Merge tag 'samsung-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc

Merge "Samsung clock updates for 3.16" from Kukjin Kim:

In this time, it is having dependency with arch/arm/ for 3.16,
I pulled them into samsung tree from Tomasz under agreement from Mike.

- Pull for_3.16/exynos5260 from Tomasz Figa:

  "This pull request contains patches preparing Samsung Common Clock Framework
  helpers to support Exynos5260 by adding support for multiple clock providers
  and then adding clock driver for Exynos5260."

- Pull for_3.16/clk_fixes_non_critical from Tomasz Figa:

  "This pull requests contains a number of non-critical fixes for Samsung clock
  framework and drivers, including:
  1) a series of fixes for Exynos5420 to correct clock definitions and make the
  driver closer to the documentation,
  2) several missing clocks and clock IDs added to Exynos4, Exynos5250 and
  Exynos5420 drivers,
  3) fix for incorrect initialization of clock table with NULL,
  4) compiler warning fix."

- Pull for_3.16/clk_cleanup from Tomasz Figa:

  "This pull requests contains minor clean-up related to Samsung clock
  support, including:
  1) move Kconfig entries of Samsung clock drivers to drivers/clk,
  2) compile drivers/clk/samsung conditionally when COMMON_CLK_SAMSUNG is
  selected,
  3) remove obsolete Kconfig lines after moving s3c24xx to CCF."

- Pull for_3.16/exynos3250 from Tomasz Figa:

  "This small pull request contains a patch adding clock driver for Exynos3250,
  which depends on previous pull requests in this series."

- add dt bindings for exynos3250 clock
- add exynos5800 specific clocks in current exynos5420 clock

Note that this branch is based on s3c24xx ccf branch

* tag 'samsung-clk' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (59 commits)
  clk: exynos5420: Add 5800 specific clocks
  dt-bindings: add documentation for Exynos3250 clock controller
  ARM: S3C24XX: fix merge conflict
  clk: samsung: exynos3250: Add clocks using common clock framework
  drivers: clk: use COMMON_CLK_SAMSUNG for Samsung clock support
  ARM: S3C24XX: move S3C24XX clock Kconfig options to Samsung clock Kconfig file
  ARM: select COMMON_CLK_SAMSUNG for ARCH_EXYNOS and ARCH_S3C64XX
  clk: samsung: add new Kconfig for Samsung common clock option
  ARM: S3C24XX: Remove omitted Kconfig selects and conditionals
  clk: samsung: exynos5420: add more registers to restore list
  clk: samsung: exynos5420: add misc clocks
  clk: samsung: exynos5420: update clocks for MAU Block
  clk: samsung: exynos5420: fix register offset for sclk_bpll
  clk: samsung: exynos5420: correct sysmmu-mfc parent clocks
  clk: samsung: exynos5420: update clocks for FSYS and FSYS2 blocks
  clk: samsung: exynos5420: update clocks for WCORE block
  clk: samsung: exynos5420: update clocks for PERIS and GEN blocks
  clk: samsung: exynos5420: update clocks for PERIC block
  clk: samsung: exynos5420: update clocks for DISP1 block
  clk: samsung: exynos5420: update clocks for G2D and G3D blocks
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

49 files changed, 334 insertions, 3233 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 3bf70415542e..8071171b149a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -754,7 +754,7 @@ config ARCH_S3C64XX
 	select ATAGS
 	select CLKDEV_LOOKUP
 	select CLKSRC_SAMSUNG_PWM
-	select COMMON_CLK
+	select COMMON_CLK_SAMSUNG
 	select CPU_V6K
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
@@ -835,7 +835,7 @@ config ARCH_EXYNOS
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_SPARSEMEM_ENABLE
 	select ARM_GIC
-	select COMMON_CLK
+	select COMMON_CLK_SAMSUNG
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select HAVE_S3C2410_I2C if I2C
diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
index 00d541a1a3d4..3c530722e8dc 100644
--- a/arch/arm/boot/dts/exynos5420.dtsi
+++ b/arch/arm/boot/dts/exynos5420.dtsi
@@ -594,7 +594,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c4_hs_bus>;
-		clocks = <&clock CLK_I2C4>;
+		clocks = <&clock CLK_USI0>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -607,7 +607,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c5_hs_bus>;
-		clocks = <&clock CLK_I2C5>;
+		clocks = <&clock CLK_USI1>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -620,7 +620,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c6_hs_bus>;
-		clocks = <&clock CLK_I2C6>;
+		clocks = <&clock CLK_USI2>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -633,7 +633,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c7_hs_bus>;
-		clocks = <&clock CLK_I2C7>;
+		clocks = <&clock CLK_USI3>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -646,7 +646,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c8_hs_bus>;
-		clocks = <&clock CLK_I2C8>;
+		clocks = <&clock CLK_USI4>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -659,7 +659,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c9_hs_bus>;
-		clocks = <&clock CLK_I2C9>;
+		clocks = <&clock CLK_USI5>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
@@ -672,7 +672,7 @@
 		#size-cells = <0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&i2c10_hs_bus>;
-		clocks = <&clock CLK_I2C10>;
+		clocks = <&clock CLK_USI6>;
 		clock-names = "hsi2c";
 		status = "disabled";
 	};
diff --git a/arch/arm/boot/dts/s3c2416-smdk2416.dts b/arch/arm/boot/dts/s3c2416-smdk2416.dts
index 59594cf15998..ea92fd69529a 100644
--- a/arch/arm/boot/dts/s3c2416-smdk2416.dts
+++ b/arch/arm/boot/dts/s3c2416-smdk2416.dts
@@ -19,6 +19,19 @@
 		reg =  <0x30000000 0x4000000>;
 	};
 
+	clocks {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		xti: xti {
+			compatible = "fixed-clock";
+			clock-frequency = <12000000>;
+			clock-output-names = "xti";
+			#clock-cells = <0>;
+		};
+	};
+
 	serial@50000000 {
 		status = "okay";
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi
index e6555bdd81b8..955e4a4f8c31 100644
--- a/arch/arm/boot/dts/s3c2416.dtsi
+++ b/arch/arm/boot/dts/s3c2416.dtsi
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <dt-bindings/clock/s3c2443.h>
 #include "s3c24xx.dtsi"
 #include "s3c2416-pinctrl.dtsi"
 
@@ -28,26 +29,53 @@
 		compatible = "samsung,s3c2416-irq";
 	};
 
+	clocks: clock-controller@0x4c000000 {
+		compatible = "samsung,s3c2416-clock";
+		reg = <0x4c000000 0x40>;
+		#clock-cells = <1>;
+	};
+
 	pinctrl@56000000 {
 		compatible = "samsung,s3c2416-pinctrl";
 	};
 
+	timer@51000000 {
+		clocks = <&clocks PCLK_PWM>;
+		clock-names = "timers";
+	};
+
 	serial@50000000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART0>, <&clocks PCLK_UART0>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@50004000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@50008000 {
 		compatible = "samsung,s3c2440-uart";
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART2>, <&clocks PCLK_UART2>,
+				<&clocks SCLK_UART>;
 	};
 
 	serial@5000C000 {
 		compatible = "samsung,s3c2440-uart";
 		reg = <0x5000C000 0x4000>;
 		interrupts = <1 18 24 4>, <1 18 25 4>;
+		clock-names = "uart", "clk_uart_baud2",
+				"clk_uart_baud3";
+		clocks = <&clocks PCLK_UART3>, <&clocks PCLK_UART3>,
+				<&clocks SCLK_UART>;
 		status = "disabled";
 	};
 
@@ -55,6 +83,10 @@
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4AC00000 0x100>;
 		interrupts = <0 0 21 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC0>, <&clocks HCLK_HSMMC0>,
+				<&clocks MUX_HSMMC0>;
 		status = "disabled";
 	};
 
@@ -62,18 +94,28 @@
 		compatible = "samsung,s3c6410-sdhci";
 		reg = <0x4A800000 0x100>;
 		interrupts = <0 0 20 3>;
+		clock-names = "hsmmc", "mmc_busclk.0",
+				"mmc_busclk.2";
+		clocks = <&clocks HCLK_HSMMC1>, <&clocks HCLK_HSMMC1>,
+				<&clocks MUX_HSMMC1>;
 		status = "disabled";
 	};
 
 	watchdog@53000000 {
 		interrupts = <1 9 27 3>;
+		clocks = <&clocks PCLK_WDT>;
+		clock-names = "watchdog";
 	};
 
 	rtc@57000000 {
 		compatible = "samsung,s3c2416-rtc";
+		clocks = <&clocks PCLK_RTC>;
+		clock-names = "rtc";
 	};
 
 	i2c@54000000 {
 		compatible = "samsung,s3c2440-i2c";
+		clocks = <&clocks PCLK_I2C0>;
+		clock-names = "i2c";
 	};
 };
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 40cf50b9940c..1e52b6926374 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -18,6 +18,8 @@ config PLAT_S3C24XX
 	help
 	  Base platform code for any Samsung S3C24XX device
 
+
+
 menu "SAMSUNG S3C24XX SoCs Support"
 
 comment "S3C24XX SoCs"
@@ -27,7 +29,7 @@ config CPU_S3C2410
 	default y
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2410
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
@@ -40,6 +42,7 @@ config CPU_S3C2412
 	bool "SAMSUNG S3C2412"
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
+	select S3C2412_COMMON_CLK
 	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
 	help
@@ -50,9 +53,8 @@ config CPU_S3C2416
 	select CPU_ARM926T
 	select CPU_LLSERIAL_S3C2440
 	select S3C2416_PM if PM
-	select S3C2443_COMMON
+	select S3C2443_COMMON_CLK
 	select S3C2443_DMA if S3C24XX_DMA
-	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -60,7 +62,7 @@ config CPU_S3C2440
 	bool "SAMSUNG S3C2440"
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C24XX_DMA
 	help
@@ -70,7 +72,7 @@ config CPU_S3C2442
 	bool "SAMSUNG S3C2442"
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2410_CLOCK
+	select S3C2410_COMMON_CLK
 	select S3C2410_DMA if S3C24XX_DMA
 	select S3C2410_PM if PM
 	help
@@ -85,25 +87,13 @@ config CPU_S3C2443
 	bool "SAMSUNG S3C2443"
 	select CPU_ARM920T
 	select CPU_LLSERIAL_S3C2440
-	select S3C2443_COMMON
+	select S3C2443_COMMON_CLK
 	select S3C2443_DMA if S3C24XX_DMA
-	select SAMSUNG_CLKSRC
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
 # common code
 
-config S3C2410_CLOCK
-	bool
-	help
-	  Clock code for the S3C2410, and similar processors which
-	  is currently includes the S3C2410, S3C2440, S3C2442.
-
-config S3C24XX_DCLK
-	bool
-	help
-	  Clock code for supporting DCLK/CLKOUT on S3C24XX architectures
-
 config S3C24XX_SMDK
 	bool
 	help
@@ -258,8 +248,8 @@ config ARCH_BAST
 	bool "Simtec Electronics BAST (EB2410ITX)"
 	select ISA
 	select MACH_BAST_IDE
+	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2410_CPUFREQ
-	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_NOR
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
@@ -340,7 +330,7 @@ config MACH_TCT_HAMMER
 config MACH_VR1000
 	bool "Thorcom VR1000"
 	select MACH_BAST_IDE
-	select S3C24XX_DCLK
+	select S3C2410_COMMON_DCLK
 	select S3C24XX_SIMTEC_NOR
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C24XX_SIMTEC_USB
@@ -519,8 +509,8 @@ comment "S3C2440 Boards"
 config MACH_ANUBIS
 	bool "Simtec Electronics ANUBIS"
 	select HAVE_PATA_PLATFORM
+	select S3C2410_COMMON_DCLK
 	select S3C2440_XTAL_12000000
-	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_USB_HOST
 	help
@@ -558,9 +548,9 @@ config MACH_NEXCODER_2440
 
 config MACH_OSIRIS
 	bool "Simtec IM2440D20 (OSIRIS) module"
+	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_12000000
-	select S3C24XX_DCLK
 	select S3C24XX_SIMTEC_PM if PM
 	select S3C_DEV_NAND
 	select S3C_DEV_USB_HOST
@@ -629,9 +619,9 @@ config MACH_RX1950
 	bool "HP iPAQ rx1950"
 	select I2C
 	select PM_H1940 if PM
+	select S3C2410_COMMON_DCLK
 	select S3C2410_IOTIMING if ARM_S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
-	select S3C24XX_DCLK
 	select S3C24XX_PWM
 	select S3C_DEV_NAND
 	help
@@ -641,12 +631,6 @@ endif	# CPU_S3C2442
 
 if CPU_S3C2443 || CPU_S3C2416
 
-config S3C2443_COMMON
-	bool
-	help
-	  Common code for the S3C2443 and similar processors, which includes
-	  the S3C2416 and S3C2450.
-
 config S3C2443_DMA
 	bool
 	help
diff --git a/arch/arm/mach-s3c24xx/Makefile b/arch/arm/mach-s3c24xx/Makefile
index 7f54e5b954ca..2235d0d3b38d 100644
--- a/arch/arm/mach-s3c24xx/Makefile
+++ b/arch/arm/mach-s3c24xx/Makefile
@@ -21,22 +21,22 @@ obj-$(CONFIG_S3C2410_DMA)	+= dma-s3c2410.o
 obj-$(CONFIG_S3C2410_PLL)	+= pll-s3c2410.o
 obj-$(CONFIG_S3C2410_PM)	+= pm-s3c2410.o sleep-s3c2410.o
 
-obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o clock-s3c2412.o
+obj-$(CONFIG_CPU_S3C2412)	+= s3c2412.o
 obj-$(CONFIG_S3C2412_DMA)	+= dma-s3c2412.o
 obj-$(CONFIG_S3C2412_PM)	+= pm-s3c2412.o
 obj-$(CONFIG_S3C2412_PM_SLEEP)	+= sleep-s3c2412.o
 
-obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o clock-s3c2416.o
+obj-$(CONFIG_CPU_S3C2416)	+= s3c2416.o
 obj-$(CONFIG_S3C2416_PM)	+= pm-s3c2416.o
 
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o clock-s3c2440.o
+obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o
 obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o clock-s3c244x.o
+obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
 obj-$(CONFIG_S3C2440_DMA)	+= dma-s3c2440.o
 obj-$(CONFIG_S3C2440_PLL_12000000) += pll-s3c2440-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += pll-s3c2440-16934400.o
 
-obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o clock-s3c2443.o
+obj-$(CONFIG_CPU_S3C2443)	+= s3c2443.o
 
