Merge branch 'board-new' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into next/boards

"Rafael J. Wysocki" <rjw@sisk.pl> writes:

   Renesas ARM-based platforms: new boards support for v3.5

    * Support for the KZM-A9-GT board from Kuninori Morimoto and Magnus Damm.
    * Support for the armadillo800eva board from Kuninori Morimoto and Magnus Damm.

   This is based on the Renesas core SoC code updates I've sent a separate pull
   request for.

* 'board-new' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: (29 commits)
  ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
  ARM: mach-shmobile: Use DT_MACHINE for KZM9G
  ARM: mach-shmobile: kzm9g: enable SMP boot
  ARM: mach-shmobile: kzm9g: defconfig update
  ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
  ARM: mach-shmobile: kzm9g: add SDHI support
  ARM: mach-shmobile: kzm9g: add MMCIF support
  ARM: mach-shmobile: kzm9g: correct screen direction
  ARM: mach-shmobile: sh73a0.h: add GPIO_NR
  ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3
  ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen support
  ARM: mach-shmobile: kzm9g: add LCDC support
  ARM: mach-shmobile: kzm9g: add external USB Host support
  ARM: mach-shmobile: kzm9g: add SMSC 9221 support
  ARM: mach-shmobile: kzm9g: add defconfig
  ARM: mach-shmobile: add KZM-A9-GT board support
  ARM: mach-shmobile: armadillo800eva: defconfig update
  ARM: mach-shmobile: clock-r8a7740: add sh-eth clock
  ARM: mach-shmobile: r8a7740: reserve DMA memory for the frame buffer
  ARM: mach-shmobile: armadillo800eva: add MMCIF support
  ...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

13 files changed, 1603 insertions, 5 deletions

diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
new file mode 100644
index 000000000000..a7505a95a3b7
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts
@@ -0,0 +1,22 @@
+/*
+ * Device Tree Source for the armadillo 800 eva board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "armadillo 800 eva";
+	compatible = "renesas,armadillo800eva";
+
+	memory {
+		device_type = "memory";
+		reg = <0x40000000 0x20000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts
new file mode 100644
index 000000000000..ed1bae5a24f1
--- /dev/null
+++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts
@@ -0,0 +1,22 @@
+/*
+ * Device Tree Source for the KZM-A9-GT board
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2.  This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/dts-v1/;
+/include/ "skeleton.dtsi"
+
+/ {
+	model = "KZM-A9-GT";
+	compatible = "renesas,kzm9g";
+
+	memory {
+		device_type = "memory";
+		reg = <0x41000000 0x1e800000>;
+	};
+};
diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig
new file mode 100644
index 000000000000..ddc9fe6a78ac
--- /dev/null
+++ b/arch/arm/configs/armadillo800eva_defconfig
@@ -0,0 +1,142 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_ARCH_R8A7740=y
+CONFIG_MACH_ARMADILLO800EVA=y
+# CONFIG_SH_TIMER_TMU is not set
+# CONFIG_ARM_THUMB is not set
+CONFIG_CPU_BPREDICT_DISABLE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_458693=y
+CONFIG_ARM_ERRATA_460075=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_743622=y
+CONFIG_ARM_ERRATA_751472=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
+CONFIG_CMDLINE_FORCE=y
+CONFIG_KEXEC=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+CONFIG_SH_ETH=y
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ST1232=y
+# CONFIG_SERIO is not set
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=8
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_SH_MOBILE=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_SH4_FSI=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_RENESAS_USBHS=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_RENESAS_USBHS_UDC=y
+CONFIG_USB_ETH=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_UIO=y
+CONFIG_UIO_PDRV_GENIRQ=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_ANSI_CPRNG=y
+CONFIG_XZ_DEC=y
diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig
new file mode 100644
index 000000000000..e3ebc20ed0a7
--- /dev/null
+++ b/arch/arm/configs/kzm9g_defconfig
@@ -0,0 +1,139 @@
+# CONFIG_ARM_PATCH_PHYS_VIRT is not set
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_SHMOBILE=y
+CONFIG_KEYBOARD_GPIO_POLLED=y
+CONFIG_ARCH_SH73A0=y
+CONFIG_MACH_KZM9G=y
+CONFIG_MEMORY_START=0x41000000
+CONFIG_MEMORY_SIZE=0x1f000000
+CONFIG_ARM_ERRATA_743622=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
+CONFIG_SCHED_MC=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_HIGHMEM=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200"
+CONFIG_KEXEC=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_PM_RUNTIME=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_IRDA=y
+CONFIG_SH_IRDA=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+CONFIG_SMSC911X=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_SPARSEKMAP=y
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ST1232=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_NR_UARTS=9
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_SH_MOBILE=y
+CONFIG_GPIO_PCF857X=y
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+CONFIG_FB_SH_MOBILE_MERAM=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_VERBOSE_PROCFS is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_SOC_SH4_FSI=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_R8A66597_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+CONFIG_MMC_SDHI=y
+CONFIG_MMC_SH_MMCIF=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_RTC_CLASS=y
+CONFIG_DMADEVICES=y
+CONFIG_SH_DMAE=y
+CONFIG_ASYNC_TX_DMA=y
+CONFIG_STAGING=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_V4_1=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_ARM_UNWIND is not set
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_DES=y
+CONFIG_CRC16=y
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 34560cab45d9..8e3602adabef 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -93,11 +93,23 @@ config MACH_BONITO
 	select ARCH_REQUIRE_GPIOLIB
 	depends on ARCH_R8A7740
 
+config MACH_ARMADILLO800EVA
+	bool "Armadillo-800 EVA board"
+	depends on ARCH_R8A7740
+	select ARCH_REQUIRE_GPIOLIB
+	select USE_OF
+
 config MACH_MARZEN
 	bool "MARZEN board"
 	depends on ARCH_R8A7779
 	select ARCH_REQUIRE_GPIOLIB
 
