ARM: at91/aic: add irq domain and device tree support

Add an irqdomain for the AIC interrupt controller.
The device tree support is mapping the registers and
is using the irq_domain_add_legacy() to manage hwirq
translation.
The documentation is describing the meaning of the
two cells required for using this "interrupt-controller"
in a device tree node.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>

4 files changed, 79 insertions, 30 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 92c9c79c140c..cabd8f556a1f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -322,6 +322,7 @@ config ARCH_AT91
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
+	select IRQ_DOMAIN
 	help
 	  This enables support for systems based on the Atmel AT91RM9200,
 	  AT91SAM9 processors.
diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi
index 07603b8c9503..9a0aee791a40 100644
--- a/arch/arm/boot/dts/at91sam9g20.dtsi
+++ b/arch/arm/boot/dts/at91sam9g20.dtsi
@@ -47,7 +47,7 @@
 			ranges;
 
 			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
 				interrupt-parent;
@@ -57,14 +57,14 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
-				interrupts = <1>;
+				interrupts = <1 4>;
 				status = "disabled";
 			};
 
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
-				interrupts = <6>;
+				interrupts = <6 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -73,7 +73,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
-				interrupts = <7>;
+				interrupts = <7 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -82,7 +82,7 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
-				interrupts = <8>;
+				interrupts = <8 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -91,7 +91,7 @@
 			usart3: serial@fffd0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd0000 0x200>;
-				interrupts = <23>;
+				interrupts = <23 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -100,7 +100,7 @@
 			usart4: serial@fffd4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd4000 0x200>;
-				interrupts = <24>;
+				interrupts = <24 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -109,7 +109,7 @@
 			usart5: serial@fffd8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd8000 0x200>;
-				interrupts = <25>;
+				interrupts = <25 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -118,7 +118,7 @@
 			macb0: ethernet@fffc4000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffc4000 0x100>;
-				interrupts = <21>;
+				interrupts = <21 4>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index fffa005300a4..67f94d3698a2 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -46,7 +46,7 @@
 			ranges;
 
 			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
 				interrupt-parent;
@@ -56,20 +56,20 @@
 			dma: dma-controller@ffffec00 {
 				compatible = "atmel,at91sam9g45-dma";
 				reg = <0xffffec00 0x200>;
-				interrupts = <21>;
+				interrupts = <21 4>;
 			};
 
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
-				interrupts = <1>;
+				interrupts = <1 4>;
 				status = "disabled";
 			};
 
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
-				interrupts = <7>;
+				interrupts = <7 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -78,7 +78,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
-				interrupts = <8>;
+				interrupts = <8 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -87,7 +87,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
-				interrupts = <9>;
+				interrupts = <9 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -96,7 +96,7 @@
 			usart3: serial@fff98000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff98000 0x200>;
-				interrupts = <10>;
+				interrupts = <10 4>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -105,7 +105,7 @@
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;
-				interrupts = <25>;
+				interrupts = <25 4>;
 				status = "disabled";
 			};
 		};
diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c
index be6b639ecd7b..46682fafa96f 100644
--- a/arch/arm/mach-at91/irq.c
+++ b/arch/arm/mach-at91/irq.c
@@ -24,6 +24,12 @@
 #include <linux/module.h>
 #include <linux/mm.h>
 #include <linux/types.h>
+#include <linux/irq.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/err.h>
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
@@ -34,22 +40,24 @@
 #include <asm/mach/map.h>
 
 void __iomem *at91_aic_base;
+static struct irq_domain *at91_aic_domain;
+static struct device_node *at91_aic_np;
 
 static void at91_aic_mask_irq(struct irq_data *d)
 {
 	/* Disable interrupt on AIC */
-	at91_aic_write(AT91_AIC_IDCR, 1 << d->irq);
+	at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq);
 }
 
 static void at91_aic_unmask_irq(struct irq_data *d)
 {
 	/* Enable interrupt on AIC */
-	at91_aic_write(AT91_AIC_IECR, 1 << d->irq);
+	at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq);
 }
 
 unsigned int at91_extern_irq;
 
