Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/ethernet/sfc/rx.c

Overlapping changes in drivers/net/ethernet/sfc/rx.c, one to change
the rx_buf->is_page boolean into a set of u16 flags, and another to
adjust how ->ip_summed is initialized.

Signed-off-by: David S. Miller <davem@davemloft.net>

21 files changed, 225 insertions, 118 deletions

diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index d1bcd7b13ebc..fb1f1cfce60c 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -320,13 +320,6 @@ err0:
 	return -EBUSY;
 }
 
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
 /* ITE bridge requires setting latency timer to avoid early bus access
    termination by PCI bus master devices
 */
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index d8e44a43047c..ff3ad2244824 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
 	struct pl330_thread *thrd = ch_id;
 	struct pl330_dmac *pl330;
 	unsigned long flags;
-	int ret = 0, active = thrd->req_running;
+	int ret = 0, active;
 
 	if (!thrd || thrd->free || thrd->dmac->state == DYING)
 		return -EINVAL;
 
 	pl330 = thrd->dmac;
+	active = thrd->req_running;
 
 	spin_lock_irqsave(&pl330->lock, flags);
 
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index 62f8095d46de..23371b17b23e 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -137,6 +137,11 @@
 	disable_irq
 	.endm
 
+	.macro	save_and_disable_irqs_notrace, oldcpsr
+	mrs	\oldcpsr, cpsr
+	disable_irq_notrace
+	.endm
+
 /*
  * Restore interrupt state previously stored in a register.  We don't
  * guarantee that this will preserve the flags.
diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h
index 575fa8186ca0..c1821385abfa 100644
--- a/arch/arm/include/asm/hardware/pl330.h
+++ b/arch/arm/include/asm/hardware/pl330.h
@@ -41,7 +41,7 @@ enum pl330_dstcachectrl {
 	DCCTRL1, /* Bufferable only */
 	DCCTRL2, /* Cacheable, but do not allocate */
 	DCCTRL3, /* Cacheable and bufferable, but do not allocate */
-	DINVALID1 = 8,
+	DINVALID1,              /* AWCACHE = 0x1000 */
 	DINVALID2,
 	DCCTRL6, /* Cacheable write-through, allocate on writes only */
 	DCCTRL7, /* Cacheable write-back, allocate on writes only */
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index ce280b8d613c..cb8d638924fd 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -22,6 +22,7 @@
 #include <asm/hw_breakpoint.h>
 #include <asm/ptrace.h>
 #include <asm/types.h>
+#include <asm/system.h>
 
 #ifdef __KERNEL__
 #define STACK_TOP	((current->personality & ADDR_LIMIT_32BIT) ? \
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index e33870ff0ac0..ede6443c34d9 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -23,6 +23,7 @@
 #include <linux/perf_event.h>
 #include <linux/hw_breakpoint.h>
 #include <linux/regset.h>
+#include <linux/audit.h>
 
 #include <asm/pgtable.h>
 #include <asm/system.h>
@@ -904,6 +905,12 @@ long arch_ptrace(struct task_struct *child, long request,
 	return ret;
 }
 
+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
 asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 {
 	unsigned long ip;
@@ -918,7 +925,7 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
 	if (!ip)
 		audit_syscall_exit(regs);
 	else
-		audit_syscall_entry(AUDIT_ARCH_ARMEB, scno, regs->ARM_r0,
+		audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
 				    regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
 
 	if (!test_thread_flag(TIF_SYSCALL_TRACE))
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index 4285daa077b0..7a79b24597b2 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = {
 
 static int twd_cpufreq_init(void)
 {
-	if (!IS_ERR(twd_clk))
+	if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
 		return cpufreq_register_notifier(&twd_cpufreq_nb,
 			CPUFREQ_TRANSITION_NOTIFIER);
 
diff --git a/arch/arm/mach-omap2/voltagedomains3xxx_data.c b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
index c005e2f5e383..57db2038b23c 100644
--- a/arch/arm/mach-omap2/voltagedomains3xxx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains3xxx_data.c
@@ -108,6 +108,7 @@ void __init omap3xxx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	if (cpu_is_omap3630()) {
 		omap3_voltdm_mpu.volt_data = omap36xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap36xx_vddcore_volt_data;
@@ -115,6 +116,7 @@ void __init omap3xxx_voltagedomains_init(void)
 		omap3_voltdm_mpu.volt_data = omap34xx_vddmpu_volt_data;
 		omap3_voltdm_core.volt_data = omap34xx_vddcore_volt_data;
 	}
+#endif
 