+config MACH_KZM9G
+	bool "KZM-A9-GT board"
+	depends on ARCH_SH73A0
+	select ARCH_REQUIRE_GPIOLIB
+	select USE_OF
+
 comment "SH-Mobile System Configuration"
 
 config CPU_HAS_INTEVT
@@ -110,7 +122,8 @@ config MEMORY_START
 	hex "Physical memory start address"
 	default "0x50000000" if MACH_G3EVM
 	default "0x40000000" if MACH_G4EVM || MACH_AP4EVB || MACH_AG5EVM || \
-				MACH_MACKEREL || MACH_BONITO
+				MACH_MACKEREL || MACH_BONITO || \
+				MACH_ARMADILLO800EVA
 	default "0x41000000" if MACH_KOTA2
 	default "0x00000000"
 	---help---
@@ -122,7 +135,8 @@ config MEMORY_SIZE
 	hex "Physical memory size"
 	default "0x08000000" if MACH_G3EVM
 	default "0x08000000" if MACH_G4EVM
-	default "0x20000000" if MACH_AG5EVM || MACH_BONITO
+	default "0x20000000" if MACH_AG5EVM || MACH_BONITO || \
+				MACH_ARMADILLO800EVA
 	default "0x1e000000" if MACH_KOTA2
 	default "0x10000000" if MACH_AP4EVB || MACH_MACKEREL
 	default "0x04000000"
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index e7c2590b75d9..4ac8c12c72ba 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -49,6 +49,8 @@ obj-$(CONFIG_MACH_MACKEREL)	+= board-mackerel.o
 obj-$(CONFIG_MACH_KOTA2)	+= board-kota2.o
 obj-$(CONFIG_MACH_BONITO)	+= board-bonito.o
 obj-$(CONFIG_MACH_MARZEN)	+= board-marzen.o
+obj-$(CONFIG_MACH_ARMADILLO800EVA)	+= board-armadillo800eva.o
+obj-$(CONFIG_MACH_KZM9G)	+= board-kzm9g.o
 
