Merge tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "It was a calm development cycle. There were an ALSA core extension for
  subformat PCM bits and a few ASoC core changes to support N:M
  mappings, while the most of remaining changes are driver-specific.

  Core:
   - API extensions for properly limiting PCM format bits via subformat
   - Enhanced support for N:M CPU:CODEC mappings in the core and in
     audio-graph-card2

  ASoC:
   - Lots of SOF updates: fallback support to older IPC versions,
     notification on control changes with IPC4. Also supports for ACPI
     parse for the ES83xx driver that reduces quirks.
   - Device tree support for describing parts of the card which can be
     active over suspend (for very low power playback or wake word use
     cases)
   - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
     SM8250, SM8550, SM8650 and X1E80100
   - Drop of Freescale MPC8610 code that is no longer supported

  HD-audio:
   - More CS35L41 codec extensions for Dell, HP and Lenovo models
   - TAS2781 codec extensions for Lenovo and co
   - New PCM subformat supports

  Others:
   - More enhancement for Scarlett2 USB mixer support
   - Various kselftest fixes"

* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
  kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
  kselftest/alsa - mixer-test: Fix the print format specifier warning
  kselftest/alsa - mixer-test: Fix the print format specifier warning
  kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
  ALSA: hda/tas2781: annotate calibration data endianness
  ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
  ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
  ALSA: ac97: fix build regression
  ALSA: hda: cs35l41: Support more HP models without _DSD
  ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
  ALSA: hda/tas2781: add TAS2563 support for 14ARB7
  ALSA: hda/tas2781: add configurable global i2c address
  ALSA: hda/tas2781: add ptrs to calibration functions
  ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
  ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
  ALSA: hda/tas2781: configure the amp after firmware load
  ALSA: mark all struct bus_type as const
  ASoC: pxa: sspa: Don't select SND_ARM
  ASoC: rt5663: cancel the work when system suspends
  ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
  ...

5 files changed, 100 insertions, 30 deletions

diff --git a/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
index 16b374e6482f..8c1d5c9fa483 100644
--- a/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra20-colibri.dtsi
@@ -446,7 +446,7 @@
 	tegra_ac97: ac97@70002000 {
 		status = "okay";
 		nvidia,codec-reset-gpio =
-			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_HIGH>;
+			<&gpio TEGRA_GPIO(V, 0) GPIO_ACTIVE_LOW>;
 		nvidia,codec-sync-gpio =
 			<&gpio TEGRA_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 	};
diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c
index 4b90899a66e9..dbdb822a0100 100644
--- a/arch/arm/mach-ep93xx/edb93xx.c
+++ b/arch/arm/mach-ep93xx/edb93xx.c
@@ -88,7 +88,7 @@ static void __init edb93xx_register_i2c(void)
  * EDB93xx SPI peripheral handling
  *************************************************************************/
 static struct cs4271_platform_data edb93xx_cs4271_data = {
-	.gpio_nreset	= -EINVAL,	/* filled in later */
+	/* Intentionally left blank */
 };
 
 static struct spi_board_info edb93xx_spi_board_info[] __initdata = {
@@ -114,14 +114,38 @@ static struct ep93xx_spi_info edb93xx_spi_info __initdata = {
 	/* Intentionally left blank */
 };
 
+static struct gpiod_lookup_table edb93xx_cs4272_edb9301_gpio_table = {
+	.dev_id = "spi0.0", /* CS0 on SPI0 */
+	.table = {
+		GPIO_LOOKUP("A", 1, "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table edb93xx_cs4272_edb9302_gpio_table = {
+	.dev_id = "spi0.0", /* CS0 on SPI0 */
+	.table = {
+		GPIO_LOOKUP("H", 2, "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
+static struct gpiod_lookup_table edb93xx_cs4272_edb9315_gpio_table = {
+	.dev_id = "spi0.0", /* CS0 on SPI0 */
+	.table = {
+		GPIO_LOOKUP("B", 6, "reset", GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static void __init edb93xx_register_spi(void)
 {
 	if (machine_is_edb9301() || machine_is_edb9302())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO1;
+		gpiod_add_lookup_table(&edb93xx_cs4272_edb9301_gpio_table);
 	else if (machine_is_edb9302a() || machine_is_edb9307a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_H(2);
+		gpiod_add_lookup_table(&edb93xx_cs4272_edb9302_gpio_table);
 	else if (machine_is_edb9315a())
-		edb93xx_cs4271_data.gpio_nreset = EP93XX_GPIO_LINE_EGPIO14;
+		gpiod_add_lookup_table(&edb93xx_cs4272_edb9315_gpio_table);
 
 	gpiod_add_lookup_table(&edb93xx_spi_cs_gpio_table);
 	ep93xx_register_spi(&edb93xx_spi_info, edb93xx_spi_board_info,
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 30d9cf3791eb..9471938df64c 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -164,7 +164,7 @@ static struct i2c_board_info vision_i2c_info[] __initdata = {
  * SPI CS4271 Audio Codec
  *************************************************************************/
 static struct cs4271_platform_data vision_cs4271_data = {
-	.gpio_nreset	= EP93XX_GPIO_LINE_H(2),
+	/* Intentionally left blank */
 };
 
