Merge tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt

From Shawn Guo:

mxs device tree changes for 3.11:

* A couple of new board support, cfa10055 and cfa10057
* A few updates on cfa10036 device tree source
* Some auart pinctrl data addition
* Adopt soc bus infrastructure for mach-mxs

* tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree
  ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree
  ARM: cfa10049: Switch the chip select pin of the LCD controller
  ARM: cfa10036: Add USB0 OTG port
  ARM: dts: apf28dev: Add touchscreen support for APF28dev
  ARM: mxs: Fix UARTs on M28EVK
  ARM: cfa10036: dt: Change i2c0 clock frequency
  ARM: dts: cfa10036: Change the OLED display to SSD1306
  ARM: mx28: add auart4 2 pins pinmux to imx28.dtsi
  ARM: mx28: add auart3 2 pins pinmux to imx28.dtsi
  ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi
  ARM: mxs: Use soc bus infrastructure
  ARM: dts: mx28: Adjust the digctl compatible string
  ARM: mxs: Remove init_irq declaration in machine description

Includes an update to 3.10-rc6

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

30 files changed, 714 insertions, 59 deletions

diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 3580d57ea218..79e9bdbfc491 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -124,7 +124,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
 ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all -DZIMAGE
+asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
 KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \
diff --git a/arch/arm/boot/compressed/debug.S b/arch/arm/boot/compressed/debug.S
index 6e8382d5b7a4..5392ee63338f 100644
--- a/arch/arm/boot/compressed/debug.S
+++ b/arch/arm/boot/compressed/debug.S
@@ -1,6 +1,8 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+#ifndef CONFIG_DEBUG_SEMIHOSTING
+
 #include CONFIG_DEBUG_LL_INCLUDE
 
 ENTRY(putc)
@@ -10,3 +12,29 @@ ENTRY(putc)
 	busyuart r3, r1
 	mov	 pc, lr
 ENDPROC(putc)
+
+#else
+
+ENTRY(putc)
+	adr	r1, 1f
+	ldmia	r1, {r2, r3}
+	add	r2, r2, r1
+	ldr	r1, [r2, r3]
+	strb	r0, [r1]
+	mov	r0, #0x03		@ SYS_WRITEC
+   ARM(	svc	#0x123456	)
+ THUMB(	svc	#0xab		)
+	mov	pc, lr
+	.align	2
+1:	.word	_GLOBAL_OFFSET_TABLE_ - .
+	.word	semi_writec_buf(GOT)
+ENDPROC(putc)
+
+	.bss
+	.global	semi_writec_buf
+	.type   semi_writec_buf, %object
+semi_writec_buf:
+	.space	4
+	.size	semi_writec_buf, 4
+
+#endif
diff --git a/arch/arm/boot/compressed/head-sa1100.S b/arch/arm/boot/compressed/head-sa1100.S
index 6179d94dd5c6..3115e313d9f6 100644
--- a/arch/arm/boot/compressed/head-sa1100.S
+++ b/arch/arm/boot/compressed/head-sa1100.S
@@ -11,6 +11,7 @@
 #include <asm/mach-types.h>
 
 		.section        ".start", "ax"
+		.arch	armv4
 
 __SA1100_start:
 
diff --git a/arch/arm/boot/compressed/head-shark.S b/arch/arm/boot/compressed/head-shark.S
index 089c560e07f1..92b56897ed64 100644
--- a/arch/arm/boot/compressed/head-shark.S
+++ b/arch/arm/boot/compressed/head-shark.S
@@ -18,6 +18,7 @@
 	
 		.section	".start", "ax"
 
+		.arch armv4
 		b	__beginning
 	
 __ofw_data:	.long	0				@ the number of memory blocks
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fe4d9c3ad761..032a8d987148 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -11,6 +11,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+	.arch	armv7-a
 /*
  * Debugging stuff
  *
@@ -805,8 +806,8 @@ call_cache_fn:	adr	r12, proc_types
 		.align	2
 		.type	proc_types,#object
 proc_types:
-		.word	0x00000000		@ old ARM ID
-		.word	0x0000f000
+		.word	0x41000000		@ old ARM ID
+		.word	0xff00f000
 		mov	pc, lr
  THUMB(		nop				)
 		mov	pc, lr
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4c904a8e458a..6ef71f4d5738 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -134,6 +134,8 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
 	imx28-cfa10036.dtb \
 	imx28-cfa10037.dtb \
 	imx28-cfa10049.dtb \
+	imx28-cfa10055.dtb \
+	imx28-cfa10057.dtb \
 	imx28-evk.dtb \
 	imx28-m28evk.dtb \
 	imx28-sps1.dtb \
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 6827853a0a8f..27c99c106620 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -413,8 +413,8 @@
 			ti,hwmods = "gpmc";
 			reg = <0x50000000 0x2000>;
 			interrupts = <100>;
-			num-cs = <7>;
-			num-waitpins = <2>;
+			gpmc,num-cs = <7>;
+			gpmc,num-waitpins = <2>;
 			#address-cells = <2>;
 			#size-cells = <1>;
 			status = "disabled";
diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts
index 0a040705a72d..c87b2de29c30 100644
--- a/arch/arm/boot/dts/armada-xp-gp.dts
+++ b/arch/arm/boot/dts/armada-xp-gp.dts
@@ -39,8 +39,9 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000
-			  0xf0000000 0 0xf0000000 0x1000000>;
+		ranges = <0          0 0xd0000000 0x100000  /* Internal registers 1MiB */
+			  0xe0000000 0 0xe0000000 0x8100000 /* PCIe */
+			  0xf0000000 0 0xf0000000 0x1000000 /* Device Bus, NOR 16MiB  */>;
 
