Merge remote-tracking branch 'tip/perf/urgent' into perf/core

Merge reason: We are going to queue up a dependent patch:

"perf tools: Move parse event automated tests to separated object"

That depends on:

commit e7c72d8
perf tools: Add 'G' and 'H' modifiers to event parsing

Conflicts:
	tools/perf/builtin-stat.c

Conflicted with the recent 'perf_target' patches when checking the
result of perf_evsel open routines to see if a retry is needed to cope
with older kernels where the exclude guest/host perf_event_attr bits
were not used.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

35 files changed, 397 insertions, 234 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index cf006d40342c..36586dba6fa6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1186,6 +1186,15 @@ if !MMU
 source "arch/arm/Kconfig-nommu"
 endif
 
+config ARM_ERRATA_326103
+	bool "ARM errata: FSR write bit incorrect on a SWP to read-only memory"
+	depends on CPU_V6
+	help
+	  Executing a SWP instruction to read-only memory does not set bit 11
+	  of the FSR on the ARM 1136 prior to r1p0. This causes the kernel to
+	  treat the access as a read, preventing a COW from occurring and
+	  causing the faulting task to livelock.
+
 config ARM_ERRATA_411920
 	bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
 	depends on CPU_V6 || CPU_V6K
diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts
index 15ded0deaa79..45bc4bb04e57 100644
--- a/arch/arm/boot/dts/msm8660-surf.dts
+++ b/arch/arm/boot/dts/msm8660-surf.dts
@@ -10,7 +10,7 @@
 	intc: interrupt-controller@02080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
-		#interrupt-cells = <1>;
+		#interrupt-cells = <3>;
 		reg = < 0x02080000 0x1000 >,
 		      < 0x02081000 0x1000 >;
 	};
@@ -19,6 +19,6 @@
 		compatible = "qcom,msm-hsuart", "qcom,msm-uart";
 		reg = <0x19c40000 0x1000>,
 		      <0x19c00000 0x1000>;
-		interrupts = <195>;
+		interrupts = <0 195 0x0>;
 	};
 };
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 0b32925f2147..e2fe3195c0d1 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -173,7 +173,7 @@
 			mmc@5000 {
 				compatible = "arm,primecell";
 				reg = < 0x5000 0x1000>;
-				interrupts = <22>;
+				interrupts = <22 34>;
 			};
 			kmi@6000 {
 				compatible = "arm,pl050", "arm,primecell";
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index 166461073b78..7e8175269064 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -41,7 +41,7 @@
 			mmc@b000 {
 				compatible = "arm,primecell";
 				reg = <0xb000 0x1000>;
-				interrupts = <23>;
+				interrupts = <23 34>;
 			};
 		};
 	};
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index 42da9183acc8..082175c54e7c 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -14,6 +14,8 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_BLK_DEV_INTEGRITY=y
 CONFIG_ARCH_S3C24XX=y
+# CONFIG_CPU_S3C2410 is not set
+CONFIG_CPU_S3C2440=y
 CONFIG_S3C_ADC=y
 CONFIG_S3C24XX_PWM=y
 CONFIG_MACH_MINI2440=y
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index d4c24d412a8d..0f04d84582e1 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -118,6 +118,13 @@ extern void iwmmxt_task_switch(struct thread_info *);
 extern void vfp_sync_hwstate(struct thread_info *);
 extern void vfp_flush_hwstate(struct thread_info *);
 
+struct user_vfp;
+struct user_vfp_exc;
+
+extern int vfp_preserve_user_clear_hwstate(struct user_vfp __user *,
+					   struct user_vfp_exc __user *);
+extern int vfp_restore_user_hwstate(struct user_vfp __user *,
+				    struct user_vfp_exc __user *);
 #endif
 
 /*
diff --git a/arch/arm/include/asm/tls.h b/arch/arm/include/asm/tls.h
index 60843eb0f61c..73409e6c0251 100644
--- a/arch/arm/include/asm/tls.h
+++ b/arch/arm/include/asm/tls.h
@@ -7,6 +7,8 @@
 
 	.macro set_tls_v6k, tp, tmp1, tmp2
 	mcr	p15, 0, \tp, c13, c0, 3		@ set TLS register
+	mov	\tmp1, #0
+	mcr	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	.endm
 
 	.macro set_tls_v6, tp, tmp1, tmp2
@@ -15,6 +17,8 @@
 	mov	\tmp2, #0xffff0fff
 	tst	\tmp1, #HWCAP_TLS		@ hardware TLS available?
 	mcrne	p15, 0, \tp, c13, c0, 3		@ yes, set TLS register
+	movne	\tmp1, #0
+	mcrne	p15, 0, \tmp1, c13, c0, 2	@ clear user r/w TLS register
 	streq	\tp, [\tmp2, #-15]		@ set TLS value at 0xffff0ff0
 	.endm
 
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index 71ccdbfed662..8349d4e97e2b 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -155,10 +155,10 @@ static bool migrate_one_irq(struct irq_desc *desc)
 	}
 
 	c = irq_data_get_irq_chip(d);
-	if (c->irq_set_affinity)
-		c->irq_set_affinity(d, affinity, true);
-	else
+	if (!c->irq_set_affinity)
 		pr_debug("IRQ%u: unable to set affinity\n", d->irq);
+	else if (c->irq_set_affinity(d, affinity, true) == IRQ_SET_MASK_OK && ret)
+		cpumask_copy(d->affinity, affinity);
 
 	return ret;
 }
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 7cb532fc8aa4..d68d1b694680 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -180,44 +180,23 @@ static int restore_iwmmxt_context(struct iwmmxt_sigframe *frame)
 
 static int preserve_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	const unsigned long magic = VFP_MAGIC;
 	const unsigned long size = VFP_STORAGE_SIZE;
 	int err = 0;
 
-	vfp_sync_hwstate(thread);
 	__put_user_error(magic, &frame->magic, err);
 	__put_user_error(size, &frame->size, err);
 
