], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[per1], "per", "imx1-uart.0");
+ clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.0");
+ clk_register_clkdev(clk[per1], "per", "imx1-uart.1");
+ clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.1");
+ clk_register_clkdev(clk[per1], "per", "imx1-uart.2");
+ clk_register_clkdev(clk[hclk], "ipg", "imx1-uart.2");
+ clk_register_clkdev(clk[hclk], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[per2], "per", "imx1-cspi.0");
+ clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.0");
+ clk_register_clkdev(clk[per2], "per", "imx1-cspi.1");
+ clk_register_clkdev(clk[dummy], "ipg", "imx1-cspi.1");
+ clk_register_clkdev(clk[per2], NULL, "imx-mmc.0");
+ clk_register_clkdev(clk[per2], "per", "imx-fb.0");
+ clk_register_clkdev(clk[dummy], "ipg", "imx-fb.0");
+ clk_register_clkdev(clk[dummy], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[hclk], "mshc", NULL);
+ clk_register_clkdev(clk[per3], "ssi", NULL);
+ clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
+ clk_register_clkdev(clk[clko], "clko", NULL);
+
+ mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
+ MX1_TIM1_INT);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c
new file mode 100644
index 000000000000..4e4f384ee8dd
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx21.c
@@ -0,0 +1,186 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
+ * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include "clk.h"
+
+#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
+#define CCM_PCDR0 IO_ADDR_CCM(0x18)
+#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0 IO_ADDR_CCM(0x20)
+#define CCM_PCCR1 IO_ADDR_CCM(0x24)
+#define CCM_CCSR IO_ADDR_CCM(0x28)
+#define CCM_PMCTL IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
+
+static const char *mpll_sel_clks[] = { "fpm", "ckih", };
+static const char *spll_sel_clks[] = { "fpm", "ckih", };
+
+enum imx21_clks {
+ ckil, ckih, fpm, mpll_sel, spll_sel, mpll, spll, fclk, hclk, ipg, per1,
+ per2, per3, per4, uart1_ipg_gate, uart2_ipg_gate, uart3_ipg_gate,
+ uart4_ipg_gate, gpt1_ipg_gate, gpt2_ipg_gate, gpt3_ipg_gate,
+ pwm_ipg_gate, sdhc1_ipg_gate, sdhc2_ipg_gate, lcdc_ipg_gate,
+ lcdc_hclk_gate, cspi3_ipg_gate, cspi2_ipg_gate, cspi1_ipg_gate,
+ per4_gate, csi_hclk_gate, usb_div, usb_gate, usb_hclk_gate, ssi1_gate,
+ ssi2_gate, nfc_div, nfc_gate, dma_gate, dma_hclk_gate, brom_gate,
+ emma_gate, emma_hclk_gate, slcdc_gate, slcdc_hclk_gate, wdog_gate,
+ gpio_gate, i2c_gate, kpp_gate, owire_gate, rtc_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+/*
+ * must be called very early to get information about the
+ * available clock rate when the timer framework starts
+ */
+int __init mx21_clocks_init(unsigned long lref, unsigned long href)
+{
+ int i;
+
+ clk[ckil] = imx_clk_fixed("ckil", lref);
+ clk[ckih] = imx_clk_fixed("ckih", href);
+ clk[fpm] = imx_clk_fixed_factor("fpm", "ckil", 512, 1);
+ clk[mpll_sel] = imx_clk_mux("mpll_sel", CCM_CSCR, 16, 1, mpll_sel_clks,
+ ARRAY_SIZE(mpll_sel_clks));
+ clk[spll_sel] = imx_clk_mux("spll_sel", CCM_CSCR, 17, 1, spll_sel_clks,
+ ARRAY_SIZE(spll_sel_clks));
+ clk[mpll] = imx_clk_pllv1("mpll", "mpll_sel", CCM_MPCTL0);
+ clk[spll] = imx_clk_pllv1("spll", "spll_sel", CCM_SPCTL0);
+ clk[fclk] = imx_clk_divider("fclk", "mpll", CCM_CSCR, 29, 3);
+ clk[hclk] = imx_clk_divider("hclk", "fclk", CCM_CSCR, 10, 4);
+ clk[ipg] = imx_clk_divider("ipg", "hclk", CCM_CSCR, 9, 1);
+ clk[per1] = imx_clk_divider("per1", "mpll", CCM_PCDR1, 0, 6);
+ clk[per2] = imx_clk_divider("per2", "mpll", CCM_PCDR1, 8, 6);
+ clk[per3] = imx_clk_divider("per3", "mpll", CCM_PCDR1, 16, 6);
+ clk[per4] = imx_clk_divider("per4", "mpll", CCM_PCDR1, 24, 6);
+ clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR0, 0);
+ clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR0, 1);
+ clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR0, 2);
+ clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR0, 3);
+ clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR1, 25);
+ clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR1, 26);
+ clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR1, 27);
+ clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR1, 28);
+ clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 9);
+ clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 10);
+ clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 18);
+ clk[lcdc_hclk_gate] = imx_clk_gate("lcdc_hclk_gate", "hclk", CCM_PCCR0, 26);
+ clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR1, 23);
+ clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 5);
+ clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 4);
+ clk[per4_gate] = imx_clk_gate("per4_gate", "per4", CCM_PCCR0, 22);
+ clk[csi_hclk_gate] = imx_clk_gate("csi_hclk_gate", "hclk", CCM_PCCR0, 31);
+ clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 26, 3);
+ clk[usb_gate] = imx_clk_gate("usb_gate", "usb_div", CCM_PCCR0, 14);
+ clk[usb_hclk_gate] = imx_clk_gate("usb_hclk_gate", "hclk", CCM_PCCR0, 24);
+ clk[ssi1_gate] = imx_clk_gate("ssi1_gate", "ipg", CCM_PCCR0, 6);
+ clk[ssi2_gate] = imx_clk_gate("ssi2_gate", "ipg", CCM_PCCR0, 7);
+ clk[nfc_div] = imx_clk_divider("nfc_div", "ipg", CCM_PCDR0, 12, 4);
+ clk[nfc_gate] = imx_clk_gate("nfc_gate", "nfc_div", CCM_PCCR0, 19);
+ clk[dma_gate] = imx_clk_gate("dma_gate", "ipg", CCM_PCCR0, 13);
+ clk[dma_hclk_gate] = imx_clk_gate("dma_hclk_gate", "hclk", CCM_PCCR0, 30);
+ clk[brom_gate] = imx_clk_gate("brom_gate", "hclk", CCM_PCCR0, 28);
+ clk[emma_gate] = imx_clk_gate("emma_gate", "ipg", CCM_PCCR0, 15);
+ clk[emma_hclk_gate] = imx_clk_gate("emma_hclk_gate", "hclk", CCM_PCCR0, 27);
+ clk[slcdc_gate] = imx_clk_gate("slcdc_gate", "ipg", CCM_PCCR0, 25);
+ clk[slcdc_hclk_gate] = imx_clk_gate("slcdc_hclk_gate", "hclk", CCM_PCCR0, 21);
+ clk[wdog_gate] = imx_clk_gate("wdog_gate", "ipg", CCM_PCCR1, 24);
+ clk[gpio_gate] = imx_clk_gate("gpio_gate", "ipg", CCM_PCCR0, 11);
+ clk[i2c_gate] = imx_clk_gate("i2c_gate", "ipg", CCM_PCCR0, 12);
+ clk[kpp_gate] = imx_clk_gate("kpp_gate", "ipg", CCM_PCCR1, 30);
+ clk[owire_gate] = imx_clk_gate("owire_gate", "ipg", CCM_PCCR1, 31);
+ clk[rtc_gate] = imx_clk_gate("rtc_gate", "ipg", CCM_PCCR1, 29);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX21 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ clk_register_clkdev(clk[per1], "per1", NULL);
+ clk_register_clkdev(clk[per2], "per2", NULL);
+ clk_register_clkdev(clk[per3], "per3", NULL);
+ clk_register_clkdev(clk[per4], "per4", NULL);
+ clk_register_clkdev(clk[per1], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[per1], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[per1], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[per1], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[per1], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
+ clk_register_clkdev(clk[per1], "per", "imx-gpt.1");
+ clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
+ clk_register_clkdev(clk[per1], "per", "imx-gpt.2");
+ clk_register_clkdev(clk[pwm_ipg_gate], "pwm", "mxc_pwm.0");
+ clk_register_clkdev(clk[per2], "per", "imx21-cspi.0");
+ clk_register_clkdev(clk[cspi1_ipg_gate], "ipg", "imx21-cspi.0");
+ clk_register_clkdev(clk[per2], "per", "imx21-cspi.1");
+ clk_register_clkdev(clk[cspi2_ipg_gate], "ipg", "imx21-cspi.1");
+ clk_register_clkdev(clk[per2], "per", "imx21-cspi.2");
+ clk_register_clkdev(clk[cspi3_ipg_gate], "ipg", "imx21-cspi.2");
+ clk_register_clkdev(clk[per3], "per", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_hclk_gate], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[usb_gate], "per", "imx21-hcd.0");
+ clk_register_clkdev(clk[usb_hclk_gate], "ahb", "imx21-hcd.0");
+ clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[dma_hclk_gate], "ahb", "imx-dma");
+ clk_register_clkdev(clk[dma_gate], "ipg", "imx-dma");
+ clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[i2c_gate], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[kpp_gate], NULL, "mxc-keypad");
+ clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
+ clk_register_clkdev(clk[brom_gate], "brom", NULL);
+ clk_register_clkdev(clk[emma_gate], "emma", NULL);
+ clk_register_clkdev(clk[slcdc_gate], "slcdc", NULL);
+ clk_register_clkdev(clk[gpio_gate], "gpio", NULL);
+ clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
+ clk_register_clkdev(clk[csi_hclk_gate], "csi", NULL);
+ clk_register_clkdev(clk[ssi1_gate], "ssi1", NULL);
+ clk_register_clkdev(clk[ssi2_gate], "ssi2", NULL);
+ clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
+ clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
+
+ mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
+ MX21_INT_GPT1);
+ return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c
new file mode 100644
index 000000000000..d9833bb5fd61
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx25.c
@@ -0,0 +1,248 @@
+/*
+ * Copyright (C) 2009 by Sascha Hauer, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/mx25.h>
+#include "clk.h"
+
+#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
+
+#define CCM_MPCTL 0x00
+#define CCM_UPCTL 0x04
+#define CCM_CCTL 0x08
+#define CCM_CGCR0 0x0C
+#define CCM_CGCR1 0x10
+#define CCM_CGCR2 0x14
+#define CCM_PCDR0 0x18
+#define CCM_PCDR1 0x1C
+#define CCM_PCDR2 0x20
+#define CCM_PCDR3 0x24
+#define CCM_RCSR 0x28
+#define CCM_CRDR 0x2C
+#define CCM_DCVR0 0x30
+#define CCM_DCVR1 0x34
+#define CCM_DCVR2 0x38
+#define CCM_DCVR3 0x3c
+#define CCM_LTR0 0x40
+#define CCM_LTR1 0x44
+#define CCM_LTR2 0x48
+#define CCM_LTR3 0x4c
+#define CCM_MCR 0x64
+
+#define ccm(x) (CRM_BASE + (x))
+
+static const char *cpu_sel_clks[] = { "mpll", "mpll_cpu_3_4", };
+static const char *per_sel_clks[] = { "ahb", "upll", };
+
+enum mx25_clks {
+ dummy, osc, mpll, upll, mpll_cpu_3_4, cpu_sel, cpu, ahb, usb_div, ipg,
+ per0_sel, per1_sel, per2_sel, per3_sel, per4_sel, per5_sel, per6_sel,
+ per7_sel, per8_sel, per9_sel, per10_sel, per11_sel, per12_sel,
+ per13_sel, per14_sel, per15_sel, per0, per1, per2, per3, per4, per5,
+ per6, per7, per8, per9, per10, per11, per12, per13, per14, per15,
+ csi_ipg_per, esdhc1_ipg_per, esdhc2_ipg_per, gpt_ipg_per, i2c_ipg_per,
+ lcdc_ipg_per, nfc_ipg_per, ssi1_ipg_per, ssi2_ipg_per, uart_ipg_per,
+ csi_ahb, esdhc1_ahb, esdhc2_ahb, fec_ahb, lcdc_ahb, sdma_ahb,
+ usbotg_ahb, can1_ipg, can2_ipg, csi_ipg, cspi1_ipg, cspi2_ipg,
+ cspi3_ipg, dryice_ipg, esdhc1_ipg, esdhc2_ipg, fec_ipg, iim_ipg,
+ kpp_ipg, lcdc_ipg, pwm1_ipg, pwm2_ipg, pwm3_ipg, pwm4_ipg, sdma_ipg,
+ ssi1_ipg, ssi2_ipg, tsc_ipg, uart1_ipg, uart2_ipg, uart3_ipg,
+ uart4_ipg, uart5_ipg, wdt_ipg, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx25_clocks_init(void)
+{
+ int i;
+
+ clk[dummy] = imx_clk_fixed("dummy", 0);
+ clk[osc] = imx_clk_fixed("osc", 24000000);
+ clk[mpll] = imx_clk_pllv1("mpll", "osc", ccm(CCM_MPCTL));
+ clk[upll] = imx_clk_pllv1("upll", "osc", ccm(CCM_UPCTL));
+ clk[mpll_cpu_3_4] = imx_clk_fixed_factor("mpll_cpu_3_4", "mpll", 3, 4);
+ clk[cpu_sel] = imx_clk_mux("cpu_sel", ccm(CCM_CCTL), 14, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+ clk[cpu] = imx_clk_divider("cpu", "cpu_sel", ccm(CCM_CCTL), 30, 2);
+ clk[ahb] = imx_clk_divider("ahb", "cpu", ccm(CCM_CCTL), 28, 2);
+ clk[usb_div] = imx_clk_divider("usb_div", "upll", ccm(CCM_CCTL), 16, 6);
+ clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+ clk[per0_sel] = imx_clk_mux("per0_sel", ccm(CCM_MCR), 0, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per1_sel] = imx_clk_mux("per1_sel", ccm(CCM_MCR), 1, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per2_sel] = imx_clk_mux("per2_sel", ccm(CCM_MCR), 2, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per3_sel] = imx_clk_mux("per3_sel", ccm(CCM_MCR), 3, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per4_sel] = imx_clk_mux("per4_sel", ccm(CCM_MCR), 4, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per5_sel] = imx_clk_mux("per5_sel", ccm(CCM_MCR), 5, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per6_sel] = imx_clk_mux("per6_sel", ccm(CCM_MCR), 6, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per7_sel] = imx_clk_mux("per7_sel", ccm(CCM_MCR), 7, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per8_sel] = imx_clk_mux("per8_sel", ccm(CCM_MCR), 8, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per9_sel] = imx_clk_mux("per9_sel", ccm(CCM_MCR), 9, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per10_sel] = imx_clk_mux("per10_sel", ccm(CCM_MCR), 10, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per11_sel] = imx_clk_mux("per11_sel", ccm(CCM_MCR), 11, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per12_sel] = imx_clk_mux("per12_sel", ccm(CCM_MCR), 12, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per13_sel] = imx_clk_mux("per13_sel", ccm(CCM_MCR), 13, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per14_sel] = imx_clk_mux("per14_sel", ccm(CCM_MCR), 14, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per15_sel] = imx_clk_mux("per15_sel", ccm(CCM_MCR), 15, 1, per_sel_clks, ARRAY_SIZE(per_sel_clks));
+ clk[per0] = imx_clk_divider("per0", "per0_sel", ccm(CCM_PCDR0), 0, 6);
+ clk[per1] = imx_clk_divider("per1", "per1_sel", ccm(CCM_PCDR0), 8, 6);
+ clk[per2] = imx_clk_divider("per2", "per2_sel", ccm(CCM_PCDR0), 16, 6);
+ clk[per3] = imx_clk_divider("per3", "per3_sel", ccm(CCM_PCDR0), 24, 6);
+ clk[per4] = imx_clk_divider("per4", "per4_sel", ccm(CCM_PCDR1), 0, 6);
+ clk[per5] = imx_clk_divider("per5", "per5_sel", ccm(CCM_PCDR1), 8, 6);
+ clk[per6] = imx_clk_divider("per6", "per6_sel", ccm(CCM_PCDR1), 16, 6);
+ clk[per7] = imx_clk_divider("per7", "per7_sel", ccm(CCM_PCDR1), 24, 6);
+ clk[per8] = imx_clk_divider("per8", "per8_sel", ccm(CCM_PCDR2), 0, 6);
+ clk[per9] = imx_clk_divider("per9", "per9_sel", ccm(CCM_PCDR2), 8, 6);
+ clk[per10] = imx_clk_divider("per10", "per10_sel", ccm(CCM_PCDR2), 16, 6);
+ clk[per11] = imx_clk_divider("per11", "per11_sel", ccm(CCM_PCDR2), 24, 6);
+ clk[per12] = imx_clk_divider("per12", "per12_sel", ccm(CCM_PCDR3), 0, 6);
+ clk[per13] = imx_clk_divider("per13", "per13_sel", ccm(CCM_PCDR3), 8, 6);
+ clk[per14] = imx_clk_divider("per14", "per14_sel", ccm(CCM_PCDR3), 16, 6);
+ clk[per15] = imx_clk_divider("per15", "per15_sel", ccm(CCM_PCDR3), 24, 6);
+ clk[csi_ipg_per] = imx_clk_gate("csi_ipg_per", "per0", ccm(CCM_CGCR0), 0);
+ clk[esdhc1_ipg_per] = imx_clk_gate("esdhc1_ipg_per", "per3", ccm(CCM_CGCR0), 3);
+ clk[esdhc2_ipg_per] = imx_clk_gate("esdhc2_ipg_per", "per4", ccm(CCM_CGCR0), 4);
+ clk[gpt_ipg_per] = imx_clk_gate("gpt_ipg_per", "per5", ccm(CCM_CGCR0), 5);
+ clk[i2c_ipg_per] = imx_clk_gate("i2c_ipg_per", "per6", ccm(CCM_CGCR0), 6);
+ clk[lcdc_ipg_per] = imx_clk_gate("lcdc_ipg_per", "per8", ccm(CCM_CGCR0), 7);
+ clk[nfc_ipg_per] = imx_clk_gate("nfc_ipg_per", "ipg_per", ccm(CCM_CGCR0), 8);
+ clk[ssi1_ipg_per] = imx_clk_gate("ssi1_ipg_per", "per13", ccm(CCM_CGCR0), 13);
+ clk[ssi2_ipg_per] = imx_clk_gate("ssi2_ipg_per", "per14", ccm(CCM_CGCR0), 14);
+ clk[uart_ipg_per] = imx_clk_gate("uart_ipg_per", "per15", ccm(CCM_CGCR0), 15);
+ clk[csi_ahb] = imx_clk_gate("csi_ahb", "ahb", ccm(CCM_CGCR0), 18);
+ clk[esdhc1_ahb] = imx_clk_gate("esdhc1_ahb", "ahb", ccm(CCM_CGCR0), 21);
+ clk[esdhc2_ahb] = imx_clk_gate("esdhc2_ahb", "ahb", ccm(CCM_CGCR0), 22);
+ clk[fec_ahb] = imx_clk_gate("fec_ahb", "ahb", ccm(CCM_CGCR0), 23);
+ clk[lcdc_ahb] = imx_clk_gate("lcdc_ahb", "ahb", ccm(CCM_CGCR0), 24);
+ clk[sdma_ahb] = imx_clk_gate("sdma_ahb", "ahb", ccm(CCM_CGCR0), 26);
+ clk[usbotg_ahb] = imx_clk_gate("usbotg_ahb", "ahb", ccm(CCM_CGCR0), 28);
+ clk[can1_ipg] = imx_clk_gate("can1_ipg", "ipg", ccm(CCM_CGCR1), 2);
+ clk[can2_ipg] = imx_clk_gate("can2_ipg", "ipg", ccm(CCM_CGCR1), 3);
+ clk[csi_ipg] = imx_clk_gate("csi_ipg", "ipg", ccm(CCM_CGCR1), 4);
+ clk[cspi1_ipg] = imx_clk_gate("cspi1_ipg", "ipg", ccm(CCM_CGCR1), 5);
+ clk[cspi2_ipg] = imx_clk_gate("cspi2_ipg", "ipg", ccm(CCM_CGCR1), 6);
+ clk[cspi3_ipg] = imx_clk_gate("cspi3_ipg", "ipg", ccm(CCM_CGCR1), 7);
+ clk[dryice_ipg] = imx_clk_gate("dryice_ipg", "ipg", ccm(CCM_CGCR1), 8);
+ clk[esdhc1_ipg] = imx_clk_gate("esdhc1_ipg", "ipg", ccm(CCM_CGCR1), 13);
+ clk[esdhc2_ipg] = imx_clk_gate("esdhc2_ipg", "ipg", ccm(CCM_CGCR1), 14);
+ clk[fec_ipg] = imx_clk_gate("fec_ipg", "ipg", ccm(CCM_CGCR1), 15);
+ clk[iim_ipg] = imx_clk_gate("iim_ipg", "ipg", ccm(CCM_CGCR1), 26);
+ clk[kpp_ipg] = imx_clk_gate("kpp_ipg", "ipg", ccm(CCM_CGCR1), 28);
+ clk[lcdc_ipg] = imx_clk_gate("lcdc_ipg", "ipg", ccm(CCM_CGCR1), 29);
+ clk[pwm1_ipg] = imx_clk_gate("pwm1_ipg", "ipg", ccm(CCM_CGCR1), 31);
+ clk[pwm2_ipg] = imx_clk_gate("pwm2_ipg", "ipg", ccm(CCM_CGCR2), 0);
+ clk[pwm3_ipg] = imx_clk_gate("pwm3_ipg", "ipg", ccm(CCM_CGCR2), 1);
+ clk[pwm4_ipg] = imx_clk_gate("pwm4_ipg", "ipg", ccm(CCM_CGCR2), 2);
+ clk[sdma_ipg] = imx_clk_gate("sdma_ipg", "ipg", ccm(CCM_CGCR2), 6);
+ clk[ssi1_ipg] = imx_clk_gate("ssi1_ipg", "ipg", ccm(CCM_CGCR2), 11);
+ clk[ssi2_ipg] = imx_clk_gate("ssi2_ipg", "ipg", ccm(CCM_CGCR2), 12);
+ clk[tsc_ipg] = imx_clk_gate("tsc_ipg", "ipg", ccm(CCM_CGCR2), 13);
+ clk[uart1_ipg] = imx_clk_gate("uart1_ipg", "ipg", ccm(CCM_CGCR2), 14);
+ clk[uart2_ipg] = imx_clk_gate("uart2_ipg", "ipg", ccm(CCM_CGCR2), 15);
+ clk[uart3_ipg] = imx_clk_gate("uart3_ipg", "ipg", ccm(CCM_CGCR2), 16);
+ clk[uart4_ipg] = imx_clk_gate("uart4_ipg", "ipg", ccm(CCM_CGCR2), 17);
+ clk[uart5_ipg] = imx_clk_gate("uart5_ipg", "ipg", ccm(CCM_CGCR2), 18);
+ clk[wdt_ipg] = imx_clk_gate("wdt_ipg", "ipg", ccm(CCM_CGCR2), 19);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX25 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ /* i.mx25 has the i.mx21 type uart */
+ clk_register_clkdev(clk[uart1_ipg], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[uart2_ipg], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[uart3_ipg], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[uart4_ipg], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[uart5_ipg], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[uart_ipg_per], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[nfc_ipg_per], NULL, "mxc_nand.0");
+ /* i.mx25 has the i.mx35 type cspi */
+ clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");
+ clk_register_clkdev(clk[cspi2_ipg], NULL, "imx35-cspi.1");
+ clk_register_clkdev(clk[cspi3_ipg], NULL, "imx35-cspi.2");
+ clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.0");
+ clk_register_clkdev(clk[per10], "per", "mxc_pwm.0");
+ clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.1");
+ clk_register_clkdev(clk[per10], "per", "mxc_pwm.1");
+ clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.2");
+ clk_register_clkdev(clk[per10], "per", "mxc_pwm.2");
+ clk_register_clkdev(clk[pwm1_ipg], "ipg", "mxc_pwm.3");
+ clk_register_clkdev(clk[per10], "per", "mxc_pwm.3");
+ clk_register_clkdev(clk[kpp_ipg], NULL, "imx-keypad");
+ clk_register_clkdev(clk[tsc_ipg], NULL, "mx25-adc");
+ clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[i2c_ipg_per], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[fec_ipg], "ipg", "imx25-fec.0");
+ clk_register_clkdev(clk[fec_ahb], "ahb", "imx25-fec.0");
+ clk_register_clkdev(clk[dryice_ipg], NULL, "imxdi_rtc.0");
+ clk_register_clkdev(clk[lcdc_ipg_per], "per", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0");
+ clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1");
+ clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1");
+ clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0");
+ clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0");
+ clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0");
+ clk_register_clkdev(clk[esdhc2_ipg_per], "per", "sdhci-esdhc-imx25.1");
+ clk_register_clkdev(clk[esdhc2_ipg], "ipg", "sdhci-esdhc-imx25.1");
+ clk_register_clkdev(clk[esdhc2_ahb], "ahb", "sdhci-esdhc-imx25.1");
+ clk_register_clkdev(clk[csi_ipg_per], "per", "mx2-camera.0");
+ clk_register_clkdev(clk[csi_ipg], "ipg", "mx2-camera.0");
+ clk_register_clkdev(clk[csi_ahb], "ahb", "mx2-camera.0");
+ clk_register_clkdev(clk[dummy], "audmux", NULL);
+ clk_register_clkdev(clk[can1_ipg], NULL, "flexcan.0");
+ clk_register_clkdev(clk[can2_ipg], NULL, "flexcan.1");
+ /* i.mx25 has the i.mx35 type sdma */
+ clk_register_clkdev(clk[sdma_ipg], "ipg", "imx35-sdma");
+ clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
+ clk_register_clkdev(clk[iim_ipg], "iim", NULL);
+
+ mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+ return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
new file mode 100644
index 000000000000..50a7ebd8d1b2
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -0,0 +1,290 @@
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include "clk.h"
+
+#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
+
+/* Register offsets */
+#define CCM_CSCR IO_ADDR_CCM(0x0)
+#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
+#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
+#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
+#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
+#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
+#define CCM_PCDR0 IO_ADDR_CCM(0x18)
+#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
+#define CCM_PCCR0 IO_ADDR_CCM(0x20)
+#define CCM_PCCR1 IO_ADDR_CCM(0x24)
+#define CCM_CCSR IO_ADDR_CCM(0x28)
+#define CCM_PMCTL IO_ADDR_CCM(0x2c)
+#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
+#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
+
+#define CCM_CSCR_UPDATE_DIS (1 << 31)
+#define CCM_CSCR_SSI2 (1 << 23)
+#define CCM_CSCR_SSI1 (1 << 22)
+#define CCM_CSCR_VPU (1 << 21)
+#define CCM_CSCR_MSHC (1 << 20)
+#define CCM_CSCR_SPLLRES (1 << 19)
+#define CCM_CSCR_MPLLRES (1 << 18)
+#define CCM_CSCR_SP (1 << 17)
+#define CCM_CSCR_MCU (1 << 16)
+#define CCM_CSCR_OSC26MDIV (1 << 4)
+#define CCM_CSCR_OSC26M (1 << 3)
+#define CCM_CSCR_FPM (1 << 2)
+#define CCM_CSCR_SPEN (1 << 1)
+#define CCM_CSCR_MPEN (1 << 0)
+
+/* i.MX27 TO 2+ */
+#define CCM_CSCR_ARM_SRC (1 << 15)
+
+#define CCM_SPCTL1_LF (1 << 15)
+#define CCM_SPCTL1_BRMO (1 << 6)
+
+static const char *vpu_sel_clks[] = { "spll", "mpll_main2", };
+static const char *cpu_sel_clks[] = { "mpll_main2", "mpll", };
+static const char *clko_sel_clks[] = {
+ "ckil", "prem", "ckih", "ckih",
+ "ckih", "mpll", "spll", "cpu_div",
+ "ahb", "ipg", "per1_div", "per2_div",
+ "per3_div", "per4_div", "ssi1_div", "ssi2_div",
+ "nfc_div", "mshc_div", "vpu_div", "60m",
+ "32k", "usb_div", "dptc",
+};
+
+static const char *ssi_sel_clks[] = { "spll", "mpll", };
+
+enum mx27_clks {
+ dummy, ckih, ckil, mpll, spll, mpll_main2, ahb, ipg, nfc_div, per1_div,
+ per2_div, per3_div, per4_div, vpu_sel, vpu_div, usb_div, cpu_sel,
+ clko_sel, cpu_div, clko_div, ssi1_sel, ssi2_sel, ssi1_div, ssi2_div,
+ clko_en, ssi2_ipg_gate, ssi1_ipg_gate, slcdc_ipg_gate, sdhc3_ipg_gate,
+ sdhc2_ipg_gate, sdhc1_ipg_gate, scc_ipg_gate, sahara_ipg_gate,
+ rtc_ipg_gate, pwm_ipg_gate, owire_ipg_gate, lcdc_ipg_gate,
+ kpp_ipg_gate, iim_ipg_gate, i2c2_ipg_gate, i2c1_ipg_gate,
+ gpt6_ipg_gate, gpt5_ipg_gate, gpt4_ipg_gate, gpt3_ipg_gate,
+ gpt2_ipg_gate, gpt1_ipg_gate, gpio_ipg_gate, fec_ipg_gate,
+ emma_ipg_gate, dma_ipg_gate, cspi3_ipg_gate, cspi2_ipg_gate,
+ cspi1_ipg_gate, nfc_baud_gate, ssi2_baud_gate, ssi1_baud_gate,
+ vpu_baud_gate, per4_gate, per3_gate, per2_gate, per1_gate,
+ usb_ahb_gate, slcdc_ahb_gate, sahara_ahb_gate, lcdc_ahb_gate,
+ vpu_ahb_gate, fec_ahb_gate, emma_ahb_gate, emi_ahb_gate, dma_ahb_gate,
+ csi_ahb_gate, brom_ahb_gate, ata_ahb_gate, wdog_ipg_gate, usb_ipg_gate,
+ uart6_ipg_gate, uart5_ipg_gate, uart4_ipg_gate, uart3_ipg_gate,
+ uart2_ipg_gate, uart1_ipg_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx27_clocks_init(unsigned long fref)
+{
+ int i;
+
+ clk[dummy] = imx_clk_fixed("dummy", 0);
+ clk[ckih] = imx_clk_fixed("ckih", fref);
+ clk[ckil] = imx_clk_fixed("ckil", 32768);
+ clk[mpll] = imx_clk_pllv1("mpll", "ckih", CCM_MPCTL0);
+ clk[spll] = imx_clk_pllv1("spll", "ckih", CCM_SPCTL0);
+ clk[mpll_main2] = imx_clk_fixed_factor("mpll_main2", "mpll", 2, 3);
+
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
+ clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 8, 2);
+ clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+ } else {
+ clk[ahb] = imx_clk_divider("ahb", "mpll_main2", CCM_CSCR, 9, 4);
+ clk[ipg] = imx_clk_divider("ipg", "ahb", CCM_CSCR, 8, 1);
+ }
+
+ clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", CCM_PCDR0, 6, 4);
+ clk[per1_div] = imx_clk_divider("per1_div", "mpll_main2", CCM_PCDR1, 0, 6);
+ clk[per2_div] = imx_clk_divider("per2_div", "mpll_main2", CCM_PCDR1, 8, 6);
+ clk[per3_div] = imx_clk_divider("per3_div", "mpll_main2", CCM_PCDR1, 16, 6);
+ clk[per4_div] = imx_clk_divider("per4_div", "mpll_main2", CCM_PCDR1, 24, 6);
+ clk[vpu_sel] = imx_clk_mux("vpu_sel", CCM_CSCR, 21, 1, vpu_sel_clks, ARRAY_SIZE(vpu_sel_clks));
+ clk[vpu_div] = imx_clk_divider("vpu_div", "vpu_sel", CCM_PCDR0, 10, 3);
+ clk[usb_div] = imx_clk_divider("usb_div", "spll", CCM_CSCR, 28, 3);
+ clk[cpu_sel] = imx_clk_mux("cpu_sel", CCM_CSCR, 15, 1, cpu_sel_clks, ARRAY_SIZE(cpu_sel_clks));
+ clk[clko_sel] = imx_clk_mux("clko_sel", CCM_CCSR, 0, 5, clko_sel_clks, ARRAY_SIZE(clko_sel_clks));
+ if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
+ clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 12, 2);
+ else
+ clk[cpu_div] = imx_clk_divider("cpu_div", "cpu_sel", CCM_CSCR, 13, 3);
+ clk[clko_div] = imx_clk_divider("clko_div", "clko_sel", CCM_PCDR0, 22, 3);
+ clk[ssi1_sel] = imx_clk_mux("ssi1_sel", CCM_CSCR, 22, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[ssi2_sel] = imx_clk_mux("ssi2_sel", CCM_CSCR, 23, 1, ssi_sel_clks, ARRAY_SIZE(ssi_sel_clks));
+ clk[ssi1_div] = imx_clk_divider("ssi1_div", "ssi1_sel", CCM_PCDR0, 16, 6);
+ clk[ssi2_div] = imx_clk_divider("ssi2_div", "ssi2_sel", CCM_PCDR0, 26, 3);
+ clk[clko_en] = imx_clk_gate("clko_en", "clko_div", CCM_PCCR0, 0);
+ clk[ssi2_ipg_gate] = imx_clk_gate("ssi2_ipg_gate", "ipg", CCM_PCCR0, 0);
+ clk[ssi1_ipg_gate] = imx_clk_gate("ssi1_ipg_gate", "ipg", CCM_PCCR0, 1);
+ clk[slcdc_ipg_gate] = imx_clk_gate("slcdc_ipg_gate", "ipg", CCM_PCCR0, 2);
+ clk[sdhc3_ipg_gate] = imx_clk_gate("sdhc3_ipg_gate", "ipg", CCM_PCCR0, 3);
+ clk[sdhc2_ipg_gate] = imx_clk_gate("sdhc2_ipg_gate", "ipg", CCM_PCCR0, 4);
+ clk[sdhc1_ipg_gate] = imx_clk_gate("sdhc1_ipg_gate", "ipg", CCM_PCCR0, 5);
+ clk[scc_ipg_gate] = imx_clk_gate("scc_ipg_gate", "ipg", CCM_PCCR0, 6);
+ clk[sahara_ipg_gate] = imx_clk_gate("sahara_ipg_gate", "ipg", CCM_PCCR0, 7);
+ clk[rtc_ipg_gate] = imx_clk_gate("rtc_ipg_gate", "ipg", CCM_PCCR0, 9);
+ clk[pwm_ipg_gate] = imx_clk_gate("pwm_ipg_gate", "ipg", CCM_PCCR0, 11);
+ clk[owire_ipg_gate] = imx_clk_gate("owire_ipg_gate", "ipg", CCM_PCCR0, 12);
+ clk[lcdc_ipg_gate] = imx_clk_gate("lcdc_ipg_gate", "ipg", CCM_PCCR0, 14);
+ clk[kpp_ipg_gate] = imx_clk_gate("kpp_ipg_gate", "ipg", CCM_PCCR0, 15);
+ clk[iim_ipg_gate] = imx_clk_gate("iim_ipg_gate", "ipg", CCM_PCCR0, 16);
+ clk[i2c2_ipg_gate] = imx_clk_gate("i2c2_ipg_gate", "ipg", CCM_PCCR0, 17);
+ clk[i2c1_ipg_gate] = imx_clk_gate("i2c1_ipg_gate", "ipg", CCM_PCCR0, 18);
+ clk[gpt6_ipg_gate] = imx_clk_gate("gpt6_ipg_gate", "ipg", CCM_PCCR0, 19);
+ clk[gpt5_ipg_gate] = imx_clk_gate("gpt5_ipg_gate", "ipg", CCM_PCCR0, 20);
+ clk[gpt4_ipg_gate] = imx_clk_gate("gpt4_ipg_gate", "ipg", CCM_PCCR0, 21);
+ clk[gpt3_ipg_gate] = imx_clk_gate("gpt3_ipg_gate", "ipg", CCM_PCCR0, 22);
+ clk[gpt2_ipg_gate] = imx_clk_gate("gpt2_ipg_gate", "ipg", CCM_PCCR0, 23);
+ clk[gpt1_ipg_gate] = imx_clk_gate("gpt1_ipg_gate", "ipg", CCM_PCCR0, 24);
+ clk[gpio_ipg_gate] = imx_clk_gate("gpio_ipg_gate", "ipg", CCM_PCCR0, 25);
+ clk[fec_ipg_gate] = imx_clk_gate("fec_ipg_gate", "ipg", CCM_PCCR0, 26);
+ clk[emma_ipg_gate] = imx_clk_gate("emma_ipg_gate", "ipg", CCM_PCCR0, 27);
+ clk[dma_ipg_gate] = imx_clk_gate("dma_ipg_gate", "ipg", CCM_PCCR0, 28);
+ clk[cspi3_ipg_gate] = imx_clk_gate("cspi3_ipg_gate", "ipg", CCM_PCCR0, 29);
+ clk[cspi2_ipg_gate] = imx_clk_gate("cspi2_ipg_gate", "ipg", CCM_PCCR0, 30);
+ clk[cspi1_ipg_gate] = imx_clk_gate("cspi1_ipg_gate", "ipg", CCM_PCCR0, 31);
+ clk[nfc_baud_gate] = imx_clk_gate("nfc_baud_gate", "nfc_div", CCM_PCCR1, 3);
+ clk[ssi2_baud_gate] = imx_clk_gate("ssi2_baud_gate", "ssi2_div", CCM_PCCR1, 4);
+ clk[ssi1_baud_gate] = imx_clk_gate("ssi1_baud_gate", "ssi1_div", CCM_PCCR1, 5);
+ clk[vpu_baud_gate] = imx_clk_gate("vpu_baud_gate", "vpu_div", CCM_PCCR1, 6);
+ clk[per4_gate] = imx_clk_gate("per4_gate", "per4_div", CCM_PCCR1, 7);
+ clk[per3_gate] = imx_clk_gate("per3_gate", "per3_div", CCM_PCCR1, 8);
+ clk[per2_gate] = imx_clk_gate("per2_gate", "per2_div", CCM_PCCR1, 9);
+ clk[per1_gate] = imx_clk_gate("per1_gate", "per1_div", CCM_PCCR1, 10);
+ clk[usb_ahb_gate] = imx_clk_gate("usb_ahb_gate", "ahb", CCM_PCCR1, 11);
+ clk[slcdc_ahb_gate] = imx_clk_gate("slcdc_ahb_gate", "ahb", CCM_PCCR1, 12);
+ clk[sahara_ahb_gate] = imx_clk_gate("sahara_ahb_gate", "ahb", CCM_PCCR1, 13);
+ clk[lcdc_ahb_gate] = imx_clk_gate("lcdc_ahb_gate", "ahb", CCM_PCCR1, 15);
+ clk[vpu_ahb_gate] = imx_clk_gate("vpu_ahb_gate", "ahb", CCM_PCCR1, 16);
+ clk[fec_ahb_gate] = imx_clk_gate("fec_ahb_gate", "ahb", CCM_PCCR1, 17);
+ clk[emma_ahb_gate] = imx_clk_gate("emma_ahb_gate", "ahb", CCM_PCCR1, 18);
+ clk[emi_ahb_gate] = imx_clk_gate("emi_ahb_gate", "ahb", CCM_PCCR1, 19);
+ clk[dma_ahb_gate] = imx_clk_gate("dma_ahb_gate", "ahb", CCM_PCCR1, 20);
+ clk[csi_ahb_gate] = imx_clk_gate("csi_ahb_gate", "ahb", CCM_PCCR1, 21);
+ clk[brom_ahb_gate] = imx_clk_gate("brom_ahb_gate", "ahb", CCM_PCCR1, 22);
+ clk[ata_ahb_gate] = imx_clk_gate("ata_ahb_gate", "ahb", CCM_PCCR1, 23);
+ clk[wdog_ipg_gate] = imx_clk_gate("wdog_ipg_gate", "ipg", CCM_PCCR1, 24);
+ clk[usb_ipg_gate] = imx_clk_gate("usb_ipg_gate", "ipg", CCM_PCCR1, 25);
+ clk[uart6_ipg_gate] = imx_clk_gate("uart6_ipg_gate", "ipg", CCM_PCCR1, 26);
+ clk[uart5_ipg_gate] = imx_clk_gate("uart5_ipg_gate", "ipg", CCM_PCCR1, 27);
+ clk[uart4_ipg_gate] = imx_clk_gate("uart4_ipg_gate", "ipg", CCM_PCCR1, 28);
+ clk[uart3_ipg_gate] = imx_clk_gate("uart3_ipg_gate", "ipg", CCM_PCCR1, 29);
+ clk[uart2_ipg_gate] = imx_clk_gate("uart2_ipg_gate", "ipg", CCM_PCCR1, 30);
+ clk[uart1_ipg_gate] = imx_clk_gate("uart1_ipg_gate", "ipg", CCM_PCCR1, 31);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX27 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[uart5_ipg_gate], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[uart6_ipg_gate], "ipg", "imx21-uart.5");
+ clk_register_clkdev(clk[per1_gate], "per", "imx21-uart.5");
+ clk_register_clkdev(clk[gpt1_ipg_gate], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt2_ipg_gate], "ipg", "imx-gpt.1");
+ clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.1");
+ clk_register_clkdev(clk[gpt3_ipg_gate], "ipg", "imx-gpt.2");
+ clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.2");
+ clk_register_clkdev(clk[gpt4_ipg_gate], "ipg", "imx-gpt.3");
+ clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.3");
+ clk_register_clkdev(clk[gpt5_ipg_gate], "ipg", "imx-gpt.4");
+ clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.4");
+ clk_register_clkdev(clk[gpt6_ipg_gate], "ipg", "imx-gpt.5");
+ clk_register_clkdev(clk[per1_gate], "per", "imx-gpt.5");
+ clk_register_clkdev(clk[pwm_ipg_gate], NULL, "mxc_pwm.0");
+ clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.0");
+ clk_register_clkdev(clk[sdhc1_ipg_gate], "ipg", "mxc-mmc.0");
+ clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.1");
+ clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.1");
+ clk_register_clkdev(clk[per2_gate], "per", "mxc-mmc.2");
+ clk_register_clkdev(clk[sdhc2_ipg_gate], "ipg", "mxc-mmc.2");
+ clk_register_clkdev(clk[cspi1_ipg_gate], NULL, "imx27-cspi.0");
+ clk_register_clkdev(clk[cspi2_ipg_gate], NULL, "imx27-cspi.1");
+ clk_register_clkdev(clk[cspi3_ipg_gate], NULL, "imx27-cspi.2");
+ clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
+ clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
+ clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0");
+ clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
+ clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[vpu_baud_gate], "per", "imx-vpu");
+ clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "imx-vpu");
+ clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma");
+ clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma");
+ clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0");
+ clk_register_clkdev(clk[fec_ahb_gate], "ahb", "imx27-fec.0");
+ clk_register_clkdev(clk[wdog_ipg_gate], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[i2c1_ipg_gate], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
+ clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
+ clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma");
+ clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma");
+ clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
+ clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
+ clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
+ clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL);
+ clk_register_clkdev(clk[rtc_ipg_gate], "rtc", NULL);
+ clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL);
+ clk_register_clkdev(clk[cpu_div], "cpu", NULL);
+ clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL);
+ clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
+
+ mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
+ MX27_INT_GPT1);
+
+ clk_prepare_enable(clk[emi_ahb_gate]);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+int __init mx27_clocks_init_dt(void)
+{
+ struct device_node *np;
+ u32 fref = 26000000; /* default */
+
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
+ continue;
+
+ if (!of_property_read_u32(np, "clock-frequency", &fref))
+ break;
+ }
+
+ return mx27_clocks_init(fref);
+}
+#endif
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
new file mode 100644
index 000000000000..a854b9cae5ea
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -0,0 +1,182 @@
+/*
+ * Copyright (C) 2012 Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/mx31.h>
+#include <mach/common.h>
+
+#include "clk.h"
+#include "crmregs-imx3.h"
+
+static const char *mcu_main_sel[] = { "spll", "mpll", };
+static const char *per_sel[] = { "per_div", "ipg", };
+static const char *csi_sel[] = { "upll", "spll", };
+static const char *fir_sel[] = { "mcu_main", "upll", "spll" };
+
+enum mx31_clks {
+ ckih, ckil, mpll, spll, upll, mcu_main, hsp, ahb, nfc, ipg, per_div,
+ per, csi, fir, csi_div, usb_div_pre, usb_div_post, fir_div_pre,
+ fir_div_post, sdhc1_gate, sdhc2_gate, gpt_gate, epit1_gate, epit2_gate,
+ iim_gate, ata_gate, sdma_gate, cspi3_gate, rng_gate, uart1_gate,
+ uart2_gate, ssi1_gate, i2c1_gate, i2c2_gate, i2c3_gate, hantro_gate,
+ mstick1_gate, mstick2_gate, csi_gate, rtc_gate, wdog_gate, pwm_gate,
+ sim_gate, ect_gate, usb_gate, kpp_gate, ipu_gate, uart3_gate,
+ uart4_gate, uart5_gate, owire_gate, ssi2_gate, cspi1_gate, cspi2_gate,
+ gacc_gate, emi_gate, rtic_gate, firi_gate, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx31_clocks_init(unsigned long fref)
+{
+ void __iomem *base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
+ int i;
+
+ clk[ckih] = imx_clk_fixed("ckih", fref);
+ clk[ckil] = imx_clk_fixed("ckil", 32768);
+ clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MXC_CCM_MPCTL);
+ clk[spll] = imx_clk_pllv1("spll", "ckih", base + MXC_CCM_SRPCTL);
+ clk[upll] = imx_clk_pllv1("upll", "ckih", base + MXC_CCM_UPCTL);
+ clk[mcu_main] = imx_clk_mux("mcu_main", base + MXC_CCM_PMCR0, 31, 1, mcu_main_sel, ARRAY_SIZE(mcu_main_sel));
+ clk[hsp] = imx_clk_divider("hsp", "mcu_main", base + MXC_CCM_PDR0, 11, 3);
+ clk[ahb] = imx_clk_divider("ahb", "mcu_main", base + MXC_CCM_PDR0, 3, 3);
+ clk[nfc] = imx_clk_divider("nfc", "ahb", base + MXC_CCM_PDR0, 8, 3);
+ clk[ipg] = imx_clk_divider("ipg", "ahb", base + MXC_CCM_PDR0, 6, 2);
+ clk[per_div] = imx_clk_divider("per_div", "upll", base + MXC_CCM_PDR0, 16, 5);
+ clk[per] = imx_clk_mux("per", base + MXC_CCM_CCMR, 24, 1, per_sel, ARRAY_SIZE(per_sel));
+ clk[csi] = imx_clk_mux("csi_sel", base + MXC_CCM_CCMR, 25, 1, csi_sel, ARRAY_SIZE(csi_sel));
+ clk[fir] = imx_clk_mux("fir_sel", base + MXC_CCM_CCMR, 11, 2, fir_sel, ARRAY_SIZE(fir_sel));
+ clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MXC_CCM_PDR0, 23, 9);
+ clk[usb_div_pre] = imx_clk_divider("usb_div_pre", "upll", base + MXC_CCM_PDR1, 30, 2);
+ clk[usb_div_post] = imx_clk_divider("usb_div_post", "usb_div_pre", base + MXC_CCM_PDR1, 27, 3);
+ clk[fir_div_pre] = imx_clk_divider("fir_div_pre", "fir_sel", base + MXC_CCM_PDR1, 24, 3);
+ clk[fir_div_post] = imx_clk_divider("fir_div_post", "fir_div_pre", base + MXC_CCM_PDR1, 23, 6);
+ clk[sdhc1_gate] = imx_clk_gate2("sdhc1_gate", "per", base + MXC_CCM_CGR0, 0);
+ clk[sdhc2_gate] = imx_clk_gate2("sdhc2_gate", "per", base + MXC_CCM_CGR0, 2);
+ clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per", base + MXC_CCM_CGR0, 4);
+ clk[epit1_gate] = imx_clk_gate2("epit1_gate", "per", base + MXC_CCM_CGR0, 6);
+ clk[epit2_gate] = imx_clk_gate2("epit2_gate", "per", base + MXC_CCM_CGR0, 8);
+ clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MXC_CCM_CGR0, 10);
+ clk[ata_gate] = imx_clk_gate2("ata_gate", "ipg", base + MXC_CCM_CGR0, 12);
+ clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MXC_CCM_CGR0, 14);
+ clk[cspi3_gate] = imx_clk_gate2("cspi3_gate", "ipg", base + MXC_CCM_CGR0, 16);
+ clk[rng_gate] = imx_clk_gate2("rng_gate", "ipg", base + MXC_CCM_CGR0, 18);
+ clk[uart1_gate] = imx_clk_gate2("uart1_gate", "per", base + MXC_CCM_CGR0, 20);
+ clk[uart2_gate] = imx_clk_gate2("uart2_gate", "per", base + MXC_CCM_CGR0, 22);
+ clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "spll", base + MXC_CCM_CGR0, 24);
+ clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per", base + MXC_CCM_CGR0, 26);
+ clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per", base + MXC_CCM_CGR0, 28);
+ clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per", base + MXC_CCM_CGR0, 30);
+ clk[hantro_gate] = imx_clk_gate2("hantro_gate", "per", base + MXC_CCM_CGR1, 0);
+ clk[mstick1_gate] = imx_clk_gate2("mstick1_gate", "per", base + MXC_CCM_CGR1, 2);
+ clk[mstick2_gate] = imx_clk_gate2("mstick2_gate", "per", base + MXC_CCM_CGR1, 4);
+ clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MXC_CCM_CGR1, 6);
+ clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MXC_CCM_CGR1, 8);
+ clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MXC_CCM_CGR1, 10);
+ clk[pwm_gate] = imx_clk_gate2("pwm_gate", "per", base + MXC_CCM_CGR1, 12);
+ clk[sim_gate] = imx_clk_gate2("sim_gate", "per", base + MXC_CCM_CGR1, 14);
+ clk[ect_gate] = imx_clk_gate2("ect_gate", "per", base + MXC_CCM_CGR1, 16);
+ clk[usb_gate] = imx_clk_gate2("usb_gate", "ahb", base + MXC_CCM_CGR1, 18);
+ clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MXC_CCM_CGR1, 20);
+ clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MXC_CCM_CGR1, 22);
+ clk[uart3_gate] = imx_clk_gate2("uart3_gate", "per", base + MXC_CCM_CGR1, 24);
+ clk[uart4_gate] = imx_clk_gate2("uart4_gate", "per", base + MXC_CCM_CGR1, 26);
+ clk[uart5_gate] = imx_clk_gate2("uart5_gate", "per", base + MXC_CCM_CGR1, 28);
+ clk[owire_gate] = imx_clk_gate2("owire_gate", "per", base + MXC_CCM_CGR1, 30);
+ clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "spll", base + MXC_CCM_CGR2, 0);
+ clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MXC_CCM_CGR2, 2);
+ clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MXC_CCM_CGR2, 4);
+ clk[gacc_gate] = imx_clk_gate2("gacc_gate", "per", base + MXC_CCM_CGR2, 6);
+ clk[emi_gate] = imx_clk_gate2("emi_gate", "ahb", base + MXC_CCM_CGR2, 8);
+ clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MXC_CCM_CGR2, 10);
+ clk[firi_gate] = imx_clk_gate2("firi_gate", "upll", base+MXC_CCM_CGR2, 12);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("imx31 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[cspi1_gate], NULL, "imx31-cspi.0");
+ clk_register_clkdev(clk[cspi2_gate], NULL, "imx31-cspi.1");
+ clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2");
+ clk_register_clkdev(clk[pwm_gate], "pwm", NULL);
+ clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[rtc_gate], "rtc", NULL);
+ clk_register_clkdev(clk[epit1_gate], "epit", NULL);
+ clk_register_clkdev(clk[epit2_gate], "epit", NULL);
+ clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
+ clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
+ clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+ clk_register_clkdev(clk[kpp_gate], "kpp", NULL);
+ clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
+ /* i.mx31 has the i.mx21 type uart */
+ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[uart4_gate], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[uart5_gate], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1.0");
+ clk_register_clkdev(clk[sdhc1_gate], NULL, "mxc-mmc.0");
+ clk_register_clkdev(clk[sdhc2_gate], NULL, "mxc-mmc.1");
+ clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1");
+ clk_register_clkdev(clk[firi_gate], "firi", NULL);
+ clk_register_clkdev(clk[ata_gate], NULL, "pata_imx");
+ clk_register_clkdev(clk[rtic_gate], "rtic", NULL);
+ clk_register_clkdev(clk[rng_gate], "rng", NULL);
+ clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma");
+ clk_register_clkdev(clk[iim_gate], "iim", NULL);
+
+ clk_set_parent(clk[csi], clk[upll]);
+ clk_prepare_enable(clk[emi_gate]);
+ clk_prepare_enable(clk[iim_gate]);
+ mx31_revision();
+ clk_disable_unprepare(clk[iim_gate]);
+
+ mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
+ MX31_INT_GPT);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c
new file mode 100644
index 000000000000..a9e60bf7dd75
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx35.c
@@ -0,0 +1,278 @@
+/*
+ * Copyright (C) 2012 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include "crmregs-imx3.h"
+#include "clk.h"
+
+struct arm_ahb_div {
+ unsigned char arm, ahb, sel;
+};
+
+static struct arm_ahb_div clk_consumer[] = {
+ { .arm = 1, .ahb = 4, .sel = 0},
+ { .arm = 1, .ahb = 3, .sel = 1},
+ { .arm = 2, .ahb = 2, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 4, .ahb = 1, .sel = 0},
+ { .arm = 1, .ahb = 5, .sel = 0},
+ { .arm = 1, .ahb = 8, .sel = 0},
+ { .arm = 1, .ahb = 6, .sel = 1},
+ { .arm = 2, .ahb = 4, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+ { .arm = 4, .ahb = 2, .sel = 0},
+ { .arm = 0, .ahb = 0, .sel = 0},
+};
+
+static char hsp_div_532[] = { 4, 8, 3, 0 };
+static char hsp_div_400[] = { 3, 6, 3, 0 };
+
+static const char *std_sel[] = {"ppll", "arm"};
+static const char *ipg_per_sel[] = {"ahb_per_div", "arm_per_div"};
+
+enum mx35_clks {
+ ckih, mpll, ppll, mpll_075, arm, hsp, hsp_div, hsp_sel, ahb, ipg,
+ arm_per_div, ahb_per_div, ipg_per, uart_sel, uart_div, esdhc_sel,
+ esdhc1_div, esdhc2_div, esdhc3_div, spdif_sel, spdif_div_pre,
+ spdif_div_post, ssi_sel, ssi1_div_pre, ssi1_div_post, ssi2_div_pre,
+ ssi2_div_post, usb_sel, usb_div, nfc_div, asrc_gate, pata_gate,
+ audmux_gate, can1_gate, can2_gate, cspi1_gate, cspi2_gate, ect_gate,
+ edio_gate, emi_gate, epit1_gate, epit2_gate, esai_gate, esdhc1_gate,
+ esdhc2_gate, esdhc3_gate, fec_gate, gpio1_gate, gpio2_gate, gpio3_gate,
+ gpt_gate, i2c1_gate, i2c2_gate, i2c3_gate, iomuxc_gate, ipu_gate,
+ kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate,
+ rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate,
+ ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate,
+ wdog_gate, max_gate, admux_gate, csi_gate, iim_gate, gpu2d_gate,
+ clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx35_clocks_init()
+{
+ void __iomem *base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
+ u32 pdr0, consumer_sel, hsp_sel;
+ struct arm_ahb_div *aad;
+ unsigned char *hsp_div;
+ int i;
+
+ pdr0 = __raw_readl(base + MXC_CCM_PDR0);
+ consumer_sel = (pdr0 >> 16) & 0xf;
+ aad = &clk_consumer[consumer_sel];
+ if (!aad->arm) {
+ pr_err("i.MX35 clk: illegal consumer mux selection 0x%x\n", consumer_sel);
+ /*
+ * We are basically stuck. Continue with a default entry and hope we
+ * get far enough to actually show the above message
+ */
+ aad = &clk_consumer[0];
+ }
+
+ clk[ckih] = imx_clk_fixed("ckih", 24000000);
+ clk[mpll] = imx_clk_pllv1("mpll", "ckih", base + MX35_CCM_MPCTL);
+ clk[ppll] = imx_clk_pllv1("ppll", "ckih", base + MX35_CCM_PPCTL);
+
+ clk[mpll] = imx_clk_fixed_factor("mpll_075", "mpll", 3, 4);
+
+ if (aad->sel)
+ clk[arm] = imx_clk_fixed_factor("arm", "mpll_075", 1, aad->arm);
+ else
+ clk[arm] = imx_clk_fixed_factor("arm", "mpll", 1, aad->arm);
+
+ if (clk_get_rate(clk[arm]) > 400000000)
+ hsp_div = hsp_div_532;
+ else
+ hsp_div = hsp_div_400;
+
+ hsp_sel = (pdr0 >> 20) & 0x3;
+ if (!hsp_div[hsp_sel]) {
+ pr_err("i.MX35 clk: illegal hsp clk selection 0x%x\n", hsp_sel);
+ hsp_sel = 0;
+ }
+
+ clk[hsp] = imx_clk_fixed_factor("hsp", "arm", 1, hsp_div[hsp_sel]);
+
+ clk[ahb] = imx_clk_fixed_factor("ahb", "arm", 1, aad->ahb);
+ clk[ipg] = imx_clk_fixed_factor("ipg", "ahb", 1, 2);
+
+ clk[arm_per_div] = imx_clk_divider("arm_per_div", "arm", base + MX35_CCM_PDR4, 16, 6);
+ clk[ahb_per_div] = imx_clk_divider("ahb_per_div", "ahb", base + MXC_CCM_PDR0, 12, 3);
+ clk[ipg_per] = imx_clk_mux("ipg_per", base + MXC_CCM_PDR0, 26, 1, ipg_per_sel, ARRAY_SIZE(ipg_per_sel));
+
+ clk[uart_sel] = imx_clk_mux("uart_sel", base + MX35_CCM_PDR3, 14, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[uart_div] = imx_clk_divider("uart_div", "uart_sel", base + MX35_CCM_PDR4, 10, 6);
+
+ clk[esdhc_sel] = imx_clk_mux("esdhc_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[esdhc1_div] = imx_clk_divider("esdhc1_div", "esdhc_sel", base + MX35_CCM_PDR3, 0, 6);
+ clk[esdhc2_div] = imx_clk_divider("esdhc2_div", "esdhc_sel", base + MX35_CCM_PDR3, 8, 6);
+ clk[esdhc3_div] = imx_clk_divider("esdhc3_div", "esdhc_sel", base + MX35_CCM_PDR3, 16, 6);
+
+ clk[spdif_sel] = imx_clk_mux("spdif_sel", base + MX35_CCM_PDR3, 22, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[spdif_div_pre] = imx_clk_divider("spdif_div_pre", "spdif_sel", base + MX35_CCM_PDR3, 29, 3); /* divide by 1 not allowed */
+ clk[spdif_div_post] = imx_clk_divider("spdif_div_post", "spdif_div_pre", base + MX35_CCM_PDR3, 23, 6);
+
+ clk[ssi_sel] = imx_clk_mux("ssi_sel", base + MX35_CCM_PDR2, 6, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[ssi1_div_pre] = imx_clk_divider("ssi1_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 24, 3);
+ clk[ssi1_div_post] = imx_clk_divider("ssi1_div_post", "ssi1_div_pre", base + MX35_CCM_PDR2, 0, 6);
+ clk[ssi2_div_pre] = imx_clk_divider("ssi2_div_pre", "ssi_sel", base + MX35_CCM_PDR2, 27, 3);
+ clk[ssi2_div_post] = imx_clk_divider("ssi2_div_post", "ssi2_div_pre", base + MX35_CCM_PDR2, 8, 6);
+
+ clk[usb_sel] = imx_clk_mux("usb_sel", base + MX35_CCM_PDR4, 9, 1, std_sel, ARRAY_SIZE(std_sel));
+ clk[usb_div] = imx_clk_divider("usb_div", "usb_sel", base + MX35_CCM_PDR4, 22, 6);
+
+ clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4);
+
+ clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0);
+ clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2);
+ clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4);
+ clk[can1_gate] = imx_clk_gate2("can1_gate", "ipg", base + MX35_CCM_CGR0, 6);
+ clk[can2_gate] = imx_clk_gate2("can2_gate", "ipg", base + MX35_CCM_CGR0, 8);
+ clk[cspi1_gate] = imx_clk_gate2("cspi1_gate", "ipg", base + MX35_CCM_CGR0, 10);
+ clk[cspi2_gate] = imx_clk_gate2("cspi2_gate", "ipg", base + MX35_CCM_CGR0, 12);
+ clk[ect_gate] = imx_clk_gate2("ect_gate", "ipg", base + MX35_CCM_CGR0, 14);
+ clk[edio_gate] = imx_clk_gate2("edio_gate", "ipg", base + MX35_CCM_CGR0, 16);
+ clk[emi_gate] = imx_clk_gate2("emi_gate", "ipg", base + MX35_CCM_CGR0, 18);
+ clk[epit1_gate] = imx_clk_gate2("epit1_gate", "ipg", base + MX35_CCM_CGR0, 20);
+ clk[epit2_gate] = imx_clk_gate2("epit2_gate", "ipg", base + MX35_CCM_CGR0, 22);
+ clk[esai_gate] = imx_clk_gate2("esai_gate", "ipg", base + MX35_CCM_CGR0, 24);
+ clk[esdhc1_gate] = imx_clk_gate2("esdhc1_gate", "esdhc1_div", base + MX35_CCM_CGR0, 26);
+ clk[esdhc2_gate] = imx_clk_gate2("esdhc2_gate", "esdhc2_div", base + MX35_CCM_CGR0, 28);
+ clk[esdhc3_gate] = imx_clk_gate2("esdhc3_gate", "esdhc3_div", base + MX35_CCM_CGR0, 30);
+
+ clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", base + MX35_CCM_CGR1, 0);
+ clk[gpio1_gate] = imx_clk_gate2("gpio1_gate", "ipg", base + MX35_CCM_CGR1, 2);
+ clk[gpio2_gate] = imx_clk_gate2("gpio2_gate", "ipg", base + MX35_CCM_CGR1, 4);
+ clk[gpio3_gate] = imx_clk_gate2("gpio3_gate", "ipg", base + MX35_CCM_CGR1, 6);
+ clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", base + MX35_CCM_CGR1, 8);
+ clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "ipg_per", base + MX35_CCM_CGR1, 10);
+ clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "ipg_per", base + MX35_CCM_CGR1, 12);
+ clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "ipg_per", base + MX35_CCM_CGR1, 14);
+ clk[iomuxc_gate] = imx_clk_gate2("iomuxc_gate", "ipg", base + MX35_CCM_CGR1, 16);
+ clk[ipu_gate] = imx_clk_gate2("ipu_gate", "hsp", base + MX35_CCM_CGR1, 18);
+ clk[kpp_gate] = imx_clk_gate2("kpp_gate", "ipg", base + MX35_CCM_CGR1, 20);
+ clk[mlb_gate] = imx_clk_gate2("mlb_gate", "ahb", base + MX35_CCM_CGR1, 22);
+ clk[mshc_gate] = imx_clk_gate2("mshc_gate", "dummy", base + MX35_CCM_CGR1, 24);
+ clk[owire_gate] = imx_clk_gate2("owire_gate", "ipg_per", base + MX35_CCM_CGR1, 26);
+ clk[pwm_gate] = imx_clk_gate2("pwm_gate", "ipg_per", base + MX35_CCM_CGR1, 28);
+ clk[rngc_gate] = imx_clk_gate2("rngc_gate", "ipg", base + MX35_CCM_CGR1, 30);
+
+ clk[rtc_gate] = imx_clk_gate2("rtc_gate", "ipg", base + MX35_CCM_CGR2, 0);
+ clk[rtic_gate] = imx_clk_gate2("rtic_gate", "ahb", base + MX35_CCM_CGR2, 2);
+ clk[scc_gate] = imx_clk_gate2("scc_gate", "ipg", base + MX35_CCM_CGR2, 4);
+ clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ahb", base + MX35_CCM_CGR2, 6);
+ clk[spba_gate] = imx_clk_gate2("spba_gate", "ipg", base + MX35_CCM_CGR2, 8);
+ clk[spdif_gate] = imx_clk_gate2("spdif_gate", "spdif_div_post", base + MX35_CCM_CGR2, 10);
+ clk[ssi1_gate] = imx_clk_gate2("ssi1_gate", "ssi1_div_post", base + MX35_CCM_CGR2, 12);
+ clk[ssi2_gate] = imx_clk_gate2("ssi2_gate", "ssi2_div_post", base + MX35_CCM_CGR2, 14);
+ clk[uart1_gate] = imx_clk_gate2("uart1_gate", "uart_div", base + MX35_CCM_CGR2, 16);
+ clk[uart2_gate] = imx_clk_gate2("uart2_gate", "uart_div", base + MX35_CCM_CGR2, 18);
+ clk[uart3_gate] = imx_clk_gate2("uart3_gate", "uart_div", base + MX35_CCM_CGR2, 20);
+ clk[usbotg_gate] = imx_clk_gate2("usbotg_gate", "ahb", base + MX35_CCM_CGR2, 22);
+ clk[wdog_gate] = imx_clk_gate2("wdog_gate", "ipg", base + MX35_CCM_CGR2, 24);
+ clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26);
+ clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30);
+
+ clk[csi_gate] = imx_clk_gate2("csi_gate", "ipg", base + MX35_CCM_CGR3, 0);
+ clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2);
+ clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX35 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+
+ clk_register_clkdev(clk[pata_gate], NULL, "pata_imx");
+ clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0");
+ clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1");
+ clk_register_clkdev(clk[cspi1_gate], "per", "imx35-cspi.0");
+ clk_register_clkdev(clk[cspi1_gate], "ipg", "imx35-cspi.0");
+ clk_register_clkdev(clk[cspi2_gate], "per", "imx35-cspi.1");
+ clk_register_clkdev(clk[cspi2_gate], "ipg", "imx35-cspi.1");
+ clk_register_clkdev(clk[epit1_gate], NULL, "imx-epit.0");
+ clk_register_clkdev(clk[epit2_gate], NULL, "imx-epit.1");
+ clk_register_clkdev(clk[esdhc1_gate], "per", "sdhci-esdhc-imx35.0");
+ clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.0");
+ clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.0");
+ clk_register_clkdev(clk[esdhc2_gate], "per", "sdhci-esdhc-imx35.1");
+ clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.1");
+ clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.1");
+ clk_register_clkdev(clk[esdhc3_gate], "per", "sdhci-esdhc-imx35.2");
+ clk_register_clkdev(clk[ipg], "ipg", "sdhci-esdhc-imx35.2");
+ clk_register_clkdev(clk[ahb], "ahb", "sdhci-esdhc-imx35.2");
+ /* i.mx35 has the i.mx27 type fec */
+ clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
+ clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
+ clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
+ clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1");
+ clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0");
+ clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1");
+ clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1");
+ /* i.mx35 has the i.mx21 type uart */
+ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[uart2_gate], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[uart3_gate], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0");
+
+ clk_prepare_enable(clk[spba_gate]);
+ clk_prepare_enable(clk[gpio1_gate]);
+ clk_prepare_enable(clk[gpio2_gate]);
+ clk_prepare_enable(clk[gpio3_gate]);
+ clk_prepare_enable(clk[iim_gate]);
+ clk_prepare_enable(clk[emi_gate]);
+
+ imx_print_silicon_rev("i.MX35", mx35_revision());
+
+#ifdef CONFIG_MXC_USE_EPIT
+ epit_timer_init(&epit1_clk,
+ MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+#else
+ mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
+ MX35_INT_GPT);
+#endif
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
new file mode 100644
index 000000000000..fcd94f3b0f0e
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -0,0 +1,506 @@
+/*
+ * Copyright (C) 2011 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/clkdev.h>
+#include <linux/of.h>
+#include <linux/err.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+
+#include "crm-regs-imx5.h"
+#include "clk.h"
+
+/* Low-power Audio Playback Mode clock */
+static const char *lp_apm_sel[] = { "osc", };
+
+/* This is used multiple times */
+static const char *standard_pll_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "lp_apm", };
+static const char *periph_apm_sel[] = { "pll1_sw", "pll3_sw", "lp_apm", };
+static const char *main_bus_sel[] = { "pll2_sw", "periph_apm", };
+static const char *per_lp_apm_sel[] = { "main_bus", "lp_apm", };
+static const char *per_root_sel[] = { "per_podf", "ipg", };
+static const char *esdhc_c_sel[] = { "esdhc_a_podf", "esdhc_b_podf", };
+static const char *esdhc_d_sel[] = { "esdhc_a_podf", "esdhc_b_podf", };
+static const char *ssi_apm_sels[] = { "ckih1", "lp_amp", "ckih2", };
+static const char *ssi_clk_sels[] = { "pll1_sw", "pll2_sw", "pll3_sw", "ssi_apm", };
+static const char *ssi3_clk_sels[] = { "ssi1_root_gate", "ssi2_root_gate", };
+static const char *ssi_ext1_com_sels[] = { "ssi_ext1_podf", "ssi1_root_gate", };
+static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", };
+static const char *emi_slow_sel[] = { "main_bus", "ahb", };
+static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", };
+static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", };
+static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0", };
+static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", };
+static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", };
+static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1", };
+static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", };
+static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", };
+static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", };
+static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", };
+static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", };
+
+enum imx5_clks {
+ dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred,
+ uart_root, esdhc_a_pred, esdhc_b_pred, esdhc_c_s, esdhc_d_s,
+ emi_sel, emi_slow_podf, nfc_podf, ecspi_pred, ecspi_podf, usboh3_pred,
+ usboh3_podf, usb_phy_pred, usb_phy_podf, cpu_podf, di_pred, tve_di,
+ tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate,
+ uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate,
+ gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate,
+ gpt_gate, fec_gate, usboh3_per_gate, esdhc1_ipg_gate, esdhc2_ipg_gate,
+ esdhc3_ipg_gate, esdhc4_ipg_gate, ssi1_ipg_gate, ssi2_ipg_gate,
+ ssi3_ipg_gate, ecspi1_ipg_gate, ecspi1_per_gate, ecspi2_ipg_gate,
+ ecspi2_per_gate, cspi_ipg_gate, sdma_gate, emi_slow_gate, ipu_s,
+ ipu_gate, nfc_gate, ipu_di1_gate, vpu_s, vpu_gate,
+ vpu_reference_gate, uart4_ipg_gate, uart4_per_gate, uart5_ipg_gate,
+ uart5_per_gate, tve_gate, tve_pred, esdhc1_per_gate, esdhc2_per_gate,
+ esdhc3_per_gate, esdhc4_per_gate, usb_phy_gate, hsi2c_gate,
+ mipi_hsc1_gate, mipi_hsc2_gate, mipi_esc_gate, mipi_hsp_gate,
+ ldb_di1_div_3_5, ldb_di1_div, ldb_di0_div_3_5, ldb_di0_div,
+ ldb_di1_gate, can2_serial_gate, can2_ipg_gate, i2c3_gate, lp_apm,
+ periph_apm, main_bus, ahb_max, aips_tz1, aips_tz2, tmax1, tmax2,
+ tmax3, spba, uart_sel, esdhc_a_sel, esdhc_b_sel, esdhc_a_podf,
+ esdhc_b_podf, ecspi_sel, usboh3_sel, usb_phy_sel, iim_gate,
+ usboh3_gate, emi_fast_gate, ipu_di0_gate,gpc_dvfs, pll1_sw, pll2_sw,
+ pll3_sw, ipu_di0_sel, ipu_di1_sel, tve_ext_sel, mx51_mipi, pll4_sw,
+ ldb_di1_sel, di_pll4_podf, ldb_di0_sel, ldb_di0_gate, usb_phy1_gate,
+ usb_phy2_gate, per_lp_apm, per_pred1, per_pred2, per_podf, per_root,
+ ssi_apm, ssi1_root_sel, ssi2_root_sel, ssi3_root_sel, ssi_ext1_sel,
+ ssi_ext2_sel, ssi_ext1_com_sel, ssi_ext2_com_sel, ssi1_root_pred,
+ ssi1_root_podf, ssi2_root_pred, ssi2_root_podf, ssi_ext1_pred,
+ ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate,
+ ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate,
+ clk_max
+};
+
+static struct clk *clk[clk_max];
+
+static void __init mx5_clocks_common_init(unsigned long rate_ckil,
+ unsigned long rate_osc, unsigned long rate_ckih1,
+ unsigned long rate_ckih2)
+{
+ int i;
+
+ clk[dummy] = imx_clk_fixed("dummy", 0);
+ clk[ckil] = imx_clk_fixed("ckil", rate_ckil);
+ clk[osc] = imx_clk_fixed("osc", rate_osc);
+ clk[ckih1] = imx_clk_fixed("ckih1", rate_ckih1);
+ clk[ckih2] = imx_clk_fixed("ckih2", rate_ckih2);
+
+ clk[lp_apm] = imx_clk_mux("lp_apm", MXC_CCM_CCSR, 9, 1,
+ lp_apm_sel, ARRAY_SIZE(lp_apm_sel));
+ clk[periph_apm] = imx_clk_mux("periph_apm", MXC_CCM_CBCMR, 12, 2,
+ periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
+ clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
+ main_bus_sel, ARRAY_SIZE(main_bus_sel));
+ clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
+ per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
+ clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
+ clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
+ clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
+ clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
+ per_root_sel, ARRAY_SIZE(per_root_sel));
+ clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
+ clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
+ clk[aips_tz1] = imx_clk_gate2("aips_tz1", "ahb", MXC_CCM_CCGR0, 24);
+ clk[aips_tz2] = imx_clk_gate2("aips_tz2", "ahb", MXC_CCM_CCGR0, 26);
+ clk[tmax1] = imx_clk_gate2("tmax1", "ahb", MXC_CCM_CCGR1, 0);
+ clk[tmax2] = imx_clk_gate2("tmax2", "ahb", MXC_CCM_CCGR1, 2);
+ clk[tmax3] = imx_clk_gate2("tmax3", "ahb", MXC_CCM_CCGR1, 4);
+ clk[spba] = imx_clk_gate2("spba", "ipg", MXC_CCM_CCGR5, 0);
+ clk[ipg] = imx_clk_divider("ipg", "ahb", MXC_CCM_CBCDR, 8, 2);
+ clk[axi_a] = imx_clk_divider("axi_a", "main_bus", MXC_CCM_CBCDR, 16, 3);
+ clk[axi_b] = imx_clk_divider("axi_b", "main_bus", MXC_CCM_CBCDR, 19, 3);
+ clk[uart_sel] = imx_clk_mux("uart_sel", MXC_CCM_CSCMR1, 24, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[uart_pred] = imx_clk_divider("uart_pred", "uart_sel", MXC_CCM_CSCDR1, 3, 3);
+ clk[uart_root] = imx_clk_divider("uart_root", "uart_pred", MXC_CCM_CSCDR1, 0, 3);
+
+ clk[esdhc_a_sel] = imx_clk_mux("esdhc_a_sel", MXC_CCM_CSCMR1, 20, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[esdhc_b_sel] = imx_clk_mux("esdhc_b_sel", MXC_CCM_CSCMR1, 16, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[esdhc_a_pred] = imx_clk_divider("esdhc_a_pred", "esdhc_a_sel", MXC_CCM_CSCDR1, 16, 3);
+ clk[esdhc_a_podf] = imx_clk_divider("esdhc_a_podf", "esdhc_a_pred", MXC_CCM_CSCDR1, 11, 3);
+ clk[esdhc_b_pred] = imx_clk_divider("esdhc_b_pred", "esdhc_b_sel", MXC_CCM_CSCDR1, 22, 3);
+ clk[esdhc_b_podf] = imx_clk_divider("esdhc_b_podf", "esdhc_b_pred", MXC_CCM_CSCDR1, 19, 3);
+ clk[esdhc_c_s] = imx_clk_mux("esdhc_c_sel", MXC_CCM_CSCMR1, 19, 1, esdhc_c_sel, ARRAY_SIZE(esdhc_c_sel));
+ clk[esdhc_d_s] = imx_clk_mux("esdhc_d_sel", MXC_CCM_CSCMR1, 18, 1, esdhc_d_sel, ARRAY_SIZE(esdhc_d_sel));
+
+ clk[emi_sel] = imx_clk_mux("emi_sel", MXC_CCM_CBCDR, 26, 1,
+ emi_slow_sel, ARRAY_SIZE(emi_slow_sel));
+ clk[emi_slow_podf] = imx_clk_divider("emi_slow_podf", "emi_sel", MXC_CCM_CBCDR, 22, 3);
+ clk[nfc_podf] = imx_clk_divider("nfc_podf", "emi_slow_podf", MXC_CCM_CBCDR, 13, 3);
+ clk[ecspi_sel] = imx_clk_mux("ecspi_sel", MXC_CCM_CSCMR1, 4, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[ecspi_pred] = imx_clk_divider("ecspi_pred", "ecspi_sel", MXC_CCM_CSCDR2, 25, 3);
+ clk[ecspi_podf] = imx_clk_divider("ecspi_podf", "ecspi_pred", MXC_CCM_CSCDR2, 19, 6);
+ clk[usboh3_sel] = imx_clk_mux("usboh3_sel", MXC_CCM_CSCMR1, 22, 2,
+ standard_pll_sel, ARRAY_SIZE(standard_pll_sel));
+ clk[usboh3_pred] = imx_clk_divider("usboh3_pred", "usboh3_sel", MXC_CCM_CSCDR1, 8, 3);
+ clk[usboh3_podf] = imx_clk_divider("usboh3_podf", "usboh3_pred", MXC_CCM_CSCDR1, 6, 2);
+ clk[usb_phy_pred] = imx_clk_divider("usb_phy_pred", "pll3_sw", MXC_CCM_CDCDR, 3, 3);
+ clk[usb_phy_podf] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3);
+ clk[usb_phy_sel] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1,
+ usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
+ clk[cpu_podf] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3);
+ clk[di_pred] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
+ clk[tve_di] = imx_clk_fixed("tve_di", 65000000); /* FIXME */
+ clk[tve_s] = imx_clk_mux("tve_sel", MXC_CCM_CSCMR1, 7, 1, tve_sel, ARRAY_SIZE(tve_sel));
+ clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
+ clk[uart1_ipg_gate] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
+ clk[uart1_per_gate] = imx_clk_gate2("uart1_per_gate", "uart_root", MXC_CCM_CCGR1, 8);
+ clk[uart2_ipg_gate] = imx_clk_gate2("uart2_ipg_gate", "ipg", MXC_CCM_CCGR1, 10);
+ clk[uart2_per_gate] = imx_clk_gate2("uart2_per_gate", "uart_root", MXC_CCM_CCGR1, 12);
+ clk[uart3_ipg_gate] = imx_clk_gate2("uart3_ipg_gate", "ipg", MXC_CCM_CCGR1, 14);
+ clk[uart3_per_gate] = imx_clk_gate2("uart3_per_gate", "uart_root", MXC_CCM_CCGR1, 16);
+ clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per_root", MXC_CCM_CCGR1, 18);
+ clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per_root", MXC_CCM_CCGR1, 20);
+ clk[gpt_ipg_gate] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 20);
+ clk[pwm1_ipg_gate] = imx_clk_gate2("pwm1_ipg_gate", "ipg", MXC_CCM_CCGR2, 10);
+ clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
+ clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
+ clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
+ clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
+ clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
+ clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
+ clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
+ clk[esdhc1_ipg_gate] = imx_clk_gate2("esdhc1_ipg_gate", "ipg", MXC_CCM_CCGR3, 0);
+ clk[esdhc2_ipg_gate] = imx_clk_gate2("esdhc2_ipg_gate", "ipg", MXC_CCM_CCGR3, 4);
+ clk[esdhc3_ipg_gate] = imx_clk_gate2("esdhc3_ipg_gate", "ipg", MXC_CCM_CCGR3, 8);
+ clk[esdhc4_ipg_gate] = imx_clk_gate2("esdhc4_ipg_gate", "ipg", MXC_CCM_CCGR3, 12);
+ clk[ssi1_ipg_gate] = imx_clk_gate2("ssi1_ipg_gate", "ipg", MXC_CCM_CCGR3, 16);
+ clk[ssi2_ipg_gate] = imx_clk_gate2("ssi2_ipg_gate", "ipg", MXC_CCM_CCGR3, 20);
+ clk[ssi3_ipg_gate] = imx_clk_gate2("ssi3_ipg_gate", "ipg", MXC_CCM_CCGR3, 24);
+ clk[ecspi1_ipg_gate] = imx_clk_gate2("ecspi1_ipg_gate", "ipg", MXC_CCM_CCGR4, 18);
+ clk[ecspi1_per_gate] = imx_clk_gate2("ecspi1_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 20);
+ clk[ecspi2_ipg_gate] = imx_clk_gate2("ecspi2_ipg_gate", "ipg", MXC_CCM_CCGR4, 22);
+ clk[ecspi2_per_gate] = imx_clk_gate2("ecspi2_per_gate", "ecspi_podf", MXC_CCM_CCGR4, 24);
+ clk[cspi_ipg_gate] = imx_clk_gate2("cspi_ipg_gate", "ipg", MXC_CCM_CCGR4, 26);
+ clk[sdma_gate] = imx_clk_gate2("sdma_gate", "ipg", MXC_CCM_CCGR4, 30);
+ clk[emi_fast_gate] = imx_clk_gate2("emi_fast_gate", "dummy", MXC_CCM_CCGR5, 14);
+ clk[emi_slow_gate] = imx_clk_gate2("emi_slow_gate", "emi_slow_podf", MXC_CCM_CCGR5, 16);
+ clk[ipu_s] = imx_clk_mux("ipu_sel", MXC_CCM_CBCMR, 6, 2, ipu_sel, ARRAY_SIZE(ipu_sel));
+ clk[ipu_gate] = imx_clk_gate2("ipu_gate", "ipu_sel", MXC_CCM_CCGR5, 10);
+ clk[nfc_gate] = imx_clk_gate2("nfc_gate", "nfc_podf", MXC_CCM_CCGR5, 20);
+ clk[ipu_di0_gate] = imx_clk_gate2("ipu_di0_gate", "ipu_di0_sel", MXC_CCM_CCGR6, 10);
+ clk[ipu_di1_gate] = imx_clk_gate2("ipu_di1_gate", "ipu_di1_sel", MXC_CCM_CCGR6, 12);
+ clk[vpu_s] = imx_clk_mux("vpu_sel", MXC_CCM_CBCMR, 14, 2, vpu_sel, ARRAY_SIZE(vpu_sel));
+ clk[vpu_gate] = imx_clk_gate2("vpu_gate", "vpu_sel", MXC_CCM_CCGR5, 6);
+ clk[vpu_reference_gate] = imx_clk_gate2("vpu_reference_gate", "osc", MXC_CCM_CCGR5, 8);
+ clk[uart4_ipg_gate] = imx_clk_gate2("uart4_ipg_gate", "ipg", MXC_CCM_CCGR7, 8);
+ clk[uart4_per_gate] = imx_clk_gate2("uart4_per_gate", "uart_root", MXC_CCM_CCGR7, 10);
+ clk[uart5_ipg_gate] = imx_clk_gate2("uart5_ipg_gate", "ipg", MXC_CCM_CCGR7, 12);
+ clk[uart5_per_gate] = imx_clk_gate2("uart5_per_gate", "uart_root", MXC_CCM_CCGR7, 14);
+ clk[gpc_dvfs] = imx_clk_gate2("gpc_dvfs", "dummy", MXC_CCM_CCGR5, 24);
+
+ clk[ssi_apm] = imx_clk_mux("ssi_apm", MXC_CCM_CSCMR1, 8, 2, ssi_apm_sels, ARRAY_SIZE(ssi_apm_sels));
+ clk[ssi1_root_sel] = imx_clk_mux("ssi1_root_sel", MXC_CCM_CSCMR1, 14, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+ clk[ssi2_root_sel] = imx_clk_mux("ssi2_root_sel", MXC_CCM_CSCMR1, 12, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+ clk[ssi3_root_sel] = imx_clk_mux("ssi3_root_sel", MXC_CCM_CSCMR1, 11, 1, ssi3_clk_sels, ARRAY_SIZE(ssi3_clk_sels));
+ clk[ssi_ext1_sel] = imx_clk_mux("ssi_ext1_sel", MXC_CCM_CSCMR1, 28, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+ clk[ssi_ext2_sel] = imx_clk_mux("ssi_ext2_sel", MXC_CCM_CSCMR1, 30, 2, ssi_clk_sels, ARRAY_SIZE(ssi_clk_sels));
+ clk[ssi_ext1_com_sel] = imx_clk_mux("ssi_ext1_com_sel", MXC_CCM_CSCMR1, 0, 1, ssi_ext1_com_sels, ARRAY_SIZE(ssi_ext1_com_sels));
+ clk[ssi_ext2_com_sel] = imx_clk_mux("ssi_ext2_com_sel", MXC_CCM_CSCMR1, 1, 1, ssi_ext2_com_sels, ARRAY_SIZE(ssi_ext2_com_sels));
+ clk[ssi1_root_pred] = imx_clk_divider("ssi1_root_pred", "ssi1_root_sel", MXC_CCM_CS1CDR, 6, 3);
+ clk[ssi1_root_podf] = imx_clk_divider("ssi1_root_podf", "ssi1_root_pred", MXC_CCM_CS1CDR, 0, 6);
+ clk[ssi2_root_pred] = imx_clk_divider("ssi2_root_pred", "ssi2_root_sel", MXC_CCM_CS2CDR, 6, 3);
+ clk[ssi2_root_podf] = imx_clk_divider("ssi2_root_podf", "ssi2_root_pred", MXC_CCM_CS2CDR, 0, 6);
+ clk[ssi_ext1_pred] = imx_clk_divider("ssi_ext1_pred", "ssi_ext1_sel", MXC_CCM_CS1CDR, 22, 3);
+ clk[ssi_ext1_podf] = imx_clk_divider("ssi_ext1_podf", "ssi_ext1_pred", MXC_CCM_CS1CDR, 16, 6);
+ clk[ssi_ext2_pred] = imx_clk_divider("ssi_ext2_pred", "ssi_ext2_sel", MXC_CCM_CS2CDR, 22, 3);
+ clk[ssi_ext2_podf] = imx_clk_divider("ssi_ext2_podf", "ssi_ext2_pred", MXC_CCM_CS2CDR, 16, 6);
+ clk[ssi1_root_gate] = imx_clk_gate2("ssi1_root_gate", "ssi1_root_podf", MXC_CCM_CCGR3, 18);
+ clk[ssi2_root_gate] = imx_clk_gate2("ssi2_root_gate", "ssi2_root_podf", MXC_CCM_CCGR3, 22);
+ clk[ssi3_root_gate] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26);
+ clk[ssi_ext1_gate] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28);
+ clk[ssi_ext2_gate] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX5 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_ipg_gate], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[uart1_per_gate], "per", "imx21-uart.0");
+ clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0");
+ clk_register_clkdev(clk[uart2_per_gate], "per", "imx21-uart.1");
+ clk_register_clkdev(clk[uart2_ipg_gate], "ipg", "imx21-uart.1");
+ clk_register_clkdev(clk[uart3_per_gate], "per", "imx21-uart.2");
+ clk_register_clkdev(clk[uart3_ipg_gate], "ipg", "imx21-uart.2");
+ clk_register_clkdev(clk[uart4_per_gate], "per", "imx21-uart.3");
+ clk_register_clkdev(clk[uart4_ipg_gate], "ipg", "imx21-uart.3");
+ clk_register_clkdev(clk[uart5_per_gate], "per", "imx21-uart.4");
+ clk_register_clkdev(clk[uart5_ipg_gate], "ipg", "imx21-uart.4");
+ clk_register_clkdev(clk[ecspi1_per_gate], "per", "imx51-ecspi.0");
+ clk_register_clkdev(clk[ecspi1_ipg_gate], "ipg", "imx51-ecspi.0");
+ clk_register_clkdev(clk[ecspi2_per_gate], "per", "imx51-ecspi.1");
+ clk_register_clkdev(clk[ecspi2_ipg_gate], "ipg", "imx51-ecspi.1");
+ clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx51-cspi.0");
+ clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0");
+ clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1");
+ clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0");
+ clk_register_clkdev(clk[i2c2_gate], NULL, "imx-i2c.1");
+ clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.0");
+ clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.0");
+ clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.0");
+ clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.1");
+ clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.1");
+ clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.1");
+ clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
+ clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
+ clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
+ clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
+ clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
+ clk_register_clkdev(clk[nfc_gate], NULL, "mxc_nand");
+ clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
+ clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");
+ clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "imx-ssi.2");
+ clk_register_clkdev(clk[ssi_ext1_gate], "ssi_ext1", NULL);
+ clk_register_clkdev(clk[ssi_ext2_gate], "ssi_ext2", NULL);
+ clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma");
+ clk_register_clkdev(clk[cpu_podf], "cpu", NULL);
+ clk_register_clkdev(clk[iim_gate], "iim", NULL);
+ clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.0");
+ clk_register_clkdev(clk[dummy], NULL, "imx2-wdt.1");
+ clk_register_clkdev(clk[dummy], NULL, "imx-keypad");
+ clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0");
+ clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0");
+
+ /* Set SDHC parents to be PLL2 */
+ clk_set_parent(clk[esdhc_a_sel], clk[pll2_sw]);
+ clk_set_parent(clk[esdhc_b_sel], clk[pll2_sw]);
+
+ /* move usb phy clk to 24MHz */
+ clk_set_parent(clk[usb_phy_sel], clk[osc]);
+
+ clk_prepare_enable(clk[gpc_dvfs]);
+ clk_prepare_enable(clk[ahb_max]); /* esdhc3 */
+ clk_prepare_enable(clk[aips_tz1]);
+ clk_prepare_enable(clk[aips_tz2]); /* fec */
+ clk_prepare_enable(clk[spba]);
+ clk_prepare_enable(clk[emi_fast_gate]); /* fec */
+ clk_prepare_enable(clk[tmax1]);
+ clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */
+ clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */
+}
+
+int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
+ unsigned long rate_ckih1, unsigned long rate_ckih2)
+{
+ int i;
+
+ clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX51_DPLL1_BASE);
+ clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX51_DPLL2_BASE);
+ clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX51_DPLL3_BASE);
+ clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+ mx51_ipu_di0_sel, ARRAY_SIZE(mx51_ipu_di0_sel));
+ clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+ mx51_ipu_di1_sel, ARRAY_SIZE(mx51_ipu_di1_sel));
+ clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+ mx51_tve_ext_sel, ARRAY_SIZE(mx51_tve_ext_sel));
+ clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_sel", MXC_CCM_CCGR2, 30);
+ clk[tve_pred] = imx_clk_divider("tve_pred", "pll3_sw", MXC_CCM_CDCDR, 28, 3);
+ clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
+ clk[esdhc2_per_gate] = imx_clk_gate2("esdhc2_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 6);
+ clk[esdhc3_per_gate] = imx_clk_gate2("esdhc3_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 10);
+ clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
+ clk[usb_phy_gate] = imx_clk_gate2("usb_phy_gate", "usb_phy_sel", MXC_CCM_CCGR2, 0);
+ clk[hsi2c_gate] = imx_clk_gate2("hsi2c_gate", "ipg", MXC_CCM_CCGR1, 22);
+ clk[mipi_hsc1_gate] = imx_clk_gate2("mipi_hsc1_gate", "ipg", MXC_CCM_CCGR4, 6);
+ clk[mipi_hsc2_gate] = imx_clk_gate2("mipi_hsc2_gate", "ipg", MXC_CCM_CCGR4, 8);
+ clk[mipi_esc_gate] = imx_clk_gate2("mipi_esc_gate", "ipg", MXC_CCM_CCGR4, 10);
+ clk[mipi_hsp_gate] = imx_clk_gate2("mipi_hsp_gate", "ipg", MXC_CCM_CCGR4, 12);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX51 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+
+ clk_register_clkdev(clk[hsi2c_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL);
+ clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0");
+ clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0");
+ clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL);
+ clk_register_clkdev(clk[ipu_gate], "bus", "imx51-ipu");
+ clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx51-ipu");
+ clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx51-ipu");
+ clk_register_clkdev(clk[ipu_gate], "hsp", "imx51-ipu");
+ clk_register_clkdev(clk[usb_phy_gate], "phy", "mxc-ehci.0");
+ clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx51.0");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.0");
+ clk_register_clkdev(clk[esdhc1_per_gate], "per", "sdhci-esdhc-imx51.0");
+ clk_register_clkdev(clk[esdhc2_ipg_gate], "ipg", "sdhci-esdhc-imx51.1");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.1");
+ clk_register_clkdev(clk[esdhc2_per_gate], "per", "sdhci-esdhc-imx51.1");
+ clk_register_clkdev(clk[esdhc3_ipg_gate], "ipg", "sdhci-esdhc-imx51.2");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.2");
+ clk_register_clkdev(clk[esdhc3_per_gate], "per", "sdhci-esdhc-imx51.2");
+ clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx51.3");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx51.3");
+ clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx51.3");
+ clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi");
+ clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi");
+ clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi");
+
+ /* set the usboh3 parent to pll2_sw */
+ clk_set_parent(clk[usboh3_sel], clk[pll2_sw]);
+
+ /* set SDHC root clock to 166.25MHZ*/
+ clk_set_rate(clk[esdhc_a_podf], 166250000);
+ clk_set_rate(clk[esdhc_b_podf], 166250000);
+
+ /* System timer */
+ mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
+ MX51_INT_GPT);
+
+ clk_prepare_enable(clk[iim_gate]);
+ imx_print_silicon_rev("i.MX51", mx51_revision());
+ clk_disable_unprepare(clk[iim_gate]);
+
+ return 0;
+}
+
+int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc,
+ unsigned long rate_ckih1, unsigned long rate_ckih2)
+{
+ int i;
+ unsigned long r;
+
+ clk[pll1_sw] = imx_clk_pllv2("pll1_sw", "osc", MX53_DPLL1_BASE);
+ clk[pll2_sw] = imx_clk_pllv2("pll2_sw", "osc", MX53_DPLL2_BASE);
+ clk[pll3_sw] = imx_clk_pllv2("pll3_sw", "osc", MX53_DPLL3_BASE);
+ clk[pll4_sw] = imx_clk_pllv2("pll4_sw", "osc", MX53_DPLL4_BASE);
+
+ clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", MXC_CCM_CSCMR2, 9, 1,
+ mx53_ldb_di1_sel, ARRAY_SIZE(mx53_ldb_di1_sel));
+ clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+ clk[ldb_di1_div] = imx_clk_divider("ldb_di1_div", "ldb_di1_div_3_5", MXC_CCM_CSCMR2, 11, 1);
+ clk[di_pll4_podf] = imx_clk_divider("di_pll4_podf", "pll4_sw", MXC_CCM_CDCDR, 16, 3);
+ clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", MXC_CCM_CSCMR2, 8, 1,
+ mx53_ldb_di0_sel, ARRAY_SIZE(mx53_ldb_di0_sel));
+ clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+ clk[ldb_di0_div] = imx_clk_divider("ldb_di0_div", "ldb_di0_div_3_5", MXC_CCM_CSCMR2, 10, 1);
+ clk[ldb_di0_gate] = imx_clk_gate2("ldb_di0_gate", "ldb_di0_div", MXC_CCM_CCGR6, 28);
+ clk[ldb_di1_gate] = imx_clk_gate2("ldb_di1_gate", "ldb_di1_div", MXC_CCM_CCGR6, 30);
+ clk[ipu_di0_sel] = imx_clk_mux("ipu_di0_sel", MXC_CCM_CSCMR2, 26, 3,
+ mx53_ipu_di0_sel, ARRAY_SIZE(mx53_ipu_di0_sel));
+ clk[ipu_di1_sel] = imx_clk_mux("ipu_di1_sel", MXC_CCM_CSCMR2, 29, 3,
+ mx53_ipu_di1_sel, ARRAY_SIZE(mx53_ipu_di1_sel));
+ clk[tve_ext_sel] = imx_clk_mux("tve_ext_sel", MXC_CCM_CSCMR1, 6, 1,
+ mx53_tve_ext_sel, ARRAY_SIZE(mx53_tve_ext_sel));
+ clk[tve_gate] = imx_clk_gate2("tve_gate", "tve_pred", MXC_CCM_CCGR2, 30);
+ clk[tve_pred] = imx_clk_divider("tve_pred", "tve_ext_sel", MXC_CCM_CDCDR, 28, 3);
+ clk[esdhc1_per_gate] = imx_clk_gate2("esdhc1_per_gate", "esdhc_a_podf", MXC_CCM_CCGR3, 2);
+ clk[esdhc2_per_gate] = imx_clk_gate2("esdhc2_per_gate", "esdhc_c_sel", MXC_CCM_CCGR3, 6);
+ clk[esdhc3_per_gate] = imx_clk_gate2("esdhc3_per_gate", "esdhc_b_podf", MXC_CCM_CCGR3, 10);
+ clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14);
+ clk[usb_phy1_gate] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10);
+ clk[usb_phy2_gate] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12);
+ clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "ipg", MXC_CCM_CCGR4, 6);
+ clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 8);
+ clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX53 clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ mx5_clocks_common_init(rate_ckil, rate_osc, rate_ckih1, rate_ckih2);
+
+ clk_register_clkdev(clk[vpu_gate], NULL, "imx53-vpu.0");
+ clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2");
+ clk_register_clkdev(clk[fec_gate], NULL, "imx25-fec.0");
+ clk_register_clkdev(clk[ipu_gate], "bus", "imx53-ipu");
+ clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx53-ipu");
+ clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx53-ipu");
+ clk_register_clkdev(clk[ipu_gate], "hsp", "imx53-ipu");
+ clk_register_clkdev(clk[usb_phy1_gate], "usb_phy1", "mxc-ehci.0");
+ clk_register_clkdev(clk[esdhc1_ipg_gate], "ipg", "sdhci-esdhc-imx53.0");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.0");
+ clk_register_clkdev(clk[esdhc1_per_gate], "per", "sdhci-esdhc-imx53.0");
+ clk_register_clkdev(clk[esdhc2_ipg_gate], "ipg", "sdhci-esdhc-imx53.1");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.1");
+ clk_register_clkdev(clk[esdhc2_per_gate], "per", "sdhci-esdhc-imx53.1");
+ clk_register_clkdev(clk[esdhc3_ipg_gate], "ipg", "sdhci-esdhc-imx53.2");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.2");
+ clk_register_clkdev(clk[esdhc3_per_gate], "per", "sdhci-esdhc-imx53.2");
+ clk_register_clkdev(clk[esdhc4_ipg_gate], "ipg", "sdhci-esdhc-imx53.3");
+ clk_register_clkdev(clk[dummy], "ahb", "sdhci-esdhc-imx53.3");
+ clk_register_clkdev(clk[esdhc4_per_gate], "per", "sdhci-esdhc-imx53.3");
+ clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi");
+ clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi");
+ clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi");
+
+ /* set SDHC root clock to 200MHZ*/
+ clk_set_rate(clk[esdhc_a_podf], 200000000);
+ clk_set_rate(clk[esdhc_b_podf], 200000000);
+
+ /* System timer */
+ mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
+ MX53_INT_GPT);
+
+ clk_prepare_enable(clk[iim_gate]);
+ imx_print_silicon_rev("i.MX53", mx53_revision());
+ clk_disable_unprepare(clk[iim_gate]);
+
+ r = clk_round_rate(clk[usboh3_per_gate], 54000000);
+ clk_set_rate(clk[usboh3_per_gate], r);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
+ unsigned long *ckih1, unsigned long *ckih2)
+{
+ struct device_node *np;
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx-ckil"))
+ *ckil = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-osc"))
+ *osc = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+ *ckih1 = rate;
+ else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
+ *ckih2 = rate;
+ }
+}
+
+int __init mx51_clocks_init_dt(void)
+{
+ unsigned long ckil, osc, ckih1, ckih2;
+
+ clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+ return mx51_clocks_init(ckil, osc, ckih1, ckih2);
+}
+
+int __init mx53_clocks_init_dt(void)
+{
+ unsigned long ckil, osc, ckih1, ckih2;
+
+ clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
+ return mx53_clocks_init(ckil, osc, ckih1, ckih2);
+}
+#endif
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
new file mode 100644
index 000000000000..cab02d0a15d6
--- /dev/null
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -0,0 +1,444 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <mach/common.h>
+#include "clk.h"
+
+#define CCGR0 0x68
+#define CCGR1 0x6c
+#define CCGR2 0x70
+#define CCGR3 0x74
+#define CCGR4 0x78
+#define CCGR5 0x7c
+#define CCGR6 0x80
+#define CCGR7 0x84
+
+#define CLPCR 0x54
+#define BP_CLPCR_LPM 0
+#define BM_CLPCR_LPM (0x3 << 0)
+#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
+#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
+#define BM_CLPCR_SBYOS (0x1 << 6)
+#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
+#define BM_CLPCR_VSTBY (0x1 << 8)
+#define BP_CLPCR_STBY_COUNT 9
+#define BM_CLPCR_STBY_COUNT (0x3 << 9)
+#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
+#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
+#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
+#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
+#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
+#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
+#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
+#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
+#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
+#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
+#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
+
+static void __iomem *ccm_base;
+
+void __init imx6q_clock_map_io(void) { }
+
+int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
+{
+ u32 val = readl_relaxed(ccm_base + CLPCR);
+
+ val &= ~BM_CLPCR_LPM;
+ switch (mode) {
+ case WAIT_CLOCKED:
+ break;
+ case WAIT_UNCLOCKED:
+ val |= 0x1 << BP_CLPCR_LPM;
+ break;
+ case STOP_POWER_ON:
+ val |= 0x2 << BP_CLPCR_LPM;
+ break;
+ case WAIT_UNCLOCKED_POWER_OFF:
+ val |= 0x1 << BP_CLPCR_LPM;
+ val &= ~BM_CLPCR_VSTBY;
+ val &= ~BM_CLPCR_SBYOS;
+ break;
+ case STOP_POWER_OFF:
+ val |= 0x2 << BP_CLPCR_LPM;
+ val |= 0x3 << BP_CLPCR_STBY_COUNT;
+ val |= BM_CLPCR_VSTBY;
+ val |= BM_CLPCR_SBYOS;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ writel_relaxed(val, ccm_base + CLPCR);
+
+ return 0;
+}
+
+static const char *step_sels[] = { "osc", "pll2_pfd2_396m", };
+static const char *pll1_sw_sels[] = { "pll1_sys", "step", };
+static const char *periph_pre_sels[] = { "pll2_bus", "pll2_pfd2_396m", "pll2_pfd0_352m", "pll2_198m", };
+static const char *periph_clk2_sels[] = { "pll3_usb_otg", "osc", };
+static const char *periph_sels[] = { "periph_pre", "periph_clk2", };
+static const char *periph2_sels[] = { "periph2_pre", "periph2_clk2", };
+static const char *axi_sels[] = { "periph", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *audio_sels[] = { "pll4_audio", "pll3_pfd2_508m", "pll3_pfd3_454m", "pll3_usb_otg", };
+static const char *gpu_axi_sels[] = { "axi", "ahb", };
+static const char *gpu2d_core_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd0_352m", "pll2_pfd2_396m", };
+static const char *gpu3d_core_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd2_396m", };
+static const char *gpu3d_shader_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll2_pfd1_594m", "pll2_pfd9_720m", };
+static const char *ipu_sels[] = { "mmdc_ch0_axi", "pll2_pfd2_396m", "pll3_120m", "pll3_pfd1_540m", };
+static const char *ldb_di_sels[] = { "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *ipu_di_pre_sels[] = { "mmdc_ch0_axi", "pll3_usb_otg", "pll5_video", "pll2_pfd0_352m", "pll2_pfd2_396m", "pll3_pfd1_540m", };
+static const char *ipu1_di0_sels[] = { "ipu1_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu1_di1_sels[] = { "ipu1_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu2_di0_sels[] = { "ipu2_di0_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *ipu2_di1_sels[] = { "ipu2_di1_pre", "dummy", "dummy", "ldb_di0", "ldb_di1", };
+static const char *hsi_tx_sels[] = { "pll3_120m", "pll2_pfd2_396m", };
+static const char *pcie_axi_sels[] = { "axi", "ahb", };
+static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio", };
+static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
+static const char *emi_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *vdo_axi_sels[] = { "axi", "ahb", };
+static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video",
+ "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
+ "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
+
+static const char * const clks_init_on[] __initconst = {
+ "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
+};
+
+enum mx6q_clks {
+ dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
+ pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
+ pll2_198m, pll3_120m, pll3_80m, pll3_60m, twd, step, pll1_sw,
+ periph_pre, periph2_pre, periph_clk2_sel, periph2_clk2_sel, axi_sel,
+ esai_sel, asrc_sel, spdif_sel, gpu2d_axi, gpu3d_axi, gpu2d_core_sel,
+ gpu3d_core_sel, gpu3d_shader_sel, ipu1_sel, ipu2_sel, ldb_di0_sel,
+ ldb_di1_sel, ipu1_di0_pre_sel, ipu1_di1_pre_sel, ipu2_di0_pre_sel,
+ ipu2_di1_pre_sel, ipu1_di0_sel, ipu1_di1_sel, ipu2_di0_sel,
+ ipu2_di1_sel, hsi_tx_sel, pcie_axi_sel, ssi1_sel, ssi2_sel, ssi3_sel,
+ usdhc1_sel, usdhc2_sel, usdhc3_sel, usdhc4_sel, enfc_sel, emi_sel,
+ emi_slow_sel, vdo_axi_sel, vpu_axi_sel, cko1_sel, periph, periph2,
+ periph_clk2, periph2_clk2, ipg, ipg_per, esai_pred, esai_podf,
+ asrc_pred, asrc_podf, spdif_pred, spdif_podf, can_root, ecspi_root,
+ gpu2d_core_podf, gpu3d_core_podf, gpu3d_shader, ipu1_podf, ipu2_podf,
+ ldb_di0_podf, ldb_di1_podf, ipu1_di0_pre, ipu1_di1_pre, ipu2_di0_pre,
+ ipu2_di1_pre, hsi_tx_podf, ssi1_pred, ssi1_podf, ssi2_pred, ssi2_podf,
+ ssi3_pred, ssi3_podf, uart_serial_podf, usdhc1_podf, usdhc2_podf,
+ usdhc3_podf, usdhc4_podf, enfc_pred, enfc_podf, emi_podf,
+ emi_slow_podf, vpu_axi_podf, cko1_podf, axi, mmdc_ch0_axi_podf,
+ mmdc_ch1_axi_podf, arm, ahb, apbh_dma, asrc, can1_ipg, can1_serial,
+ can2_ipg, can2_serial, ecspi1, ecspi2, ecspi3, ecspi4, ecspi5, enet,
+ esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb,
+ hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2,
+ ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi,
+ mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4,
+ gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1,
+ ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
+ usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
+ pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
+ ssi2_ipg, ssi3_ipg, clk_max
+};
+
+static struct clk *clk[clk_max];
+
+int __init mx6q_clocks_init(void)
+{
+ struct device_node *np;
+ void __iomem *base;
+ struct clk *c;
+ int i, irq;
+
+ clk[dummy] = imx_clk_fixed("dummy", 0);
+
+ /* retrieve the freqency of fixed clocks from device tree */
+ for_each_compatible_node(np, NULL, "fixed-clock") {
+ u32 rate;
+ if (of_property_read_u32(np, "clock-frequency", &rate))
+ continue;
+
+ if (of_device_is_compatible(np, "fsl,imx-ckil"))
+ clk[ckil] = imx_clk_fixed("ckil", rate);
+ else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
+ clk[ckih] = imx_clk_fixed("ckih", rate);
+ else if (of_device_is_compatible(np, "fsl,imx-osc"))
+ clk[osc] = imx_clk_fixed("osc", rate);
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+
+ /* type name parent_name base gate_mask div_mask */
+ clk[pll1_sys] = imx_clk_pllv3(IMX_PLLV3_SYS, "pll1_sys", "osc", base, 0x2000, 0x7f);
+ clk[pll2_bus] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2_bus", "osc", base + 0x30, 0x2000, 0x1);
+ clk[pll3_usb_otg] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3_usb_otg", "osc", base + 0x10, 0x2000, 0x3);
+ clk[pll4_audio] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4_audio", "osc", base + 0x70, 0x2000, 0x7f);
+ clk[pll5_video] = imx_clk_pllv3(IMX_PLLV3_AV, "pll5_video", "osc", base + 0xa0, 0x2000, 0x7f);
+ clk[pll6_mlb] = imx_clk_pllv3(IMX_PLLV3_MLB, "pll6_mlb", "osc", base + 0xd0, 0x2000, 0x0);
+ clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x2000, 0x3);
+ clk[pll8_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll8_enet", "osc", base + 0xe0, 0x182000, 0x3);
+
+ /* name parent_name reg idx */
+ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0);
+ clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1);
+ clk[pll2_pfd2_396m] = imx_clk_pfd("pll2_pfd2_396m", "pll2_bus", base + 0x100, 2);
+ clk[pll3_pfd0_720m] = imx_clk_pfd("pll3_pfd0_720m", "pll3_usb_otg", base + 0xf0, 0);
+ clk[pll3_pfd1_540m] = imx_clk_pfd("pll3_pfd1_540m", "pll3_usb_otg", base + 0xf0, 1);
+ clk[pll3_pfd2_508m] = imx_clk_pfd("pll3_pfd2_508m", "pll3_usb_otg", base + 0xf0, 2);
+ clk[pll3_pfd3_454m] = imx_clk_pfd("pll3_pfd3_454m", "pll3_usb_otg", base + 0xf0, 3);
+
+ /* name parent_name mult div */
+ clk[pll2_198m] = imx_clk_fixed_factor("pll2_198m", "pll2_pfd2_396m", 1, 2);
+ clk[pll3_120m] = imx_clk_fixed_factor("pll3_120m", "pll3_usb_otg", 1, 4);
+ clk[pll3_80m] = imx_clk_fixed_factor("pll3_80m", "pll3_usb_otg", 1, 6);
+ clk[pll3_60m] = imx_clk_fixed_factor("pll3_60m", "pll3_usb_otg", 1, 8);
+ clk[twd] = imx_clk_fixed_factor("twd", "arm", 1, 2);
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-ccm");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ ccm_base = base;
+
+ /* name reg shift width parent_names num_parents */
+ clk[step] = imx_clk_mux("step", base + 0xc, 8, 1, step_sels, ARRAY_SIZE(step_sels));
+ clk[pll1_sw] = imx_clk_mux("pll1_sw", base + 0xc, 2, 1, pll1_sw_sels, ARRAY_SIZE(pll1_sw_sels));
+ clk[periph_pre] = imx_clk_mux("periph_pre", base + 0x18, 18, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clk[periph2_pre] = imx_clk_mux("periph2_pre", base + 0x18, 21, 2, periph_pre_sels, ARRAY_SIZE(periph_pre_sels));
+ clk[periph_clk2_sel] = imx_clk_mux("periph_clk2_sel", base + 0x18, 12, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[periph2_clk2_sel] = imx_clk_mux("periph2_clk2_sel", base + 0x18, 20, 1, periph_clk2_sels, ARRAY_SIZE(periph_clk2_sels));
+ clk[axi_sel] = imx_clk_mux("axi_sel", base + 0x14, 6, 2, axi_sels, ARRAY_SIZE(axi_sels));
+ clk[esai_sel] = imx_clk_mux("esai_sel", base + 0x20, 19, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[asrc_sel] = imx_clk_mux("asrc_sel", base + 0x30, 7, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[spdif_sel] = imx_clk_mux("spdif_sel", base + 0x30, 20, 2, audio_sels, ARRAY_SIZE(audio_sels));
+ clk[gpu2d_axi] = imx_clk_mux("gpu2d_axi", base + 0x18, 0, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[gpu3d_axi] = imx_clk_mux("gpu3d_axi", base + 0x18, 1, 1, gpu_axi_sels, ARRAY_SIZE(gpu_axi_sels));
+ clk[gpu2d_core_sel] = imx_clk_mux("gpu2d_core_sel", base + 0x18, 16, 2, gpu2d_core_sels, ARRAY_SIZE(gpu2d_core_sels));
+ clk[gpu3d_core_sel] = imx_clk_mux("gpu3d_core_sel", base + 0x18, 4, 2, gpu3d_core_sels, ARRAY_SIZE(gpu3d_core_sels));
+ clk[gpu3d_shader_sel] = imx_clk_mux("gpu3d_shader_sel", base + 0x18, 8, 2, gpu3d_shader_sels, ARRAY_SIZE(gpu3d_shader_sels));
+ clk[ipu1_sel] = imx_clk_mux("ipu1_sel", base + 0x3c, 9, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+ clk[ipu2_sel] = imx_clk_mux("ipu2_sel", base + 0x3c, 14, 2, ipu_sels, ARRAY_SIZE(ipu_sels));
+ clk[ldb_di0_sel] = imx_clk_mux("ldb_di0_sel", base + 0x2c, 9, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
+ clk[ldb_di1_sel] = imx_clk_mux("ldb_di1_sel", base + 0x2c, 12, 3, ldb_di_sels, ARRAY_SIZE(ldb_di_sels));
+ clk[ipu1_di0_pre_sel] = imx_clk_mux("ipu1_di0_pre_sel", base + 0x34, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
+ clk[ipu1_di1_pre_sel] = imx_clk_mux("ipu1_di1_pre_sel", base + 0x34, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
+ clk[ipu2_di0_pre_sel] = imx_clk_mux("ipu2_di0_pre_sel", base + 0x38, 6, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
+ clk[ipu2_di1_pre_sel] = imx_clk_mux("ipu2_di1_pre_sel", base + 0x38, 15, 3, ipu_di_pre_sels, ARRAY_SIZE(ipu_di_pre_sels));
+ clk[ipu1_di0_sel] = imx_clk_mux("ipu1_di0_sel", base + 0x34, 0, 3, ipu1_di0_sels, ARRAY_SIZE(ipu1_di0_sels));
+ clk[ipu1_di1_sel] = imx_clk_mux("ipu1_di1_sel", base + 0x34, 9, 3, ipu1_di1_sels, ARRAY_SIZE(ipu1_di1_sels));
+ clk[ipu2_di0_sel] = imx_clk_mux("ipu2_di0_sel", base + 0x38, 0, 3, ipu2_di0_sels, ARRAY_SIZE(ipu2_di0_sels));
+ clk[ipu2_di1_sel] = imx_clk_mux("ipu2_di1_sel", base + 0x38, 9, 3, ipu2_di1_sels, ARRAY_SIZE(ipu2_di1_sels));
+ clk[hsi_tx_sel] = imx_clk_mux("hsi_tx_sel", base + 0x30, 28, 1, hsi_tx_sels, ARRAY_SIZE(hsi_tx_sels));
+ clk[pcie_axi_sel] = imx_clk_mux("pcie_axi_sel", base + 0x18, 10, 1, pcie_axi_sels, ARRAY_SIZE(pcie_axi_sels));
+ clk[ssi1_sel] = imx_clk_mux("ssi1_sel", base + 0x1c, 10, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clk[ssi2_sel] = imx_clk_mux("ssi2_sel", base + 0x1c, 12, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clk[ssi3_sel] = imx_clk_mux("ssi3_sel", base + 0x1c, 14, 2, ssi_sels, ARRAY_SIZE(ssi_sels));
+ clk[usdhc1_sel] = imx_clk_mux("usdhc1_sel", base + 0x1c, 16, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[usdhc2_sel] = imx_clk_mux("usdhc2_sel", base + 0x1c, 17, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[usdhc3_sel] = imx_clk_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[usdhc4_sel] = imx_clk_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels));
+ clk[enfc_sel] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
+ clk[emi_sel] = imx_clk_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels));
+ clk[emi_slow_sel] = imx_clk_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_sels, ARRAY_SIZE(emi_sels));
+ clk[vdo_axi_sel] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
+ clk[vpu_axi_sel] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
+ clk[cko1_sel] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
+
+ /* name reg shift width busy: reg, shift parent_names num_parents */
+ clk[periph] = imx_clk_busy_mux("periph", base + 0x14, 25, 1, base + 0x48, 5, periph_sels, ARRAY_SIZE(periph_sels));
+ clk[periph2] = imx_clk_busy_mux("periph2", base + 0x14, 26, 1, base + 0x48, 3, periph2_sels, ARRAY_SIZE(periph2_sels));
+
+ /* name parent_name reg shift width */
+ clk[periph_clk2] = imx_clk_divider("periph_clk2", "periph_clk2_sel", base + 0x14, 27, 3);
+ clk[periph2_clk2] = imx_clk_divider("periph2_clk2", "periph2_clk2_sel", base + 0x14, 0, 3);
+ clk[ipg] = imx_clk_divider("ipg", "ahb", base + 0x14, 8, 2);
+ clk[ipg_per] = imx_clk_divider("ipg_per", "ipg", base + 0x1c, 0, 6);
+ clk[esai_pred] = imx_clk_divider("esai_pred", "esai_sel", base + 0x28, 9, 3);
+ clk[esai_podf] = imx_clk_divider("esai_podf", "esai_pred", base + 0x28, 25, 3);
+ clk[asrc_pred] = imx_clk_divider("asrc_pred", "asrc_sel", base + 0x30, 12, 3);
+ clk[asrc_podf] = imx_clk_divider("asrc_podf", "asrc_pred", base + 0x30, 9, 3);
+ clk[spdif_pred] = imx_clk_divider("spdif_pred", "spdif_sel", base + 0x30, 25, 3);
+ clk[spdif_podf] = imx_clk_divider("spdif_podf", "spdif_pred", base + 0x30, 22, 3);
+ clk[can_root] = imx_clk_divider("can_root", "pll3_usb_otg", base + 0x20, 2, 6);
+ clk[ecspi_root] = imx_clk_divider("ecspi_root", "pll3_60m", base + 0x38, 19, 6);
+ clk[gpu2d_core_podf] = imx_clk_divider("gpu2d_core_podf", "gpu2d_core_sel", base + 0x18, 23, 3);
+ clk[gpu3d_core_podf] = imx_clk_divider("gpu3d_core_podf", "gpu3d_core_sel", base + 0x18, 26, 3);
+ clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3);
+ clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3);
+ clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3);
+ clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1);
+ clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1);
+ clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3);
+ clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3);
+ clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3);
+ clk[ipu2_di1_pre] = imx_clk_divider("ipu2_di1_pre", "ipu2_di1_pre_sel", base + 0x38, 12, 3);
+ clk[hsi_tx_podf] = imx_clk_divider("hsi_tx_podf", "hsi_tx_sel", base + 0x30, 29, 3);
+ clk[ssi1_pred] = imx_clk_divider("ssi1_pred", "ssi1_sel", base + 0x28, 6, 3);
+ clk[ssi1_podf] = imx_clk_divider("ssi1_podf", "ssi1_pred", base + 0x28, 0, 6);
+ clk[ssi2_pred] = imx_clk_divider("ssi2_pred", "ssi2_sel", base + 0x2c, 6, 3);
+ clk[ssi2_podf] = imx_clk_divider("ssi2_podf", "ssi2_pred", base + 0x2c, 0, 6);
+ clk[ssi3_pred] = imx_clk_divider("ssi3_pred", "ssi3_sel", base + 0x28, 22, 3);
+ clk[ssi3_podf] = imx_clk_divider("ssi3_podf", "ssi3_pred", base + 0x28, 16, 6);
+ clk[uart_serial_podf] = imx_clk_divider("uart_serial_podf", "pll3_80m", base + 0x24, 0, 6);
+ clk[usdhc1_podf] = imx_clk_divider("usdhc1_podf", "usdhc1_sel", base + 0x24, 11, 3);
+ clk[usdhc2_podf] = imx_clk_divider("usdhc2_podf", "usdhc2_sel", base + 0x24, 16, 3);
+ clk[usdhc3_podf] = imx_clk_divider("usdhc3_podf", "usdhc3_sel", base + 0x24, 19, 3);
+ clk[usdhc4_podf] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
+ clk[enfc_pred] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
+ clk[enfc_podf] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
+ clk[emi_podf] = imx_clk_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3);
+ clk[emi_slow_podf] = imx_clk_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3);
+ clk[vpu_axi_podf] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
+ clk[cko1_podf] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
+
+ /* name parent_name reg shift width busy: reg, shift */
+ clk[axi] = imx_clk_busy_divider("axi", "axi_sel", base + 0x14, 16, 3, base + 0x48, 0);
+ clk[mmdc_ch0_axi_podf] = imx_clk_busy_divider("mmdc_ch0_axi_podf", "periph", base + 0x14, 19, 3, base + 0x48, 4);
+ clk[mmdc_ch1_axi_podf] = imx_clk_busy_divider("mmdc_ch1_axi_podf", "periph2", base + 0x14, 3, 3, base + 0x48, 2);
+ clk[arm] = imx_clk_busy_divider("arm", "pll1_sw", base + 0x10, 0, 3, base + 0x48, 16);
+ clk[ahb] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1);
+
+ /* name parent_name reg shift */
+ clk[apbh_dma] = imx_clk_gate2("apbh_dma", "ahb", base + 0x68, 4);
+ clk[asrc] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6);
+ clk[can1_ipg] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14);
+ clk[can1_serial] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16);
+ clk[can2_ipg] = imx_clk_gate2("can2_ipg", "ipg", base + 0x68, 18);
+ clk[can2_serial] = imx_clk_gate2("can2_serial", "can_root", base + 0x68, 20);
+ clk[ecspi1] = imx_clk_gate2("ecspi1", "ecspi_root", base + 0x6c, 0);
+ clk[ecspi2] = imx_clk_gate2("ecspi2", "ecspi_root", base + 0x6c, 2);
+ clk[ecspi3] = imx_clk_gate2("ecspi3", "ecspi_root", base + 0x6c, 4);
+ clk[ecspi4] = imx_clk_gate2("ecspi4", "ecspi_root", base + 0x6c, 6);
+ clk[ecspi5] = imx_clk_gate2("ecspi5", "ecspi_root", base + 0x6c, 8);
+ clk[enet] = imx_clk_gate2("enet", "ipg", base + 0x6c, 10);
+ clk[esai] = imx_clk_gate2("esai", "esai_podf", base + 0x6c, 16);
+ clk[gpt_ipg] = imx_clk_gate2("gpt_ipg", "ipg", base + 0x6c, 20);
+ clk[gpt_ipg_per] = imx_clk_gate2("gpt_ipg_per", "ipg_per", base + 0x6c, 22);
+ clk[gpu2d_core] = imx_clk_gate2("gpu2d_core", "gpu2d_core_podf", base + 0x6c, 24);
+ clk[gpu3d_core] = imx_clk_gate2("gpu3d_core", "gpu3d_core_podf", base + 0x6c, 26);
+ clk[hdmi_iahb] = imx_clk_gate2("hdmi_iahb", "ahb", base + 0x70, 0);
+ clk[hdmi_isfr] = imx_clk_gate2("hdmi_isfr", "pll3_pfd1_540m", base + 0x70, 4);
+ clk[i2c1] = imx_clk_gate2("i2c1", "ipg_per", base + 0x70, 6);
+ clk[i2c2] = imx_clk_gate2("i2c2", "ipg_per", base + 0x70, 8);
+ clk[i2c3] = imx_clk_gate2("i2c3", "ipg_per", base + 0x70, 10);
+ clk[iim] = imx_clk_gate2("iim", "ipg", base + 0x70, 12);
+ clk[enfc] = imx_clk_gate2("enfc", "enfc_podf", base + 0x70, 14);
+ clk[ipu1] = imx_clk_gate2("ipu1", "ipu1_podf", base + 0x74, 0);
+ clk[ipu1_di0] = imx_clk_gate2("ipu1_di0", "ipu1_di0_sel", base + 0x74, 2);
+ clk[ipu1_di1] = imx_clk_gate2("ipu1_di1", "ipu1_di1_sel", base + 0x74, 4);
+ clk[ipu2] = imx_clk_gate2("ipu2", "ipu2_podf", base + 0x74, 6);
+ clk[ipu2_di0] = imx_clk_gate2("ipu2_di0", "ipu2_di0_sel", base + 0x74, 8);
+ clk[ldb_di0] = imx_clk_gate2("ldb_di0", "ldb_di0_podf", base + 0x74, 12);
+ clk[ldb_di1] = imx_clk_gate2("ldb_di1", "ldb_di1_podf", base + 0x74, 14);
+ clk[ipu2_di1] = imx_clk_gate2("ipu2_di1", "ipu2_di1_sel", base + 0x74, 10);
+ clk[hsi_tx] = imx_clk_gate2("hsi_tx", "hsi_tx_podf", base + 0x74, 16);
+ clk[mlb] = imx_clk_gate2("mlb", "pll6_mlb", base + 0x74, 18);
+ clk[mmdc_ch0_axi] = imx_clk_gate2("mmdc_ch0_axi", "mmdc_ch0_axi_podf", base + 0x74, 20);
+ clk[mmdc_ch1_axi] = imx_clk_gate2("mmdc_ch1_axi", "mmdc_ch1_axi_podf", base + 0x74, 22);
+ clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28);
+ clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30);
+ clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0);
+ clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16);
+ clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18);
+ clk[pwm3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20);
+ clk[pwm4] = imx_clk_gate2("pwm4", "ipg_per", base + 0x78, 22);
+ clk[gpmi_bch_apb] = imx_clk_gate2("gpmi_bch_apb", "usdhc3", base + 0x78, 24);
+ clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
+ clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
+ clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+ clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
+ clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
+ clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
+ clk[ssi1_ipg] = imx_clk_gate2("ssi1_ipg", "ipg", base + 0x7c, 18);
+ clk[ssi2_ipg] = imx_clk_gate2("ssi2_ipg", "ipg", base + 0x7c, 20);
+ clk[ssi3_ipg] = imx_clk_gate2("ssi3_ipg", "ipg", base + 0x7c, 22);
+ clk[uart_ipg] = imx_clk_gate2("uart_ipg", "ipg", base + 0x7c, 24);
+ clk[uart_serial] = imx_clk_gate2("uart_serial", "uart_serial_podf", base + 0x7c, 26);
+ clk[usboh3] = imx_clk_gate2("usboh3", "ipg", base + 0x80, 0);
+ clk[usdhc1] = imx_clk_gate2("usdhc1", "usdhc1_podf", base + 0x80, 2);
+ clk[usdhc2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
+ clk[usdhc3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
+ clk[usdhc4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
+ clk[vdo_axi] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
+ clk[vpu_axi] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
+ clk[cko1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
+
+ for (i = 0; i < ARRAY_SIZE(clk); i++)
+ if (IS_ERR(clk[i]))
+ pr_err("i.MX6q clk %d: register failed with %ld\n",
+ i, PTR_ERR(clk[i]));
+
+ clk_register_clkdev(clk[mmdc_ch0_axi], NULL, "mmdc_ch0_axi");
+ clk_register_clkdev(clk[mmdc_ch1_axi], NULL, "mmdc_ch1_axi");
+ clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0");
+ clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0");
+ clk_register_clkdev(clk[twd], NULL, "smp_twd");
+ clk_register_clkdev(clk[usboh3], NULL, "usboh3");
+ clk_register_clkdev(clk[uart_serial], "per", "2020000.serial");
+ clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial");
+ clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial");
+ clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial");
+ clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial");
+ clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial");
+ clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial");
+ clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial");
+ clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial");
+ clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial");
+ clk_register_clkdev(clk[enet], NULL, "2188000.ethernet");
+ clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc");
+ clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc");
+ clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc");
+ clk_register_clkdev(clk[usdhc4], NULL, "219c000.usdhc");
+ clk_register_clkdev(clk[i2c1], NULL, "21a0000.i2c");
+ clk_register_clkdev(clk[i2c2], NULL, "21a4000.i2c");
+ clk_register_clkdev(clk[i2c3], NULL, "21a8000.i2c");
+ clk_register_clkdev(clk[ecspi1], NULL, "2008000.ecspi");
+ clk_register_clkdev(clk[ecspi2], NULL, "200c000.ecspi");
+ clk_register_clkdev(clk[ecspi3], NULL, "2010000.ecspi");
+ clk_register_clkdev(clk[ecspi4], NULL, "2014000.ecspi");
+ clk_register_clkdev(clk[ecspi5], NULL, "2018000.ecspi");
+ clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma");
+ clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog");
+ clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog");
+ clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi");
+ clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL);
+ clk_register_clkdev(clk[ahb], "ahb", NULL);
+ clk_register_clkdev(clk[cko1], "cko1", NULL);
+
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
+ c = clk_get_sys(clks_init_on[i], NULL);
+ if (IS_ERR(c)) {
+ pr_err("%s: failed to get clk %s", __func__,
+ clks_init_on[i]);
+ return PTR_ERR(c);
+ }
+ clk_prepare_enable(c);
+ }
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
+ base = of_iomap(np, 0);
+ WARN_ON(!base);
+ irq = irq_of_parse_and_map(np, 0);
+ mxc_timer_init(NULL, base, irq);
+
+ return 0;
+}
diff --git a/arch/arm/mach-imx/clk-pfd.c b/arch/arm/mach-imx/clk-pfd.c
new file mode 100644
index 000000000000..e2ed4160f329
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pfd.c
@@ -0,0 +1,147 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include "clk.h"
+
+/**
+ * struct clk_pfd - IMX PFD clock
+ * @clk_hw: clock source
+ * @reg: PFD register address
+ * @idx: the index of PFD encoded in the register
+ *
+ * PFD clock found on i.MX6 series. Each register for PFD has 4 clk_pfd
+ * data encoded, and member idx is used to specify the one. And each
+ * register has SET, CLR and TOG registers at offset 0x4 0x8 and 0xc.
+ */
+struct clk_pfd {
+ struct clk_hw hw;
+ void __iomem *reg;
+ u8 idx;
+};
+
+#define to_clk_pfd(_hw) container_of(_hw, struct clk_pfd, hw)
+
+#define SET 0x4
+#define CLR 0x8
+#define OTG 0xc
+
+static int clk_pfd_enable(struct clk_hw *hw)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+
+ writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + CLR);
+
+ return 0;
+}
+
+static void clk_pfd_disable(struct clk_hw *hw)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+
+ writel_relaxed(1 << ((pfd->idx + 1) * 8 - 1), pfd->reg + SET);
+}
+
+static unsigned long clk_pfd_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+ u64 tmp = parent_rate;
+ u8 frac = (readl_relaxed(pfd->reg) >> (pfd->idx * 8)) & 0x3f;
+
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static long clk_pfd_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ u64 tmp = *prate;
+ u8 frac;
+
+ tmp = tmp * 18 + rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ if (frac < 12)
+ frac = 12;
+ else if (frac > 35)
+ frac = 35;
+ tmp = *prate;
+ tmp *= 18;
+ do_div(tmp, frac);
+
+ return tmp;
+}
+
+static int clk_pfd_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pfd *pfd = to_clk_pfd(hw);
+ u64 tmp = parent_rate;
+ u8 frac;
+
+ tmp = tmp * 18 + rate / 2;
+ do_div(tmp, rate);
+ frac = tmp;
+ if (frac < 12)
+ frac = 12;
+ else if (frac > 35)
+ frac = 35;
+
+ writel_relaxed(0x3f << (pfd->idx * 8), pfd->reg + CLR);
+ writel_relaxed(frac << (pfd->idx * 8), pfd->reg + SET);
+
+ return 0;
+}
+
+static const struct clk_ops clk_pfd_ops = {
+ .enable = clk_pfd_enable,
+ .disable = clk_pfd_disable,
+ .recalc_rate = clk_pfd_recalc_rate,
+ .round_rate = clk_pfd_round_rate,
+ .set_rate = clk_pfd_set_rate,
+};
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx)
+{
+ struct clk_pfd *pfd;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pfd = kzalloc(sizeof(*pfd), GFP_KERNEL);
+ if (!pfd)
+ return ERR_PTR(-ENOMEM);
+
+ pfd->reg = reg;
+ pfd->idx = idx;
+
+ init.name = name;
+ init.ops = &clk_pfd_ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ pfd->hw.init = &init;
+
+ clk = clk_register(NULL, &pfd->hw);
+ if (IS_ERR(clk))
+ kfree(pfd);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c
new file mode 100644
index 000000000000..2d856f9ccf59
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pllv1.c
@@ -0,0 +1,66 @@
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <mach/clock.h>
+#include "clk.h"
+
+/**
+ * pll v1
+ *
+ * @clk_hw clock source
+ * @parent the parent clock name
+ * @base base address of pll registers
+ *
+ * PLL clock version 1, found on i.MX1/21/25/27/31/35
+ */
+struct clk_pllv1 {
+ struct clk_hw hw;
+ void __iomem *base;
+};
+
+#define to_clk_pllv1(clk) (container_of(clk, struct clk_pllv1, clk))
+
+static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv1 *pll = to_clk_pllv1(hw);
+
+ return mxc_decode_pll(readl(pll->base), parent_rate);
+}
+
+struct clk_ops clk_pllv1_ops = {
+ .recalc_rate = clk_pllv1_recalc_rate,
+};
+
+struct clk *imx_clk_pllv1(const char *name, const char *parent,
+ void __iomem *base)
+{
+ struct clk_pllv1 *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kmalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->base = base;
+
+ init.name = name;
+ init.ops = &clk_pllv1_ops;
+ init.flags = 0;
+ init.parent_names = &parent;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c
new file mode 100644
index 000000000000..4685919deb63
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pllv2.c
@@ -0,0 +1,249 @@
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <asm/div64.h>
+
+#include "clk.h"
+
+#define to_clk_pllv2(clk) (container_of(clk, struct clk_pllv2, clk))
+
+/* PLL Register Offsets */
+#define MXC_PLL_DP_CTL 0x00
+#define MXC_PLL_DP_CONFIG 0x04
+#define MXC_PLL_DP_OP 0x08
+#define MXC_PLL_DP_MFD 0x0C
+#define MXC_PLL_DP_MFN 0x10
+#define MXC_PLL_DP_MFNMINUS 0x14
+#define MXC_PLL_DP_MFNPLUS 0x18
+#define MXC_PLL_DP_HFS_OP 0x1C
+#define MXC_PLL_DP_HFS_MFD 0x20
+#define MXC_PLL_DP_HFS_MFN 0x24
+#define MXC_PLL_DP_MFN_TOGC 0x28
+#define MXC_PLL_DP_DESTAT 0x2c
+
+/* PLL Register Bit definitions */
+#define MXC_PLL_DP_CTL_MUL_CTRL 0x2000
+#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000
+#define MXC_PLL_DP_CTL_DPDCK0_2_OFFSET 12
+#define MXC_PLL_DP_CTL_ADE 0x800
+#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_MASK (3 << 8)
+#define MXC_PLL_DP_CTL_REF_CLK_SEL_OFFSET 8
+#define MXC_PLL_DP_CTL_HFSM 0x80
+#define MXC_PLL_DP_CTL_PRE 0x40
+#define MXC_PLL_DP_CTL_UPEN 0x20
+#define MXC_PLL_DP_CTL_RST 0x10
+#define MXC_PLL_DP_CTL_RCP 0x8
+#define MXC_PLL_DP_CTL_PLM 0x4
+#define MXC_PLL_DP_CTL_BRM0 0x2
+#define MXC_PLL_DP_CTL_LRF 0x1
+
+#define MXC_PLL_DP_CONFIG_BIST 0x8
+#define MXC_PLL_DP_CONFIG_SJC_CE 0x4
+#define MXC_PLL_DP_CONFIG_AREN 0x2
+#define MXC_PLL_DP_CONFIG_LDREQ 0x1
+
+#define MXC_PLL_DP_OP_MFI_OFFSET 4
+#define MXC_PLL_DP_OP_MFI_MASK (0xF << 4)
+#define MXC_PLL_DP_OP_PDF_OFFSET 0
+#define MXC_PLL_DP_OP_PDF_MASK 0xF
+
+#define MXC_PLL_DP_MFD_OFFSET 0
+#define MXC_PLL_DP_MFD_MASK 0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_OFFSET 0x0
+#define MXC_PLL_DP_MFN_MASK 0x07FFFFFF
+
+#define MXC_PLL_DP_MFN_TOGC_TOG_DIS (1 << 17)
+#define MXC_PLL_DP_MFN_TOGC_TOG_EN (1 << 16)
+#define MXC_PLL_DP_MFN_TOGC_CNT_OFFSET 0x0
+#define MXC_PLL_DP_MFN_TOGC_CNT_MASK 0xFFFF
+
+#define MXC_PLL_DP_DESTAT_TOG_SEL (1 << 31)
+#define MXC_PLL_DP_DESTAT_MFN 0x07FFFFFF
+
+#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
+
+struct clk_pllv2 {
+ struct clk_hw hw;
+ void __iomem *base;
+};
+
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
+ unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
+ void __iomem *pllbase;
+ s64 temp;
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+ pllbase = pll->base;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+ dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
+
+ if (pll_hfsm == 0) {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+ } else {
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
+ }
+ pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
+ mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
+ mfi = (mfi <= 5) ? 5 : mfi;
+ mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
+ mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
+ /* Sign extend to 32-bits */
+ if (mfn >= 0x04000000) {
+ mfn |= 0xFC000000;
+ mfn_abs = -mfn;
+ }
+
+ ref_clk = 2 * parent_rate;
+ if (dbl != 0)
+ ref_clk *= 2;
+
+ ref_clk /= (pdf + 1);
+ temp = (u64) ref_clk * mfn_abs;
+ do_div(temp, mfd + 1);
+ if (mfn < 0)
+ temp = -temp;
+ temp = (ref_clk * mfi) + temp;
+
+ return temp;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ u32 reg;
+ void __iomem *pllbase;
+ long mfi, pdf, mfn, mfd = 999999;
+ s64 temp64;
+ unsigned long quad_parent_rate;
+ unsigned long pll_hfsm, dp_ctl;
+
+ pllbase = pll->base;
+
+ quad_parent_rate = 4 * parent_rate;
+ pdf = mfi = -1;
+ while (++pdf < 16 && mfi < 5)
+ mfi = rate * (pdf+1) / quad_parent_rate;
+ if (mfi > 15)
+ return -EINVAL;
+ pdf--;
+
+ temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
+ do_div(temp64, quad_parent_rate/1000000);
+ mfn = (long)temp64;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ /* use dpdck0_2 */
+ __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
+ pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
+ if (pll_hfsm == 0) {
+ reg = mfi << 4 | pdf;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
+ __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
+ __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
+ } else {
+ reg = mfi << 4 | pdf;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
+ __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
+ __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
+ }
+
+ return 0;
+}
+
+static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ return rate;
+}
+
+static int clk_pllv2_prepare(struct clk_hw *hw)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ u32 reg;
+ void __iomem *pllbase;
+ int i = 0;
+
+ pllbase = pll->base;
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+
+ /* Wait for lock */
+ do {
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ if (reg & MXC_PLL_DP_CTL_LRF)
+ break;
+
+ udelay(1);
+ } while (++i < MAX_DPLL_WAIT_TRIES);
+
+ if (i == MAX_DPLL_WAIT_TRIES) {
+ pr_err("MX5: pll locking failed\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void clk_pllv2_unprepare(struct clk_hw *hw)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ u32 reg;
+ void __iomem *pllbase;
+
+ pllbase = pll->base;
+ reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
+ __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
+}
+
+struct clk_ops clk_pllv2_ops = {
+ .prepare = clk_pllv2_prepare,
+ .unprepare = clk_pllv2_unprepare,
+ .recalc_rate = clk_pllv2_recalc_rate,
+ .round_rate = clk_pllv2_round_rate,
+ .set_rate = clk_pllv2_set_rate,
+};
+
+struct clk *imx_clk_pllv2(const char *name, const char *parent,
+ void __iomem *base)
+{
+ struct clk_pllv2 *pll;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ pll->base = base;
+
+ init.name = name;
+ init.ops = &clk_pllv2_ops;
+ init.flags = 0;
+ init.parent_names = &parent;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk-pllv3.c b/arch/arm/mach-imx/clk-pllv3.c
new file mode 100644
index 000000000000..36aac947bce1
--- /dev/null
+++ b/arch/arm/mach-imx/clk-pllv3.c
@@ -0,0 +1,419 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ * Copyright 2012 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/err.h>
+#include "clk.h"
+
+#define PLL_NUM_OFFSET 0x10
+#define PLL_DENOM_OFFSET 0x20
+
+#define BM_PLL_POWER (0x1 << 12)
+#define BM_PLL_ENABLE (0x1 << 13)
+#define BM_PLL_BYPASS (0x1 << 16)
+#define BM_PLL_LOCK (0x1 << 31)
+
+/**
+ * struct clk_pllv3 - IMX PLL clock version 3
+ * @clk_hw: clock source
+ * @base: base address of PLL registers
+ * @powerup_set: set POWER bit to power up the PLL
+ * @gate_mask: mask of gate bits
+ * @div_mask: mask of divider bits
+ *
+ * IMX PLL clock version 3, found on i.MX6 series. Divider for pllv3
+ * is actually a multiplier, and always sits at bit 0.