 # Framework support
 obj-$(CONFIG_SMP)		+= $(smp-y)
diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c
new file mode 100644
index 000000000000..9e37026ef9dd
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -0,0 +1,784 @@
+/*
+ * armadillo 800 eva board support
+ *
+ * Copyright (C) 2012 Renesas Solutions Corp.
+ * Copyright (C) 2012 Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/sh_eth.h>
+#include <linux/videodev2.h>
+#include <linux/usb/renesas_usbhs.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <mach/common.h>
+#include <mach/irqs.h>
+#include <asm/page.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <mach/r8a7740.h>
+#include <video/sh_mobile_lcdc.h>
+
+/*
+ * CON1		Camera Module
+ * CON2		Extension Bus
+ * CON3		HDMI Output
+ * CON4		Composite Video Output
+ * CON5		H-UDI JTAG
+ * CON6		ARM JTAG
+ * CON7		SD1
+ * CON8		SD2
+ * CON9		RTC BackUp
+ * CON10	Monaural Mic Input
+ * CON11	Stereo Headphone Output
+ * CON12	Audio Line Output(L)
+ * CON13	Audio Line Output(R)
+ * CON14	AWL13 Module
+ * CON15	Extension
+ * CON16	LCD1
+ * CON17	LCD2
+ * CON19	Power Input
+ * CON20	USB1
+ * CON21	USB2
+ * CON22	Serial
+ * CON23	LAN
+ * CON24	USB3
+ * LED1		Camera LED(Yellow)
+ * LED2		Power LED (Green)
+ * ED3-LED6	User LED(Yellow)
+ * LED7		LAN link LED(Green)
+ * LED8		LAN activity LED(Yellow)
+ */
+
+/*
+ * DipSwitch
+ *
+ *                    SW1
+ *
+ * -12345678-+---------------+----------------------------
+ *  1        | boot          | hermit
+ *  0        | boot          | OS auto boot
+ * -12345678-+---------------+----------------------------
+ *   00      | boot device   | eMMC
+ *   10      | boot device   | SDHI0 (CON7)
+ *   01      | boot device   | -
+ *   11      | boot device   | Extension Buss (CS0)
+ * -12345678-+---------------+----------------------------
+ *     0     | Extension Bus | D8-D15 disable, eMMC enable
+ *     1     | Extension Bus | D8-D15 enable,  eMMC disable
+ * -12345678-+---------------+----------------------------
+ *      0    | SDHI1         | COM8 disable, COM14 enable
+ *      1    | SDHI1         | COM8 enable,  COM14 disable
+ * -12345678-+---------------+----------------------------
+ *       0   | USB0          | COM20 enable,  COM24 disable
+ *       1   | USB0          | COM20 disable, COM24 enable
+ * -12345678-+---------------+----------------------------
+ *        00 | JTAG          | SH-X2
+ *        10 | JTAG          | ARM
+ *        01 | JTAG          | -
+ *        11 | JTAG          | Boundary Scan
+ *-----------+---------------+----------------------------
+ */
+
+/*
+ * USB function
+ *
+ * When you use USB Function,
+ * set SW1.6 ON, and connect cable to CN24.
+ *
+ * USBF needs workaround on R8A7740 chip.
+ * These are a little bit complex.
+ * see
+ *	usbhsf_power_ctrl()
+ *
+ * CAUTION
+ *
+ * It uses autonomy mode for USB hotplug at this point
+ * (= usbhs_private.platform_callback.get_vbus is NULL),
+ * since we don't know what's happen on PM control
+ * on this workaround.
+ */
+#define USBCR1		0xe605810a
+#define USBH		0xC6700000
+#define USBH_USBCTR	0x10834
+
+struct usbhsf_private {
+	struct clk *phy;
+	struct clk *usb24;
+	struct clk *pci;
+	struct clk *func;
+	struct clk *host;
+	void __iomem *usbh_base;
+	struct renesas_usbhs_platform_info info;
+};
+
+#define usbhsf_get_priv(pdev)				\
+	container_of(renesas_usbhs_get_info(pdev),	\
+		     struct usbhsf_private, info)
+
+static int usbhsf_get_id(struct platform_device *pdev)
+{
+	return USBHS_GADGET;
+}
+
+static void usbhsf_power_ctrl(struct platform_device *pdev,
+			      void __iomem *base, int enable)
+{
+	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+	/*
+	 * Work around for USB Function.
+	 * It needs USB host clock, and settings
+	 */
+	if (enable) {
+		/*
+		 * enable all the related usb clocks
+		 * for usb workaround
+		 */
+		clk_enable(priv->usb24);
+		clk_enable(priv->pci);
+		clk_enable(priv->host);
+		clk_enable(priv->func);
+		clk_enable(priv->phy);
+
+		/*
+		 * set USBCR1
+		 *
+		 * Port1 is driven by USB function,
+		 * Port2 is driven by USB HOST
+		 * One HOST (Port1 or Port2 is HOST)
+		 * USB PLL input clock = 24MHz
+		 */
+		__raw_writew(0xd750, USBCR1);
+		mdelay(1);
+
+		/*
+		 * start USB Host
+		 */
+		__raw_writel(0x0000000c, priv->usbh_base + USBH_USBCTR);
+		__raw_writel(0x00000008, priv->usbh_base + USBH_USBCTR);
+		mdelay(10);
+
+		/*
+		 * USB PHY Power ON
+		 */
+		__raw_writew(0xd770, USBCR1);
+		__raw_writew(0x4000, base + 0x102); /* USBF :: SUSPMODE */
+
+	} else {
+		__raw_writel(0x0000010f, priv->usbh_base + USBH_USBCTR);
+		__raw_writew(0xd7c0, USBCR1); /* GPIO */
+
+		clk_disable(priv->phy);
+		clk_disable(priv->func);	/* usb work around */
+		clk_disable(priv->host);	/* usb work around */
+		clk_disable(priv->pci);		/* usb work around */
+		clk_disable(priv->usb24);	/* usb work around */
+	}
+}
+
+static void usbhsf_hardware_exit(struct platform_device *pdev)
+{
+	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+	if (!IS_ERR(priv->phy))
+		clk_put(priv->phy);
+	if (!IS_ERR(priv->usb24))
+		clk_put(priv->usb24);
+	if (!IS_ERR(priv->pci))
+		clk_put(priv->pci);
+	if (!IS_ERR(priv->host))
+		clk_put(priv->host);
+	if (!IS_ERR(priv->func))
+		clk_put(priv->func);
+	if (priv->usbh_base)
+		iounmap(priv->usbh_base);
+
+	priv->phy	= NULL;
+	priv->usb24	= NULL;
+	priv->pci	= NULL;
+	priv->host	= NULL;
+	priv->func	= NULL;
+	priv->usbh_base	= NULL;
+}
+
+static int usbhsf_hardware_init(struct platform_device *pdev)
+{
+	struct usbhsf_private *priv = usbhsf_get_priv(pdev);
+
+	priv->phy	= clk_get(&pdev->dev, "phy");
+	priv->usb24	= clk_get(&pdev->dev, "usb24");
+	priv->pci	= clk_get(&pdev->dev, "pci");
+	priv->func	= clk_get(&pdev->dev, "func");
+	priv->host	= clk_get(&pdev->dev, "host");
+	priv->usbh_base	= ioremap_nocache(USBH, 0x20000);
+
+	if (IS_ERR(priv->phy)		||
+	    IS_ERR(priv->usb24)		||
+	    IS_ERR(priv->pci)		||
+	    IS_ERR(priv->host)		||
+	    IS_ERR(priv->func)		||