 /*************************************************************************
@@ -241,6 +241,15 @@ static struct spi_board_info vision_spi_board_info[] __initdata = {
 	},
 };
 
+static struct gpiod_lookup_table vision_spi_cs4271_gpio_table = {
+	.dev_id = "spi0.0", /* cs4271 @ CS0 */
+	.table = {
+		/* RESET */
+		GPIO_LOOKUP_IDX("H", 2, NULL, 0, GPIO_ACTIVE_LOW),
+		{ },
+	},
+};
+
 static struct gpiod_lookup_table vision_spi_cs_gpio_table = {
 	.dev_id = "spi0",
 	.table = {
@@ -292,6 +301,7 @@ static void __init vision_init_machine(void)
 
 	ep93xx_register_i2c(vision_i2c_info,
 				ARRAY_SIZE(vision_i2c_info));
+	gpiod_add_lookup_table(&vision_spi_cs4271_gpio_table);
 	gpiod_add_lookup_table(&vision_spi_mmc_gpio_table);
 	gpiod_add_lookup_table(&vision_spi_cs_gpio_table);
 	ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
diff --git a/arch/arm/mach-s3c/mach-crag6410-module.c b/arch/arm/mach-s3c/mach-crag6410-module.c
index 8fce1e815ee8..2de1a89f6e99 100644
--- a/arch/arm/mach-s3c/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c/mach-crag6410-module.c
@@ -32,9 +32,18 @@
 
 #include "crag6410.h"
 
+static struct gpiod_lookup_table wm0010_gpiod_table = {
+	.dev_id = "spi0.0", /* SPI device name */
+	.table = {
+		/* Active high for Glenfarclas Rev 2 */
+		GPIO_LOOKUP("GPION", 6,
+			    "reset", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm0010_pdata wm0010_pdata = {
-	.gpio_reset = S3C64XX_GPN(6),
-	.reset_active_high = 1, /* Active high for Glenfarclas Rev 2 */
+	/* Intentionally left blank */
 };
 
 static struct spi_board_info wm1253_devs[] = {
@@ -61,10 +70,19 @@ static struct spi_board_info balblair_devs[] = {
 	},
 };
 
+static struct gpiod_lookup_table wm5100_gpiod_table = {
+	.dev_id = "1-001a", /* Device 001a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("wm5100", 3,
+			    "hp-pol", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm5100_pdata wm5100_pdata = {
-	.ldo_ena = S3C64XX_GPN(7),
 	.irq_flags = IRQF_TRIGGER_HIGH,
-	.gpio_base = CODEC_GPIO_BASE,
 
 	.in_mode = {
 		WM5100_IN_DIFF,
@@ -73,7 +91,6 @@ static struct wm5100_pdata wm5100_pdata = {
 		WM5100_IN_SE,
 	},
 
-	.hp_pol = CODEC_GPIO_BASE + 3,
 	.jack_modes = {
 		{ WM5100_MICDET_MICBIAS3, 0, 0 },
 		{ WM5100_MICDET_MICBIAS2, 1, 1 },
@@ -110,9 +127,16 @@ static struct wm8996_retune_mobile_config wm8996_retune[] = {
 	},
 };
 
+static struct gpiod_lookup_table wm8996_gpiod_table = {
+	.dev_id = "1-001a", /* Device 001a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static struct wm8996_pdata wm8996_pdata __initdata = {
-	.ldo_ena = S3C64XX_GPN(7),
-	.gpio_base = CODEC_GPIO_BASE,
 	.micdet_def = 1,
 	.inl_mode = WM8996_DIFFERRENTIAL_1,
 	.inr_mode = WM8996_DIFFERRENTIAL_1,
@@ -296,12 +320,20 @@ static const struct i2c_board_info wm6230_i2c_devs[] = {
 };
 
 static struct wm2200_pdata wm2200_pdata = {
-	.ldo_ena = S3C64XX_GPN(7),
 	.gpio_defaults = {
 		[2] = 0x0005,  /* GPIO3 24.576MHz output clock */
 	},
 };
 