-#define is_extern_irq(irq) ((1 << (irq)) & at91_extern_irq)
+#define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq)
 
 static int at91_aic_set_type(struct irq_data *d, unsigned type)
 {
@@ -63,13 +71,13 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type)
 		srctype = AT91_AIC_SRCTYPE_RISING;
 		break;
 	case IRQ_TYPE_LEVEL_LOW:
-		if ((d->irq == AT91_ID_FIQ) || is_extern_irq(d->irq))		/* only supported on external interrupts */
+		if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_LOW;
 		else
 			return -EINVAL;
 		break;
 	case IRQ_TYPE_EDGE_FALLING:
-		if ((d->irq == AT91_ID_FIQ) || is_extern_irq(d->irq))		/* only supported on external interrupts */
+		if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq))		/* only supported on external interrupts */
 			srctype = AT91_AIC_SRCTYPE_FALLING;
 		else
 			return -EINVAL;
@@ -78,8 +86,8 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type)
 		return -EINVAL;
 	}
 
-	smr = at91_aic_read(AT91_AIC_SMR(d->irq)) & ~AT91_AIC_SRCTYPE;
-	at91_aic_write(AT91_AIC_SMR(d->irq), smr | srctype);
+	smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE;
+	at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype);
 	return 0;
 }
 
@@ -90,13 +98,13 @@ static u32 backups;
 
 static int at91_aic_set_wake(struct irq_data *d, unsigned value)
 {
-	if (unlikely(d->irq >= 32))
+	if (unlikely(d->hwirq >= NR_AIC_IRQS))
 		return -EINVAL;
 
 	if (value)
-		wakeups |= (1 << d->irq);
+		wakeups |= (1 << d->hwirq);
 	else
-		wakeups &= ~(1 << d->irq);
+		wakeups &= ~(1 << d->hwirq);
 
 	return 0;
 }
@@ -127,24 +135,64 @@ static struct irq_chip at91_aic_chip = {
 	.irq_set_wake	= at91_aic_set_wake,
 };
 
+#if defined(CONFIG_OF)
+static int __init __at91_aic_of_init(struct device_node *node,
+				     struct device_node *parent)
+{
+	at91_aic_base = of_iomap(node, 0);
+	at91_aic_np = node;
+
+	return 0;
+}
+
+static const struct of_device_id aic_ids[] __initconst = {
+	{ .compatible = "atmel,at91rm9200-aic", .data = __at91_aic_of_init },
+	{ /*sentinel*/ }
+};
+
+static void __init at91_aic_of_init(void)
+{
+	of_irq_init(aic_ids);
+}
+#else
+static void __init at91_aic_of_init(void) {}
+#endif
+
 /*
  * Initialize the AIC interrupt controller.
  */
 void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS])
 {
 	unsigned int i;
+	int irq_base;
 
-	at91_aic_base = ioremap(AT91_AIC, 512);
+	if (of_have_populated_dt())
+		at91_aic_of_init();
+	else
+		at91_aic_base = ioremap(AT91_AIC, 512);
 
 	if (!at91_aic_base)
-		panic("Impossible to ioremap AT91_AIC\n");
+		panic("Unable to ioremap AIC registers\n");
+
+	/* Add irq domain for AIC */
+	irq_base = irq_alloc_descs(-1, 0, NR_AIC_IRQS, 0);
+	if (irq_base < 0) {
+		WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n");
+		irq_base = 0;
+	}
+	at91_aic_domain = irq_domain_add_legacy(at91_aic_np, NR_AIC_IRQS,
+						irq_base, 0,
+						&irq_domain_simple_ops, NULL);
+
+	if (!at91_aic_domain)
+		panic("Unable to add AIC irq domain\n");
 
 	/*
 	 * The IVR is used by macro get_irqnr_and_base to read and verify.
 	 * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
 	 */
 	for (i = 0; i < NR_AIC_IRQS; i++) {
-		/* Put irq number in Source Vector Register: */
+		/* Put hardware irq number in Source Vector Register: */
 		at91_aic_write(AT91_AIC_SVR(i), i);
 		/* Active Low interrupt, with the specified priority */
 		at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);