 		internal-regs {
 			serial@12000 {
diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
index 685ee7a282e3..8f510458ea86 100644
--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
@@ -27,8 +27,9 @@
 	};
 
 	soc {
-		ranges = <0          0 0xd0000000 0x100000
-			  0xf0000000 0 0xf0000000 0x8000000>;
+		ranges = <0          0 0xd0000000 0x100000	/* Internal registers 1MiB */
+			  0xe0000000 0 0xe0000000 0x8100000     /* PCIe */
+			  0xf0000000 0 0xf0000000 0x8000000     /* Device Bus, NOR 128MiB   */>;
 
 		internal-regs {
 			serial@12000 {
diff --git a/arch/arm/boot/dts/imx28-apf28dev.dts b/arch/arm/boot/dts/imx28-apf28dev.dts
index 3d905d16cbec..b602494c152b 100644
--- a/arch/arm/boot/dts/imx28-apf28dev.dts
+++ b/arch/arm/boot/dts/imx28-apf28dev.dts
@@ -103,6 +103,7 @@
 
 		apbx@80040000 {
 			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
 				status = "okay";
 			};
 
diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts
index 1594694532b9..94c4476972c3 100644
--- a/arch/arm/boot/dts/imx28-cfa10036.dts
+++ b/arch/arm/boot/dts/imx28-cfa10036.dts
@@ -45,6 +45,17 @@
 					fsl,voltage = <1>;
 					fsl,pull-up = <0>;
 				};
+
+				usb0_otg_cfa10036: otg-10036@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0142 /* MX28_PAD_GPMI_READY0__USB0_ID */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 			};
 
 			ssp0: ssp@80010000 {
@@ -58,12 +69,6 @@
 		};
 
 		apbx@80040000 {
-			pwm: pwm@80064000 {
-				pinctrl-names = "default";
-				pinctrl-0 = <&pwm4_pins_a>;
-				status = "okay";
-			};
-
 			duart: serial@80074000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&duart_pins_b>;
@@ -73,15 +78,30 @@
 			i2c0: i2c@80058000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&i2c0_pins_b>;
+				clock-frequency = <400000>;
 				status = "okay";
 
-				ssd1307: oled@3c {
-					compatible = "solomon,ssd1307fb-i2c";
+				ssd1306: oled@3c {
+					compatible = "solomon,ssd1306fb-i2c";
 					reg = <0x3c>;
-					pwms = <&pwm 4 3000>;
 					reset-gpios = <&gpio2 7 0>;
+					solomon,height = <32>;
+					solomon,width = <128>;
+					solomon,page-offset = <0>;
 				};
 			};
+
+			usbphy0: usbphy@8007c000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb0: usb@80080000 {
+			pinctrl-names = "default";
+			pinctrl-0 = <&usb0_otg_cfa10036>;
+			status = "okay";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts
index 063e62059890..04b2f769ffbd 100644
--- a/arch/arm/boot/dts/imx28-cfa10049.dts
+++ b/arch/arm/boot/dts/imx28-cfa10049.dts
@@ -33,7 +33,7 @@
 						0x1163 /* MX28_PAD_LCD_D22__GPIO_1_22 */
 						0x1173 /* MX28_PAD_LCD_D22__GPIO_1_23 */
 						0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */
-						0x3173 /* MX28_PAD_LCD_RESET__GPIO_3_23 */
+						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
 					>;
 					fsl,drive-strength = <0>;
 					fsl,voltage = <1>;
@@ -166,8 +166,8 @@
 
 		apbx@80040000 {
 			pwm: pwm@80064000 {
-				pinctrl-names = "default", "default";
-				pinctrl-1 = <&pwm3_pins_b>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
 				status = "okay";
 			};
 