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_to_user(&frame->ufp.fpregs, &h->fpregs,
-			      sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__put_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Copy the exception registers.
-	 */
-	__put_user_error(h->fpexc, &frame->ufp_exc.fpexc, err);
-	__put_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__put_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
+	if (err)
+		return -EFAULT;
 
-	return err ? -EFAULT : 0;
+	return vfp_preserve_user_clear_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 static int restore_vfp_context(struct vfp_sigframe __user *frame)
 {
-	struct thread_info *thread = current_thread_info();
-	struct vfp_hard_struct *h = &thread->vfpstate.hard;
 	unsigned long magic;
 	unsigned long size;
-	unsigned long fpexc;
 	int err = 0;
 
 	__get_user_error(magic, &frame->magic, err);
@@ -228,33 +207,7 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
 	if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
 		return -EINVAL;
 
-	vfp_flush_hwstate(thread);
-
-	/*
-	 * Copy the floating point registers. There can be unused
-	 * registers see asm/hwcap.h for details.
-	 */
-	err |= __copy_from_user(&h->fpregs, &frame->ufp.fpregs,
-				sizeof(h->fpregs));
-	/*
-	 * Copy the status and control register.
-	 */
-	__get_user_error(h->fpscr, &frame->ufp.fpscr, err);
-
-	/*
-	 * Sanitise and restore the exception registers.
-	 */
-	__get_user_error(fpexc, &frame->ufp_exc.fpexc, err);
-	/* Ensure the VFP is enabled. */
-	fpexc |= FPEXC_EN;
-	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
-	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
-	h->fpexc = fpexc;
-
-	__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
-	__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
-
-	return err ? -EFAULT : 0;
+	return vfp_restore_user_hwstate(&frame->ufp, &frame->ufp_exc);
 }
 
 #endif
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index addbbe8028c2..f6a4d32b0421 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -510,10 +510,6 @@ static void ipi_cpu_stop(unsigned int cpu)
 	local_fiq_disable();
 	local_irq_disable();
 
-#ifdef CONFIG_HOTPLUG_CPU
-	platform_cpu_kill(cpu);
-#endif
-
 	while (1)
 		cpu_relax();
 }
@@ -576,17 +572,25 @@ void smp_send_reschedule(int cpu)
 	smp_cross_call(cpumask_of(cpu), IPI_RESCHEDULE);
 }
 
+#ifdef CONFIG_HOTPLUG_CPU
+static void smp_kill_cpus(cpumask_t *mask)
+{
+	unsigned int cpu;
+	for_each_cpu(cpu, mask)
+		platform_cpu_kill(cpu);
+}
+#else
+static void smp_kill_cpus(cpumask_t *mask) { }
+#endif
+
 void smp_send_stop(void)
 {
 	unsigned long timeout;
+	struct cpumask mask;
 
-	if (num_online_cpus() > 1) {
-		struct cpumask mask;
-		cpumask_copy(&mask, cpu_online_mask);
-		cpumask_clear_cpu(smp_processor_id(), &mask);
-
-		smp_cross_call(&mask, IPI_CPU_STOP);
-	}
+	cpumask_copy(&mask, cpu_online_mask);
+	cpumask_clear_cpu(smp_processor_id(), &mask);
+	smp_cross_call(&mask, IPI_CPU_STOP);
 
 	/* Wait up to one second for other CPUs to stop */
 	timeout = USEC_PER_SEC;
@@ -595,6 +599,8 @@ void smp_send_stop(void)
 
 	if (num_online_cpus() > 1)
 		pr_warning("SMP: failed to stop secondary CPUs\n");
+
+	smp_kill_cpus(&mask);
 }
 
 /*
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 5b150afb995b..fef42b21cecb 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -118,14 +118,10 @@ static int twd_cpufreq_transition(struct notifier_block *nb,
 	 * The twd clock events must be reprogrammed to account for the new
 	 * frequency.  The timer is local to a cpu, so cross-call to the
 	 * changing cpu.
-	 *
-	 * Only wait for it to finish, if the cpu is active to avoid
-	 * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during
-	 * booting of that cpu.
 	 */
 	if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE)
 		smp_call_function_single(freqs->cpu, twd_update_frequency,
-					 NULL, cpu_active(freqs->cpu));
+			NULL, 1);
 
