diff options
| author | Chen-Yu Tsai <wens@csie.org> | 2014-05-02 17:57:29 +0200 |
|---|---|---|
| committer | Maxime Ripard <maxime.ripard@free-electrons.com> | 2014-05-06 00:42:20 +0200 |
| commit | 3906c0a688587408fa37a411d5e79778039e9dc3 (patch) | |
| tree | 4a853a6e274e807719aa0faa3a281be25e809c92 /arch/arm | |
| parent | ARM: dts: sun7i: Enable mmc controller on various A20 boards (diff) | |
| download | linux-3906c0a688587408fa37a411d5e79778039e9dc3.tar.xz linux-3906c0a688587408fa37a411d5e79778039e9dc3.zip | |
ARM: dts: sun7i: Add basic support for the Cubietruck WiFi module
The CubieTruck has an AMPAK AP6210 WiFi+Bluetooth module. The WiFi
part is a BCM43362 IC connected to MMC3 in the A20 SoC via SDIO.
The IC also takes a power enable signal via GPIO.
The WiFi module supports out-of-band interrupt signaling via GPIO,
but this is not supported in this patch.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 31 |
1 files changed, 31 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index a39f08970b64..9dbb763c8e27 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -29,6 +29,14 @@ status = "okay"; }; + mmc3: mmc@01c12000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + non-removable; + status = "okay"; + }; + usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; @@ -57,6 +65,18 @@ }; pinctrl@01c20800 { + mmc3_pins_a: mmc3@0 { + /* AP6210 requires pull-up */ + allwinner,pull = <1>; + }; + + vmmc3_pin_cubietruck: vmmc3_pin@0 { + allwinner,pins = "PH9"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + ahci_pwr_pin_cubietruck: ahci_pwr_pin@1 { allwinner,pins = "PH12"; allwinner,function = "gpio_out"; @@ -154,4 +174,15 @@ reg_usb2_vbus: usb2-vbus { status = "okay"; }; + + reg_vmmc3: vmmc3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&vmmc3_pin_cubietruck>; + regulator-name = "vmmc3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&pio 7 9 0>; + }; }; |