@@ -265,7 +265,7 @@
 		gpio-sck = <&gpio2 16 0>;
 		gpio-mosi = <&gpio2 17 0>;
 		gpio-miso = <&gpio2 18 0>;
-		cs-gpios = <&gpio3 23 0>;
+		cs-gpios = <&gpio3 5 0>;
 		num-chipselects = <1>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/imx28-cfa10055.dts b/arch/arm/boot/dts/imx28-cfa10055.dts
new file mode 100644
index 000000000000..158111244122
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10055.dts
@@ -0,0 +1,179 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * 				  Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10055 is an expansion board for the CFA-10036 module and
+ * CFA-10037, thus we need to include the CFA-10037 DTS.
+ */
+/include/ "imx28-cfa10037.dts"
+
+/ {
+	model = "Crystalfontz CFA-10055 Board";
+	compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default", "default";
+				pinctrl-1 = <&hog_pins_cfa10055
+					&hog_pins_cfa10055_pullup>;
+
+				hog_pins_cfa10055: hog-10055@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				spi2_pins_cfa10055: spi2-cfa10055@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
+						0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
+						0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
+					>;
+					fsl,drive-strength = <1>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				lcdif_pins_cfa10055: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_18bit_pins_cfa10055
+					     &lcdif_pins_cfa10055>;
+				display = <&display>;
+				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <9216000>;
+							hactive = <320>;
+							vactive = <480>;
+							hback-porch = <2>;
+							hfront-porch = <2>;
+							vback-porch = <2>;
+							vfront-porch = <2>;
+							hsync-len = <15>;
+							vsync-len = <15>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+		};
+	};
+
+	spi2 {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&spi2_pins_cfa10055>;
+		status = "okay";
+		gpio-sck = <&gpio2 16 0>;
+		gpio-mosi = <&gpio2 17 0>;
+		gpio-miso = <&gpio2 18 0>;
+		cs-gpios = <&gpio3 5 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hx8357: hx8357@0 {
+			compatible = "himax,hx8357b", "himax,hx8357";
+			reg = <0>;
+			spi-max-frequency = <100000>;
+			spi-cpol;
+			spi-cpha;
+			gpios-reset = <&gpio3 30 0>;
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <6>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-cfa10057.dts b/arch/arm/boot/dts/imx28-cfa10057.dts
new file mode 100644
index 000000000000..2da713cdb42a
--- /dev/null
+++ b/arch/arm/boot/dts/imx28-cfa10057.dts
@@ -0,0 +1,191 @@
+/*
+ * Copyright 2013 Crystalfontz America, Inc.
+ * Copyright 2012 Free Electrons
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/*
+ * The CFA-10057 is an expansion board for the CFA-10036 module, thus we
+ * need to include the CFA-10036 DTS.
+ */
+/include/ "imx28-cfa10036.dts"
+
+/ {
+	model = "Crystalfontz CFA-10057 Board";
+	compatible = "crystalfontz,cfa10057", "crystalfontz,cfa10036", "fsl,imx28";
+
+	apb@80000000 {
+		apbh@80000000 {
+			pinctrl@80018000 {
+				pinctrl-names = "default", "default";
+				pinctrl-1 = <&hog_pins_cfa10057
+					&hog_pins_cfa10057_pullup>;
+
+				hog_pins_cfa10057: hog-10057@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */
+						0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				hog_pins_cfa10057_pullup: hog-10057-pullup@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2133 /* MX28_PAD_SSP2_D3__GPIO_2_19 */
+						0x3183 /* MX28_PAD_I2C0_SCL__GPIO_3_24 */
+						0x3193 /* MX28_PAD_I2C0_SDA__GPIO_3_25 */
+						0x31a3 /* MX28_PAD_SAIF_SDATA0__GPIO_3_26 */
+						0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <1>;
+				};
+
+				lcdif_18bit_pins_cfa10057: lcdif-18bit@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
+						0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
+						0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
+						0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
+						0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
+						0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
+						0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
+						0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
+						0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
+						0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
+						0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
+						0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
+						0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
+						0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
+						0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
+						0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
+						0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
+						0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				lcdif_pins_cfa10057: lcdif-evk@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
+						0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
+						0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
+						0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+			};
+
+			lcdif@80030000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&lcdif_18bit_pins_cfa10057
+					     &lcdif_pins_cfa10057>;
+				display = <&display>;
+				status = "okay";
+
+				display: display {
+					bits-per-pixel = <32>;
+					bus-width = <18>;
+
+					display-timings {
+						native-mode = <&timing0>;
+						timing0: timing0 {
+							clock-frequency = <30000000>;
+							hactive = <480>;
+							vactive = <800>;
+							hfront-porch = <12>;
+							hback-porch = <2>;
+							vfront-porch = <5>;
+							vback-porch = <3>;
+							hsync-len = <2>;
+							vsync-len = <2>;
+							hsync-active = <0>;
+							vsync-active = <0>;
+							de-active = <1>;
+							pixelclk-active = <1>;
+						};
+					};
+				};
+			};
+		};
+
+		apbx@80040000 {
+			lradc@80050000 {
+				fsl,lradc-touchscreen-wires = <4>;
+				status = "okay";
+			};
+
+			pwm: pwm@80064000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pwm3_pins_b>;
+				status = "okay";
+			};
+
+			i2c1: i2c@8005a000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&i2c1_pins_a>;
+				status = "okay";
+			};
+
+			usbphy1: usbphy@8007e000 {
+				status = "okay";
+			};
+		};
+	};
+
+	ahb@80080000 {
+		usb1: usb@80090000 {
+			vbus-supply = <&reg_usb1_vbus>;
+			pinctrl-0 = <&usbphy1_pins_a>;
+			pinctrl-names = "default";
+			status = "okay";
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+
+		reg_usb1_vbus: usb1_vbus {
+			compatible = "regulator-fixed";
+			regulator-name = "usb1_vbus";
+			regulator-min-microvolt = <5000000>;
+			regulator-max-microvolt = <5000000>;
+			gpio = <&gpio0 7 1>;
+		};
+	};
+
+	ahb@80080000 {
+		mac0: ethernet@800f0000 {
+			phy-mode = "rmii";
+			pinctrl-names = "default";
+			pinctrl-0 = <&mac0_pins_a>;
+			phy-reset-gpios = <&gpio2 21 0>;
+			phy-reset-duration = <100>;
+			status = "okay";
+		};
+	};
+
+	backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm 3 5000000>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+	};
+};
diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts
index 5aa44e05c9f5..880df2f13be8 100644
--- a/arch/arm/boot/dts/imx28-m28evk.dts
+++ b/arch/arm/boot/dts/imx28-m28evk.dts
@@ -220,7 +220,19 @@
 
