ARM: pxa: remove raumfeld board files and defconfig

These boards are now fully ported to device-tree, so the old implementation
can go away.

The defconfig needs downstream quirks anyway, so we can just remove it from
mainline.

Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

5 files changed, 0 insertions, 1409 deletions

diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 6bb506edb1f5..e96a9743b220 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -66,9 +66,6 @@ CONFIG_MACH_MIOA701=y
 CONFIG_PXA_EZX=y
 CONFIG_MACH_MP900C=y
 CONFIG_ARCH_PXA_PALM=y
-CONFIG_MACH_RAUMFELD_RC=y
-CONFIG_MACH_RAUMFELD_CONNECTOR=y
-CONFIG_MACH_RAUMFELD_SPEAKER=y
 CONFIG_PXA_SHARPSL=y
 CONFIG_MACH_POODLE=y
 CONFIG_MACH_CORGI=y
@@ -498,7 +495,6 @@ CONFIG_SND_PXA2XX_SOC_E800=m
 CONFIG_SND_PXA2XX_SOC_EM_X270=m
 CONFIG_SND_PXA2XX_SOC_PALM27X=y
 CONFIG_SND_SOC_ZYLONITE=m
-CONFIG_SND_SOC_RAUMFELD=m
 CONFIG_SND_PXA2XX_SOC_HX4700=m
 CONFIG_SND_PXA2XX_SOC_MAGICIAN=m
 CONFIG_SND_PXA2XX_SOC_MIOA701=m
diff --git a/arch/arm/configs/raumfeld_defconfig b/arch/arm/configs/raumfeld_defconfig
deleted file mode 100644
index 2dd56e9a484e..000000000000
--- a/arch/arm/configs/raumfeld_defconfig
+++ /dev/null
@@ -1,197 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_PXA=y
-CONFIG_MACH_RAUMFELD_RC=y
-CONFIG_MACH_RAUMFELD_CONNECTOR=y
-CONFIG_MACH_RAUMFELD_SPEAKER=y
-CONFIG_NO_HZ=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_CMDLINE="console=ttyS0,115200 rw"
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_IDLE=y
-CONFIG_PM=y
-CONFIG_APM_EMULATION=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_SYN_COOKIES=y
-CONFIG_IPV6=y
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MARVELL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_ISL29003=y
-CONFIG_IIO=y
-CONFIG_AD5446=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_USB_USBNET=y
-# CONFIG_USB_NET_AX8817X is not set
-# CONFIG_USB_NET_NET1080 is not set
-CONFIG_USB_NET_MCS7830=y
-# CONFIG_USB_NET_CDC_SUBSET is not set
-# CONFIG_USB_NET_ZAURUS is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_EETI=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_GPIO_ROTARY_ENCODER=y
-CONFIG_SERIAL_PXA=y
-CONFIG_SERIAL_PXA_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_PXA=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_DEBUG_GPIO=y
-CONFIG_W1_MASTER_GPIO=m
-CONFIG_POWER_SUPPLY=y
-CONFIG_PDA_POWER=y
-CONFIG_BATTERY_DS2760=m
-CONFIG_SENSORS_LIS3_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_DEBUG=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_MAX8660=y
-CONFIG_FB=y
-CONFIG_FB_PXA=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_PXA2XX_SOC=y
-CONFIG_SND_SOC_RAUMFELD=y
-CONFIG_HID_DRAGONRISE=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_TWINHAN=y
-CONFIG_HID_NTRIG=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-CONFIG_HID_GREENASIA=y
-CONFIG_HID_SMARTJOYPLUS=y
-CONFIG_HID_TOPSEED=y
-CONFIG_HID_THRUSTMASTER=y
-CONFIG_HID_ZEROPLUS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
-CONFIG_USB_STORAGE_USBAT=y
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_MMC=y
-CONFIG_MMC_PXA=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_LT3593=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_PXA=y
-CONFIG_DMADEVICES=y
-CONFIG_UIO=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_FSCACHE=y
-CONFIG_FSCACHE_STATS=y
-CONFIG_CACHEFILES=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFS_FSCACHE=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_737=y
-CONFIG_NLS_CODEPAGE_775=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_CODEPAGE_852=y
-CONFIG_NLS_CODEPAGE_855=y
-CONFIG_NLS_CODEPAGE_857=y
-CONFIG_NLS_CODEPAGE_860=y
-CONFIG_NLS_CODEPAGE_861=y
-CONFIG_NLS_CODEPAGE_862=y
-CONFIG_NLS_CODEPAGE_863=y
-CONFIG_NLS_CODEPAGE_864=y
-CONFIG_NLS_CODEPAGE_865=y
-CONFIG_NLS_CODEPAGE_866=y
-CONFIG_NLS_CODEPAGE_869=y
-CONFIG_NLS_CODEPAGE_936=y
-CONFIG_NLS_CODEPAGE_950=y
-CONFIG_NLS_CODEPAGE_932=y
-CONFIG_NLS_CODEPAGE_949=y
-CONFIG_NLS_CODEPAGE_874=y
-CONFIG_NLS_ISO8859_8=y
-CONFIG_NLS_CODEPAGE_1250=y
-CONFIG_NLS_CODEPAGE_1251=y
-CONFIG_NLS_ASCII=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_2=y
-CONFIG_NLS_ISO8859_3=y
-CONFIG_NLS_ISO8859_4=y
-CONFIG_NLS_ISO8859_5=y
-CONFIG_NLS_ISO8859_6=y
-CONFIG_NLS_ISO8859_7=y
-CONFIG_NLS_ISO8859_9=y
-CONFIG_NLS_ISO8859_13=y
-CONFIG_NLS_ISO8859_14=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_KOI8_R=y
-CONFIG_NLS_KOI8_U=y
-CONFIG_NLS_UTF8=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index dc8e4f4b7ade..8839c72fdee3 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -454,24 +454,6 @@ config MACH_TREO680
 	  Say Y here if you intend to run this kernel on Palm Treo 680
 	  smartphone.