 	return NOTIFY_OK;
 }
diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c
index df54c2a92225..6efd1e5919fd 100644
--- a/arch/arm/mach-exynos/clock-exynos4.c
+++ b/arch/arm/mach-exynos/clock-exynos4.c
@@ -497,25 +497,25 @@ static struct clk exynos4_init_clocks_off[] = {
 		.ctrlbit	= (1 << 3),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 5),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 6),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 7),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_aclk_133.clk,
 		.enable		= exynos4_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1202,7 +1202,7 @@ static struct clksrc_clk exynos4_clk_sclk_uart3 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos4_clk_dout_mmc0.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -1213,7 +1213,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos4_clk_dout_mmc1.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -1224,7 +1224,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos4_clk_dout_mmc2.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -1235,7 +1235,7 @@ static struct clksrc_clk exynos4_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos4_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos4_clk_dout_mmc3.clk,
 		.enable		= exynos4_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -1340,10 +1340,10 @@ static struct clk_lookup exynos4_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos4_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos4_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos4_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos4_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos4_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos4_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos4_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("exynos4-fb.0", "lcd", &exynos4_clk_fimd0),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1),
diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c
index d013982d0f8e..5cd7a8b8868c 100644
--- a/arch/arm/mach-exynos/clock-exynos5.c
+++ b/arch/arm/mach-exynos/clock-exynos5.c
@@ -455,25 +455,25 @@ static struct clk exynos5_init_clocks_off[] = {
 		.ctrlbit	= (1 << 20),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 13),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 14),
 	}, {
 		.name		= "hsmmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_aclk_200.clk,
 		.enable		= exynos5_clk_ip_fsys_ctrl,
 		.ctrlbit	= (1 << 15),
@@ -813,7 +813,7 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.0",
+		.devname	= "exynos4-sdhci.0",
 		.parent		= &exynos5_clk_dout_mmc0.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 0),
@@ -824,7 +824,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.1",
+		.devname	= "exynos4-sdhci.1",
 		.parent		= &exynos5_clk_dout_mmc1.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 4),
@@ -835,7 +835,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.2",
+		.devname	= "exynos4-sdhci.2",
 		.parent		= &exynos5_clk_dout_mmc2.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 8),
@@ -846,7 +846,7 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = {
 static struct clksrc_clk exynos5_clk_sclk_mmc3 = {
 	.clk	= {
 		.name		= "sclk_mmc",
-		.devname	= "s3c-sdhci.3",
+		.devname	= "exynos4-sdhci.3",
 		.parent		= &exynos5_clk_dout_mmc3.clk,
 		.enable		= exynos5_clksrc_mask_fsys_ctrl,
 		.ctrlbit	= (1 << 12),
@@ -990,10 +990,10 @@ static struct clk_lookup exynos5_clk_lookup[] = {
 	CLKDEV_INIT("exynos4210-uart.1", "clk_uart_baud0", &exynos5_clk_sclk_uart1.clk),
 	CLKDEV_INIT("exynos4210-uart.2", "clk_uart_baud0", &exynos5_clk_sclk_uart2.clk),
 	CLKDEV_INIT("exynos4210-uart.3", "clk_uart_baud0", &exynos5_clk_sclk_uart3.clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
-	CLKDEV_INIT("s3c-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
-	CLKDEV_INIT("s3c-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
+	CLKDEV_INIT("exynos4-sdhci.0", "mmc_busclk.2", &exynos5_clk_sclk_mmc0.clk),
+	CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk),
+	CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk),
+	CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk),
 	CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0),
 	CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1),
 	CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1),
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index 8614aab47cc0..5ccd6e80a607 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -326,6 +326,11 @@ static void __init exynos4_map_io(void)
 	s3c_fimc_setname(2, "exynos4-fimc");
 	s3c_fimc_setname(3, "exynos4-fimc");
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -344,6 +349,11 @@ static void __init exynos5_map_io(void)
 	s3c_device_i2c0.resource[1].start = EXYNOS5_IRQ_IIC;
 	s3c_device_i2c0.resource[1].end   = EXYNOS5_IRQ_IIC;
 
+	s3c_sdhci_setname(0, "exynos4-sdhci");
+	s3c_sdhci_setname(1, "exynos4-sdhci");
+	s3c_sdhci_setname(2, "exynos4-sdhci");
+	s3c_sdhci_setname(3, "exynos4-sdhci");
+
 	/* The I2C bus controllers are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
 	s3c_i2c1_setname("s3c2440-i2c");
@@ -537,7 +547,9 @@ void __init exynos5_init_irq(void)
 {
 	int irq;
 
-	gic_init(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
+#ifdef CONFIG_OF
+	of_irq_init(exynos4_dt_irq_match);
+#endif
 
 	for (irq = 0; irq < EXYNOS5_MAX_COMBINER_NR; irq++) {
 		combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),
diff --git a/arch/arm/mach-exynos/dev-dwmci.c b/arch/arm/mach-exynos/dev-dwmci.c
index b025db4bf602..79035018fb74 100644
--- a/arch/arm/mach-exynos/dev-dwmci.c
+++ b/arch/arm/mach-exynos/dev-dwmci.c
@@ -16,6 +16,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/ioport.h>
 #include <linux/mmc/dw_mmc.h>
 
 #include <plat/devs.h>
@@ -33,16 +34,8 @@ static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data)
 }
 
 static struct resource exynos4_dwmci_resource[] = {
-	[0] = {
-		.start	= EXYNOS4_PA_DWMCI,
-		.end	= EXYNOS4_PA_DWMCI + SZ_4K - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= IRQ_DWMCI,
-		.end	= IRQ_DWMCI,
-		.flags	= IORESOURCE_IRQ,
-	}
+	[0] = DEFINE_RES_MEM(EXYNOS4_PA_DWMCI, SZ_4K),
+	[1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_DWMCI),
 };
 
 static struct dw_mci_board exynos4_dwci_pdata = {
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index b4f1f902ce6d..ed90aef404c3 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -112,6 +112,7 @@ static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
 				MMC_CAP_ERASE),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 7ebf79c2ab34..cb2b027f09a6 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -747,6 +747,7 @@ static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
 	.max_width		= 8,
 	.host_caps		= (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
 				MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 	.clk_type		= S3C_SDHCI_CLK_DIV_EXTERNAL,
 };
diff --git a/arch/arm/mach-msm/board-msm8x60.c b/arch/arm/mach-msm/board-msm8x60.c
index 962e71169750..fb3496a52ef4 100644
--- a/arch/arm/mach-msm/board-msm8x60.c
+++ b/arch/arm/mach-msm/board-msm8x60.c
@@ -17,6 +17,7 @@
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/memblock.h>
 
@@ -49,10 +50,22 @@ static void __init msm8x60_map_io(void)
 	msm_map_msm8x60_io();
 }
 
+#ifdef CONFIG_OF
+static struct of_device_id msm_dt_gic_match[] __initdata = {
+	{ .compatible = "qcom,msm-8660-qgic", .data = gic_of_init },
+	{}
+};
+#endif
+
 static void __init msm8x60_init_irq(void)
 {
-	gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
-		 (void *)MSM_QGIC_CPU_BASE);
+	if (!of_have_populated_dt())
+		gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
+			 (void *)MSM_QGIC_CPU_BASE);
+#ifdef CONFIG_OF
+	else
+		of_irq_init(msm_dt_gic_match);
+#endif
 
 	/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
 	writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);
@@ -73,16 +86,8 @@ static struct of_dev_auxdata msm_auxdata_lookup[] __initdata = {
 	{}
 };
 