+static struct gpiod_lookup_table wm2200_gpiod_table = {
+	.dev_id = "1-003a", /* Device 003a on I2C bus 1 */
+	.table = {
+		GPIO_LOOKUP("GPION", 7,
+			    "wlf,ldo1ena", GPIO_ACTIVE_HIGH),
+		{ },
+	},
+};
+
 static const struct i2c_board_info wm2200_i2c[] = {
 	{ I2C_BOARD_INFO("wm2200", 0x3a),
 	  .platform_data = &wm2200_pdata, },
@@ -337,18 +369,21 @@ static const struct {
 	{ .id = 0x21, .rev = 0xff, .name = "1275-EV1 Mortlach" },
 	{ .id = 0x25, .rev = 0xff, .name = "1274-EV1 Glencadam" },
 	{ .id = 0x31, .rev = 0xff, .name = "1253-EV1 Tomatin",
-	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs) },
+	  .spi_devs = wm1253_devs, .num_spi_devs = ARRAY_SIZE(wm1253_devs),
+	  .gpiod_table = &wm0010_gpiod_table },
 	{ .id = 0x32, .rev = 0xff, .name = "XXXX-EV1 Caol Illa" },
 	{ .id = 0x33, .rev = 0xff, .name = "XXXX-EV1 Oban" },
 	{ .id = 0x34, .rev = 0xff, .name = "WM0010-6320-CS42 Balblair",
 	  .spi_devs = balblair_devs,
 	  .num_spi_devs = ARRAY_SIZE(balblair_devs) },
 	{ .id = 0x39, .rev = 0xff, .name = "1254-EV1 Dallas Dhu",
-	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) },
+	  .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs),
+	  .gpiod_table = &wm8996_gpiod_table },
 	{ .id = 0x3a, .rev = 0xff, .name = "1259-EV1 Tobermory",
 	  .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) },
 	{ .id = 0x3b, .rev = 0xff, .name = "1255-EV1 Kilchoman",
-	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) },
+	  .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs),
+	  .gpiod_table = &wm5100_gpiod_table },
 	{ .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
 	{ .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
 	  .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs),
@@ -362,7 +397,8 @@ static const struct {
 	  .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs),
 	  .gpiod_table = &wm5102_gpiod_table },
 	{ .id = 0x3f, .rev = -1, .name = "WM2200-6271-CS90-M-REV1",
-	  .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c) },
+	  .i2c_devs = wm2200_i2c, .num_i2c_devs = ARRAY_SIZE(wm2200_i2c),
+	  .gpiod_table = &wm2200_gpiod_table },
 };
 
 static int wlf_gf_module_probe(struct i2c_client *i2c)
diff --git a/arch/arm/mach-s3c/mach-crag6410.c b/arch/arm/mach-s3c/mach-crag6410.c
index 7c4bed4370a1..e5df2cb51ab2 100644
--- a/arch/arm/mach-s3c/mach-crag6410.c
+++ b/arch/arm/mach-s3c/mach-crag6410.c
@@ -39,8 +39,6 @@
 #include <linux/mfd/wm831x/irq.h>
 #include <linux/mfd/wm831x/gpio.h>
 
-#include <sound/wm1250-ev1.h>
-
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
@@ -713,13 +711,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata = {
 	.disable_touch = true,
 };
 
-static struct wm1250_ev1_pdata wm1250_ev1_pdata = {
-	.gpios = {
-		[WM1250_EV1_GPIO_CLK_ENA] = S3C64XX_GPN(12),
-		[WM1250_EV1_GPIO_CLK_SEL0] = S3C64XX_GPL(12),
-		[WM1250_EV1_GPIO_CLK_SEL1] = S3C64XX_GPL(13),
-		[WM1250_EV1_GPIO_OSR] = S3C64XX_GPL(14),
-		[WM1250_EV1_GPIO_MASTER] = S3C64XX_GPL(8),
+static struct gpiod_lookup_table crag_wm1250_ev1_gpiod_table = {
+	/* The WM1250-EV1 is device 0027 on I2C bus 1 */
+	.dev_id = "1-0027",
+	.table = {
+		GPIO_LOOKUP("GPION", 12, "clk-ena", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 12, "clk-sel0", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 13, "clk-sel1", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 14, "osr", GPIO_ACTIVE_HIGH),
+		GPIO_LOOKUP("GPIOL", 8, "master", GPIO_ACTIVE_HIGH),
+		{ },
 	},
 };
 
@@ -733,9 +734,7 @@ static struct i2c_board_info i2c_devs1[] = {
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x24) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x25) },
 	{ I2C_BOARD_INFO("wlf-gf-module", 0x26) },
-
-	{ I2C_BOARD_INFO("wm1250-ev1", 0x27),
-	  .platform_data = &wm1250_ev1_pdata },
+	{ I2C_BOARD_INFO("wm1250-ev1", 0x27), },
 };
 
 static struct s3c2410_platform_i2c i2c1_pdata = {
@@ -862,6 +861,7 @@ static void __init crag6410_machine_init(void)
 
 	gpiod_add_lookup_table(&crag_pmic_gpiod_table);
 	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	gpiod_add_lookup_table(&crag_wm1250_ev1_gpiod_table);
 	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
 
 	samsung_keypad_set_platdata(&crag6410_keypad_data);