 			auart0: serial@8006a000 {
 				pinctrl-names = "default";
-				pinctrl-0 = <&auart0_2pins_a>;
+				pinctrl-0 = <&auart0_pins_a>;
+				status = "okay";
+			};
+
+			auart1: serial@8006c000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart1_pins_a>;
+				status = "okay";
+			};
+
+			auart2: serial@8006e000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&auart2_2pins_b>;
 				status = "okay";
 			};
 		};
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 4c10a1968c0e..195451bf7706 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -334,6 +334,17 @@
 					fsl,pull-up = <0>;
 				};
 
+				auart2_2pins_b: auart2-2pins@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x3080 /* MX28_PAD_AUART2_RX__AUART2_RX */
+						0x3090 /* MX28_PAD_AUART2_TX__AUART2_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				auart3_pins_a: auart3@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -358,6 +369,28 @@
 					fsl,pull-up = <0>;
 				};
 
+				auart3_2pins_b: auart3-2pins@1 {
+					reg = <1>;
+					fsl,pinmux-ids = <
+						0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */
+						0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
+				auart4_2pins_a: auart4@0 {
+					reg = <0>;
+					fsl,pinmux-ids = <
+						0x2181 /* MX28_PAD_SSP3_SCK__AUART4_TX */
+						0x2191 /* MX28_PAD_SSP3_MOSI__AUART4_RX */
+					>;
+					fsl,drive-strength = <0>;
+					fsl,voltage = <1>;
+					fsl,pull-up = <0>;
+				};
+
 				mac0_pins_a: mac0@0 {
 					reg = <0>;
 					fsl,pinmux-ids = <
@@ -673,7 +706,7 @@
 			};
 
 			digctl@8001c000 {
-				compatible = "fsl,imx28-digctl";
+				compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 				reg = <0x8001c000 0x2000>;
 				interrupts = <89>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 03bd60deb52b..eeb734e25709 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -56,9 +56,23 @@
 	};
 };
 
+&omap4_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&twl6030_wkup_pins
+	>;
+
+	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+		pinctrl-single,pins = <
+			0x14 0x2        /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+		>;
+	};
+};
+
 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
+			&twl6030_pins
 			&twl6040_pins
 			&mcpdm_pins
 			&mcbsp1_pins
@@ -66,6 +80,12 @@
 			&tpd12s015_pins
 	>;
 