+ */
+struct clk_pllv3 {
+ struct clk_hw hw;
+ void __iomem *base;
+ bool powerup_set;
+ u32 gate_mask;
+ u32 div_mask;
+};
+
+#define to_clk_pllv3(_hw) container_of(_hw, struct clk_pllv3, hw)
+
+static int clk_pllv3_prepare(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ unsigned long timeout = jiffies + msecs_to_jiffies(10);
+ u32 val;
+
+ val = readl_relaxed(pll->base);
+ val &= ~BM_PLL_BYPASS;
+ if (pll->powerup_set)
+ val |= BM_PLL_POWER;
+ else
+ val &= ~BM_PLL_POWER;
+ writel_relaxed(val, pll->base);
+
+ /* Wait for PLL to lock */
+ while (!(readl_relaxed(pll->base) & BM_PLL_LOCK))
+ if (time_after(jiffies, timeout))
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static void clk_pllv3_unprepare(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val;
+
+ val = readl_relaxed(pll->base);
+ val |= BM_PLL_BYPASS;
+ if (pll->powerup_set)
+ val &= ~BM_PLL_POWER;
+ else
+ val |= BM_PLL_POWER;
+ writel_relaxed(val, pll->base);
+}
+
+static int clk_pllv3_enable(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val;
+
+ val = readl_relaxed(pll->base);
+ val |= pll->gate_mask;
+ writel_relaxed(val, pll->base);
+
+ return 0;
+}
+
+static void clk_pllv3_disable(struct clk_hw *hw)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val;
+
+ val = readl_relaxed(pll->base);
+ val &= ~pll->gate_mask;
+ writel_relaxed(val, pll->base);
+}
+
+static unsigned long clk_pllv3_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+ return (div == 1) ? parent_rate * 22 : parent_rate * 20;
+}
+
+static long clk_pllv3_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = *prate;
+
+ return (rate >= parent_rate * 22) ? parent_rate * 22 :
+ parent_rate * 20;
+}
+
+static int clk_pllv3_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val, div;
+
+ if (rate == parent_rate * 22)
+ div = 1;
+ else if (rate == parent_rate * 20)
+ div = 0;
+ else
+ return -EINVAL;
+
+ val = readl_relaxed(pll->base);
+ val &= ~pll->div_mask;
+ val |= div;
+ writel_relaxed(val, pll->base);
+
+ return 0;
+}
+
+static const struct clk_ops clk_pllv3_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .enable = clk_pllv3_enable,
+ .disable = clk_pllv3_disable,
+ .recalc_rate = clk_pllv3_recalc_rate,
+ .round_rate = clk_pllv3_round_rate,
+ .set_rate = clk_pllv3_set_rate,
+};
+
+static unsigned long clk_pllv3_sys_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+ return parent_rate * div / 2;
+}
+
+static long clk_pllv3_sys_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = *prate;
+ unsigned long min_rate = parent_rate * 54 / 2;
+ unsigned long max_rate = parent_rate * 108 / 2;
+ u32 div;
+
+ if (rate > max_rate)
+ rate = max_rate;
+ else if (rate < min_rate)
+ rate = min_rate;
+ div = rate * 2 / parent_rate;
+
+ return parent_rate * div / 2;
+}
+
+static int clk_pllv3_sys_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ unsigned long min_rate = parent_rate * 54 / 2;
+ unsigned long max_rate = parent_rate * 108 / 2;
+ u32 val, div;
+
+ if (rate < min_rate || rate > max_rate)
+ return -EINVAL;
+
+ div = rate * 2 / parent_rate;
+ val = readl_relaxed(pll->base);
+ val &= ~pll->div_mask;
+ val |= div;
+ writel_relaxed(val, pll->base);
+
+ return 0;
+}
+
+static const struct clk_ops clk_pllv3_sys_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .enable = clk_pllv3_enable,
+ .disable = clk_pllv3_disable,
+ .recalc_rate = clk_pllv3_sys_recalc_rate,
+ .round_rate = clk_pllv3_sys_round_rate,
+ .set_rate = clk_pllv3_sys_set_rate,
+};
+
+static unsigned long clk_pllv3_av_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 mfn = readl_relaxed(pll->base + PLL_NUM_OFFSET);
+ u32 mfd = readl_relaxed(pll->base + PLL_DENOM_OFFSET);
+ u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+ return (parent_rate * div) + ((parent_rate / mfd) * mfn);
+}
+
+static long clk_pllv3_av_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ unsigned long parent_rate = *prate;
+ unsigned long min_rate = parent_rate * 27;
+ unsigned long max_rate = parent_rate * 54;
+ u32 div;
+ u32 mfn, mfd = 1000000;
+ s64 temp64;
+
+ if (rate > max_rate)
+ rate = max_rate;
+ else if (rate < min_rate)
+ rate = min_rate;
+
+ div = rate / parent_rate;
+ temp64 = (u64) (rate - div * parent_rate);
+ temp64 *= mfd;
+ do_div(temp64, parent_rate);
+ mfn = temp64;
+
+ return parent_rate * div + parent_rate / mfd * mfn;
+}
+
+static int clk_pllv3_av_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ unsigned long min_rate = parent_rate * 27;
+ unsigned long max_rate = parent_rate * 54;
+ u32 val, div;
+ u32 mfn, mfd = 1000000;
+ s64 temp64;
+
+ if (rate < min_rate || rate > max_rate)
+ return -EINVAL;
+
+ div = rate / parent_rate;
+ temp64 = (u64) (rate - div * parent_rate);
+ temp64 *= mfd;
+ do_div(temp64, parent_rate);
+ mfn = temp64;
+
+ val = readl_relaxed(pll->base);
+ val &= ~pll->div_mask;
+ val |= div;
+ writel_relaxed(val, pll->base);
+ writel_relaxed(mfn, pll->base + PLL_NUM_OFFSET);
+ writel_relaxed(mfd, pll->base + PLL_DENOM_OFFSET);
+
+ return 0;
+}
+
+static const struct clk_ops clk_pllv3_av_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .enable = clk_pllv3_enable,
+ .disable = clk_pllv3_disable,
+ .recalc_rate = clk_pllv3_av_recalc_rate,
+ .round_rate = clk_pllv3_av_round_rate,
+ .set_rate = clk_pllv3_av_set_rate,
+};
+
+static unsigned long clk_pllv3_enet_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 div = readl_relaxed(pll->base) & pll->div_mask;
+
+ switch (div) {
+ case 0:
+ return 25000000;
+ case 1:
+ return 50000000;
+ case 2:
+ return 100000000;
+ case 3:
+ return 125000000;
+ }
+
+ return 0;
+}
+
+static long clk_pllv3_enet_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ if (rate >= 125000000)
+ rate = 125000000;
+ else if (rate >= 100000000)
+ rate = 100000000;
+ else if (rate >= 50000000)
+ rate = 50000000;
+ else
+ rate = 25000000;
+ return rate;
+}
+
+static int clk_pllv3_enet_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv3 *pll = to_clk_pllv3(hw);
+ u32 val, div;
+
+ switch (rate) {
+ case 25000000:
+ div = 0;
+ break;
+ case 50000000:
+ div = 1;
+ break;
+ case 100000000:
+ div = 2;
+ break;
+ case 125000000:
+ div = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ val = readl_relaxed(pll->base);
+ val &= ~pll->div_mask;
+ val |= div;
+ writel_relaxed(val, pll->base);
+
+ return 0;
+}
+
+static const struct clk_ops clk_pllv3_enet_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .enable = clk_pllv3_enable,
+ .disable = clk_pllv3_disable,
+ .recalc_rate = clk_pllv3_enet_recalc_rate,
+ .round_rate = clk_pllv3_enet_round_rate,
+ .set_rate = clk_pllv3_enet_set_rate,
+};
+
+static const struct clk_ops clk_pllv3_mlb_ops = {
+ .prepare = clk_pllv3_prepare,
+ .unprepare = clk_pllv3_unprepare,
+ .enable = clk_pllv3_enable,
+ .disable = clk_pllv3_disable,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+ const char *parent_name, void __iomem *base,
+ u32 gate_mask, u32 div_mask)
+{
+ struct clk_pllv3 *pll;
+ const struct clk_ops *ops;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ pll = kzalloc(sizeof(*pll), GFP_KERNEL);
+ if (!pll)
+ return ERR_PTR(-ENOMEM);
+
+ switch (type) {
+ case IMX_PLLV3_SYS:
+ ops = &clk_pllv3_sys_ops;
+ break;
+ case IMX_PLLV3_USB:
+ ops = &clk_pllv3_ops;
+ pll->powerup_set = true;
+ break;
+ case IMX_PLLV3_AV:
+ ops = &clk_pllv3_av_ops;
+ break;
+ case IMX_PLLV3_ENET:
+ ops = &clk_pllv3_enet_ops;
+ break;
+ case IMX_PLLV3_MLB:
+ ops = &clk_pllv3_mlb_ops;
+ break;
+ default:
+ ops = &clk_pllv3_ops;
+ }
+ pll->base = base;
+ pll->gate_mask = gate_mask;
+ pll->div_mask = div_mask;
+
+ init.name = name;
+ init.ops = ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ pll->hw.init = &init;
+
+ clk = clk_register(NULL, &pll->hw);
+ if (IS_ERR(clk))
+ kfree(pll);
+
+ return clk;
+}
diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h
new file mode 100644
index 000000000000..1bf64fe2523c
--- /dev/null
+++ b/arch/arm/mach-imx/clk.h
@@ -0,0 +1,83 @@
+#ifndef __MACH_IMX_CLK_H
+#define __MACH_IMX_CLK_H
+
+#include <linux/spinlock.h>
+#include <linux/clk-provider.h>
+#include <mach/clock.h>
+
+struct clk *imx_clk_pllv1(const char *name, const char *parent,
+ void __iomem *base);
+
+struct clk *imx_clk_pllv2(const char *name, const char *parent,
+ void __iomem *base);
+
+enum imx_pllv3_type {
+ IMX_PLLV3_GENERIC,
+ IMX_PLLV3_SYS,
+ IMX_PLLV3_USB,
+ IMX_PLLV3_AV,
+ IMX_PLLV3_ENET,
+ IMX_PLLV3_MLB,
+};
+
+struct clk *imx_clk_pllv3(enum imx_pllv3_type type, const char *name,
+ const char *parent_name, void __iomem *base, u32 gate_mask,
+ u32 div_mask);
+
+struct clk *clk_register_gate2(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate_flags, spinlock_t *lock);
+
+static inline struct clk *imx_clk_gate2(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate2(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, 0, &imx_ccm_lock);
+}
+
+struct clk *imx_clk_pfd(const char *name, const char *parent_name,
+ void __iomem *reg, u8 idx);
+
+struct clk *imx_clk_busy_divider(const char *name, const char *parent_name,
+ void __iomem *reg, u8 shift, u8 width,
+ void __iomem *busy_reg, u8 busy_shift);
+
+struct clk *imx_clk_busy_mux(const char *name, void __iomem *reg, u8 shift,
+ u8 width, void __iomem *busy_reg, u8 busy_shift,
+ const char **parent_names, int num_parents);
+
+static inline struct clk *imx_clk_fixed(const char *name, int rate)
+{
+ return clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
+}
+
+static inline struct clk *imx_clk_divider(const char *name, const char *parent,
+ void __iomem *reg, u8 shift, u8 width)
+{
+ return clk_register_divider(NULL, name, parent, CLK_SET_RATE_PARENT,
+ reg, shift, width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_gate(const char *name, const char *parent,
+ void __iomem *reg, u8 shift)
+{
+ return clk_register_gate(NULL, name, parent, CLK_SET_RATE_PARENT, reg,
+ shift, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_mux(const char *name, void __iomem *reg,
+ u8 shift, u8 width, const char **parents, int num_parents)
+{
+ return clk_register_mux(NULL, name, parents, num_parents, 0, reg, shift,
+ width, 0, &imx_ccm_lock);
+}
+
+static inline struct clk *imx_clk_fixed_factor(const char *name,
+ const char *parent, unsigned int mult, unsigned int div)
+{
+ return clk_register_fixed_factor(NULL, name, parent,
+ CLK_SET_RATE_PARENT, mult, div);
+}
+
+#endif
diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c
deleted file mode 100644
index 4aabeb241563..000000000000
--- a/arch/arm/mach-imx/clock-imx1.c
+++ /dev/null
@@ -1,636 +0,0 @@
-/*
- * Copyright (C) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/math64.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#define IO_ADDR_CCM(off) (MX1_IO_ADDRESS(MX1_CCM_BASE_ADDR + (off)))
-
-/* CCM register addresses */
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_PCDR IO_ADDR_CCM(0x20)
-
-#define CCM_CSCR_CLKO_OFFSET 29
-#define CCM_CSCR_CLKO_MASK (0x7 << 29)
-#define CCM_CSCR_USB_OFFSET 26
-#define CCM_CSCR_USB_MASK (0x7 << 26)
-#define CCM_CSCR_OSC_EN_SHIFT 17
-#define CCM_CSCR_SYSTEM_SEL (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET 10
-#define CCM_CSCR_BCLK_MASK (0xf << 10)
-#define CCM_CSCR_PRESC (1 << 15)
-
-#define CCM_PCDR_PCLK3_OFFSET 16
-#define CCM_PCDR_PCLK3_MASK (0x7f << 16)
-#define CCM_PCDR_PCLK2_OFFSET 4
-#define CCM_PCDR_PCLK2_MASK (0xf << 4)
-#define CCM_PCDR_PCLK1_OFFSET 0
-#define CCM_PCDR_PCLK1_MASK 0xf
-
-#define IO_ADDR_SCM(off) (MX1_IO_ADDRESS(MX1_SCM_BASE_ADDR + (off)))
-
-/* SCM register addresses */
-#define SCM_GCCR IO_ADDR_SCM(0xc)
-
-#define SCM_GCCR_DMA_CLK_EN_OFFSET 3
-#define SCM_GCCR_CSI_CLK_EN_OFFSET 2
-#define SCM_GCCR_MMA_CLK_EN_OFFSET 1
-#define SCM_GCCR_USBD_CLK_EN_OFFSET 0
-
-static int _clk_enable(struct clk *clk)
-{
- unsigned int reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
- unsigned int reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_can_use_parent(const struct clk *clk_arr[], unsigned int size,
- struct clk *parent)
-{
- int i;
-
- for (i = 0; i < size; i++)
- if (parent == clk_arr[i])
- return i;
-
- return -EINVAL;
-}
-
-static unsigned long
-_clk_simple_round_rate(struct clk *clk, unsigned long rate, unsigned int limit)
-{
- int div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > limit)
- div = limit;
-
- return parent_rate / div;
-}
-
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
-{
- return clk->parent->round_rate(clk->parent, rate);
-}
-
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
-{
- return clk->parent->set_rate(clk->parent, rate);
-}
-
-static unsigned long clk16m_get_rate(struct clk *clk)
-{
- return 16000000;
-}
-
-static struct clk clk16m = {
- .get_rate = clk16m_get_rate,
- .enable = _clk_enable,
- .enable_reg = CCM_CSCR,
- .enable_shift = CCM_CSCR_OSC_EN_SHIFT,
- .disable = _clk_disable,
-};
-
-/* in Hz */
-static unsigned long clk32_rate;
-
-static unsigned long clk32_get_rate(struct clk *clk)
-{
- return clk32_rate;
-}
-
-static struct clk clk32 = {
- .get_rate = clk32_get_rate,
-};
-
-static unsigned long clk32_premult_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) * 512;
-}
-
-static struct clk clk32_premult = {
- .parent = &clk32,
- .get_rate = clk32_premult_get_rate,
-};
-
-static const struct clk *prem_clk_clocks[] = {
- &clk32_premult,
- &clk16m,
-};
-
-static int prem_clk_set_parent(struct clk *clk, struct clk *parent)
-{
- int i;
- unsigned int reg = __raw_readl(CCM_CSCR);
-
- i = _clk_can_use_parent(prem_clk_clocks, ARRAY_SIZE(prem_clk_clocks),
- parent);
-
- switch (i) {
- case 0:
- reg &= ~CCM_CSCR_SYSTEM_SEL;
- break;
- case 1:
- reg |= CCM_CSCR_SYSTEM_SEL;
- break;
- default:
- return i;
- }
-
- __raw_writel(reg, CCM_CSCR);
-
- return 0;
-}
-
-static struct clk prem_clk = {
- .set_parent = prem_clk_set_parent,
-};
-
-static unsigned long system_clk_get_rate(struct clk *clk)
-{
- return mxc_decode_pll(__raw_readl(CCM_SPCTL0),
- clk_get_rate(clk->parent));
-}
-
-static struct clk system_clk = {
- .parent = &prem_clk,
- .get_rate = system_clk_get_rate,
-};
-
-static unsigned long mcu_clk_get_rate(struct clk *clk)
-{
- return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
- clk_get_rate(clk->parent));
-}
-
-static struct clk mcu_clk = {
- .parent = &clk32_premult,
- .get_rate = mcu_clk_get_rate,
-};
-
-static unsigned long fclk_get_rate(struct clk *clk)
-{
- unsigned long fclk = clk_get_rate(clk->parent);
-
- if (__raw_readl(CCM_CSCR) & CCM_CSCR_PRESC)
- fclk /= 2;
-
- return fclk;
-}
-
-static struct clk fclk = {
- .parent = &mcu_clk,
- .get_rate = fclk_get_rate,
-};
-
-/*
- * get hclk ( SDRAM, CSI, Memory Stick, I2C, DMA )
- */
-static unsigned long hclk_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
- CCM_CSCR_BCLK_MASK) >> CCM_CSCR_BCLK_OFFSET) + 1);
-}
-
-static unsigned long hclk_round_rate(struct clk *clk, unsigned long rate)
-{
- return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int hclk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int div;
- unsigned int reg;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 16 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- div--;
-
- reg = __raw_readl(CCM_CSCR);
- reg &= ~CCM_CSCR_BCLK_MASK;
- reg |= div << CCM_CSCR_BCLK_OFFSET;
- __raw_writel(reg, CCM_CSCR);
-
- return 0;
-}
-
-static struct clk hclk = {
- .parent = &system_clk,
- .get_rate = hclk_get_rate,
- .round_rate = hclk_round_rate,
- .set_rate = hclk_set_rate,
-};
-
-static unsigned long clk48m_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / (((__raw_readl(CCM_CSCR) &
- CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET) + 1);
-}
-
-static unsigned long clk48m_round_rate(struct clk *clk, unsigned long rate)
-{
- return _clk_simple_round_rate(clk, rate, 8);
-}
-
-static int clk48m_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int div;
- unsigned int reg;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 8 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- div--;
-
- reg = __raw_readl(CCM_CSCR);
- reg &= ~CCM_CSCR_USB_MASK;
- reg |= div << CCM_CSCR_USB_OFFSET;
- __raw_writel(reg, CCM_CSCR);
-
- return 0;
-}
-
-static struct clk clk48m = {
- .parent = &system_clk,
- .get_rate = clk48m_get_rate,
- .round_rate = clk48m_round_rate,
- .set_rate = clk48m_set_rate,
-};
-
-/*
- * get peripheral clock 1 ( UART[12], Timer[12], PWM )
- */
-static unsigned long perclk1_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
- CCM_PCDR_PCLK1_MASK) >> CCM_PCDR_PCLK1_OFFSET) + 1);
-}
-
-static unsigned long perclk1_round_rate(struct clk *clk, unsigned long rate)
-{
- return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int perclk1_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int div;
- unsigned int reg;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 16 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- div--;
-
- reg = __raw_readl(CCM_PCDR);
- reg &= ~CCM_PCDR_PCLK1_MASK;
- reg |= div << CCM_PCDR_PCLK1_OFFSET;
- __raw_writel(reg, CCM_PCDR);
-
- return 0;
-}
-
-/*
- * get peripheral clock 2 ( LCD, SD, SPI[12] )
- */
-static unsigned long perclk2_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
- CCM_PCDR_PCLK2_MASK) >> CCM_PCDR_PCLK2_OFFSET) + 1);
-}
-
-static unsigned long perclk2_round_rate(struct clk *clk, unsigned long rate)
-{
- return _clk_simple_round_rate(clk, rate, 16);
-}
-
-static int perclk2_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int div;
- unsigned int reg;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 16 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- div--;
-
- reg = __raw_readl(CCM_PCDR);
- reg &= ~CCM_PCDR_PCLK2_MASK;
- reg |= div << CCM_PCDR_PCLK2_OFFSET;
- __raw_writel(reg, CCM_PCDR);
-
- return 0;
-}
-
-/*
- * get peripheral clock 3 ( SSI )
- */
-static unsigned long perclk3_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / (((__raw_readl(CCM_PCDR) &
- CCM_PCDR_PCLK3_MASK) >> CCM_PCDR_PCLK3_OFFSET) + 1);
-}
-
-static unsigned long perclk3_round_rate(struct clk *clk, unsigned long rate)
-{
- return _clk_simple_round_rate(clk, rate, 128);
-}
-
-static int perclk3_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned int div;
- unsigned int reg;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 128 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- div--;
-
- reg = __raw_readl(CCM_PCDR);
- reg &= ~CCM_PCDR_PCLK3_MASK;
- reg |= div << CCM_PCDR_PCLK3_OFFSET;
- __raw_writel(reg, CCM_PCDR);
-
- return 0;
-}
-
-static struct clk perclk[] = {
- {
- .id = 0,
- .parent = &system_clk,
- .get_rate = perclk1_get_rate,
- .round_rate = perclk1_round_rate,
- .set_rate = perclk1_set_rate,
- }, {
- .id = 1,
- .parent = &system_clk,
- .get_rate = perclk2_get_rate,
- .round_rate = perclk2_round_rate,
- .set_rate = perclk2_set_rate,
- }, {
- .id = 2,
- .parent = &system_clk,
- .get_rate = perclk3_get_rate,
- .round_rate = perclk3_round_rate,
- .set_rate = perclk3_set_rate,
- }
-};
-
-static const struct clk *clko_clocks[] = {
- &perclk[0],
- &hclk,
- &clk48m,
- &clk16m,
- &prem_clk,
- &fclk,
-};
-
-static int clko_set_parent(struct clk *clk, struct clk *parent)
-{
- int i;
- unsigned int reg;
-
- i = _clk_can_use_parent(clko_clocks, ARRAY_SIZE(clko_clocks), parent);
- if (i < 0)
- return i;
-
- reg = __raw_readl(CCM_CSCR) & ~CCM_CSCR_CLKO_MASK;
- reg |= i << CCM_CSCR_CLKO_OFFSET;
- __raw_writel(reg, CCM_CSCR);
-
- if (clko_clocks[i]->set_rate && clko_clocks[i]->round_rate) {
- clk->set_rate = _clk_parent_set_rate;
- clk->round_rate = _clk_parent_round_rate;
- } else {
- clk->set_rate = NULL;
- clk->round_rate = NULL;
- }
-
- return 0;
-}
-
-static struct clk clko_clk = {
- .set_parent = clko_set_parent,
-};
-
-static struct clk dma_clk = {
- .parent = &hclk,
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- .enable = _clk_enable,
- .enable_reg = SCM_GCCR,
- .enable_shift = SCM_GCCR_DMA_CLK_EN_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk csi_clk = {
- .parent = &hclk,
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- .enable = _clk_enable,
- .enable_reg = SCM_GCCR,
- .enable_shift = SCM_GCCR_CSI_CLK_EN_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk mma_clk = {
- .parent = &hclk,
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- .enable = _clk_enable,
- .enable_reg = SCM_GCCR,
- .enable_shift = SCM_GCCR_MMA_CLK_EN_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk usbd_clk = {
- .parent = &clk48m,
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- .enable = _clk_enable,
- .enable_reg = SCM_GCCR,
- .enable_shift = SCM_GCCR_USBD_CLK_EN_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk gpt_clk = {
- .parent = &perclk[0],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk uart_clk = {
- .parent = &perclk[0],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk i2c_clk = {
- .parent = &hclk,
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk spi_clk = {
- .parent = &perclk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk sdhc_clk = {
- .parent = &perclk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk lcdc_clk = {
- .parent = &perclk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk mshc_clk = {
- .parent = &hclk,
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk ssi_clk = {
- .parent = &perclk[2],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
-};
-
-static struct clk rtc_clk = {
- .parent = &clk32,
-};
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-static struct clk_lookup lookups[] __initdata = {
- _REGISTER_CLOCK(NULL, "dma", dma_clk)
- _REGISTER_CLOCK("mx1-camera.0", NULL, csi_clk)
- _REGISTER_CLOCK(NULL, "mma", mma_clk)
- _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk)
- _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- _REGISTER_CLOCK("imx1-uart.0", NULL, uart_clk)
- _REGISTER_CLOCK("imx1-uart.1", NULL, uart_clk)
- _REGISTER_CLOCK("imx1-uart.2", NULL, uart_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
- _REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk)
- _REGISTER_CLOCK("imx1-cspi.1", NULL, spi_clk)
- _REGISTER_CLOCK("imx-mmc.0", NULL, sdhc_clk)
- _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
- _REGISTER_CLOCK(NULL, "mshc", mshc_clk)
- _REGISTER_CLOCK(NULL, "ssi", ssi_clk)
- _REGISTER_CLOCK("mxc_rtc.0", NULL, rtc_clk)
-};
-
-int __init mx1_clocks_init(unsigned long fref)
-{
- unsigned int reg;
-
- /* disable clocks we are able to */
- __raw_writel(0, SCM_GCCR);
-
- clk32_rate = fref;
- reg = __raw_readl(CCM_CSCR);
-
- /* detect clock reference for system PLL */
- if (reg & CCM_CSCR_SYSTEM_SEL) {
- prem_clk.parent = &clk16m;
- } else {
- /* ensure that oscillator is disabled */
- reg &= ~(1 << CCM_CSCR_OSC_EN_SHIFT);
- __raw_writel(reg, CCM_CSCR);
- prem_clk.parent = &clk32_premult;
- }
-
- /* detect reference for CLKO */
- reg = (reg & CCM_CSCR_CLKO_MASK) >> CCM_CSCR_CLKO_OFFSET;
- clko_clk.parent = (struct clk *)clko_clocks[reg];
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- clk_enable(&hclk);
- clk_enable(&fclk);
-
- mxc_timer_init(&gpt_clk, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
- MX1_TIM1_INT);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c
deleted file mode 100644
index ee15d8c9db08..000000000000
--- a/arch/arm/mach-imx/clock-imx21.c
+++ /dev/null
@@ -1,1239 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <asm/div64.h>
-
-#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
-
-/* Register offsets */
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
-#define CCM_PCDR0 IO_ADDR_CCM(0x18)
-#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0 IO_ADDR_CCM(0x20)
-#define CCM_PCCR1 IO_ADDR_CCM(0x24)
-#define CCM_CCSR IO_ADDR_CCM(0x28)
-#define CCM_PMCTL IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_PRESC_OFFSET 29
-#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET)
-
-#define CCM_CSCR_USB_OFFSET 26
-#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET)
-#define CCM_CSCR_SD_OFFSET 24
-#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET)
-#define CCM_CSCR_SPLLRES (1 << 22)
-#define CCM_CSCR_MPLLRES (1 << 21)
-#define CCM_CSCR_SSI2_OFFSET 20
-#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET)
-#define CCM_CSCR_SSI1_OFFSET 19
-#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET)
-#define CCM_CSCR_FIR_OFFSET 18
-#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET)
-#define CCM_CSCR_SP (1 << 17)
-#define CCM_CSCR_MCU (1 << 16)
-#define CCM_CSCR_BCLK_OFFSET 10
-#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET)
-#define CCM_CSCR_IPDIV_OFFSET 9
-#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET)
-
-#define CCM_CSCR_OSC26MDIV (1 << 4)
-#define CCM_CSCR_OSC26M (1 << 3)
-#define CCM_CSCR_FPM (1 << 2)
-#define CCM_CSCR_SPEN (1 << 1)
-#define CCM_CSCR_MPEN 1
-
-#define CCM_MPCTL0_CPLM (1 << 31)
-#define CCM_MPCTL0_PD_OFFSET 26
-#define CCM_MPCTL0_PD_MASK (0xf << 26)
-#define CCM_MPCTL0_MFD_OFFSET 16
-#define CCM_MPCTL0_MFD_MASK (0x3ff << 16)
-#define CCM_MPCTL0_MFI_OFFSET 10
-#define CCM_MPCTL0_MFI_MASK (0xf << 10)
-#define CCM_MPCTL0_MFN_OFFSET 0
-#define CCM_MPCTL0_MFN_MASK 0x3ff
-
-#define CCM_MPCTL1_LF (1 << 15)
-#define CCM_MPCTL1_BRMO (1 << 6)
-
-#define CCM_SPCTL0_CPLM (1 << 31)
-#define CCM_SPCTL0_PD_OFFSET 26
-#define CCM_SPCTL0_PD_MASK (0xf << 26)
-#define CCM_SPCTL0_MFD_OFFSET 16
-#define CCM_SPCTL0_MFD_MASK (0x3ff << 16)
-#define CCM_SPCTL0_MFI_OFFSET 10
-#define CCM_SPCTL0_MFI_MASK (0xf << 10)
-#define CCM_SPCTL0_MFN_OFFSET 0
-#define CCM_SPCTL0_MFN_MASK 0x3ff
-
-#define CCM_SPCTL1_LF (1 << 15)
-#define CCM_SPCTL1_BRMO (1 << 6)
-
-#define CCM_OSC26MCTL_PEAK_OFFSET 16
-#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16)
-#define CCM_OSC26MCTL_AGC_OFFSET 8
-#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8)
-#define CCM_OSC26MCTL_ANATEST_OFFSET 0
-#define CCM_OSC26MCTL_ANATEST_MASK 0x3f
-
-#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
-#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
-#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
-#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
-#define CCM_PCDR0_NFCDIV_OFFSET 12
-#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
-#define CCM_PCDR0_48MDIV_OFFSET 5
-#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET)
-#define CCM_PCDR0_FIRIDIV_OFFSET 0
-#define CCM_PCDR0_FIRIDIV_MASK 0x1f
-#define CCM_PCDR1_PERDIV4_OFFSET 24
-#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
-#define CCM_PCDR1_PERDIV3_OFFSET 16
-#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16)
-#define CCM_PCDR1_PERDIV2_OFFSET 8
-#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8)
-#define CCM_PCDR1_PERDIV1_OFFSET 0
-#define CCM_PCDR1_PERDIV1_MASK 0x3f
-
-#define CCM_PCCR_HCLK_CSI_OFFSET 31
-#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_DMA_OFFSET 30
-#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_BROM_OFFSET 28
-#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_EMMA_OFFSET 27
-#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_LCDC_OFFSET 26
-#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_SLCDC_OFFSET 25
-#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_USBOTG_OFFSET 24
-#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0
-#define CCM_PCCR_HCLK_BMI_OFFSET 23
-#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK)
-#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0
-#define CCM_PCCR_PERCLK4_OFFSET 22
-#define CCM_PCCR_PERCLK4_REG CCM_PCCR0
-#define CCM_PCCR_SLCDC_OFFSET 21
-#define CCM_PCCR_SLCDC_REG CCM_PCCR0
-#define CCM_PCCR_FIRI_BAUD_OFFSET 20
-#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK)
-#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0
-#define CCM_PCCR_NFC_OFFSET 19
-#define CCM_PCCR_NFC_REG CCM_PCCR0
-#define CCM_PCCR_LCDC_OFFSET 18
-#define CCM_PCCR_LCDC_REG CCM_PCCR0
-#define CCM_PCCR_SSI1_BAUD_OFFSET 17
-#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0
-#define CCM_PCCR_SSI2_BAUD_OFFSET 16
-#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0
-#define CCM_PCCR_EMMA_OFFSET 15
-#define CCM_PCCR_EMMA_REG CCM_PCCR0
-#define CCM_PCCR_USBOTG_OFFSET 14
-#define CCM_PCCR_USBOTG_REG CCM_PCCR0
-#define CCM_PCCR_DMA_OFFSET 13
-#define CCM_PCCR_DMA_REG CCM_PCCR0
-#define CCM_PCCR_I2C1_OFFSET 12
-#define CCM_PCCR_I2C1_REG CCM_PCCR0
-#define CCM_PCCR_GPIO_OFFSET 11
-#define CCM_PCCR_GPIO_REG CCM_PCCR0
-#define CCM_PCCR_SDHC2_OFFSET 10
-#define CCM_PCCR_SDHC2_REG CCM_PCCR0
-#define CCM_PCCR_SDHC1_OFFSET 9
-#define CCM_PCCR_SDHC1_REG CCM_PCCR0
-#define CCM_PCCR_FIRI_OFFSET 8
-#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK)
-#define CCM_PCCR_FIRI_REG CCM_PCCR0
-#define CCM_PCCR_SSI2_IPG_OFFSET 7
-#define CCM_PCCR_SSI2_REG CCM_PCCR0
-#define CCM_PCCR_SSI1_IPG_OFFSET 6
-#define CCM_PCCR_SSI1_REG CCM_PCCR0
-#define CCM_PCCR_CSPI2_OFFSET 5
-#define CCM_PCCR_CSPI2_REG CCM_PCCR0
-#define CCM_PCCR_CSPI1_OFFSET 4
-#define CCM_PCCR_CSPI1_REG CCM_PCCR0
-#define CCM_PCCR_UART4_OFFSET 3
-#define CCM_PCCR_UART4_REG CCM_PCCR0
-#define CCM_PCCR_UART3_OFFSET 2
-#define CCM_PCCR_UART3_REG CCM_PCCR0
-#define CCM_PCCR_UART2_OFFSET 1
-#define CCM_PCCR_UART2_REG CCM_PCCR0
-#define CCM_PCCR_UART1_OFFSET 0
-#define CCM_PCCR_UART1_REG CCM_PCCR0
-
-#define CCM_PCCR_OWIRE_OFFSET 31
-#define CCM_PCCR_OWIRE_REG CCM_PCCR1
-#define CCM_PCCR_KPP_OFFSET 30
-#define CCM_PCCR_KPP_REG CCM_PCCR1
-#define CCM_PCCR_RTC_OFFSET 29
-#define CCM_PCCR_RTC_REG CCM_PCCR1
-#define CCM_PCCR_PWM_OFFSET 28
-#define CCM_PCCR_PWM_REG CCM_PCCR1
-#define CCM_PCCR_GPT3_OFFSET 27
-#define CCM_PCCR_GPT3_REG CCM_PCCR1
-#define CCM_PCCR_GPT2_OFFSET 26
-#define CCM_PCCR_GPT2_REG CCM_PCCR1
-#define CCM_PCCR_GPT1_OFFSET 25
-#define CCM_PCCR_GPT1_REG CCM_PCCR1
-#define CCM_PCCR_WDT_OFFSET 24
-#define CCM_PCCR_WDT_REG CCM_PCCR1
-#define CCM_PCCR_CSPI3_OFFSET 23
-#define CCM_PCCR_CSPI3_REG CCM_PCCR1
-
-#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET)
-#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET)
-#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET)
-#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET)
-#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET)
-#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET)
-#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET)
-#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET)
-#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET)
-#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET)
-#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET)
-#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET)
-#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
-#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
-#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
-#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
-#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET)
-#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET)
-#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET)
-#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET)
-#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET)
-#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET)
-#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET)
-#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET)
-#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET)
-#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET)
-#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET)
-#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
-#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET)
-#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
-#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET)
-#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET)
-#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET)
-#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET)
-#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET)
-#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET)
-#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET)
-
-#define CCM_CCSR_32KSR (1 << 15)
-
-#define CCM_CCSR_CLKMODE1 (1 << 9)
-#define CCM_CCSR_CLKMODE0 (1 << 8)
-
-#define CCM_CCSR_CLKOSEL_OFFSET 0
-#define CCM_CCSR_CLKOSEL_MASK 0x1f
-
-#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */
-#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
-
-static int _clk_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
- return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long _clk_generic_round_rate(struct clk *clk,
- unsigned long rate,
- u32 max_divisor)
-{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > max_divisor)
- div = max_divisor;
-
- return parent_rate / div;
-}
-
-static int _clk_spll_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(CCM_CSCR);
- reg |= CCM_CSCR_SPEN;
- __raw_writel(reg, CCM_CSCR);
-
- while ((__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF) == 0)
- ;
- return 0;
-}
-
-static void _clk_spll_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(CCM_CSCR);
- reg &= ~CCM_CSCR_SPEN;
- __raw_writel(reg, CCM_CSCR);
-}
-
-
-#define CSCR() (__raw_readl(CCM_CSCR))
-#define PCDR0() (__raw_readl(CCM_PCDR0))
-#define PCDR1() (__raw_readl(CCM_PCDR1))
-
-static unsigned long _clk_perclkx_round_rate(struct clk *clk,
- unsigned long rate)
-{
- return _clk_generic_round_rate(clk, rate, 64);
-}
-
-static int _clk_perclkx_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->id < 0 || clk->id > 3)
- return -EINVAL;
-
- div = parent_rate / rate;
- if (div > 64 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
- div--;
-
- reg =
- __raw_readl(CCM_PCDR1) & ~(CCM_PCDR1_PERDIV1_MASK <<
- (clk->id << 3));
- reg |= div << (clk->id << 3);
- __raw_writel(reg, CCM_PCDR1);
-
- return 0;
-}
-
-static unsigned long _clk_usb_recalc(struct clk *clk)
-{
- unsigned long usb_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- usb_pdf = (CSCR() & CCM_CSCR_USB_MASK) >> CCM_CSCR_USB_OFFSET;
-
- return parent_rate / (usb_pdf + 1U);
-}
-
-static unsigned long _clk_usb_round_rate(struct clk *clk,
- unsigned long rate)
-{
- return _clk_generic_round_rate(clk, rate, 8);
-}
-
-static int _clk_usb_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (div > 8 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
- div--;
-
- reg = CSCR() & ~CCM_CSCR_USB_MASK;
- reg |= div << CCM_CSCR_USB_OFFSET;
- __raw_writel(reg, CCM_CSCR);
-
- return 0;
-}
-
-static unsigned long _clk_ssix_recalc(struct clk *clk, unsigned long pdf)
-{
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */
-
- return 2UL * parent_rate / pdf;
-}
-
-static unsigned long _clk_ssi1_recalc(struct clk *clk)
-{
- return _clk_ssix_recalc(clk,
- (PCDR0() & CCM_PCDR0_SSI1BAUDDIV_MASK)
- >> CCM_PCDR0_SSI1BAUDDIV_OFFSET);
-}
-
-static unsigned long _clk_ssi2_recalc(struct clk *clk)
-{
- return _clk_ssix_recalc(clk,
- (PCDR0() & CCM_PCDR0_SSI2BAUDDIV_MASK) >>
- CCM_PCDR0_SSI2BAUDDIV_OFFSET);
-}
-
-static unsigned long _clk_nfc_recalc(struct clk *clk)
-{
- unsigned long nfc_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- nfc_pdf = (PCDR0() & CCM_PCDR0_NFCDIV_MASK)
- >> CCM_PCDR0_NFCDIV_OFFSET;
-
- return parent_rate / (nfc_pdf + 1);
-}
-
-static unsigned long _clk_parent_round_rate(struct clk *clk, unsigned long rate)
-{
- return clk->parent->round_rate(clk->parent, rate);
-}
-
-static int _clk_parent_set_rate(struct clk *clk, unsigned long rate)
-{
- return clk->parent->set_rate(clk->parent, rate);
-}
-
-static unsigned long external_high_reference; /* in Hz */
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
- return external_high_reference;
-}
-
-/*
- * the high frequency external clock reference
- * Default case is 26MHz.
- */
-static struct clk ckih_clk = {
- .get_rate = get_high_reference_clock_rate,
-};
-
-static unsigned long external_low_reference; /* in Hz */
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
- return external_low_reference;
-}
-
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz.
- */
-static struct clk ckil_clk = {
- .get_rate = get_low_reference_clock_rate,
-};
-
-
-static unsigned long _clk_fpm_recalc(struct clk *clk)
-{
- return clk_get_rate(clk->parent) * 512;
-}
-
-/* Output of frequency pre multiplier */
-static struct clk fpm_clk = {
- .parent = &ckil_clk,
- .get_rate = _clk_fpm_recalc,
-};
-
-static unsigned long get_mpll_clk(struct clk *clk)
-{
- uint32_t reg;
- unsigned long ref_clk;
- unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
- unsigned long long temp;
-
- ref_clk = clk_get_rate(clk->parent);
-
- reg = __raw_readl(CCM_MPCTL0);
- pdf = (reg & CCM_MPCTL0_PD_MASK) >> CCM_MPCTL0_PD_OFFSET;
- mfd = (reg & CCM_MPCTL0_MFD_MASK) >> CCM_MPCTL0_MFD_OFFSET;
- mfi = (reg & CCM_MPCTL0_MFI_MASK) >> CCM_MPCTL0_MFI_OFFSET;
- mfn = (reg & CCM_MPCTL0_MFN_MASK) >> CCM_MPCTL0_MFN_OFFSET;
-
- mfi = (mfi <= 5) ? 5 : mfi;
- temp = 2LL * ref_clk * mfn;
- do_div(temp, mfd + 1);
- temp = 2LL * ref_clk * mfi + temp;
- do_div(temp, pdf + 1);
-
- return (unsigned long)temp;
-}
-
-static struct clk mpll_clk = {
- .parent = &ckih_clk,
- .get_rate = get_mpll_clk,
-};
-
-static unsigned long _clk_fclk_get_rate(struct clk *clk)
-{
- unsigned long parent_rate;
- u32 div;
-
- div = (CSCR() & CCM_CSCR_PRESC_MASK) >> CCM_CSCR_PRESC_OFFSET;
- parent_rate = clk_get_rate(clk->parent);
-
- return parent_rate / (div+1);
-}
-
-static struct clk fclk_clk = {
- .parent = &mpll_clk,
- .get_rate = _clk_fclk_get_rate
-};
-
-static unsigned long get_spll_clk(struct clk *clk)
-{
- uint32_t reg;
- unsigned long ref_clk;
- unsigned long mfi = 0, mfn = 0, mfd = 0, pdf = 0;
- unsigned long long temp;
-
- ref_clk = clk_get_rate(clk->parent);
-
- reg = __raw_readl(CCM_SPCTL0);
- pdf = (reg & CCM_SPCTL0_PD_MASK) >> CCM_SPCTL0_PD_OFFSET;
- mfd = (reg & CCM_SPCTL0_MFD_MASK) >> CCM_SPCTL0_MFD_OFFSET;
- mfi = (reg & CCM_SPCTL0_MFI_MASK) >> CCM_SPCTL0_MFI_OFFSET;
- mfn = (reg & CCM_SPCTL0_MFN_MASK) >> CCM_SPCTL0_MFN_OFFSET;
-
- mfi = (mfi <= 5) ? 5 : mfi;
- temp = 2LL * ref_clk * mfn;
- do_div(temp, mfd + 1);
- temp = 2LL * ref_clk * mfi + temp;
- do_div(temp, pdf + 1);
-
- return (unsigned long)temp;
-}
-
-static struct clk spll_clk = {
- .parent = &ckih_clk,
- .get_rate = get_spll_clk,
- .enable = _clk_spll_enable,
- .disable = _clk_spll_disable,
-};
-
-static unsigned long get_hclk_clk(struct clk *clk)
-{
- unsigned long rate;
- unsigned long bclk_pdf;
-
- bclk_pdf = (CSCR() & CCM_CSCR_BCLK_MASK)
- >> CCM_CSCR_BCLK_OFFSET;
-
- rate = clk_get_rate(clk->parent);
- return rate / (bclk_pdf + 1);
-}
-
-static struct clk hclk_clk = {
- .parent = &fclk_clk,
- .get_rate = get_hclk_clk,
-};
-
-static unsigned long get_ipg_clk(struct clk *clk)
-{
- unsigned long rate;
- unsigned long ipg_pdf;
-
- ipg_pdf = (CSCR() & CCM_CSCR_IPDIV) >> CCM_CSCR_IPDIV_OFFSET;
-
- rate = clk_get_rate(clk->parent);
- return rate / (ipg_pdf + 1);
-}
-
-static struct clk ipg_clk = {
- .parent = &hclk_clk,
- .get_rate = get_ipg_clk,
-};
-
-static unsigned long _clk_perclkx_recalc(struct clk *clk)
-{
- unsigned long perclk_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->id < 0 || clk->id > 3)
- return 0;
-
- perclk_pdf = (PCDR1() >> (clk->id << 3)) & CCM_PCDR1_PERDIV1_MASK;
-
- return parent_rate / (perclk_pdf + 1);
-}
-
-static struct clk per_clk[] = {
- {
- .id = 0,
- .parent = &mpll_clk,
- .get_rate = _clk_perclkx_recalc,
- }, {
- .id = 1,
- .parent = &mpll_clk,
- .get_rate = _clk_perclkx_recalc,
- }, {
- .id = 2,
- .parent = &mpll_clk,
- .round_rate = _clk_perclkx_round_rate,
- .set_rate = _clk_perclkx_set_rate,
- .get_rate = _clk_perclkx_recalc,
- /* Enable/Disable done via lcd_clkc[1] */
- }, {
- .id = 3,
- .parent = &mpll_clk,
- .round_rate = _clk_perclkx_round_rate,
- .set_rate = _clk_perclkx_set_rate,
- .get_rate = _clk_perclkx_recalc,
- /* Enable/Disable done via csi_clk[1] */
- },
-};
-
-static struct clk uart_ipg_clk[];
-
-static struct clk uart_clk[] = {
- {
- .id = 0,
- .parent = &per_clk[0],
- .secondary = &uart_ipg_clk[0],
- }, {
- .id = 1,
- .parent = &per_clk[0],
- .secondary = &uart_ipg_clk[1],
- }, {
- .id = 2,
- .parent = &per_clk[0],
- .secondary = &uart_ipg_clk[2],
- }, {
- .id = 3,
- .parent = &per_clk[0],
- .secondary = &uart_ipg_clk[3],
- },
-};
-
-static struct clk uart_ipg_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_UART1_REG,
- .enable_shift = CCM_PCCR_UART1_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_UART2_REG,
- .enable_shift = CCM_PCCR_UART2_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_UART3_REG,
- .enable_shift = CCM_PCCR_UART3_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 3,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_UART4_REG,
- .enable_shift = CCM_PCCR_UART4_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk gpt_ipg_clk[];
-
-static struct clk gpt_clk[] = {
- {
- .id = 0,
- .parent = &per_clk[0],
- .secondary = &gpt_ipg_clk[0],
- }, {
- .id = 1,
- .parent = &per_clk[0],
- .secondary = &gpt_ipg_clk[1],
- }, {
- .id = 2,
- .parent = &per_clk[0],
- .secondary = &gpt_ipg_clk[2],
- },
-};
-
-static struct clk gpt_ipg_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_GPT1_REG,
- .enable_shift = CCM_PCCR_GPT1_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_GPT2_REG,
- .enable_shift = CCM_PCCR_GPT2_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 2,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_GPT3_REG,
- .enable_shift = CCM_PCCR_GPT3_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk pwm_clk[] = {
- {
- .parent = &per_clk[0],
- .secondary = &pwm_clk[1],
- }, {
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_PWM_REG,
- .enable_shift = CCM_PCCR_PWM_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk sdhc_ipg_clk[];
-
-static struct clk sdhc_clk[] = {
- {
- .id = 0,
- .parent = &per_clk[1],
- .secondary = &sdhc_ipg_clk[0],
- }, {
- .id = 1,
- .parent = &per_clk[1],
- .secondary = &sdhc_ipg_clk[1],
- },
-};
-
-static struct clk sdhc_ipg_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SDHC1_REG,
- .enable_shift = CCM_PCCR_SDHC1_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SDHC2_REG,
- .enable_shift = CCM_PCCR_SDHC2_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk cspi_ipg_clk[];
-
-static struct clk cspi_clk[] = {
- {
- .id = 0,
- .parent = &per_clk[1],
- .secondary = &cspi_ipg_clk[0],
- }, {
- .id = 1,
- .parent = &per_clk[1],
- .secondary = &cspi_ipg_clk[1],
- }, {
- .id = 2,
- .parent = &per_clk[1],
- .secondary = &cspi_ipg_clk[2],
- },
-};
-
-static struct clk cspi_ipg_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_CSPI1_REG,
- .enable_shift = CCM_PCCR_CSPI1_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_CSPI2_REG,
- .enable_shift = CCM_PCCR_CSPI2_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 3,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_CSPI3_REG,
- .enable_shift = CCM_PCCR_CSPI3_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk lcdc_clk[] = {
- {
- .parent = &per_clk[2],
- .secondary = &lcdc_clk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- }, {
- .parent = &ipg_clk,
- .secondary = &lcdc_clk[2],
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_LCDC_REG,
- .enable_shift = CCM_PCCR_LCDC_OFFSET,
- .disable = _clk_disable,
- }, {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_LCDC_REG,
- .enable_shift = CCM_PCCR_HCLK_LCDC_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk csi_clk[] = {
- {
- .parent = &per_clk[3],
- .secondary = &csi_clk[1],
- .round_rate = _clk_parent_round_rate,
- .set_rate = _clk_parent_set_rate,
- }, {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_CSI_REG,
- .enable_shift = CCM_PCCR_HCLK_CSI_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk usb_clk[] = {
- {
- .parent = &spll_clk,
- .secondary = &usb_clk[1],
- .get_rate = _clk_usb_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_USBOTG_REG,
- .enable_shift = CCM_PCCR_USBOTG_OFFSET,
- .disable = _clk_disable,
- .round_rate = _clk_usb_round_rate,
- .set_rate = _clk_usb_set_rate,
- }, {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_USBOTG_REG,
- .enable_shift = CCM_PCCR_HCLK_USBOTG_OFFSET,
- .disable = _clk_disable,
- }
-};
-
-static struct clk ssi_ipg_clk[];
-
-static struct clk ssi_clk[] = {
- {
- .id = 0,
- .parent = &mpll_clk,
- .secondary = &ssi_ipg_clk[0],
- .get_rate = _clk_ssi1_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SSI1_BAUD_REG,
- .enable_shift = CCM_PCCR_SSI1_BAUD_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 1,
- .parent = &mpll_clk,
- .secondary = &ssi_ipg_clk[1],
- .get_rate = _clk_ssi2_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SSI2_BAUD_REG,
- .enable_shift = CCM_PCCR_SSI2_BAUD_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk ssi_ipg_clk[] = {
- {
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SSI1_REG,
- .enable_shift = CCM_PCCR_SSI1_IPG_OFFSET,
- .disable = _clk_disable,
- }, {
- .id = 1,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SSI2_REG,
- .enable_shift = CCM_PCCR_SSI2_IPG_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-
-static struct clk nfc_clk = {
- .parent = &fclk_clk,
- .get_rate = _clk_nfc_recalc,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_NFC_REG,
- .enable_shift = CCM_PCCR_NFC_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk dma_clk[] = {
- {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_DMA_REG,
- .enable_shift = CCM_PCCR_DMA_OFFSET,
- .disable = _clk_disable,
- .secondary = &dma_clk[1],
- }, {
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_DMA_REG,
- .enable_shift = CCM_PCCR_HCLK_DMA_OFFSET,
- .disable = _clk_disable,
- },
-};
-
-static struct clk brom_clk = {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_BROM_REG,
- .enable_shift = CCM_PCCR_HCLK_BROM_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk emma_clk[] = {
- {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_EMMA_REG,
- .enable_shift = CCM_PCCR_EMMA_OFFSET,
- .disable = _clk_disable,
- .secondary = &emma_clk[1],
- }, {
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_EMMA_REG,
- .enable_shift = CCM_PCCR_HCLK_EMMA_OFFSET,
- .disable = _clk_disable,
- }
-};
-
-static struct clk slcdc_clk[] = {
- {
- .parent = &hclk_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_SLCDC_REG,
- .enable_shift = CCM_PCCR_SLCDC_OFFSET,
- .disable = _clk_disable,
- .secondary = &slcdc_clk[1],
- }, {
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_HCLK_SLCDC_REG,
- .enable_shift = CCM_PCCR_HCLK_SLCDC_OFFSET,
- .disable = _clk_disable,
- }
-};
-
-static struct clk wdog_clk = {
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_WDT_REG,
- .enable_shift = CCM_PCCR_WDT_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk gpio_clk = {
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_GPIO_REG,
- .enable_shift = CCM_PCCR_GPIO_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk i2c_clk = {
- .id = 0,
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_I2C1_REG,
- .enable_shift = CCM_PCCR_I2C1_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk kpp_clk = {
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_KPP_REG,
- .enable_shift = CCM_PCCR_KPP_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk owire_clk = {
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_OWIRE_REG,
- .enable_shift = CCM_PCCR_OWIRE_OFFSET,
- .disable = _clk_disable,
-};
-
-static struct clk rtc_clk = {
- .parent = &ipg_clk,
- .enable = _clk_enable,
- .enable_reg = CCM_PCCR_RTC_REG,
- .enable_shift = CCM_PCCR_RTC_OFFSET,
- .disable = _clk_disable,
-};
-
-static unsigned long _clk_clko_round_rate(struct clk *clk, unsigned long rate)
-{
- return _clk_generic_round_rate(clk, rate, 8);
-}
-
-static int _clk_clko_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 8 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
- div--;
-
- reg = __raw_readl(CCM_PCDR0);
-
- if (clk->parent == &usb_clk[0]) {
- reg &= ~CCM_PCDR0_48MDIV_MASK;
- reg |= div << CCM_PCDR0_48MDIV_OFFSET;
- }
- __raw_writel(reg, CCM_PCDR0);
-
- return 0;
-}
-
-static unsigned long _clk_clko_recalc(struct clk *clk)
-{
- u32 div = 0;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->parent == &usb_clk[0]) /* 48M */
- div = __raw_readl(CCM_PCDR0) & CCM_PCDR0_48MDIV_MASK
- >> CCM_PCDR0_48MDIV_OFFSET;
- div++;
-
- return parent_rate / div;
-}
-
-static struct clk clko_clk;
-
-static int _clk_clko_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(CCM_CCSR) & ~CCM_CCSR_CLKOSEL_MASK;
-
- if (parent == &ckil_clk)
- reg |= 0 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &fpm_clk)
- reg |= 1 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ckih_clk)
- reg |= 2 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == mpll_clk.parent)
- reg |= 3 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == spll_clk.parent)
- reg |= 4 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &mpll_clk)
- reg |= 5 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &spll_clk)
- reg |= 6 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &fclk_clk)
- reg |= 7 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &hclk_clk)
- reg |= 8 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ipg_clk)
- reg |= 9 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[0])
- reg |= 0xA << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[1])
- reg |= 0xB << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[2])
- reg |= 0xC << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &per_clk[3])
- reg |= 0xD << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ssi_clk[0])
- reg |= 0xE << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &ssi_clk[1])
- reg |= 0xF << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &nfc_clk)
- reg |= 0x10 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &usb_clk[0])
- reg |= 0x14 << CCM_CCSR_CLKOSEL_OFFSET;
- else if (parent == &clko_clk)
- reg |= 0x15 << CCM_CCSR_CLKOSEL_OFFSET;
- else
- return -EINVAL;
-
- __raw_writel(reg, CCM_CCSR);
-
- return 0;
-}
-
-static struct clk clko_clk = {
- .get_rate = _clk_clko_recalc,
- .set_rate = _clk_clko_set_rate,
- .round_rate = _clk_clko_round_rate,
- .set_parent = _clk_clko_set_parent,
-};
-
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-static struct clk_lookup lookups[] = {
-/* It's unlikely that any driver wants one of them directly:
- _REGISTER_CLOCK(NULL, "ckih", ckih_clk)
- _REGISTER_CLOCK(NULL, "ckil", ckil_clk)
- _REGISTER_CLOCK(NULL, "fpm", fpm_clk)
- _REGISTER_CLOCK(NULL, "mpll", mpll_clk)
- _REGISTER_CLOCK(NULL, "spll", spll_clk)
- _REGISTER_CLOCK(NULL, "fclk", fclk_clk)
- _REGISTER_CLOCK(NULL, "hclk", hclk_clk)
- _REGISTER_CLOCK(NULL, "ipg", ipg_clk)
-*/
- _REGISTER_CLOCK(NULL, "perclk1", per_clk[0])
- _REGISTER_CLOCK(NULL, "perclk2", per_clk[1])
- _REGISTER_CLOCK(NULL, "perclk3", per_clk[2])
- _REGISTER_CLOCK(NULL, "perclk4", per_clk[3])
- _REGISTER_CLOCK(NULL, "clko", clko_clk)
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart_clk[0])
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart_clk[1])
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart_clk[2])
- _REGISTER_CLOCK("imx21-uart.3", NULL, uart_clk[3])
- _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0])
- _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1])
- _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2])
- _REGISTER_CLOCK(NULL, "pwm", pwm_clk[0])
- _REGISTER_CLOCK(NULL, "sdhc1", sdhc_clk[0])
- _REGISTER_CLOCK(NULL, "sdhc2", sdhc_clk[1])
- _REGISTER_CLOCK("imx21-cspi.0", NULL, cspi_clk[0])
- _REGISTER_CLOCK("imx21-cspi.1", NULL, cspi_clk[1])
- _REGISTER_CLOCK("imx21-cspi.2", NULL, cspi_clk[2])
- _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk[0])
- _REGISTER_CLOCK(NULL, "csi", csi_clk[0])
- _REGISTER_CLOCK("imx21-hcd.0", NULL, usb_clk[0])
- _REGISTER_CLOCK(NULL, "ssi1", ssi_clk[0])
- _REGISTER_CLOCK(NULL, "ssi2", ssi_clk[1])
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
- _REGISTER_CLOCK(NULL, "dma", dma_clk[0])
- _REGISTER_CLOCK(NULL, "brom", brom_clk)
- _REGISTER_CLOCK(NULL, "emma", emma_clk[0])
- _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk[0])
- _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
- _REGISTER_CLOCK(NULL, "gpio", gpio_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
- _REGISTER_CLOCK("mxc-keypad", NULL, kpp_clk)
- _REGISTER_CLOCK(NULL, "owire", owire_clk)
- _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
-};
-
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
-int __init mx21_clocks_init(unsigned long lref, unsigned long href)
-{
- u32 cscr;
-
- external_low_reference = lref;
- external_high_reference = href;
-
- /* detect clock reference for both system PLL */
- cscr = CSCR();
- if (cscr & CCM_CSCR_MCU)
- mpll_clk.parent = &ckih_clk;
- else
- mpll_clk.parent = &fpm_clk;
-
- if (cscr & CCM_CSCR_SP)
- spll_clk.parent = &ckih_clk;
- else
- spll_clk.parent = &fpm_clk;
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /* Turn off all clock gates */
- __raw_writel(0, CCM_PCCR0);
- __raw_writel(CCM_PCCR_GPT1_MASK, CCM_PCCR1);
-
- /* This turns of the serial PLL as well */
- spll_clk.disable(&spll_clk);
-
- /* This will propagate to all children and init all the clock rates. */
- clk_enable(&per_clk[0]);
- clk_enable(&gpio_clk);
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
- clk_enable(&uart_clk[0]);
-#endif
-
- mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
- MX21_INT_GPT1);
- return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c
deleted file mode 100644
index b0fec74c8c91..000000000000
--- a/arch/arm/mach-imx/clock-imx25.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * Copyright (C) 2009 by Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/mx25.h>
-
-#define CRM_BASE MX25_IO_ADDRESS(MX25_CRM_BASE_ADDR)
-
-#define CCM_MPCTL 0x00
-#define CCM_UPCTL 0x04
-#define CCM_CCTL 0x08
-#define CCM_CGCR0 0x0C
-#define CCM_CGCR1 0x10
-#define CCM_CGCR2 0x14
-#define CCM_PCDR0 0x18
-#define CCM_PCDR1 0x1C
-#define CCM_PCDR2 0x20
-#define CCM_PCDR3 0x24
-#define CCM_RCSR 0x28
-#define CCM_CRDR 0x2C
-#define CCM_DCVR0 0x30
-#define CCM_DCVR1 0x34
-#define CCM_DCVR2 0x38
-#define CCM_DCVR3 0x3c
-#define CCM_LTR0 0x40
-#define CCM_LTR1 0x44
-#define CCM_LTR2 0x48
-#define CCM_LTR3 0x4c
-
-static unsigned long get_rate_mpll(void)
-{
- ulong mpctl = __raw_readl(CRM_BASE + CCM_MPCTL);
-
- return mxc_decode_pll(mpctl, 24000000);
-}
-
-static unsigned long get_rate_upll(void)
-{
- ulong mpctl = __raw_readl(CRM_BASE + CCM_UPCTL);
-
- return mxc_decode_pll(mpctl, 24000000);
-}
-
-unsigned long get_rate_arm(struct clk *clk)
-{
- unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
- unsigned long rate = get_rate_mpll();
-
- if (cctl & (1 << 14))
- rate = (rate * 3) >> 2;
-
- return rate / ((cctl >> 30) + 1);
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
- unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
-
- return get_rate_arm(NULL) / (((cctl >> 28) & 0x3) + 1);
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
- return get_rate_ahb(NULL) >> 1;
-}
-
-static unsigned long get_rate_per(int per)
-{
- unsigned long ofs = (per & 0x3) * 8;
- unsigned long reg = per & ~0x3;
- unsigned long val = (readl(CRM_BASE + CCM_PCDR0 + reg) >> ofs) & 0x3f;
- unsigned long fref;
-
- if (readl(CRM_BASE + 0x64) & (1 << per))
- fref = get_rate_upll();
- else
- fref = get_rate_ahb(NULL);
-
- return fref / (val + 1);
-}
-
-static unsigned long get_rate_uart(struct clk *clk)
-{
- return get_rate_per(15);
-}
-
-static unsigned long get_rate_ssi2(struct clk *clk)
-{
- return get_rate_per(14);
-}
-
-static unsigned long get_rate_ssi1(struct clk *clk)
-{
- return get_rate_per(13);
-}
-
-static unsigned long get_rate_i2c(struct clk *clk)
-{
- return get_rate_per(6);
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
- return get_rate_per(8);
-}
-
-static unsigned long get_rate_gpt(struct clk *clk)
-{
- return get_rate_per(5);
-}
-
-static unsigned long get_rate_lcdc(struct clk *clk)
-{
- return get_rate_per(7);
-}
-
-static unsigned long get_rate_esdhc1(struct clk *clk)
-{
- return get_rate_per(3);
-}
-
-static unsigned long get_rate_esdhc2(struct clk *clk)
-{
- return get_rate_per(4);
-}
-
-static unsigned long get_rate_csi(struct clk *clk)
-{
- return get_rate_per(0);
-}
-
-static unsigned long get_rate_otg(struct clk *clk)
-{
- unsigned long cctl = readl(CRM_BASE + CCM_CCTL);
- unsigned long rate = get_rate_upll();
-
- return (cctl & (1 << 23)) ? 0 : rate / ((0x3F & (cctl >> 16)) + 1);
-}
-
-static int clk_cgcr_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void clk_cgcr_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, s) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = CRM_BASE + er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .set_rate = sr, \
- .enable = clk_cgcr_enable, \
- .disable = clk_cgcr_disable, \
- .secondary = s, \
- }
-
-/*
- * Note: the following IPG clock gating bits are wrongly marked "Reserved" in
- * the i.MX25 Reference Manual Rev 1, table 15-13. The information below is
- * taken from the Freescale released BSP.
