diff options
| author | Marek Szyprowski <m.szyprowski@samsung.com> | 2019-12-11 15:52:17 +0100 |
|---|---|---|
| committer | Maxime Ripard <maxime@cerno.tech> | 2019-12-17 09:37:14 +0100 |
| commit | 1c226017d3ec93547b58082bdf778d9db7401c95 (patch) | |
| tree | 05f3f43fd773facdc5982946f62678f412b22bbc /arch/arm | |
| parent | arm64: dts: allwinner: a64: olinuxino: Fix SDIO supply regulator (diff) | |
| download | linux-1c226017d3ec93547b58082bdf778d9db7401c95.tar.xz linux-1c226017d3ec93547b58082bdf778d9db7401c95.zip | |
ARM: dts: sun8i: a83t: Correct USB3503 GPIOs polarity
Current USB3503 driver ignores GPIO polarity and always operates as if the
GPIO lines were flagged as ACTIVE_HIGH. Fix the polarity for the existing
USB3503 chip applications to match the chip specification and common
convention for naming the pins. The only pin, which has to be ACTIVE_LOW
is the reset pin. The remaining are ACTIVE_HIGH. This change allows later
to fix the USB3503 driver to properly use generic GPIO bindings and read
polarity from DT.
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts index fb928503ad45..d9be511f054f 100644 --- a/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts +++ b/arch/arm/boot/dts/sun8i-a83t-cubietruck-plus.dts @@ -101,7 +101,7 @@ initial-mode = <1>; /* initialize in HUB mode */ disabled-ports = <1>; intn-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ - reset-gpios = <&pio 4 16 GPIO_ACTIVE_HIGH>; /* PE16 */ + reset-gpios = <&pio 4 16 GPIO_ACTIVE_LOW>; /* PE16 */ connect-gpios = <&pio 4 17 GPIO_ACTIVE_HIGH>; /* PE17 */ refclk-frequency = <19200000>; }; |