-static struct of_device_id msm_dt_gic_match[] __initdata = {
-	{ .compatible = "qcom,msm-8660-qgic", },
-	{}
-};
-
 static void __init msm8x60_dt_init(void)
 {
-	irq_domain_generate_simple(msm_dt_gic_match, MSM8X60_QGIC_DIST_PHYS,
-				GIC_SPI_START);
-
 	if (of_machine_is_compatible("qcom,msm8660-surf")) {
 		printk(KERN_INFO "Init surf UART registers\n");
 		msm8x60_init_uart12dm();
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
index c54cef25895c..cbf51ae81855 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -17,6 +17,7 @@
  *
  * bit     23 - Input/Output (PXA2xx specific)
  * bit     24 - Wakeup Enable(PXA2xx specific)
+ * bit     25 - Keep Output  (PXA2xx specific)
  */
 
 #define MFP_DIR_IN		(0x0 << 23)
@@ -25,6 +26,12 @@
 #define MFP_DIR(x)		(((x) >> 23) & 0x1)
 
 #define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+
+/*
+ * MFP_LPM_KEEP_OUTPUT must be specified for pins that need to
+ * retain their last output level (low or high).
+ * Note: MFP_LPM_KEEP_OUTPUT has no effect on pins configured for input.
+ */
 #define MFP_LPM_KEEP_OUTPUT	(0x1 << 25)
 
 #define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index b0a842887780..ef0426a159d4 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -33,6 +33,8 @@
 #define BANK_OFF(n)	(((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2))
 #define GPLR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5))
 #define GPDR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x0c)
+#define GPSR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x18)
+#define GPCR(x)		__REG2(0x40E00000, BANK_OFF((x) >> 5) + 0x24)
 
 #define PWER_WE35	(1 << 24)
 
@@ -348,6 +350,7 @@ static inline void pxa27x_mfp_init(void) {}
 #ifdef CONFIG_PM
 static unsigned long saved_gafr[2][4];
 static unsigned long saved_gpdr[4];
+static unsigned long saved_gplr[4];
 static unsigned long saved_pgsr[4];
 
 static int pxa2xx_mfp_suspend(void)
@@ -366,14 +369,26 @@ static int pxa2xx_mfp_suspend(void)
 	}
 
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
-
 		saved_gafr[0][i] = GAFR_L(i);
 		saved_gafr[1][i] = GAFR_U(i);
 		saved_gpdr[i] = GPDR(i * 32);
+		saved_gplr[i] = GPLR(i * 32);
 		saved_pgsr[i] = PGSR(i);
 
-		GPDR(i * 32) = gpdr_lpm[i];
+		GPSR(i * 32) = PGSR(i);
+		GPCR(i * 32) = ~PGSR(i);
+	}
+
+	/* set GPDR bits taking into account MFP_LPM_KEEP_OUTPUT */
+	for (i = 0; i < pxa_last_gpio; i++) {
+		if ((gpdr_lpm[gpio_to_bank(i)] & GPIO_bit(i)) ||
+		    ((gpio_desc[i].config & MFP_LPM_KEEP_OUTPUT) &&
+		     (saved_gpdr[gpio_to_bank(i)] & GPIO_bit(i))))
+			GPDR(i) |= GPIO_bit(i);
+		else
+			GPDR(i) &= ~GPIO_bit(i);
 	}
+
 	return 0;
 }
 
@@ -384,6 +399,8 @@ static void pxa2xx_mfp_resume(void)
 	for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++) {
 		GAFR_L(i) = saved_gafr[0][i];
 		GAFR_U(i) = saved_gafr[1][i];
+		GPSR(i * 32) = saved_gplr[i];
+		GPCR(i * 32) = ~saved_gplr[i];
 		GPDR(i * 32) = saved_gpdr[i];
 		PGSR(i) = saved_pgsr[i];
 	}
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 6bce78edce7a..4726c246dcdc 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -421,8 +421,11 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 	pxa_register_device(&pxa27x_device_i2c_power, info);
 }
 
+static struct pxa_gpio_platform_data pxa27x_gpio_info __initdata = {
+	.gpio_set_wake = gpio_set_wake,
+};
+
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_gpio,
 	&pxa27x_device_udc,
 	&pxa_device_pmu,
 	&pxa_device_i2s,
@@ -458,6 +461,7 @@ static int __init pxa27x_init(void)
 		register_syscore_ops(&pxa2xx_mfp_syscore_ops);
 		register_syscore_ops(&pxa2xx_clock_syscore_ops);
 
+		pxa_register_device(&pxa_device_gpio, &pxa27x_gpio_info);
 		ret = platform_add_devices(devices, ARRAY_SIZE(devices));
 	}
 
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 0f3a327ebcaa..b34287ab5afd 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -111,10 +111,6 @@ config S3C24XX_SETUP_TS
 	help
 	  Compile in platform device definition for Samsung TouchScreen.
 
-# cpu-specific sections
-
-if CPU_S3C2410
-
 config S3C2410_DMA
 	bool
 	depends on S3C24XX_DMA && (CPU_S3C2410 || CPU_S3C2442)
@@ -127,6 +123,10 @@ config S3C2410_PM
 	help
 	  Power Management code common to S3C2410 and better
 
+# cpu-specific sections
+
+if CPU_S3C2410
+
 config S3C24XX_SIMTEC_NOR
 	bool
 	help
diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c
index a8933de3d627..32395664e879 100644
--- a/arch/arm/mach-s5pv210/mach-goni.c
+++ b/arch/arm/mach-s5pv210/mach-goni.c
@@ -25,6 +25,7 @@
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/mmc/host.h>
 #include <linux/interrupt.h>
 
 #include <asm/hardware/vic.h>
@@ -765,6 +766,7 @@ static void __init goni_pmic_init(void)
 /* MoviNAND */
 static struct s3c_sdhci_platdata goni_hsmmc0_data __initdata = {
 	.max_width		= 4,
+	.host_caps2		= MMC_CAP2_BROKEN_VOLTAGE,
 	.cd_type		= S3C_SDHCI_CD_PERMANENT,
 };
 