- *
- * bit reg offset clock
- *
- * 0 CGCR1 0 AUDMUX
- * 12 CGCR1 12 ESAI
- * 16 CGCR1 16 GPIO1
- * 17 CGCR1 17 GPIO2
- * 18 CGCR1 18 GPIO3
- * 23 CGCR1 23 I2C1
- * 24 CGCR1 24 I2C2
- * 25 CGCR1 25 I2C3
- * 27 CGCR1 27 IOMUXC
- * 28 CGCR1 28 KPP
- * 30 CGCR1 30 OWIRE
- * 36 CGCR2 4 RTIC
- * 51 CGCR2 19 WDOG
- */
-
-DEFINE_CLOCK(gpt_clk, 0, CCM_CGCR0, 5, get_rate_gpt, NULL, NULL);
-DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
-DEFINE_CLOCK(ssi1_per_clk, 0, CCM_CGCR0, 13, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(ssi2_per_clk, 0, CCM_CGCR0, 14, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(esdhc1_ahb_clk, 0, CCM_CGCR0, 21, get_rate_esdhc1, NULL, NULL);
-DEFINE_CLOCK(esdhc1_per_clk, 0, CCM_CGCR0, 3, get_rate_esdhc1, NULL,
- &esdhc1_ahb_clk);
-DEFINE_CLOCK(esdhc2_ahb_clk, 0, CCM_CGCR0, 22, get_rate_esdhc2, NULL, NULL);
-DEFINE_CLOCK(esdhc2_per_clk, 0, CCM_CGCR0, 4, get_rate_esdhc2, NULL,
- &esdhc2_ahb_clk);
-DEFINE_CLOCK(sdma_ahb_clk, 0, CCM_CGCR0, 26, NULL, NULL, NULL);
-DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL);
-DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL);
-DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk);
-DEFINE_CLOCK(csi_ahb_clk, 0, CCM_CGCR0, 18, get_rate_csi, NULL, NULL);
-DEFINE_CLOCK(csi_per_clk, 0, CCM_CGCR0, 0, get_rate_csi, NULL, &csi_ahb_clk);
-DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart4_clk, 0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(uart5_clk, 0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
-DEFINE_CLOCK(nfc_clk, 0, CCM_CGCR0, 8, get_rate_nfc, NULL, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
-DEFINE_CLOCK(pwm1_clk, 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm2_clk, 0, CCM_CGCR2, 0, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm3_clk, 0, CCM_CGCR2, 1, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(pwm4_clk, 0, CCM_CGCR2, 2, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL);
-DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
-DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1, 8, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
-DEFINE_CLOCK(wdt_clk, 0, CCM_CGCR2, 19, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(ssi1_clk, 0, CCM_CGCR2, 11, get_rate_ssi1, NULL, &ssi1_per_clk);
-DEFINE_CLOCK(ssi2_clk, 1, CCM_CGCR2, 12, get_rate_ssi2, NULL, &ssi2_per_clk);
-DEFINE_CLOCK(sdma_clk, 0, CCM_CGCR2, 6, get_rate_ipg, NULL, &sdma_ahb_clk);
-DEFINE_CLOCK(esdhc1_clk, 0, CCM_CGCR1, 13, get_rate_esdhc1, NULL,
- &esdhc1_per_clk);
-DEFINE_CLOCK(esdhc2_clk, 1, CCM_CGCR1, 14, get_rate_esdhc2, NULL,
- &esdhc2_per_clk);
-DEFINE_CLOCK(audmux_clk, 0, CCM_CGCR1, 0, NULL, NULL, NULL);
-DEFINE_CLOCK(csi_clk, 0, CCM_CGCR1, 4, get_rate_csi, NULL, &csi_per_clk);
-DEFINE_CLOCK(can1_clk, 0, CCM_CGCR1, 2, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL);
-DEFINE_CLOCK(iim_clk, 0, CCM_CGCR1, 26, NULL, NULL, NULL);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- /* i.mx25 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
- /* i.mx25 has the i.mx35 type cspi */
- _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
- _REGISTER_CLOCK("imx35-cspi.2", NULL, cspi3_clk)
- _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk)
- _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk)
- _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk)
- _REGISTER_CLOCK("mxc_pwm.3", NULL, pwm4_clk)
- _REGISTER_CLOCK("imx-keypad", NULL, kpp_clk)
- _REGISTER_CLOCK("mx25-adc", NULL, tsc_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
- _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
- _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx25.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx25.1", NULL, esdhc2_clk)
- _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
- _REGISTER_CLOCK(NULL, "audmux", audmux_clk)
- _REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
- _REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
- /* i.mx25 has the i.mx35 type sdma */
- _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
- _REGISTER_CLOCK(NULL, "iim", iim_clk)
-};
-
-int __init mx25_clocks_init(void)
-{
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /* Turn off all clocks except the ones we need to survive, namely:
- * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
- * SCC
- */
- __raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
- __raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
- __raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
- clk_enable(&uart1_clk);
-#endif
-
- /* Clock source for lcdc and csi is upll */
- __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0),
- CRM_BASE + 0x64);
-
- /* Clock source for gpt is ahb_div */
- __raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX25", mx25_revision());
- clk_disable(&iim_clk);
-
- mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c
deleted file mode 100644
index 98e04f5a87dd..000000000000
--- a/arch/arm/mach-imx/clock-imx27.c
+++ /dev/null
@@ -1,785 +0,0 @@
-/*
- * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright 2008 Juergen Beisert, kernel@pengutronix.de
- * Copyright 2008 Martin Fuzzey, mfuzzey@gmail.com
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
-
-/* Register offsets */
-#define CCM_CSCR IO_ADDR_CCM(0x0)
-#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
-#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
-#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
-#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
-#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
-#define CCM_PCDR0 IO_ADDR_CCM(0x18)
-#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
-#define CCM_PCCR0 IO_ADDR_CCM(0x20)
-#define CCM_PCCR1 IO_ADDR_CCM(0x24)
-#define CCM_CCSR IO_ADDR_CCM(0x28)
-#define CCM_PMCTL IO_ADDR_CCM(0x2c)
-#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
-#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
-
-#define CCM_CSCR_UPDATE_DIS (1 << 31)
-#define CCM_CSCR_SSI2 (1 << 23)
-#define CCM_CSCR_SSI1 (1 << 22)
-#define CCM_CSCR_VPU (1 << 21)
-#define CCM_CSCR_MSHC (1 << 20)
-#define CCM_CSCR_SPLLRES (1 << 19)
-#define CCM_CSCR_MPLLRES (1 << 18)
-#define CCM_CSCR_SP (1 << 17)
-#define CCM_CSCR_MCU (1 << 16)
-#define CCM_CSCR_OSC26MDIV (1 << 4)
-#define CCM_CSCR_OSC26M (1 << 3)
-#define CCM_CSCR_FPM (1 << 2)
-#define CCM_CSCR_SPEN (1 << 1)
-#define CCM_CSCR_MPEN (1 << 0)
-
-/* i.MX27 TO 2+ */
-#define CCM_CSCR_ARM_SRC (1 << 15)
-
-#define CCM_SPCTL1_LF (1 << 15)
-#define CCM_SPCTL1_BRMO (1 << 6)
-
-static struct clk mpll_main1_clk, mpll_main2_clk;
-
-static int clk_pccr_enable(struct clk *clk)
-{
- unsigned long reg;
-
- if (!clk->enable_reg)
- return 0;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 1 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void clk_pccr_disable(struct clk *clk)
-{
- unsigned long reg;
-
- if (!clk->enable_reg)
- return;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(1 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-static int clk_spll_enable(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_CSCR);
- reg |= CCM_CSCR_SPEN;
- __raw_writel(reg, CCM_CSCR);
-
- while (!(__raw_readl(CCM_SPCTL1) & CCM_SPCTL1_LF));
-
- return 0;
-}
-
-static void clk_spll_disable(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(CCM_CSCR);
- reg &= ~CCM_CSCR_SPEN;
- __raw_writel(reg, CCM_CSCR);
-}
-
-static int clk_cpu_set_parent(struct clk *clk, struct clk *parent)
-{
- int cscr = __raw_readl(CCM_CSCR);
-
- if (clk->parent == parent)
- return 0;
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
- if (parent == &mpll_main1_clk) {
- cscr |= CCM_CSCR_ARM_SRC;
- } else {
- if (parent == &mpll_main2_clk)
- cscr &= ~CCM_CSCR_ARM_SRC;
- else
- return -EINVAL;
- }
- __raw_writel(cscr, CCM_CSCR);
- clk->parent = parent;
- return 0;
- }
- return -ENODEV;
-}
-
-static unsigned long round_rate_cpu(struct clk *clk, unsigned long rate)
-{
- int div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > 4)
- div = 4;
-
- return parent_rate / div;
-}
-
-static int set_rate_cpu(struct clk *clk, unsigned long rate)
-{
- unsigned int div;
- uint32_t reg;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
-
- if (div > 4 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- div--;
-
- reg = __raw_readl(CCM_CSCR);
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
- reg &= ~(3 << 12);
- reg |= div << 12;
- reg &= ~(CCM_CSCR_FPM | CCM_CSCR_SPEN);
- __raw_writel(reg | CCM_CSCR_UPDATE_DIS, CCM_CSCR);
- } else {
- printk(KERN_ERR "Can't set CPU frequency!\n");
- }
-
- return 0;
-}
-
-static unsigned long round_rate_per(struct clk *clk, unsigned long rate)
-{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (parent_rate % rate)
- div++;
-
- if (div > 64)
- div = 64;
-
- return parent_rate / div;
-}
-
-static int set_rate_per(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->id < 0 || clk->id > 3)
- return -EINVAL;
-
- div = parent_rate / rate;
- if (div > 64 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
- div--;
-
- reg = __raw_readl(CCM_PCDR1) & ~(0x3f << (clk->id << 3));
- reg |= div << (clk->id << 3);
- __raw_writel(reg, CCM_PCDR1);
-
- return 0;
-}
-
-static unsigned long get_rate_usb(struct clk *clk)
-{
- unsigned long usb_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- usb_pdf = (__raw_readl(CCM_CSCR) >> 28) & 0x7;
-
- return parent_rate / (usb_pdf + 1U);
-}
-
-static unsigned long get_rate_ssix(struct clk *clk, unsigned long pdf)
-{
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- pdf += 4; /* MX27 TO2+ */
- else
- pdf = (pdf < 2) ? 124UL : pdf; /* MX21 & MX27 TO1 */
-
- return 2UL * parent_rate / pdf;
-}
-
-static unsigned long get_rate_ssi1(struct clk *clk)
-{
- return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 16) & 0x3f);
-}
-
-static unsigned long get_rate_ssi2(struct clk *clk)
-{
- return get_rate_ssix(clk, (__raw_readl(CCM_PCDR0) >> 26) & 0x3f);
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
- unsigned long nfc_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- nfc_pdf = (__raw_readl(CCM_PCDR0) >> 6) & 0xf;
- else
- nfc_pdf = (__raw_readl(CCM_PCDR0) >> 12) & 0xf;
-
- return parent_rate / (nfc_pdf + 1);
-}
-
-static unsigned long get_rate_vpu(struct clk *clk)
-{
- unsigned long vpu_pdf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
- vpu_pdf = (__raw_readl(CCM_PCDR0) >> 10) & 0x3f;
- vpu_pdf += 4;
- } else {
- vpu_pdf = (__raw_readl(CCM_PCDR0) >> 8) & 0xf;
- vpu_pdf = (vpu_pdf < 2) ? 124 : vpu_pdf;
- }
-
- return 2UL * parent_rate / vpu_pdf;
-}
-
-static unsigned long round_rate_parent(struct clk *clk, unsigned long rate)
-{
- return clk->parent->round_rate(clk->parent, rate);
-}
-
-static unsigned long get_rate_parent(struct clk *clk)
-{
- return clk_get_rate(clk->parent);
-}
-
-static int set_rate_parent(struct clk *clk, unsigned long rate)
-{
- return clk->parent->set_rate(clk->parent, rate);
-}
-
-/* in Hz */
-static unsigned long external_high_reference = 26000000;
-
-static unsigned long get_rate_high_reference(struct clk *clk)
-{
- return external_high_reference;
-}
-
-/* in Hz */
-static unsigned long external_low_reference = 32768;
-
-static unsigned long get_rate_low_reference(struct clk *clk)
-{
- return external_low_reference;
-}
-
-static unsigned long get_rate_fpm(struct clk *clk)
-{
- return clk_get_rate(clk->parent) * 1024;
-}
-
-static unsigned long get_rate_mpll(struct clk *clk)
-{
- return mxc_decode_pll(__raw_readl(CCM_MPCTL0),
- clk_get_rate(clk->parent));
-}
-
-static unsigned long get_rate_mpll_main(struct clk *clk)
-{
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- /* i.MX27 TO2:
- * clk->id == 0: arm clock source path 1 which is from 2 * MPLL / 2
- * clk->id == 1: arm clock source path 2 which is from 2 * MPLL / 3
- */
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0 && clk->id == 1)
- return 2UL * parent_rate / 3UL;
-
- return parent_rate;
-}
-
-static unsigned long get_rate_spll(struct clk *clk)
-{
- uint32_t reg;
- unsigned long rate;
-
- rate = clk_get_rate(clk->parent);
-
- reg = __raw_readl(CCM_SPCTL0);
-
- /* On TO2 we have to write the value back. Otherwise we
- * read 0 from this register the next time.
- */
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- __raw_writel(reg, CCM_SPCTL0);
-
- return mxc_decode_pll(reg, rate);
-}
-
-static unsigned long get_rate_cpu(struct clk *clk)
-{
- u32 div;
- unsigned long rate;
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- div = (__raw_readl(CCM_CSCR) >> 12) & 0x3;
- else
- div = (__raw_readl(CCM_CSCR) >> 13) & 0x7;
-
- rate = clk_get_rate(clk->parent);
- return rate / (div + 1);
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
- unsigned long rate, bclk_pdf;
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- bclk_pdf = (__raw_readl(CCM_CSCR) >> 8) & 0x3;
- else
- bclk_pdf = (__raw_readl(CCM_CSCR) >> 9) & 0xf;
-
- rate = clk_get_rate(clk->parent);
- return rate / (bclk_pdf + 1);
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
- unsigned long rate, ipg_pdf;
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0)
- return clk_get_rate(clk->parent);
- else
- ipg_pdf = (__raw_readl(CCM_CSCR) >> 8) & 1;
-
- rate = clk_get_rate(clk->parent);
- return rate / (ipg_pdf + 1);
-}
-
-static unsigned long get_rate_per(struct clk *clk)
-{
- unsigned long perclk_pdf, parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->id < 0 || clk->id > 3)
- return 0;
-
- perclk_pdf = (__raw_readl(CCM_PCDR1) >> (clk->id << 3)) & 0x3f;
-
- return parent_rate / (perclk_pdf + 1);
-}
-
-/*
- * the high frequency external clock reference
- * Default case is 26MHz. Could be changed at runtime
- * with a call to change_external_high_reference()
- */
-static struct clk ckih_clk = {
- .get_rate = get_rate_high_reference,
-};
-
-static struct clk mpll_clk = {
- .parent = &ckih_clk,
- .get_rate = get_rate_mpll,
-};
-
-/* For i.MX27 TO2, it is the MPLL path 1 of ARM core
- * It provides the clock source whose rate is same as MPLL
- */
-static struct clk mpll_main1_clk = {
- .id = 0,
- .parent = &mpll_clk,
- .get_rate = get_rate_mpll_main,
-};
-
-/* For i.MX27 TO2, it is the MPLL path 2 of ARM core
- * It provides the clock source whose rate is same MPLL * 2 / 3
- */
-static struct clk mpll_main2_clk = {
- .id = 1,
- .parent = &mpll_clk,
- .get_rate = get_rate_mpll_main,
-};
-
-static struct clk ahb_clk = {
- .parent = &mpll_main2_clk,
- .get_rate = get_rate_ahb,
-};
-
-static struct clk ipg_clk = {
- .parent = &ahb_clk,
- .get_rate = get_rate_ipg,
-};
-
-static struct clk cpu_clk = {
- .parent = &mpll_main2_clk,
- .set_parent = clk_cpu_set_parent,
- .round_rate = round_rate_cpu,
- .get_rate = get_rate_cpu,
- .set_rate = set_rate_cpu,
-};
-
-static struct clk spll_clk = {
- .parent = &ckih_clk,
- .get_rate = get_rate_spll,
- .enable = clk_spll_enable,
- .disable = clk_spll_disable,
-};
-
-/*
- * the low frequency external clock reference
- * Default case is 32.768kHz.
- */
-static struct clk ckil_clk = {
- .get_rate = get_rate_low_reference,
-};
-
-/* Output of frequency pre multiplier */
-static struct clk fpm_clk = {
- .parent = &ckil_clk,
- .get_rate = get_rate_fpm,
-};
-
-#define PCCR0 CCM_PCCR0
-#define PCCR1 CCM_PCCR1
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .enable = clk_pccr_enable, \
- .disable = clk_pccr_disable, \
- .secondary = s, \
- .parent = p, \
- }
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = get_rate_##getsetround, \
- .set_rate = set_rate_##getsetround, \
- .round_rate = round_rate_##getsetround, \
- .enable = clk_pccr_enable, \
- .disable = clk_pccr_disable, \
- .secondary = s, \
- .parent = p, \
- }
-
-/* Forward declaration to keep the following list in order */
-static struct clk slcdc_clk1, sahara2_clk1, rtic_clk1, fec_clk1, emma_clk1,
- dma_clk1, lcdc_clk2, vpu_clk1;
-
-/* All clocks we can gate through PCCRx in the order of PCCRx bits */
-DEFINE_CLOCK(ssi2_clk1, 1, PCCR0, 0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ssi1_clk1, 0, PCCR0, 1, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(slcdc_clk, 0, PCCR0, 2, NULL, &slcdc_clk1, &ahb_clk);
-DEFINE_CLOCK(sdhc3_clk1, 0, PCCR0, 3, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdhc2_clk1, 0, PCCR0, 4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdhc1_clk1, 0, PCCR0, 5, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(scc_clk, 0, PCCR0, 6, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sahara2_clk, 0, PCCR0, 7, NULL, &sahara2_clk1, &ahb_clk);
-DEFINE_CLOCK(rtic_clk, 0, PCCR0, 8, NULL, &rtic_clk1, &ahb_clk);
-DEFINE_CLOCK(rtc_clk, 0, PCCR0, 9, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk1, 0, PCCR0, 11, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(owire_clk, 0, PCCR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mstick_clk1, 0, PCCR0, 13, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(lcdc_clk1, 0, PCCR0, 14, NULL, &lcdc_clk2, &ipg_clk);
-DEFINE_CLOCK(kpp_clk, 0, PCCR0, 15, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(iim_clk, 0, PCCR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(i2c2_clk, 1, PCCR0, 17, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(i2c1_clk, 0, PCCR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt6_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt5_clk1, 0, PCCR0, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt4_clk1, 0, PCCR0, 21, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt3_clk1, 0, PCCR0, 22, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt2_clk1, 0, PCCR0, 23, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpt1_clk1, 0, PCCR0, 24, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(gpio_clk, 0, PCCR0, 25, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(fec_clk, 0, PCCR0, 26, NULL, &fec_clk1, &ahb_clk);
-DEFINE_CLOCK(emma_clk, 0, PCCR0, 27, NULL, &emma_clk1, &ahb_clk);
-DEFINE_CLOCK(dma_clk, 0, PCCR0, 28, NULL, &dma_clk1, &ahb_clk);
-DEFINE_CLOCK(cspi13_clk1, 0, PCCR0, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk1, 0, PCCR0, 30, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi1_clk1, 0, PCCR0, 31, NULL, NULL, &ipg_clk);
-
-DEFINE_CLOCK(mstick_clk, 0, PCCR1, 2, NULL, &mstick_clk1, &ipg_clk);
-DEFINE_CLOCK(nfc_clk, 0, PCCR1, 3, get_rate_nfc, NULL, &cpu_clk);
-DEFINE_CLOCK(ssi2_clk, 1, PCCR1, 4, get_rate_ssi2, &ssi2_clk1, &mpll_main2_clk);
-DEFINE_CLOCK(ssi1_clk, 0, PCCR1, 5, get_rate_ssi1, &ssi1_clk1, &mpll_main2_clk);
-DEFINE_CLOCK(vpu_clk, 0, PCCR1, 6, get_rate_vpu, &vpu_clk1, &mpll_main2_clk);
-DEFINE_CLOCK1(per4_clk, 3, PCCR1, 7, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per3_clk, 2, PCCR1, 8, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per2_clk, 1, PCCR1, 9, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK1(per1_clk, 0, PCCR1, 10, per, NULL, &mpll_main2_clk);
-DEFINE_CLOCK(usb_clk1, 0, PCCR1, 11, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(slcdc_clk1, 0, PCCR1, 12, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(sahara2_clk1, 0, PCCR1, 13, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk1, 0, PCCR1, 14, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(lcdc_clk2, 0, PCCR1, 15, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(vpu_clk1, 0, PCCR1, 16, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(fec_clk1, 0, PCCR1, 17, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(emma_clk1, 0, PCCR1, 18, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk, 0, PCCR1, 19, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(dma_clk1, 0, PCCR1, 20, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(csi_clk1, 0, PCCR1, 21, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(brom_clk, 0, PCCR1, 22, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(pata_clk, 0, PCCR1, 23, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(wdog_clk, 0, PCCR1, 24, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk, 0, PCCR1, 25, get_rate_usb, &usb_clk1, &spll_clk);
-DEFINE_CLOCK(uart6_clk1, 0, PCCR1, 26, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart5_clk1, 0, PCCR1, 27, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart4_clk1, 0, PCCR1, 28, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart3_clk1, 0, PCCR1, 29, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart2_clk1, 0, PCCR1, 30, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk1, 0, PCCR1, 31, NULL, NULL, &ipg_clk);
-
-/* Clocks we cannot directly gate, but drivers need their rates */
-DEFINE_CLOCK(cspi1_clk, 0, NULL, 0, NULL, &cspi1_clk1, &per2_clk);
-DEFINE_CLOCK(cspi2_clk, 1, NULL, 0, NULL, &cspi2_clk1, &per2_clk);
-DEFINE_CLOCK(cspi3_clk, 2, NULL, 0, NULL, &cspi13_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc1_clk, 0, NULL, 0, NULL, &sdhc1_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc2_clk, 1, NULL, 0, NULL, &sdhc2_clk1, &per2_clk);
-DEFINE_CLOCK(sdhc3_clk, 2, NULL, 0, NULL, &sdhc3_clk1, &per2_clk);
-DEFINE_CLOCK(pwm_clk, 0, NULL, 0, NULL, &pwm_clk1, &per1_clk);
-DEFINE_CLOCK(gpt1_clk, 0, NULL, 0, NULL, &gpt1_clk1, &per1_clk);
-DEFINE_CLOCK(gpt2_clk, 1, NULL, 0, NULL, &gpt2_clk1, &per1_clk);
-DEFINE_CLOCK(gpt3_clk, 2, NULL, 0, NULL, &gpt3_clk1, &per1_clk);
-DEFINE_CLOCK(gpt4_clk, 3, NULL, 0, NULL, &gpt4_clk1, &per1_clk);
-DEFINE_CLOCK(gpt5_clk, 4, NULL, 0, NULL, &gpt5_clk1, &per1_clk);
-DEFINE_CLOCK(gpt6_clk, 5, NULL, 0, NULL, &gpt6_clk1, &per1_clk);
-DEFINE_CLOCK(uart1_clk, 0, NULL, 0, NULL, &uart1_clk1, &per1_clk);
-DEFINE_CLOCK(uart2_clk, 1, NULL, 0, NULL, &uart2_clk1, &per1_clk);
-DEFINE_CLOCK(uart3_clk, 2, NULL, 0, NULL, &uart3_clk1, &per1_clk);
-DEFINE_CLOCK(uart4_clk, 3, NULL, 0, NULL, &uart4_clk1, &per1_clk);
-DEFINE_CLOCK(uart5_clk, 4, NULL, 0, NULL, &uart5_clk1, &per1_clk);
-DEFINE_CLOCK(uart6_clk, 5, NULL, 0, NULL, &uart6_clk1, &per1_clk);
-DEFINE_CLOCK1(lcdc_clk, 0, NULL, 0, parent, &lcdc_clk1, &per3_clk);
-DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- /* i.mx27 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK("imx21-uart.5", NULL, uart6_clk)
- _REGISTER_CLOCK(NULL, "gpt1", gpt1_clk)
- _REGISTER_CLOCK(NULL, "gpt2", gpt2_clk)
- _REGISTER_CLOCK(NULL, "gpt3", gpt3_clk)
- _REGISTER_CLOCK(NULL, "gpt4", gpt4_clk)
- _REGISTER_CLOCK(NULL, "gpt5", gpt5_clk)
- _REGISTER_CLOCK(NULL, "gpt6", gpt6_clk)
- _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm_clk)
- _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
- _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
- _REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
- _REGISTER_CLOCK("imx27-cspi.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("imx27-cspi.1", NULL, cspi2_clk)
- _REGISTER_CLOCK("imx27-cspi.2", NULL, cspi3_clk)
- _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
- _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
- _REGISTER_CLOCK(NULL, "vpu", vpu_clk)
- _REGISTER_CLOCK(NULL, "dma", dma_clk)
- _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
- _REGISTER_CLOCK(NULL, "brom", brom_clk)
- _REGISTER_CLOCK(NULL, "emma", emma_clk)
- _REGISTER_CLOCK("m2m-emmaprp.0", NULL, emma_clk)
- _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk)
- _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK(NULL, "emi", emi_clk)
- _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
- _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
- _REGISTER_CLOCK(NULL, "mstick", mstick_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
- _REGISTER_CLOCK(NULL, "gpio", gpio_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK(NULL, "iim", iim_clk)
- _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
- _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
- _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
- _REGISTER_CLOCK(NULL, "scc", scc_clk)
-};
-
-/* Adjust the clock path for TO2 and later */
-static void __init to2_adjust_clocks(void)
-{
- unsigned long cscr = __raw_readl(CCM_CSCR);
-
- if (mx27_revision() >= IMX_CHIP_REVISION_2_0) {
- if (cscr & CCM_CSCR_ARM_SRC)
- cpu_clk.parent = &mpll_main1_clk;
-
- if (!(cscr & CCM_CSCR_SSI2))
- ssi1_clk.parent = &spll_clk;
-
- if (!(cscr & CCM_CSCR_SSI1))
- ssi1_clk.parent = &spll_clk;
-
- if (!(cscr & CCM_CSCR_VPU))
- vpu_clk.parent = &spll_clk;
- } else {
- cpu_clk.parent = &mpll_clk;
- cpu_clk.set_parent = NULL;
- cpu_clk.round_rate = NULL;
- cpu_clk.set_rate = NULL;
- ahb_clk.parent = &mpll_clk;
-
- per1_clk.parent = &mpll_clk;
- per2_clk.parent = &mpll_clk;
- per3_clk.parent = &mpll_clk;
- per4_clk.parent = &mpll_clk;
-
- ssi1_clk.parent = &mpll_clk;
- ssi2_clk.parent = &mpll_clk;
-
- vpu_clk.parent = &mpll_clk;
- }
-}
-
-/*
- * must be called very early to get information about the
- * available clock rate when the timer framework starts
- */
-int __init mx27_clocks_init(unsigned long fref)
-{
- u32 cscr = __raw_readl(CCM_CSCR);
-
- external_high_reference = fref;
-
- /* detect clock reference for both system PLLs */
- if (cscr & CCM_CSCR_MCU)
- mpll_clk.parent = &ckih_clk;
- else
- mpll_clk.parent = &fpm_clk;
-
- if (cscr & CCM_CSCR_SP)
- spll_clk.parent = &ckih_clk;
- else
- spll_clk.parent = &fpm_clk;
-
- to2_adjust_clocks();
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /* Turn off all clocks we do not need */
- __raw_writel(0, CCM_PCCR0);
- __raw_writel((1 << 10) | (1 << 19), CCM_PCCR1);
-
- spll_clk.disable(&spll_clk);
-
- /* enable basic clocks */
- clk_enable(&per1_clk);
- clk_enable(&gpio_clk);
- clk_enable(&emi_clk);
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX27", mx27_revision());
- clk_disable(&iim_clk);
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
- clk_enable(&uart1_clk);
-#endif
-
- mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
- MX27_INT_GPT1);
-
- return 0;
-}
-
-#ifdef CONFIG_OF
-int __init mx27_clocks_init_dt(void)
-{
- struct device_node *np;
- u32 fref = 26000000; /* default */
-
- for_each_compatible_node(np, NULL, "fixed-clock") {
- if (!of_device_is_compatible(np, "fsl,imx-osc26m"))
- continue;
-
- if (!of_property_read_u32(np, "clock-frequency", &fref))
- break;
- }
-
- return mx27_clocks_init(fref);
-}
-#endif
diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c
deleted file mode 100644
index 3a943cd4159f..000000000000
--- a/arch/arm/mach-imx/clock-imx31.c
+++ /dev/null
@@ -1,630 +0,0 @@
-/*
- * Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <asm/div64.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/mx31.h>
-#include <mach/common.h>
-
-#include "crmregs-imx3.h"
-
-#define PRE_DIV_MIN_FREQ 10000000 /* Minimum Frequency after Predivider */
-
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post)
-{
- u32 min_pre, temp_pre, old_err, err;
-
- if (div >= 512) {
- *pre = 8;
- *post = 64;
- } else if (div >= 64) {
- min_pre = (div - 1) / 64 + 1;
- old_err = 8;
- for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
- err = div % temp_pre;
- if (err == 0) {
- *pre = temp_pre;
- break;
- }
- err = temp_pre - err;
- if (err < old_err) {
- old_err = err;
- *pre = temp_pre;
- }
- }
- *post = (div + *pre - 1) / *pre;
- } else if (div <= 8) {
- *pre = div;
- *post = 1;
- } else {
- *pre = 1;
- *post = div;
- }
-}
-
-static struct clk mcu_pll_clk;
-static struct clk serial_pll_clk;
-static struct clk ipg_clk;
-static struct clk ckih_clk;
-
-static int cgr_enable(struct clk *clk)
-{
- u32 reg;
-
- if (!clk->enable_reg)
- return 0;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 3 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void cgr_disable(struct clk *clk)
-{
- u32 reg;
-
- if (!clk->enable_reg)
- return;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(3 << clk->enable_shift);
-
- /* special case for EMI clock */
- if (clk->enable_reg == MXC_CCM_CGR2 && clk->enable_shift == 8)
- reg |= (1 << clk->enable_shift);
-
- __raw_writel(reg, clk->enable_reg);
-}
-
-static unsigned long pll_ref_get_rate(void)
-{
- unsigned long ccmr;
- unsigned int prcs;
-
- ccmr = __raw_readl(MXC_CCM_CCMR);
- prcs = (ccmr & MXC_CCM_CCMR_PRCS_MASK) >> MXC_CCM_CCMR_PRCS_OFFSET;
- if (prcs == 0x1)
- return CKIL_CLK_FREQ * 1024;
- else
- return clk_get_rate(&ckih_clk);
-}
-
-static unsigned long usb_pll_get_rate(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(MXC_CCM_UPCTL);
-
- return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long serial_pll_get_rate(struct clk *clk)
-{
- unsigned long reg;
-
- reg = __raw_readl(MXC_CCM_SRPCTL);
-
- return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static unsigned long mcu_pll_get_rate(struct clk *clk)
-{
- unsigned long reg, ccmr;
-
- ccmr = __raw_readl(MXC_CCM_CCMR);
-
- if (!(ccmr & MXC_CCM_CCMR_MPE) || (ccmr & MXC_CCM_CCMR_MDS))
- return clk_get_rate(&ckih_clk);
-
- reg = __raw_readl(MXC_CCM_MPCTL);
-
- return mxc_decode_pll(reg, pll_ref_get_rate());
-}
-
-static int usb_pll_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg |= MXC_CCM_CCMR_UPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-
- /* No lock bit on MX31, so using max time from spec */
- udelay(80);
-
- return 0;
-}
-
-static void usb_pll_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg &= ~MXC_CCM_CCMR_UPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-}
-
-static int serial_pll_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg |= MXC_CCM_CCMR_SPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-
- /* No lock bit on MX31, so using max time from spec */
- udelay(80);
-
- return 0;
-}
-
-static void serial_pll_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCMR);
- reg &= ~MXC_CCM_CCMR_SPE;
- __raw_writel(reg, MXC_CCM_CCMR);
-}
-
-#define PDR0(mask, off) ((__raw_readl(MXC_CCM_PDR0) & mask) >> off)
-#define PDR1(mask, off) ((__raw_readl(MXC_CCM_PDR1) & mask) >> off)
-#define PDR2(mask, off) ((__raw_readl(MXC_CCM_PDR2) & mask) >> off)
-
-static unsigned long mcu_main_get_rate(struct clk *clk)
-{
- u32 pmcr0 = __raw_readl(MXC_CCM_PMCR0);
-
- if ((pmcr0 & MXC_CCM_PMCR0_DFSUP1) == MXC_CCM_PMCR0_DFSUP1_SPLL)
- return clk_get_rate(&serial_pll_clk);
- else
- return clk_get_rate(&mcu_pll_clk);
-}
-
-static unsigned long ahb_get_rate(struct clk *clk)
-{
- unsigned long max_pdf;
-
- max_pdf = PDR0(MXC_CCM_PDR0_MAX_PODF_MASK,
- MXC_CCM_PDR0_MAX_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (max_pdf + 1);
-}
-
-static unsigned long ipg_get_rate(struct clk *clk)
-{
- unsigned long ipg_pdf;
-
- ipg_pdf = PDR0(MXC_CCM_PDR0_IPG_PODF_MASK,
- MXC_CCM_PDR0_IPG_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (ipg_pdf + 1);
-}
-
-static unsigned long nfc_get_rate(struct clk *clk)
-{
- unsigned long nfc_pdf;
-
- nfc_pdf = PDR0(MXC_CCM_PDR0_NFC_PODF_MASK,
- MXC_CCM_PDR0_NFC_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (nfc_pdf + 1);
-}
-
-static unsigned long hsp_get_rate(struct clk *clk)
-{
- unsigned long hsp_pdf;
-
- hsp_pdf = PDR0(MXC_CCM_PDR0_HSP_PODF_MASK,
- MXC_CCM_PDR0_HSP_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (hsp_pdf + 1);
-}
-
-static unsigned long usb_get_rate(struct clk *clk)
-{
- unsigned long usb_pdf, usb_prepdf;
-
- usb_pdf = PDR1(MXC_CCM_PDR1_USB_PODF_MASK,
- MXC_CCM_PDR1_USB_PODF_OFFSET);
- usb_prepdf = PDR1(MXC_CCM_PDR1_USB_PRDF_MASK,
- MXC_CCM_PDR1_USB_PRDF_OFFSET);
- return clk_get_rate(clk->parent) / (usb_prepdf + 1) / (usb_pdf + 1);
-}
-
-static unsigned long csi_get_rate(struct clk *clk)
-{
- u32 reg, pre, post;
-
- reg = __raw_readl(MXC_CCM_PDR0);
- pre = (reg & MXC_CCM_PDR0_CSI_PRDF_MASK) >>
- MXC_CCM_PDR0_CSI_PRDF_OFFSET;
- pre++;
- post = (reg & MXC_CCM_PDR0_CSI_PODF_MASK) >>
- MXC_CCM_PDR0_CSI_PODF_OFFSET;
- post++;
- return clk_get_rate(clk->parent) / (pre * post);
-}
-
-static unsigned long csi_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 pre, post, parent = clk_get_rate(clk->parent);
- u32 div = parent / rate;
-
- if (parent % rate)
- div++;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- return parent / (pre * post);
-}
-
-static int csi_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
- div = parent / rate;
-
- if ((parent / div) != rate)
- return -EINVAL;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- /* Set CSI clock divider */
- reg = __raw_readl(MXC_CCM_PDR0) &
- ~(MXC_CCM_PDR0_CSI_PODF_MASK | MXC_CCM_PDR0_CSI_PRDF_MASK);
- reg |= (post - 1) << MXC_CCM_PDR0_CSI_PODF_OFFSET;
- reg |= (pre - 1) << MXC_CCM_PDR0_CSI_PRDF_OFFSET;
- __raw_writel(reg, MXC_CCM_PDR0);
-
- return 0;
-}
-
-static unsigned long ssi1_get_rate(struct clk *clk)
-{
- unsigned long ssi1_pdf, ssi1_prepdf;
-
- ssi1_pdf = PDR1(MXC_CCM_PDR1_SSI1_PODF_MASK,
- MXC_CCM_PDR1_SSI1_PODF_OFFSET);
- ssi1_prepdf = PDR1(MXC_CCM_PDR1_SSI1_PRE_PODF_MASK,
- MXC_CCM_PDR1_SSI1_PRE_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (ssi1_prepdf + 1) / (ssi1_pdf + 1);
-}
-
-static unsigned long ssi2_get_rate(struct clk *clk)
-{
- unsigned long ssi2_pdf, ssi2_prepdf;
-
- ssi2_pdf = PDR1(MXC_CCM_PDR1_SSI2_PODF_MASK,
- MXC_CCM_PDR1_SSI2_PODF_OFFSET);
- ssi2_prepdf = PDR1(MXC_CCM_PDR1_SSI2_PRE_PODF_MASK,
- MXC_CCM_PDR1_SSI2_PRE_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (ssi2_prepdf + 1) / (ssi2_pdf + 1);
-}
-
-static unsigned long firi_get_rate(struct clk *clk)
-{
- unsigned long firi_pdf, firi_prepdf;
-
- firi_pdf = PDR1(MXC_CCM_PDR1_FIRI_PODF_MASK,
- MXC_CCM_PDR1_FIRI_PODF_OFFSET);
- firi_prepdf = PDR1(MXC_CCM_PDR1_FIRI_PRE_PODF_MASK,
- MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET);
- return clk_get_rate(clk->parent) / (firi_prepdf + 1) / (firi_pdf + 1);
-}
-
-static unsigned long firi_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 pre, post;
- u32 parent = clk_get_rate(clk->parent);
- u32 div = parent / rate;
-
- if (parent % rate)
- div++;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- return parent / (pre * post);
-
-}
-
-static int firi_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div, pre, post, parent = clk_get_rate(clk->parent);
-
- div = parent / rate;
-
- if ((parent / div) != rate)
- return -EINVAL;
-
- __calc_pre_post_dividers(div, &pre, &post);
-
- /* Set FIRI clock divider */
- reg = __raw_readl(MXC_CCM_PDR1) &
- ~(MXC_CCM_PDR1_FIRI_PODF_MASK | MXC_CCM_PDR1_FIRI_PRE_PODF_MASK);
- reg |= (pre - 1) << MXC_CCM_PDR1_FIRI_PRE_PODF_OFFSET;
- reg |= (post - 1) << MXC_CCM_PDR1_FIRI_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_PDR1);
-
- return 0;
-}
-
-static unsigned long mbx_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 2;
-}
-
-static unsigned long mstick1_get_rate(struct clk *clk)
-{
- unsigned long msti_pdf;
-
- msti_pdf = PDR2(MXC_CCM_PDR2_MST1_PDF_MASK,
- MXC_CCM_PDR2_MST1_PDF_OFFSET);
- return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long mstick2_get_rate(struct clk *clk)
-{
- unsigned long msti_pdf;
-
- msti_pdf = PDR2(MXC_CCM_PDR2_MST2_PDF_MASK,
- MXC_CCM_PDR2_MST2_PDF_OFFSET);
- return clk_get_rate(clk->parent) / (msti_pdf + 1);
-}
-
-static unsigned long ckih_rate;
-
-static unsigned long clk_ckih_get_rate(struct clk *clk)
-{
- return ckih_rate;
-}
-
-static unsigned long clk_ckil_get_rate(struct clk *clk)
-{
- return CKIL_CLK_FREQ;
-}
-
-static struct clk ckih_clk = {
- .get_rate = clk_ckih_get_rate,
-};
-
-static struct clk mcu_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = mcu_pll_get_rate,
-};
-
-static struct clk mcu_main_clk = {
- .parent = &mcu_pll_clk,
- .get_rate = mcu_main_get_rate,
-};
-
-static struct clk serial_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = serial_pll_get_rate,
- .enable = serial_pll_enable,
- .disable = serial_pll_disable,
-};
-
-static struct clk usb_pll_clk = {
- .parent = &ckih_clk,
- .get_rate = usb_pll_get_rate,
- .enable = usb_pll_enable,
- .disable = usb_pll_disable,
-};
-
-static struct clk ahb_clk = {
- .parent = &mcu_main_clk,
- .get_rate = ahb_get_rate,
-};
-
-#define DEFINE_CLOCK(name, i, er, es, gr, s, p) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .enable = cgr_enable, \
- .disable = cgr_disable, \
- .secondary = s, \
- .parent = p, \
- }
-
-#define DEFINE_CLOCK1(name, i, er, es, getsetround, s, p) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = getsetround##_get_rate, \
- .set_rate = getsetround##_set_rate, \
- .round_rate = getsetround##_round_rate, \
- .enable = cgr_enable, \
- .disable = cgr_disable, \
- .secondary = s, \
- .parent = p, \
- }
-
-DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL);
-
-DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CGR0, 4, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit1_clk, 0, MXC_CCM_CGR0, 6, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(epit2_clk, 1, MXC_CCM_CGR0, 8, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(iim_clk, 0, MXC_CCM_CGR0, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CGR0, 12, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(sdma_clk1, 0, MXC_CCM_CGR0, 14, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(cspi3_clk, 2, MXC_CCM_CGR0, 16, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(rng_clk, 0, MXC_CCM_CGR0, 18, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CGR0, 20, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CGR0, 22, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CGR0, 24, ssi1_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CGR0, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CGR0, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(i2c3_clk, 2, MXC_CCM_CGR0, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk);
-DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ckil_clk);
-DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(kpp_clk, 0, MXC_CCM_CGR1, 20, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipu_clk, 0, MXC_CCM_CGR1, 22, hsp_get_rate, NULL, &mcu_main_clk);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CGR1, 24, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CGR1, 26, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CGR1, 28, NULL, NULL, &perclk_clk);
-DEFINE_CLOCK(owire_clk, 0, MXC_CCM_CGR1, 30, NULL, NULL, &perclk_clk);
-
-DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CGR2, 0, ssi2_get_rate, NULL, &serial_pll_clk);
-DEFINE_CLOCK(cspi1_clk, 0, MXC_CCM_CGR2, 2, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(cspi2_clk, 1, MXC_CCM_CGR2, 4, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(mbx_clk, 0, MXC_CCM_CGR2, 6, mbx_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(emi_clk, 0, MXC_CCM_CGR2, 8, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK(rtic_clk, 0, MXC_CCM_CGR2, 10, NULL, NULL, &ahb_clk);
-DEFINE_CLOCK1(firi_clk, 0, MXC_CCM_CGR2, 12, firi, NULL, &usb_pll_clk);
-
-DEFINE_CLOCK(sdma_clk2, 0, NULL, 0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk);
-DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk);
-DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk);
-DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK(NULL, "emi", emi_clk)
- _REGISTER_CLOCK("imx31-cspi.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("imx31-cspi.1", NULL, cspi2_clk)
- _REGISTER_CLOCK("imx31-cspi.2", NULL, cspi3_clk)
- _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
- _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
- _REGISTER_CLOCK(NULL, "epit", epit1_clk)
- _REGISTER_CLOCK(NULL, "epit", epit2_clk)
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
- _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
- _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
- _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk1)
- _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2)
- _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
- /* i.mx31 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
- _REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
- _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
- _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK(NULL, "firi", firi_clk)
- _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
- _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
- _REGISTER_CLOCK(NULL, "rng", rng_clk)
- _REGISTER_CLOCK("imx31-sdma", NULL, sdma_clk1)
- _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2)
- _REGISTER_CLOCK(NULL, "mstick", mstick1_clk)
- _REGISTER_CLOCK(NULL, "mstick", mstick2_clk)
- _REGISTER_CLOCK(NULL, "scc", scc_clk)
- _REGISTER_CLOCK(NULL, "iim", iim_clk)
- _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk)
- _REGISTER_CLOCK(NULL, "mbx", mbx_clk)
-};
-
-int __init mx31_clocks_init(unsigned long fref)
-{
- u32 reg;
-
- ckih_rate = fref;
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /* change the csi_clk parent if necessary */
- reg = __raw_readl(MXC_CCM_CCMR);
- if (!(reg & MXC_CCM_CCMR_CSCS))
- if (clk_set_parent(&csi_clk, &usb_pll_clk))
- pr_err("%s: error changing csi_clk parent\n", __func__);
-
-
- /* Turn off all possible clocks */
- __raw_writel((3 << 4), MXC_CCM_CGR0);
- __raw_writel(0, MXC_CCM_CGR1);
- __raw_writel((3 << 8) | (3 << 14) | (3 << 16)|
- 1 << 27 | 1 << 28, /* Bit 27 and 28 are not defined for
- MX32, but still required to be set */
- MXC_CCM_CGR2);
-
- /*
- * Before turning off usb_pll make sure ipg_per_clk is generated
- * by ipg_clk and not usb_pll.
- */
- __raw_writel(__raw_readl(MXC_CCM_CCMR) | (1 << 24), MXC_CCM_CCMR);
-
- usb_pll_disable(&usb_pll_clk);
-
- pr_info("Clock input source is %ld\n", clk_get_rate(&ckih_clk));
-
- clk_enable(&gpt_clk);
- clk_enable(&emi_clk);
- clk_enable(&iim_clk);
- mx31_revision();
- clk_disable(&iim_clk);
-
- clk_enable(&serial_pll_clk);
-
- if (mx31_revision() >= IMX_CHIP_REVISION_2_0) {
- reg = __raw_readl(MXC_CCM_PMCR1);
- /* No PLL restart on DVFS switch; enable auto EMI handshake */
- reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
- __raw_writel(reg, MXC_CCM_PMCR1);
- }
-
- mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
- MX31_INT_GPT);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c
deleted file mode 100644
index e56c1a83eee3..000000000000
--- a/arch/arm/mach-imx/clock-imx35.c
+++ /dev/null
@@ -1,536 +0,0 @@
-/*
- * Copyright (C) 2009 by Sascha Hauer, Pengutronix
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/list.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-
-#include <mach/clock.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
-
-#include "crmregs-imx3.h"
-
-#ifdef HAVE_SET_RATE_SUPPORT
-static void calc_dividers(u32 div, u32 *pre, u32 *post, u32 maxpost)
-{
- u32 min_pre, temp_pre, old_err, err;
-
- min_pre = (div - 1) / maxpost + 1;
- old_err = 8;
-
- for (temp_pre = 8; temp_pre >= min_pre; temp_pre--) {
- if (div > (temp_pre * maxpost))
- break;
-
- if (div < (temp_pre * temp_pre))
- continue;
-
- err = div % temp_pre;
-
- if (err == 0) {
- *pre = temp_pre;
- break;
- }
-
- err = temp_pre - err;
-
- if (err < old_err) {
- old_err = err;
- *pre = temp_pre;
- }
- }
-
- *post = (div + *pre - 1) / *pre;
-}
-
-/* get the best values for a 3-bit divider combined with a 6-bit divider */
-static void calc_dividers_3_6(u32 div, u32 *pre, u32 *post)
-{
- if (div >= 512) {
- *pre = 8;
- *post = 64;
- } else if (div >= 64) {
- calc_dividers(div, pre, post, 64);
- } else if (div <= 8) {
- *pre = div;
- *post = 1;
- } else {
- *pre = 1;
- *post = div;
- }
-}
-
-/* get the best values for two cascaded 3-bit dividers */
-static void calc_dividers_3_3(u32 div, u32 *pre, u32 *post)
-{
- if (div >= 64) {
- *pre = *post = 8;
- } else if (div > 8) {
- calc_dividers(div, pre, post, 8);
- } else {
- *pre = 1;
- *post = div;
- }
-}
-#endif
-
-static unsigned long get_rate_mpll(void)
-{
- ulong mpctl = __raw_readl(MX35_CCM_MPCTL);
-
- return mxc_decode_pll(mpctl, 24000000);
-}
-
-static unsigned long get_rate_ppll(void)
-{
- ulong ppctl = __raw_readl(MX35_CCM_PPCTL);
-
- return mxc_decode_pll(ppctl, 24000000);
-}
-
-struct arm_ahb_div {
- unsigned char arm, ahb, sel;
-};
-
-static struct arm_ahb_div clk_consumer[] = {
- { .arm = 1, .ahb = 4, .sel = 0},
- { .arm = 1, .ahb = 3, .sel = 1},
- { .arm = 2, .ahb = 2, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 4, .ahb = 1, .sel = 0},
- { .arm = 1, .ahb = 5, .sel = 0},
- { .arm = 1, .ahb = 8, .sel = 0},
- { .arm = 1, .ahb = 6, .sel = 1},
- { .arm = 2, .ahb = 4, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
- { .arm = 4, .ahb = 2, .sel = 0},
- { .arm = 0, .ahb = 0, .sel = 0},
-};
-
-static unsigned long get_rate_arm(void)
-{
- unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0);
- struct arm_ahb_div *aad;
- unsigned long fref = get_rate_mpll();
-
- aad = &clk_consumer[(pdr0 >> 16) & 0xf];
- if (aad->sel)
- fref = fref * 3 / 4;
-
- return fref / aad->arm;
-}
-
-static unsigned long get_rate_ahb(struct clk *clk)
-{
- unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0);
- struct arm_ahb_div *aad;
- unsigned long fref = get_rate_arm();
-
- aad = &clk_consumer[(pdr0 >> 16) & 0xf];
-
- return fref / aad->ahb;
-}
-
-static unsigned long get_rate_ipg(struct clk *clk)
-{
- return get_rate_ahb(NULL) >> 1;
-}
-
-static unsigned long get_rate_uart(struct clk *clk)
-{
- unsigned long pdr3 = __raw_readl(MX35_CCM_PDR3);
- unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4);
- unsigned long div = ((pdr4 >> 10) & 0x3f) + 1;
-
- if (pdr3 & (1 << 14))
- return get_rate_arm() / div;
- else
- return get_rate_ppll() / div;
-}
-
-static unsigned long get_rate_sdhc(struct clk *clk)
-{
- unsigned long pdr3 = __raw_readl(MX35_CCM_PDR3);
- unsigned long div, rate;
-
- if (pdr3 & (1 << 6))
- rate = get_rate_arm();
- else
- rate = get_rate_ppll();
-
- switch (clk->id) {
- default:
- case 0:
- div = pdr3 & 0x3f;
- break;
- case 1:
- div = (pdr3 >> 8) & 0x3f;
- break;
- case 2:
- div = (pdr3 >> 16) & 0x3f;
- break;
- }
-
- return rate / (div + 1);
-}
-
-static unsigned long get_rate_mshc(struct clk *clk)
-{
- unsigned long pdr1 = __raw_readl(MXC_CCM_PDR1);
- unsigned long div1, div2, rate;
-
- if (pdr1 & (1 << 7))
- rate = get_rate_arm();
- else
- rate = get_rate_ppll();
-
- div1 = (pdr1 >> 29) & 0x7;
- div2 = (pdr1 >> 22) & 0x3f;
-
- return rate / ((div1 + 1) * (div2 + 1));
-}
-
-static unsigned long get_rate_ssi(struct clk *clk)
-{
- unsigned long pdr2 = __raw_readl(MX35_CCM_PDR2);
- unsigned long div1, div2, rate;
-
- if (pdr2 & (1 << 6))
- rate = get_rate_arm();
- else
- rate = get_rate_ppll();
-
- switch (clk->id) {
- default:
- case 0:
- div1 = pdr2 & 0x3f;
- div2 = (pdr2 >> 24) & 0x7;
- break;
- case 1:
- div1 = (pdr2 >> 8) & 0x3f;
- div2 = (pdr2 >> 27) & 0x7;
- break;
- }
-
- return rate / ((div1 + 1) * (div2 + 1));
-}
-
-static unsigned long get_rate_csi(struct clk *clk)
-{
- unsigned long pdr2 = __raw_readl(MX35_CCM_PDR2);
- unsigned long rate;
-
- if (pdr2 & (1 << 7))
- rate = get_rate_arm();
- else
- rate = get_rate_ppll();
-
- return rate / (((pdr2 >> 16) & 0x3f) + 1);
-}
-
-static unsigned long get_rate_otg(struct clk *clk)
-{
- unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4);
- unsigned long rate;
-
- if (pdr4 & (1 << 9))
- rate = get_rate_arm();
- else
- rate = get_rate_ppll();
-
- return rate / (((pdr4 >> 22) & 0x3f) + 1);
-}
-
-static unsigned long get_rate_ipg_per(struct clk *clk)
-{
- unsigned long pdr0 = __raw_readl(MXC_CCM_PDR0);
- unsigned long pdr4 = __raw_readl(MX35_CCM_PDR4);
- unsigned long div;
-
- if (pdr0 & (1 << 26)) {
- div = (pdr4 >> 16) & 0x3f;
- return get_rate_arm() / (div + 1);
- } else {
- div = (pdr0 >> 12) & 0x7;
- return get_rate_ahb(NULL) / (div + 1);
- }
-}
-
-static unsigned long get_rate_hsp(struct clk *clk)
-{
- unsigned long hsp_podf = (__raw_readl(MXC_CCM_PDR0) >> 20) & 0x03;
- unsigned long fref = get_rate_mpll();
-
- if (fref > 400 * 1000 * 1000) {
- switch (hsp_podf) {
- case 0:
- return fref >> 2;
- case 1:
- return fref >> 3;
- case 2:
- return fref / 3;
- }
- } else {
- switch (hsp_podf) {
- case 0:
- case 2:
- return fref / 3;
- case 1:
- return fref / 6;
- }
- }
-
- return 0;
-}
-
-static int clk_cgr_enable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg |= 3 << clk->enable_shift;
- __raw_writel(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void clk_cgr_disable(struct clk *clk)
-{
- u32 reg;
-
- reg = __raw_readl(clk->enable_reg);
- reg &= ~(3 << clk->enable_shift);
- __raw_writel(reg, clk->enable_reg);
-}
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .set_rate = sr, \
- .enable = clk_cgr_enable, \
- .disable = clk_cgr_disable, \
- }
-
-DEFINE_CLOCK(asrc_clk, 0, MX35_CCM_CGR0, 0, NULL, NULL);
-DEFINE_CLOCK(pata_clk, 0, MX35_CCM_CGR0, 2, get_rate_ipg, NULL);
-/* DEFINE_CLOCK(audmux_clk, 0, MX35_CCM_CGR0, 4, NULL, NULL); */
-DEFINE_CLOCK(can1_clk, 0, MX35_CCM_CGR0, 6, get_rate_ipg, NULL);
-DEFINE_CLOCK(can2_clk, 1, MX35_CCM_CGR0, 8, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk, 0, MX35_CCM_CGR0, 10, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk, 1, MX35_CCM_CGR0, 12, get_rate_ipg, NULL);
-DEFINE_CLOCK(ect_clk, 0, MX35_CCM_CGR0, 14, get_rate_ipg, NULL);
-DEFINE_CLOCK(edio_clk, 0, MX35_CCM_CGR0, 16, NULL, NULL);
-DEFINE_CLOCK(emi_clk, 0, MX35_CCM_CGR0, 18, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit1_clk, 0, MX35_CCM_CGR0, 20, get_rate_ipg, NULL);
-DEFINE_CLOCK(epit2_clk, 1, MX35_CCM_CGR0, 22, get_rate_ipg, NULL);
-DEFINE_CLOCK(esai_clk, 0, MX35_CCM_CGR0, 24, NULL, NULL);
-DEFINE_CLOCK(esdhc1_clk, 0, MX35_CCM_CGR0, 26, get_rate_sdhc, NULL);
-DEFINE_CLOCK(esdhc2_clk, 1, MX35_CCM_CGR0, 28, get_rate_sdhc, NULL);
-DEFINE_CLOCK(esdhc3_clk, 2, MX35_CCM_CGR0, 30, get_rate_sdhc, NULL);
-
-DEFINE_CLOCK(fec_clk, 0, MX35_CCM_CGR1, 0, get_rate_ipg, NULL);
-DEFINE_CLOCK(gpio1_clk, 0, MX35_CCM_CGR1, 2, NULL, NULL);
-DEFINE_CLOCK(gpio2_clk, 1, MX35_CCM_CGR1, 4, NULL, NULL);
-DEFINE_CLOCK(gpio3_clk, 2, MX35_CCM_CGR1, 6, NULL, NULL);
-DEFINE_CLOCK(gpt_clk, 0, MX35_CCM_CGR1, 8, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c1_clk, 0, MX35_CCM_CGR1, 10, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(i2c2_clk, 1, MX35_CCM_CGR1, 12, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(i2c3_clk, 2, MX35_CCM_CGR1, 14, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(iomuxc_clk, 0, MX35_CCM_CGR1, 16, NULL, NULL);
-DEFINE_CLOCK(ipu_clk, 0, MX35_CCM_CGR1, 18, get_rate_hsp, NULL);
-DEFINE_CLOCK(kpp_clk, 0, MX35_CCM_CGR1, 20, get_rate_ipg, NULL);
-DEFINE_CLOCK(mlb_clk, 0, MX35_CCM_CGR1, 22, get_rate_ahb, NULL);
-DEFINE_CLOCK(mshc_clk, 0, MX35_CCM_CGR1, 24, get_rate_mshc, NULL);
-DEFINE_CLOCK(owire_clk, 0, MX35_CCM_CGR1, 26, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(pwm_clk, 0, MX35_CCM_CGR1, 28, get_rate_ipg_per, NULL);
-DEFINE_CLOCK(rngc_clk, 0, MX35_CCM_CGR1, 30, get_rate_ipg, NULL);
-
-DEFINE_CLOCK(rtc_clk, 0, MX35_CCM_CGR2, 0, get_rate_ipg, NULL);
-DEFINE_CLOCK(rtic_clk, 0, MX35_CCM_CGR2, 2, get_rate_ahb, NULL);
-DEFINE_CLOCK(scc_clk, 0, MX35_CCM_CGR2, 4, get_rate_ipg, NULL);
-DEFINE_CLOCK(sdma_clk, 0, MX35_CCM_CGR2, 6, NULL, NULL);
-DEFINE_CLOCK(spba_clk, 0, MX35_CCM_CGR2, 8, get_rate_ipg, NULL);
-DEFINE_CLOCK(spdif_clk, 0, MX35_CCM_CGR2, 10, NULL, NULL);
-DEFINE_CLOCK(ssi1_clk, 0, MX35_CCM_CGR2, 12, get_rate_ssi, NULL);
-DEFINE_CLOCK(ssi2_clk, 1, MX35_CCM_CGR2, 14, get_rate_ssi, NULL);
-DEFINE_CLOCK(uart1_clk, 0, MX35_CCM_CGR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk, 1, MX35_CCM_CGR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk, 2, MX35_CCM_CGR2, 20, get_rate_uart, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, MX35_CCM_CGR2, 22, get_rate_otg, NULL);
-DEFINE_CLOCK(wdog_clk, 0, MX35_CCM_CGR2, 24, NULL, NULL);
-DEFINE_CLOCK(max_clk, 0, MX35_CCM_CGR2, 26, NULL, NULL);
-DEFINE_CLOCK(audmux_clk, 0, MX35_CCM_CGR2, 30, NULL, NULL);
-
-DEFINE_CLOCK(csi_clk, 0, MX35_CCM_CGR3, 0, get_rate_csi, NULL);
-DEFINE_CLOCK(iim_clk, 0, MX35_CCM_CGR3, 2, NULL, NULL);
-DEFINE_CLOCK(gpu2d_clk, 0, MX35_CCM_CGR3, 4, NULL, NULL);
-
-DEFINE_CLOCK(usbahb_clk, 0, 0, 0, get_rate_ahb, NULL);
-
-static int clk_dummy_enable(struct clk *clk)
-{
- return 0;
-}
-
-static void clk_dummy_disable(struct clk *clk)
-{
-}
-
-static unsigned long get_rate_nfc(struct clk *clk)
-{
- unsigned long div1;
-
- div1 = (__raw_readl(MX35_CCM_PDR4) >> 28) + 1;
-
- return get_rate_ahb(NULL) / div1;
-}
-
-/* NAND Controller: It seems it can't be disabled */
-static struct clk nfc_clk = {
- .id = 0,
- .enable_reg = 0,
- .enable_shift = 0,
- .get_rate = get_rate_nfc,
- .set_rate = NULL, /* set_rate_nfc, */
- .enable = clk_dummy_enable,
- .disable = clk_dummy_disable
-};
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK(NULL, "asrc", asrc_clk)
- _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
- _REGISTER_CLOCK("flexcan.0", NULL, can1_clk)
- _REGISTER_CLOCK("flexcan.1", NULL, can2_clk)
- _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk)
- _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk)
- _REGISTER_CLOCK(NULL, "ect", ect_clk)
- _REGISTER_CLOCK(NULL, "edio", edio_clk)
- _REGISTER_CLOCK(NULL, "emi", emi_clk)
- _REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk)
- _REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk)
- _REGISTER_CLOCK(NULL, "esai", esai_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx35.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx35.1", NULL, esdhc2_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx35.2", NULL, esdhc3_clk)
- /* i.mx35 has the i.mx27 type fec */
- _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK(NULL, "gpio", gpio1_clk)
- _REGISTER_CLOCK(NULL, "gpio", gpio2_clk)
- _REGISTER_CLOCK(NULL, "gpio", gpio3_clk)
- _REGISTER_CLOCK("gpt.0", NULL, gpt_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk)
- _REGISTER_CLOCK(NULL, "iomuxc", iomuxc_clk)
- _REGISTER_CLOCK("ipu-core", NULL, ipu_clk)
- _REGISTER_CLOCK("mx3_sdc_fb", NULL, ipu_clk)
- _REGISTER_CLOCK(NULL, "kpp", kpp_clk)
- _REGISTER_CLOCK(NULL, "mlb", mlb_clk)
- _REGISTER_CLOCK(NULL, "mshc", mshc_clk)
- _REGISTER_CLOCK("mxc_w1", NULL, owire_clk)
- _REGISTER_CLOCK(NULL, "pwm", pwm_clk)
- _REGISTER_CLOCK(NULL, "rngc", rngc_clk)
- _REGISTER_CLOCK(NULL, "rtc", rtc_clk)
- _REGISTER_CLOCK(NULL, "rtic", rtic_clk)
- _REGISTER_CLOCK(NULL, "scc", scc_clk)
- _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
- _REGISTER_CLOCK(NULL, "spba", spba_clk)
- _REGISTER_CLOCK(NULL, "spdif", spdif_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- /* i.mx35 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, wdog_clk)
- _REGISTER_CLOCK(NULL, "max", max_clk)
- _REGISTER_CLOCK(NULL, "audmux", audmux_clk)
- _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk)
- _REGISTER_CLOCK(NULL, "iim", iim_clk)
- _REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
- _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
-};
-
-int __init mx35_clocks_init()
-{
- unsigned int cgr2 = 3 << 26;
-
-#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
- cgr2 |= 3 << 16;
-#endif
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- /* Turn off all clocks except the ones we need to survive, namely:
- * EMI, GPIO1/2/3, GPT, IOMUX, MAX and eventually uart
- */
- __raw_writel((3 << 18), MX35_CCM_CGR0);
- __raw_writel((3 << 2) | (3 << 4) | (3 << 6) | (3 << 8) | (3 << 16),
- MX35_CCM_CGR1);
- __raw_writel(cgr2, MX35_CCM_CGR2);
- __raw_writel(0, MX35_CCM_CGR3);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX35", mx35_revision());
- clk_disable(&iim_clk);
-
- /*
- * Check if we came up in internal boot mode. If yes, we need some
- * extra clocks turned on, otherwise the MX35 boot ROM code will
- * hang after a watchdog reset.