 
-config MACH_RAUMFELD_RC
-	bool "Raumfeld Controller"
-	select CPU_PXA300
-	select POWER_SUPPLY
-	select PXA3xx
-
-config MACH_RAUMFELD_CONNECTOR
-	bool "Raumfeld Connector"
-	select CPU_PXA300
-	select POWER_SUPPLY
-	select PXA3xx
-
-config MACH_RAUMFELD_SPEAKER
-	bool "Raumfeld Speaker"
-	select CPU_PXA300
-	select POWER_SUPPLY
-	select PXA3xx
-
 config PXA_SHARPSL
 	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
 	select SHARP_PARAM
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0a8e9611052f..f70728930c4f 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -86,9 +86,6 @@ obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_ICONTROL)     += icontrol.o mxm8x10.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
-obj-$(CONFIG_MACH_RAUMFELD_RC)		+= raumfeld.o
-obj-$(CONFIG_MACH_RAUMFELD_CONNECTOR)	+= raumfeld.o
-obj-$(CONFIG_MACH_RAUMFELD_SPEAKER)	+= raumfeld.o
 obj-$(CONFIG_MACH_ZIPIT2)	+= z2.o
 
 obj-$(CONFIG_PXA_SYSTEMS_CPLDS)	+= pxa_cplds_irqs.o
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
deleted file mode 100644
index e1db072756f2..000000000000
--- a/arch/arm/mach-pxa/raumfeld.c
+++ /dev/null
@@ -1,1187 +0,0 @@
-/*
- * arch/arm/mach-pxa/raumfeld.c
- *
- * Support for the following Raumfeld devices:
- *
- * 	* Controller
- *  	* Connector
- *  	* Speaker S/M
- *
- * See http://www.raumfeld.com for details.
- *
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/property.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/smsc911x.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/leds.h>
-#include <linux/w1-gpio.h>
-#include <linux/sched.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/i2c.h>
-#include <linux/platform_data/i2c-pxa.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/lis3lv02d.h>
-#include <linux/pda_power.h>
-#include <linux/power_supply.h>
-#include <linux/regulator/max8660.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/consumer.h>
-#include <linux/delay.h>
-
-#include <asm/system_info.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "pxa300.h"
-#include <linux/platform_data/usb-ohci-pxa27x.h>
-#include <linux/platform_data/video-pxafb.h>
-#include <linux/platform_data/mmc-pxamci.h>
-#include <linux/platform_data/mtd-nand-pxa3xx.h>
-
-#include "generic.h"
-#include "devices.h"
-
-/* common GPIO	definitions */
-
-/* inputs */
-#define GPIO_ON_OFF		(14)
-#define GPIO_VOLENC_A		(19)
-#define GPIO_VOLENC_B		(20)
-#define GPIO_CHARGE_DONE	(23)
-#define GPIO_CHARGE_IND		(27)
-#define GPIO_TOUCH_IRQ		(32)
-#define GPIO_ETH_IRQ		(40)
-#define GPIO_SPI_MISO		(98)
-#define GPIO_ACCEL_IRQ		(104)
-#define GPIO_RESCUE_BOOT	(115)
-#define GPIO_DOCK_DETECT	(116)
-#define GPIO_KEY1		(117)
-#define GPIO_KEY2		(118)
-#define GPIO_KEY3		(119)
-#define GPIO_CHARGE_USB_OK	(112)
-#define GPIO_CHARGE_DC_OK	(101)
-#define GPIO_CHARGE_USB_SUSP	(102)
-
-/* outputs */
-#define GPIO_SHUTDOWN_SUPPLY	(16)
-#define GPIO_SHUTDOWN_BATT	(18)
-#define GPIO_CHRG_PEN2		(31)
-#define GPIO_TFT_VA_EN		(33)
-#define GPIO_SPDIF_CS		(34)
-#define GPIO_LED2		(35)
-#define GPIO_LED1		(36)
-#define GPIO_SPDIF_RESET	(38)
-#define GPIO_SPI_CLK		(95)
-#define GPIO_MCLK_DAC_CS	(96)
-#define GPIO_SPI_MOSI		(97)
-#define GPIO_W1_PULLUP_ENABLE	(105)
-#define GPIO_DISPLAY_ENABLE	(106)
-#define GPIO_MCLK_RESET		(111)
-#define GPIO_W2W_RESET		(113)
-#define GPIO_W2W_PDN		(114)
-#define GPIO_CODEC_RESET	(120)
-#define GPIO_AUDIO_VA_ENABLE	(124)
-#define GPIO_ACCEL_CS		(125)
-#define GPIO_ONE_WIRE		(126)
-
-/*
- * GPIO configurations
- */
-static mfp_cfg_t raumfeld_controller_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO77_UART1_RXD,
-	GPIO78_UART1_TXD,
-	GPIO79_UART1_CTS,
-	GPIO81_UART1_DSR,
-	GPIO83_UART1_DTR,
-	GPIO84_UART1_RTS,
-
-	/* UART3 */
-	GPIO110_UART3_RXD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* I2C */
-	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* SPI */
-	GPIO34_GPIO,	/* SPDIF_CS */
-	GPIO96_GPIO,	/* MCLK_CS */
-	GPIO125_GPIO,	/* ACCEL_CS */
-
-	/* MMC */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-