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 7c524b4e415d..16be4c56abe3 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -306,7 +306,7 @@ void sa11x0_register_irda(struct irda_platform_data *irda)
 }
 
 static struct resource sa1100_rtc_resources[] = {
-	DEFINE_RES_MEM(0x90010000, 0x9001003f),
+	DEFINE_RES_MEM(0x90010000, 0x40),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTC1Hz, "rtc 1Hz"),
 	DEFINE_RES_IRQ_NAMED(IRQ_RTCAlrm, "rtc alarm"),
 };
diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c
index 1621ad07d284..33339745d432 100644
--- a/arch/arm/mach-u300/core.c
+++ b/arch/arm/mach-u300/core.c
@@ -1667,8 +1667,10 @@ void __init u300_init_irq(void)
 
 	for (i = 0; i < U300_VIC_IRQS_END; i++)
 		set_bit(i, (unsigned long *) &mask[0]);
-	vic_init((void __iomem *) U300_INTCON0_VBASE, 0, mask[0], mask[0]);
-	vic_init((void __iomem *) U300_INTCON1_VBASE, 32, mask[1], mask[1]);
+	vic_init((void __iomem *) U300_INTCON0_VBASE, IRQ_U300_INTCON0_START,
+		 mask[0], mask[0]);
+	vic_init((void __iomem *) U300_INTCON1_VBASE, IRQ_U300_INTCON1_START,
+		 mask[1], mask[1]);
 }
 
 
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index a38f80238ea9..cb04bd6ab3e7 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -146,9 +146,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.min_uV = 1800000,
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -160,9 +157,6 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.min_uV = 2500000,
 				.max_uV = 2500000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
 				.always_on = 1,
 				.boot_on = 1,
 			},
@@ -230,8 +224,7 @@ static struct ab3100_platform_data ab3100_plf_data = {
 				.max_uV = 1800000,
 				.valid_modes_mask = REGULATOR_MODE_NORMAL,
 				.valid_ops_mask =
-				REGULATOR_CHANGE_VOLTAGE |
-				REGULATOR_CHANGE_STATUS,
+				REGULATOR_CHANGE_VOLTAGE,
 				.always_on = 1,
 				.boot_on = 1,
 			},
diff --git a/arch/arm/mach-u300/include/mach/irqs.h b/arch/arm/mach-u300/include/mach/irqs.h
index ee78a26707eb..ec09c1e07b1a 100644
--- a/arch/arm/mach-u300/include/mach/irqs.h
+++ b/arch/arm/mach-u300/include/mach/irqs.h
@@ -12,101 +12,101 @@
 #ifndef __MACH_IRQS_H
 #define __MACH_IRQS_H
 
-#define IRQ_U300_INTCON0_START		0
-#define IRQ_U300_INTCON1_START		32
+#define IRQ_U300_INTCON0_START		1
+#define IRQ_U300_INTCON1_START		33
 /* These are on INTCON0 - 30 lines */
-#define IRQ_U300_IRQ0_EXT		0
-#define IRQ_U300_IRQ1_EXT		1
-#define IRQ_U300_DMA			2
-#define IRQ_U300_VIDEO_ENC_0		3
-#define IRQ_U300_VIDEO_ENC_1		4
-#define IRQ_U300_AAIF_RX		5
-#define IRQ_U300_AAIF_TX		6
-#define IRQ_U300_AAIF_VGPIO		7
-#define IRQ_U300_AAIF_WAKEUP		8
-#define IRQ_U300_PCM_I2S0_FRAME		9
-#define IRQ_U300_PCM_I2S0_FIFO		10
-#define IRQ_U300_PCM_I2S1_FRAME		11
-#define IRQ_U300_PCM_I2S1_FIFO		12
-#define IRQ_U300_XGAM_GAMCON		13
-#define IRQ_U300_XGAM_CDI		14
-#define IRQ_U300_XGAM_CDICON		15
+#define IRQ_U300_IRQ0_EXT		1
+#define IRQ_U300_IRQ1_EXT		2
+#define IRQ_U300_DMA			3
+#define IRQ_U300_VIDEO_ENC_0		4
+#define IRQ_U300_VIDEO_ENC_1		5
+#define IRQ_U300_AAIF_RX		6
+#define IRQ_U300_AAIF_TX		7
+#define IRQ_U300_AAIF_VGPIO		8
+#define IRQ_U300_AAIF_WAKEUP		9
+#define IRQ_U300_PCM_I2S0_FRAME		10
+#define IRQ_U300_PCM_I2S0_FIFO		11
+#define IRQ_U300_PCM_I2S1_FRAME		12
+#define IRQ_U300_PCM_I2S1_FIFO		13
+#define IRQ_U300_XGAM_GAMCON		14
+#define IRQ_U300_XGAM_CDI		15
+#define IRQ_U300_XGAM_CDICON		16
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
 /* MMIACC not used on the DB3210 or DB3350 chips */
-#define IRQ_U300_XGAM_MMIACC		16
+#define IRQ_U300_XGAM_MMIACC		17
 #endif
-#define IRQ_U300_XGAM_PDI		17
-#define IRQ_U300_XGAM_PDICON		18
-#define IRQ_U300_XGAM_GAMEACC		19
-#define IRQ_U300_XGAM_MCIDCT		20
-#define IRQ_U300_APEX			21
-#define IRQ_U300_UART0			22
-#define IRQ_U300_SPI			23
-#define IRQ_U300_TIMER_APP_OS		24
-#define IRQ_U300_TIMER_APP_DD		25
-#define IRQ_U300_TIMER_APP_GP1		26
-#define IRQ_U300_TIMER_APP_GP2		27
-#define IRQ_U300_TIMER_OS		28
-#define IRQ_U300_TIMER_MS		29
-#define IRQ_U300_KEYPAD_KEYBF		30
-#define IRQ_U300_KEYPAD_KEYBR		31
+#define IRQ_U300_XGAM_PDI		18
+#define IRQ_U300_XGAM_PDICON		19
+#define IRQ_U300_XGAM_GAMEACC		20
+#define IRQ_U300_XGAM_MCIDCT		21
+#define IRQ_U300_APEX			22
+#define IRQ_U300_UART0			23
+#define IRQ_U300_SPI			24
+#define IRQ_U300_TIMER_APP_OS		25
+#define IRQ_U300_TIMER_APP_DD		26
+#define IRQ_U300_TIMER_APP_GP1		27
+#define IRQ_U300_TIMER_APP_GP2		28
+#define IRQ_U300_TIMER_OS		29
+#define IRQ_U300_TIMER_MS		30
+#define IRQ_U300_KEYPAD_KEYBF		31
+#define IRQ_U300_KEYPAD_KEYBR		32
 /* These are on INTCON1 - 32 lines */
-#define IRQ_U300_GPIO_PORT0		32
-#define IRQ_U300_GPIO_PORT1		33
-#define IRQ_U300_GPIO_PORT2		34
+#define IRQ_U300_GPIO_PORT0		33
+#define IRQ_U300_GPIO_PORT1		34
+#define IRQ_U300_GPIO_PORT2		35
 