- */
- if (!(__raw_readl(MX35_CCM_RCSR) & (3 << 10))) {
- /* Additionally turn on UART1, SCC, and IIM clocks */
- clk_enable(&iim_clk);
- clk_enable(&uart1_clk);
- clk_enable(&scc_clk);
- }
-
-#ifdef CONFIG_MXC_USE_EPIT
- epit_timer_init(&epit1_clk,
- MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
-#else
- mxc_timer_init(&gpt_clk,
- MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
-#endif
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
deleted file mode 100644
index 111c328f5420..000000000000
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ /dev/null
@@ -1,2111 +0,0 @@
-/*
- * Copyright 2011 Freescale Semiconductor, Inc.
- * Copyright 2011 Linaro Ltd.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <asm/div64.h>
-#include <asm/mach/map.h>
-#include <mach/clock.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-
-#define PLL_BASE IMX_IO_ADDRESS(MX6Q_ANATOP_BASE_ADDR)
-#define PLL1_SYS (PLL_BASE + 0x000)
-#define PLL2_BUS (PLL_BASE + 0x030)
-#define PLL3_USB_OTG (PLL_BASE + 0x010)
-#define PLL4_AUDIO (PLL_BASE + 0x070)
-#define PLL5_VIDEO (PLL_BASE + 0x0a0)
-#define PLL6_MLB (PLL_BASE + 0x0d0)
-#define PLL7_USB_HOST (PLL_BASE + 0x020)
-#define PLL8_ENET (PLL_BASE + 0x0e0)
-#define PFD_480 (PLL_BASE + 0x0f0)
-#define PFD_528 (PLL_BASE + 0x100)
-#define PLL_NUM_OFFSET 0x010
-#define PLL_DENOM_OFFSET 0x020
-
-#define PFD0 7
-#define PFD1 15
-#define PFD2 23
-#define PFD3 31
-#define PFD_FRAC_MASK 0x3f
-
-#define BM_PLL_BYPASS (0x1 << 16)
-#define BM_PLL_ENABLE (0x1 << 13)
-#define BM_PLL_POWER_DOWN (0x1 << 12)
-#define BM_PLL_LOCK (0x1 << 31)
-#define BP_PLL_SYS_DIV_SELECT 0
-#define BM_PLL_SYS_DIV_SELECT (0x7f << 0)
-#define BP_PLL_BUS_DIV_SELECT 0
-#define BM_PLL_BUS_DIV_SELECT (0x1 << 0)
-#define BP_PLL_USB_DIV_SELECT 0
-#define BM_PLL_USB_DIV_SELECT (0x3 << 0)
-#define BP_PLL_AV_DIV_SELECT 0
-#define BM_PLL_AV_DIV_SELECT (0x7f << 0)
-#define BP_PLL_ENET_DIV_SELECT 0
-#define BM_PLL_ENET_DIV_SELECT (0x3 << 0)
-#define BM_PLL_ENET_EN_PCIE (0x1 << 19)
-#define BM_PLL_ENET_EN_SATA (0x1 << 20)
-
-#define CCM_BASE IMX_IO_ADDRESS(MX6Q_CCM_BASE_ADDR)
-#define CCR (CCM_BASE + 0x00)
-#define CCDR (CCM_BASE + 0x04)
-#define CSR (CCM_BASE + 0x08)
-#define CCSR (CCM_BASE + 0x0c)
-#define CACRR (CCM_BASE + 0x10)
-#define CBCDR (CCM_BASE + 0x14)
-#define CBCMR (CCM_BASE + 0x18)
-#define CSCMR1 (CCM_BASE + 0x1c)
-#define CSCMR2 (CCM_BASE + 0x20)
-#define CSCDR1 (CCM_BASE + 0x24)
-#define CS1CDR (CCM_BASE + 0x28)
-#define CS2CDR (CCM_BASE + 0x2c)
-#define CDCDR (CCM_BASE + 0x30)
-#define CHSCCDR (CCM_BASE + 0x34)
-#define CSCDR2 (CCM_BASE + 0x38)
-#define CSCDR3 (CCM_BASE + 0x3c)
-#define CSCDR4 (CCM_BASE + 0x40)
-#define CWDR (CCM_BASE + 0x44)
-#define CDHIPR (CCM_BASE + 0x48)
-#define CDCR (CCM_BASE + 0x4c)
-#define CTOR (CCM_BASE + 0x50)
-#define CLPCR (CCM_BASE + 0x54)
-#define CISR (CCM_BASE + 0x58)
-#define CIMR (CCM_BASE + 0x5c)
-#define CCOSR (CCM_BASE + 0x60)
-#define CGPR (CCM_BASE + 0x64)
-#define CCGR0 (CCM_BASE + 0x68)
-#define CCGR1 (CCM_BASE + 0x6c)
-#define CCGR2 (CCM_BASE + 0x70)
-#define CCGR3 (CCM_BASE + 0x74)
-#define CCGR4 (CCM_BASE + 0x78)
-#define CCGR5 (CCM_BASE + 0x7c)
-#define CCGR6 (CCM_BASE + 0x80)
-#define CCGR7 (CCM_BASE + 0x84)
-#define CMEOR (CCM_BASE + 0x88)
-
-#define CG0 0
-#define CG1 2
-#define CG2 4
-#define CG3 6
-#define CG4 8
-#define CG5 10
-#define CG6 12
-#define CG7 14
-#define CG8 16
-#define CG9 18
-#define CG10 20
-#define CG11 22
-#define CG12 24
-#define CG13 26
-#define CG14 28
-#define CG15 30
-
-#define BM_CCSR_PLL1_SW_SEL (0x1 << 2)
-#define BM_CCSR_STEP_SEL (0x1 << 8)
-
-#define BP_CACRR_ARM_PODF 0
-#define BM_CACRR_ARM_PODF (0x7 << 0)
-
-#define BP_CBCDR_PERIPH2_CLK2_PODF 0
-#define BM_CBCDR_PERIPH2_CLK2_PODF (0x7 << 0)
-#define BP_CBCDR_MMDC_CH1_AXI_PODF 3
-#define BM_CBCDR_MMDC_CH1_AXI_PODF (0x7 << 3)
-#define BP_CBCDR_AXI_SEL 6
-#define BM_CBCDR_AXI_SEL (0x3 << 6)
-#define BP_CBCDR_IPG_PODF 8
-#define BM_CBCDR_IPG_PODF (0x3 << 8)
-#define BP_CBCDR_AHB_PODF 10
-#define BM_CBCDR_AHB_PODF (0x7 << 10)
-#define BP_CBCDR_AXI_PODF 16
-#define BM_CBCDR_AXI_PODF (0x7 << 16)
-#define BP_CBCDR_MMDC_CH0_AXI_PODF 19
-#define BM_CBCDR_MMDC_CH0_AXI_PODF (0x7 << 19)
-#define BP_CBCDR_PERIPH_CLK_SEL 25
-#define BM_CBCDR_PERIPH_CLK_SEL (0x1 << 25)
-#define BP_CBCDR_PERIPH2_CLK_SEL 26
-#define BM_CBCDR_PERIPH2_CLK_SEL (0x1 << 26)
-#define BP_CBCDR_PERIPH_CLK2_PODF 27
-#define BM_CBCDR_PERIPH_CLK2_PODF (0x7 << 27)
-
-#define BP_CBCMR_GPU2D_AXI_SEL 0
-#define BM_CBCMR_GPU2D_AXI_SEL (0x1 << 0)
-#define BP_CBCMR_GPU3D_AXI_SEL 1
-#define BM_CBCMR_GPU3D_AXI_SEL (0x1 << 1)
-#define BP_CBCMR_GPU3D_CORE_SEL 4
-#define BM_CBCMR_GPU3D_CORE_SEL (0x3 << 4)
-#define BP_CBCMR_GPU3D_SHADER_SEL 8
-#define BM_CBCMR_GPU3D_SHADER_SEL (0x3 << 8)
-#define BP_CBCMR_PCIE_AXI_SEL 10
-#define BM_CBCMR_PCIE_AXI_SEL (0x1 << 10)
-#define BP_CBCMR_VDO_AXI_SEL 11
-#define BM_CBCMR_VDO_AXI_SEL (0x1 << 11)
-#define BP_CBCMR_PERIPH_CLK2_SEL 12
-#define BM_CBCMR_PERIPH_CLK2_SEL (0x3 << 12)
-#define BP_CBCMR_VPU_AXI_SEL 14
-#define BM_CBCMR_VPU_AXI_SEL (0x3 << 14)
-#define BP_CBCMR_GPU2D_CORE_SEL 16
-#define BM_CBCMR_GPU2D_CORE_SEL (0x3 << 16)
-#define BP_CBCMR_PRE_PERIPH_CLK_SEL 18
-#define BM_CBCMR_PRE_PERIPH_CLK_SEL (0x3 << 18)
-#define BP_CBCMR_PERIPH2_CLK2_SEL 20
-#define BM_CBCMR_PERIPH2_CLK2_SEL (0x1 << 20)
-#define BP_CBCMR_PRE_PERIPH2_CLK_SEL 21
-#define BM_CBCMR_PRE_PERIPH2_CLK_SEL (0x3 << 21)
-#define BP_CBCMR_GPU2D_CORE_PODF 23
-#define BM_CBCMR_GPU2D_CORE_PODF (0x7 << 23)
-#define BP_CBCMR_GPU3D_CORE_PODF 26
-#define BM_CBCMR_GPU3D_CORE_PODF (0x7 << 26)
-#define BP_CBCMR_GPU3D_SHADER_PODF 29
-#define BM_CBCMR_GPU3D_SHADER_PODF (0x7 << 29)
-
-#define BP_CSCMR1_PERCLK_PODF 0
-#define BM_CSCMR1_PERCLK_PODF (0x3f << 0)
-#define BP_CSCMR1_SSI1_SEL 10
-#define BM_CSCMR1_SSI1_SEL (0x3 << 10)
-#define BP_CSCMR1_SSI2_SEL 12
-#define BM_CSCMR1_SSI2_SEL (0x3 << 12)
-#define BP_CSCMR1_SSI3_SEL 14
-#define BM_CSCMR1_SSI3_SEL (0x3 << 14)
-#define BP_CSCMR1_USDHC1_SEL 16
-#define BM_CSCMR1_USDHC1_SEL (0x1 << 16)
-#define BP_CSCMR1_USDHC2_SEL 17
-#define BM_CSCMR1_USDHC2_SEL (0x1 << 17)
-#define BP_CSCMR1_USDHC3_SEL 18
-#define BM_CSCMR1_USDHC3_SEL (0x1 << 18)
-#define BP_CSCMR1_USDHC4_SEL 19
-#define BM_CSCMR1_USDHC4_SEL (0x1 << 19)
-#define BP_CSCMR1_EMI_PODF 20
-#define BM_CSCMR1_EMI_PODF (0x7 << 20)
-#define BP_CSCMR1_EMI_SLOW_PODF 23
-#define BM_CSCMR1_EMI_SLOW_PODF (0x7 << 23)
-#define BP_CSCMR1_EMI_SEL 27
-#define BM_CSCMR1_EMI_SEL (0x3 << 27)
-#define BP_CSCMR1_EMI_SLOW_SEL 29
-#define BM_CSCMR1_EMI_SLOW_SEL (0x3 << 29)
-
-#define BP_CSCMR2_CAN_PODF 2
-#define BM_CSCMR2_CAN_PODF (0x3f << 2)
-#define BM_CSCMR2_LDB_DI0_IPU_DIV (0x1 << 10)
-#define BM_CSCMR2_LDB_DI1_IPU_DIV (0x1 << 11)
-#define BP_CSCMR2_ESAI_SEL 19
-#define BM_CSCMR2_ESAI_SEL (0x3 << 19)
-
-#define BP_CSCDR1_UART_PODF 0
-#define BM_CSCDR1_UART_PODF (0x3f << 0)
-#define BP_CSCDR1_USDHC1_PODF 11
-#define BM_CSCDR1_USDHC1_PODF (0x7 << 11)
-#define BP_CSCDR1_USDHC2_PODF 16
-#define BM_CSCDR1_USDHC2_PODF (0x7 << 16)
-#define BP_CSCDR1_USDHC3_PODF 19
-#define BM_CSCDR1_USDHC3_PODF (0x7 << 19)
-#define BP_CSCDR1_USDHC4_PODF 22
-#define BM_CSCDR1_USDHC4_PODF (0x7 << 22)
-#define BP_CSCDR1_VPU_AXI_PODF 25
-#define BM_CSCDR1_VPU_AXI_PODF (0x7 << 25)
-
-#define BP_CS1CDR_SSI1_PODF 0
-#define BM_CS1CDR_SSI1_PODF (0x3f << 0)
-#define BP_CS1CDR_SSI1_PRED 6
-#define BM_CS1CDR_SSI1_PRED (0x7 << 6)
-#define BP_CS1CDR_ESAI_PRED 9
-#define BM_CS1CDR_ESAI_PRED (0x7 << 9)
-#define BP_CS1CDR_SSI3_PODF 16
-#define BM_CS1CDR_SSI3_PODF (0x3f << 16)
-#define BP_CS1CDR_SSI3_PRED 22
-#define BM_CS1CDR_SSI3_PRED (0x7 << 22)
-#define BP_CS1CDR_ESAI_PODF 25
-#define BM_CS1CDR_ESAI_PODF (0x7 << 25)
-
-#define BP_CS2CDR_SSI2_PODF 0
-#define BM_CS2CDR_SSI2_PODF (0x3f << 0)
-#define BP_CS2CDR_SSI2_PRED 6
-#define BM_CS2CDR_SSI2_PRED (0x7 << 6)
-#define BP_CS2CDR_LDB_DI0_SEL 9
-#define BM_CS2CDR_LDB_DI0_SEL (0x7 << 9)
-#define BP_CS2CDR_LDB_DI1_SEL 12
-#define BM_CS2CDR_LDB_DI1_SEL (0x7 << 12)
-#define BP_CS2CDR_ENFC_SEL 16
-#define BM_CS2CDR_ENFC_SEL (0x3 << 16)
-#define BP_CS2CDR_ENFC_PRED 18
-#define BM_CS2CDR_ENFC_PRED (0x7 << 18)
-#define BP_CS2CDR_ENFC_PODF 21
-#define BM_CS2CDR_ENFC_PODF (0x3f << 21)
-
-#define BP_CDCDR_ASRC_SERIAL_SEL 7
-#define BM_CDCDR_ASRC_SERIAL_SEL (0x3 << 7)
-#define BP_CDCDR_ASRC_SERIAL_PODF 9
-#define BM_CDCDR_ASRC_SERIAL_PODF (0x7 << 9)
-#define BP_CDCDR_ASRC_SERIAL_PRED 12
-#define BM_CDCDR_ASRC_SERIAL_PRED (0x7 << 12)
-#define BP_CDCDR_SPDIF_SEL 20
-#define BM_CDCDR_SPDIF_SEL (0x3 << 20)
-#define BP_CDCDR_SPDIF_PODF 22
-#define BM_CDCDR_SPDIF_PODF (0x7 << 22)
-#define BP_CDCDR_SPDIF_PRED 25
-#define BM_CDCDR_SPDIF_PRED (0x7 << 25)
-#define BP_CDCDR_HSI_TX_PODF 29
-#define BM_CDCDR_HSI_TX_PODF (0x7 << 29)
-#define BP_CDCDR_HSI_TX_SEL 28
-#define BM_CDCDR_HSI_TX_SEL (0x1 << 28)
-
-#define BP_CHSCCDR_IPU1_DI0_SEL 0
-#define BM_CHSCCDR_IPU1_DI0_SEL (0x7 << 0)
-#define BP_CHSCCDR_IPU1_DI0_PRE_PODF 3
-#define BM_CHSCCDR_IPU1_DI0_PRE_PODF (0x7 << 3)
-#define BP_CHSCCDR_IPU1_DI0_PRE_SEL 6
-#define BM_CHSCCDR_IPU1_DI0_PRE_SEL (0x7 << 6)
-#define BP_CHSCCDR_IPU1_DI1_SEL 9
-#define BM_CHSCCDR_IPU1_DI1_SEL (0x7 << 9)
-#define BP_CHSCCDR_IPU1_DI1_PRE_PODF 12
-#define BM_CHSCCDR_IPU1_DI1_PRE_PODF (0x7 << 12)
-#define BP_CHSCCDR_IPU1_DI1_PRE_SEL 15
-#define BM_CHSCCDR_IPU1_DI1_PRE_SEL (0x7 << 15)
-
-#define BP_CSCDR2_IPU2_DI0_SEL 0
-#define BM_CSCDR2_IPU2_DI0_SEL (0x7)
-#define BP_CSCDR2_IPU2_DI0_PRE_PODF 3
-#define BM_CSCDR2_IPU2_DI0_PRE_PODF (0x7 << 3)
-#define BP_CSCDR2_IPU2_DI0_PRE_SEL 6
-#define BM_CSCDR2_IPU2_DI0_PRE_SEL (0x7 << 6)
-#define BP_CSCDR2_IPU2_DI1_SEL 9
-#define BM_CSCDR2_IPU2_DI1_SEL (0x7 << 9)
-#define BP_CSCDR2_IPU2_DI1_PRE_PODF 12
-#define BM_CSCDR2_IPU2_DI1_PRE_PODF (0x7 << 12)
-#define BP_CSCDR2_IPU2_DI1_PRE_SEL 15
-#define BM_CSCDR2_IPU2_DI1_PRE_SEL (0x7 << 15)
-#define BP_CSCDR2_ECSPI_CLK_PODF 19
-#define BM_CSCDR2_ECSPI_CLK_PODF (0x3f << 19)
-
-#define BP_CSCDR3_IPU1_HSP_SEL 9
-#define BM_CSCDR3_IPU1_HSP_SEL (0x3 << 9)
-#define BP_CSCDR3_IPU1_HSP_PODF 11
-#define BM_CSCDR3_IPU1_HSP_PODF (0x7 << 11)
-#define BP_CSCDR3_IPU2_HSP_SEL 14
-#define BM_CSCDR3_IPU2_HSP_SEL (0x3 << 14)
-#define BP_CSCDR3_IPU2_HSP_PODF 16
-#define BM_CSCDR3_IPU2_HSP_PODF (0x7 << 16)
-
-#define BM_CDHIPR_AXI_PODF_BUSY (0x1 << 0)
-#define BM_CDHIPR_AHB_PODF_BUSY (0x1 << 1)
-#define BM_CDHIPR_MMDC_CH1_PODF_BUSY (0x1 << 2)
-#define BM_CDHIPR_PERIPH2_SEL_BUSY (0x1 << 3)
-#define BM_CDHIPR_MMDC_CH0_PODF_BUSY (0x1 << 4)
-#define BM_CDHIPR_PERIPH_SEL_BUSY (0x1 << 5)
-#define BM_CDHIPR_ARM_PODF_BUSY (0x1 << 16)
-
-#define BP_CLPCR_LPM 0
-#define BM_CLPCR_LPM (0x3 << 0)
-#define BM_CLPCR_BYPASS_PMIC_READY (0x1 << 2)
-#define BM_CLPCR_ARM_CLK_DIS_ON_LPM (0x1 << 5)
-#define BM_CLPCR_SBYOS (0x1 << 6)
-#define BM_CLPCR_DIS_REF_OSC (0x1 << 7)
-#define BM_CLPCR_VSTBY (0x1 << 8)
-#define BP_CLPCR_STBY_COUNT 9
-#define BM_CLPCR_STBY_COUNT (0x3 << 9)
-#define BM_CLPCR_COSC_PWRDOWN (0x1 << 11)
-#define BM_CLPCR_WB_PER_AT_LPM (0x1 << 16)
-#define BM_CLPCR_WB_CORE_AT_LPM (0x1 << 17)
-#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS (0x1 << 19)
-#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS (0x1 << 21)
-#define BM_CLPCR_MASK_CORE0_WFI (0x1 << 22)
-#define BM_CLPCR_MASK_CORE1_WFI (0x1 << 23)
-#define BM_CLPCR_MASK_CORE2_WFI (0x1 << 24)
-#define BM_CLPCR_MASK_CORE3_WFI (0x1 << 25)
-#define BM_CLPCR_MASK_SCU_IDLE (0x1 << 26)
-#define BM_CLPCR_MASK_L2CC_IDLE (0x1 << 27)
-
-#define BP_CCOSR_CKO1_EN 7
-#define BP_CCOSR_CKO1_PODF 4
-#define BM_CCOSR_CKO1_PODF (0x7 << 4)
-#define BP_CCOSR_CKO1_SEL 0
-#define BM_CCOSR_CKO1_SEL (0xf << 0)
-
-#define FREQ_480M 480000000
-#define FREQ_528M 528000000
-#define FREQ_594M 594000000
-#define FREQ_650M 650000000
-#define FREQ_1300M 1300000000
-
-static struct clk pll1_sys;
-static struct clk pll2_bus;
-static struct clk pll3_usb_otg;
-static struct clk pll4_audio;
-static struct clk pll5_video;
-static struct clk pll6_mlb;
-static struct clk pll7_usb_host;
-static struct clk pll8_enet;
-static struct clk apbh_dma_clk;
-static struct clk arm_clk;
-static struct clk ipg_clk;
-static struct clk ahb_clk;
-static struct clk axi_clk;
-static struct clk mmdc_ch0_axi_clk;
-static struct clk mmdc_ch1_axi_clk;
-static struct clk periph_clk;
-static struct clk periph_pre_clk;
-static struct clk periph_clk2_clk;
-static struct clk periph2_clk;
-static struct clk periph2_pre_clk;
-static struct clk periph2_clk2_clk;
-static struct clk gpu2d_core_clk;
-static struct clk gpu3d_core_clk;
-static struct clk gpu3d_shader_clk;
-static struct clk ipg_perclk;
-static struct clk emi_clk;
-static struct clk emi_slow_clk;
-static struct clk can1_clk;
-static struct clk uart_clk;
-static struct clk usdhc1_clk;
-static struct clk usdhc2_clk;
-static struct clk usdhc3_clk;
-static struct clk usdhc4_clk;
-static struct clk vpu_clk;
-static struct clk hsi_tx_clk;
-static struct clk ipu1_di0_pre_clk;
-static struct clk ipu1_di1_pre_clk;
-static struct clk ipu2_di0_pre_clk;
-static struct clk ipu2_di1_pre_clk;
-static struct clk ipu1_clk;
-static struct clk ipu2_clk;
-static struct clk ssi1_clk;
-static struct clk ssi3_clk;
-static struct clk esai_clk;
-static struct clk ssi2_clk;
-static struct clk spdif_clk;
-static struct clk asrc_serial_clk;
-static struct clk gpu2d_axi_clk;
-static struct clk gpu3d_axi_clk;
-static struct clk pcie_clk;
-static struct clk vdo_axi_clk;
-static struct clk ldb_di0_clk;
-static struct clk ldb_di1_clk;
-static struct clk ipu1_di0_clk;
-static struct clk ipu1_di1_clk;
-static struct clk ipu2_di0_clk;
-static struct clk ipu2_di1_clk;
-static struct clk enfc_clk;
-static struct clk cko1_clk;
-static struct clk dummy_clk = {};
-
-static unsigned long external_high_reference;
-static unsigned long external_low_reference;
-static unsigned long oscillator_reference;
-
-static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
-{
- return oscillator_reference;
-}
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
- return external_high_reference;
-}
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
- return external_low_reference;
-}
-
-static struct clk ckil_clk = {
- .get_rate = get_low_reference_clock_rate,
-};
-
-static struct clk ckih_clk = {
- .get_rate = get_high_reference_clock_rate,
-};
-
-static struct clk osc_clk = {
- .get_rate = get_oscillator_reference_clock_rate,
-};
-
-static inline void __iomem *pll_get_reg_addr(struct clk *pll)
-{
- if (pll == &pll1_sys)
- return PLL1_SYS;
- else if (pll == &pll2_bus)
- return PLL2_BUS;
- else if (pll == &pll3_usb_otg)
- return PLL3_USB_OTG;
- else if (pll == &pll4_audio)
- return PLL4_AUDIO;
- else if (pll == &pll5_video)
- return PLL5_VIDEO;
- else if (pll == &pll6_mlb)
- return PLL6_MLB;
- else if (pll == &pll7_usb_host)
- return PLL7_USB_HOST;
- else if (pll == &pll8_enet)
- return PLL8_ENET;
- else
- BUG();
-
- return NULL;
-}
-
-static int pll_enable(struct clk *clk)
-{
- int timeout = 0x100000;
- void __iomem *reg;
- u32 val;
-
- reg = pll_get_reg_addr(clk);
- val = readl_relaxed(reg);
- val &= ~BM_PLL_BYPASS;
- val &= ~BM_PLL_POWER_DOWN;
- /* 480MHz PLLs have the opposite definition for power bit */
- if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
- val |= BM_PLL_POWER_DOWN;
- writel_relaxed(val, reg);
-
- /* Wait for PLL to lock */
- while (!(readl_relaxed(reg) & BM_PLL_LOCK) && --timeout)
- cpu_relax();
-
- if (unlikely(!timeout))
- return -EBUSY;
-
- /* Enable the PLL output now */
- val = readl_relaxed(reg);
- val |= BM_PLL_ENABLE;
- writel_relaxed(val, reg);
-
- return 0;
-}
-
-static void pll_disable(struct clk *clk)
-{
- void __iomem *reg;
- u32 val;
-
- reg = pll_get_reg_addr(clk);
- val = readl_relaxed(reg);
- val &= ~BM_PLL_ENABLE;
- val |= BM_PLL_BYPASS;
- val |= BM_PLL_POWER_DOWN;
- if (clk == &pll3_usb_otg || clk == &pll7_usb_host)
- val &= ~BM_PLL_POWER_DOWN;
- writel_relaxed(val, reg);
-}
-
-static unsigned long pll1_sys_get_rate(struct clk *clk)
-{
- u32 div = (readl_relaxed(PLL1_SYS) & BM_PLL_SYS_DIV_SELECT) >>
- BP_PLL_SYS_DIV_SELECT;
-
- return clk_get_rate(clk->parent) * div / 2;
-}
-
-static int pll1_sys_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 val, div;
-
- if (rate < FREQ_650M || rate > FREQ_1300M)
- return -EINVAL;
-
- div = rate * 2 / clk_get_rate(clk->parent);
- val = readl_relaxed(PLL1_SYS);
- val &= ~BM_PLL_SYS_DIV_SELECT;
- val |= div << BP_PLL_SYS_DIV_SELECT;
- writel_relaxed(val, PLL1_SYS);
-
- return 0;
-}
-
-static unsigned long pll8_enet_get_rate(struct clk *clk)
-{
- u32 div = (readl_relaxed(PLL8_ENET) & BM_PLL_ENET_DIV_SELECT) >>
- BP_PLL_ENET_DIV_SELECT;
-
- switch (div) {
- case 0:
- return 25000000;
- case 1:
- return 50000000;
- case 2:
- return 100000000;
- case 3:
- return 125000000;
- }
-
- return 0;
-}
-
-static int pll8_enet_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 val, div;
-
- switch (rate) {
- case 25000000:
- div = 0;
- break;
- case 50000000:
- div = 1;
- break;
- case 100000000:
- div = 2;
- break;
- case 125000000:
- div = 3;
- break;
- default:
- return -EINVAL;
- }
-
- val = readl_relaxed(PLL8_ENET);
- val &= ~BM_PLL_ENET_DIV_SELECT;
- val |= div << BP_PLL_ENET_DIV_SELECT;
- writel_relaxed(val, PLL8_ENET);
-
- return 0;
-}
-
-static unsigned long pll_av_get_rate(struct clk *clk)
-{
- void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
- unsigned long parent_rate = clk_get_rate(clk->parent);
- u32 mfn = readl_relaxed(reg + PLL_NUM_OFFSET);
- u32 mfd = readl_relaxed(reg + PLL_DENOM_OFFSET);
- u32 div = (readl_relaxed(reg) & BM_PLL_AV_DIV_SELECT) >>
- BP_PLL_AV_DIV_SELECT;
-
- return (parent_rate * div) + ((parent_rate / mfd) * mfn);
-}
-
-static int pll_av_set_rate(struct clk *clk, unsigned long rate)
-{
- void __iomem *reg = (clk == &pll4_audio) ? PLL4_AUDIO : PLL5_VIDEO;
- unsigned int parent_rate = clk_get_rate(clk->parent);
- u32 val, div;
- u32 mfn, mfd = 1000000;
- s64 temp64;
-
- if (rate < FREQ_650M || rate > FREQ_1300M)
- return -EINVAL;
-
- div = rate / parent_rate;
- temp64 = (u64) (rate - div * parent_rate);
- temp64 *= mfd;
- do_div(temp64, parent_rate);
- mfn = temp64;
-
- val = readl_relaxed(reg);
- val &= ~BM_PLL_AV_DIV_SELECT;
- val |= div << BP_PLL_AV_DIV_SELECT;
- writel_relaxed(val, reg);
- writel_relaxed(mfn, reg + PLL_NUM_OFFSET);
- writel_relaxed(mfd, reg + PLL_DENOM_OFFSET);
-
- return 0;
-}
-
-static void __iomem *pll_get_div_reg_bit(struct clk *clk, u32 *bp, u32 *bm)
-{
- void __iomem *reg;
-
- if (clk == &pll2_bus) {
- reg = PLL2_BUS;
- *bp = BP_PLL_BUS_DIV_SELECT;
- *bm = BM_PLL_BUS_DIV_SELECT;
- } else if (clk == &pll3_usb_otg) {
- reg = PLL3_USB_OTG;
- *bp = BP_PLL_USB_DIV_SELECT;
- *bm = BM_PLL_USB_DIV_SELECT;
- } else if (clk == &pll7_usb_host) {
- reg = PLL7_USB_HOST;
- *bp = BP_PLL_USB_DIV_SELECT;
- *bm = BM_PLL_USB_DIV_SELECT;
- } else {
- BUG();
- }
-
- return reg;
-}
-
-static unsigned long pll_get_rate(struct clk *clk)
-{
- void __iomem *reg;
- u32 div, bp, bm;
-
- reg = pll_get_div_reg_bit(clk, &bp, &bm);
- div = (readl_relaxed(reg) & bm) >> bp;
-
- return (div == 1) ? clk_get_rate(clk->parent) * 22 :
- clk_get_rate(clk->parent) * 20;
-}
-
-static int pll_set_rate(struct clk *clk, unsigned long rate)
-{
- void __iomem *reg;
- u32 val, div, bp, bm;
-
- if (rate == FREQ_528M)
- div = 1;
- else if (rate == FREQ_480M)
- div = 0;
- else
- return -EINVAL;
-
- reg = pll_get_div_reg_bit(clk, &bp, &bm);
- val = readl_relaxed(reg);
- val &= ~bm;
- val |= div << bp;
- writel_relaxed(val, reg);
-
- return 0;
-}
-
-#define pll2_bus_get_rate pll_get_rate
-#define pll2_bus_set_rate pll_set_rate
-#define pll3_usb_otg_get_rate pll_get_rate
-#define pll3_usb_otg_set_rate pll_set_rate
-#define pll7_usb_host_get_rate pll_get_rate
-#define pll7_usb_host_set_rate pll_set_rate
-#define pll4_audio_get_rate pll_av_get_rate
-#define pll4_audio_set_rate pll_av_set_rate
-#define pll5_video_get_rate pll_av_get_rate
-#define pll5_video_set_rate pll_av_set_rate
-#define pll6_mlb_get_rate NULL
-#define pll6_mlb_set_rate NULL
-
-#define DEF_PLL(name) \
- static struct clk name = { \
- .enable = pll_enable, \
- .disable = pll_disable, \
- .get_rate = name##_get_rate, \
- .set_rate = name##_set_rate, \
- .parent = &osc_clk, \
- }
-
-DEF_PLL(pll1_sys);
-DEF_PLL(pll2_bus);
-DEF_PLL(pll3_usb_otg);
-DEF_PLL(pll4_audio);
-DEF_PLL(pll5_video);
-DEF_PLL(pll6_mlb);
-DEF_PLL(pll7_usb_host);
-DEF_PLL(pll8_enet);
-
-static unsigned long pfd_get_rate(struct clk *clk)
-{
- u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
- u32 frac, bp_frac;
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.enable(&apbh_dma_clk);
-
- bp_frac = clk->enable_shift - 7;
- frac = readl_relaxed(clk->enable_reg) >> bp_frac & PFD_FRAC_MASK;
- do_div(tmp, frac);
-
- return tmp;
-}
-
-static int pfd_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 val, frac, bp_frac;
- u64 tmp = (u64) clk_get_rate(clk->parent) * 18;
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.enable(&apbh_dma_clk);
-
- /*
- * Round up the divider so that we don't set a rate
- * higher than what is requested
- */
- tmp += rate / 2;
- do_div(tmp, rate);
- frac = tmp;
- frac = (frac < 12) ? 12 : frac;
- frac = (frac > 35) ? 35 : frac;
-
- /*
- * The frac field always starts from 7 bits lower
- * position of enable bit
- */
- bp_frac = clk->enable_shift - 7;
- val = readl_relaxed(clk->enable_reg);
- val &= ~(PFD_FRAC_MASK << bp_frac);
- val |= frac << bp_frac;
- writel_relaxed(val, clk->enable_reg);
-
- tmp = (u64) clk_get_rate(clk->parent) * 18;
- do_div(tmp, frac);
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.disable(&apbh_dma_clk);
-
- return 0;
-}
-
-static unsigned long pfd_round_rate(struct clk *clk, unsigned long rate)
-{
- u32 frac;
- u64 tmp;
-
- tmp = (u64) clk_get_rate(clk->parent) * 18;
- tmp += rate / 2;
- do_div(tmp, rate);
- frac = tmp;
- frac = (frac < 12) ? 12 : frac;
- frac = (frac > 35) ? 35 : frac;
- tmp = (u64) clk_get_rate(clk->parent) * 18;
- do_div(tmp, frac);
-
- return tmp;
-}
-
-static int pfd_enable(struct clk *clk)
-{
- u32 val;
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.enable(&apbh_dma_clk);
-
- val = readl_relaxed(clk->enable_reg);
- val &= ~(1 << clk->enable_shift);
- writel_relaxed(val, clk->enable_reg);
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.disable(&apbh_dma_clk);
-
- return 0;
-}
-
-static void pfd_disable(struct clk *clk)
-{
- u32 val;
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.enable(&apbh_dma_clk);
-
- val = readl_relaxed(clk->enable_reg);
- val |= 1 << clk->enable_shift;
- writel_relaxed(val, clk->enable_reg);
-
- if (apbh_dma_clk.usecount == 0)
- apbh_dma_clk.disable(&apbh_dma_clk);
-}
-
-#define DEF_PFD(name, er, es, p) \
- static struct clk name = { \
- .enable_reg = er, \
- .enable_shift = es, \
- .enable = pfd_enable, \
- .disable = pfd_disable, \
- .get_rate = pfd_get_rate, \
- .set_rate = pfd_set_rate, \
- .round_rate = pfd_round_rate, \
- .parent = p, \
- }
-
-DEF_PFD(pll2_pfd_352m, PFD_528, PFD0, &pll2_bus);
-DEF_PFD(pll2_pfd_594m, PFD_528, PFD1, &pll2_bus);
-DEF_PFD(pll2_pfd_400m, PFD_528, PFD2, &pll2_bus);
-DEF_PFD(pll3_pfd_720m, PFD_480, PFD0, &pll3_usb_otg);
-DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg);
-DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
-DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
-
-static unsigned long twd_clk_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 2;
-}
-
-static struct clk twd_clk = {
- .parent = &arm_clk,
- .get_rate = twd_clk_get_rate,
-};
-
-static unsigned long pll2_200m_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 2;
-}
-
-static struct clk pll2_200m = {
- .parent = &pll2_pfd_400m,
- .get_rate = pll2_200m_get_rate,
-};
-
-static unsigned long pll3_120m_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 4;
-}
-
-static struct clk pll3_120m = {
- .parent = &pll3_usb_otg,
- .get_rate = pll3_120m_get_rate,
-};
-
-static unsigned long pll3_80m_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 6;
-}
-
-static struct clk pll3_80m = {
- .parent = &pll3_usb_otg,
- .get_rate = pll3_80m_get_rate,
-};
-
-static unsigned long pll3_60m_get_rate(struct clk *clk)
-{
- return clk_get_rate(clk->parent) / 8;
-}
-
-static struct clk pll3_60m = {
- .parent = &pll3_usb_otg,
- .get_rate = pll3_60m_get_rate,
-};
-
-static int pll1_sw_clk_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 val = readl_relaxed(CCSR);
-
- if (parent == &pll1_sys) {
- val &= ~BM_CCSR_PLL1_SW_SEL;
- val &= ~BM_CCSR_STEP_SEL;
- } else if (parent == &osc_clk) {
- val |= BM_CCSR_PLL1_SW_SEL;
- val &= ~BM_CCSR_STEP_SEL;
- } else if (parent == &pll2_pfd_400m) {
- val |= BM_CCSR_PLL1_SW_SEL;
- val |= BM_CCSR_STEP_SEL;
- } else {
- return -EINVAL;
- }
-
- writel_relaxed(val, CCSR);
-
- return 0;
-}
-
-static struct clk pll1_sw_clk = {
- .parent = &pll1_sys,
- .set_parent = pll1_sw_clk_set_parent,
-};
-
-static void calc_pred_podf_dividers(u32 div, u32 *pred, u32 *podf)
-{
- u32 min_pred, temp_pred, old_err, err;
-
- if (div >= 512) {
- *pred = 8;
- *podf = 64;
- } else if (div >= 8) {
- min_pred = (div - 1) / 64 + 1;
- old_err = 8;
- for (temp_pred = 8; temp_pred >= min_pred; temp_pred--) {
- err = div % temp_pred;
- if (err == 0) {
- *pred = temp_pred;
- break;
- }
- err = temp_pred - err;
- if (err < old_err) {
- old_err = err;
- *pred = temp_pred;
- }
- }
- *podf = (div + *pred - 1) / *pred;
- } else if (div < 8) {
- *pred = div;
- *podf = 1;
- }
-}
-
-static int _clk_enable(struct clk *clk)
-{
- u32 reg;
- reg = readl_relaxed(clk->enable_reg);
- reg |= 0x3 << clk->enable_shift;
- writel_relaxed(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void _clk_disable(struct clk *clk)
-{
- u32 reg;
- reg = readl_relaxed(clk->enable_reg);
- reg &= ~(0x3 << clk->enable_shift);
- writel_relaxed(reg, clk->enable_reg);
-}
-
-static int _clk_enable_1b(struct clk *clk)
-{
- u32 reg;
- reg = readl_relaxed(clk->enable_reg);
- reg |= 0x1 << clk->enable_shift;
- writel_relaxed(reg, clk->enable_reg);
-
- return 0;
-}
-
-static void _clk_disable_1b(struct clk *clk)
-{
- u32 reg;
- reg = readl_relaxed(clk->enable_reg);
- reg &= ~(0x1 << clk->enable_shift);
- writel_relaxed(reg, clk->enable_reg);
-}
-
-struct divider {
- struct clk *clk;
- void __iomem *reg;
- u32 bp_pred;
- u32 bm_pred;
- u32 bp_podf;
- u32 bm_podf;
-};
-
-#define DEF_CLK_DIV1(d, c, r, b) \
- static struct divider d = { \
- .clk = c, \
- .reg = r, \
- .bp_podf = BP_##r##_##b##_PODF, \
- .bm_podf = BM_##r##_##b##_PODF, \
- }
-
-DEF_CLK_DIV1(arm_div, &arm_clk, CACRR, ARM);
-DEF_CLK_DIV1(ipg_div, &ipg_clk, CBCDR, IPG);
-DEF_CLK_DIV1(ahb_div, &ahb_clk, CBCDR, AHB);
-DEF_CLK_DIV1(axi_div, &axi_clk, CBCDR, AXI);
-DEF_CLK_DIV1(mmdc_ch0_axi_div, &mmdc_ch0_axi_clk, CBCDR, MMDC_CH0_AXI);
-DEF_CLK_DIV1(mmdc_ch1_axi_div, &mmdc_ch1_axi_clk, CBCDR, MMDC_CH1_AXI);
-DEF_CLK_DIV1(periph_clk2_div, &periph_clk2_clk, CBCDR, PERIPH_CLK2);
-DEF_CLK_DIV1(periph2_clk2_div, &periph2_clk2_clk, CBCDR, PERIPH2_CLK2);
-DEF_CLK_DIV1(gpu2d_core_div, &gpu2d_core_clk, CBCMR, GPU2D_CORE);
-DEF_CLK_DIV1(gpu3d_core_div, &gpu3d_core_clk, CBCMR, GPU3D_CORE);
-DEF_CLK_DIV1(gpu3d_shader_div, &gpu3d_shader_clk, CBCMR, GPU3D_SHADER);
-DEF_CLK_DIV1(ipg_perclk_div, &ipg_perclk, CSCMR1, PERCLK);
-DEF_CLK_DIV1(emi_div, &emi_clk, CSCMR1, EMI);
-DEF_CLK_DIV1(emi_slow_div, &emi_slow_clk, CSCMR1, EMI_SLOW);
-DEF_CLK_DIV1(can_div, &can1_clk, CSCMR2, CAN);
-DEF_CLK_DIV1(uart_div, &uart_clk, CSCDR1, UART);
-DEF_CLK_DIV1(usdhc1_div, &usdhc1_clk, CSCDR1, USDHC1);
-DEF_CLK_DIV1(usdhc2_div, &usdhc2_clk, CSCDR1, USDHC2);
-DEF_CLK_DIV1(usdhc3_div, &usdhc3_clk, CSCDR1, USDHC3);
-DEF_CLK_DIV1(usdhc4_div, &usdhc4_clk, CSCDR1, USDHC4);
-DEF_CLK_DIV1(vpu_div, &vpu_clk, CSCDR1, VPU_AXI);
-DEF_CLK_DIV1(hsi_tx_div, &hsi_tx_clk, CDCDR, HSI_TX);
-DEF_CLK_DIV1(ipu1_di0_pre_div, &ipu1_di0_pre_clk, CHSCCDR, IPU1_DI0_PRE);
-DEF_CLK_DIV1(ipu1_di1_pre_div, &ipu1_di1_pre_clk, CHSCCDR, IPU1_DI1_PRE);
-DEF_CLK_DIV1(ipu2_di0_pre_div, &ipu2_di0_pre_clk, CSCDR2, IPU2_DI0_PRE);
-DEF_CLK_DIV1(ipu2_di1_pre_div, &ipu2_di1_pre_clk, CSCDR2, IPU2_DI1_PRE);
-DEF_CLK_DIV1(ipu1_div, &ipu1_clk, CSCDR3, IPU1_HSP);
-DEF_CLK_DIV1(ipu2_div, &ipu2_clk, CSCDR3, IPU2_HSP);
-DEF_CLK_DIV1(cko1_div, &cko1_clk, CCOSR, CKO1);
-
-#define DEF_CLK_DIV2(d, c, r, b) \
- static struct divider d = { \
- .clk = c, \
- .reg = r, \
- .bp_pred = BP_##r##_##b##_PRED, \
- .bm_pred = BM_##r##_##b##_PRED, \
- .bp_podf = BP_##r##_##b##_PODF, \
- .bm_podf = BM_##r##_##b##_PODF, \
- }
-
-DEF_CLK_DIV2(ssi1_div, &ssi1_clk, CS1CDR, SSI1);
-DEF_CLK_DIV2(ssi3_div, &ssi3_clk, CS1CDR, SSI3);
-DEF_CLK_DIV2(esai_div, &esai_clk, CS1CDR, ESAI);
-DEF_CLK_DIV2(ssi2_div, &ssi2_clk, CS2CDR, SSI2);
-DEF_CLK_DIV2(enfc_div, &enfc_clk, CS2CDR, ENFC);
-DEF_CLK_DIV2(spdif_div, &spdif_clk, CDCDR, SPDIF);
-DEF_CLK_DIV2(asrc_serial_div, &asrc_serial_clk, CDCDR, ASRC_SERIAL);
-
-static struct divider *dividers[] = {
- &arm_div,
- &ipg_div,
- &ahb_div,
- &axi_div,
- &mmdc_ch0_axi_div,
- &mmdc_ch1_axi_div,
- &periph_clk2_div,
- &periph2_clk2_div,
- &gpu2d_core_div,
- &gpu3d_core_div,
- &gpu3d_shader_div,
- &ipg_perclk_div,
- &emi_div,
- &emi_slow_div,
- &can_div,
- &uart_div,
- &usdhc1_div,
- &usdhc2_div,
- &usdhc3_div,
- &usdhc4_div,
- &vpu_div,
- &hsi_tx_div,
- &ipu1_di0_pre_div,
- &ipu1_di1_pre_div,
- &ipu2_di0_pre_div,
- &ipu2_di1_pre_div,
- &ipu1_div,
- &ipu2_div,
- &ssi1_div,
- &ssi3_div,
- &esai_div,
- &ssi2_div,
- &enfc_div,
- &spdif_div,
- &asrc_serial_div,
- &cko1_div,
-};
-
-static unsigned long ldb_di_clk_get_rate(struct clk *clk)
-{
- u32 val = readl_relaxed(CSCMR2);
-
- val &= (clk == &ldb_di0_clk) ? BM_CSCMR2_LDB_DI0_IPU_DIV :
- BM_CSCMR2_LDB_DI1_IPU_DIV;
- if (val)
- return clk_get_rate(clk->parent) / 7;
- else
- return clk_get_rate(clk->parent) * 2 / 7;
-}
-
-static int ldb_di_clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- u32 val = readl_relaxed(CSCMR2);
-
- if (rate * 7 <= parent_rate + parent_rate / 20)
- val |= BM_CSCMR2_LDB_DI0_IPU_DIV;
- else
- val &= ~BM_CSCMR2_LDB_DI0_IPU_DIV;
-
- writel_relaxed(val, CSCMR2);
-
- return 0;
-}
-
-static unsigned long ldb_di_clk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
-
- if (rate * 7 <= parent_rate + parent_rate / 20)
- return parent_rate / 7;
- else
- return 2 * parent_rate / 7;
-}
-
-static unsigned long _clk_get_rate(struct clk *clk)
-{
- struct divider *d;
- u32 val, pred, podf;
- int i, num;
-
- if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
- return ldb_di_clk_get_rate(clk);
-
- num = ARRAY_SIZE(dividers);
- for (i = 0; i < num; i++)
- if (dividers[i]->clk == clk) {
- d = dividers[i];
- break;
- }
- if (i == num)
- return clk_get_rate(clk->parent);
-
- val = readl_relaxed(d->reg);
- pred = ((val & d->bm_pred) >> d->bp_pred) + 1;
- podf = ((val & d->bm_podf) >> d->bp_podf) + 1;
-
- return clk_get_rate(clk->parent) / (pred * podf);
-}
-
-static int clk_busy_wait(struct clk *clk)
-{
- int timeout = 0x100000;
- u32 bm;
-
- if (clk == &axi_clk)
- bm = BM_CDHIPR_AXI_PODF_BUSY;
- else if (clk == &ahb_clk)
- bm = BM_CDHIPR_AHB_PODF_BUSY;
- else if (clk == &mmdc_ch0_axi_clk)