+	    !priv->usbh_base) {
+		dev_err(&pdev->dev, "USB clock setting failed\n");
+		usbhsf_hardware_exit(pdev);
+		return -EIO;
+	}
+
+	/* usb24 use 1/1 of parent clock (= usb24s = 24MHz) */
+	clk_set_rate(priv->usb24,
+		     clk_get_rate(clk_get_parent(priv->usb24)));
+
+	return 0;
+}
+
+static struct usbhsf_private usbhsf_private = {
+	.info = {
+		.platform_callback = {
+			.get_id		= usbhsf_get_id,
+			.hardware_init	= usbhsf_hardware_init,
+			.hardware_exit	= usbhsf_hardware_exit,
+			.power_ctrl	= usbhsf_power_ctrl,
+		},
+		.driver_param = {
+			.buswait_bwait		= 5,
+			.detection_delay	= 5,
+		},
+	}
+};
+
+static struct resource usbhsf_resources[] = {
+	{
+		.name	= "USBHS",
+		.start	= 0xe6890000,
+		.end	= 0xe6890104 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= evt2irq(0x0A20),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usbhsf_device = {
+	.name	= "renesas_usbhs",
+	.dev = {
+		.platform_data = &usbhsf_private.info,
+	},
+	.id = -1,
+	.num_resources	= ARRAY_SIZE(usbhsf_resources),
+	.resource	= usbhsf_resources,
+};
+
+/* Ether */
+static struct sh_eth_plat_data sh_eth_platdata = {
+	.phy			= 0x00, /* LAN8710A */
+	.edmac_endian		= EDMAC_LITTLE_ENDIAN,
+	.register_type		= SH_ETH_REG_GIGABIT,
+	.phy_interface		= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource sh_eth_resources[] = {
+	{
+		.start	= 0xe9a00000,
+		.end	= 0xe9a00800 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= 0xe9a01800,
+		.end	= 0xe9a02000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= evt2irq(0x0500),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_eth_device = {
+	.name = "sh-eth",
+	.id = -1,
+	.dev = {
+		.platform_data = &sh_eth_platdata,
+	},
+	.resource = sh_eth_resources,
+	.num_resources = ARRAY_SIZE(sh_eth_resources),
+};
+
+/* LCDC */
+static struct fb_videomode lcdc0_mode = {
+	.name		= "AMPIER/AM-800480",
+	.xres		= 800,
+	.yres		= 480,
+	.left_margin	= 88,
+	.right_margin	= 40,
+	.hsync_len	= 128,
+	.upper_margin	= 20,
+	.lower_margin	= 5,
+	.vsync_len	= 5,
+	.sync		= 0,
+};
+
+static struct sh_mobile_lcdc_info lcdc0_info = {
+	.clock_source	= LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan		= LCDC_CHAN_MAINLCD,
+		.fourcc		= V4L2_PIX_FMT_RGB565,
+		.interface_type	= RGB24,
+		.clock_divider	= 5,
+		.flags		= 0,
+		.lcd_modes	= &lcdc0_mode,
+		.num_modes	= 1,
+		.panel_cfg = {
+			.width	= 111,
+			.height = 68,
+		},
+	},
+};
+
+static struct resource lcdc0_resources[] = {
+	[0] = {
+		.name	= "LCD0",
+		.start	= 0xfe940000,
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc0_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc0_resources),
+	.resource	= lcdc0_resources,
+	.id		= 0,
+	.dev	= {
+		.platform_data	= &lcdc0_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* GPIO KEY */
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW1"),
+	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW2"),
+	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW3"),
+	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW4"),
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device gpio_keys_device = {
+	.name   = "gpio-keys",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &gpio_key_info,
+	},
+};
+
+/* SDHI0 */
+/*
+ * FIXME
+ *
+ * It use polling mode here, since
+ * CD (= Card Detect) pin is not connected to SDHI0_CD.
+ * We can use IRQ31 as card detect irq,
+ * but it needs chattering removal operation
+ */
+#define IRQ31	evt2irq(0x33E0)
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |\
+			  MMC_CAP_NEEDS_POLL,
+	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi0_resources[] = {
+	{
+		.name	= "SDHI0",
+		.start	= 0xe6850000,
+		.end	= 0xe6850100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	/*
+	 * no SH_MOBILE_SDHI_IRQ_CARD_DETECT here
+	 */
+	{
+		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
+		.start	= evt2irq(0x0E20),
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
+		.start	= evt2irq(0x0E40),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name		= "sh_mobile_sdhi",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &sdhi0_info,
+	},
+	.num_resources	= ARRAY_SIZE(sdhi0_resources),
+	.resource	= sdhi0_resources,
+};
+
+/* SDHI1 */
+static struct sh_mobile_sdhi_info sdhi1_info = {
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ,
+	.tmio_ocr_mask	= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+};
+
+static struct resource sdhi1_resources[] = {
+	[0] = {
+		.name	= "SDHI1",
+		.start	= 0xe6860000,
+		.end	= 0xe6860100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= evt2irq(0x0E80),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= evt2irq(0x0EA0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.start	= evt2irq(0x0EC0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi1_device = {
+	.name		= "sh_mobile_sdhi",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &sdhi1_info,
+	},
+	.num_resources	= ARRAY_SIZE(sdhi1_resources),
+	.resource	= sdhi1_resources,
+};
+
+/* MMCIF */
+static struct sh_mmcif_plat_data sh_mmcif_plat = {
+	.sup_pclk	= 0,
+	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
+	.caps		= MMC_CAP_4_BIT_DATA |
+			  MMC_CAP_8_BIT_DATA |
+			  MMC_CAP_NONREMOVABLE,
+};
+
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "MMCIF",
+		.start	= 0xe6bd0000,
+		.end	= 0xe6bd0100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		/* MMC ERR */
+		.start	= evt2irq(0x1AC0),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* MMC NOR */
+		.start	= evt2irq(0x1AE0),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sh_mmcif_device = {
+	.name		= "sh_mmcif",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &sh_mmcif_plat,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* I2C */
+static struct i2c_board_info i2c0_devices[] = {
+	{
+		I2C_BOARD_INFO("st1232-ts", 0x55),
+		.irq = evt2irq(0x0340),
+	},
+};
+
+/*
+ * board devices
+ */
+static struct platform_device *eva_devices[] __initdata = {
+	&lcdc0_device,
+	&gpio_keys_device,