 # PM
 
@@ -44,16 +44,13 @@ obj-$(CONFIG_PM)		+= pm.o irq-pm.o sleep.o
 
 # common code
 
-obj-$(CONFIG_S3C24XX_DCLK)	+= clock-dclk.o
 obj-$(CONFIG_S3C24XX_DMA)	+= dma.o
 
-obj-$(CONFIG_S3C2410_CLOCK)	+= clock-s3c2410.o
 obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += cpufreq-utils.o
 
 obj-$(CONFIG_S3C2410_IOTIMING)	+= iotiming-s3c2410.o
 obj-$(CONFIG_S3C2412_IOTIMING)	+= iotiming-s3c2412.o
 
-obj-$(CONFIG_S3C2443_COMMON)	+= common-s3c2443.o
 obj-$(CONFIG_S3C2443_DMA)	+= dma-s3c2443.o
 
 #
diff --git a/arch/arm/mach-s3c24xx/clock-dclk.c b/arch/arm/mach-s3c24xx/clock-dclk.c
deleted file mode 100644
index 1edd9b2369c5..000000000000
--- a/arch/arm/mach-s3c24xx/clock-dclk.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * Copyright (c) 2004-2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *	http://armlinux.simtec.co.uk/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * S3C24XX - definitions for DCLK and CLKOUT registers
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* clocks that could be registered by external code */
-
-static int s3c24xx_dclk_enable(struct clk *clk, int enable)
-{
-	unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (enable)
-		dclkcon |= clk->ctrlbit;
-	else
-		dclkcon &= ~clk->ctrlbit;
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-
-static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long dclkcon;
-	unsigned int uclk;
-
-	if (parent == &clk_upll)
-		uclk = 1;
-	else if (parent == &clk_p)
-		uclk = 0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	dclkcon = __raw_readl(S3C24XX_DCLKCON);
-
-	if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK;
-	} else {
-		if (uclk)
-			dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK;
-		else
-			dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK;
-	}
-
-	__raw_writel(dclkcon, S3C24XX_DCLKCON);
-
-	return 0;
-}
-static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate)
-{
-	unsigned long div;
-
-	if ((rate == 0) || !clk->parent)
-		return 0;
-
-	div = clk_get_rate(clk->parent) / rate;
-	if (div < 2)
-		div = 2;
-	else if (div > 16)
-		div = 16;
-
-	return div;
-}
-
-static unsigned long s3c24xx_round_dclk_rate(struct clk *clk,
-	unsigned long rate)
-{
-	unsigned long div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return 0;
-
-	return clk_get_rate(clk->parent) / div;
-}
-
-static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate)
-{
-	unsigned long mask, data, div = s3c24xx_calc_div(clk, rate);
-
-	if (div == 0)
-		return -EINVAL;
-
-	if (clk == &s3c24xx_dclk0) {
-		mask = S3C2410_DCLKCON_DCLK0_DIV_MASK |
-			S3C2410_DCLKCON_DCLK0_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK0_DIV(div) |
-			S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2);
-	} else if (clk == &s3c24xx_dclk1) {
-		mask = S3C2410_DCLKCON_DCLK1_DIV_MASK |
-			S3C2410_DCLKCON_DCLK1_CMP_MASK;
-		data = S3C2410_DCLKCON_DCLK1_DIV(div) |
-			S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2);
-	} else
-		return -EINVAL;
-
-	clk->rate = clk_get_rate(clk->parent) / div;
-	__raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data),
-		S3C24XX_DCLKCON);
-	return clk->rate;
-}
-static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent)
-{
-	unsigned long mask;
-	unsigned long source;
-
-	/* calculate the MISCCR setting for the clock */
-
-	if (parent == &clk_mpll)
-		source = S3C2410_MISCCR_CLK0_MPLL;
-	else if (parent == &clk_upll)
-		source = S3C2410_MISCCR_CLK0_UPLL;
-	else if (parent == &clk_f)
-		source = S3C2410_MISCCR_CLK0_FCLK;
-	else if (parent == &clk_h)
-		source = S3C2410_MISCCR_CLK0_HCLK;
-	else if (parent == &clk_p)
-		source = S3C2410_MISCCR_CLK0_PCLK;
-	else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1)
-		source = S3C2410_MISCCR_CLK0_DCLK0;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	if (clk == &s3c24xx_clkout0)
-		mask = S3C2410_MISCCR_CLK0_MASK;
-	else {
-		source <<= 4;
-		mask = S3C2410_MISCCR_CLK1_MASK;
-	}
-
-	s3c2410_modify_misccr(mask, source);
-	return 0;
-}
-
-/* external clock definitions */
-
-static struct clk_ops dclk_ops = {
-	.set_parent	= s3c24xx_dclk_setparent,
-	.set_rate	= s3c24xx_set_dclk_rate,
-	.round_rate	= s3c24xx_round_dclk_rate,
-};
-
-struct clk s3c24xx_dclk0 = {
-	.name		= "dclk0",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK0EN,
-	.enable	        = s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-struct clk s3c24xx_dclk1 = {
-	.name		= "dclk1",
-	.ctrlbit	= S3C2410_DCLKCON_DCLK1EN,
-	.enable		= s3c24xx_dclk_enable,
-	.ops		= &dclk_ops,
-};
-
-static struct clk_ops clkout_ops = {
-	.set_parent	= s3c24xx_clkout_setparent,
-};
-
-struct clk s3c24xx_clkout0 = {
-	.name		= "clkout0",
-	.ops		= &clkout_ops,
-};
-
-struct clk s3c24xx_clkout1 = {
-	.name		= "clkout1",
-	.ops		= &clkout_ops,
-};
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2410.c b/arch/arm/mach-s3c24xx/clock-s3c2410.c
deleted file mode 100644
index d1afcf9252d1..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2410.c
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2410,S3C2440,S3C2442 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-int s3c2410_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	/* ensure none of the special function bits set */
-	clkcon &= ~(S3C2410_CLKCON_IDLE|S3C2410_CLKCON_POWER);
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2410_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long orig = clkslow;
-
-	if (enable)
-		clkslow &= ~S3C2410_CLKSLOW_UCLK_OFF;
-	else
-		clkslow |= S3C2410_CLKSLOW_UCLK_OFF;
-
-	__raw_writel(clkslow, S3C2410_CLKSLOW);
-
-	/* if we started the UPLL, then allow to settle */
-
-	if (enable && (orig & S3C2410_CLKSLOW_UCLK_OFF))
-		udelay(200);
-
-	return 0;
-}
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2410_clkcon_enable,
-		.ctrlbit	= S3C2410_CLKCON_SPI,
-	}
-};
-
-static struct clk clk_lcd = {
-	.name		= "lcd",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_LCDC,
-};
-
-static struct clk clk_gpio = {
-	.name		= "gpio",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_GPIO,
-};
-
-static struct clk clk_usb_host = {
-	.name		= "usb-host",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBH,
-};
-
-static struct clk clk_usb_device = {
-	.name		= "usb-device",
-	.parent		= &clk_h,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_USBD,
-};
-
-static struct clk clk_timers = {
-	.name		= "timers",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_PWMT,
-};
-
-struct clk s3c24xx_clk_uart0 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.0",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART0,
-};
-
-struct clk s3c24xx_clk_uart1 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.1",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART1,
-};
-
-struct clk s3c24xx_clk_uart2 = {
-	.name		= "uart",
-	.devname	= "s3c2410-uart.2",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_UART2,
-};
-
-static struct clk clk_rtc = {
-	.name		= "rtc",
-	.parent		= &clk_p,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2410_CLKCON_RTC,
-};
-
-static struct clk clk_watchdog = {
-	.name		= "watchdog",
-	.parent		= &clk_p,
-	.ctrlbit	= 0,
-};
-
-static struct clk clk_usb_bus_host = {
-	.name		= "usb-bus-host",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk clk_usb_bus_gadget = {
-	.name		= "usb-bus-gadget",
-	.parent		= &clk_usb_bus,
-};
-
-static struct clk *init_clocks[] = {
-	&clk_lcd,
-	&clk_gpio,
-	&clk_usb_host,
-	&clk_usb_device,
-	&clk_timers,
-	&s3c24xx_clk_uart0,
-	&s3c24xx_clk_uart1,
-	&s3c24xx_clk_uart2,
-	&clk_rtc,
-	&clk_watchdog,
-	&clk_usb_bus_host,
-	&clk_usb_bus_gadget,
-};
-
-/* s3c2410_baseclk_add()
- *
- * Add all the clocks used by the s3c2410 or compatible CPUs
- * such as the S3C2440 and S3C2442.
- *
- * We cannot use a system device as we are needed before any
- * of the init-calls that initialise the devices are actually
- * done.
-*/
-
-int __init s3c2410_baseclk_add(void)
-{
-	unsigned long clkslow = __raw_readl(S3C2410_CLKSLOW);
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	struct clk *xtal;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2410_upll_enable;
-
-	if (s3c24xx_register_clock(&clk_usb_bus) < 0)
-		printk(KERN_ERR "failed to register usb bus clock\n");
-
-	/* register clocks from clock array */
-
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++) {
-		struct clk *clkp = init_clocks[ptr];
-
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-
-	/* show the clock-slow value */
-
-	xtal = clk_get(NULL, "xtal");
-
-	printk("CLOCK: Slow mode (%ld.%ld MHz), %s, MPLL %s, UPLL %s\n",
-	       print_mhz(clk_get_rate(xtal) /
-			 ( 2 * S3C2410_CLKSLOW_GET_SLOWVAL(clkslow))),
-	       (clkslow & S3C2410_CLKSLOW_SLOW) ? "slow" : "fast",
-	       (clkslow & S3C2410_CLKSLOW_MPLL_OFF) ? "off" : "on",
-	       (clkslow & S3C2410_CLKSLOW_UCLK_OFF) ? "off" : "on");
-
-	return 0;
-}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2412.c b/arch/arm/mach-s3c24xx/clock-s3c2412.c
deleted file mode 100644
index 192a5b2550b0..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2412.c
+++ /dev/null
@@ -1,760 +0,0 @@
-/* linux/arch/arm/mach-s3c2412/clock.c
- *
- * Copyright (c) 2006 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2412,S3C2413 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/delay.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-static int s3c2412_clkcon_enable(struct clk *clk, int enable)
-{
-	unsigned int clocks = clk->ctrlbit;
-	unsigned long clkcon;
-
-	clkcon = __raw_readl(S3C2410_CLKCON);
-
-	if (enable)
-		clkcon |= clocks;
-	else
-		clkcon &= ~clocks;
-
-	__raw_writel(clkcon, S3C2410_CLKCON);
-
-	return 0;
-}
-
-static int s3c2412_upll_enable(struct clk *clk, int enable)
-{
-	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
-	unsigned long orig = upllcon;
-
-	if (!enable)
-		upllcon |= S3C2412_PLLCON_OFF;
-	else
-		upllcon &= ~S3C2412_PLLCON_OFF;
-
-	__raw_writel(upllcon, S3C2410_UPLLCON);
-
-	/* allow ~150uS for the PLL to settle and lock */
-
-	if (enable && (orig & S3C2412_PLLCON_OFF))
-		udelay(150);
-
-	return 0;
-}
-
-/* clock selections */
-
-static struct clk clk_erefclk = {
-	.name		= "erefclk",
-};
-
-static struct clk clk_urefclk = {
-	.name		= "urefclk",
-};
-
-static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_urefclk)
-		clksrc &= ~S3C2412_CLKSRC_USYSCLK_UPLL;
-	else if (parent == &clk_upll)
-		clksrc |= S3C2412_CLKSRC_USYSCLK_UPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_usysclk = {
-	.name		= "usysclk",
-	.parent		= &clk_xtal,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_usysclk,
-	},
-};
-
-static struct clk clk_mrefclk = {
-	.name		= "mrefclk",
-	.parent		= &clk_xtal,
-};
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_xtal,
-};
-
-static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_USBCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_USBCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_roundrate_usbsrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-	if (div > 2)
-		div = 2;
-
-	return parent_rate / div;
-}
-
-static unsigned long s3c2412_getrate_usbsrc(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	return parent_rate / ((div & S3C2412_CLKDIVN_USB48DIV) ? 2 : 1);
-}
-
-static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_usbsrc(clk, rate);
-
-	if ((parent_rate / rate) == 2)
-		clkdivn |= S3C2412_CLKDIVN_USB48DIV;
-	else
-		clkdivn &= ~S3C2412_CLKDIVN_USB48DIV;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_usbsrc = {
-	.name		= "usbsrc",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_usbsrc,
-		.set_rate	= s3c2412_setrate_usbsrc,
-		.round_rate	= s3c2412_roundrate_usbsrc,
-		.set_parent	= s3c2412_setparent_usbsrc,
-	},
-};
-
-static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_mdivclk)
-		clksrc &= ~S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_MSYSCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static struct clk clk_msysclk = {
-	.name		= "msysclk",
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_msysclk,
-	},
-};
-
-static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long flags;
-	unsigned long clkdiv;
-	unsigned long dvs;
-
-	/* Note, we current equate fclk andf msysclk for S3C2412 */
-
-	if (parent == &clk_msysclk || parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2412_CLKDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	/* update this under irq lockdown, clkdivn is not protected
-	 * by the clock system. */
-
-	local_irq_save(flags);
-
-	clkdiv  = __raw_readl(S3C2410_CLKDIVN);
-	clkdiv &= ~S3C2412_CLKDIVN_DVSEN;
-	clkdiv |= dvs;
-	__raw_writel(clkdiv, S3C2410_CLKDIVN);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct clk clk_armclk = {
-	.name		= "armclk",
-	.parent		= &clk_msysclk,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2412_setparent_armclk,
-	},
-};
-
-/* these next clocks have an divider immediately after them,
- * so we can register them with their divider and leave out the
- * intermediate clock stage
-*/
-static unsigned long s3c2412_roundrate_clksrc(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations as they cancel out */
-
-	div = (rate / parent_rate);
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / div;
-}
-
-static int s3c2412_setparent_uart(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_UARTCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_UARTCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_uart(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_UARTDIV_MASK;
-	div >>= S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_UARTDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_UARTDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_uart = {
-	.name		= "uartclk",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_uart,
-		.set_rate	= s3c2412_setrate_uart,
-		.set_parent	= s3c2412_setparent_uart,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-static int s3c2412_setparent_i2s(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_erefclk)
-		clksrc &= ~S3C2412_CLKSRC_I2SCLK_MPLL;
-	else if (parent == &clk_mpll)
-		clksrc |= S3C2412_CLKSRC_I2SCLK_MPLL;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-
-static unsigned long s3c2412_getrate_i2s(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_I2SDIV_MASK;
-	div >>= S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_I2SDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_I2SDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_i2s = {
-	.name		= "i2sclk",
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_i2s,
-		.set_rate	= s3c2412_setrate_i2s,
-		.set_parent	= s3c2412_setparent_i2s,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-static int s3c2412_setparent_cam(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-
-	if (parent == &clk_usysclk)
-		clksrc &= ~S3C2412_CLKSRC_CAMCLK_HCLK;
-	else if (parent == &clk_h)
-		clksrc |= S3C2412_CLKSRC_CAMCLK_HCLK;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	__raw_writel(clksrc, S3C2412_CLKSRC);
-	return 0;
-}
-static unsigned long s3c2412_getrate_cam(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2410_CLKDIVN);
-
-	div &= S3C2412_CLKDIVN_CAMDIV_MASK;
-	div >>= S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	return parent_rate / (div + 1);
-}
-
-static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long clkdivn = __raw_readl(S3C2410_CLKDIVN);
-
-	rate = s3c2412_roundrate_clksrc(clk, rate);
-
-	clkdivn &= ~S3C2412_CLKDIVN_CAMDIV_MASK;
-	clkdivn |= ((parent_rate / rate) - 1) << S3C2412_CLKDIVN_CAMDIV_SHIFT;
-
-	__raw_writel(clkdivn, S3C2410_CLKDIVN);
-	return 0;
-}
-
-static struct clk clk_cam = {
-	.name		= "camif-upll",	/* same as 2440 name */
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2412_getrate_cam,
-		.set_rate	= s3c2412_setrate_cam,
-		.set_parent	= s3c2412_setparent_cam,
-		.round_rate	= s3c2412_roundrate_clksrc,
-	},
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "nand",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_NAND,
-	}, {
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SDI,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIC,
-	}, {
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_IIS,
-	}, {
-		.name		= "spi",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_SPI,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma.0",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA0,
-	}, {
-		.name		= "dma.1",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA1,
-	}, {
-		.name		= "dma.2",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA2,
-	}, {
-		.name		= "dma.3",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_DMA3,
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_LCDC,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USBD,
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_PWMT,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2412-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_UART2,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= 0,
-	}, {
-		.name		= "usb-bus-gadget",
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_DEV48,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus,