-	/* One-wire */
-	GPIO126_GPIO | MFP_LPM_FLOAT,
-	GPIO105_GPIO | MFP_PULL_LOW | MFP_LPM_PULL_LOW,
-
-	/* CHRG_USB_OK */
-	GPIO101_GPIO | MFP_PULL_HIGH,
-	/* CHRG_USB_OK */
-	GPIO112_GPIO | MFP_PULL_HIGH,
-	/* CHRG_USB_SUSP */
-	GPIO102_GPIO,
-	/* DISPLAY_ENABLE */
-	GPIO106_GPIO,
-	/* DOCK_DETECT */
-	GPIO116_GPIO | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* LCD */
-	GPIO54_LCD_LDD_0,
-	GPIO55_LCD_LDD_1,
-	GPIO56_LCD_LDD_2,
-	GPIO57_LCD_LDD_3,
-	GPIO58_LCD_LDD_4,
-	GPIO59_LCD_LDD_5,
-	GPIO60_LCD_LDD_6,
-	GPIO61_LCD_LDD_7,
-	GPIO62_LCD_LDD_8,
-	GPIO63_LCD_LDD_9,
-	GPIO64_LCD_LDD_10,
-	GPIO65_LCD_LDD_11,
-	GPIO66_LCD_LDD_12,
-	GPIO67_LCD_LDD_13,
-	GPIO68_LCD_LDD_14,
-	GPIO69_LCD_LDD_15,
-	GPIO70_LCD_LDD_16,
-	GPIO71_LCD_LDD_17,
-	GPIO72_LCD_FCLK,
-	GPIO73_LCD_LCLK,
-	GPIO74_LCD_PCLK,
-	GPIO75_LCD_BIAS,
-};
-
-static mfp_cfg_t raumfeld_connector_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO77_UART1_RXD,
-	GPIO78_UART1_TXD,
-	GPIO79_UART1_CTS,
-	GPIO81_UART1_DSR,
-	GPIO83_UART1_DTR,
-	GPIO84_UART1_RTS,
-
-	/* UART3 */
-	GPIO110_UART3_RXD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* I2C */
-	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* SPI */
-	GPIO34_GPIO,	/* SPDIF_CS */
-	GPIO96_GPIO,	/* MCLK_CS */
-	GPIO125_GPIO,	/* ACCEL_CS */
-
-	/* MMC */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-
-	/* Ethernet */
-	GPIO1_nCS2,			/* CS */
-	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
-
-	/* SSP for I2S */
-	GPIO85_SSP1_SCLK,
-	GPIO89_SSP1_EXTCLK,
-	GPIO86_SSP1_FRM,
-	GPIO87_SSP1_TXD,
-	GPIO88_SSP1_RXD,
-	GPIO90_SSP1_SYSCLK,
-
-	/* SSP2 for S/PDIF */
-	GPIO25_SSP2_SCLK,
-	GPIO26_SSP2_FRM,
-	GPIO27_SSP2_TXD,
-	GPIO29_SSP2_EXTCLK,
-
-	/* LEDs */
-	GPIO35_GPIO | MFP_LPM_PULL_LOW,
-	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-static mfp_cfg_t raumfeld_speaker_pin_config[] __initdata = {
-	/* UART1 */
-	GPIO77_UART1_RXD,
-	GPIO78_UART1_TXD,
-	GPIO79_UART1_CTS,
-	GPIO81_UART1_DSR,
-	GPIO83_UART1_DTR,
-	GPIO84_UART1_RTS,
-
-	/* UART3 */
-	GPIO110_UART3_RXD,
-
-	/* USB Host */
-	GPIO0_2_USBH_PEN,
-	GPIO1_2_USBH_PWR,
-
-	/* I2C */
-	GPIO21_I2C_SCL | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-	GPIO22_I2C_SDA | MFP_LPM_FLOAT | MFP_PULL_FLOAT,
-
-	/* SPI */
-	GPIO34_GPIO,	/* SPDIF_CS */
-	GPIO96_GPIO,	/* MCLK_CS */
-	GPIO125_GPIO,	/* ACCEL_CS */
-
-	/* MMC */
-	GPIO3_MMC1_DAT0,
-	GPIO4_MMC1_DAT1,
-	GPIO5_MMC1_DAT2,
-	GPIO6_MMC1_DAT3,
-	GPIO7_MMC1_CLK,
-	GPIO8_MMC1_CMD,
-
-	/* Ethernet */
-	GPIO1_nCS2,			/* CS */
-	GPIO40_GPIO | MFP_PULL_HIGH,	/* IRQ */
-
-	/* SSP for I2S */
-	GPIO85_SSP1_SCLK,
-	GPIO89_SSP1_EXTCLK,
-	GPIO86_SSP1_FRM,
-	GPIO87_SSP1_TXD,
-	GPIO88_SSP1_RXD,
-	GPIO90_SSP1_SYSCLK,
-
-	/* LEDs */
-	GPIO35_GPIO | MFP_LPM_PULL_LOW,
-	GPIO36_GPIO | MFP_LPM_DRIVE_HIGH,
-};
-
-/*
- * SMSC LAN9220 Ethernet
- */
-
-static struct resource smc91x_resources[] = {
-	{
-		.start	= PXA3xx_CS2_PHYS,
-		.end	= PXA3xx_CS2_PHYS + 0xfffff,
-		.flags	= IORESOURCE_MEM,
-	},
-	{
-		.start	= PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO_ETH_IRQ),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
-	}
-};
-
-static struct smsc911x_platform_config raumfeld_smsc911x_config = {
-	.phy_interface	= PHY_INTERFACE_MODE_MII,
-	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
-	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
-	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smsc911x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(smc91x_resources),
-	.resource	= smc91x_resources,
-	.dev		= {
-		.platform_data = &raumfeld_smsc911x_config,
-	}
-};
-
-/**
- * NAND
- */
-
-static struct mtd_partition raumfeld_nand_partitions[] = {
-	{
-		.name		= "Bootloader",
-		.offset		= 0,
-		.size		= 0xa0000,
-		.mask_flags	= MTD_WRITEABLE, /* force read-only */
-	},
-	{
-		.name		= "BootloaderEnvironment",
-		.offset		= 0xa0000,
-		.size		= 0x20000,
-	},
-	{
-		.name		= "BootloaderSplashScreen",
-		.offset		= 0xc0000,
-		.size		= 0x60000,
-	},
-	{
-		.name		= "UBI",
-		.offset		= 0x120000,