+	&sh_eth_device,
+	&sdhi0_device,
+	&sh_mmcif_device,
+};
+
+static void __init eva_clock_init(void)
+{
+	struct clk *system	= clk_get(NULL, "system_clk");
+	struct clk *xtal1	= clk_get(NULL, "extal1");
+	struct clk *usb24s	= clk_get(NULL, "usb24s");
+
+	if (IS_ERR(system)	||
+	    IS_ERR(xtal1)	||
+	    IS_ERR(usb24s)) {
+		pr_err("armadillo800eva board clock init failed\n");
+		goto clock_error;
+	}
+
+	/* armadillo 800 eva extal1 is 24MHz */
+	clk_set_rate(xtal1, 24000000);
+
+	/* usb24s use extal1 (= system) clock (= 24MHz) */
+	clk_set_parent(usb24s, system);
+
+clock_error:
+	if (!IS_ERR(system))
+		clk_put(system);
+	if (!IS_ERR(xtal1))
+		clk_put(xtal1);
+	if (!IS_ERR(usb24s))
+		clk_put(usb24s);
+}
+
+/*
+ * board init
+ */
+static void __init eva_init(void)
+{
+	eva_clock_init();
+
+	r8a7740_pinmux_init();
+
+	/* SCIFA1 */
+	gpio_request(GPIO_FN_SCIFA1_RXD, NULL);
+	gpio_request(GPIO_FN_SCIFA1_TXD, NULL);
+
+	/* LCDC0 */
+	gpio_request(GPIO_FN_LCDC0_SELECT,	NULL);
+	gpio_request(GPIO_FN_LCD0_D0,		NULL);
+	gpio_request(GPIO_FN_LCD0_D1,		NULL);
+	gpio_request(GPIO_FN_LCD0_D2,		NULL);
+	gpio_request(GPIO_FN_LCD0_D3,		NULL);
+	gpio_request(GPIO_FN_LCD0_D4,		NULL);
+	gpio_request(GPIO_FN_LCD0_D5,		NULL);
+	gpio_request(GPIO_FN_LCD0_D6,		NULL);
+	gpio_request(GPIO_FN_LCD0_D7,		NULL);
+	gpio_request(GPIO_FN_LCD0_D8,		NULL);
+	gpio_request(GPIO_FN_LCD0_D9,		NULL);
+	gpio_request(GPIO_FN_LCD0_D10,		NULL);
+	gpio_request(GPIO_FN_LCD0_D11,		NULL);
+	gpio_request(GPIO_FN_LCD0_D12,		NULL);
+	gpio_request(GPIO_FN_LCD0_D13,		NULL);
+	gpio_request(GPIO_FN_LCD0_D14,		NULL);
+	gpio_request(GPIO_FN_LCD0_D15,		NULL);
+	gpio_request(GPIO_FN_LCD0_D16,		NULL);
+	gpio_request(GPIO_FN_LCD0_D17,		NULL);
+	gpio_request(GPIO_FN_LCD0_D18_PORT40,	NULL);
+	gpio_request(GPIO_FN_LCD0_D19_PORT4,	NULL);
+	gpio_request(GPIO_FN_LCD0_D20_PORT3,	NULL);
+	gpio_request(GPIO_FN_LCD0_D21_PORT2,	NULL);
+	gpio_request(GPIO_FN_LCD0_D22_PORT0,	NULL);
+	gpio_request(GPIO_FN_LCD0_D23_PORT1,	NULL);
+	gpio_request(GPIO_FN_LCD0_DCK,		NULL);
+	gpio_request(GPIO_FN_LCD0_VSYN,		NULL);
+	gpio_request(GPIO_FN_LCD0_HSYN,		NULL);
+	gpio_request(GPIO_FN_LCD0_DISP,		NULL);
+	gpio_request(GPIO_FN_LCD0_LCLK_PORT165,	NULL);
+
+	gpio_request(GPIO_PORT61, NULL); /* LCDDON */
+	gpio_direction_output(GPIO_PORT61, 1);
+
+	gpio_request(GPIO_PORT202, NULL); /* LCD0_LED_CONT */
+	gpio_direction_output(GPIO_PORT202, 0);
+
+	/* Touchscreen */
+	gpio_request(GPIO_FN_IRQ10,	NULL); /* TP_INT */
+	gpio_request(GPIO_PORT166,	NULL); /* TP_RST_B */
+	gpio_direction_output(GPIO_PORT166, 1);
+
+	/* GETHER */
+	gpio_request(GPIO_FN_ET_CRS,		NULL);
+	gpio_request(GPIO_FN_ET_MDC,		NULL);
+	gpio_request(GPIO_FN_ET_MDIO,		NULL);
+	gpio_request(GPIO_FN_ET_TX_ER,		NULL);
+	gpio_request(GPIO_FN_ET_RX_ER,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD0,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD1,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD2,		NULL);
+	gpio_request(GPIO_FN_ET_ERXD3,		NULL);
+	gpio_request(GPIO_FN_ET_TX_CLK,		NULL);
+	gpio_request(GPIO_FN_ET_TX_EN,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD0,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD1,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD2,		NULL);
+	gpio_request(GPIO_FN_ET_ETXD3,		NULL);
+	gpio_request(GPIO_FN_ET_PHY_INT,	NULL);
+	gpio_request(GPIO_FN_ET_COL,		NULL);
+	gpio_request(GPIO_FN_ET_RX_DV,		NULL);
+	gpio_request(GPIO_FN_ET_RX_CLK,		NULL);
+
+	gpio_request(GPIO_PORT18, NULL); /* PHY_RST */
+	gpio_direction_output(GPIO_PORT18, 1);
+
+	/* USB */
+	gpio_request(GPIO_PORT159, NULL); /* USB_DEVICE_MODE */
+	gpio_direction_input(GPIO_PORT159);
+
+	if (gpio_get_value(GPIO_PORT159)) {
+		/* USB Host */
+	} else {
+		/* USB Func */
+		gpio_request(GPIO_FN_VBUS, NULL);
+		platform_device_register(&usbhsf_device);
+	}
+
+	/* SDHI0 */
+	gpio_request(GPIO_FN_SDHI0_CMD, NULL);
+	gpio_request(GPIO_FN_SDHI0_CLK, NULL);
+	gpio_request(GPIO_FN_SDHI0_D0, NULL);
+	gpio_request(GPIO_FN_SDHI0_D1, NULL);
+	gpio_request(GPIO_FN_SDHI0_D2, NULL);
+	gpio_request(GPIO_FN_SDHI0_D3, NULL);
+	gpio_request(GPIO_FN_SDHI0_WP, NULL);
+
+	gpio_request(GPIO_PORT17, NULL);	/* SDHI0_18/33_B */
+	gpio_request(GPIO_PORT74, NULL);	/* SDHI0_PON */
+	gpio_request(GPIO_PORT75, NULL);	/* SDSLOT1_PON */
+	gpio_direction_output(GPIO_PORT17, 0);
+	gpio_direction_output(GPIO_PORT74, 1);
+	gpio_direction_output(GPIO_PORT75, 1);
+
+	/* we can use GPIO_FN_IRQ31_PORT167 here for SDHI0 CD irq */
+
+	/*
+	 * MMCIF
+	 *
+	 * Here doesn't care SW1.4 status,
+	 * since CON2 is not mounted.
+	 */
+	gpio_request(GPIO_FN_MMC1_CLK_PORT103,	NULL);
+	gpio_request(GPIO_FN_MMC1_CMD_PORT104,	NULL);
+	gpio_request(GPIO_FN_MMC1_D0_PORT149,	NULL);
+	gpio_request(GPIO_FN_MMC1_D1_PORT148,	NULL);
+	gpio_request(GPIO_FN_MMC1_D2_PORT147,	NULL);
+	gpio_request(GPIO_FN_MMC1_D3_PORT146,	NULL);
+	gpio_request(GPIO_FN_MMC1_D4_PORT145,	NULL);
+	gpio_request(GPIO_FN_MMC1_D5_PORT144,	NULL);
+	gpio_request(GPIO_FN_MMC1_D6_PORT143,	NULL);
+	gpio_request(GPIO_FN_MMC1_D7_PORT142,	NULL);
+
+	/*
+	 * CAUTION
+	 *
+	 * DBGMD/LCDC0/FSIA MUX
+	 * DBGMD_SELECT_B should be set after setting PFC Function.
+	 */
+	gpio_request(GPIO_PORT176, NULL);
+	gpio_direction_output(GPIO_PORT176, 1);
+
+	/*
+	 * We can switch CON8/CON14 by SW1.5,
+	 * but it needs after DBGMD_SELECT_B
+	 */
+	gpio_request(GPIO_PORT6, NULL);
+	gpio_direction_input(GPIO_PORT6);
+	if (gpio_get_value(GPIO_PORT6)) {
+		/* CON14 enable */
+	} else {
+		/* CON8 (SDHI1) enable */
+		gpio_request(GPIO_FN_SDHI1_CLK,	NULL);
+		gpio_request(GPIO_FN_SDHI1_CMD,	NULL);
+		gpio_request(GPIO_FN_SDHI1_D0,	NULL);
+		gpio_request(GPIO_FN_SDHI1_D1,	NULL);
+		gpio_request(GPIO_FN_SDHI1_D2,	NULL);
+		gpio_request(GPIO_FN_SDHI1_D3,	NULL);
+		gpio_request(GPIO_FN_SDHI1_CD,	NULL);
+		gpio_request(GPIO_FN_SDHI1_WP,	NULL);
+
+		gpio_request(GPIO_PORT16, NULL); /* SDSLOT2_PON */
+		gpio_direction_output(GPIO_PORT16, 1);
+
+		platform_device_register(&sdhi1_device);
+	}
+