-		.enable		= s3c2412_clkcon_enable,
-		.ctrlbit	= S3C2412_CLKCON_USB_HOST48,
-	}
-};
-
-/* clocks to add where we need to check their parentage */
-
-struct clk_init {
-	struct clk	*clk;
-	unsigned int	 bit;
-	struct clk	*src_0;
-	struct clk	*src_1;
-};
-
-static struct clk_init clks_src[] __initdata = {
-	{
-		.clk	= &clk_usysclk,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_urefclk,
-		.src_1	= &clk_upll,
-	}, {
-		.clk	= &clk_i2s,
-		.bit	= S3C2412_CLKSRC_I2SCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_cam,
-		.bit	= S3C2412_CLKSRC_CAMCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	}, {
-		.clk	= &clk_msysclk,
-		.bit	= S3C2412_CLKSRC_MSYSCLK_MPLL,
-		.src_0	= &clk_mdivclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_uart,
-		.bit	= S3C2412_CLKSRC_UARTCLK_MPLL,
-		.src_0	= &clk_erefclk,
-		.src_1	= &clk_mpll,
-	}, {
-		.clk	= &clk_usbsrc,
-		.bit	= S3C2412_CLKSRC_USBCLK_HCLK,
-		.src_0	= &clk_usysclk,
-		.src_1	= &clk_h,
-	/* here we assume  OM[4] select xtal */
-	}, {
-		.clk	= &clk_erefclk,
-		.bit	= S3C2412_CLKSRC_EREFCLK_EXTCLK,
-		.src_0	= &clk_xtal,
-		.src_1	= &clk_ext,
-	}, {
-		.clk	= &clk_urefclk,
-		.bit	= S3C2412_CLKSRC_UREFCLK_EXTCLK,
-		.src_0	= &clk_xtal,
-		.src_1	= &clk_ext,
-	},
-};
-
-/* s3c2412_clk_initparents
- *
- * Initialise the parents for the clocks that we get at start-time
-*/
-
-static void __init s3c2412_clk_initparents(void)
-{
-	unsigned long clksrc = __raw_readl(S3C2412_CLKSRC);
-	struct clk_init *cip = clks_src;
-	struct clk *src;
-	int ptr;
-	int ret;
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks_src); ptr++, cip++) {
-		ret = s3c24xx_register_clock(cip->clk);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       cip->clk->name, ret);
-		}
-
-		src = (clksrc & cip->bit) ? cip->src_1 : cip->src_0;
-
-		printk(KERN_INFO "%s: parent %s\n", cip->clk->name, src->name);
-		clk_set_parent(cip->clk, src);
-	}
-}
-
-/* clocks to add straight away */
-
-static struct clk *clks[] __initdata = {
-	&clk_ext,
-	&clk_usb_bus,
-	&clk_mrefclk,
-	&clk_armclk,
-};
-
-static struct clk_lookup s3c2412_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_usysclk),
-};
-
-int __init s3c2412_baseclk_add(void)
-{
-	unsigned long clkcon  = __raw_readl(S3C2410_CLKCON);
-	unsigned int dvs;
-	struct clk *clkp;
-	int ret;
-	int ptr;
-
-	clk_upll.enable = s3c2412_upll_enable;
-	clk_usb_bus.parent = &clk_usbsrc;
-	clk_usb_bus.rate = 0x0;
-
-	clk_f.parent = &clk_msysclk;
-
-	s3c2412_clk_initparents();
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) {
-		clkp = clks[ptr];
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* set the dvs state according to what we got at boot time */
-
-	dvs = __raw_readl(S3C2410_CLKDIVN) & S3C2412_CLKDIVN_DVSEN;
-
-	if (dvs)
-		clk_armclk.parent = &clk_h;
-
-	printk(KERN_INFO "S3C2412: DVS is %s\n", dvs ? "on" : "off");
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB bus clock not at 48MHz\n");
-
-		/* for the moment, let's use the UPLL, and see if we can
-		 * get 48MHz */
-
-		clk_set_parent(&clk_usysclk, &clk_upll);
-		clk_set_parent(&clk_usbsrc, &clk_usysclk);
-		clk_set_rate(&clk_usbsrc, 48*1000*1000);
-	}
-
-	printk("S3C2412: upll %s, %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (__raw_readl(S3C2410_UPLLCON) & S3C2412_PLLCON_OFF) ? "off":"on",
-	       print_mhz(clk_get_rate(&clk_upll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-
-	/* register clocks from clock array */
-
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		/* ensure that we note the clock state */
-
-		clkp->usage = clkcon & clkp->ctrlbit ? 1 : 0;
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
-
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-
-		s3c2412_clkcon_enable(clkp, 0);
-	}
-
-	clkdev_add_table(s3c2412_clk_lookup, ARRAY_SIZE(s3c2412_clk_lookup));
-	return 0;
-}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2416.c b/arch/arm/mach-s3c24xx/clock-s3c2416.c
deleted file mode 100644
index d421a72920a5..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2416.c
+++ /dev/null
@@ -1,171 +0,0 @@
-/* linux/arch/arm/mach-s3c2416/clock.c
- *
- * Copyright (c) 2010 Simtec Electronics
- * Copyright (c) 2010 Ben Dooks <ben-linux@fluff.org>
- *
- * S3C2416 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-#include <plat/pll.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/regs-clock.h>
-#include <mach/regs-s3c2443-clock.h>
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[8] = {
-	[0] = 1,
-	[1] = 2,
-	[2] = 3,
-	[3] = 4,
-	[5] = 6,
-	[7] = 8,
-};
-
-static struct clksrc_clk hsspi_eplldiv = {
-	.clk = {
-		.name	= "hsspi-eplldiv",
-		.parent	= &clk_esysclk.clk,
-		.ctrlbit = (1 << 14),
-		.enable = s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 },
-};
-
-static struct clk *hsspi_sources[] = {
-	[0] = &hsspi_eplldiv.clk,
-	[1] = NULL, /* to fix */
-};
-
-static struct clksrc_clk hsspi_mux = {
-	.clk	= {
-		.name	= "hsspi-if",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = hsspi_sources,
-		.nr_sources = ARRAY_SIZE(hsspi_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 },
-};
-
-static struct clksrc_clk hsmmc_div[] = {
-	[0] = {
-		.clk = {
-			.name	= "hsmmc-div",
-			.devname	= "s3c-sdhci.0",
-			.parent	= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 },
-	},
-	[1] = {
-		.clk = {
-			.name	= "hsmmc-div",
-			.devname	= "s3c-sdhci.1",
-			.parent	= &clk_esysclk.clk,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-	},
-};
-
-static struct clksrc_clk hsmmc_mux0 = {
-	.clk	= {
-		.name		= "hsmmc-if",
-		.devname	= "s3c-sdhci.0",
-		.ctrlbit	= (1 << 6),
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.sources	= &(struct clksrc_sources) {
-		.nr_sources	= 2,
-		.sources	= (struct clk * []) {
-			[0]	= &hsmmc_div[0].clk,
-			[1]	= NULL, /* to fix */
-		},
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 16 },
-};
-
-static struct clksrc_clk hsmmc_mux1 = {
-	.clk	= {
-		.name		= "hsmmc-if",
-		.devname	= "s3c-sdhci.1",
-		.ctrlbit	= (1 << 12),
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.sources	= &(struct clksrc_sources) {
-		.nr_sources	= 2,
-		.sources	= (struct clk * []) {
-			[0]	= &hsmmc_div[1].clk,
-			[1]	= NULL, /* to fix */
-		},
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 17 },
-};
-
-static struct clk hsmmc0_clk = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.0",
-	.parent		= &clk_h,
-	.enable		= s3c2443_clkcon_enable_h,
-	.ctrlbit	= S3C2416_HCLKCON_HSMMC0,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&hsspi_eplldiv,
-	&hsspi_mux,
-	&hsmmc_div[0],
-	&hsmmc_div[1],
-	&hsmmc_mux0,
-	&hsmmc_mux1,
-};
-
-static struct clk_lookup s3c2416_clk_lookup[] = {
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.0", &hsmmc0_clk),
-	CLKDEV_INIT("s3c-sdhci.0", "mmc_busclk.2", &hsmmc_mux0.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &hsmmc_mux1.clk),
-	/* s3c2443-spi.0 is used on s3c2416 and s3c2450 as well */
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &hsspi_mux.clk),
-};
-
-void __init s3c2416_init_clocks(int xtal)
-{
-	u32 epllcon = __raw_readl(S3C2443_EPLLCON);
-	u32 epllcon1 = __raw_readl(S3C2443_EPLLCON+4);
-	int ptr;
-
-	/* s3c2416 EPLL compatible with s3c64xx */
-	clk_epll.rate = s3c_get_pll6553x(xtal, epllcon, epllcon1);
-
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c2443_common_init_clocks(xtal, s3c2416_get_pll,
-				   armdiv, ARRAY_SIZE(armdiv),
-				   S3C2416_CLKDIV0_ARMDIV_MASK);
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	s3c24xx_register_clock(&hsmmc0_clk);
-	clkdev_add_table(s3c2416_clk_lookup, ARRAY_SIZE(s3c2416_clk_lookup));
-
-}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c
deleted file mode 100644
index 5527226fd61f..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2440.c
+++ /dev/null
@@ -1,217 +0,0 @@
-/* linux/arch/arm/mach-s3c2440/clock.c
- *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440 Clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/mutex.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/serial_core.h>
-#include <linux/serial_s3c.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-/* S3C2440 extended clock support */
-
-static unsigned long s3c2440_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div = (parent_rate / rate) / 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2440_camif_upll_round(clk, rate);
-
-	camdivn &= ~(S3C2440_CAMDIVN_CAMCLK_SEL | S3C2440_CAMDIVN_CAMCLK_MASK);
-
-	if (rate != parent_rate) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static unsigned long s3c2440_camif_upll_getrate(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	if (!(camdivn & S3C2440_CAMDIVN_CAMCLK_SEL))
-		return parent_rate;
-
-	camdivn &= S3C2440_CAMDIVN_CAMCLK_MASK;
-
-	return parent_rate / (camdivn + 1) / 2;
-}
-
-/* Extra S3C2440 clocks */
-
-static struct clk s3c2440_clk_cam = {
-	.name		= "camif",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2440_clk_cam_upll = {
-	.name		= "camif-upll",
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2440_camif_upll_setrate,
-		.get_rate	= s3c2440_camif_upll_getrate,
-		.round_rate	= s3c2440_camif_upll_round,
-	},
-};
-
-static struct clk s3c2440_clk_ac97 = {
-	.name		= "ac97",
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_AC97,
-};
-
-#define S3C24XX_VA_UART0      (S3C_VA_UART)
-#define S3C24XX_VA_UART1      (S3C_VA_UART + 0x4000 )
-#define S3C24XX_VA_UART2      (S3C_VA_UART + 0x8000 )
-#define S3C24XX_VA_UART3      (S3C_VA_UART + 0xC000 )
-
-static unsigned long  s3c2440_fclk_n_getrate(struct clk *clk)
-{
-	unsigned long ucon0, ucon1, ucon2, divisor;
-
-	/* the fun of calculating the uart divisors on the s3c2440 */
-	ucon0 = __raw_readl(S3C24XX_VA_UART0 + S3C2410_UCON);
-	ucon1 = __raw_readl(S3C24XX_VA_UART1 + S3C2410_UCON);
-	ucon2 = __raw_readl(S3C24XX_VA_UART2 + S3C2410_UCON);
-
-	ucon0 &= S3C2440_UCON0_DIVMASK;
-	ucon1 &= S3C2440_UCON1_DIVMASK;
-	ucon2 &= S3C2440_UCON2_DIVMASK;
-
-	if (ucon0 != 0)
-		divisor = (ucon0 >> S3C2440_UCON_DIVSHIFT) + 6;
-	else if (ucon1 != 0)
-		divisor = (ucon1 >> S3C2440_UCON_DIVSHIFT) + 21;
-	else if (ucon2 != 0)
-		divisor = (ucon2 >> S3C2440_UCON_DIVSHIFT) + 36;
-	else
-		/* manual calims 44, seems to be 9 */
-		divisor = 9;
-
-	return clk_get_rate(clk->parent) / divisor;
-}
-
-static struct clk s3c2440_clk_fclk_n = {
-	.name		= "fclk_n",
-	.parent		= &clk_f,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2440_fclk_n_getrate,
-	},
-};
-
-static struct clk_lookup s3c2440_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &s3c2440_clk_fclk_n),
-	CLKDEV_INIT("s3c2440-uart.0", "uart", &s3c24xx_clk_uart0),
-	CLKDEV_INIT("s3c2440-uart.1", "uart", &s3c24xx_clk_uart1),
-	CLKDEV_INIT("s3c2440-uart.2", "uart", &s3c24xx_clk_uart2),
-	CLKDEV_INIT("s3c2440-camif", "camera", &s3c2440_clk_cam_upll),
-};
-
-static int __init_refok s3c2440_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2440: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2440_clk_cam.parent = clock_h;
-	s3c2440_clk_ac97.parent = clock_p;
-	s3c2440_clk_cam_upll.parent = clock_upll;
-	s3c24xx_register_clock(&s3c2440_clk_fclk_n);
-
-	s3c24xx_register_clock(&s3c2440_clk_ac97);
-	s3c24xx_register_clock(&s3c2440_clk_cam);
-	s3c24xx_register_clock(&s3c2440_clk_cam_upll);
-	clkdev_add_table(s3c2440_clk_lookup, ARRAY_SIZE(s3c2440_clk_lookup));
-
-	clk_disable(&s3c2440_clk_ac97);
-	clk_disable(&s3c2440_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c2440_clk_add,
-};
-
-static __init int s3c24xx_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c24xx_clk_init);
diff --git a/arch/arm/mach-s3c24xx/clock-s3c2443.c b/arch/arm/mach-s3c24xx/clock-s3c2443.c
deleted file mode 100644
index 76cd31f7804e..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c2443.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/* linux/arch/arm/mach-s3c2443/clock.c
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2443 Clock control support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/clk.h>
-#include <linux/mutex.h>
-#include <linux/serial_core.h>
-#include <linux/io.h>
-
-#include <asm/mach/map.h>
-
-#include <mach/hardware.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/cpu-freq.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-/* We currently have to assume that the system is running
- * from the XTPll input, and that all ***REFCLKs are being
- * fed from it, as we cannot read the state of OM[4] from
- * software.
- *
- * It would be possible for each board initialisation to
- * set the correct muxing at initialisation
-*/
-
-/* clock selections */
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
- * The real clock definition is done in s3c2443-clock.c,
- * only the armdiv divisor table must be defined here.
-*/
-
-static unsigned int armdiv[16] = {
-	[S3C2443_CLKDIV0_ARMDIV_1 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 1,
-	[S3C2443_CLKDIV0_ARMDIV_2 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 2,
-	[S3C2443_CLKDIV0_ARMDIV_3 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 3,
-	[S3C2443_CLKDIV0_ARMDIV_4 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 4,
-	[S3C2443_CLKDIV0_ARMDIV_6 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 6,
-	[S3C2443_CLKDIV0_ARMDIV_8 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 8,
-	[S3C2443_CLKDIV0_ARMDIV_12 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 12,
-	[S3C2443_CLKDIV0_ARMDIV_16 >> S3C2443_CLKDIV0_ARMDIV_SHIFT]	= 16,
-};
-
-/* hsspi
- *
- * high-speed spi clock, sourced from esysclk
-*/
-
-static struct clksrc_clk clk_hsspi = {
-	.clk	= {
-		.name		= "hsspi-if",
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_HSSPICLK,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-
-/* clk_hsmcc_div
- *
- * this clock is sourced from epll, and is fed through a divider,
- * to a mux controlled by sclkcon where either it or a extclk can
- * be fed to the hsmmc block
-*/
-
-static struct clksrc_clk clk_hsmmc_div = {
-	.clk	= {
-		.name		= "hsmmc-div",
-		.devname	= "s3c-sdhci.1",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 },
-};
-
-static int s3c2443_setparent_hsmmc(struct clk *clk, struct clk *parent)
-{
-	unsigned long clksrc = __raw_readl(S3C2443_SCLKCON);
-
-	clksrc &= ~(S3C2443_SCLKCON_HSMMCCLK_EXT |
-		    S3C2443_SCLKCON_HSMMCCLK_EPLL);
-
-	if (parent == &clk_epll)
-		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EPLL;
-	else if (parent == &clk_ext)
-		clksrc |= S3C2443_SCLKCON_HSMMCCLK_EXT;
-	else
-		return -EINVAL;
-
-	if (clk->usage > 0) {
-		__raw_writel(clksrc, S3C2443_SCLKCON);
-	}
-
-	clk->parent = parent;
-	return 0;
-}
-
-static int s3c2443_enable_hsmmc(struct clk *clk, int enable)
-{
-	return s3c2443_setparent_hsmmc(clk, clk->parent);
-}
-
-static struct clk clk_hsmmc = {
-	.name		= "hsmmc-if",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_hsmmc_div.clk,
-	.enable		= s3c2443_enable_hsmmc,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2443_setparent_hsmmc,
-	},
-};
-
-/* standard clock definitions */
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "sdi",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SDI,
-	}, {
-		.name		= "spi",
-		.devname	= "s3c2410-spi.0",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_SPI1,
-	}
-};
-
-/* clocks to add straight away */
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_hsspi,
-	&clk_hsmmc_div,
-};
-
-static struct clk *clks[] __initdata = {
-	&clk_hsmmc,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.2", &clk_hsmmc),
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk2", &clk_hsspi.clk),
-};
-
-void __init s3c2443_init_clocks(int xtal)
-{
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	int ptr;
-
-	clk_epll.rate = s3c2443_get_epll(epllcon, xtal);
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c2443_common_init_clocks(xtal, s3c2443_get_mpll,
-				   armdiv, ARRAY_SIZE(armdiv),
-				   S3C2443_CLKDIV0_ARMDIV_MASK);
-
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	/* We must be careful disabling the clocks we are not intending to
-	 * be using at boot time, as subsystems such as the LCD which do
-	 * their own DMA requests to the bus can cause the system to lockup
-	 * if they where in the middle of requesting bus access.
-	 *
-	 * Disabling the LCD clock if the LCD is active is very dangerous,
-	 * and therefore the bootloader should be careful to not enable
-	 * the LCD clock if it is not needed.
-	*/
-
-	/* install (and disable) the clocks we do not need immediately */
-
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-}
diff --git a/arch/arm/mach-s3c24xx/clock-s3c244x.c b/arch/arm/mach-s3c24xx/clock-s3c244x.c
deleted file mode 100644
index 6d9b688c442b..000000000000
--- a/arch/arm/mach-s3c24xx/clock-s3c244x.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
- *
- * Copyright (c) 2004-2008 Simtec Electronics
- *	http://armlinux.simtec.co.uk/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C2440/S3C2442 Common clock support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-#include <linux/atomic.h>
-#include <asm/irq.h>
-
-#include <mach/regs-clock.h>
-
-#include <plat/clock.h>
-#include <plat/cpu.h>
-