+	twl6030_pins: pinmux_twl6030_pins {
+		pinctrl-single,pins = <
+			0x15e 0x4118	/* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+		>;
+	};
+
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
 			0xe0 0x3	/* hdq_sio.gpio_127 OUTPUT | MODE3 */
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index a35d9cd58063..98505a2ef162 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -142,9 +142,23 @@
 	};
 };
 
+&omap4_pmx_wkup {
+	pinctrl-names = "default";
+	pinctrl-0 = <
+			&twl6030_wkup_pins
+	>;
+
+	twl6030_wkup_pins: pinmux_twl6030_wkup_pins {
+		pinctrl-single,pins = <
+			0x14 0x2        /* fref_clk0_out.sys_drm_msecure OUTPUT | MODE2 */
+		>;
+	};
+};
+
 &omap4_pmx_core {
 	pinctrl-names = "default";
 	pinctrl-0 = <
+			&twl6030_pins
 			&twl6040_pins
 			&mcpdm_pins
 			&dmic_pins
@@ -179,6 +193,12 @@
 		>;
 	};
 
+	twl6030_pins: pinmux_twl6030_pins {
+		pinctrl-single,pins = <
+			0x15e 0x4118	/* sys_nirq1.sys_nirq1 OMAP_WAKEUP_EN | INPUT_PULLUP | MODE0 */
+		>;
+	};
+
 	twl6040_pins: pinmux_twl6040_pins {
 		pinctrl-single,pins = <
 			0xe0 0x3	/* hdq_sio.gpio_127 OUTPUT | MODE3 */
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 35a6536a10b5..9e8083ff6cd2 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -545,6 +545,7 @@
 			interrupts = <0 41 0x4>;
 			ti,hwmods = "timer5";
 			ti,timer-dsp;
+			ti,timer-pwm;
 		};
 
 		timer6: timer@4013a000 {
@@ -581,6 +582,7 @@
 			reg = <0x4803e000 0x80>;
 			interrupts = <0 45 0x4>;
 			ti,hwmods = "timer9";
+			ti,timer-pwm;
 		};
 
 		timer10: timer@48086000 {
@@ -588,6 +590,7 @@
 			reg = <0x48086000 0x80>;
 			interrupts = <0 46 0x4>;
 			ti,hwmods = "timer10";
+			ti,timer-pwm;
 		};
 
 		timer11: timer@48088000 {
diff --git a/arch/arm/include/asm/percpu.h b/arch/arm/include/asm/percpu.h
index 968c0a14e0a3..209e6504922e 100644
--- a/arch/arm/include/asm/percpu.h
+++ b/arch/arm/include/asm/percpu.h
@@ -30,8 +30,15 @@ static inline void set_my_cpu_offset(unsigned long off)
 static inline unsigned long __my_cpu_offset(void)
 {
 	unsigned long off;
-	/* Read TPIDRPRW */
-	asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory");
+	register unsigned long *sp asm ("sp");
+
+	/*
+	 * Read TPIDRPRW.
+	 * We want to allow caching the value, so avoid using volatile and
+	 * instead use a fake stack read to hazard against barrier().
+	 */
+	asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : "Q" (*sp));
+
 	return off;
 }
 #define __my_cpu_offset __my_cpu_offset()
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index f10316b4ecdc..c5a59546a256 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -13,6 +13,7 @@
 
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/percpu.h>
 #include <linux/node.h>
@@ -200,6 +201,7 @@ static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {}
  * cpu topology table
  */
 struct cputopo_arm cpu_topology[NR_CPUS];
+EXPORT_SYMBOL_GPL(cpu_topology);
 
 const struct cpumask *cpu_coregroup_mask(int cpu)
 {
diff --git a/arch/arm/mach-kirkwood/mpp.c b/arch/arm/mach-kirkwood/mpp.c
index 827cde42414f..e96fd71abd76 100644
--- a/arch/arm/mach-kirkwood/mpp.c
+++ b/arch/arm/mach-kirkwood/mpp.c
@@ -22,9 +22,10 @@ static unsigned int __init kirkwood_variant(void)
 
 	kirkwood_pcie_id(&dev, &rev);
 