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 32K*8way */
+	l2x0_init(__io(0xf0002000), 0x40440000, 0x82000fff);
+#endif
+
+	i2c_register_board_info(0, i2c0_devices, ARRAY_SIZE(i2c0_devices));
+
+	r8a7740_add_standard_devices();
+
+	platform_add_devices(eva_devices,
+			     ARRAY_SIZE(eva_devices));
+}
+
+static void __init eva_earlytimer_init(void)
+{
+	r8a7740_clock_init(MD_CK0 | MD_CK2);
+	shmobile_earlytimer_init();
+}
+
+static void __init eva_add_early_devices(void)
+{
+	r8a7740_add_early_devices();
+
+	/* override timer setup with board-specific code */
+	shmobile_timer.init = eva_earlytimer_init;
+}
+
+static const char *eva_boards_compat_dt[] __initdata = {
+	"renesas,armadillo800eva",
+	NULL,
+};
+
+DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva")
+	.map_io		= r8a7740_map_io,
+	.init_early	= eva_add_early_devices,
+	.init_irq	= r8a7740_init_irq,
+	.handle_irq	= shmobile_handle_irq_intc,
+	.init_machine	= eva_init,
+	.timer		= &shmobile_timer,
+	.dt_compat	= eva_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c
new file mode 100644
index 000000000000..d8e33b682832
--- /dev/null
+++ b/arch/arm/mach-shmobile/board-kzm9g.c
@@ -0,0 +1,460 @@
+/*
+ * KZM-A9-GT board support
+ *
+ * Copyright (C) 2012	Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
+#include <linux/input.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
+#include <linux/mfd/tmio.h>
+#include <linux/platform_device.h>
+#include <linux/smsc911x.h>
+#include <linux/usb/r8a66597.h>
+#include <linux/videodev2.h>
+#include <mach/irqs.h>
+#include <mach/sh73a0.h>
+#include <mach/common.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/hardware/gic.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <video/sh_mobile_lcdc.h>
+
+/*
+ * external GPIO
+ */
+#define GPIO_PCF8575_BASE	(GPIO_NR)
+#define GPIO_PCF8575_PORT10	(GPIO_NR + 8)
+#define GPIO_PCF8575_PORT11	(GPIO_NR + 9)
+#define GPIO_PCF8575_PORT12	(GPIO_NR + 10)
+#define GPIO_PCF8575_PORT13	(GPIO_NR + 11)
+#define GPIO_PCF8575_PORT14	(GPIO_NR + 12)
+#define GPIO_PCF8575_PORT15	(GPIO_NR + 13)
+#define GPIO_PCF8575_PORT16	(GPIO_NR + 14)
+
+/* SMSC 9221 */
+static struct resource smsc9221_resources[] = {
+	[0] = {
+		.start	= 0x10000000, /* CS4 */
+		.end	= 0x100000ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x260), /* IRQ3 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct smsc911x_platform_config smsc9221_platdata = {
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+};
+
+static struct platform_device smsc_device = {
+	.name		= "smsc911x",
+	.dev  = {
+		.platform_data = &smsc9221_platdata,
+	},
+	.resource	= smsc9221_resources,
+	.num_resources	= ARRAY_SIZE(smsc9221_resources),
+};
+
+/* USB external chip */
+static struct r8a66597_platdata usb_host_data = {
+	.on_chip	= 0,
+	.xtal		= R8A66597_PLATDATA_XTAL_48MHZ,
+};
+
+static struct resource usb_resources[] = {
+	[0] = {
+		.start	= 0x10010000,
+		.end	= 0x1001ffff - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x220), /* IRQ1 */
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device usb_host_device = {
+	.name	= "r8a66597_hcd",
+	.dev = {
+		.platform_data		= &usb_host_data,
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+	},
+	.num_resources	= ARRAY_SIZE(usb_resources),
+	.resource	= usb_resources,
+};
+
+/* LCDC */
+static struct fb_videomode kzm_lcdc_mode = {
+	.name		= "WVGA Panel",
+	.xres		= 800,
+	.yres		= 480,
+	.left_margin	= 220,
+	.right_margin	= 110,
+	.hsync_len	= 70,
+	.upper_margin	= 20,
+	.lower_margin	= 5,
+	.vsync_len	= 5,
+	.sync		= 0,
+};
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+	.clock_source = LCDC_CLK_BUS,
+	.ch[0] = {
+		.chan		= LCDC_CHAN_MAINLCD,
+		.fourcc		= V4L2_PIX_FMT_RGB565,
+		.interface_type	= RGB24,
+		.lcd_modes	= &kzm_lcdc_mode,
+		.num_modes	= 1,
+		.clock_divider	= 5,
+		.flags		= 0,
+		.panel_cfg = {
+			.width	= 152,
+			.height	= 91,
+		},
+	}
+};
+
+static struct resource lcdc_resources[] = {
+	[0] = {
+		.name	= "LCDC",
+		.start	= 0xfe940000,
+		.end	= 0xfe943fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= intcs_evt2irq(0x580),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device lcdc_device = {
+	.name		= "sh_mobile_lcdc_fb",
+	.num_resources	= ARRAY_SIZE(lcdc_resources),
+	.resource	= lcdc_resources,
+	.dev	= {
+		.platform_data	= &lcdc_info,
+		.coherent_dma_mask = ~0,
+	},
+};
+
+/* MMCIF */
+static struct resource sh_mmcif_resources[] = {
+	[0] = {
+		.name	= "MMCIF",
+		.start	= 0xe6bd0000,
+		.end	= 0xe6bd00ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gic_spi(141),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.start	= gic_spi(140),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct sh_mmcif_plat_data sh_mmcif_platdata = {
+	.ocr		= MMC_VDD_165_195,
+	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
+};
+
+static struct platform_device mmc_device = {
+	.name		= "sh_mmcif",
+	.dev		= {
+		.dma_mask		= NULL,
+		.coherent_dma_mask	= 0xffffffff,
+		.platform_data		= &sh_mmcif_platdata,
+	},
+	.num_resources	= ARRAY_SIZE(sh_mmcif_resources),
+	.resource	= sh_mmcif_resources,
+};
+
+/* SDHI */
+static struct sh_mobile_sdhi_info sdhi0_info = {
+	.tmio_flags	= TMIO_MMC_HAS_IDLE_WAIT,
+	.tmio_caps	= MMC_CAP_SD_HIGHSPEED,
+	.tmio_ocr_mask	= MMC_VDD_27_28 | MMC_VDD_28_29,
+};
+
+static struct resource sdhi0_resources[] = {
+	[0] = {
+		.name	= "SDHI0",
+		.start	= 0xee100000,
+		.end	= 0xee1000ff,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.name	= SH_MOBILE_SDHI_IRQ_CARD_DETECT,
+		.start	= gic_spi(83),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDCARD,
+		.start	= gic_spi(84),
+		.flags	= IORESOURCE_IRQ,
+	},
+	[3] = {
+		.name	= SH_MOBILE_SDHI_IRQ_SDIO,
+		.start	= gic_spi(85),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device sdhi0_device = {
+	.name		= "sh_mobile_sdhi",
+	.num_resources	= ARRAY_SIZE(sdhi0_resources),
+	.resource	= sdhi0_resources,
+	.dev	= {
+		.platform_data	= &sdhi0_info,
+	},
+};
+
+/* KEY */
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