-static int s3c2440_setparent_armclk(struct clk *clk, struct clk *parent)
-{
-	unsigned long camdivn;
-	unsigned long dvs;
-
-	if (parent == &clk_f)
-		dvs = 0;
-	else if (parent == &clk_h)
-		dvs = S3C2440_CAMDIVN_DVSEN;
-	else
-		return -EINVAL;
-
-	clk->parent = parent;
-
-	camdivn  = __raw_readl(S3C2440_CAMDIVN);
-	camdivn &= ~S3C2440_CAMDIVN_DVSEN;
-	camdivn |= dvs;
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-static struct clk clk_arm = {
-	.name		= "armclk",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_parent	= s3c2440_setparent_armclk,
-	},
-};
-
-static int s3c244x_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	unsigned long camdivn = __raw_readl(S3C2440_CAMDIVN);
-	unsigned long clkdivn;
-	struct clk *clock_upll;
-	int ret;
-
-	printk("S3C244X: Clock Support, DVS %s\n",
-	       (camdivn & S3C2440_CAMDIVN_DVSEN) ? "on" : "off");
-
-	clk_arm.parent = (camdivn & S3C2440_CAMDIVN_DVSEN) ? &clk_h : &clk_f;
-
-	ret = s3c24xx_register_clock(&clk_arm);
-	if (ret < 0) {
-		printk(KERN_ERR "S3C24XX: Failed to add armclk (%d)\n", ret);
-		return ret;
-	}
-
-	clock_upll = clk_get(NULL, "upll");
-	if (IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C244X: Failed to get upll clock\n");
-		return -ENOENT;
-	}
-
-	/* check rate of UPLL, and if it is near 96MHz, then change
-	 * to using half the UPLL rate for the system */
-
-	if (clk_get_rate(clock_upll) > (94 * MHZ)) {
-		clk_usb_bus.rate = clk_get_rate(clock_upll) / 2;
-
-		spin_lock(&clocks_lock);
-
-		clkdivn = __raw_readl(S3C2410_CLKDIVN);
-		clkdivn |= S3C2440_CLKDIVN_UCLK;
-		__raw_writel(clkdivn, S3C2410_CLKDIVN);
-
-		spin_unlock(&clocks_lock);
-	}
-
-	return 0;
-}
-
-static struct subsys_interface s3c2440_clk_interface = {
-	.name		= "s3c2440_clk",
-	.subsys		= &s3c2440_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2440_clk_init(void)
-{
-	return subsys_interface_register(&s3c2440_clk_interface);
-}
-
-arch_initcall(s3c2440_clk_init);
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c244x_clk_add,
-};
-
-static int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
diff --git a/arch/arm/mach-s3c24xx/common-s3c2443.c b/arch/arm/mach-s3c24xx/common-s3c2443.c
deleted file mode 100644
index 65d3eef73090..000000000000
--- a/arch/arm/mach-s3c24xx/common-s3c2443.c
+++ /dev/null
@@ -1,675 +0,0 @@
-/*
- * Common code for SoCs starting with the S3C2443
- *
- * Copyright (c) 2007, 2010 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-
-#include <mach/regs-s3c2443-clock.h>
-
-#include <plat/clock.h>
-#include <plat/clock-clksrc.h>
-#include <plat/cpu.h>
-
-#include <plat/cpu-freq.h>
-
-
-static int s3c2443_gate(void __iomem *reg, struct clk *clk, int enable)
-{
-	u32 ctrlbit = clk->ctrlbit;
-	u32 con = __raw_readl(reg);
-
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
-
-	__raw_writel(con, reg);
-	return 0;
-}
-
-int s3c2443_clkcon_enable_h(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_HCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_p(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_PCLKCON, clk, enable);
-}
-
-int s3c2443_clkcon_enable_s(struct clk *clk, int enable)
-{
-	return s3c2443_gate(S3C2443_SCLKCON, clk, enable);
-}
-
-/* mpllref is a direct descendant of clk_xtal by default, but it is not
- * elided as the EPLL can be either sourced by the XTAL or EXTCLK and as
- * such directly equating the two source clocks is impossible.
- */
-static struct clk clk_mpllref = {
-	.name		= "mpllref",
-	.parent		= &clk_xtal,
-};
-
-static struct clk *clk_epllref_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpllref,
-	[2] = &clk_xtal,
-	[3] = &clk_ext,
-};
-
-struct clksrc_clk clk_epllref = {
-	.clk	= {
-		.name		= "epllref",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_epllref_sources,
-		.nr_sources = ARRAY_SIZE(clk_epllref_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 7 },
-};
-
-/* esysclk
- *
- * this is sourced from either the EPLL or the EPLLref clock
-*/
-
-static struct clk *clk_sysclk_sources[] = {
-	[0] = &clk_epllref.clk,
-	[1] = &clk_epll,
-};
-
-struct clksrc_clk clk_esysclk = {
-	.clk	= {
-		.name		= "esysclk",
-		.parent		= &clk_epll,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_sysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_sysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 6 },
-};
-
-static unsigned long s3c2443_getrate_mdivclk(struct clk *clk)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long div = __raw_readl(S3C2443_CLKDIV0);
-
-	div  &= S3C2443_CLKDIV0_EXTDIV_MASK;
-	div >>= (S3C2443_CLKDIV0_EXTDIV_SHIFT-1);	/* x2 */
-
-	return parent_rate / (div + 1);
-}
-
-static struct clk clk_mdivclk = {
-	.name		= "mdivclk",
-	.parent		= &clk_mpllref,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_getrate_mdivclk,
-	},
-};
-
-static struct clk *clk_msysclk_sources[] = {
-	[0] = &clk_mpllref,
-	[1] = &clk_mpll,
-	[2] = &clk_mdivclk,
-	[3] = &clk_mpllref,
-};
-
-static struct clksrc_clk clk_msysclk = {
-	.clk	= {
-		.name		= "msysclk",
-		.parent		= &clk_xtal,
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_msysclk_sources,
-		.nr_sources = ARRAY_SIZE(clk_msysclk_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 3 },
-};
-
-/* prediv
- *
- * this divides the msysclk down to pass to h/p/etc.
- */
-
-static unsigned long s3c2443_prediv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_PREDIV_MASK;
-	clkdiv0 >>= S3C2443_CLKDIV0_PREDIV_SHIFT;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk clk_prediv = {
-	.name		= "prediv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.get_rate	= s3c2443_prediv_getrate,
-	},
-};
-
-/* hclk divider
- *
- * divides the prediv and provides the hclk.
- */
-
-static unsigned long s3c2443_hclkdiv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 &= S3C2443_CLKDIV0_HCLKDIV_MASK;
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_h_ops = {
-	.get_rate	= s3c2443_hclkdiv_getrate,
-};
-
-/* pclk divider
- *
- * divides the hclk and provides the pclk.
- */
-
-static unsigned long s3c2443_pclkdiv_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0);
-
-	clkdiv0 = ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 1 : 0);
-
-	return rate / (clkdiv0 + 1);
-}
-
-static struct clk_ops clk_p_ops = {
-	.get_rate	= s3c2443_pclkdiv_getrate,
-};
-
-/* armdiv
- *
- * this clock is sourced from msysclk and can have a number of
- * divider values applied to it to then be fed into armclk.
-*/
-
-static unsigned int *armdiv;
-static int nr_armdiv;
-static int armdivmask;
-
-static unsigned long s3c2443_armclk_roundrate(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned best = 256; /* bigger than any value */
-	unsigned div;
-	int ptr;
-
-	if (!nr_armdiv)
-		return -EINVAL;
-
-	for (ptr = 0; ptr < nr_armdiv; ptr++) {
-		div = armdiv[ptr];
-		if (div) {
-			/* cpufreq provides 266mhz as 266666000 not 266666666 */
-			calc = (parent / div / 1000) * 1000;
-			if (calc <= rate && div < best)
-				best = div;
-		}
-	}
-
-	return parent / best;
-}
-
-static unsigned long s3c2443_armclk_getrate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkcon0;
-	int val;
-
-	if (!nr_armdiv || !armdivmask)
-		return -EINVAL;
-
-	clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-	clkcon0 &= armdivmask;
-	val = clkcon0 >> S3C2443_CLKDIV0_ARMDIV_SHIFT;
-
-	return rate / armdiv[val];
-}
-
-static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent = clk_get_rate(clk->parent);
-	unsigned long calc;
-	unsigned div;
-	unsigned best = 256; /* bigger than any value */
-	int ptr;
-	int val = -1;
-
-	if (!nr_armdiv || !armdivmask)
-		return -EINVAL;
-
-	for (ptr = 0; ptr < nr_armdiv; ptr++) {
-		div = armdiv[ptr];
-		if (div) {
-			/* cpufreq provides 266mhz as 266666000 not 266666666 */
-			calc = (parent / div / 1000) * 1000;
-			if (calc <= rate && div < best) {
-				best = div;
-				val = ptr;
-			}
-		}
-	}
-
-	if (val >= 0) {
-		unsigned long clkcon0;
-
-		clkcon0 = __raw_readl(S3C2443_CLKDIV0);
-		clkcon0 &= ~armdivmask;
-		clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT;
-		__raw_writel(clkcon0, S3C2443_CLKDIV0);
-	}
-
-	return (val == -1) ? -EINVAL : 0;
-}
-
-static struct clk clk_armdiv = {
-	.name		= "armdiv",
-	.parent		= &clk_msysclk.clk,
-	.ops		= &(struct clk_ops) {
-		.round_rate = s3c2443_armclk_roundrate,
-		.get_rate = s3c2443_armclk_getrate,
-		.set_rate = s3c2443_armclk_setrate,
-	},
-};
-
-/* armclk
- *
- * this is the clock fed into the ARM core itself, from armdiv or from hclk.
- */
-
-static struct clk *clk_arm_sources[] = {
-	[0] = &clk_armdiv,
-	[1] = &clk_h,
-};
-
-static struct clksrc_clk clk_arm = {
-	.clk	= {
-		.name		= "armclk",
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_arm_sources,
-		.nr_sources = ARRAY_SIZE(clk_arm_sources),
-	},
-	.reg_src = { .reg = S3C2443_CLKDIV0, .size = 1, .shift = 13 },
-};
-
-/* usbhost
- *
- * usb host bus-clock, usually 48MHz to provide USB bus clock timing
-*/
-
-static struct clksrc_clk clk_usb_bus_host = {
-	.clk	= {
-		.name		= "usb-bus-host-parent",
-		.parent		= &clk_esysclk.clk,
-		.ctrlbit	= S3C2443_SCLKCON_USBHOST,
-		.enable		= s3c2443_clkcon_enable_s,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 4 },
-};
-
-/* common clksrc clocks */
-
-static struct clksrc_clk clksrc_clks[] = {
-	{
-		/* camera interface bus-clock, divided down from esysclk */
-		.clk	= {
-			.name		= "camif-upll",	/* same as 2440 name */
-			.parent		= &clk_esysclk.clk,
-			.ctrlbit	= S3C2443_SCLKCON_CAMCLK,
-			.enable		= s3c2443_clkcon_enable_s,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 26 },
-	}, {
-		.clk	= {
-			.name		= "display-if",
-			.parent		= &clk_esysclk.clk,
-			.ctrlbit	= S3C2443_SCLKCON_DISPCLK,
-			.enable		= s3c2443_clkcon_enable_s,
-		},
-		.reg_div = { .reg = S3C2443_CLKDIV1, .size = 8, .shift = 16 },
-	},
-};
-
-static struct clksrc_clk clk_esys_uart = {
-	/* ART baud-rate clock sourced from esysclk via a divisor */
-	.clk	= {
-		.name		= "uartclk",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 },
-};
-
-static struct clk clk_i2s_ext = {
-	.name		= "i2s-ext",
-};
-
-/* i2s_eplldiv
- *
- * This clock is the output from the I2S divisor of ESYSCLK, and is separate
- * from the mux that comes after it (cannot merge into one single clock)
-*/
-
-static struct clksrc_clk clk_i2s_eplldiv = {
-	.clk	= {
-		.name		= "i2s-eplldiv",
-		.parent		= &clk_esysclk.clk,
-	},
-	.reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, },
-};
-
-/* i2s-ref
- *
- * i2s bus reference clock, selectable from external, esysclk or epllref
- *
- * Note, this used to be two clocks, but was compressed into one.
-*/
-
-static struct clk *clk_i2s_srclist[] = {
-	[0] = &clk_i2s_eplldiv.clk,
-	[1] = &clk_i2s_ext,
-	[2] = &clk_epllref.clk,
-	[3] = &clk_epllref.clk,
-};
-
-static struct clksrc_clk clk_i2s = {
-	.clk	= {
-		.name		= "i2s-if",
-		.ctrlbit	= S3C2443_SCLKCON_I2SCLK,
-		.enable		= s3c2443_clkcon_enable_s,
-
-	},
-	.sources = &(struct clksrc_sources) {
-		.sources = clk_i2s_srclist,
-		.nr_sources = ARRAY_SIZE(clk_i2s_srclist),
-	},
-	.reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 },
-};
-
-static struct clk init_clocks_off[] = {
-	{
-		.name		= "iis",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIS,
-	}, {
-		.name		= "adc",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_ADC,
-	}, {
-		.name		= "i2c",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_IIC,
-	}
-};
-
-static struct clk init_clocks[] = {
-	{
-		.name		= "dma.0",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA0,
-	}, {
-		.name		= "dma.1",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA1,
-	}, {
-		.name		= "dma.2",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA2,
-	}, {
-		.name		= "dma.3",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA3,
-	}, {
-		.name		= "dma.4",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA4,
-	}, {
-		.name		= "dma.5",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_DMA5,
-	}, {
-		.name		= "gpio",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_GPIO,
-	}, {
-		.name		= "usb-host",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBH,
-	}, {
-		.name		= "usb-device",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_USBD,
-	}, {
-		.name		= "lcd",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_LCDC,
-
-	}, {
-		.name		= "timers",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_PWMT,
-	}, {
-		.name		= "cfc",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_CFC,
-	}, {
-		.name		= "ssmc",
-		.parent		= &clk_h,
-		.enable		= s3c2443_clkcon_enable_h,
-		.ctrlbit	= S3C2443_HCLKCON_SSMC,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.0",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART0,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.1",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART1,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.2",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART2,
-	}, {
-		.name		= "uart",
-		.devname	= "s3c2440-uart.3",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_UART3,
-	}, {
-		.name		= "rtc",
-		.parent		= &clk_p,
-		.enable		= s3c2443_clkcon_enable_p,
-		.ctrlbit	= S3C2443_PCLKCON_RTC,
-	}, {
-		.name		= "watchdog",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_WDT,
-	}, {
-		.name		= "ac97",
-		.parent		= &clk_p,
-		.ctrlbit	= S3C2443_PCLKCON_AC97,
-	}, {
-		.name		= "nand",
-		.parent		= &clk_h,
-	}, {
-		.name		= "usb-bus-host",
-		.parent		= &clk_usb_bus_host.clk,
-	}
-};
-
-static struct clk hsmmc1_clk = {
-	.name		= "hsmmc",
-	.devname	= "s3c-sdhci.1",
-	.parent		= &clk_h,
-	.enable		= s3c2443_clkcon_enable_h,
-	.ctrlbit	= S3C2443_HCLKCON_HSMMC,
-};
-
-static struct clk hsspi_clk = {
-	.name		= "spi",
-	.devname	= "s3c2443-spi.0",
-	.parent		= &clk_p,
-	.enable		= s3c2443_clkcon_enable_p,
-	.ctrlbit	= S3C2443_PCLKCON_HSSPI,
-};
-
-/* EPLLCON compatible enough to get on/off information */
-
-void __init_or_cpufreq s3c2443_common_setup_clocks(pll_fn get_mpll)
-{
-	unsigned long epllcon = __raw_readl(S3C2443_EPLLCON);
-	unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON);
-	struct clk *xtal_clk;
-	unsigned long xtal;
-	unsigned long pll;
-	int ptr;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	pll = get_mpll(mpllcon, xtal);
-	clk_msysclk.clk.rate = pll;
-	clk_mpll.rate = pll;
-
-	printk("CPU: MPLL %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n",
-	       (mpllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
-	       print_mhz(pll), print_mhz(clk_get_rate(&clk_armdiv)),
-	       print_mhz(clk_get_rate(&clk_h)),
-	       print_mhz(clk_get_rate(&clk_p)));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrc_clks); ptr++)
-		s3c_set_clksrc(&clksrc_clks[ptr], true);
-
-	/* ensure usb bus clock is within correct rate of 48MHz */
-
-	if (clk_get_rate(&clk_usb_bus_host.clk) != (48 * 1000 * 1000)) {
-		printk(KERN_INFO "Warning: USB host bus not at 48MHz\n");
-		clk_set_rate(&clk_usb_bus_host.clk, 48*1000*1000);
-	}
-
-	printk("CPU: EPLL %s %ld.%03ld MHz, usb-bus %ld.%03ld MHz\n",
-	       (epllcon & S3C2443_PLLCON_OFF) ? "off" : "on",
-	       print_mhz(clk_get_rate(&clk_epll)),
-	       print_mhz(clk_get_rate(&clk_usb_bus)));
-}
-
-static struct clk *clks[] __initdata = {
-	&clk_prediv,
-	&clk_mpllref,
-	&clk_mdivclk,
-	&clk_ext,
-	&clk_epll,
-	&clk_usb_bus,
-	&clk_armdiv,
-	&hsmmc1_clk,
-	&hsspi_clk,
-};
-
-static struct clksrc_clk *clksrcs[] __initdata = {
-	&clk_i2s_eplldiv,
-	&clk_i2s,
-	&clk_usb_bus_host,
-	&clk_epllref,
-	&clk_esysclk,
-	&clk_msysclk,
-	&clk_arm,
-};
-
-static struct clk_lookup s3c2443_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-	CLKDEV_INIT(NULL, "clk_uart_baud2", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud3", &clk_esys_uart.clk),
-	CLKDEV_INIT("s3c-sdhci.1", "mmc_busclk.0", &hsmmc1_clk),
-	CLKDEV_INIT("s3c2443-spi.0", "spi_busclk0", &hsspi_clk),
-};
-
-void __init s3c2443_common_init_clocks(int xtal, pll_fn get_mpll,
-				       unsigned int *divs, int nr_divs,
-				       int divmask)
-{
-	int ptr;
-
-	armdiv = divs;
-	nr_armdiv = nr_divs;
-	armdivmask = divmask;
-
-	/* s3c2443 parents h clock from prediv */
-	clk_h.parent = &clk_prediv;
-	clk_h.ops = &clk_h_ops;
-
-	/* and p clock from h clock */
-	clk_p.parent = &clk_h;
-	clk_p.ops = &clk_p_ops;
-
-	clk_usb_bus.parent = &clk_usb_bus_host.clk;
-	clk_epll.parent = &clk_epllref.clk;
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
-
-	for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++)
-		s3c_register_clksrc(clksrcs[ptr], 1);
-
-	s3c_register_clksrc(clksrc_clks, ARRAY_SIZE(clksrc_clks));
-	s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks));
-
-	/* See s3c2443/etc notes on disabling clocks at init time */
-	s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off));
-	clkdev_add_table(s3c2443_clk_lookup, ARRAY_SIZE(s3c2443_clk_lookup));
-
-	s3c2443_common_setup_clocks(get_mpll);
-}
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index 1bc8e73c94f9..c0763b837745 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -53,6 +53,7 @@
 #include <plat/cpu-freq.h>
 #include <plat/pll.h>
 #include <plat/pwm-core.h>
+#include <plat/watchdog-reset.h>
 