-	if ((dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0) ||
-	    (dev == MV88F6282_DEV_ID))
+	if (dev == MV88F6281_DEV_ID && rev >= MV88F6281_REV_A0)
 		return MPP_F6281_MASK;
+	if (dev == MV88F6282_DEV_ID)
+		return MPP_F6282_MASK;
 	if (dev == MV88F6192_DEV_ID && rev >= MV88F6192_REV_A0)
 		return MPP_F6192_MASK;
 	if (dev == MV88F6180_DEV_ID)
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index 4dc2fbba0ecd..59c30ef56790 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -25,6 +25,7 @@ config ARCH_MXS
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK_PREPARE
 	select PINCTRL
+	select SOC_BUS
 	select SOC_IMX23
 	select SOC_IMX28
 	select STMP_DEVICE
diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c
index 5b62b6489d4b..ba227cb2c93b 100644
--- a/arch/arm/mach-mxs/mach-mxs.c
+++ b/arch/arm/mach-mxs/mach-mxs.c
@@ -19,13 +19,13 @@
 #include <linux/err.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
-#include <linux/irqchip.h>
 #include <linux/irqchip/mxs.h>
 #include <linux/micrel_phy.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/phy.h>
 #include <linux/pinctrl/consumer.h>
+#include <linux/sys_soc.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -39,12 +39,28 @@
 #define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR0		0x2
 #define MXS_DIGCTL_SAIF_CLKMUX_EXTMSTR1		0x3
 
+#define HW_DIGCTL_CHIPID	0x310
+#define HW_DIGCTL_CHIPID_MASK	(0xffff << 16)
+#define HW_DIGCTL_REV_MASK	0xff
+#define HW_DIGCTL_CHIPID_MX23	(0x3780 << 16)
+#define HW_DIGCTL_CHIPID_MX28	(0x2800 << 16)
+
+#define MXS_CHIP_REVISION_1_0	0x10
+#define MXS_CHIP_REVISION_1_1	0x11
+#define MXS_CHIP_REVISION_1_2	0x12
+#define MXS_CHIP_REVISION_1_3	0x13
+#define MXS_CHIP_REVISION_1_4	0x14
+#define MXS_CHIP_REV_UNKNOWN	0xff
+
 #define MXS_GPIO_NR(bank, nr)	((bank) * 32 + (nr))
 
 #define MXS_SET_ADDR		0x4
 #define MXS_CLR_ADDR		0x8
 #define MXS_TOG_ADDR		0xc
 
+static u32 chipid;
+static u32 socid;
+
 static inline void __mxs_setl(u32 mask, void __iomem *reg)
 {
 	__raw_writel(mask, reg + MXS_SET_ADDR);
@@ -352,29 +368,123 @@ static void __init tx28_post_init(void)
 	pinctrl_put(pctl);
 }
 
-static void __init cfa10049_init(void)
+static void __init crystalfontz_init(void)
 {
 	update_fec_mac_prop(OUI_CRYSTALFONTZ);
 }
 
-static void __init cfa10037_init(void)
+static const char __init *mxs_get_soc_id(void)
 {
-	update_fec_mac_prop(OUI_CRYSTALFONTZ);
+	struct device_node *np;
+	void __iomem *digctl_base;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,imx23-digctl");
+	digctl_base = of_iomap(np, 0);
+	WARN_ON(!digctl_base);
+
+	chipid = readl(digctl_base + HW_DIGCTL_CHIPID);
+	socid = chipid & HW_DIGCTL_CHIPID_MASK;
+
+	iounmap(digctl_base);
+	of_node_put(np);
+
+	switch (socid) {
+	case HW_DIGCTL_CHIPID_MX23:
+		return "i.MX23";
+	case HW_DIGCTL_CHIPID_MX28:
+		return "i.MX28";
+	default:
+		return "Unknown";
+	}
+}
+
+static u32 __init mxs_get_cpu_rev(void)
+{
+	u32 rev = chipid & HW_DIGCTL_REV_MASK;
+
+	switch (socid) {
+	case HW_DIGCTL_CHIPID_MX23:
+		switch (rev) {
+		case 0x0:
+			return MXS_CHIP_REVISION_1_0;
+		case 0x1:
+			return MXS_CHIP_REVISION_1_1;
+		case 0x2:
+			return MXS_CHIP_REVISION_1_2;
+		case 0x3:
+			return MXS_CHIP_REVISION_1_3;
+		case 0x4:
+			return MXS_CHIP_REVISION_1_4;
+		default:
+			return MXS_CHIP_REV_UNKNOWN;
+		}
+	case HW_DIGCTL_CHIPID_MX28:
+		switch (rev) {
+		case 0x0:
+			return MXS_CHIP_REVISION_1_1;
+		case 0x1:
+			return MXS_CHIP_REVISION_1_2;
+		default:
+			return MXS_CHIP_REV_UNKNOWN;
+		}
+	default:
+		return MXS_CHIP_REV_UNKNOWN;
+	}
+}
+
+static const char __init *mxs_get_revision(void)
+{
+	u32 rev = mxs_get_cpu_rev();
+
+	if (rev != MXS_CHIP_REV_UNKNOWN)
+		return kasprintf(GFP_KERNEL, "TO%d.%d", (rev >> 4) & 0xf,
+				rev & 0xf);
+	else
+		return kasprintf(GFP_KERNEL, "%s", "Unknown");
 }
 