+
+static struct gpio_keys_button gpio_buttons[] = {
+	GPIO_KEY(KEY_BACK,	GPIO_PCF8575_PORT10,	"SW3"),
+	GPIO_KEY(KEY_RIGHT,	GPIO_PCF8575_PORT11,	"SW2-R"),
+	GPIO_KEY(KEY_LEFT,	GPIO_PCF8575_PORT12,	"SW2-L"),
+	GPIO_KEY(KEY_ENTER,	GPIO_PCF8575_PORT13,	"SW2-P"),
+	GPIO_KEY(KEY_UP,	GPIO_PCF8575_PORT14,	"SW2-U"),
+	GPIO_KEY(KEY_DOWN,	GPIO_PCF8575_PORT15,	"SW2-D"),
+	GPIO_KEY(KEY_HOME,	GPIO_PCF8575_PORT16,	"SW1"),
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+	.poll_interval	= 250, /* poling at this point */
+};
+
+static struct platform_device gpio_keys_device = {
+	/* gpio-pcf857x.c driver doesn't support gpio_to_irq() */
+	.name	= "gpio-keys-polled",
+	.dev	= {
+		.platform_data  = &gpio_key_info,
+	},
+};
+
+/* I2C */
+static struct pcf857x_platform_data pcf8575_pdata = {
+	.gpio_base	= GPIO_PCF8575_BASE,
+};
+
+static struct i2c_board_info i2c1_devices[] = {
+	{
+		I2C_BOARD_INFO("st1232-ts", 0x55),
+		.irq = intcs_evt2irq(0x300), /* IRQ8 */
+	},
+};
+
+static struct i2c_board_info i2c3_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8575", 0x20),
+		.platform_data = &pcf8575_pdata,
+	},
+};
+
+static struct platform_device *kzm_devices[] __initdata = {
+	&smsc_device,
+	&usb_host_device,
+	&lcdc_device,
+	&mmc_device,
+	&sdhi0_device,
+	&gpio_keys_device,
+};
+
+/*
+ * FIXME
+ *
+ * This is quick hack for enabling LCDC backlight
+ */
+static int __init as3711_enable_lcdc_backlight(void)
+{
+	struct i2c_adapter *a = i2c_get_adapter(0);
+	struct i2c_msg msg;
+	int i, ret;
+	__u8 magic[] = {
+		0x40, 0x2a,
+		0x43, 0x3c,
+		0x44, 0x3c,
+		0x45, 0x3c,
+		0x54, 0x03,
+		0x51, 0x00,
+		0x51, 0x01,
+		0xff, 0x00, /* wait */
+		0x43, 0xf0,
+		0x44, 0xf0,
+		0x45, 0xf0,
+	};
+
+	if (!machine_is_kzm9g())
+		return 0;
+
+	if (!a)
+		return 0;
+
+	msg.addr	= 0x40;
+	msg.len		= 2;
+	msg.flags	= 0;
+
+	for (i = 0; i < ARRAY_SIZE(magic); i += 2) {
+		msg.buf = magic + i;
+
+		if (0xff == msg.buf[0]) {
+			udelay(500);
+			continue;
+		}
+
+		ret = i2c_transfer(a, &msg, 1);
+		if (ret < 0) {
+			pr_err("i2c transfer fail\n");
+			break;
+		}
+	}
+
+	return 0;
+}
+device_initcall(as3711_enable_lcdc_backlight);
+
+static void __init kzm_init(void)
+{
+	sh73a0_pinmux_init();
+
+	/* enable SCIFA4 */
+	gpio_request(GPIO_FN_SCIFA4_TXD, NULL);
+	gpio_request(GPIO_FN_SCIFA4_RXD, NULL);
+	gpio_request(GPIO_FN_SCIFA4_RTS_, NULL);
+	gpio_request(GPIO_FN_SCIFA4_CTS_, NULL);
+
+	/* CS4 for SMSC/USB */
+	gpio_request(GPIO_FN_CS4_, NULL); /* CS4 */
+
+	/* SMSC */
+	gpio_request(GPIO_PORT224, NULL); /* IRQ3 */
+	gpio_direction_input(GPIO_PORT224);
+
+	/* LCDC */
+	gpio_request(GPIO_FN_LCDD23,	NULL);
+	gpio_request(GPIO_FN_LCDD22,	NULL);
+	gpio_request(GPIO_FN_LCDD21,	NULL);
+	gpio_request(GPIO_FN_LCDD20,	NULL);
+	gpio_request(GPIO_FN_LCDD19,	NULL);
+	gpio_request(GPIO_FN_LCDD18,	NULL);
+	gpio_request(GPIO_FN_LCDD17,	NULL);
+	gpio_request(GPIO_FN_LCDD16,	NULL);
+	gpio_request(GPIO_FN_LCDD15,	NULL);
+	gpio_request(GPIO_FN_LCDD14,	NULL);
+	gpio_request(GPIO_FN_LCDD13,	NULL);
+	gpio_request(GPIO_FN_LCDD12,	NULL);
+	gpio_request(GPIO_FN_LCDD11,	NULL);
+	gpio_request(GPIO_FN_LCDD10,	NULL);
+	gpio_request(GPIO_FN_LCDD9,	NULL);
+	gpio_request(GPIO_FN_LCDD8,	NULL);
+	gpio_request(GPIO_FN_LCDD7,	NULL);
+	gpio_request(GPIO_FN_LCDD6,	NULL);
+	gpio_request(GPIO_FN_LCDD5,	NULL);
+	gpio_request(GPIO_FN_LCDD4,	NULL);
+	gpio_request(GPIO_FN_LCDD3,	NULL);
+	gpio_request(GPIO_FN_LCDD2,	NULL);
+	gpio_request(GPIO_FN_LCDD1,	NULL);
+	gpio_request(GPIO_FN_LCDD0,	NULL);
+	gpio_request(GPIO_FN_LCDDISP,	NULL);
+	gpio_request(GPIO_FN_LCDDCK,	NULL);
+
+	gpio_request(GPIO_PORT222,	NULL); /* LCDCDON */
+	gpio_request(GPIO_PORT226,	NULL); /* SC */
+	gpio_direction_output(GPIO_PORT222, 1);
+	gpio_direction_output(GPIO_PORT226, 1);
+
+	/* Touchscreen */
+	gpio_request(GPIO_PORT223, NULL); /* IRQ8 */
+	gpio_direction_input(GPIO_PORT223);
+
+	/* enable MMCIF */
+	gpio_request(GPIO_FN_MMCCLK0,		NULL);
+	gpio_request(GPIO_FN_MMCCMD0_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_0_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_1_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_2_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_3_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_4_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_5_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_6_PU,	NULL);
+	gpio_request(GPIO_FN_MMCD0_7_PU,	NULL);
+
+	/* enable SD */
+	gpio_request(GPIO_FN_SDHIWP0,		NULL);
+	gpio_request(GPIO_FN_SDHICD0,		NULL);
+	gpio_request(GPIO_FN_SDHICMD0,		NULL);
+	gpio_request(GPIO_FN_SDHICLK0,		NULL);
+	gpio_request(GPIO_FN_SDHID0_3,		NULL);
+	gpio_request(GPIO_FN_SDHID0_2,		NULL);
+	gpio_request(GPIO_FN_SDHID0_1,		NULL);
+	gpio_request(GPIO_FN_SDHID0_0,		NULL);
+	gpio_request(GPIO_FN_SDHI0_VCCQ_MC0_ON,	NULL);
+	gpio_request(GPIO_PORT15, NULL);
+	gpio_direction_output(GPIO_PORT15, 1); /* power */
+
+	/* I2C 3 */
+	gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
+	gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
+
+#ifdef CONFIG_CACHE_L2X0
+	/* Early BRESP enable, Shared attribute override enable, 64K*8way */
+	l2x0_init(IOMEM(0xf0100000), 0x40460000, 0x82000fff);
+#endif
+
+	i2c_register_board_info(1, i2c1_devices, ARRAY_SIZE(i2c1_devices));
+	i2c_register_board_info(3, i2c3_devices, ARRAY_SIZE(i2c3_devices));
+
+	sh73a0_add_standard_devices();
+	platform_add_devices(kzm_devices, ARRAY_SIZE(kzm_devices));
+}
+
+static const char *kzm9g_boards_compat_dt[] __initdata = {
+	"renesas,kzm9g",
+	NULL,
+};
+
+DT_MACHINE_START(KZM9G_DT, "kzm9g")
+	.map_io		= sh73a0_map_io,
+	.init_early	= sh73a0_add_early_devices,
+	.nr_irqs	= NR_IRQS_LEGACY,
+	.init_irq	= sh73a0_init_irq,
+	.handle_irq	= gic_handle_irq,
+	.init_machine	= kzm_init,
+	.timer		= &shmobile_timer,
+	.dt_compat	= kzm9g_boards_compat_dt,
+MACHINE_END
diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 81b54a6af20f..26eea5f21054 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -352,6 +352,7 @@ enum {
 