 #include "common.h"
 
@@ -73,7 +74,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32410000,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
 		.init		= s3c2410_init,
 		.name		= name_s3c2410
@@ -82,7 +82,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32410002,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2410_map_io,
-		.init_clocks	= s3c2410_init_clocks,
 		.init_uarts	= s3c2410_init_uarts,
 		.init		= s3c2410a_init,
 		.name		= name_s3c2410a
@@ -91,7 +90,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440000,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2440_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
 		.name		= name_s3c2440
@@ -100,7 +98,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2440_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2440_init,
 		.name		= name_s3c2440a
@@ -109,7 +106,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440aaa,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2442_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
 		.name		= name_s3c2442
@@ -118,7 +114,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32440aab,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2442_map_io,
-		.init_clocks	= s3c244x_init_clocks,
 		.init_uarts	= s3c244x_init_uarts,
 		.init		= s3c2442_init,
 		.name		= name_s3c2442b
@@ -127,7 +122,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32412001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
 		.init_uarts	= s3c2412_init_uarts,
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
@@ -136,7 +130,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32412003,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2412_map_io,
-		.init_clocks	= s3c2412_init_clocks,
 		.init_uarts	= s3c2412_init_uarts,
 		.init		= s3c2412_init,
 		.name		= name_s3c2412,
@@ -145,7 +138,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32450003,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2416_map_io,
-		.init_clocks	= s3c2416_init_clocks,
 		.init_uarts	= s3c2416_init_uarts,
 		.init		= s3c2416_init,
 		.name		= name_s3c2416,
@@ -154,7 +146,6 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.idcode		= 0x32443001,
 		.idmask		= 0xffffffff,
 		.map_io		= s3c2443_map_io,
-		.init_clocks	= s3c2443_init_clocks,
 		.init_uarts	= s3c2443_init_uarts,
 		.init		= s3c2443_init,
 		.name		= name_s3c2443,
@@ -316,21 +307,6 @@ struct s3c24xx_uart_resources s3c2410_uart_resources[] __initdata = {
 	},
 };
 
-/* initialise all the clocks */
-
-void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk,
-					   unsigned long hclk,
-					   unsigned long pclk)
-{
-	clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON),
-					clk_xtal.rate);
-
-	clk_mpll.rate = fclk;
-	clk_h.rate = hclk;
-	clk_p.rate = pclk;
-	clk_f.rate = fclk;
-}
-
 #if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2412) || \
 	defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 static struct resource s3c2410_dma_resource[] = {
@@ -534,3 +510,62 @@ struct platform_device s3c2443_device_dma = {
 	},
 };
 #endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2410)
+void __init s3c2410_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2412
+void __init s3c2412_init_clocks(int xtal)
+{
+	s3c2412_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2416
+void __init s3c2416_init_clocks(int xtal)
+{
+	s3c2443_common_clk_init(NULL, xtal, 0, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2440)
+void __init s3c2440_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#if defined(CONFIG_COMMON_CLK) && defined(CONFIG_CPU_S3C2442)
+void __init s3c2442_init_clocks(int xtal)
+{
+	s3c2410_common_clk_init(NULL, xtal, 2, S3C24XX_VA_CLKPWR);
+	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
+}
+#endif
+
+#ifdef CONFIG_CPU_S3C2443
+void __init s3c2443_init_clocks(int xtal)
+{
+	s3c2443_common_clk_init(NULL, xtal, 1, S3C24XX_VA_CLKPWR);
+}
+#endif
+
+#if defined(CONFIG_CPU_S3C2410) || defined(CONFIG_CPU_S3C2440) || \
+	defined(CONFIG_CPU_S3C2442)
+static struct resource s3c2410_dclk_resource[] = {
+	[0] = DEFINE_RES_MEM(0x56000084, 0x4),
+};
+
+struct platform_device s3c2410_device_dclk = {
+	.name		= "s3c2410-dclk",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(s3c2410_dclk_resource),
+	.resource	= s3c2410_dclk_resource,
+};
+#endif
diff --git a/arch/arm/mach-s3c24xx/common.h b/arch/arm/mach-s3c24xx/common.h
index e46c10417216..ac3ff12a0601 100644
--- a/arch/arm/mach-s3c24xx/common.h
+++ b/arch/arm/mach-s3c24xx/common.h
@@ -67,16 +67,15 @@ extern struct syscore_ops s3c2416_irq_syscore_ops;
 #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442)
 extern void s3c244x_map_io(void);
 extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no);
-extern void s3c244x_init_clocks(int xtal);
 extern void s3c244x_restart(enum reboot_mode mode, const char *cmd);
 #else
-#define s3c244x_init_clocks NULL
 #define s3c244x_init_uarts NULL
 #endif
 