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330) || \
     defined(CONFIG_MACH_U300_BS335)
 /* These are for DB3150, DB3200 and DB3350 */
-#define IRQ_U300_WDOG			35
-#define IRQ_U300_EVHIST			36
-#define IRQ_U300_MSPRO			37
-#define IRQ_U300_MMCSD_MCIINTR0		38
-#define IRQ_U300_MMCSD_MCIINTR1		39
-#define IRQ_U300_I2C0			40
-#define IRQ_U300_I2C1			41
-#define IRQ_U300_RTC			42
-#define IRQ_U300_NFIF			43
-#define IRQ_U300_NFIF2			44
+#define IRQ_U300_WDOG			36
+#define IRQ_U300_EVHIST			37
+#define IRQ_U300_MSPRO			38
+#define IRQ_U300_MMCSD_MCIINTR0		39
+#define IRQ_U300_MMCSD_MCIINTR1		40
+#define IRQ_U300_I2C0			41
+#define IRQ_U300_I2C1			42
+#define IRQ_U300_RTC			43
+#define IRQ_U300_NFIF			44
+#define IRQ_U300_NFIF2			45
 #endif
 
 /* DB3150 and DB3200 have only 45 IRQs */
 #if defined(CONFIG_MACH_U300_BS2X) || defined(CONFIG_MACH_U300_BS330)
-#define U300_VIC_IRQS_END		45
+#define U300_VIC_IRQS_END		46
 #endif
 
 /* The DB3350-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS335
-#define IRQ_U300_ISP_F0			45
-#define IRQ_U300_ISP_F1			46
-#define IRQ_U300_ISP_F2			47
-#define IRQ_U300_ISP_F3			48
-#define IRQ_U300_ISP_F4			49
-#define IRQ_U300_GPIO_PORT3		50
-#define IRQ_U300_SYSCON_PLL_LOCK	51
-#define IRQ_U300_UART1			52
-#define IRQ_U300_GPIO_PORT4		53
-#define IRQ_U300_GPIO_PORT5		54
-#define IRQ_U300_GPIO_PORT6		55
-#define U300_VIC_IRQS_END		56
+#define IRQ_U300_ISP_F0			46
+#define IRQ_U300_ISP_F1			47
+#define IRQ_U300_ISP_F2			48
+#define IRQ_U300_ISP_F3			49
+#define IRQ_U300_ISP_F4			50
+#define IRQ_U300_GPIO_PORT3		51
+#define IRQ_U300_SYSCON_PLL_LOCK	52
+#define IRQ_U300_UART1			53
+#define IRQ_U300_GPIO_PORT4		54
+#define IRQ_U300_GPIO_PORT5		55
+#define IRQ_U300_GPIO_PORT6		56
+#define U300_VIC_IRQS_END		57
 #endif
 
 /* The DB3210-specific interrupt lines */
 #ifdef CONFIG_MACH_U300_BS365
-#define IRQ_U300_GPIO_PORT3		35
-#define IRQ_U300_GPIO_PORT4		36
-#define IRQ_U300_WDOG			37
-#define IRQ_U300_EVHIST			38
-#define IRQ_U300_MSPRO			39
-#define IRQ_U300_MMCSD_MCIINTR0		40
-#define IRQ_U300_MMCSD_MCIINTR1		41
-#define IRQ_U300_I2C0			42
-#define IRQ_U300_I2C1			43
-#define IRQ_U300_RTC			44
-#define IRQ_U300_NFIF			45
-#define IRQ_U300_NFIF2			46
-#define IRQ_U300_SYSCON_PLL_LOCK	47
-#define U300_VIC_IRQS_END		48
+#define IRQ_U300_GPIO_PORT3		36
+#define IRQ_U300_GPIO_PORT4		37
+#define IRQ_U300_WDOG			38
+#define IRQ_U300_EVHIST			39
+#define IRQ_U300_MSPRO			40
+#define IRQ_U300_MMCSD_MCIINTR0		41
+#define IRQ_U300_MMCSD_MCIINTR1		42
+#define IRQ_U300_I2C0			43
+#define IRQ_U300_I2C1			44
+#define IRQ_U300_RTC			45
+#define IRQ_U300_NFIF			46
+#define IRQ_U300_NFIF2			47
+#define IRQ_U300_SYSCON_PLL_LOCK	48
+#define U300_VIC_IRQS_END		49
 #endif
 
 /* Maximum 8*7 GPIO lines */
@@ -117,6 +117,6 @@
 #define IRQ_U300_GPIO_END		(U300_VIC_IRQS_END)
 #endif
 
-#define NR_IRQS				(IRQ_U300_GPIO_END)
+#define NR_IRQS				(IRQ_U300_GPIO_END - IRQ_U300_INTCON0_START)
 
