diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2013-06-10 00:17:56 +0200 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2013-08-07 00:59:06 +0200 |
| commit | 66e0c12f9e17a1c97fc358f9e1f5e1dc615e279a (patch) | |
| tree | 6fdc361e76ad63073cfa63a4f2b5b0723ab771fe /arch/arm | |
| parent | Linux 3.11-rc1 (diff) | |
| download | linux-66e0c12f9e17a1c97fc358f9e1f5e1dc615e279a.tar.xz linux-66e0c12f9e17a1c97fc358f9e1f5e1dc615e279a.zip | |
ARM: nomadik: switch to use the Nomadik I2C driver
Instead of using bit-banged I2C, let's use the actual I2C
driver in the kernel. Since the I2C block may be communicating
with things like the PMIC, we need to select it from the Kconfig
just like the bit-banged adapter is selected today. The rest of
the configuration for this driver can be done from the device
tree.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 42 | ||||
| -rw-r--r-- | arch/arm/mach-nomadik/Kconfig | 1 |
2 files changed, 32 insertions, 11 deletions
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index a3acfa7b3dc9..9169d3025f39 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -140,18 +140,30 @@ }; }; i2c0 { + i2c0_default_mux: i2c0_mux { + i2c0_default_mux { + ste,function = "i2c0"; + ste,pins = "i2c0_a_1"; + }; + }; i2c0_default_mode: i2c0_default { i2c0_default_cfg { ste,pins = "GPIO62_D3", "GPIO63_D2"; - ste,input = <1>; + ste,input = <0>; }; }; }; i2c1 { + i2c1_default_mux: i2c1_mux { + i2c1_default_mux { + ste,function = "i2c1"; + ste,pins = "i2c1_a_1"; + }; + }; i2c1_default_mode: i2c1_default { i2c1_default_cfg { ste,pins = "GPIO53_L4", "GPIO54_L3"; - ste,input = <1>; + ste,input = <0>; }; }; }; @@ -159,7 +171,7 @@ i2c2_default_mode: i2c2_default { i2c2_default_cfg { ste,pins = "GPIO73_C21", "GPIO74_C20"; - ste,input = <1>; + ste,input = <0>; }; }; }; @@ -682,13 +694,17 @@ /* I2C0 connected to the STw4811 power management chip */ i2c0 { - compatible = "i2c-gpio"; - gpios = <&gpio1 31 0>, /* sda */ - <&gpio1 30 0>; /* scl */ + compatible = "st,nomadik-i2c", "arm,primecell"; + reg = <0x101f8000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <20>; + clock-frequency = <100000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&i2c0clk>, <&pclki2c0>; + clock-names = "mclk", "apb_pclk"; pinctrl-names = "default"; - pinctrl-0 = <&i2c0_default_mode>; + pinctrl-0 = <&i2c0_default_mux>, <&i2c0_default_mode>; stw4811@2d { compatible = "st,stw4811"; @@ -698,13 +714,17 @@ /* I2C1 connected to various sensors */ i2c1 { - compatible = "i2c-gpio"; - gpios = <&gpio1 22 0>, /* sda */ - <&gpio1 21 0>; /* scl */ + compatible = "st,nomadik-i2c", "arm,primecell"; + reg = <0x101f7000 0x1000>; + interrupt-parent = <&vica>; + interrupts = <21>; + clock-frequency = <100000>; #address-cells = <1>; #size-cells = <0>; + clocks = <&i2c1clk>, <&pclki2c1>; + clock-names = "mclk", "apb_pclk"; pinctrl-names = "default"; - pinctrl-0 = <&i2c1_default_mode>; + pinctrl-0 = <&i2c1_default_mux>, <&i2c1_default_mode>; camera@2d { compatible = "st,camera"; diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig index 5981c3db9b41..4d42da49753c 100644 --- a/arch/arm/mach-nomadik/Kconfig +++ b/arch/arm/mach-nomadik/Kconfig @@ -27,6 +27,7 @@ config MACH_NOMADIK_8815NHK select NOMADIK_8815 select I2C select I2C_ALGOBIT + select I2C_NOMADIK endmenu endif |