 #ifdef CONFIG_CPU_S3C2440
 extern  int s3c2440_init(void);
 extern void s3c2440_map_io(void);
+extern void s3c2440_init_clocks(int xtal);
 extern void s3c2440_init_irq(void);
 #else
 #define s3c2440_init NULL
@@ -86,6 +85,7 @@ extern void s3c2440_init_irq(void);
 #ifdef CONFIG_CPU_S3C2442
 extern  int s3c2442_init(void);
 extern void s3c2442_map_io(void);
+extern void s3c2442_init_clocks(int xtal);
 extern void s3c2442_init_irq(void);
 #else
 #define s3c2442_init NULL
@@ -114,4 +114,21 @@ extern struct platform_device s3c2412_device_dma;
 extern struct platform_device s3c2440_device_dma;
 extern struct platform_device s3c2443_device_dma;
 
+extern struct platform_device s3c2410_device_dclk;
+
+#ifdef CONFIG_S3C2410_COMMON_CLK
+void __init s3c2410_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *reg_base);
+#endif
+#ifdef CONFIG_S3C2412_COMMON_CLK
+void __init s3c2412_common_clk_init(struct device_node *np, unsigned long xti_f,
+				unsigned long ext_f, void __iomem *reg_base);
+#endif
+#ifdef CONFIG_S3C2443_COMMON_CLK
+void __init s3c2443_common_clk_init(struct device_node *np, unsigned long xti_f,
+				    int current_soc,
+				    void __iomem *reg_base);
+#endif
+
 #endif /* __ARCH_ARM_MACH_S3C24XX_COMMON_H */
diff --git a/arch/arm/mach-s3c24xx/cpufreq-utils.c b/arch/arm/mach-s3c24xx/cpufreq-utils.c
index 2a0aa5684e72..d4d9514335f4 100644
--- a/arch/arm/mach-s3c24xx/cpufreq-utils.c
+++ b/arch/arm/mach-s3c24xx/cpufreq-utils.c
@@ -14,6 +14,7 @@
 #include <linux/errno.h>
 #include <linux/cpufreq.h>
 #include <linux/io.h>
+#include <linux/clk.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
@@ -60,5 +61,6 @@ void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg)
  */
 void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg)
 {
-	__raw_writel(cfg->pll.driver_data, S3C2410_MPLLCON);
+	if (!IS_ERR(cfg->mpll))
+		clk_set_rate(cfg->mpll, cfg->pll.frequency);
 }
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
index 3415b60082d7..3db6c10de023 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-clock.h
@@ -42,24 +42,6 @@
 #define S3C2410_CLKCON_IIS	     (1<<17)
 #define S3C2410_CLKCON_SPI	     (1<<18)
 
-/* DCLKCON register addresses in gpio.h */
-
-#define S3C2410_DCLKCON_DCLK0EN	     (1<<0)
-#define S3C2410_DCLKCON_DCLK0_PCLK   (0<<1)
-#define S3C2410_DCLKCON_DCLK0_UCLK   (1<<1)
-#define S3C2410_DCLKCON_DCLK0_DIV(x) (((x) - 1 )<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP(x) (((x) - 1 )<<8)
-#define S3C2410_DCLKCON_DCLK0_DIV_MASK ((0xf)<<4)
-#define S3C2410_DCLKCON_DCLK0_CMP_MASK ((0xf)<<8)
-
-#define S3C2410_DCLKCON_DCLK1EN	     (1<<16)
-#define S3C2410_DCLKCON_DCLK1_PCLK   (0<<17)
-#define S3C2410_DCLKCON_DCLK1_UCLK   (1<<17)
-#define S3C2410_DCLKCON_DCLK1_DIV(x) (((x) - 1) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP(x) (((x) - 1) <<24)
-#define S3C2410_DCLKCON_DCLK1_DIV_MASK ((0xf) <<20)
-#define S3C2410_DCLKCON_DCLK1_CMP_MASK ((0xf) <<24)
-
 #define S3C2410_CLKDIVN_PDIVN	     (1<<0)
 #define S3C2410_CLKDIVN_HDIVN	     (1<<1)
 
diff --git a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
index c2ef016032ab..c6583cfa5835 100644
--- a/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c24xx/include/mach/regs-gpio.h
@@ -457,9 +457,6 @@
 
 /* miscellaneous control */
 #define S3C2410_MISCCR	   S3C2410_GPIOREG(0x80)
-#define S3C2410_DCLKCON	   S3C2410_GPIOREG(0x84)
-
-#define S3C24XX_DCLKCON	   S3C24XX_GPIOREG2(0x84)
 
 /* see clock.h for dclk definitions */
 
diff --git a/arch/arm/mach-s3c24xx/mach-amlm5900.c b/arch/arm/mach-s3c24xx/mach-amlm5900.c
index 8ac9554aa996..5157e250dd13 100644
--- a/arch/arm/mach-s3c24xx/mach-amlm5900.c
+++ b/arch/arm/mach-s3c24xx/mach-amlm5900.c
@@ -161,11 +161,16 @@ static struct platform_device *amlm5900_devices[] __initdata = {
 static void __init amlm5900_map_io(void)
 {
 	s3c24xx_init_io(amlm5900_iodesc, ARRAY_SIZE(amlm5900_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(amlm5900_uartcfgs, ARRAY_SIZE(amlm5900_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init amlm5900_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 #ifdef CONFIG_FB_S3C2410
 static struct s3c2410fb_display __initdata amlm5900_lcd_info = {
 	.width		= 160,
@@ -241,6 +246,6 @@ MACHINE_START(AML_M5900, "AML_M5900")
 	.map_io		= amlm5900_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= amlm5900_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= amlm5900_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 81a270af2336..e053581cab0b 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -46,7 +46,6 @@
 
 #include <net/ax88796.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/asoc-s3c24xx_simtec.h>
@@ -352,6 +351,7 @@ static struct platform_device anubis_device_sm501 = {
 /* Standard Anubis devices */
 
 static struct platform_device *anubis_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_wdt,
 	&s3c_device_adc,
@@ -364,14 +364,6 @@ static struct platform_device *anubis_devices[] __initdata = {
 	&anubis_device_sm501,
 };
 
-static struct clk *anubis_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 /* I2C devices. */
 
 static struct i2c_board_info anubis_i2c_devs[] __initdata = {
@@ -394,23 +386,7 @@ static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
 
 static void __init anubis_map_io(void)
 {
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
-
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -428,6 +404,12 @@ static void __init anubis_map_io(void)
 	}
 }
 
+static void __init anubis_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init anubis_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -447,6 +429,6 @@ MACHINE_START(ANUBIS, "Simtec-Anubis")
 	.map_io		= anubis_map_io,
 	.init_machine	= anubis_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= anubis_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index d8f6bb1096cb..9db768f448a5 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -45,7 +45,6 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <linux/platform_data/mmc-s3cmci.h>
@@ -192,11 +191,16 @@ static struct platform_device *at2440evb_devices[] __initdata = {
 static void __init at2440evb_map_io(void)
 {
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
-	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(at2440evb_uartcfgs, ARRAY_SIZE(at2440evb_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init at2440evb_init_time(void)
+{
+	s3c2440_init_clocks(16934400);
+	samsung_timer_init();
+}
+
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
@@ -213,6 +217,6 @@ MACHINE_START(AT2440EVB, "AT2440EVB")
 	.map_io		= at2440evb_map_io,
 	.init_machine	= at2440evb_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= at2440evb_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index e371ff53a408..f9112b801a33 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -51,7 +51,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
@@ -523,6 +522,7 @@ static struct s3c_hwmon_pdata bast_hwmon_info = {
 // cat /sys/devices/platform/s3c24xx-adc/s3c-hwmon/in_0
 
 static struct platform_device *bast_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
@@ -537,14 +537,6 @@ static struct platform_device *bast_devices[] __initdata = {
 	&bast_sio,
 };
 
-static struct clk *bast_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 static struct s3c_cpufreq_board __initdata bast_cpufreq = {
 	.refresh	= 7800, /* 7.8usec */
 	.auto_io	= 1,
@@ -558,29 +550,19 @@ static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
 
 static void __init bast_map_io(void)
 {
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
-
 	s3c_hwmon_set_platdata(&bast_hwmon_info);
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init bast_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init bast_init(void)
 {
 	register_syscore_ops(&bast_pm_syscore_ops);
@@ -608,6 +590,6 @@ MACHINE_START(BAST, "Simtec-BAST")
 	.map_io		= bast_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= bast_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= bast_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index dc4db849f0fd..fc3a08d0cb3f 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -501,7 +501,6 @@ static struct platform_device gta02_buttons_device = {
 static void __init gta02_map_io(void)
 {
 	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
@@ -585,6 +584,11 @@ static void __init gta02_machine_init(void)
 	regulator_has_full_constraints();
 }
 
+static void __init gta02_init_time(void)
+{
+	s3c2442_init_clocks(12000000);
+	samsung_timer_init();
+}
 
 MACHINE_START(NEO1973_GTA02, "GTA02")
 	/* Maintainer: Nelson Castillo <arhuaco@freaks-unidos.net> */
@@ -592,6 +596,6 @@ MACHINE_START(NEO1973_GTA02, "GTA02")
 	.map_io		= gta02_map_io,
 	.init_irq	= s3c2442_init_irq,
 	.init_machine	= gta02_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= gta02_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-h1940.c b/arch/arm/mach-s3c24xx/mach-h1940.c
index e453acd92cbf..fbf5487ae5d1 100644
--- a/arch/arm/mach-s3c24xx/mach-h1940.c
+++ b/arch/arm/mach-s3c24xx/mach-h1940.c
@@ -57,7 +57,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/gpio-cfg.h>
@@ -646,7 +645,6 @@ static struct platform_device *h1940_devices[] __initdata = {
 static void __init h1940_map_io(void)
 {
 	s3c24xx_init_io(h1940_iodesc, ARRAY_SIZE(h1940_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(h1940_uartcfgs, ARRAY_SIZE(h1940_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -662,6 +660,12 @@ static void __init h1940_map_io(void)
 	WARN_ON(gpiochip_add(&h1940_latch_gpiochip));
 }
 
+static void __init h1940_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /* H1940 and RX3715 need to reserve this for suspend */
 static void __init h1940_reserve(void)
 {
@@ -739,6 +743,6 @@ MACHINE_START(H1940, "IPAQ-H1940")
 	.reserve	= h1940_reserve,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= h1940_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= h1940_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 5faa7239e7d6..e81ea82c55f9 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -507,11 +507,16 @@ static struct syscore_ops jive_pm_syscore_ops = {
 static void __init jive_map_io(void)
 {
 	s3c24xx_init_io(jive_iodesc, ARRAY_SIZE(jive_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(jive_uartcfgs, ARRAY_SIZE(jive_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init jive_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void jive_power_off(void)
 {
 	printk(KERN_INFO "powering system down...\n");
@@ -665,6 +670,6 @@ MACHINE_START(JIVE, "JIVE")
 	.init_irq	= s3c2412_init_irq,
 	.map_io		= jive_map_io,
 	.init_machine	= jive_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= jive_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 9e57fd9f4f3b..5cc40ec1d254 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -54,7 +54,6 @@
 #include <linux/mtd/partitions.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -525,11 +524,16 @@ static struct platform_device *mini2440_devices[] __initdata = {
 static void __init mini2440_map_io(void)
 {
 	s3c24xx_init_io(mini2440_iodesc, ARRAY_SIZE(mini2440_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init mini2440_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /*
  * mini2440_features string
  *
@@ -690,6 +694,6 @@ MACHINE_START(MINI2440, "MINI2440")
 	.map_io		= mini2440_map_io,
 	.init_machine	= mini2440_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= mini2440_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-n30.c b/arch/arm/mach-s3c24xx/mach-n30.c
index 4cccaad34847..3ac2a54348d6 100644
--- a/arch/arm/mach-s3c24xx/mach-n30.c
+++ b/arch/arm/mach-s3c24xx/mach-n30.c
@@ -45,7 +45,6 @@
 
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <linux/platform_data/mmc-s3cmci.h>
@@ -535,11 +534,16 @@ static void __init n30_map_io(void)
 {
 	s3c24xx_init_io(n30_iodesc, ARRAY_SIZE(n30_iodesc));
 	n30_hwinit();
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(n30_uartcfgs, ARRAY_SIZE(n30_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init n30_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 /* GPB3 is the line that controls the pull-up for the USB D+ line */
 
 static void __init n30_init(void)
@@ -591,7 +595,7 @@ MACHINE_START(N30, "Acer-N30")
 				Ben Dooks <ben-linux@fluff.org>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= samsung_timer_init,
+	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
@@ -602,7 +606,7 @@ MACHINE_START(N35, "Acer-N35")
 	/* Maintainer: Christer Weinigel <christer@weinigel.se>
 	*/
 	.atag_offset	= 0x100,
-	.init_time	= samsung_timer_init,
+	.init_time	= n30_init_time,
 	.init_machine	= n30_init,
 	.init_irq	= s3c2410_init_irq,
 	.map_io		= n30_map_io,
diff --git a/arch/arm/mach-s3c24xx/mach-nexcoder.c b/arch/arm/mach-s3c24xx/mach-nexcoder.c
index 3066851f584d..c82c281ce351 100644
--- a/arch/arm/mach-s3c24xx/mach-nexcoder.c
+++ b/arch/arm/mach-s3c24xx/mach-nexcoder.c
@@ -42,7 +42,6 @@
 #include <linux/platform_data/i2c-s3c2410.h>
 
 #include <plat/gpio-cfg.h>
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -135,13 +134,18 @@ static void __init nexcoder_sensorboard_init(void)
 static void __init nexcoder_map_io(void)
 {
 	s3c24xx_init_io(nexcoder_iodesc, ARRAY_SIZE(nexcoder_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(nexcoder_uartcfgs, ARRAY_SIZE(nexcoder_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
 	nexcoder_sensorboard_init();
 }
 