 #endif
diff --git a/arch/arm/mach-ux500/mbox-db5500.c b/arch/arm/mach-ux500/mbox-db5500.c
index 2b2d51caf9d8..0127490218cd 100644
--- a/arch/arm/mach-ux500/mbox-db5500.c
+++ b/arch/arm/mach-ux500/mbox-db5500.c
@@ -168,7 +168,7 @@ static ssize_t mbox_read_fifo(struct device *dev,
 	return sprintf(buf, "0x%X\n", mbox_value);
 }
 
-static DEVICE_ATTR(fifo, S_IWUGO | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
+static DEVICE_ATTR(fifo, S_IWUSR | S_IRUGO, mbox_read_fifo, mbox_write_fifo);
 
 static int mbox_show(struct seq_file *s, void *data)
 {
diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S
index ff1f7cc11f87..80741992a9fc 100644
--- a/arch/arm/mm/abort-ev6.S
+++ b/arch/arm/mm/abort-ev6.S
@@ -26,18 +26,23 @@ ENTRY(v6_early_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
 /*
- * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR (erratum 326103).
- * The test below covers all the write situations, including Java bytecodes
+ * Faulty SWP instruction on 1136 doesn't set bit 11 in DFSR.
  */
-	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
+#ifdef CONFIG_ARM_ERRATA_326103
+	ldr	ip, =0x4107b36
+	mrc	p15, 0, r3, c0, c0, 0		@ get processor id
+	teq	ip, r3, lsr #4			@ r0 ARM1136?
+	bne	do_DataAbort
 	tst	r5, #PSR_J_BIT			@ Java?
+	tsteq	r5, #PSR_T_BIT			@ Thumb?
 	bne	do_DataAbort
-	do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3
-	ldreq	r3, [r4]			@ read aborted ARM instruction
+	bic	r1, r1, #1 << 11		@ clear bit 11 of FSR
+	ldr	r3, [r4]			@ read aborted ARM instruction
 #ifdef CONFIG_CPU_ENDIAN_BE8
-	reveq	r3, r3
+	rev	r3, r3
 #endif
 	do_ldrd_abort tmp=ip, insn=r3
 	tst	r3, #1 << 20			@ L = 0 -> write
 	orreq	r1, r1, #1 << 11		@ yes.
+#endif
 	b	do_DataAbort
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index a53fd2aaa2f4..2a8e380501e8 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -32,6 +32,7 @@ static void __iomem *l2x0_base;
 static DEFINE_RAW_SPINLOCK(l2x0_lock);
 static u32 l2x0_way_mask;	/* Bitmask of active ways */
 static u32 l2x0_size;
+static unsigned long sync_reg_offset = L2X0_CACHE_SYNC;
 
 struct l2x0_regs l2x0_saved_regs;
 
@@ -61,12 +62,7 @@ static inline void cache_sync(void)
 {
 	void __iomem *base = l2x0_base;
 
-#ifdef CONFIG_PL310_ERRATA_753970
-	/* write to an unmmapped register */
-	writel_relaxed(0, base + L2X0_DUMMY_REG);
-#else
-	writel_relaxed(0, base + L2X0_CACHE_SYNC);
-#endif
+	writel_relaxed(0, base + sync_reg_offset);
 	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
@@ -85,10 +81,13 @@ static inline void l2x0_inv_line(unsigned long addr)
 }
 
 #if defined(CONFIG_PL310_ERRATA_588369) || defined(CONFIG_PL310_ERRATA_727915)
+static inline void debug_writel(unsigned long val)
+{
+	if (outer_cache.set_debug)
+		outer_cache.set_debug(val);
+}
 
-#define debug_writel(val)	outer_cache.set_debug(val)
-
-static void l2x0_set_debug(unsigned long val)
+static void pl310_set_debug(unsigned long val)
 {
 	writel_relaxed(val, l2x0_base + L2X0_DEBUG_CTRL);
 }
@@ -98,7 +97,7 @@ static inline void debug_writel(unsigned long val)
 {
 }
 
-#define l2x0_set_debug	NULL
+#define pl310_set_debug	NULL
 #endif
 
 #ifdef CONFIG_PL310_ERRATA_588369
@@ -331,6 +330,11 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 		else
 			ways = 8;
 		type = "L310";
+#ifdef CONFIG_PL310_ERRATA_753970
+		/* Unmapped register. */
+		sync_reg_offset = L2X0_DUMMY_REG;
+#endif
+		outer_cache.set_debug = pl310_set_debug;
 		break;
 	case L2X0_CACHE_ID_PART_L210:
 		ways = (aux >> 13) & 0xf;
@@ -379,7 +383,6 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask)
 	outer_cache.flush_all = l2x0_flush_all;
 	outer_cache.inv_all = l2x0_inv_all;
 	outer_cache.disable = l2x0_disable;
-	outer_cache.set_debug = l2x0_set_debug;
 
 	printk(KERN_INFO "%s cache controller enabled\n", type);
 	printk(KERN_INFO "l2x0: %d ways, CACHE_ID 0x%08x, AUX_CTRL 0x%08x, Cache size: %d B\n",
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 595079fa9d1d..8f5813bbffb5 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -293,11 +293,11 @@ EXPORT_SYMBOL(pfn_valid);
 #endif
 
 #ifndef CONFIG_SPARSEMEM
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
 {
 }
 #else
-static void arm_memory_present(void)
+static void __init arm_memory_present(void)
 {
 	struct memblock_region *reg;
 
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index b86f8933ff91..2c7cf2f9c837 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -618,8 +618,8 @@ static void __init alloc_init_section(pud_t *pud, unsigned long addr,
 	}
 }
 