 static void __init mxs_machine_init(void)
 {
+	struct device_node *root;
+	struct device *parent;
+	struct soc_device *soc_dev;
+	struct soc_device_attribute *soc_dev_attr;
+	int ret;
+
+	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+	if (!soc_dev_attr)
+		return;
+
+	root = of_find_node_by_path("/");
+	ret = of_property_read_string(root, "model", &soc_dev_attr->machine);
+	if (ret)
+		return;
+
+	soc_dev_attr->family = "Freescale MXS Family";
+	soc_dev_attr->soc_id = mxs_get_soc_id();
+	soc_dev_attr->revision = mxs_get_revision();
+
+	soc_dev = soc_device_register(soc_dev_attr);
+	if (IS_ERR(soc_dev)) {
+		kfree(soc_dev_attr->revision);
+		kfree(soc_dev_attr);
+		return;
+	}
+
+	parent = soc_device_to_device(soc_dev);
+
 	if (of_machine_is_compatible("fsl,imx28-evk"))
 		imx28_evk_init();
 	else if (of_machine_is_compatible("bluegiga,apx4devkit"))
 		apx4devkit_init();
-	else if (of_machine_is_compatible("crystalfontz,cfa10037"))
-		cfa10037_init();
-	else if (of_machine_is_compatible("crystalfontz,cfa10049"))
-		cfa10049_init();
+	else if (of_machine_is_compatible("crystalfontz,cfa10037") ||
+		 of_machine_is_compatible("crystalfontz,cfa10049") ||
+		 of_machine_is_compatible("crystalfontz,cfa10055") ||
+		 of_machine_is_compatible("crystalfontz,cfa10057"))
+		crystalfontz_init();
 
 	of_platform_populate(NULL, of_default_bus_match_table,
-			     mxs_auxdata_lookup, NULL);
+			     mxs_auxdata_lookup, parent);
 
 	if (of_machine_is_compatible("karo,tx28"))
 		tx28_post_init();
@@ -435,7 +545,6 @@ static const char *mxs_dt_compat[] __initdata = {
 
 DT_MACHINE_START(MXS, "Freescale MXS (Device Tree)")
 	.map_io		= debug_ll_io_init,
-	.init_irq	= irqchip_init,
 	.handle_irq	= icoll_handle_irq,
 	.init_time	= mxs_timer_init,
 	.init_machine	= mxs_machine_init,
diff --git a/arch/arm/mach-omap2/clock36xx.c b/arch/arm/mach-omap2/clock36xx.c
index 8f3bf4e50908..bbd6a3f717e6 100644
--- a/arch/arm/mach-omap2/clock36xx.c
+++ b/arch/arm/mach-omap2/clock36xx.c
@@ -20,11 +20,12 @@
 
 #include <linux/kernel.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/io.h>
 
 #include "clock.h"
 #include "clock36xx.h"
-
+#define to_clk_divider(_hw) container_of(_hw, struct clk_divider, hw)
 
 /**
  * omap36xx_pwrdn_clk_enable_with_hsdiv_restore - enable clocks suffering
@@ -39,29 +40,28 @@
  */
 int omap36xx_pwrdn_clk_enable_with_hsdiv_restore(struct clk_hw *clk)
 {
-	struct clk_hw_omap *parent;
+	struct clk_divider *parent;
 	struct clk_hw *parent_hw;
-	u32 dummy_v, orig_v, clksel_shift;
+	u32 dummy_v, orig_v;
 	int ret;
 
 	/* Clear PWRDN bit of HSDIVIDER */
 	ret = omap2_dflt_clk_enable(clk);
 
 	parent_hw = __clk_get_hw(__clk_get_parent(clk->clk));
-	parent = to_clk_hw_omap(parent_hw);
+	parent = to_clk_divider(parent_hw);
 
 	/* Restore the dividers */
 	if (!ret) {
-		clksel_shift = __ffs(parent->clksel_mask);
-		orig_v = __raw_readl(parent->clksel_reg);
+		orig_v = __raw_readl(parent->reg);
 		dummy_v = orig_v;
 
 		/* Write any other value different from the Read value */
-		dummy_v ^= (1 << clksel_shift);
-		__raw_writel(dummy_v, parent->clksel_reg);
+		dummy_v ^= (1 << parent->shift);
+		__raw_writel(dummy_v, parent->reg);
 
 		/* Write the original divider */
-		__raw_writel(orig_v, parent->clksel_reg);
+		__raw_writel(orig_v, parent->reg);
 	}
 
 	return ret;
diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
index 075f7cc51026..69337af748cc 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -2007,6 +2007,13 @@ static struct omap_hwmod am33xx_uart1_hwmod = {
 	},
 };
 