+static void __init nexcoder_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init nexcoder_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -154,6 +158,6 @@ MACHINE_START(NEXCODER_2440, "NexVision - Nexcoder 2440")
 	.map_io		= nexcoder_map_io,
 	.init_machine	= nexcoder_init,
 	.init_irq	= s3c2440_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= nexcoder_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index a4ae4bb3666d..189147b80eca 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -40,7 +40,6 @@
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/partitions.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
 #include <plat/devs.h>
@@ -344,20 +343,13 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 /* Standard Osiris devices */
 
 static struct platform_device *osiris_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_i2c0,
 	&s3c_device_wdt,
 	&s3c_device_nand,
 	&osiris_pcmcia,
 };
 
-static struct clk *osiris_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 static struct s3c_cpufreq_board __initdata osiris_cpufreq = {
 	.refresh	= 7800, /* refresh period is 7.8usec */
 	.auto_io	= 1,
@@ -368,23 +360,7 @@ static void __init osiris_map_io(void)
 {
 	unsigned long flags;
 
-	/* initialise the clocks */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = &clk_upll;
-	s3c24xx_dclk1.rate   = 24*1000*1000;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
-
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -408,6 +384,12 @@ static void __init osiris_map_io(void)
 	local_irq_restore(flags);
 }
 
+static void __init osiris_init_time(void)
+{
+	s3c2440_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init osiris_init(void)
 {
 	register_syscore_ops(&osiris_pm_syscore_ops);
@@ -429,6 +411,6 @@ MACHINE_START(OSIRIS, "Simtec-OSIRIS")
 	.map_io		= osiris_map_io,
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= osiris_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= osiris_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-otom.c b/arch/arm/mach-s3c24xx/mach-otom.c
index bdb3faac2d9b..45833001186d 100644
--- a/arch/arm/mach-s3c24xx/mach-otom.c
+++ b/arch/arm/mach-s3c24xx/mach-otom.c
@@ -30,7 +30,6 @@
 #include <mach/hardware.h>
 #include <mach/regs-gpio.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/samsung-time.h>
@@ -100,11 +99,16 @@ static struct platform_device *otom11_devices[] __initdata = {
 static void __init otom11_map_io(void)
 {
 	s3c24xx_init_io(otom11_iodesc, ARRAY_SIZE(otom11_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(otom11_uartcfgs, ARRAY_SIZE(otom11_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init otom11_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init otom11_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -117,6 +121,6 @@ MACHINE_START(OTOM, "Nex Vision - Otom 1.1")
 	.map_io		= otom11_map_io,
 	.init_machine	= otom11_init,
 	.init_irq	= s3c2410_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= otom11_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index 8c12787a8fd3..228c9094519d 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -304,11 +304,16 @@ __setup("tft=", qt2410_tft_setup);
 static void __init qt2410_map_io(void)
 {
 	s3c24xx_init_io(qt2410_iodesc, ARRAY_SIZE(qt2410_iodesc));
-	s3c24xx_init_clocks(12*1000*1000);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init qt2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init qt2410_machine_init(void)
 {
 	s3c_nand_set_platdata(&qt2410_nand_info);
@@ -346,6 +351,6 @@ MACHINE_START(QT2410, "QT2410")
 	.map_io		= qt2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= qt2410_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= qt2410_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index afb784e934c8..e2c6541909c1 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -54,7 +54,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
@@ -710,6 +709,7 @@ static struct i2c_board_info rx1950_i2c_devices[] = {
 };
 
 static struct platform_device *rx1950_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
@@ -728,20 +728,9 @@ static struct platform_device *rx1950_devices[] __initdata = {
 	&rx1950_leds,
 };
 
-static struct clk *rx1950_clocks[] __initdata = {
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-};
-
 static void __init rx1950_map_io(void)
 {
-	s3c24xx_clkout0.parent  = &clk_h;
-	s3c24xx_clkout1.parent  = &clk_f;
-
-	s3c24xx_register_clocks(rx1950_clocks, ARRAY_SIZE(rx1950_clocks));
-
 	s3c24xx_init_io(rx1950_iodesc, ARRAY_SIZE(rx1950_iodesc));
-	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx1950_uartcfgs, ARRAY_SIZE(rx1950_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 
@@ -754,6 +743,12 @@ static void __init rx1950_map_io(void)
 	s3c_pm_init();
 }
 
+static void __init rx1950_init_time(void)
+{
+	s3c2442_init_clocks(16934000);
+	samsung_timer_init();
+}
+
 static void __init rx1950_init_machine(void)
 {
 	int i;
@@ -816,6 +811,6 @@ MACHINE_START(RX1950, "HP iPAQ RX1950")
 	.reserve	= rx1950_reserve,
 	.init_irq	= s3c2442_init_irq,
 	.init_machine = rx1950_init_machine,
-	.init_time	= samsung_timer_init,
+	.init_time	= rx1950_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index e6535ce1bc5c..6e749ec3a2ea 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -46,7 +46,6 @@
 #include <mach/regs-lcd.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/pm.h>
@@ -179,11 +178,16 @@ static struct platform_device *rx3715_devices[] __initdata = {
 static void __init rx3715_map_io(void)
 {
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
-	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init rx3715_init_time(void)
+{
+	s3c2440_init_clocks(16934000);
+	samsung_timer_init();
+}
+
 /* H1940 and RX3715 need to reserve this for suspend */
 static void __init rx3715_reserve(void)
 {
@@ -210,6 +214,6 @@ MACHINE_START(RX3715, "IPAQ-RX3715")
 	.reserve	= rx3715_reserve,
 	.init_irq	= s3c2440_init_irq,
 	.init_machine	= rx3715_init_machine,
-	.init_time	= samsung_timer_init,
+	.init_time	= rx3715_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
index 70f0900d4bca..e4dcb9aa2ca2 100644
--- a/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
+++ b/arch/arm/mach-s3c24xx/mach-s3c2416-dt.c
@@ -18,7 +18,6 @@
 #include <linux/clocksource.h>
 #include <linux/irqchip.h>
 #include <linux/of_platform.h>
-#include <linux/serial_core.h>
 #include <linux/serial_s3c.h>
 
 #include <asm/mach/arch.h>
@@ -29,48 +28,14 @@
 
 #include "common.h"
 
-/*
- * The following lookup table is used to override device names when devices
- * are registered from device tree. This is temporarily added to enable
- * device tree support addition for the S3C2416 architecture.
- *
- * For drivers that require platform data to be provided from the machine
- * file, a platform data pointer can also be supplied along with the
- * devices names. Usually, the platform data elements that cannot be parsed
- * from the device tree by the drivers (example: function pointers) are
- * supplied. But it should be noted that this is a temporary mechanism and
- * at some point, the drivers should be capable of parsing all the platform
- * data from the device tree.
- */
-static const struct of_dev_auxdata s3c2416_auxdata_lookup[] __initconst = {
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART,
-				"s3c2440-uart.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x4000,
-				"s3c2440-uart.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0x8000,
-				"s3c2440-uart.2", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-uart", S3C24XX_PA_UART + 0xC000,
-				"s3c2440-uart.3", NULL),
-	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC0,
-				"s3c-sdhci.0", NULL),
-	OF_DEV_AUXDATA("samsung,s3c6410-sdhci", S3C_PA_HSMMC1,
-				"s3c-sdhci.1", NULL),
-	OF_DEV_AUXDATA("samsung,s3c2440-i2c", S3C_PA_IIC,
-				"s3c2440-i2c.0", NULL),
-	{},
-};
-
 static void __init s3c2416_dt_map_io(void)
 {
 	s3c24xx_init_io(NULL, 0);
-	s3c24xx_init_clocks(12000000);
 }
 
 static void __init s3c2416_dt_machine_init(void)
 {
-	of_platform_populate(NULL, of_default_bus_match_table,
-				s3c2416_auxdata_lookup, NULL);
-
+	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
 	s3c_pm_init();
 }
 
@@ -86,6 +51,5 @@ DT_MACHINE_START(S3C2416_DT, "Samsung S3C2416 (Flattened Device Tree)")
 	.map_io		= s3c2416_dt_map_io,
 	.init_irq	= irqchip_init,
 	.init_machine	= s3c2416_dt_machine_init,
-	 .init_time	= clocksource_of_init,
 	.restart	= s3c2416_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2410.c b/arch/arm/mach-s3c24xx/mach-smdk2410.c
index f32924ee0e9f..419fadd6e446 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2410.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2410.c
@@ -99,11 +99,16 @@ static struct platform_device *smdk2410_devices[] __initdata = {
 static void __init smdk2410_map_io(void)
 {
 	s3c24xx_init_io(smdk2410_iodesc, ARRAY_SIZE(smdk2410_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(smdk2410_uartcfgs, ARRAY_SIZE(smdk2410_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2410_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2410_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -118,6 +123,6 @@ MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switc
 	.map_io		= smdk2410_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= smdk2410_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2410_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2413.c b/arch/arm/mach-s3c24xx/mach-smdk2413.c
index 233fe52d2015..a38f8a049e22 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2413.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2413.c
@@ -106,11 +106,16 @@ static void __init smdk2413_fixup(struct tag *tags, char **cmdline,
 static void __init smdk2413_map_io(void)
 {
 	s3c24xx_init_io(smdk2413_iodesc, ARRAY_SIZE(smdk2413_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2413_uartcfgs, ARRAY_SIZE(smdk2413_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2413_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2413_machine_init(void)
 {	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
@@ -159,6 +164,6 @@ MACHINE_START(SMDK2413, "SMDK2413")
 	.init_irq	= s3c2412_init_irq,
 	.map_io		= smdk2413_map_io,
 	.init_machine	= smdk2413_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2413_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2416.c b/arch/arm/mach-s3c24xx/mach-smdk2416.c
index b3b54d8e1410..fa6f30d23601 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2416.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2416.c
@@ -219,10 +219,15 @@ static struct platform_device *smdk2416_devices[] __initdata = {
 	&s3c2443_device_dma,
 };
 
+static void __init smdk2416_init_time(void)
+{
+	s3c2416_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2416_map_io(void)
 {
 	s3c24xx_init_io(smdk2416_iodesc, ARRAY_SIZE(smdk2416_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2416_uartcfgs, ARRAY_SIZE(smdk2416_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
@@ -257,6 +262,6 @@ MACHINE_START(SMDK2416, "SMDK2416")
 	.init_irq	= s3c2416_init_irq,
 	.map_io		= smdk2416_map_io,
 	.init_machine	= smdk2416_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2416_init_time,
 	.restart	= s3c2416_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2440.c b/arch/arm/mach-s3c24xx/mach-smdk2440.c
index d071dcfea548..5fb89c0ae17a 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2440.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2440.c
@@ -38,7 +38,6 @@
 #include <mach/fb.h>
 #include <linux/platform_data/i2c-s3c2410.h>
 
-#include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/samsung-time.h>
@@ -159,11 +158,16 @@ static struct platform_device *smdk2440_devices[] __initdata = {
 static void __init smdk2440_map_io(void)
 {
 	s3c24xx_init_io(smdk2440_iodesc, ARRAY_SIZE(smdk2440_iodesc));
-	s3c24xx_init_clocks(16934400);
 	s3c24xx_init_uarts(smdk2440_uartcfgs, ARRAY_SIZE(smdk2440_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2440_init_time(void)
+{
+	s3c2440_init_clocks(16934400);
+	samsung_timer_init();
+}
+
 static void __init smdk2440_machine_init(void)
 {
 	s3c24xx_fb_set_platdata(&smdk2440_fb_info);
@@ -180,6 +184,6 @@ MACHINE_START(S3C2440, "SMDK2440")
 	.init_irq	= s3c2440_init_irq,
 	.map_io		= smdk2440_map_io,
 	.init_machine	= smdk2440_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2440_init_time,
 	.restart	= s3c244x_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-smdk2443.c b/arch/arm/mach-s3c24xx/mach-smdk2443.c
index 06c4d77de3a5..ef5d5ea33182 100644
--- a/arch/arm/mach-s3c24xx/mach-smdk2443.c
+++ b/arch/arm/mach-s3c24xx/mach-smdk2443.c
@@ -121,11 +121,16 @@ static struct platform_device *smdk2443_devices[] __initdata = {
 static void __init smdk2443_map_io(void)
 {
 	s3c24xx_init_io(smdk2443_iodesc, ARRAY_SIZE(smdk2443_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(smdk2443_uartcfgs, ARRAY_SIZE(smdk2443_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init smdk2443_init_time(void)
+{
+	s3c2443_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init smdk2443_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -145,6 +150,6 @@ MACHINE_START(SMDK2443, "SMDK2443")
 	.init_irq	= s3c2443_init_irq,
 	.map_io		= smdk2443_map_io,
 	.init_machine	= smdk2443_machine_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= smdk2443_init_time,
 	.restart	= s3c2443_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-tct_hammer.c b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
index 4108b2f0cede..c616ca2d409e 100644
--- a/arch/arm/mach-s3c24xx/mach-tct_hammer.c
+++ b/arch/arm/mach-s3c24xx/mach-tct_hammer.c
@@ -135,11 +135,16 @@ static struct platform_device *tct_hammer_devices[] __initdata = {
 static void __init tct_hammer_map_io(void)
 {
 	s3c24xx_init_io(tct_hammer_iodesc, ARRAY_SIZE(tct_hammer_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(tct_hammer_uartcfgs, ARRAY_SIZE(tct_hammer_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init tct_hammer_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init tct_hammer_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -151,6 +156,6 @@ MACHINE_START(TCT_HAMMER, "TCT_HAMMER")
 	.map_io		= tct_hammer_map_io,
 	.init_irq	= s3c2410_init_irq,
 	.init_machine	= tct_hammer_init,
-	.init_time	= samsung_timer_init,
+	.init_time	= tct_hammer_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vr1000.c b/arch/arm/mach-s3c24xx/mach-vr1000.c
index 1cc5b1bd51cd..f88c584c3001 100644
--- a/arch/arm/mach-s3c24xx/mach-vr1000.c
+++ b/arch/arm/mach-s3c24xx/mach-vr1000.c
@@ -43,7 +43,6 @@
 #include <mach/regs-gpio.h>
 #include <mach/gpio-samsung.h>
 
-#include <plat/clock.h>
 #include <plat/cpu.h>
 #include <plat/devs.h>
 #include <plat/samsung-time.h>
@@ -286,6 +285,7 @@ static struct i2c_board_info vr1000_i2c_devs[] __initdata = {
 /* devices for this board */
 
 static struct platform_device *vr1000_devices[] __initdata = {
+	&s3c2410_device_dclk,
 	&s3c_device_ohci,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
@@ -299,14 +299,6 @@ static struct platform_device *vr1000_devices[] __initdata = {
 	&vr1000_led3,
 };
 