 	MSTP329, MSTP328, MSTP323, MSTP320,
 	MSTP314, MSTP313, MSTP312,
+	MSTP309,
 
 	MSTP416, MSTP415, MSTP407, MSTP406,
 
@@ -382,6 +383,7 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP314] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 14, 0), /* SDHI0 */
 	[MSTP313] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 13, 0), /* SDHI1 */
 	[MSTP312] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3, 12, 0), /* MMC */
+	[MSTP309] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR3,  9, 0), /* GEther */
 
 	[MSTP416] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 16, 0), /* USBHOST */
 	[MSTP415] = SH_CLK_MSTP32(&div4_clks[DIV4_HP],	SMSTPCR4, 15, 0), /* SDHI2 */
@@ -447,6 +449,7 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_DEV_ID("sh_mobile_sdhi.0",	&mstp_clks[MSTP314]),
 	CLKDEV_DEV_ID("sh_mobile_sdhi.1",	&mstp_clks[MSTP313]),
 	CLKDEV_DEV_ID("sh_mmcif",		&mstp_clks[MSTP312]),
+	CLKDEV_DEV_ID("sh-eth",			&mstp_clks[MSTP309]),
 
 	CLKDEV_DEV_ID("sh_mobile_sdhi.2",	&mstp_clks[MSTP415]),
 
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index cad57578ceed..ac758579d4e9 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -482,6 +482,9 @@ enum {
 	GPIO_FN_FSIAILR_PU,
 	GPIO_FN_FSIAIBT_PU,
 	GPIO_FN_FSIAISLD_PU,
+
+	/* end of GPIO */
+	GPIO_NR,
 };
 
 /* DMA slave IDs */
diff --git a/arch/arm/mach-shmobile/pfc-sh73a0.c b/arch/arm/mach-shmobile/pfc-sh73a0.c
index e05634ce2e0d..4a547b803268 100644
--- a/arch/arm/mach-shmobile/pfc-sh73a0.c
+++ b/arch/arm/mach-shmobile/pfc-sh73a0.c
@@ -829,14 +829,14 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(PORT27_I2C_SCL2_MARK, PORT27_FN2, MSEL2CR_MSEL17_0,
 		MSEL2CR_MSEL16_1), \
 	PINMUX_DATA(PORT27_I2C_SCL3_MARK, PORT27_FN3, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_0), \
+		MSEL2CR_MSEL18_1), \
 	PINMUX_DATA(MFG0_OUT1_MARK, PORT27_FN4), \
 	PINMUX_DATA(PORT27_IROUT_MARK, PORT27_FN7),
 	PINMUX_DATA(XDVFS2_MARK, PORT28_FN1), \
 	PINMUX_DATA(PORT28_I2C_SDA2_MARK, PORT28_FN2, MSEL2CR_MSEL17_0,
 		MSEL2CR_MSEL16_1), \
 	PINMUX_DATA(PORT28_I2C_SDA3_MARK, PORT28_FN3, MSEL2CR_MSEL19_0,
-		MSEL2CR_MSEL18_0), \
+		MSEL2CR_MSEL18_1), \
 	PINMUX_DATA(PORT28_TPU1TO1_MARK, PORT28_FN7),
 	PINMUX_DATA(SIM_RST_MARK, PORT29_FN1), \
 	PINMUX_DATA(PORT29_TPU1TO1_MARK, PORT29_FN4),
diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c
index 45fa3924c6a1..d959f07d1ef0 100644
--- a/arch/arm/mach-shmobile/platsmp.c
+++ b/arch/arm/mach-shmobile/platsmp.c
@@ -20,7 +20,7 @@
 #include <asm/mach-types.h>
 #include <mach/common.h>
 
-#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2())
+#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || machine_is_kzm9g())
 #define is_r8a7779() machine_is_marzen()
 
 static unsigned int __init shmobile_smp_get_core_count(void)
diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 34a1548dbda6..ec4eb49c1693 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -18,6 +18,7 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
  */
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
@@ -60,6 +61,12 @@ static struct map_desc r8a7740_io_desc[] __initdata = {
 void __init r8a7740_map_io(void)
 {
 	iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
+
+	/*
+	 * DMA memory at 0xff200000 - 0xffdfffff. The default 2MB size isn't
+	 * enough to allocate the frame buffer memory.
+	 */
+	init_consistent_dma_size(12 << 20);
 }
 
 /* SCIFA0 */