+/* uart2 */
+static struct omap_hwmod_dma_info uart2_edma_reqs[] = {
+	{ .name = "tx",	.dma_req = 28, },
+	{ .name = "rx",	.dma_req = 29, },
+	{ .dma_req = -1 }
+};
+
 static struct omap_hwmod_irq_info am33xx_uart2_irqs[] = {
 	{ .irq = 73 + OMAP_INTC_START, },
 	{ .irq = -1 },
@@ -2018,7 +2025,7 @@ static struct omap_hwmod am33xx_uart2_hwmod = {
 	.clkdm_name	= "l4ls_clkdm",
 	.flags		= HWMOD_SWSUP_SIDLE_ACT,
 	.mpu_irqs	= am33xx_uart2_irqs,
-	.sdma_reqs	= uart1_edma_reqs,
+	.sdma_reqs	= uart2_edma_reqs,
 	.main_clk	= "dpll_per_m2_div4_ck",
 	.prcm		= {
 		.omap4	= {
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index c01859398b54..5a2d8034c8de 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -546,8 +546,10 @@ static void __init prcm_setup_regs(void)
 	/* Clear any pending PRCM interrupts */
 	omap2_prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-	if (omap3_has_iva())
-		omap3_iva_idle();
+	/*
+	 * We need to idle iva2_pwrdm even on am3703 with no iva2.
+	 */
+	omap3_iva_idle();
 
 	omap3_d2d_idle();
 }
diff --git a/arch/arm/mach-prima2/pm.c b/arch/arm/mach-prima2/pm.c
index 9936c180bf01..8f595c0cc8d9 100644
--- a/arch/arm/mach-prima2/pm.c
+++ b/arch/arm/mach-prima2/pm.c
@@ -101,8 +101,10 @@ static int __init sirfsoc_of_pwrc_init(void)
 	struct device_node *np;
 
 	np = of_find_matching_node(NULL, pwrc_ids);
-	if (!np)
-		panic("unable to find compatible pwrc node in dtb\n");
+	if (!np) {
+		pr_err("unable to find compatible sirf pwrc node in dtb\n");
+		return -ENOENT;
+	}
 
 	/*
 	 * pwrc behind rtciobrg is not located in memory space
diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c
index 435019ca0a48..d5e0cbc934c0 100644
--- a/arch/arm/mach-prima2/rstc.c
+++ b/arch/arm/mach-prima2/rstc.c
@@ -28,8 +28,10 @@ static int __init sirfsoc_of_rstc_init(void)
 	struct device_node *np;
 
 	np = of_find_matching_node(NULL, rstc_ids);
-	if (!np)
-		panic("unable to find compatible rstc node in dtb\n");
+	if (!np) {
+		pr_err("unable to find compatible sirf rstc node in dtb\n");
+		return -ENOENT;
+	}
 
 	sirfsoc_rstc_base = of_iomap(np, 0);
 	if (!sirfsoc_rstc_base)
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 53210ec4e8ec..bd7124c87fea 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -16,6 +16,7 @@
 #include <linux/suspend.h>
 #include <linux/errno.h>
 #include <linux/delay.h>
+#include <linux/of.h>
 #include <linux/serial_core.h>
 #include <linux/io.h>
 
@@ -261,7 +262,8 @@ static int s3c_pm_enter(suspend_state_t state)
 	 * require a full power-cycle)
 	*/
 
-	if (!any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
+	if (!of_have_populated_dt() &&
+	    !any_allowed(s3c_irqwake_intmask, s3c_irqwake_intallow) &&
 	    !any_allowed(s3c_irqwake_eintmask, s3c_irqwake_eintallow)) {
 		printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
 		printk(KERN_ERR "%s: Aborting sleep\n", __func__);
@@ -270,8 +272,11 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	/* save all necessary core registers not covered by the drivers */
 
-	samsung_pm_save_gpios();
-	samsung_pm_saved_gpios();
+	if (!of_have_populated_dt()) {
+		samsung_pm_save_gpios();
+		samsung_pm_saved_gpios();
+	}
+
 	s3c_pm_save_uarts();
 	s3c_pm_save_core();
 
@@ -310,8 +315,11 @@ static int s3c_pm_enter(suspend_state_t state)
 
 	s3c_pm_restore_core();
 	s3c_pm_restore_uarts();
-	samsung_pm_restore_gpios();
-	s3c_pm_restored_gpios();
+
+	if (!of_have_populated_dt()) {
+		samsung_pm_restore_gpios();
+		s3c_pm_restored_gpios();
+	}
 
 	s3c_pm_debug_init();