-		.size		= MTDPART_SIZ_FULL,
-	},
-};
-
-static struct pxa3xx_nand_platform_data raumfeld_nand_info = {
-	.keep_config	= 1,
-	.parts		= raumfeld_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(raumfeld_nand_partitions),
-};
-
-/**
- * USB (OHCI) support
- */
-
-static struct pxaohci_platform_data raumfeld_ohci_info = {
-	.port_mode      = PMM_GLOBAL_MODE,
-	.flags		= ENABLE_PORT1,
-};
-
-/**
- * Rotary encoder input device
- */
-
-static struct gpiod_lookup_table raumfeld_rotary_gpios_table = {
-	.dev_id = "rotary-encoder.0",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-0",
-				GPIO_VOLENC_A, NULL, 0, GPIO_ACTIVE_LOW),
-		GPIO_LOOKUP_IDX("gpio-0",
-				GPIO_VOLENC_B, NULL, 1, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static const struct property_entry raumfeld_rotary_properties[] __initconst = {
-	PROPERTY_ENTRY_U32("rotary-encoder,steps-per-period", 24),
-	PROPERTY_ENTRY_U32("linux,axis",		      REL_X),
-	PROPERTY_ENTRY_U32("rotary-encoder,relative_axis",    1),
-	{ },
-};
-
-static struct platform_device rotary_encoder_device = {
-	.name		= "rotary-encoder",
-	.id		= 0,
-};
-
-/**
- * GPIO buttons
- */
-
-static struct gpio_keys_button gpio_keys_button[] = {
-	{
-		.code			= KEY_F1,
-		.type			= EV_KEY,
-		.gpio			= GPIO_KEY1,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "Button 1",
-	},
-	{
-		.code			= KEY_F2,
-		.type			= EV_KEY,
-		.gpio			= GPIO_KEY2,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "Button 2",
-	},
-	{
-		.code			= KEY_F3,
-		.type			= EV_KEY,
-		.gpio			= GPIO_KEY3,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "Button 3",
-	},
-	{
-		.code			= KEY_F4,
-		.type			= EV_KEY,
-		.gpio			= GPIO_RESCUE_BOOT,
-		.active_low		= 0,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "rescue boot button",
-	},
-	{
-		.code			= KEY_F5,
-		.type			= EV_KEY,
-		.gpio			= GPIO_DOCK_DETECT,
-		.active_low		= 1,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "dock detect",
-	},
-	{
-		.code			= KEY_F6,
-		.type			= EV_KEY,
-		.gpio			= GPIO_ON_OFF,
-		.active_low		= 0,
-		.wakeup			= 0,
-		.debounce_interval	= 5, /* ms */
-		.desc			= "on_off button",
-	},
-};
-
-static struct gpio_keys_platform_data gpio_keys_platform_data = {
-	.buttons	= gpio_keys_button,
-	.nbuttons	= ARRAY_SIZE(gpio_keys_button),
-	.rep		= 0,
-};
-
-static struct platform_device raumfeld_gpio_keys_device = {
-	.name	= "gpio-keys",
-	.id	= -1,
-	.dev 	= {
-		.platform_data	= &gpio_keys_platform_data,
-	}
-};
-
-/**
- * GPIO LEDs
- */
-
-static struct gpio_led raumfeld_leds[] = {
-	{
-		.name		= "raumfeld:1",
-		.gpio		= GPIO_LED1,
-		.active_low	= 1,
-		.default_state	= LEDS_GPIO_DEFSTATE_ON,
-	},
-	{
-		.name		= "raumfeld:2",
-		.gpio		= GPIO_LED2,
-		.active_low	= 0,
-		.default_state	= LEDS_GPIO_DEFSTATE_OFF,
-	}
-};
-
-static struct gpio_led_platform_data raumfeld_led_platform_data = {
-	.leds		= raumfeld_leds,
-	.num_leds	= ARRAY_SIZE(raumfeld_leds),
-};
-
-static struct platform_device raumfeld_led_device = {
-	.name	= "leds-gpio",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &raumfeld_led_platform_data,
-	},
-};
-
-/**
- * One-wire (W1 bus) support
- */
-
-static void w1_enable_external_pullup(int enable)
-{
-	gpio_set_value(GPIO_W1_PULLUP_ENABLE, enable);
-	msleep(100);
-}
-
-static struct gpiod_lookup_table raumfeld_w1_gpiod_table = {
-	.dev_id = "w1-gpio",
-	.table = {
-		GPIO_LOOKUP_IDX("gpio-pxa", GPIO_ONE_WIRE, NULL, 0,
-				GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN),
-	},
-};
-
-static struct w1_gpio_platform_data w1_gpio_platform_data = {
-	.enable_external_pullup = w1_enable_external_pullup,
-};
-
-static struct platform_device raumfeld_w1_gpio_device = {
-	.name	= "w1-gpio",
-	.dev	= {
-		.platform_data = &w1_gpio_platform_data
-	}
-};
-
-static void __init raumfeld_w1_init(void)
-{
-	int ret = gpio_request(GPIO_W1_PULLUP_ENABLE,
-			        "W1 external pullup enable");
-
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n");
-	else
-		gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
-