-static void alloc_init_pud(pgd_t *pgd, unsigned long addr, unsigned long end,
-	unsigned long phys, const struct mem_type *type)
+static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
+	unsigned long end, unsigned long phys, const struct mem_type *type)
 {
 	pud_t *pud = pud_offset(pgd, addr);
 	unsigned long next;
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index ecdb3da0dea9..c58d896cd5c3 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -916,6 +916,13 @@ void omap_start_dma(int lch)
 			l |= OMAP_DMA_CCR_BUFFERING_DISABLE;
 	l |= OMAP_DMA_CCR_EN;
 
+	/*
+	 * As dma_write() uses IO accessors which are weakly ordered, there
+	 * is no guarantee that data in coherent DMA memory will be visible
+	 * to the DMA device.  Add a memory barrier here to ensure that any
+	 * such data is visible prior to enabling DMA.
+	 */
+	mb();
 	p->dma_write(l, CCR, lch);
 
 	dma_chan[lch].flags |= OMAP_DMA_ACTIVE;
@@ -965,6 +972,13 @@ void omap_stop_dma(int lch)
 		p->dma_write(l, CCR, lch);
 	}
 
+	/*
+	 * Ensure that data transferred by DMA is visible to any access
+	 * after DMA has been disabled.  This is important for coherent
+	 * DMA regions.
+	 */
+	mb();
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
 		char dma_chan_link_map[dma_lch_count];
diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h
index 317e246ffc56..e834c5ef437c 100644
--- a/arch/arm/plat-samsung/include/plat/sdhci.h
+++ b/arch/arm/plat-samsung/include/plat/sdhci.h
@@ -18,6 +18,8 @@
 #ifndef __PLAT_S3C_SDHCI_H
 #define __PLAT_S3C_SDHCI_H __FILE__
 
+#include <plat/devs.h>
+
 struct platform_device;
 struct mmc_host;
 struct mmc_card;
@@ -356,4 +358,30 @@ static inline void exynos4_default_sdhci3(void) { }
 
 #endif /* CONFIG_EXYNOS4_SETUP_SDHCI */
 
+static inline void s3c_sdhci_setname(int id, char *name)
+{
+	switch (id) {
+#ifdef CONFIG_S3C_DEV_HSMMC
+	case 0:
+		s3c_device_hsmmc0.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC1
+	case 1:
+		s3c_device_hsmmc1.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC2
+	case 2:
+		s3c_device_hsmmc2.name = name;
+		break;
+#endif
+#ifdef CONFIG_S3C_DEV_HSMMC3
+	case 3:
+		s3c_device_hsmmc3.name = name;
+		break;
+#endif
+	}
+}
+
 #endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 858748eaa144..bc683b8219b5 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -17,6 +17,8 @@
 #include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/init.h>
+#include <linux/uaccess.h>
+#include <linux/user.h>
 
 #include <asm/cp15.h>
 #include <asm/cputype.h>
@@ -529,6 +531,103 @@ void vfp_flush_hwstate(struct thread_info *thread)
 }
 
 /*
+ * Save the current VFP state into the provided structures and prepare
+ * for entry into a new function (signal handler).
+ */
+int vfp_preserve_user_clear_hwstate(struct user_vfp __user *ufp,
+				    struct user_vfp_exc __user *ufp_exc)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+	int err = 0;
+
+	/* Ensure that the saved hwstate is up-to-date. */
+	vfp_sync_hwstate(thread);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_to_user(&ufp->fpregs, &hwstate->fpregs,
+			      sizeof(hwstate->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__put_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+	/*
+	 * Copy the exception registers.
+	 */
+	__put_user_error(hwstate->fpexc, &ufp_exc->fpexc, err);
+	__put_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+	__put_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+	if (err)
+		return -EFAULT;
+
+	/* Ensure that VFP is disabled. */
+	vfp_flush_hwstate(thread);
+
+	/*
+	 * As per the PCS, clear the length and stride bits for function
+	 * entry.
+	 */
+	hwstate->fpscr &= ~(FPSCR_LENGTH_MASK | FPSCR_STRIDE_MASK);
+
+	/*
+	 * Disable VFP in the hwstate so that we can detect if it gets
+	 * used.
+	 */
+	hwstate->fpexc &= ~FPEXC_EN;
+	return 0;
+}
+
+/* Sanitise and restore the current VFP state from the provided structures. */
+int vfp_restore_user_hwstate(struct user_vfp __user *ufp,
+			     struct user_vfp_exc __user *ufp_exc)
+{
+	struct thread_info *thread = current_thread_info();
+	struct vfp_hard_struct *hwstate = &thread->vfpstate.hard;
+	unsigned long fpexc;
+	int err = 0;
+
+	/*
+	 * If VFP has been used, then disable it to avoid corrupting
+	 * the new thread state.
+	 */
+	if (hwstate->fpexc & FPEXC_EN)
+		vfp_flush_hwstate(thread);
+
+	/*
+	 * Copy the floating point registers. There can be unused
+	 * registers see asm/hwcap.h for details.
+	 */
+	err |= __copy_from_user(&hwstate->fpregs, &ufp->fpregs,
+				sizeof(hwstate->fpregs));
+	/*
+	 * Copy the status and control register.
+	 */
+	__get_user_error(hwstate->fpscr, &ufp->fpscr, err);
+
+	/*
+	 * Sanitise and restore the exception registers.
+	 */
+	__get_user_error(fpexc, &ufp_exc->fpexc, err);
+
+	/* Ensure the VFP is enabled. */
+	fpexc |= FPEXC_EN;
+
+	/* Ensure FPINST2 is invalid and the exception flag is cleared. */
+	fpexc &= ~(FPEXC_EX | FPEXC_FP2V);
+	hwstate->fpexc = fpexc;
+
+	__get_user_error(hwstate->fpinst, &ufp_exc->fpinst, err);
+	__get_user_error(hwstate->fpinst2, &ufp_exc->fpinst2, err);
+
+	return err ? -EFAULT : 0;
+}
+
+/*
  * VFP hardware can lose all context when a CPU goes offline.
  * As we will be running in SMP mode with CPU hotplug, we will save the
  * hardware state at every thread switch.  We clear our held state when