- bm = BM_CDHIPR_MMDC_CH0_PODF_BUSY;
- else if (clk == &periph_clk)
- bm = BM_CDHIPR_PERIPH_SEL_BUSY;
- else if (clk == &arm_clk)
- bm = BM_CDHIPR_ARM_PODF_BUSY;
- else
- return -EINVAL;
-
- while ((readl_relaxed(CDHIPR) & bm) && --timeout)
- cpu_relax();
-
- if (unlikely(!timeout))
- return -EBUSY;
-
- return 0;
-}
-
-static int _clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- struct divider *d;
- u32 val, div, max_div, pred = 0, podf;
- int i, num;
-
- if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
- return ldb_di_clk_set_rate(clk, rate);
-
- num = ARRAY_SIZE(dividers);
- for (i = 0; i < num; i++)
- if (dividers[i]->clk == clk) {
- d = dividers[i];
- break;
- }
- if (i == num)
- return -EINVAL;
-
- max_div = ((d->bm_pred >> d->bp_pred) + 1) *
- ((d->bm_podf >> d->bp_podf) + 1);
-
- div = parent_rate / rate;
- if (div == 0)
- div++;
-
- if ((parent_rate / div != rate) || div > max_div)
- return -EINVAL;
-
- if (d->bm_pred) {
- calc_pred_podf_dividers(div, &pred, &podf);
- } else {
- pred = 1;
- podf = div;
- }
-
- val = readl_relaxed(d->reg);
- val &= ~(d->bm_pred | d->bm_podf);
- val |= (pred - 1) << d->bp_pred | (podf - 1) << d->bp_podf;
- writel_relaxed(val, d->reg);
-
- if (clk == &axi_clk || clk == &ahb_clk ||
- clk == &mmdc_ch0_axi_clk || clk == &arm_clk)
- return clk_busy_wait(clk);
-
- return 0;
-}
-
-static unsigned long _clk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long parent_rate = clk_get_rate(clk->parent);
- u32 div = parent_rate / rate;
- u32 div_max, pred = 0, podf;
- struct divider *d;
- int i, num;
-
- if (clk == &ldb_di0_clk || clk == &ldb_di1_clk)
- return ldb_di_clk_round_rate(clk, rate);
-
- num = ARRAY_SIZE(dividers);
- for (i = 0; i < num; i++)
- if (dividers[i]->clk == clk) {
- d = dividers[i];
- break;
- }
- if (i == num)
- return -EINVAL;
-
- if (div == 0 || parent_rate % rate)
- div++;
-
- if (d->bm_pred) {
- calc_pred_podf_dividers(div, &pred, &podf);
- div = pred * podf;
- } else {
- div_max = (d->bm_podf >> d->bp_podf) + 1;
- if (div > div_max)
- div = div_max;
- }
-
- return parent_rate / div;
-}
-
-struct multiplexer {
- struct clk *clk;
- void __iomem *reg;
- u32 bp;
- u32 bm;
- int pnum;
- struct clk *parents[];
-};
-
-static struct multiplexer axi_mux = {
- .clk = &axi_clk,
- .reg = CBCDR,
- .bp = BP_CBCDR_AXI_SEL,
- .bm = BM_CBCDR_AXI_SEL,
- .parents = {
- &periph_clk,
- &pll2_pfd_400m,
- &pll3_pfd_540m,
- NULL
- },
-};
-
-static struct multiplexer periph_mux = {
- .clk = &periph_clk,
- .reg = CBCDR,
- .bp = BP_CBCDR_PERIPH_CLK_SEL,
- .bm = BM_CBCDR_PERIPH_CLK_SEL,
- .parents = {
- &periph_pre_clk,
- &periph_clk2_clk,
- NULL
- },
-};
-
-static struct multiplexer periph_pre_mux = {
- .clk = &periph_pre_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_PRE_PERIPH_CLK_SEL,
- .bm = BM_CBCMR_PRE_PERIPH_CLK_SEL,
- .parents = {
- &pll2_bus,
- &pll2_pfd_400m,
- &pll2_pfd_352m,
- &pll2_200m,
- NULL
- },
-};
-
-static struct multiplexer periph_clk2_mux = {
- .clk = &periph_clk2_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_PERIPH_CLK2_SEL,
- .bm = BM_CBCMR_PERIPH_CLK2_SEL,
- .parents = {
- &pll3_usb_otg,
- &osc_clk,
- NULL
- },
-};
-
-static struct multiplexer periph2_mux = {
- .clk = &periph2_clk,
- .reg = CBCDR,
- .bp = BP_CBCDR_PERIPH2_CLK_SEL,
- .bm = BM_CBCDR_PERIPH2_CLK_SEL,
- .parents = {
- &periph2_pre_clk,
- &periph2_clk2_clk,
- NULL
- },
-};
-
-static struct multiplexer periph2_pre_mux = {
- .clk = &periph2_pre_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_PRE_PERIPH2_CLK_SEL,
- .bm = BM_CBCMR_PRE_PERIPH2_CLK_SEL,
- .parents = {
- &pll2_bus,
- &pll2_pfd_400m,
- &pll2_pfd_352m,
- &pll2_200m,
- NULL
- },
-};
-
-static struct multiplexer periph2_clk2_mux = {
- .clk = &periph2_clk2_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_PERIPH2_CLK2_SEL,
- .bm = BM_CBCMR_PERIPH2_CLK2_SEL,
- .parents = {
- &pll3_usb_otg,
- &osc_clk,
- NULL
- },
-};
-
-static struct multiplexer gpu2d_axi_mux = {
- .clk = &gpu2d_axi_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_GPU2D_AXI_SEL,
- .bm = BM_CBCMR_GPU2D_AXI_SEL,
- .parents = {
- &axi_clk,
- &ahb_clk,
- NULL
- },
-};
-
-static struct multiplexer gpu3d_axi_mux = {
- .clk = &gpu3d_axi_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_GPU3D_AXI_SEL,
- .bm = BM_CBCMR_GPU3D_AXI_SEL,
- .parents = {
- &axi_clk,
- &ahb_clk,
- NULL
- },
-};
-
-static struct multiplexer gpu3d_core_mux = {
- .clk = &gpu3d_core_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_GPU3D_CORE_SEL,
- .bm = BM_CBCMR_GPU3D_CORE_SEL,
- .parents = {
- &mmdc_ch0_axi_clk,
- &pll3_usb_otg,
- &pll2_pfd_594m,
- &pll2_pfd_400m,
- NULL
- },
-};
-
-static struct multiplexer gpu3d_shader_mux = {
- .clk = &gpu3d_shader_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_GPU3D_SHADER_SEL,
- .bm = BM_CBCMR_GPU3D_SHADER_SEL,
- .parents = {
- &mmdc_ch0_axi_clk,
- &pll3_usb_otg,
- &pll2_pfd_594m,
- &pll3_pfd_720m,
- NULL
- },
-};
-
-static struct multiplexer pcie_axi_mux = {
- .clk = &pcie_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_PCIE_AXI_SEL,
- .bm = BM_CBCMR_PCIE_AXI_SEL,
- .parents = {
- &axi_clk,
- &ahb_clk,
- NULL
- },
-};
-
-static struct multiplexer vdo_axi_mux = {
- .clk = &vdo_axi_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_VDO_AXI_SEL,
- .bm = BM_CBCMR_VDO_AXI_SEL,
- .parents = {
- &axi_clk,
- &ahb_clk,
- NULL
- },
-};
-
-static struct multiplexer vpu_axi_mux = {
- .clk = &vpu_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_VPU_AXI_SEL,
- .bm = BM_CBCMR_VPU_AXI_SEL,
- .parents = {
- &axi_clk,
- &pll2_pfd_400m,
- &pll2_pfd_352m,
- NULL
- },
-};
-
-static struct multiplexer gpu2d_core_mux = {
- .clk = &gpu2d_core_clk,
- .reg = CBCMR,
- .bp = BP_CBCMR_GPU2D_CORE_SEL,
- .bm = BM_CBCMR_GPU2D_CORE_SEL,
- .parents = {
- &axi_clk,
- &pll3_usb_otg,
- &pll2_pfd_352m,
- &pll2_pfd_400m,
- NULL
- },
-};
-
-#define DEF_SSI_MUX(id) \
- static struct multiplexer ssi##id##_mux = { \
- .clk = &ssi##id##_clk, \
- .reg = CSCMR1, \
- .bp = BP_CSCMR1_SSI##id##_SEL, \
- .bm = BM_CSCMR1_SSI##id##_SEL, \
- .parents = { \
- &pll3_pfd_508m, \
- &pll3_pfd_454m, \
- &pll4_audio, \
- NULL \
- }, \
- }
-
-DEF_SSI_MUX(1);
-DEF_SSI_MUX(2);
-DEF_SSI_MUX(3);
-
-#define DEF_USDHC_MUX(id) \
- static struct multiplexer usdhc##id##_mux = { \
- .clk = &usdhc##id##_clk, \
- .reg = CSCMR1, \
- .bp = BP_CSCMR1_USDHC##id##_SEL, \
- .bm = BM_CSCMR1_USDHC##id##_SEL, \
- .parents = { \
- &pll2_pfd_400m, \
- &pll2_pfd_352m, \
- NULL \
- }, \
- }
-
-DEF_USDHC_MUX(1);
-DEF_USDHC_MUX(2);
-DEF_USDHC_MUX(3);
-DEF_USDHC_MUX(4);
-
-static struct multiplexer emi_mux = {
- .clk = &emi_clk,
- .reg = CSCMR1,
- .bp = BP_CSCMR1_EMI_SEL,
- .bm = BM_CSCMR1_EMI_SEL,
- .parents = {
- &axi_clk,
- &pll3_usb_otg,
- &pll2_pfd_400m,
- &pll2_pfd_352m,
- NULL
- },
-};
-
-static struct multiplexer emi_slow_mux = {
- .clk = &emi_slow_clk,
- .reg = CSCMR1,
- .bp = BP_CSCMR1_EMI_SLOW_SEL,
- .bm = BM_CSCMR1_EMI_SLOW_SEL,
- .parents = {
- &axi_clk,
- &pll3_usb_otg,
- &pll2_pfd_400m,
- &pll2_pfd_352m,
- NULL
- },
-};
-
-static struct multiplexer esai_mux = {
- .clk = &esai_clk,
- .reg = CSCMR2,
- .bp = BP_CSCMR2_ESAI_SEL,
- .bm = BM_CSCMR2_ESAI_SEL,
- .parents = {
- &pll4_audio,
- &pll3_pfd_508m,
- &pll3_pfd_454m,
- &pll3_usb_otg,
- NULL
- },
-};
-
-#define DEF_LDB_DI_MUX(id) \
- static struct multiplexer ldb_di##id##_mux = { \
- .clk = &ldb_di##id##_clk, \
- .reg = CS2CDR, \
- .bp = BP_CS2CDR_LDB_DI##id##_SEL, \
- .bm = BM_CS2CDR_LDB_DI##id##_SEL, \
- .parents = { \
- &pll5_video, \
- &pll2_pfd_352m, \
- &pll2_pfd_400m, \
- &pll3_pfd_540m, \
- &pll3_usb_otg, \
- NULL \
- }, \
- }
-
-DEF_LDB_DI_MUX(0);
-DEF_LDB_DI_MUX(1);
-
-static struct multiplexer enfc_mux = {
- .clk = &enfc_clk,
- .reg = CS2CDR,
- .bp = BP_CS2CDR_ENFC_SEL,
- .bm = BM_CS2CDR_ENFC_SEL,
- .parents = {
- &pll2_pfd_352m,
- &pll2_bus,
- &pll3_usb_otg,
- &pll2_pfd_400m,
- NULL
- },
-};
-
-static struct multiplexer spdif_mux = {
- .clk = &spdif_clk,
- .reg = CDCDR,
- .bp = BP_CDCDR_SPDIF_SEL,
- .bm = BM_CDCDR_SPDIF_SEL,
- .parents = {
- &pll4_audio,
- &pll3_pfd_508m,
- &pll3_pfd_454m,
- &pll3_usb_otg,
- NULL
- },
-};
-
-static struct multiplexer asrc_serial_mux = {
- .clk = &asrc_serial_clk,
- .reg = CDCDR,
- .bp = BP_CDCDR_ASRC_SERIAL_SEL,
- .bm = BM_CDCDR_ASRC_SERIAL_SEL,
- .parents = {
- &pll4_audio,
- &pll3_pfd_508m,
- &pll3_pfd_454m,
- &pll3_usb_otg,
- NULL
- },
-};
-
-static struct multiplexer hsi_tx_mux = {
- .clk = &hsi_tx_clk,
- .reg = CDCDR,
- .bp = BP_CDCDR_HSI_TX_SEL,
- .bm = BM_CDCDR_HSI_TX_SEL,
- .parents = {
- &pll3_120m,
- &pll2_pfd_400m,
- NULL
- },
-};
-
-#define DEF_IPU_DI_PRE_MUX(r, i, d) \
- static struct multiplexer ipu##i##_di##d##_pre_mux = { \
- .clk = &ipu##i##_di##d##_pre_clk, \
- .reg = r, \
- .bp = BP_##r##_IPU##i##_DI##d##_PRE_SEL, \
- .bm = BM_##r##_IPU##i##_DI##d##_PRE_SEL, \
- .parents = { \
- &mmdc_ch0_axi_clk, \
- &pll3_usb_otg, \
- &pll5_video, \
- &pll2_pfd_352m, \
- &pll2_pfd_400m, \
- &pll3_pfd_540m, \
- NULL \
- }, \
- }
-
-DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 0);
-DEF_IPU_DI_PRE_MUX(CHSCCDR, 1, 1);
-DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 0);
-DEF_IPU_DI_PRE_MUX(CSCDR2, 2, 1);
-
-#define DEF_IPU_DI_MUX(r, i, d) \
- static struct multiplexer ipu##i##_di##d##_mux = { \
- .clk = &ipu##i##_di##d##_clk, \
- .reg = r, \
- .bp = BP_##r##_IPU##i##_DI##d##_SEL, \
- .bm = BM_##r##_IPU##i##_DI##d##_SEL, \
- .parents = { \
- &ipu##i##_di##d##_pre_clk, \
- &dummy_clk, \
- &dummy_clk, \
- &ldb_di0_clk, \
- &ldb_di1_clk, \
- NULL \
- }, \
- }
-
-DEF_IPU_DI_MUX(CHSCCDR, 1, 0);
-DEF_IPU_DI_MUX(CHSCCDR, 1, 1);
-DEF_IPU_DI_MUX(CSCDR2, 2, 0);
-DEF_IPU_DI_MUX(CSCDR2, 2, 1);
-
-#define DEF_IPU_MUX(id) \
- static struct multiplexer ipu##id##_mux = { \
- .clk = &ipu##id##_clk, \
- .reg = CSCDR3, \
- .bp = BP_CSCDR3_IPU##id##_HSP_SEL, \
- .bm = BM_CSCDR3_IPU##id##_HSP_SEL, \
- .parents = { \
- &mmdc_ch0_axi_clk, \
- &pll2_pfd_400m, \
- &pll3_120m, \
- &pll3_pfd_540m, \
- NULL \
- }, \
- }
-
-DEF_IPU_MUX(1);
-DEF_IPU_MUX(2);
-
-static struct multiplexer cko1_mux = {
- .clk = &cko1_clk,
- .reg = CCOSR,
- .bp = BP_CCOSR_CKO1_SEL,
- .bm = BM_CCOSR_CKO1_SEL,
- .parents = {
- &pll3_usb_otg,
- &pll2_bus,
- &pll1_sys,
- &pll5_video,
- &dummy_clk,
- &axi_clk,
- &enfc_clk,
- &ipu1_di0_clk,
- &ipu1_di1_clk,
- &ipu2_di0_clk,
- &ipu2_di1_clk,
- &ahb_clk,
- &ipg_clk,
- &ipg_perclk,
- &ckil_clk,
- &pll4_audio,
- NULL
- },
-};
-
-static struct multiplexer *multiplexers[] = {
- &axi_mux,
- &periph_mux,
- &periph_pre_mux,
- &periph_clk2_mux,
- &periph2_mux,
- &periph2_pre_mux,
- &periph2_clk2_mux,
- &gpu2d_axi_mux,
- &gpu3d_axi_mux,
- &gpu3d_core_mux,
- &gpu3d_shader_mux,
- &pcie_axi_mux,
- &vdo_axi_mux,
- &vpu_axi_mux,
- &gpu2d_core_mux,
- &ssi1_mux,
- &ssi2_mux,
- &ssi3_mux,
- &usdhc1_mux,
- &usdhc2_mux,
- &usdhc3_mux,
- &usdhc4_mux,
- &emi_mux,
- &emi_slow_mux,
- &esai_mux,
- &ldb_di0_mux,
- &ldb_di1_mux,
- &enfc_mux,
- &spdif_mux,
- &asrc_serial_mux,
- &hsi_tx_mux,
- &ipu1_di0_pre_mux,
- &ipu1_di0_mux,
- &ipu1_di1_pre_mux,
- &ipu1_di1_mux,
- &ipu2_di0_pre_mux,
- &ipu2_di0_mux,
- &ipu2_di1_pre_mux,
- &ipu2_di1_mux,
- &ipu1_mux,
- &ipu2_mux,
- &cko1_mux,
-};
-
-static int _clk_set_parent(struct clk *clk, struct clk *parent)
-{
- struct multiplexer *m;
- int i, num;
- u32 val;
-
- num = ARRAY_SIZE(multiplexers);
- for (i = 0; i < num; i++)
- if (multiplexers[i]->clk == clk) {
- m = multiplexers[i];
- break;
- }
- if (i == num)
- return -EINVAL;
-
- i = 0;
- while (m->parents[i]) {
- if (parent == m->parents[i])
- break;
- i++;
- }
- if (!m->parents[i] || m->parents[i] == &dummy_clk)
- return -EINVAL;
-
- val = readl_relaxed(m->reg);
- val &= ~m->bm;
- val |= i << m->bp;
- writel_relaxed(val, m->reg);
-
- if (clk == &periph_clk)
- return clk_busy_wait(clk);
-
- return 0;
-}
-
-#define DEF_NG_CLK(name, p) \
- static struct clk name = { \
- .get_rate = _clk_get_rate, \
- .set_rate = _clk_set_rate, \
- .round_rate = _clk_round_rate, \
- .set_parent = _clk_set_parent, \
- .parent = p, \
- }
-
-DEF_NG_CLK(periph_clk2_clk, &osc_clk);
-DEF_NG_CLK(periph_pre_clk, &pll2_bus);
-DEF_NG_CLK(periph_clk, &periph_pre_clk);
-DEF_NG_CLK(periph2_clk2_clk, &osc_clk);
-DEF_NG_CLK(periph2_pre_clk, &pll2_bus);
-DEF_NG_CLK(periph2_clk, &periph2_pre_clk);
-DEF_NG_CLK(axi_clk, &periph_clk);
-DEF_NG_CLK(emi_clk, &axi_clk);
-DEF_NG_CLK(arm_clk, &pll1_sw_clk);
-DEF_NG_CLK(ahb_clk, &periph_clk);
-DEF_NG_CLK(ipg_clk, &ahb_clk);
-DEF_NG_CLK(ipg_perclk, &ipg_clk);
-DEF_NG_CLK(ipu1_di0_pre_clk, &pll3_pfd_540m);
-DEF_NG_CLK(ipu1_di1_pre_clk, &pll3_pfd_540m);
-DEF_NG_CLK(ipu2_di0_pre_clk, &pll3_pfd_540m);
-DEF_NG_CLK(ipu2_di1_pre_clk, &pll3_pfd_540m);
-DEF_NG_CLK(asrc_serial_clk, &pll3_usb_otg);
-
-#define DEF_CLK(name, er, es, p, s) \
- static struct clk name = { \
- .enable_reg = er, \
- .enable_shift = es, \
- .enable = _clk_enable, \
- .disable = _clk_disable, \
- .get_rate = _clk_get_rate, \
- .set_rate = _clk_set_rate, \
- .round_rate = _clk_round_rate, \
- .set_parent = _clk_set_parent, \
- .parent = p, \
- .secondary = s, \
- }
-
-#define DEF_CLK_1B(name, er, es, p, s) \
- static struct clk name = { \
- .enable_reg = er, \
- .enable_shift = es, \
- .enable = _clk_enable_1b, \
- .disable = _clk_disable_1b, \
- .get_rate = _clk_get_rate, \
- .set_rate = _clk_set_rate, \
- .round_rate = _clk_round_rate, \
- .set_parent = _clk_set_parent, \
- .parent = p, \
- .secondary = s, \
- }
-
-DEF_CLK(aips_tz1_clk, CCGR0, CG0, &ahb_clk, NULL);
-DEF_CLK(aips_tz2_clk, CCGR0, CG1, &ahb_clk, NULL);
-DEF_CLK(apbh_dma_clk, CCGR0, CG2, &ahb_clk, NULL);
-DEF_CLK(asrc_clk, CCGR0, CG3, &pll4_audio, NULL);
-DEF_CLK(can1_serial_clk, CCGR0, CG8, &pll3_usb_otg, NULL);
-DEF_CLK(can1_clk, CCGR0, CG7, &pll3_usb_otg, &can1_serial_clk);
-DEF_CLK(can2_serial_clk, CCGR0, CG10, &pll3_usb_otg, NULL);
-DEF_CLK(can2_clk, CCGR0, CG9, &pll3_usb_otg, &can2_serial_clk);
-DEF_CLK(ecspi1_clk, CCGR1, CG0, &pll3_60m, NULL);
-DEF_CLK(ecspi2_clk, CCGR1, CG1, &pll3_60m, NULL);
-DEF_CLK(ecspi3_clk, CCGR1, CG2, &pll3_60m, NULL);
-DEF_CLK(ecspi4_clk, CCGR1, CG3, &pll3_60m, NULL);
-DEF_CLK(ecspi5_clk, CCGR1, CG4, &pll3_60m, NULL);
-DEF_CLK(enet_clk, CCGR1, CG5, &ipg_clk, NULL);
-DEF_CLK(esai_clk, CCGR1, CG8, &pll3_usb_otg, NULL);
-DEF_CLK(gpt_serial_clk, CCGR1, CG11, &ipg_perclk, NULL);
-DEF_CLK(gpt_clk, CCGR1, CG10, &ipg_perclk, &gpt_serial_clk);
-DEF_CLK(gpu2d_core_clk, CCGR1, CG12, &pll2_pfd_352m, &gpu2d_axi_clk);
-DEF_CLK(gpu3d_core_clk, CCGR1, CG13, &pll2_pfd_594m, &gpu3d_axi_clk);
-DEF_CLK(gpu3d_shader_clk, CCGR1, CG13, &pll3_pfd_720m, &gpu3d_axi_clk);
-DEF_CLK(hdmi_iahb_clk, CCGR2, CG0, &ahb_clk, NULL);
-DEF_CLK(hdmi_isfr_clk, CCGR2, CG2, &pll3_pfd_540m, &hdmi_iahb_clk);
-DEF_CLK(i2c1_clk, CCGR2, CG3, &ipg_perclk, NULL);
-DEF_CLK(i2c2_clk, CCGR2, CG4, &ipg_perclk, NULL);
-DEF_CLK(i2c3_clk, CCGR2, CG5, &ipg_perclk, NULL);
-DEF_CLK(iim_clk, CCGR2, CG6, &ipg_clk, NULL);
-DEF_CLK(enfc_clk, CCGR2, CG7, &pll2_pfd_352m, NULL);
-DEF_CLK(ipu1_clk, CCGR3, CG0, &mmdc_ch0_axi_clk, NULL);
-DEF_CLK(ipu1_di0_clk, CCGR3, CG1, &ipu1_di0_pre_clk, NULL);
-DEF_CLK(ipu1_di1_clk, CCGR3, CG2, &ipu1_di1_pre_clk, NULL);
-DEF_CLK(ipu2_clk, CCGR3, CG3, &mmdc_ch0_axi_clk, NULL);
-DEF_CLK(ipu2_di0_clk, CCGR3, CG4, &ipu2_di0_pre_clk, NULL);
-DEF_CLK(ipu2_di1_clk, CCGR3, CG5, &ipu2_di1_pre_clk, NULL);
-DEF_CLK(ldb_di0_clk, CCGR3, CG6, &pll3_pfd_540m, NULL);
-DEF_CLK(ldb_di1_clk, CCGR3, CG7, &pll3_pfd_540m, NULL);
-DEF_CLK(hsi_tx_clk, CCGR3, CG8, &pll2_pfd_400m, NULL);
-DEF_CLK(mlb_clk, CCGR3, CG9, &pll6_mlb, NULL);
-DEF_CLK(mmdc_ch0_ipg_clk, CCGR3, CG12, &ipg_clk, NULL);
-DEF_CLK(mmdc_ch0_axi_clk, CCGR3, CG10, &periph_clk, &mmdc_ch0_ipg_clk);
-DEF_CLK(mmdc_ch1_ipg_clk, CCGR3, CG13, &ipg_clk, NULL);
-DEF_CLK(mmdc_ch1_axi_clk, CCGR3, CG11, &periph2_clk, &mmdc_ch1_ipg_clk);
-DEF_CLK(openvg_axi_clk, CCGR3, CG13, &axi_clk, NULL);
-DEF_CLK(pwm1_clk, CCGR4, CG8, &ipg_perclk, NULL);
-DEF_CLK(pwm2_clk, CCGR4, CG9, &ipg_perclk, NULL);
-DEF_CLK(pwm3_clk, CCGR4, CG10, &ipg_perclk, NULL);
-DEF_CLK(pwm4_clk, CCGR4, CG11, &ipg_perclk, NULL);
-DEF_CLK(gpmi_bch_apb_clk, CCGR4, CG12, &usdhc3_clk, NULL);
-DEF_CLK(gpmi_bch_clk, CCGR4, CG13, &usdhc4_clk, &gpmi_bch_apb_clk);
-DEF_CLK(gpmi_apb_clk, CCGR4, CG15, &usdhc3_clk, &gpmi_bch_clk);
-DEF_CLK(gpmi_io_clk, CCGR4, CG14, &enfc_clk, &gpmi_apb_clk);
-DEF_CLK(sdma_clk, CCGR5, CG3, &ahb_clk, NULL);
-DEF_CLK(spba_clk, CCGR5, CG6, &ipg_clk, NULL);
-DEF_CLK(spdif_clk, CCGR5, CG7, &pll3_usb_otg, &spba_clk);
-DEF_CLK(ssi1_clk, CCGR5, CG9, &pll3_pfd_508m, NULL);
-DEF_CLK(ssi2_clk, CCGR5, CG10, &pll3_pfd_508m, NULL);
-DEF_CLK(ssi3_clk, CCGR5, CG11, &pll3_pfd_508m, NULL);
-DEF_CLK(uart_serial_clk, CCGR5, CG13, &pll3_usb_otg, NULL);
-DEF_CLK(uart_clk, CCGR5, CG12, &pll3_80m, &uart_serial_clk);
-DEF_CLK(usboh3_clk, CCGR6, CG0, &ipg_clk, NULL);
-DEF_CLK(usdhc1_clk, CCGR6, CG1, &pll2_pfd_400m, NULL);
-DEF_CLK(usdhc2_clk, CCGR6, CG2, &pll2_pfd_400m, NULL);
-DEF_CLK(usdhc3_clk, CCGR6, CG3, &pll2_pfd_400m, NULL);
-DEF_CLK(usdhc4_clk, CCGR6, CG4, &pll2_pfd_400m, NULL);
-DEF_CLK(emi_slow_clk, CCGR6, CG5, &axi_clk, NULL);
-DEF_CLK(vdo_axi_clk, CCGR6, CG6, &axi_clk, NULL);
-DEF_CLK(vpu_clk, CCGR6, CG7, &axi_clk, NULL);
-DEF_CLK_1B(cko1_clk, CCOSR, BP_CCOSR_CKO1_EN, &pll2_bus, NULL);
-
-static int pcie_clk_enable(struct clk *clk)
-{
- u32 val;
-
- val = readl_relaxed(PLL8_ENET);
- val |= BM_PLL_ENET_EN_PCIE;
- writel_relaxed(val, PLL8_ENET);
-
- return _clk_enable(clk);
-}
-
-static void pcie_clk_disable(struct clk *clk)
-{
- u32 val;
-
- _clk_disable(clk);
-
- val = readl_relaxed(PLL8_ENET);
- val &= BM_PLL_ENET_EN_PCIE;
- writel_relaxed(val, PLL8_ENET);
-}
-
-static struct clk pcie_clk = {
- .enable_reg = CCGR4,
- .enable_shift = CG0,
- .enable = pcie_clk_enable,
- .disable = pcie_clk_disable,
- .set_parent = _clk_set_parent,
- .parent = &axi_clk,
- .secondary = &pll8_enet,
-};
-
-static int sata_clk_enable(struct clk *clk)
-{
- u32 val;
-
- val = readl_relaxed(PLL8_ENET);
- val |= BM_PLL_ENET_EN_SATA;
- writel_relaxed(val, PLL8_ENET);
-
- return _clk_enable(clk);
-}
-
-static void sata_clk_disable(struct clk *clk)
-{
- u32 val;
-
- _clk_disable(clk);
-
- val = readl_relaxed(PLL8_ENET);
- val &= BM_PLL_ENET_EN_SATA;
- writel_relaxed(val, PLL8_ENET);
-}
-
-static struct clk sata_clk = {
- .enable_reg = CCGR5,
- .enable_shift = CG2,
- .enable = sata_clk_enable,
- .disable = sata_clk_disable,
- .parent = &ipg_clk,
- .secondary = &pll8_enet,
-};
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- }
-
-static struct clk_lookup lookups[] = {
- _REGISTER_CLOCK("2020000.uart", NULL, uart_clk),
- _REGISTER_CLOCK("21e8000.uart", NULL, uart_clk),
- _REGISTER_CLOCK("21ec000.uart", NULL, uart_clk),
- _REGISTER_CLOCK("21f0000.uart", NULL, uart_clk),
- _REGISTER_CLOCK("21f4000.uart", NULL, uart_clk),
- _REGISTER_CLOCK("2188000.enet", NULL, enet_clk),
- _REGISTER_CLOCK("2190000.usdhc", NULL, usdhc1_clk),
- _REGISTER_CLOCK("2194000.usdhc", NULL, usdhc2_clk),
- _REGISTER_CLOCK("2198000.usdhc", NULL, usdhc3_clk),
- _REGISTER_CLOCK("219c000.usdhc", NULL, usdhc4_clk),
- _REGISTER_CLOCK("21a0000.i2c", NULL, i2c1_clk),
- _REGISTER_CLOCK("21a4000.i2c", NULL, i2c2_clk),
- _REGISTER_CLOCK("21a8000.i2c", NULL, i2c3_clk),
- _REGISTER_CLOCK("2008000.ecspi", NULL, ecspi1_clk),
- _REGISTER_CLOCK("200c000.ecspi", NULL, ecspi2_clk),
- _REGISTER_CLOCK("2010000.ecspi", NULL, ecspi3_clk),
- _REGISTER_CLOCK("2014000.ecspi", NULL, ecspi4_clk),
- _REGISTER_CLOCK("2018000.ecspi", NULL, ecspi5_clk),
- _REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
- _REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
- _REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
- _REGISTER_CLOCK("smp_twd", NULL, twd_clk),
- _REGISTER_CLOCK(NULL, "ckih", ckih_clk),
- _REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
- _REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),
- _REGISTER_CLOCK(NULL, "aips_tz2_clk", aips_tz2_clk),
- _REGISTER_CLOCK(NULL, "asrc_clk", asrc_clk),
- _REGISTER_CLOCK(NULL, "can2_clk", can2_clk),
- _REGISTER_CLOCK(NULL, "hdmi_isfr_clk", hdmi_isfr_clk),
- _REGISTER_CLOCK(NULL, "iim_clk", iim_clk),
- _REGISTER_CLOCK(NULL, "mlb_clk", mlb_clk),
- _REGISTER_CLOCK(NULL, "openvg_axi_clk", openvg_axi_clk),
- _REGISTER_CLOCK(NULL, "pwm1_clk", pwm1_clk),
- _REGISTER_CLOCK(NULL, "pwm2_clk", pwm2_clk),
- _REGISTER_CLOCK(NULL, "pwm3_clk", pwm3_clk),
- _REGISTER_CLOCK(NULL, "pwm4_clk", pwm4_clk),
- _REGISTER_CLOCK(NULL, "gpmi_io_clk", gpmi_io_clk),
- _REGISTER_CLOCK(NULL, "usboh3_clk", usboh3_clk),
- _REGISTER_CLOCK(NULL, "sata_clk", sata_clk),
- _REGISTER_CLOCK(NULL, "cko1_clk", cko1_clk),
-};
-
-int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
-{
- u32 val = readl_relaxed(CLPCR);
-
- val &= ~BM_CLPCR_LPM;
- switch (mode) {
- case WAIT_CLOCKED:
- break;
- case WAIT_UNCLOCKED:
- val |= 0x1 << BP_CLPCR_LPM;
- break;
- case STOP_POWER_ON:
- val |= 0x2 << BP_CLPCR_LPM;
- break;
- case WAIT_UNCLOCKED_POWER_OFF:
- val |= 0x1 << BP_CLPCR_LPM;
- val &= ~BM_CLPCR_VSTBY;
- val &= ~BM_CLPCR_SBYOS;
- break;
- case STOP_POWER_OFF:
- val |= 0x2 << BP_CLPCR_LPM;
- val |= 0x3 << BP_CLPCR_STBY_COUNT;
- val |= BM_CLPCR_VSTBY;
- val |= BM_CLPCR_SBYOS;
- break;
- default:
- return -EINVAL;
- }
- writel_relaxed(val, CLPCR);
-
- return 0;
-}
-
-static struct map_desc imx6q_clock_desc[] = {
- imx_map_entry(MX6Q, CCM, MT_DEVICE),
- imx_map_entry(MX6Q, ANATOP, MT_DEVICE),
-};
-
-void __init imx6q_clock_map_io(void)
-{
- iotable_init(imx6q_clock_desc, ARRAY_SIZE(imx6q_clock_desc));
-}
-
-int __init mx6q_clocks_init(void)
-{
- struct device_node *np;
- void __iomem *base;
- int i, irq;
-
- /* retrieve the freqency of fixed clocks from device tree */
- for_each_compatible_node(np, NULL, "fixed-clock") {
- u32 rate;
- if (of_property_read_u32(np, "clock-frequency", &rate))
- continue;
-
- if (of_device_is_compatible(np, "fsl,imx-ckil"))
- external_low_reference = rate;
- else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
- external_high_reference = rate;
- else if (of_device_is_compatible(np, "fsl,imx-osc"))
- oscillator_reference = rate;
- }
-
- for (i = 0; i < ARRAY_SIZE(lookups); i++)
- clkdev_add(&lookups[i]);
-
- /* only keep necessary clocks on */
- writel_relaxed(0x3 << CG0 | 0x3 << CG1 | 0x3 << CG2, CCGR0);
- writel_relaxed(0x3 << CG8 | 0x3 << CG9 | 0x3 << CG10, CCGR2);
- writel_relaxed(0x3 << CG10 | 0x3 << CG12, CCGR3);
- writel_relaxed(0x3 << CG4 | 0x3 << CG6 | 0x3 << CG7, CCGR4);
- writel_relaxed(0x3 << CG0, CCGR5);
- writel_relaxed(0, CCGR6);
- writel_relaxed(0, CCGR7);
-
- clk_enable(&uart_clk);
- clk_enable(&mmdc_ch0_axi_clk);
-
- clk_set_rate(&pll4_audio, FREQ_650M);
- clk_set_rate(&pll5_video, FREQ_650M);
- clk_set_parent(&ipu1_di0_clk, &ipu1_di0_pre_clk);
- clk_set_parent(&ipu1_di0_pre_clk, &pll5_video);
- clk_set_parent(&gpu3d_shader_clk, &pll2_pfd_594m);
- clk_set_rate(&gpu3d_shader_clk, FREQ_594M);
- clk_set_parent(&gpu3d_core_clk, &mmdc_ch0_axi_clk);
- clk_set_rate(&gpu3d_core_clk, FREQ_528M);
- clk_set_parent(&asrc_serial_clk, &pll3_usb_otg);
- clk_set_rate(&asrc_serial_clk, 1500000);
- clk_set_rate(&enfc_clk, 11000000);
-
- /*
- * Before pinctrl API is available, we have to rely on the pad
- * configuration set up by bootloader. For usdhc example here,
- * u-boot sets up the pads for 49.5 MHz case, and we have to lower
- * the usdhc clock from 198 to 49.5 MHz to match the pad configuration.
- *
- * FIXME: This is should be removed after pinctrl API is available.
- * At that time, usdhc driver can call pinctrl API to change pad
- * configuration dynamically per different usdhc clock settings.
- */
- clk_set_rate(&usdhc1_clk, 49500000);
- clk_set_rate(&usdhc2_clk, 49500000);
- clk_set_rate(&usdhc3_clk, 49500000);
- clk_set_rate(&usdhc4_clk, 49500000);
-
- clk_set_parent(&cko1_clk, &ahb_clk);
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
- base = of_iomap(np, 0);
- WARN_ON(!base);
- irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(&gpt_clk, base, irq);
-
- return 0;
-}
diff --git a/arch/arm/mach-imx/clock-mx51-mx53.c b/arch/arm/mach-imx/clock-mx51-mx53.c
deleted file mode 100644
index 08470504a088..000000000000
--- a/arch/arm/mach-imx/clock-mx51-mx53.c
+++ /dev/null
@@ -1,1675 +0,0 @@
-/*
- * Copyright 2008-2010 Freescale Semiconductor, Inc. All Rights Reserved.
- * Copyright (C) 2009-2010 Amit Kucheria <amit.kucheria@canonical.com>
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/clkdev.h>
-#include <linux/of.h>
-
-#include <asm/div64.h>
-
-#include <mach/hardware.h>
-#include <mach/common.h>
-#include <mach/clock.h>
-
-#include "crm-regs-imx5.h"
-
-/* External clock values passed-in by the board code */
-static unsigned long external_high_reference, external_low_reference;
-static unsigned long oscillator_reference, ckih2_reference;
-
-static struct clk osc_clk;
-static struct clk pll1_main_clk;
-static struct clk pll1_sw_clk;
-static struct clk pll2_sw_clk;
-static struct clk pll3_sw_clk;
-static struct clk mx53_pll4_sw_clk;
-static struct clk lp_apm_clk;
-static struct clk periph_apm_clk;
-static struct clk ahb_clk;
-static struct clk ipg_clk;
-static struct clk usboh3_clk;
-static struct clk emi_fast_clk;
-static struct clk ipu_clk;
-static struct clk mipi_hsc1_clk;
-static struct clk esdhc1_clk;
-static struct clk esdhc2_clk;
-static struct clk esdhc3_mx53_clk;
-
-#define MAX_DPLL_WAIT_TRIES 1000 /* 1000 * udelay(1) = 1ms */
-
-/* calculate best pre and post dividers to get the required divider */
-static void __calc_pre_post_dividers(u32 div, u32 *pre, u32 *post,
- u32 max_pre, u32 max_post)
-{
- if (div >= max_pre * max_post) {
- *pre = max_pre;
- *post = max_post;
- } else if (div >= max_pre) {
- u32 min_pre, temp_pre, old_err, err;
- min_pre = DIV_ROUND_UP(div, max_post);
- old_err = max_pre;
- for (temp_pre = max_pre; temp_pre >= min_pre; temp_pre--) {
- err = div % temp_pre;
- if (err == 0) {
- *pre = temp_pre;
- break;
- }
- err = temp_pre - err;
- if (err < old_err) {
- old_err = err;
- *pre = temp_pre;
- }
- }
- *post = DIV_ROUND_UP(div, *pre);
- } else {
- *pre = div;
- *post = 1;
- }
-}
-
-static void _clk_ccgr_setclk(struct clk *clk, unsigned mode)
-{
- u32 reg = __raw_readl(clk->enable_reg);
-
- reg &= ~(MXC_CCM_CCGRx_CG_MASK << clk->enable_shift);
- reg |= mode << clk->enable_shift;
-
- __raw_writel(reg, clk->enable_reg);
-}
-
-static int _clk_ccgr_enable(struct clk *clk)
-{
- _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_ON);
- return 0;
-}
-
-static void _clk_ccgr_disable(struct clk *clk)
-{
- _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_OFF);
-}
-
-static int _clk_ccgr_enable_inrun(struct clk *clk)
-{
- _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
- return 0;
-}
-
-static void _clk_ccgr_disable_inwait(struct clk *clk)
-{
- _clk_ccgr_setclk(clk, MXC_CCM_CCGRx_MOD_IDLE);
-}
-
-/*
- * For the 4-to-1 muxed input clock
- */
-static inline u32 _get_mux(struct clk *parent, struct clk *m0,
- struct clk *m1, struct clk *m2, struct clk *m3)
-{
- if (parent == m0)
- return 0;
- else if (parent == m1)
- return 1;
- else if (parent == m2)
- return 2;
- else if (parent == m3)
- return 3;
- else
- BUG();
-
- return -EINVAL;
-}
-
-static inline void __iomem *_mx51_get_pll_base(struct clk *pll)
-{
- if (pll == &pll1_main_clk)
- return MX51_DPLL1_BASE;
- else if (pll == &pll2_sw_clk)
- return MX51_DPLL2_BASE;
- else if (pll == &pll3_sw_clk)
- return MX51_DPLL3_BASE;
- else
- BUG();
-
- return NULL;
-}
-
-static inline void __iomem *_mx53_get_pll_base(struct clk *pll)
-{
- if (pll == &pll1_main_clk)
- return MX53_DPLL1_BASE;
- else if (pll == &pll2_sw_clk)
- return MX53_DPLL2_BASE;
- else if (pll == &pll3_sw_clk)
- return MX53_DPLL3_BASE;
- else if (pll == &mx53_pll4_sw_clk)
- return MX53_DPLL4_BASE;
- else
- BUG();
-
- return NULL;
-}
-
-static inline void __iomem *_get_pll_base(struct clk *pll)
-{
- if (cpu_is_mx51())
- return _mx51_get_pll_base(pll);
- else
- return _mx53_get_pll_base(pll);
-}
-
-static unsigned long clk_pll_get_rate(struct clk *clk)
-{
- long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
- unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
- void __iomem *pllbase;
- s64 temp;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- pllbase = _get_pll_base(clk);
-
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
- dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
-
- if (pll_hfsm == 0) {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
- } else {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
- }
- pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
- mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
- mfi = (mfi <= 5) ? 5 : mfi;
- mfd = dp_mfd & MXC_PLL_DP_MFD_MASK;
- mfn = mfn_abs = dp_mfn & MXC_PLL_DP_MFN_MASK;
- /* Sign extend to 32-bits */
- if (mfn >= 0x04000000) {
- mfn |= 0xFC000000;
- mfn_abs = -mfn;
- }
-
- ref_clk = 2 * parent_rate;
- if (dbl != 0)
- ref_clk *= 2;
-
- ref_clk /= (pdf + 1);
- temp = (u64) ref_clk * mfn_abs;
- do_div(temp, mfd + 1);
- if (mfn < 0)
- temp = -temp;
- temp = (ref_clk * mfi) + temp;
-
- return temp;
-}
-
-static int _clk_pll_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg;
- void __iomem *pllbase;
-
- long mfi, pdf, mfn, mfd = 999999;
- s64 temp64;
- unsigned long quad_parent_rate;
- unsigned long pll_hfsm, dp_ctl;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- pllbase = _get_pll_base(clk);
-
- quad_parent_rate = 4 * parent_rate;
- pdf = mfi = -1;
- while (++pdf < 16 && mfi < 5)
- mfi = rate * (pdf+1) / quad_parent_rate;
- if (mfi > 15)
- return -EINVAL;
- pdf--;
-
- temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
- do_div(temp64, quad_parent_rate/1000000);
- mfn = (long)temp64;
-
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- /* use dpdck0_2 */
- __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
- if (pll_hfsm == 0) {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
- } else {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
- }
-
- return 0;
-}
-
-static int _clk_pll_enable(struct clk *clk)
-{
- u32 reg;
- void __iomem *pllbase;
- int i = 0;
-
- pllbase = _get_pll_base(clk);
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- if (reg & MXC_PLL_DP_CTL_UPEN)
- return 0;
-
- reg |= MXC_PLL_DP_CTL_UPEN;
- __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-
- /* Wait for lock */
- do {
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- if (reg & MXC_PLL_DP_CTL_LRF)
- break;
-
- udelay(1);
- } while (++i < MAX_DPLL_WAIT_TRIES);
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- pr_err("MX5: pll locking failed\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static void _clk_pll_disable(struct clk *clk)
-{
- u32 reg;
- void __iomem *pllbase;
-
- pllbase = _get_pll_base(clk);
- reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) & ~MXC_PLL_DP_CTL_UPEN;
- __raw_writel(reg, pllbase + MXC_PLL_DP_CTL);
-}
-
-static int _clk_pll1_sw_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg, step;
-
- reg = __raw_readl(MXC_CCM_CCSR);
-
- /* When switching from pll_main_clk to a bypass clock, first select a
- * multiplexed clock in 'step_sel', then shift the glitchless mux
- * 'pll1_sw_clk_sel'.