-	gpiod_add_lookup_table(&raumfeld_w1_gpiod_table);
-	platform_device_register(&raumfeld_w1_gpio_device);
-}
-
-/**
- * Framebuffer device
- */
-
-static struct pwm_lookup raumfeld_pwm_lookup[] = {
-	PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight", NULL, 10000,
-		   PWM_POLARITY_NORMAL),
-};
-
-/* PWM controlled backlight */
-static struct platform_pwm_backlight_data raumfeld_pwm_backlight_data = {
-	.max_brightness	= 100,
-	.dft_brightness	= 100,
-	.enable_gpio	= -1,
-};
-
-static struct platform_device raumfeld_pwm_backlight_device = {
-	.name	= "pwm-backlight",
-	.dev	= {
-		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &raumfeld_pwm_backlight_data,
-	}
-};
-
-/* LT3593 controlled backlight */
-static struct gpio_led raumfeld_lt3593_led = {
-	.name		= "backlight",
-	.gpio		= mfp_to_gpio(MFP_PIN_GPIO17),
-	.default_state	= LEDS_GPIO_DEFSTATE_ON,
-};
-
-static struct gpio_led_platform_data raumfeld_lt3593_platform_data = {
-	.leds		= &raumfeld_lt3593_led,
-	.num_leds	= 1,
-};
-
-static struct platform_device raumfeld_lt3593_device = {
-	.name	= "leds-lt3593",
-	.id	= -1,
-	.dev	= {
-		.platform_data = &raumfeld_lt3593_platform_data,
-	},
-};
-
-static struct pxafb_mode_info sharp_lq043t3dx02_mode = {
-	.pixclock	= 111000,
-	.xres		= 480,
-	.yres		= 272,
-	.bpp		= 16,
-	.hsync_len	= 41,
-	.left_margin	= 2,
-	.right_margin	= 1,
-	.vsync_len	= 10,
-	.upper_margin	= 3,
-	.lower_margin	= 1,
-	.sync		= 0,
-};
-
-static struct pxafb_mach_info raumfeld_sharp_lcd_info = {
-	.modes		= &sharp_lq043t3dx02_mode,
-	.num_modes	= 1,
-	.video_mem_size = 0x400000,
-	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-#ifdef CONFIG_PXA3XX_GCU
-	.acceleration_enabled = 1,
-#endif
-};
-
-static void __init raumfeld_lcd_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_TFT_VA_EN\n");
-	else
-		gpio_direction_output(GPIO_TFT_VA_EN, 1);
-
-	msleep(100);
-
-	ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n");
-	else
-		gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
-
-	/* Hardware revision 2 has the backlight regulator controlled
-	 * by an LT3593, earlier and later devices use PWM for that. */
-	if ((system_rev & 0xff) == 2) {
-		platform_device_register(&raumfeld_lt3593_device);
-	} else {
-		mfp_cfg_t raumfeld_pwm_pin_config = GPIO17_PWM0_OUT;
-		pxa3xx_mfp_config(&raumfeld_pwm_pin_config, 1);
-		pwm_add_table(raumfeld_pwm_lookup,
-			      ARRAY_SIZE(raumfeld_pwm_lookup));
-		platform_device_register(&raumfeld_pwm_backlight_device);
-	}
-
-	pxa_set_fb_info(NULL, &raumfeld_sharp_lcd_info);
-	platform_device_register(&pxa3xx_device_gcu);
-}
-
-/**
- * SPI devices
- */
-
-static struct spi_gpio_platform_data raumfeld_spi_platform_data = {
-	.num_chipselect	= 3,
-};
-
-static struct platform_device raumfeld_spi_device = {
-	.name	= "spi_gpio",
-	.id	= 0,
-	.dev 	= {
-		.platform_data	= &raumfeld_spi_platform_data,
-	}
-};
-
-static struct gpiod_lookup_table raumfeld_spi_gpiod_table = {
-	.dev_id         = "spi_gpio",
-	.table          = {
-		GPIO_LOOKUP("gpio-0", GPIO_SPI_CLK,
-			    "sck", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-0", GPIO_SPI_MOSI,
-			    "mosi", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP("gpio-0", GPIO_SPI_MISO,
-			    "miso", GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("gpio-0", GPIO_SPDIF_CS,
-				"cs", 0, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("gpio-0", GPIO_ACCEL_CS,
-				"cs", 1, GPIO_ACTIVE_HIGH),
-		GPIO_LOOKUP_IDX("gpio-0", GPIO_MCLK_DAC_CS,
-				"cs", 2, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static struct lis3lv02d_platform_data lis3_pdata = {
-	.click_flags 	= LIS3_CLICK_SINGLE_X |
-			  LIS3_CLICK_SINGLE_Y |
-			  LIS3_CLICK_SINGLE_Z,
-	.irq_cfg	= LIS3_IRQ1_CLICK | LIS3_IRQ2_CLICK,
-	.wakeup_flags	= LIS3_WAKEUP_X_LO | LIS3_WAKEUP_X_HI |
-			  LIS3_WAKEUP_Y_LO | LIS3_WAKEUP_Y_HI |
-			  LIS3_WAKEUP_Z_LO | LIS3_WAKEUP_Z_HI,
-	.wakeup_thresh	= 10,
-	.click_thresh_x = 10,
-	.click_thresh_y = 10,
-	.click_thresh_z = 10,
-};
-
-#define SPI_AK4104	\
-{			\