-static struct clk *vr1000_clocks[] __initdata = {
-	&s3c24xx_dclk0,
-	&s3c24xx_dclk1,
-	&s3c24xx_clkout0,
-	&s3c24xx_clkout1,
-	&s3c24xx_uclk,
-};
-
 static void vr1000_power_off(void)
 {
 	gpio_direction_output(S3C2410_GPB(9), 1);
@@ -314,29 +306,19 @@ static void vr1000_power_off(void)
 
 static void __init vr1000_map_io(void)
 {
-	/* initialise clock sources */
-
-	s3c24xx_dclk0.parent = &clk_upll;
-	s3c24xx_dclk0.rate   = 12*1000*1000;
-
-	s3c24xx_dclk1.parent = NULL;
-	s3c24xx_dclk1.rate   = 3692307;
-
-	s3c24xx_clkout0.parent  = &s3c24xx_dclk0;
-	s3c24xx_clkout1.parent  = &s3c24xx_dclk1;
-
-	s3c24xx_uclk.parent  = &s3c24xx_clkout1;
-
-	s3c24xx_register_clocks(vr1000_clocks, ARRAY_SIZE(vr1000_clocks));
-
 	pm_power_off = vr1000_power_off;
 
 	s3c24xx_init_io(vr1000_iodesc, ARRAY_SIZE(vr1000_iodesc));
-	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(vr1000_uartcfgs, ARRAY_SIZE(vr1000_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init vr1000_init_time(void)
+{
+	s3c2410_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init vr1000_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -357,6 +339,6 @@ MACHINE_START(VR1000, "Thorcom-VR1000")
 	.map_io		= vr1000_map_io,
 	.init_machine	= vr1000_init,
 	.init_irq	= s3c2410_init_irq,
-	.init_time	= samsung_timer_init,
+	.init_time	= vr1000_init_time,
 	.restart	= s3c2410_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index 40868c0e0a68..6b706c915387 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -142,11 +142,16 @@ static void __init vstms_fixup(struct tag *tags, char **cmdline,
 static void __init vstms_map_io(void)
 {
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
-	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
 	samsung_set_timer_source(SAMSUNG_PWM3, SAMSUNG_PWM4);
 }
 
+static void __init vstms_init_time(void)
+{
+	s3c2412_init_clocks(12000000);
+	samsung_timer_init();
+}
+
 static void __init vstms_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
@@ -162,6 +167,6 @@ MACHINE_START(VSTMS, "VSTMS")
 	.init_irq	= s3c2412_init_irq,
 	.init_machine	= vstms_init,
 	.map_io		= vstms_map_io,
-	.init_time	= samsung_timer_init,
+	.init_time	= vstms_init_time,
 	.restart	= s3c2412_restart,
 MACHINE_END
diff --git a/arch/arm/mach-s3c24xx/pm.c b/arch/arm/mach-s3c24xx/pm.c
index 68ea5b7e5dc7..b19256ec8d40 100644
--- a/arch/arm/mach-s3c24xx/pm.c
+++ b/arch/arm/mach-s3c24xx/pm.c
@@ -51,9 +51,6 @@
 #define PFX "s3c24xx-pm: "
 
 static struct sleep_save core_save[] = {
-	SAVE_ITEM(S3C2410_LOCKTIME),
-	SAVE_ITEM(S3C2410_CLKCON),
-
 	/* we restore the timings here, with the proviso that the board
 	 * brings the system up in an slower, or equal frequency setting
 	 * to the original system.
@@ -69,18 +66,6 @@ static struct sleep_save core_save[] = {
 	SAVE_ITEM(S3C2410_BANKCON3),
 	SAVE_ITEM(S3C2410_BANKCON4),
 	SAVE_ITEM(S3C2410_BANKCON5),
-
-#ifndef CONFIG_CPU_FREQ
-	SAVE_ITEM(S3C2410_CLKDIVN),
-	SAVE_ITEM(S3C2410_MPLLCON),
-	SAVE_ITEM(S3C2410_REFRESH),
-#endif
-	SAVE_ITEM(S3C2410_UPLLCON),
-	SAVE_ITEM(S3C2410_CLKSLOW),
-};
-
-static struct sleep_save misc_save[] = {
-	SAVE_ITEM(S3C2410_DCLKCON),
 };
 
 /* s3c_pm_check_resume_pin
@@ -140,12 +125,10 @@ void s3c_pm_configure_extint(void)
 void s3c_pm_restore_core(void)
 {
 	s3c_pm_do_restore_core(core_save, ARRAY_SIZE(core_save));
-	s3c_pm_do_restore(misc_save, ARRAY_SIZE(misc_save));
 }
 
 void s3c_pm_save_core(void)
 {
-	s3c_pm_do_save(misc_save, ARRAY_SIZE(misc_save));
 	s3c_pm_do_save(core_save, ARRAY_SIZE(core_save));
 }
 
diff --git a/arch/arm/mach-s3c24xx/s3c2410.c b/arch/arm/mach-s3c24xx/s3c2410.c
index 04b58cb49888..7eab88829883 100644
--- a/arch/arm/mach-s3c24xx/s3c2410.c
+++ b/arch/arm/mach-s3c24xx/s3c2410.c
@@ -85,62 +85,6 @@ void __init s3c2410_map_io(void)
 
 void __init_or_cpufreq s3c2410_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal);
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2410_CLKDIVN_HDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2410_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2410: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-/* fake ARMCLK for use with cpufreq, etc. */
-
-static struct clk s3c2410_armclk = {
-	.name	= "armclk",
-	.parent	= &clk_f,
-	.id	= -1,
-};
-
-static struct clk_lookup s3c2410_clk_lookup[] = {
-	CLKDEV_INIT(NULL, "clk_uart_baud0", &clk_p),
-	CLKDEV_INIT(NULL, "clk_uart_baud1", &s3c24xx_uclk),
-};
-
-void __init s3c2410_init_clocks(int xtal)
-{
-	s3c24xx_register_baseclocks(xtal);
-	s3c2410_setup_clocks();
-	s3c2410_baseclk_add();
-	s3c24xx_register_clock(&s3c2410_armclk);
-	clkdev_add_table(s3c2410_clk_lookup, ARRAY_SIZE(s3c2410_clk_lookup));
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 
 struct bus_type s3c2410_subsys = {
diff --git a/arch/arm/mach-s3c24xx/s3c2412.c b/arch/arm/mach-s3c24xx/s3c2412.c
index 657cbaca80ac..d49f52fbc842 100644
--- a/arch/arm/mach-s3c24xx/s3c2412.c
+++ b/arch/arm/mach-s3c24xx/s3c2412.c
@@ -173,49 +173,6 @@ void __init s3c2412_map_io(void)
 
 void __init_or_cpufreq s3c2412_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long tmp;
-	unsigned long xtal;
-	unsigned long fclk;
-	unsigned long hclk;
-	unsigned long pclk;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	/* now we've got our machine bits initialised, work out what
-	 * clocks we've got */
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2);
-
-	clk_mpll.rate = fclk;
-
-	tmp = __raw_readl(S3C2410_CLKDIVN);
-
-	/* work out clock scalings */
-
-	hclk = fclk / ((tmp & S3C2412_CLKDIVN_HDIVN_MASK) + 1);
-	hclk /= ((tmp & S3C2412_CLKDIVN_ARMDIVN) ? 2 : 1);
-	pclk = hclk / ((tmp & S3C2412_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brieft summary of clocks, etc */
-
-	printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c2412_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c2412_setup_clocks();
-	s3c2412_baseclk_add();
 }
 
 /* need to register the subsystem before we actually register the device, and
diff --git a/arch/arm/mach-s3c24xx/s3c2442.c b/arch/arm/mach-s3c24xx/s3c2442.c
index 2c8adc028538..fb9da2b603a2 100644
--- a/arch/arm/mach-s3c24xx/s3c2442.c
+++ b/arch/arm/mach-s3c24xx/s3c2442.c
@@ -53,117 +53,6 @@
 
 #include "common.h"
 
-/* S3C2442 extended clock support */
-
-static unsigned long s3c2442_camif_upll_round(struct clk *clk,
-					      unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	int div;
-
-	if (rate > parent_rate)
-		return parent_rate;
-
-	div = parent_rate / rate;
-
-	if (div == 3)
-		return parent_rate / 3;
-
-	/* note, we remove the +/- 1 calculations for the divisor */
-
-	div /= 2;
-
-	if (div < 1)
-		div = 1;
-	else if (div > 16)
-		div = 16;
-
-	return parent_rate / (div * 2);
-}
-
-static int s3c2442_camif_upll_setrate(struct clk *clk, unsigned long rate)
-{
-	unsigned long parent_rate = clk_get_rate(clk->parent);
-	unsigned long camdivn =  __raw_readl(S3C2440_CAMDIVN);
-
-	rate = s3c2442_camif_upll_round(clk, rate);
-
-	camdivn &= ~S3C2442_CAMDIVN_CAMCLK_DIV3;
-
-	if (rate == parent_rate) {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_SEL;
-	} else if ((parent_rate / rate) == 3) {
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= S3C2442_CAMDIVN_CAMCLK_DIV3;
-	} else {
-		camdivn &= ~S3C2440_CAMDIVN_CAMCLK_MASK;
-		camdivn |= S3C2440_CAMDIVN_CAMCLK_SEL;
-		camdivn |= (((parent_rate / rate) / 2) - 1);
-	}
-
-	__raw_writel(camdivn, S3C2440_CAMDIVN);
-
-	return 0;
-}
-
-/* Extra S3C2442 clocks */
-
-static struct clk s3c2442_clk_cam = {
-	.name		= "camif",
-	.id		= -1,
-	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
-};
-
-static struct clk s3c2442_clk_cam_upll = {
-	.name		= "camif-upll",
-	.id		= -1,
-	.ops		= &(struct clk_ops) {
-		.set_rate	= s3c2442_camif_upll_setrate,
-		.round_rate	= s3c2442_camif_upll_round,
-	},
-};
-
-static int s3c2442_clk_add(struct device *dev, struct subsys_interface *sif)
-{
-	struct clk *clock_upll;
-	struct clk *clock_h;
-	struct clk *clock_p;
-
-	clock_p = clk_get(NULL, "pclk");
-	clock_h = clk_get(NULL, "hclk");
-	clock_upll = clk_get(NULL, "upll");
-
-	if (IS_ERR(clock_p) || IS_ERR(clock_h) || IS_ERR(clock_upll)) {
-		printk(KERN_ERR "S3C2442: Failed to get parent clocks\n");
-		return -EINVAL;
-	}
-
-	s3c2442_clk_cam.parent = clock_h;
-	s3c2442_clk_cam_upll.parent = clock_upll;
-
-	s3c24xx_register_clock(&s3c2442_clk_cam);
-	s3c24xx_register_clock(&s3c2442_clk_cam_upll);
-
-	clk_disable(&s3c2442_clk_cam);
-
-	return 0;
-}
-
-static struct subsys_interface s3c2442_clk_interface = {
-	.name		= "s3c2442_clk",
-	.subsys		= &s3c2442_subsys,
-	.add_dev	= s3c2442_clk_add,
-};
-
-static __init int s3c2442_clk_init(void)
-{
-	return subsys_interface_register(&s3c2442_clk_interface);
-}
-
-arch_initcall(s3c2442_clk_init);
-
-
 static struct device s3c2442_dev = {
 	.bus		= &s3c2442_subsys,
 };
diff --git a/arch/arm/mach-s3c24xx/s3c244x.c b/arch/arm/mach-s3c24xx/s3c244x.c
index fe30ebb234d2..4a64bcc9eb51 100644
--- a/arch/arm/mach-s3c24xx/s3c244x.c
+++ b/arch/arm/mach-s3c24xx/s3c244x.c
@@ -46,6 +46,7 @@
 #include <plat/nand-core.h>
 #include <plat/watchdog-reset.h>
 
+#include "common.h"
 #include "regs-dsc.h"
 
 static struct map_desc s3c244x_iodesc[] __initdata = {
@@ -74,67 +75,11 @@ void __init s3c244x_map_io(void)
 	s3c_nand_setname("s3c2440-nand");
 	s3c_device_ts.name = "s3c2440-ts";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";
+	s3c2410_device_dclk.name = "s3c2440-dclk";
 }
 
 void __init_or_cpufreq s3c244x_setup_clocks(void)
 {
-	struct clk *xtal_clk;
-	unsigned long clkdiv;
-	unsigned long camdiv;
-	unsigned long xtal;
-	unsigned long hclk, fclk, pclk;
-	int hdiv = 1;
-
-	xtal_clk = clk_get(NULL, "xtal");
-	xtal = clk_get_rate(xtal_clk);
-	clk_put(xtal_clk);
-
-	fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2;
-
-	clkdiv = __raw_readl(S3C2410_CLKDIVN);
-	camdiv = __raw_readl(S3C2440_CAMDIVN);
-
-	/* work out clock scalings */
-
-	switch (clkdiv & S3C2440_CLKDIVN_HDIVN_MASK) {
-	case S3C2440_CLKDIVN_HDIVN_1:
-		hdiv = 1;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_2:
-		hdiv = 2;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_4_8:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK4_HALF) ? 8 : 4;
-		break;
-
-	case S3C2440_CLKDIVN_HDIVN_3_6:
-		hdiv = (camdiv & S3C2440_CAMDIVN_HCLK3_HALF) ? 6 : 3;
-		break;
-	}
-
-	hclk = fclk / hdiv;
-	pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1);
-
-	/* print brief summary of clocks, etc */
-
-	printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n",
-	       print_mhz(fclk), print_mhz(hclk), print_mhz(pclk));
-
-	s3c24xx_setup_clocks(fclk, hclk, pclk);
-}
-
-void __init s3c244x_init_clocks(int xtal)
-{
-	/* initialise the clocks here, to allow other things like the
-	 * console to use them, and to add new ones after the initialisation
-	 */
-
-	s3c24xx_register_baseclocks(xtal);
-	s3c244x_setup_clocks();
-	s3c2410_baseclk_add();
-	samsung_wdt_reset_init(S3C24XX_VA_WATCHDOG);
 }
 
 /* Since the S3C2442 and S3C2440 share items, put both subsystems here */
diff --git a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
index 7231c8e4975e..72d4178ad23b 100644
--- a/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h
@@ -119,6 +119,7 @@ struct s3c_plltab {
 struct s3c_cpufreq_config {
 	struct s3c_freq		freq;
 	struct s3c_freq		max;
+	struct clk		*mpll;
 	struct cpufreq_frequency_table pll;
 	struct s3c_clkdivs	divs;
 	struct s3c_cpufreq_info *info;	/* for core, not drivers */