- *
- * When switching back, do it in reverse order
- */
- if (parent == &pll1_main_clk) {
- /* Switch to pll1_main_clk */
- reg &= ~MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
- __raw_writel(reg, MXC_CCM_CCSR);
- /* step_clk mux switched to lp_apm, to save power. */
- reg = __raw_readl(MXC_CCM_CCSR);
- reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
- reg |= (MXC_CCM_CCSR_STEP_SEL_LP_APM <<
- MXC_CCM_CCSR_STEP_SEL_OFFSET);
- } else {
- if (parent == &lp_apm_clk) {
- step = MXC_CCM_CCSR_STEP_SEL_LP_APM;
- } else if (parent == &pll2_sw_clk) {
- step = MXC_CCM_CCSR_STEP_SEL_PLL2_DIVIDED;
- } else if (parent == &pll3_sw_clk) {
- step = MXC_CCM_CCSR_STEP_SEL_PLL3_DIVIDED;
- } else
- return -EINVAL;
-
- reg &= ~MXC_CCM_CCSR_STEP_SEL_MASK;
- reg |= (step << MXC_CCM_CCSR_STEP_SEL_OFFSET);
-
- __raw_writel(reg, MXC_CCM_CCSR);
- /* Switch to step_clk */
- reg = __raw_readl(MXC_CCM_CCSR);
- reg |= MXC_CCM_CCSR_PLL1_SW_CLK_SEL;
- }
- __raw_writel(reg, MXC_CCM_CCSR);
- return 0;
-}
-
-static unsigned long clk_pll1_sw_get_rate(struct clk *clk)
-{
- u32 reg, div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- reg = __raw_readl(MXC_CCM_CCSR);
-
- if (clk->parent == &pll2_sw_clk) {
- div = ((reg & MXC_CCM_CCSR_PLL2_PODF_MASK) >>
- MXC_CCM_CCSR_PLL2_PODF_OFFSET) + 1;
- } else if (clk->parent == &pll3_sw_clk) {
- div = ((reg & MXC_CCM_CCSR_PLL3_PODF_MASK) >>
- MXC_CCM_CCSR_PLL3_PODF_OFFSET) + 1;
- } else
- div = 1;
- return parent_rate / div;
-}
-
-static int _clk_pll2_sw_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CCSR);
-
- if (parent == &pll2_sw_clk)
- reg &= ~MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
- else
- reg |= MXC_CCM_CCSR_PLL2_SW_CLK_SEL;
-
- __raw_writel(reg, MXC_CCM_CCSR);
- return 0;
-}
-
-static int _clk_lp_apm_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- if (parent == &osc_clk)
- reg = __raw_readl(MXC_CCM_CCSR) & ~MXC_CCM_CCSR_LP_APM_SEL;
- else
- return -EINVAL;
-
- __raw_writel(reg, MXC_CCM_CCSR);
-
- return 0;
-}
-
-static unsigned long clk_cpu_get_rate(struct clk *clk)
-{
- u32 cacrr, div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
- cacrr = __raw_readl(MXC_CCM_CACRR);
- div = (cacrr & MXC_CCM_CACRR_ARM_PODF_MASK) + 1;
-
- return parent_rate / div;
-}
-
-static int clk_cpu_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, cpu_podf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
- cpu_podf = parent_rate / rate - 1;
- /* use post divider to change freq */
- reg = __raw_readl(MXC_CCM_CACRR);
- reg &= ~MXC_CCM_CACRR_ARM_PODF_MASK;
- reg |= cpu_podf << MXC_CCM_CACRR_ARM_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_CACRR);
-
- return 0;
-}
-
-static int _clk_periph_apm_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg, mux;
- int i = 0;
-
- mux = _get_mux(parent, &pll1_sw_clk, &pll3_sw_clk, &lp_apm_clk, NULL);
-
- reg = __raw_readl(MXC_CCM_CBCMR) & ~MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK;
- reg |= mux << MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET;
- __raw_writel(reg, MXC_CCM_CBCMR);
-
- /* Wait for lock */
- do {
- reg = __raw_readl(MXC_CCM_CDHIPR);
- if (!(reg & MXC_CCM_CDHIPR_PERIPH_CLK_SEL_BUSY))
- break;
-
- udelay(1);
- } while (++i < MAX_DPLL_WAIT_TRIES);
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- pr_err("MX5: Set parent for periph_apm clock failed\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int _clk_main_bus_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
-
- if (parent == &pll2_sw_clk)
- reg &= ~MXC_CCM_CBCDR_PERIPH_CLK_SEL;
- else if (parent == &periph_apm_clk)
- reg |= MXC_CCM_CBCDR_PERIPH_CLK_SEL;
- else
- return -EINVAL;
-
- __raw_writel(reg, MXC_CCM_CBCDR);
-
- return 0;
-}
-
-static struct clk main_bus_clk = {
- .parent = &pll2_sw_clk,
- .set_parent = _clk_main_bus_set_parent,
-};
-
-static unsigned long clk_ahb_get_rate(struct clk *clk)
-{
- u32 reg, div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >>
- MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1;
- return parent_rate / div;
-}
-
-
-static int _clk_ahb_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div;
- unsigned long parent_rate;
- int i = 0;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (div > 8 || div < 1 || ((parent_rate / div) != rate))
- return -EINVAL;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- reg &= ~MXC_CCM_CBCDR_AHB_PODF_MASK;
- reg |= (div - 1) << MXC_CCM_CBCDR_AHB_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_CBCDR);
-
- /* Wait for lock */
- do {
- reg = __raw_readl(MXC_CCM_CDHIPR);
- if (!(reg & MXC_CCM_CDHIPR_AHB_PODF_BUSY))
- break;
-
- udelay(1);
- } while (++i < MAX_DPLL_WAIT_TRIES);
-
- if (i == MAX_DPLL_WAIT_TRIES) {
- pr_err("MX5: clk_ahb_set_rate failed\n");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static unsigned long _clk_ahb_round_rate(struct clk *clk,
- unsigned long rate)
-{
- u32 div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- div = parent_rate / rate;
- if (div > 8)
- div = 8;
- else if (div == 0)
- div++;
- return parent_rate / div;
-}
-
-
-static int _clk_max_enable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_enable(clk);
-
- /* Handshake with MAX when LPM is entered. */
- reg = __raw_readl(MXC_CCM_CLPCR);
- if (cpu_is_mx51())
- reg &= ~MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
- else if (cpu_is_mx53())
- reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-
- return 0;
-}
-
-static void _clk_max_disable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_disable_inwait(clk);
-
- /* No Handshake with MAX when LPM is entered as its disabled. */
- reg = __raw_readl(MXC_CCM_CLPCR);
- if (cpu_is_mx51())
- reg |= MX51_CCM_CLPCR_BYPASS_MAX_LPM_HS;
- else if (cpu_is_mx53())
- reg &= ~MX53_CCM_CLPCR_BYPASS_MAX_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static unsigned long clk_ipg_get_rate(struct clk *clk)
-{
- u32 reg, div;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >>
- MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1;
-
- return parent_rate / div;
-}
-
-static unsigned long clk_ipg_per_get_rate(struct clk *clk)
-{
- u32 reg, prediv1, prediv2, podf;
- unsigned long parent_rate;
-
- parent_rate = clk_get_rate(clk->parent);
-
- if (clk->parent == &main_bus_clk || clk->parent == &lp_apm_clk) {
- /* the main_bus_clk is the one before the DVFS engine */
- reg = __raw_readl(MXC_CCM_CBCDR);
- prediv1 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >>
- MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET) + 1;
- prediv2 = ((reg & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >>
- MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET) + 1;
- podf = ((reg & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >>
- MXC_CCM_CBCDR_PERCLK_PODF_OFFSET) + 1;
- return parent_rate / (prediv1 * prediv2 * podf);
- } else if (clk->parent == &ipg_clk)
- return parent_rate;
- else
- BUG();
-}
-
-static int _clk_ipg_per_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CBCMR);
-
- reg &= ~MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
- reg &= ~MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
-
- if (parent == &ipg_clk)
- reg |= MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL;
- else if (parent == &lp_apm_clk)
- reg |= MXC_CCM_CBCMR_PERCLK_LP_APM_CLK_SEL;
- else if (parent != &main_bus_clk)
- return -EINVAL;
-
- __raw_writel(reg, MXC_CCM_CBCMR);
-
- return 0;
-}
-
-#define clk_nfc_set_parent NULL
-
-static unsigned long clk_nfc_get_rate(struct clk *clk)
-{
- unsigned long rate;
- u32 reg, div;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_NFC_PODF_MASK) >>
- MXC_CCM_CBCDR_NFC_PODF_OFFSET) + 1;
- rate = clk_get_rate(clk->parent) / div;
- WARN_ON(rate == 0);
- return rate;
-}
-
-static unsigned long clk_nfc_round_rate(struct clk *clk,
- unsigned long rate)
-{
- u32 div;
- unsigned long parent_rate = clk_get_rate(clk->parent);
-
- if (!rate)
- return -EINVAL;
-
- div = parent_rate / rate;
-
- if (parent_rate % rate)
- div++;
-
- if (div > 8)
- return -EINVAL;
-
- return parent_rate / div;
-
-}
-
-static int clk_nfc_set_rate(struct clk *clk, unsigned long rate)
-{
- u32 reg, div;
-
- div = clk_get_rate(clk->parent) / rate;
- if (div == 0)
- div++;
- if (((clk_get_rate(clk->parent) / div) != rate) || (div > 8))
- return -EINVAL;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- reg &= ~MXC_CCM_CBCDR_NFC_PODF_MASK;
- reg |= (div - 1) << MXC_CCM_CBCDR_NFC_PODF_OFFSET;
- __raw_writel(reg, MXC_CCM_CBCDR);
-
- while (__raw_readl(MXC_CCM_CDHIPR) &
- MXC_CCM_CDHIPR_NFC_IPG_INT_MEM_PODF_BUSY){
- }
-
- return 0;
-}
-
-static unsigned long get_high_reference_clock_rate(struct clk *clk)
-{
- return external_high_reference;
-}
-
-static unsigned long get_low_reference_clock_rate(struct clk *clk)
-{
- return external_low_reference;
-}
-
-static unsigned long get_oscillator_reference_clock_rate(struct clk *clk)
-{
- return oscillator_reference;
-}
-
-static unsigned long get_ckih2_reference_clock_rate(struct clk *clk)
-{
- return ckih2_reference;
-}
-
-static unsigned long clk_emi_slow_get_rate(struct clk *clk)
-{
- u32 reg, div;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_EMI_PODF_MASK) >>
- MXC_CCM_CBCDR_EMI_PODF_OFFSET) + 1;
-
- return clk_get_rate(clk->parent) / div;
-}
-
-static unsigned long _clk_ddr_hf_get_rate(struct clk *clk)
-{
- unsigned long rate;
- u32 reg, div;
-
- reg = __raw_readl(MXC_CCM_CBCDR);
- div = ((reg & MXC_CCM_CBCDR_DDR_PODF_MASK) >>
- MXC_CCM_CBCDR_DDR_PODF_OFFSET) + 1;
- rate = clk_get_rate(clk->parent) / div;
-
- return rate;
-}
-
-/* External high frequency clock */
-static struct clk ckih_clk = {
- .get_rate = get_high_reference_clock_rate,
-};
-
-static struct clk ckih2_clk = {
- .get_rate = get_ckih2_reference_clock_rate,
-};
-
-static struct clk osc_clk = {
- .get_rate = get_oscillator_reference_clock_rate,
-};
-
-/* External low frequency (32kHz) clock */
-static struct clk ckil_clk = {
- .get_rate = get_low_reference_clock_rate,
-};
-
-static struct clk pll1_main_clk = {
- .parent = &osc_clk,
- .get_rate = clk_pll_get_rate,
- .enable = _clk_pll_enable,
- .disable = _clk_pll_disable,
-};
-
-/* Clock tree block diagram (WIP):
- * CCM: Clock Controller Module
- *
- * PLL output -> |
- * | CCM Switcher -> CCM_CLK_ROOT_GEN ->
- * PLL bypass -> |
- *
- */
-
-/* PLL1 SW supplies to ARM core */
-static struct clk pll1_sw_clk = {
- .parent = &pll1_main_clk,
- .set_parent = _clk_pll1_sw_set_parent,
- .get_rate = clk_pll1_sw_get_rate,
-};
-
-/* PLL2 SW supplies to AXI/AHB/IP buses */
-static struct clk pll2_sw_clk = {
- .parent = &osc_clk,
- .get_rate = clk_pll_get_rate,
- .set_rate = _clk_pll_set_rate,
- .set_parent = _clk_pll2_sw_set_parent,
- .enable = _clk_pll_enable,
- .disable = _clk_pll_disable,
-};
-
-/* PLL3 SW supplies to serial clocks like USB, SSI, etc. */
-static struct clk pll3_sw_clk = {
- .parent = &osc_clk,
- .set_rate = _clk_pll_set_rate,
- .get_rate = clk_pll_get_rate,
- .enable = _clk_pll_enable,
- .disable = _clk_pll_disable,
-};
-
-/* PLL4 SW supplies to LVDS Display Bridge(LDB) */
-static struct clk mx53_pll4_sw_clk = {
- .parent = &osc_clk,
- .set_rate = _clk_pll_set_rate,
- .enable = _clk_pll_enable,
- .disable = _clk_pll_disable,
-};
-
-/* Low-power Audio Playback Mode clock */
-static struct clk lp_apm_clk = {
- .parent = &osc_clk,
- .set_parent = _clk_lp_apm_set_parent,
-};
-
-static struct clk periph_apm_clk = {
- .parent = &pll1_sw_clk,
- .set_parent = _clk_periph_apm_set_parent,
-};
-
-static struct clk cpu_clk = {
- .parent = &pll1_sw_clk,
- .get_rate = clk_cpu_get_rate,
- .set_rate = clk_cpu_set_rate,
-};
-
-static struct clk ahb_clk = {
- .parent = &main_bus_clk,
- .get_rate = clk_ahb_get_rate,
- .set_rate = _clk_ahb_set_rate,
- .round_rate = _clk_ahb_round_rate,
-};
-
-static struct clk iim_clk = {
- .parent = &ipg_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG15_OFFSET,
-};
-
-/* Main IP interface clock for access to registers */
-static struct clk ipg_clk = {
- .parent = &ahb_clk,
- .get_rate = clk_ipg_get_rate,
-};
-
-static struct clk ipg_perclk = {
- .parent = &lp_apm_clk,
- .get_rate = clk_ipg_per_get_rate,
- .set_parent = _clk_ipg_per_set_parent,
-};
-
-static struct clk ahb_max_clk = {
- .parent = &ahb_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
-};
-
-static struct clk aips_tz1_clk = {
- .parent = &ahb_clk,
- .secondary = &ahb_max_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk aips_tz2_clk = {
- .parent = &ahb_clk,
- .secondary = &ahb_max_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk gpc_dvfs_clk = {
- .enable_reg = MXC_CCM_CCGR5,
- .enable_shift = MXC_CCM_CCGRx_CG12_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable,
-};
-
-static struct clk gpt_32k_clk = {
- .id = 0,
- .parent = &ckil_clk,
-};
-
-static struct clk dummy_clk = {
- .id = 0,
-};
-
-static struct clk emi_slow_clk = {
- .parent = &pll2_sw_clk,
- .enable_reg = MXC_CCM_CCGR5,
- .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable_inwait,
- .get_rate = clk_emi_slow_get_rate,
-};
-
-static int clk_ipu_enable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_enable(clk);
-
- /* Enable handshake with IPU when certain clock rates are changed */
- reg = __raw_readl(MXC_CCM_CCDR);
- reg &= ~MXC_CCM_CCDR_IPU_HS_MASK;
- __raw_writel(reg, MXC_CCM_CCDR);
-
- /* Enable handshake with IPU when LPM is entered */
- reg = __raw_readl(MXC_CCM_CLPCR);
- reg &= ~MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-
- return 0;
-}
-
-static void clk_ipu_disable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_disable(clk);
-
- /* Disable handshake with IPU whe dividers are changed */
- reg = __raw_readl(MXC_CCM_CCDR);
- reg |= MXC_CCM_CCDR_IPU_HS_MASK;
- __raw_writel(reg, MXC_CCM_CCDR);
-
- /* Disable handshake with IPU when LPM is entered */
- reg = __raw_readl(MXC_CCM_CLPCR);
- reg |= MXC_CCM_CLPCR_BYPASS_IPU_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static struct clk ahbmux1_clk = {
- .parent = &ahb_clk,
- .secondary = &ahb_max_clk,
- .enable_reg = MXC_CCM_CCGR0,
- .enable_shift = MXC_CCM_CCGRx_CG8_OFFSET,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable_inwait,
-};
-
-static struct clk ipu_sec_clk = {
- .parent = &emi_fast_clk,
- .secondary = &ahbmux1_clk,
-};
-
-static struct clk ddr_hf_clk = {
- .parent = &pll1_sw_clk,
- .get_rate = _clk_ddr_hf_get_rate,
-};
-
-static struct clk ddr_clk = {
- .parent = &ddr_hf_clk,
-};
-
-/* clock definitions for MIPI HSC unit which has been removed
- * from documentation, but not from hardware
- */
-static int _clk_hsc_enable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_enable(clk);
- /* Handshake with IPU when certain clock rates are changed. */
- reg = __raw_readl(MXC_CCM_CCDR);
- reg &= ~MXC_CCM_CCDR_HSC_HS_MASK;
- __raw_writel(reg, MXC_CCM_CCDR);
-
- reg = __raw_readl(MXC_CCM_CLPCR);
- reg &= ~MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-
- return 0;
-}
-
-static void _clk_hsc_disable(struct clk *clk)
-{
- u32 reg;
-
- _clk_ccgr_disable(clk);
- /* No handshake with HSC as its not enabled. */
- reg = __raw_readl(MXC_CCM_CCDR);
- reg |= MXC_CCM_CCDR_HSC_HS_MASK;
- __raw_writel(reg, MXC_CCM_CCDR);
-
- reg = __raw_readl(MXC_CCM_CLPCR);
- reg |= MXC_CCM_CLPCR_BYPASS_HSC_LPM_HS;
- __raw_writel(reg, MXC_CCM_CLPCR);
-}
-
-static struct clk mipi_hsp_clk = {
- .parent = &ipu_clk,
- .enable_reg = MXC_CCM_CCGR4,
- .enable_shift = MXC_CCM_CCGRx_CG6_OFFSET,
- .enable = _clk_hsc_enable,
- .disable = _clk_hsc_disable,
- .secondary = &mipi_hsc1_clk,
-};
-
-#define DEFINE_CLOCK_CCGR(name, i, er, es, pfx, p, s) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = pfx##_get_rate, \
- .set_rate = pfx##_set_rate, \
- .round_rate = pfx##_round_rate, \
- .set_parent = pfx##_set_parent, \
- .enable = _clk_ccgr_enable, \
- .disable = _clk_ccgr_disable, \
- .parent = p, \
- .secondary = s, \
- }
-
-#define DEFINE_CLOCK_MAX(name, i, er, es, pfx, p, s) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = pfx##_get_rate, \
- .set_rate = pfx##_set_rate, \
- .set_parent = pfx##_set_parent, \
- .enable = _clk_max_enable, \
- .disable = _clk_max_disable, \
- .parent = p, \
- .secondary = s, \
- }
-
-#define CLK_GET_RATE(name, nr, bitsname) \
-static unsigned long clk_##name##_get_rate(struct clk *clk) \
-{ \
- u32 reg, pred, podf; \
- \
- reg = __raw_readl(MXC_CCM_CSCDR##nr); \
- pred = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK) \
- >> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET; \
- podf = (reg & MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK) \
- >> MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET; \
- \
- return DIV_ROUND_CLOSEST(clk_get_rate(clk->parent), \
- (pred + 1) * (podf + 1)); \
-}
-
-#define CLK_SET_PARENT(name, nr, bitsname) \
-static int clk_##name##_set_parent(struct clk *clk, struct clk *parent) \
-{ \
- u32 reg, mux; \
- \
- mux = _get_mux(parent, &pll1_sw_clk, &pll2_sw_clk, \
- &pll3_sw_clk, &lp_apm_clk); \
- reg = __raw_readl(MXC_CCM_CSCMR##nr) & \
- ~MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_MASK; \
- reg |= mux << MXC_CCM_CSCMR##nr##_##bitsname##_CLK_SEL_OFFSET; \
- __raw_writel(reg, MXC_CCM_CSCMR##nr); \
- \
- return 0; \
-}
-
-#define CLK_SET_RATE(name, nr, bitsname) \
-static int clk_##name##_set_rate(struct clk *clk, unsigned long rate) \
-{ \
- u32 reg, div, parent_rate; \
- u32 pre = 0, post = 0; \
- \
- parent_rate = clk_get_rate(clk->parent); \
- div = parent_rate / rate; \
- \
- if ((parent_rate / div) != rate) \
- return -EINVAL; \
- \
- __calc_pre_post_dividers(div, &pre, &post, \
- (MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK >> \
- MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET) + 1, \
- (MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK >> \
- MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET) + 1);\
- \
- /* Set sdhc1 clock divider */ \
- reg = __raw_readl(MXC_CCM_CSCDR##nr) & \
- ~(MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_MASK \
- | MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_MASK); \
- reg |= (post - 1) << \
- MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PODF_OFFSET; \
- reg |= (pre - 1) << \
- MXC_CCM_CSCDR##nr##_##bitsname##_CLK_PRED_OFFSET; \
- __raw_writel(reg, MXC_CCM_CSCDR##nr); \
- \
- return 0; \
-}
-
-/* UART */
-CLK_GET_RATE(uart, 1, UART)
-CLK_SET_PARENT(uart, 1, UART)
-
-static struct clk uart_root_clk = {
- .parent = &pll2_sw_clk,
- .get_rate = clk_uart_get_rate,
- .set_parent = clk_uart_set_parent,
-};
-
-/* USBOH3 */
-CLK_GET_RATE(usboh3, 1, USBOH3)
-CLK_SET_PARENT(usboh3, 1, USBOH3)
-
-static struct clk usboh3_clk = {
- .parent = &pll2_sw_clk,
- .get_rate = clk_usboh3_get_rate,
- .set_parent = clk_usboh3_set_parent,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable,
- .enable_reg = MXC_CCM_CCGR2,
- .enable_shift = MXC_CCM_CCGRx_CG14_OFFSET,
-};
-
-static struct clk usb_ahb_clk = {
- .parent = &ipg_clk,
- .enable = _clk_ccgr_enable,
- .disable = _clk_ccgr_disable,
- .enable_reg = MXC_CCM_CCGR2,
- .enable_shift = MXC_CCM_CCGRx_CG13_OFFSET,
-};
-
-static int clk_usb_phy1_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1) & ~MXC_CCM_CSCMR1_USB_PHY_CLK_SEL;
-
- if (parent == &pll3_sw_clk)
- reg |= 1 << MXC_CCM_CSCMR1_USB_PHY_CLK_SEL_OFFSET;
-
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-static struct clk usb_phy1_clk = {
- .parent = &pll3_sw_clk,
- .set_parent = clk_usb_phy1_set_parent,
- .enable = _clk_ccgr_enable,
- .enable_reg = MXC_CCM_CCGR2,
- .enable_shift = MXC_CCM_CCGRx_CG0_OFFSET,
- .disable = _clk_ccgr_disable,
-};
-
-/* eCSPI */
-CLK_GET_RATE(ecspi, 2, CSPI)
-CLK_SET_PARENT(ecspi, 1, CSPI)
-
-static struct clk ecspi_main_clk = {
- .parent = &pll3_sw_clk,
- .get_rate = clk_ecspi_get_rate,
- .set_parent = clk_ecspi_set_parent,
-};
-
-/* eSDHC */
-CLK_GET_RATE(esdhc1, 1, ESDHC1_MSHC1)
-CLK_SET_PARENT(esdhc1, 1, ESDHC1_MSHC1)
-CLK_SET_RATE(esdhc1, 1, ESDHC1_MSHC1)
-
-/* mx51 specific */
-CLK_GET_RATE(esdhc2, 1, ESDHC2_MSHC2)
-CLK_SET_PARENT(esdhc2, 1, ESDHC2_MSHC2)
-CLK_SET_RATE(esdhc2, 1, ESDHC2_MSHC2)
-
-static int clk_esdhc3_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1);
- if (parent == &esdhc1_clk)
- reg &= ~MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
- else if (parent == &esdhc2_clk)
- reg |= MXC_CCM_CSCMR1_ESDHC3_CLK_SEL;
- else
- return -EINVAL;
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-static int clk_esdhc4_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1);
- if (parent == &esdhc1_clk)
- reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
- else if (parent == &esdhc2_clk)
- reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
- else
- return -EINVAL;
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-/* mx53 specific */
-static int clk_esdhc2_mx53_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1);
- if (parent == &esdhc1_clk)
- reg &= ~MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
- else if (parent == &esdhc3_mx53_clk)
- reg |= MXC_CCM_CSCMR1_ESDHC2_MSHC2_MX53_CLK_SEL;
- else
- return -EINVAL;
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-CLK_GET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
-CLK_SET_PARENT(esdhc3_mx53, 1, ESDHC3_MX53)
-CLK_SET_RATE(esdhc3_mx53, 1, ESDHC3_MX53)
-
-static int clk_esdhc4_mx53_set_parent(struct clk *clk, struct clk *parent)
-{
- u32 reg;
-
- reg = __raw_readl(MXC_CCM_CSCMR1);
- if (parent == &esdhc1_clk)
- reg &= ~MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
- else if (parent == &esdhc3_mx53_clk)
- reg |= MXC_CCM_CSCMR1_ESDHC4_CLK_SEL;
- else
- return -EINVAL;
- __raw_writel(reg, MXC_CCM_CSCMR1);
-
- return 0;
-}
-
-#define DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, e, d, p, s) \
- static struct clk name = { \
- .id = i, \
- .enable_reg = er, \
- .enable_shift = es, \
- .get_rate = gr, \
- .set_rate = sr, \
- .enable = e, \
- .disable = d, \
- .parent = p, \
- .secondary = s, \
- }
-
-#define DEFINE_CLOCK(name, i, er, es, gr, sr, p, s) \
- DEFINE_CLOCK_FULL(name, i, er, es, gr, sr, _clk_ccgr_enable, _clk_ccgr_disable, p, s)
-
-/* Shared peripheral bus arbiter */
-DEFINE_CLOCK(spba_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG0_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-
-/* UART */
-DEFINE_CLOCK(uart1_ipg_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG3_OFFSET,
- NULL, NULL, &ipg_clk, &aips_tz1_clk);
-DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET,
- NULL, NULL, &ipg_clk, &aips_tz1_clk);
-DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET,
- NULL, NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart4_ipg_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG4_OFFSET,
- NULL, NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart5_ipg_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &ipg_clk, &spba_clk);
-DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET,
- NULL, NULL, &uart_root_clk, &uart1_ipg_clk);
-DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &uart_root_clk, &uart2_ipg_clk);
-DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &uart_root_clk, &uart3_ipg_clk);
-DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG5_OFFSET,
- NULL, NULL, &uart_root_clk, &uart4_ipg_clk);
-DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG7_OFFSET,
- NULL, NULL, &uart_root_clk, &uart5_ipg_clk);
-
-/* GPT */
-DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_clk, &gpt_ipg_clk);
-
-DEFINE_CLOCK(pwm1_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-
-/* I2C */
-DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET,
- NULL, NULL, &ipg_perclk, NULL);
-
-/* FEC */
-DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-
-/* NFC */
-DEFINE_CLOCK_CCGR(nfc_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG10_OFFSET,
- clk_nfc, &emi_slow_clk, NULL);
-
-/* SSI */
-DEFINE_CLOCK(ssi1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG8_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &pll3_sw_clk, &ssi1_ipg_clk);
-DEFINE_CLOCK(ssi2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG11_OFFSET,
- NULL, NULL, &pll3_sw_clk, &ssi2_ipg_clk);
-DEFINE_CLOCK(ssi3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG12_OFFSET,
- NULL, NULL, &ipg_clk, NULL);
-DEFINE_CLOCK(ssi3_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG13_OFFSET,
- NULL, NULL, &pll3_sw_clk, &ssi3_ipg_clk);
-
-/* eCSPI */
-DEFINE_CLOCK_FULL(ecspi1_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
- &ipg_clk, &spba_clk);
-DEFINE_CLOCK(ecspi1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG10_OFFSET,
- NULL, NULL, &ecspi_main_clk, &ecspi1_ipg_clk);
-DEFINE_CLOCK_FULL(ecspi2_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG11_OFFSET,
- NULL, NULL, _clk_ccgr_enable_inrun, _clk_ccgr_disable,
- &ipg_clk, &aips_tz2_clk);
-DEFINE_CLOCK(ecspi2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG12_OFFSET,
- NULL, NULL, &ecspi_main_clk, &ecspi2_ipg_clk);
-
-/* CSPI */
-DEFINE_CLOCK(cspi_ipg_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG9_OFFSET,
- NULL, NULL, &ipg_clk, &aips_tz2_clk);
-DEFINE_CLOCK(cspi_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG13_OFFSET,
- NULL, NULL, &ipg_clk, &cspi_ipg_clk);
-
-/* SDMA */
-DEFINE_CLOCK(sdma_clk, 1, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG15_OFFSET,
- NULL, NULL, &ahb_clk, NULL);
-
-/* eSDHC */
-DEFINE_CLOCK_FULL(esdhc1_ipg_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG0_OFFSET,
- NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_MAX(esdhc1_clk, 0, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG1_OFFSET,
- clk_esdhc1, &pll2_sw_clk, &esdhc1_ipg_clk);
-DEFINE_CLOCK_FULL(esdhc2_ipg_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG2_OFFSET,
- NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_FULL(esdhc3_ipg_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG4_OFFSET,
- NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-DEFINE_CLOCK_FULL(esdhc4_ipg_clk, 3, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, _clk_max_enable, _clk_max_disable, &ipg_clk, NULL);
-
-/* mx51 specific */
-DEFINE_CLOCK_MAX(esdhc2_clk, 1, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG3_OFFSET,
- clk_esdhc2, &pll2_sw_clk, &esdhc2_ipg_clk);
-
-static struct clk esdhc3_clk = {
- .id = 2,
- .parent = &esdhc1_clk,
- .set_parent = clk_esdhc3_set_parent,
- .enable_reg = MXC_CCM_CCGR3,
- .enable_shift = MXC_CCM_CCGRx_CG5_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
- .secondary = &esdhc3_ipg_clk,
-};
-static struct clk esdhc4_clk = {
- .id = 3,
- .parent = &esdhc1_clk,
- .set_parent = clk_esdhc4_set_parent,
- .enable_reg = MXC_CCM_CCGR3,
- .enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
- .secondary = &esdhc4_ipg_clk,
-};
-
-/* mx53 specific */
-static struct clk esdhc2_mx53_clk = {
- .id = 2,
- .parent = &esdhc1_clk,
- .set_parent = clk_esdhc2_mx53_set_parent,
- .enable_reg = MXC_CCM_CCGR3,
- .enable_shift = MXC_CCM_CCGRx_CG3_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
- .secondary = &esdhc3_ipg_clk,
-};
-
-DEFINE_CLOCK_MAX(esdhc3_mx53_clk, 2, MXC_CCM_CCGR3, MXC_CCM_CCGRx_CG5_OFFSET,
- clk_esdhc3_mx53, &pll2_sw_clk, &esdhc2_ipg_clk);
-
-static struct clk esdhc4_mx53_clk = {
- .id = 3,
- .parent = &esdhc1_clk,
- .set_parent = clk_esdhc4_mx53_set_parent,
- .enable_reg = MXC_CCM_CCGR3,
- .enable_shift = MXC_CCM_CCGRx_CG7_OFFSET,
- .enable = _clk_max_enable,
- .disable = _clk_max_disable,
- .secondary = &esdhc4_ipg_clk,
-};
-
-static struct clk sata_clk = {
- .parent = &ipg_clk,
- .enable = _clk_max_enable,
- .enable_reg = MXC_CCM_CCGR4,
- .enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
- .disable = _clk_max_disable,
-};
-
-static struct clk ahci_phy_clk = {
- .parent = &usb_phy1_clk,
-};
-
-static struct clk ahci_dma_clk = {
- .parent = &ahb_clk,
-};
-
-DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
-DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
-DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
-
-/* IPU */
-DEFINE_CLOCK_FULL(ipu_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG5_OFFSET,
- NULL, NULL, clk_ipu_enable, clk_ipu_disable, &ahb_clk, &ipu_sec_clk);
-
-DEFINE_CLOCK_FULL(emi_fast_clk, 0, MXC_CCM_CCGR5, MXC_CCM_CCGRx_CG7_OFFSET,
- NULL, NULL, _clk_ccgr_enable, _clk_ccgr_disable_inwait,
- &ddr_clk, NULL);
-
-DEFINE_CLOCK(ipu_di0_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG5_OFFSET,
- NULL, NULL, &pll3_sw_clk, NULL);
-DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET,
- NULL, NULL, &pll3_sw_clk, NULL);
-
-/* PATA */
-DEFINE_CLOCK(pata_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG0_OFFSET,
- NULL, NULL, &ipg_clk, &spba_clk);
-
-#define _REGISTER_CLOCK(d, n, c) \
- { \
- .dev_id = d, \
- .con_id = n, \
- .clk = &c, \
- },
-
-static struct clk_lookup mx51_lookups[] = {
- /* i.mx51 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- /* i.mx51 has the i.mx27 type fec */
- _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk)
- _REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, hsi2c_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb", usboh3_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_ahb", usb_ahb_clk)
- _REGISTER_CLOCK("mxc-ehci.0", "usb_phy1", usb_phy1_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb", usboh3_clk)
- _REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_ahb_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb", usboh3_clk)
- _REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_ahb_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb", usboh3_clk)
- _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", ahb_clk)
- _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
- _REGISTER_CLOCK("mxc_nand", NULL, nfc_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
- /* i.mx51 has the i.mx35 type sdma */
- _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
- _REGISTER_CLOCK(NULL, "ckih", ckih_clk)
- _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk)
- _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk)
- _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
- _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
- /* i.mx51 has the i.mx35 type cspi */
- _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx51.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx51.1", NULL, esdhc2_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx51.2", NULL, esdhc3_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx51.3", NULL, esdhc4_clk)
- _REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk)
- _REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
- _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
- _REGISTER_CLOCK(NULL, "mipi_hsp", mipi_hsp_clk)
- _REGISTER_CLOCK("imx-ipuv3", NULL, ipu_clk)
- _REGISTER_CLOCK("imx-ipuv3", "di0", ipu_di0_clk)
- _REGISTER_CLOCK("imx-ipuv3", "di1", ipu_di1_clk)
- _REGISTER_CLOCK(NULL, "gpc_dvfs", gpc_dvfs_clk)
- _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
-};
-
-static struct clk_lookup mx53_lookups[] = {
- /* i.mx53 has the i.mx21 type uart */
- _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk)
- _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk)
- _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk)
- _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk)
- _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk)
- _REGISTER_CLOCK(NULL, "gpt", gpt_clk)
- /* i.mx53 has the i.mx25 type fec */
- _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk)
- _REGISTER_CLOCK(NULL, "iim_clk", iim_clk)
- _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
- _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
- _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk)
- /* i.mx53 has the i.mx51 type ecspi */
- _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk)
- _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk)
- /* i.mx53 has the i.mx25 type cspi */
- _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx53.0", NULL, esdhc1_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx53.1", NULL, esdhc2_mx53_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx53.2", NULL, esdhc3_mx53_clk)
- _REGISTER_CLOCK("sdhci-esdhc-imx53.3", NULL, esdhc4_mx53_clk)
- _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk)
- _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk)
- /* i.mx53 has the i.mx35 type sdma */
- _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk)
- _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
- _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
- _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
- _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
- _REGISTER_CLOCK("pata_imx", NULL, pata_clk)
- _REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
- _REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
- _REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
-};
-
-static void clk_tree_init(void)
-{
- u32 reg;
-
- ipg_perclk.set_parent(&ipg_perclk, &lp_apm_clk);
-
- /*
- * Initialise the IPG PER CLK dividers to 3. IPG_PER_CLK should be at
- * 8MHz, its derived from lp_apm.
- *
- * FIXME: Verify if true for all boards
- */
- reg = __raw_readl(MXC_CCM_CBCDR);
- reg &= ~MXC_CCM_CBCDR_PERCLK_PRED1_MASK;
- reg &= ~MXC_CCM_CBCDR_PERCLK_PRED2_MASK;
- reg &= ~MXC_CCM_CBCDR_PERCLK_PODF_MASK;
- reg |= (2 << MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET);
- __raw_writel(reg, MXC_CCM_CBCDR);
-}
-
-int __init mx51_clocks_init(unsigned long ckil, unsigned long osc,
- unsigned long ckih1, unsigned long ckih2)
-{
- int i;
-
- external_low_reference = ckil;
- external_high_reference = ckih1;
- ckih2_reference = ckih2;
- oscillator_reference = osc;
-
- for (i = 0; i < ARRAY_SIZE(mx51_lookups); i++)
- clkdev_add(&mx51_lookups[i]);
-
- clk_tree_init();
-
- clk_enable(&cpu_clk);
- clk_enable(&main_bus_clk);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX51", mx51_revision());
- clk_disable(&iim_clk);
-
- /* move usb_phy_clk to 24MHz */
- clk_set_parent(&usb_phy1_clk, &osc_clk);
-
- /* set the usboh3_clk parent to pll2_sw_clk */
- clk_set_parent(&usboh3_clk, &pll2_sw_clk);
-
- /* Set SDHC parents to be PLL2 */
- clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
- clk_set_parent(&esdhc2_clk, &pll2_sw_clk);
-
- /* set SDHC root clock as 166.25MHZ*/
- clk_set_rate(&esdhc1_clk, 166250000);
- clk_set_rate(&esdhc2_clk, 166250000);
-
- /* System timer */
- mxc_timer_init(&gpt_clk, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
- MX51_INT_GPT);
- return 0;
-}
-
-int __init mx53_clocks_init(unsigned long ckil, unsigned long osc,
- unsigned long ckih1, unsigned long ckih2)
-{
- int i;
-
- external_low_reference = ckil;
- external_high_reference = ckih1;
- ckih2_reference = ckih2;
- oscillator_reference = osc;
-
- for (i = 0; i < ARRAY_SIZE(mx53_lookups); i++)
- clkdev_add(&mx53_lookups[i]);
-
- clk_tree_init();
-
- clk_set_parent(&uart_root_clk, &pll3_sw_clk);
- clk_enable(&cpu_clk);
- clk_enable(&main_bus_clk);
-
- clk_enable(&iim_clk);
- imx_print_silicon_rev("i.MX53", mx53_revision());
- clk_disable(&iim_clk);
-
- /* Set SDHC parents to be PLL2 */
- clk_set_parent(&esdhc1_clk, &pll2_sw_clk);
- clk_set_parent(&esdhc3_mx53_clk, &pll2_sw_clk);
-
- /* set SDHC root clock as 200MHZ*/
- clk_set_rate(&esdhc1_clk, 200000000);
- clk_set_rate(&esdhc3_mx53_clk, 200000000);
-
- /* System timer */
- mxc_timer_init(&gpt_clk, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
- MX53_INT_GPT);
- return 0;
-}
-
-#ifdef CONFIG_OF
-static void __init clk_get_freq_dt(unsigned long *ckil, unsigned long *osc,
- unsigned long *ckih1, unsigned long *ckih2)
-{
- struct device_node *np;
-
- /* retrieve the freqency of fixed clocks from device tree */
- for_each_compatible_node(np, NULL, "fixed-clock") {
- u32 rate;
- if (of_property_read_u32(np, "clock-frequency", &rate))
- continue;
-
- if (of_device_is_compatible(np, "fsl,imx-ckil"))
- *ckil = rate;
- else if (of_device_is_compatible(np, "fsl,imx-osc"))
- *osc = rate;
- else if (of_device_is_compatible(np, "fsl,imx-ckih1"))
- *ckih1 = rate;
- else if (of_device_is_compatible(np, "fsl,imx-ckih2"))
- *ckih2 = rate;
- }
-}
-
-int __init mx51_clocks_init_dt(void)
-{
- unsigned long ckil, osc, ckih1, ckih2;
-
- clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
- return mx51_clocks_init(ckil, osc, ckih1, ckih2);
-}
-
-int __init mx53_clocks_init_dt(void)
-{
- unsigned long ckil, osc, ckih1, ckih2;
-
- clk_get_freq_dt(&ckil, &osc, &ckih1, &ckih2);
- return mx53_clocks_init(ckil, osc, ckih1, ckih2);
-}
-#endif
diff --git a/arch/arm/mach-imx/crmregs-imx3.h b/arch/arm/mach-imx/crmregs-imx3.h
index 53141273df45..a1dfde53e335 100644
--- a/arch/arm/mach-imx/crmregs-imx3.h
+++ b/arch/arm/mach-imx/crmregs-imx3.h
@@ -24,48 +24,47 @@
#define CKIH_CLK_FREQ_27MHZ 27000000
#define CKIL_CLK_FREQ 32768
-#define MXC_CCM_BASE (cpu_is_mx31() ? \
-MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR) : MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR))
+extern void __iomem *mx3_ccm_base;
/* Register addresses */
-#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00)
-#define MXC_CCM_PDR0 (MXC_CCM_BASE + 0x04)
-#define MXC_CCM_PDR1 (MXC_CCM_BASE + 0x08)
-#define MX35_CCM_PDR2 (MXC_CCM_BASE + 0x0C)
-#define MXC_CCM_RCSR (MXC_CCM_BASE + 0x0C)
-#define MX35_CCM_PDR3 (MXC_CCM_BASE + 0x10)
-#define MXC_CCM_MPCTL (MXC_CCM_BASE + 0x10)
-#define MX35_CCM_PDR4 (MXC_CCM_BASE + 0x14)
-#define MXC_CCM_UPCTL (MXC_CCM_BASE + 0x14)
-#define MX35_CCM_RCSR (MXC_CCM_BASE + 0x18)
-#define MXC_CCM_SRPCTL (MXC_CCM_BASE + 0x18)
-#define MX35_CCM_MPCTL (MXC_CCM_BASE + 0x1C)
-#define MXC_CCM_COSR (MXC_CCM_BASE + 0x1C)
-#define MX35_CCM_PPCTL (MXC_CCM_BASE + 0x20)
-#define MXC_CCM_CGR0 (MXC_CCM_BASE + 0x20)
-#define MX35_CCM_ACMR (MXC_CCM_BASE + 0x24)
-#define MXC_CCM_CGR1 (MXC_CCM_BASE + 0x24)
-#define MX35_CCM_COSR (MXC_CCM_BASE + 0x28)
-#define MXC_CCM_CGR2 (MXC_CCM_BASE + 0x28)
-#define MX35_CCM_CGR0 (MXC_CCM_BASE + 0x2C)
-#define MXC_CCM_WIMR (MXC_CCM_BASE + 0x2C)
-#define MX35_CCM_CGR1 (MXC_CCM_BASE + 0x30)
-#define MXC_CCM_LDC (MXC_CCM_BASE + 0x30)
-#define MX35_CCM_CGR2 (MXC_CCM_BASE + 0x34)
-#define MXC_CCM_DCVR0 (MXC_CCM_BASE + 0x34)
-#define MX35_CCM_CGR3 (MXC_CCM_BASE + 0x38)
-#define MXC_CCM_DCVR1 (MXC_CCM_BASE + 0x38)
-#define MXC_CCM_DCVR2 (MXC_CCM_BASE + 0x3C)
-#define MXC_CCM_DCVR3 (MXC_CCM_BASE + 0x40)
-#define MXC_CCM_LTR0 (MXC_CCM_BASE + 0x44)
-#define MXC_CCM_LTR1 (MXC_CCM_BASE + 0x48)
-#define MXC_CCM_LTR2 (MXC_CCM_BASE + 0x4C)
-#define MXC_CCM_LTR3 (MXC_CCM_BASE + 0x50)
-#define MXC_CCM_LTBR0 (MXC_CCM_BASE + 0x54)
-#define MXC_CCM_LTBR1 (MXC_CCM_BASE + 0x58)
-#define MXC_CCM_PMCR0 (MXC_CCM_BASE + 0x5C)
-#define MXC_CCM_PMCR1 (MXC_CCM_BASE + 0x60)
-#define MXC_CCM_PDR2 (MXC_CCM_BASE + 0x64)
+#define MXC_CCM_CCMR 0x00
+#define MXC_CCM_PDR0 0x04
+#define MXC_CCM_PDR1 0x08
+#define MX35_CCM_PDR2 0x0C
+#define MXC_CCM_RCSR 0x0C
+#define MX35_CCM_PDR3 0x10
+#define MXC_CCM_MPCTL 0x10
+#define MX35_CCM_PDR4 0x14
+#define MXC_CCM_UPCTL 0x14
+#define MX35_CCM_RCSR 0x18
+#define MXC_CCM_SRPCTL 0x18
+#define MX35_CCM_MPCTL 0x1C
+#define MXC_CCM_COSR 0x1C
+#define MX35_CCM_PPCTL 0x20
+#define MXC_CCM_CGR0 0x20
+#define MX35_CCM_ACMR 0x24
+#define MXC_CCM_CGR1 0x24
+#define MX35_CCM_COSR 0x28
+#define MXC_CCM_CGR2 0x28
+#define MX35_CCM_CGR0 0x2C
+#define MXC_CCM_WIMR 0x2C
+#define MX35_CCM_CGR1 0x30
+#define MXC_CCM_LDC 0x30
+#define MX35_CCM_CGR2 0x34
+#define MXC_CCM_DCVR0 0x34
+#define MX35_CCM_CGR3 0x38
+#define MXC_CCM_DCVR1 0x38
+#define MXC_CCM_DCVR2 0x3C
+#define MXC_CCM_DCVR3 0x40
+#define MXC_CCM_LTR0 0x44
+#define MXC_CCM_LTR1 0x48
+#define MXC_CCM_LTR2 0x4C
+#define MXC_CCM_LTR3 0x50
+#define MXC_CCM_LTBR0 0x54
+#define MXC_CCM_LTBR1 0x58
+#define MXC_CCM_PMCR0 0x5C
+#define MXC_CCM_PMCR1 0x60
+#define MXC_CCM_PDR2 0x64
/* Register bit definitions */
#define MXC_CCM_CCMR_WBEN (1 << 27)
diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
index 574eca4b89a5..eb04b6248e48 100644
--- a/arch/arm/mach-imx/imx53-dt.c
+++ b/arch/arm/mach-imx/imx53-dt.c
@@ -10,6 +10,9 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/err.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
@@ -81,6 +84,19 @@ static const struct of_device_id imx53_iomuxc_of_match[] __initconst = {
{ /* sentinel */ }
};
+static void __init imx53_qsb_init(void)
+{
+ struct clk *clk;
+
+ clk = clk_get_sys(NULL, "ssi_ext1");
+ if (IS_ERR(clk)) {
+ pr_err("failed to get clk ssi_ext1\n");
+ return;
+ }
+
+ clk_register_clkdev(clk, NULL, "0-000a");
+}
+
static void __init imx53_dt_init(void)
{
struct device_node *node;
@@ -99,6 +115,9 @@ static void __init imx53_dt_init(void)
of_node_put(node);
}
+ if (of_machine_is_compatible("fsl,imx53-qsb"))
+ imx53_qsb_init();
+
of_platform_populate(NULL, of_default_bus_match_table,
imx53_auxdata_lookup, NULL);
}
diff --git a/arch/arm/mach-imx/lluart.c b/arch/arm/mach-imx/lluart.c
index 0213f8dcee81..c40a34c00489 100644
--- a/arch/arm/mach-imx/lluart.c
+++ b/arch/arm/mach-imx/lluart.c
@@ -17,6 +17,12 @@
#include <mach/hardware.h>
static struct map_desc imx_lluart_desc = {
+#ifdef CONFIG_DEBUG_IMX6Q_UART2
+ .virtual = MX6Q_IO_P2V(MX6Q_UART2_BASE_ADDR),
+ .pfn = __phys_to_pfn(MX6Q_UART2_BASE_ADDR),
+ .length = MX6Q_UART2_SIZE,
+ .type = MT_DEVICE,
+#endif
#ifdef CONFIG_DEBUG_IMX6Q_UART4
.virtual = MX6Q_IO_P2V(MX6Q_UART4_BASE_ADDR),
.pfn = __phys_to_pfn(MX6Q_UART4_BASE_ADDR),
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 3df360a52c17..b47e98b7d539 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -10,6 +10,8 @@
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <linux/clk.h>
+#include <linux/clkdev.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
@@ -64,18 +66,53 @@ soft:
/* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
static int ksz9021rn_phy_fixup(struct phy_device *phydev)
{
- /* min rx data delay */
- phy_write(phydev, 0x0b, 0x8105);
- phy_write(phydev, 0x0c, 0x0000);
+ if (IS_ENABLED(CONFIG_PHYLIB)) {
+ /* min rx data delay */
+ phy_write(phydev, 0x0b, 0x8105);
+ phy_write(phydev, 0x0c, 0x0000);
- /* max rx/tx clock delay, min rx/tx control delay */
- phy_write(phydev, 0x0b, 0x8104);
- phy_write(phydev, 0x0c, 0xf0f0);
- phy_write(phydev, 0x0b, 0x104);
+ /* max rx/tx clock delay, min rx/tx control delay */
+ phy_write(phydev, 0x0b, 0x8104);
+ phy_write(phydev, 0x0c, 0xf0f0);
+ phy_write(phydev, 0x0b, 0x104);
+ }
return 0;
}
+static void __init imx6q_sabrelite_cko1_setup(void)
+{
+ struct clk *cko1_sel, *ahb, *cko1;
+ unsigned long rate;
+
+ cko1_sel = clk_get_sys(NULL, "cko1_sel");
+ ahb = clk_get_sys(NULL, "ahb");
+ cko1 = clk_get_sys(NULL, "cko1");
+ if (IS_ERR(cko1_sel) || IS_ERR(ahb) || IS_ERR(cko1)) {
+ pr_err("cko1 setup failed!\n");
+ goto put_clk;
+ }
+ clk_set_parent(cko1_sel, ahb);
+ rate = clk_round_rate(cko1, 16000000);
+ clk_set_rate(cko1, rate);
+ clk_register_clkdev(cko1, NULL, "0-000a");
+put_clk:
+ if (!IS_ERR(cko1_sel))
+ clk_put(cko1_sel);
+ if (!IS_ERR(ahb))
+ clk_put(ahb);
+ if (!IS_ERR(cko1))
+ clk_put(cko1);
+}
+
+static void __init imx6q_sabrelite_init(void)
+{
+ if (IS_ENABLED(CONFIG_PHYLIB))
+ phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
+ ksz9021rn_phy_fixup);
+ imx6q_sabrelite_cko1_setup();
+}
+
static void __init imx6q_init_machine(void)
{
/*
@@ -85,8 +122,7 @@ static void __init imx6q_init_machine(void)
pinctrl_provide_dummies();
if (of_machine_is_compatible("fsl,imx6q-sabrelite"))
- phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
- ksz9021rn_phy_fixup);
+ imx6q_sabrelite_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -139,6 +175,7 @@ static struct sys_timer imx6q_timer = {
static const char *imx6q_dt_compat[] __initdata = {
"fsl,imx6q-arm2",
"fsl,imx6q-sabrelite",
+ "fsl,imx6q-sabresd",
"fsl,imx6q",
NULL,
};
diff --git a/arch/arm/mach-imx/mach-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
index e4b822e9f719..517672ebcbc5 100644
--- a/arch/arm/mach-imx/mach-mx51_babbage.c
+++ b/arch/arm/mach-imx/mach-mx51_babbage.c
@@ -163,6 +163,12 @@ static iomux_v3_cfg_t mx51babbage_pads[] = {
MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK,
MX51_PAD_CSPI1_SS0__GPIO4_24,
MX51_PAD_CSPI1_SS1__GPIO4_25,
+
+ /* Audio */
+ MX51_PAD_AUD3_BB_TXD__AUD3_TXD,
+ MX51_PAD_AUD3_BB_RXD__AUD3_RXD,
+ MX51_PAD_AUD3_BB_CK__AUD3_TXC,
+ MX51_PAD_AUD3_BB_FS__AUD3_TXFS,
};
/* Serial ports */
diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c
index 9128d15b1eb7..967ed5b35a45 100644
--- a/arch/arm/mach-imx/mm-imx3.c
+++ b/arch/arm/mach-imx/mm-imx3.c
@@ -32,6 +32,10 @@
#include <mach/iomux-v3.h>
#include <mach/irqs.h>
+#include "crmregs-imx3.h"
+
+void __iomem *mx3_ccm_base;
+
static void imx3_idle(void)
{
unsigned long reg = 0;
@@ -138,6 +142,7 @@ void __init imx31_init_early(void)
mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR));
arch_ioremap_caller = imx3_ioremap_caller;
arm_pm_idle = imx3_idle;
+ mx3_ccm_base = MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR);
}
void __init mx31_init_irq(void)
@@ -211,6 +216,7 @@ void __init imx35_init_early(void)
mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR));
arm_pm_idle = imx3_idle;
arch_ioremap_caller = imx3_ioremap_caller;
+ mx3_ccm_base = MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR);
}
void __init mx35_init_irq(void)
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index ba91e6b31cf4..8b4dc20c7c53 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -33,6 +33,7 @@ static void imx5_idle(void)
gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
if (IS_ERR(gpc_dvfs_clk))
return;
+ clk_prepare(gpc_dvfs_clk);
}
clk_enable(gpc_dvfs_clk);
mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
diff --git a/arch/arm/mach-imx/pm-imx3.c b/arch/arm/mach-imx/pm-imx3.c
index b3752439632e..822103bdb709 100644
--- a/arch/arm/mach-imx/pm-imx3.c
+++ b/arch/arm/mach-imx/pm-imx3.c
@@ -21,14 +21,14 @@
*/
void mx3_cpu_lp_set(enum mx3_cpu_pwr_mode mode)
{
- int reg = __raw_readl(MXC_CCM_CCMR);
+ int reg = __raw_readl(mx3_ccm_base + MXC_CCM_CCMR);
reg &= ~MXC_CCM_CCMR_LPM_MASK;
switch (mode) {
case MX3_WAIT:
if (cpu_is_mx35())
reg |= MXC_CCM_CCMR_LPM_WAIT_MX35;
- __raw_writel(reg, MXC_CCM_CCMR);
+ __raw_writel(reg, mx3_ccm_base + MXC_CCM_CCMR);
break;
default:
pr_err("Unknown cpu power mode: %d\n", mode);
diff --git a/arch/arm/plat-mxc/clock.c b/arch/arm/plat-mxc/clock.c
index 2ed3ab173add..5079787273d2 100644
--- a/arch/arm/plat-mxc/clock.c
+++ b/arch/arm/plat-mxc/clock.c
@@ -41,6 +41,7 @@
#include <mach/clock.h>
#include <mach/hardware.h>
+#ifndef CONFIG_COMMON_CLK
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
@@ -200,6 +201,16 @@ struct clk *clk_get_parent(struct clk *clk)
}
EXPORT_SYMBOL(clk_get_parent);
+#else
+
+/*
+ * Lock to protect the clock module (ccm) registers. Used
+ * on all i.MXs
+ */
+DEFINE_SPINLOCK(imx_ccm_lock);
+
+#endif /* CONFIG_COMMON_CLK */
+
/*
* Get the resulting clock rate from a PLL register value and the input
* frequency. PLLs with this register layout can at least be found on
diff --git a/arch/arm/plat-mxc/include/mach/clock.h b/arch/arm/plat-mxc/include/mach/clock.h
index 753a5988d85c..bd940c795cbb 100644
--- a/arch/arm/plat-mxc/include/mach/clock.h
+++ b/arch/arm/plat-mxc/include/mach/clock.h
@@ -23,6 +23,7 @@
#ifndef __ASSEMBLY__
#include <linux/list.h>
+#ifndef CONFIG_COMMON_CLK
struct module;
struct clk {
@@ -59,6 +60,9 @@ struct clk {
int clk_register(struct clk *clk);
void clk_unregister(struct clk *clk);
+#endif /* CONFIG_COMMON_CLK */
+
+extern spinlock_t imx_ccm_lock;
unsigned long mxc_decode_pll(unsigned int pll, u32 f_ref);
diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S
index 8ddda365f1a0..761e45f9456f 100644
--- a/arch/arm/plat-mxc/include/mach/debug-macro.S
+++ b/arch/arm/plat-mxc/include/mach/debug-macro.S
@@ -24,6 +24,8 @@
#define UART_PADDR MX51_UART1_BASE_ADDR
#elif defined (CONFIG_DEBUG_IMX50_IMX53_UART)
#define UART_PADDR MX53_UART1_BASE_ADDR
+#elif defined (CONFIG_DEBUG_IMX6Q_UART2)
+#define UART_PADDR MX6Q_UART2_BASE_ADDR
#elif defined (CONFIG_DEBUG_IMX6Q_UART4)
#define UART_PADDR MX6Q_UART4_BASE_ADDR
#endif
diff --git a/arch/arm/plat-mxc/include/mach/mx6q.h b/arch/arm/plat-mxc/include/mach/mx6q.h
index 254a561a2799..f7e7dbac8f4b 100644
--- a/arch/arm/plat-mxc/include/mach/mx6q.h
+++ b/arch/arm/plat-mxc/include/mach/mx6q.h
@@ -27,6 +27,8 @@
#define MX6Q_CCM_SIZE 0x4000
#define MX6Q_ANATOP_BASE_ADDR 0x020c8000
#define MX6Q_ANATOP_SIZE 0x1000
+#define MX6Q_UART2_BASE_ADDR 0x021e8000
+#define MX6Q_UART2_SIZE 0x4000
#define MX6Q_UART4_BASE_ADDR 0x021f0000
#define MX6Q_UART4_SIZE 0x4000
diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c
index 7daf7c9a413b..99f958ca6cb8 100644
--- a/arch/arm/plat-mxc/time.c
+++ b/arch/arm/plat-mxc/time.c
@@ -25,6 +25,7 @@
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <mach/hardware.h>
#include <asm/sched_clock.h>
@@ -282,6 +283,19 @@ static int __init mxc_clockevent_init(struct clk *timer_clk)
void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
{
uint32_t tctl_val;
+ struct clk *timer_ipg_clk;
+
+ if (!timer_clk) {
+ timer_clk = clk_get_sys("imx-gpt.0", "per");
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX timer: unable to get clk\n");
+ return;
+ }
+
+ timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
+ if (!IS_ERR(timer_ipg_clk))
+ clk_prepare_enable(timer_ipg_clk);
+ }
clk_prepare_enable(timer_clk);