-	.modalias	= "ak4104-codec",	\
-	.max_speed_hz	= 10000,		\
-	.bus_num	= 0,			\
-	.chip_select	= 0,			\
-}
-
-#define SPI_LIS3	\
-{			\
-	.modalias	= "lis3lv02d_spi",	\
-	.max_speed_hz	= 1000000,		\
-	.bus_num	= 0,			\
-	.chip_select	= 1,			\
-	.platform_data	= &lis3_pdata,		\
-	.irq		= PXA_GPIO_TO_IRQ(GPIO_ACCEL_IRQ),	\
-}
-
-#define SPI_DAC7512	\
-{	\
-	.modalias	= "dac7512",		\
-	.max_speed_hz	= 1000000,		\
-	.bus_num	= 0,			\
-	.chip_select	= 2,			\
-}
-
-static struct spi_board_info connector_spi_devices[] __initdata = {
-	SPI_AK4104,
-	SPI_DAC7512,
-};
-
-static struct spi_board_info speaker_spi_devices[] __initdata = {
-	SPI_DAC7512,
-};
-
-static struct spi_board_info controller_spi_devices[] __initdata = {
-	SPI_LIS3,
-};
-
-/**
- * MMC for Marvell Libertas 8688 via SDIO
- */
-
-static int raumfeld_mci_init(struct device *dev, irq_handler_t isr, void *data)
-{
-	gpio_set_value(GPIO_W2W_RESET, 1);
-	gpio_set_value(GPIO_W2W_PDN, 1);
-
-	return 0;
-}
-
-static void raumfeld_mci_exit(struct device *dev, void *data)
-{
-	gpio_set_value(GPIO_W2W_RESET, 0);
-	gpio_set_value(GPIO_W2W_PDN, 0);
-}
-
-static struct pxamci_platform_data raumfeld_mci_platform_data = {
-	.init			= raumfeld_mci_init,
-	.exit			= raumfeld_mci_exit,
-	.detect_delay_ms	= 200,
-};
-
-/*
- * External power / charge logic
- */
-
-static int power_supply_init(struct device *dev)
-{
-	return 0;
-}
-
-static void power_supply_exit(struct device *dev)
-{
-}
-
-static int raumfeld_is_ac_online(void)
-{
-	return !gpio_get_value(GPIO_CHARGE_DC_OK);
-}
-
-static int raumfeld_is_usb_online(void)
-{
-	return 0;
-}
-
-static char *raumfeld_power_supplicants[] = { "ds2760-battery.0" };
-
-static void raumfeld_power_signal_charged(void)
-{
-	struct power_supply *psy =
-		power_supply_get_by_name(raumfeld_power_supplicants[0]);
-
-	if (psy) {
-		power_supply_set_battery_charged(psy);
-		power_supply_put(psy);
-	}
-}
-
-static int raumfeld_power_resume(void)
-{
-	/* check if GPIO_CHARGE_DONE went low while we were sleeping */
-	if (!gpio_get_value(GPIO_CHARGE_DONE))
-		raumfeld_power_signal_charged();
-
-	return 0;
-}
-
-static struct pda_power_pdata power_supply_info = {
-	.init			= power_supply_init,
-	.is_ac_online		= raumfeld_is_ac_online,
-	.is_usb_online		= raumfeld_is_usb_online,
-	.exit			= power_supply_exit,
-	.supplied_to		= raumfeld_power_supplicants,
-	.num_supplicants	= ARRAY_SIZE(raumfeld_power_supplicants),
-	.resume			= raumfeld_power_resume,
-};
-
-static struct resource power_supply_resources[] = {
-	{
-		.name  = "ac",
-		.flags = IORESOURCE_IRQ |
-			 IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE,
-		.start = GPIO_CHARGE_DC_OK,
-		.end   = GPIO_CHARGE_DC_OK,
-	},
-};
-
-static irqreturn_t charge_done_irq(int irq, void *dev_id)
-{
-	raumfeld_power_signal_charged();
-	return IRQ_HANDLED;
-}
-
-static struct platform_device raumfeld_power_supply = {
-	.name = "pda-power",
-	.id   = -1,
-	.dev  = {
-		.platform_data = &power_supply_info,
-	},
-	.resource      = power_supply_resources,
-	.num_resources = ARRAY_SIZE(power_supply_resources),
-};
-
-static void __init raumfeld_power_init(void)
-{
-	int ret;
-
-	/* Set PEN2 high to enable maximum charge current */
-	ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_CHRG_PEN2\n");
-	else
-		gpio_direction_output(GPIO_CHRG_PEN2, 1);
-
-	ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_CHARGE_DC_OK\n");
-
-	ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n");
-	else
-		gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
-
-	power_supply_resources[0].start = gpio_to_irq(GPIO_CHARGE_DC_OK);
-	power_supply_resources[0].end = gpio_to_irq(GPIO_CHARGE_DC_OK);
-
-	ret = request_irq(gpio_to_irq(GPIO_CHARGE_DONE),
-			&charge_done_irq, IORESOURCE_IRQ_LOWEDGE,
-			"charge_done", NULL);
-
-	if (ret < 0)
-		printk(KERN_ERR "%s: unable to register irq %d\n", __func__,
-			GPIO_CHARGE_DONE);
-	else
-		platform_device_register(&raumfeld_power_supply);
-}
-
-/* Fixed regulator for AUDIO_VA, 0-0048 maps to the cs4270 codec device */
-
-static struct regulator_consumer_supply audio_va_consumer_supply =
-	REGULATOR_SUPPLY("va", "0-0048");
-
-static struct regulator_init_data audio_va_initdata = {
-	.consumer_supplies = &audio_va_consumer_supply,
-	.num_consumer_supplies = 1,
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config audio_va_config = {
-	.supply_name		= "audio_va",
-	.microvolts		= 5000000,
-	.enable_high		= 1,
-	.enabled_at_boot	= 0,
-	.init_data		= &audio_va_initdata,
-};
-
-static struct platform_device audio_va_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 0,
-	.dev	= {
-		.platform_data = &audio_va_config,
-	},
-};
-
-static struct gpiod_lookup_table audio_va_gpiod_table = {
-	.dev_id = "reg-fixed-voltage.0",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa", GPIO_AUDIO_VA_ENABLE,
-			    NULL, GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-/* Dummy supplies for Codec's VD/VLC */
-
-static struct regulator_consumer_supply audio_dummy_supplies[] = {
-	REGULATOR_SUPPLY("vd", "0-0048"),
-	REGULATOR_SUPPLY("vlc", "0-0048"),
-};
-
-static struct regulator_init_data audio_dummy_initdata = {
-	.consumer_supplies = audio_dummy_supplies,
-	.num_consumer_supplies = ARRAY_SIZE(audio_dummy_supplies),
-	.constraints = {
-		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-	},
-};
-
-static struct fixed_voltage_config audio_dummy_config = {
-	.supply_name		= "audio_vd",
-	.microvolts		= 3300000,
-	.init_data		= &audio_dummy_initdata,
-};
-
-static struct platform_device audio_supply_dummy_device = {
-	.name	= "reg-fixed-voltage",
-	.id	= 1,
-	.dev	= {
-		.platform_data = &audio_dummy_config,
-	},
-};
-
-static struct platform_device *audio_regulator_devices[] = {
-	&audio_va_device,
-	&audio_supply_dummy_device,
-};
-
-/**
- * Regulator support via MAX8660
- */
-
-static struct regulator_consumer_supply vcc_mmc_supply =
-	REGULATOR_SUPPLY("vmmc", "pxa2xx-mci.0");
-
-static struct regulator_init_data vcc_mmc_init_data = {
-	.constraints = {
-		.min_uV			= 3300000,
-		.max_uV			= 3300000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL,
-		.valid_ops_mask		= REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_MODE,
-	},
-	.consumer_supplies = &vcc_mmc_supply,
-	.num_consumer_supplies = 1,
-};
-
-static struct max8660_subdev_data max8660_v6_subdev_data = {
-	.id		= MAX8660_V6,
-	.name		= "vmmc",
-	.platform_data	= &vcc_mmc_init_data,
-};
-
-static struct max8660_platform_data max8660_pdata = {
-	.subdevs = &max8660_v6_subdev_data,
-	.num_subdevs = 1,
-};
-
-/**
- * I2C devices
- */
-
-static struct i2c_board_info raumfeld_pwri2c_board_info = {
-	.type		= "max8660",
-	.addr		= 0x34,
-	.platform_data	= &max8660_pdata,
-};
-
-static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
-	.type	= "cs4270",
-	.addr	= 0x48,
-};
-
-static struct gpiod_lookup_table raumfeld_controller_gpios_table = {
-	.dev_id = "0-000a",
-	.table = {
-		GPIO_LOOKUP("gpio-pxa",
-			    GPIO_TOUCH_IRQ, "attn", GPIO_ACTIVE_HIGH),
-		{ },
-	},
-};
-
-static const struct resource raumfeld_controller_resources[] __initconst = {
-	{
-		.start	= PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
-		.end	= PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
-	},
-};
-
-static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
-	.type	= "eeti_ts",
-	.addr	= 0x0a,
-	.resources = raumfeld_controller_resources,
-	.num_resources = ARRAY_SIZE(raumfeld_controller_resources),
-};
-
-static struct platform_device *raumfeld_common_devices[] = {
-	&raumfeld_gpio_keys_device,
-	&raumfeld_led_device,
-	&raumfeld_spi_device,
-};
-
-static void __init raumfeld_audio_init(void)
-{
-	int ret;
-
-	ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
-	if (ret < 0)
-		pr_warn("unable to request GPIO_CODEC_RESET\n");
-	else
-		gpio_direction_output(GPIO_CODEC_RESET, 1);
-
-	ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
-	if (ret < 0)
-		pr_warn("unable to request GPIO_SPDIF_RESET\n");
-	else
-		gpio_direction_output(GPIO_SPDIF_RESET, 1);
-
-	ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
-	if (ret < 0)
-		pr_warn("unable to request GPIO_MCLK_RESET\n");
-	else
-		gpio_direction_output(GPIO_MCLK_RESET, 1);
-
-	gpiod_add_lookup_table(&audio_va_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(audio_regulator_devices));
-}
-
-static void __init raumfeld_common_init(void)
-{
-	int ret;
-
-	/* The on/off button polarity has changed after revision 1 */
-	if ((system_rev & 0xff) > 1) {
-		int i;
-
-		for (i = 0; i < ARRAY_SIZE(gpio_keys_button); i++)
-			if (!strcmp(gpio_keys_button[i].desc, "on_off button"))
-				gpio_keys_button[i].active_low = 1;
-	}
-
-	enable_irq_wake(IRQ_WAKEUP0);
-
-	pxa3xx_set_nand_info(&raumfeld_nand_info);
-	pxa3xx_set_i2c_power_info(NULL);
-	pxa_set_ohci_info(&raumfeld_ohci_info);
-	pxa_set_mci_info(&raumfeld_mci_platform_data);
-	pxa_set_i2c_info(NULL);
-	pxa_set_ffuart_info(NULL);
-
-	ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_W2W_RESET\n");
-	else
-		gpio_direction_output(GPIO_W2W_RESET, 0);
-
-	ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_W2W_PDN\n");
-	else
-		gpio_direction_output(GPIO_W2W_PDN, 0);
-
-	/* this can be used to switch off the device */
-	ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
-	else
-		gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
-
-	gpiod_add_lookup_table(&raumfeld_spi_gpiod_table);
-	platform_add_devices(ARRAY_AND_SIZE(raumfeld_common_devices));
-	i2c_register_board_info(1, &raumfeld_pwri2c_board_info, 1);
-}
-
-static void __init __maybe_unused raumfeld_controller_init(void)
-{
-	int ret;
-
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
-
-	gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
-	device_add_properties(&rotary_encoder_device.dev,
-			      raumfeld_rotary_properties);
-	platform_device_register(&rotary_encoder_device);
-
-	spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
-
-	gpiod_add_lookup_table(&raumfeld_controller_gpios_table);
-	i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
-
-	ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
-	if (ret < 0)
-		pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n");
-	else
-		gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
-
-	raumfeld_common_init();
-	raumfeld_power_init();
-	raumfeld_lcd_init();
-	raumfeld_w1_init();
-}
-
-static void __init __maybe_unused raumfeld_connector_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_connector_pin_config));
-	spi_register_board_info(ARRAY_AND_SIZE(connector_spi_devices));
-	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
-
-	platform_device_register(&smc91x_device);
-
-	raumfeld_audio_init();
-	raumfeld_common_init();
-}
-
-static void __init __maybe_unused raumfeld_speaker_init(void)
-{
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_speaker_pin_config));
-	spi_register_board_info(ARRAY_AND_SIZE(speaker_spi_devices));
-	i2c_register_board_info(0, &raumfeld_connector_i2c_board_info, 1);
-
-	platform_device_register(&smc91x_device);
-
-	gpiod_add_lookup_table(&raumfeld_rotary_gpios_table);
-	device_add_properties(&rotary_encoder_device.dev,
-			      raumfeld_rotary_properties);
-	platform_device_register(&rotary_encoder_device);
-
-	raumfeld_audio_init();
-	raumfeld_common_init();
-}
-
-/* physical memory regions */
-#define	RAUMFELD_SDRAM_BASE	0xa0000000	/* SDRAM region */
-
-#ifdef CONFIG_MACH_RAUMFELD_RC
-MACHINE_START(RAUMFELD_RC, "Raumfeld Controller")
-	.atag_offset	= 0x100,
-	.init_machine	= raumfeld_controller_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_RAUMFELD_CONNECTOR
-MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector")
-	.atag_offset	= 0x100,
-	.init_machine	= raumfeld_connector_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_RAUMFELD_SPEAKER
-MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker")
-	.atag_offset	= 0x100,
-	.init_machine	= raumfeld_speaker_init,
-	.map_io		= pxa3xx_map_io,
-	.nr_irqs	= PXA_NR_IRQS,
-	.init_irq	= pxa3xx_init_irq,
-	.handle_irq	= pxa3xx_handle_irq,
-	.init_time	= pxa_timer_init,
-	.restart	= pxa_restart,
-MACHINE_END
-#endif