 	if (cpu_is_omap3517() || cpu_is_omap3505())
 		voltdms = voltagedomains_am35xx;
diff --git a/arch/arm/mach-omap2/voltagedomains44xx_data.c b/arch/arm/mach-omap2/voltagedomains44xx_data.c
index 4e11d022595d..c3115f6853d4 100644
--- a/arch/arm/mach-omap2/voltagedomains44xx_data.c
+++ b/arch/arm/mach-omap2/voltagedomains44xx_data.c
@@ -100,9 +100,11 @@ void __init omap44xx_voltagedomains_init(void)
 	 * XXX Will depend on the process, validation, and binning
 	 * for the currently-running IC
 	 */
+#ifdef CONFIG_PM_OPP
 	omap4_voltdm_mpu.volt_data = omap44xx_vdd_mpu_volt_data;
 	omap4_voltdm_iva.volt_data = omap44xx_vdd_iva_volt_data;
 	omap4_voltdm_core.volt_data = omap44xx_vdd_core_volt_data;
+#endif
 
 	for (i = 0; voltdm = voltagedomains_omap4[i], voltdm; i++)
 		voltdm->sys_clk.name = sys_clk_name;
diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c
index eff8a96c75ee..068b754bc348 100644
--- a/arch/arm/mach-shmobile/board-ag5evm.c
+++ b/arch/arm/mach-shmobile/board-ag5evm.c
@@ -30,6 +30,7 @@
 #include <linux/serial_sci.h>
 #include <linux/smsc911x.h>
 #include <linux/gpio.h>
+#include <linux/videodev2.h>
 #include <linux/input.h>
 #include <linux/input/sh_keysc.h>
 #include <linux/mmc/host.h>
@@ -37,7 +38,6 @@
 #include <linux/mmc/sh_mobile_sdhi.h>
 #include <linux/mfd/tmio.h>
 #include <linux/sh_clk.h>
-#include <linux/dma-mapping.h>
 #include <video/sh_mobile_lcdc.h>
 #include <video/sh_mipi_dsi.h>
 #include <sound/sh_fsi.h>
@@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
 static struct sh_mmcif_plat_data sh_mmcif_platdata = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195,
 	.caps		= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device mmc_device = {
@@ -321,12 +314,11 @@ static struct resource mipidsi0_resources[] = {
 	},
 };
 
-#define DSI0PHYCR	0xe615006c
 static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 				 void __iomem *base,
 				 int enable)
 {
-	struct clk *pck;
+	struct clk *pck, *phy;
 	int ret;
 
 	pck = clk_get(&pdev->dev, "dsip_clk");
@@ -335,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev,
 		goto sh_mipi_set_dot_clock_pck_err;
 	}
 
+	phy = clk_get(&pdev->dev, "dsiphy_clk");
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		goto sh_mipi_set_dot_clock_phy_err;
+	}
+
 	if (enable) {
 		clk_set_rate(pck, clk_round_rate(pck,  24000000));
-		__raw_writel(0x2a809010, DSI0PHYCR);
+		clk_set_rate(phy, clk_round_rate(pck, 510000000));
 		clk_enable(pck);
+		clk_enable(phy);
 	} else {
 		clk_disable(pck);
+		clk_disable(phy);
 	}
 
 	ret = 0;
 
+	clk_put(phy);
+sh_mipi_set_dot_clock_phy_err:
 	clk_put(pck);
-
 sh_mipi_set_dot_clock_pck_err:
 	return ret;
 }
diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index aab0a349f759..eeb4d9664584 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c
index 857ceeec1bb0..c8e7ca23fc06 100644
--- a/arch/arm/mach-shmobile/board-kota2.c
+++ b/arch/arm/mach-shmobile/board-kota2.c
@@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = {
 static struct gpio_keys_platform_data gpio_key_info = {
 	.buttons        = gpio_buttons,
 	.nbuttons       = ARRAY_SIZE(gpio_buttons),
-	.poll_interval  = 250, /* polled for now */
 };
 
 static struct platform_device gpio_keys_device = {
-	.name   = "gpio-keys-polled", /* polled for now */
+	.name   = "gpio-keys",
 	.id     = -1,
 	.dev    = {
 		.platform_data  = &gpio_key_info,
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 9b42fbd10f8e..a2813247b455 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -43,7 +43,6 @@
 #include <linux/smsc911x.h>
 #include <linux/sh_intc.h>
 #include <linux/tca6416_keypad.h>
-#include <linux/usb/r8a66597.h>
 #include <linux/usb/renesas_usbhs.h>
 #include <linux/dma-mapping.h>
 
@@ -145,11 +144,6 @@
  * 1-2 short | VBUS 5V       | Host
  * open      | external VBUS | Function
  *
- * *1
- * CN31 is used as
- * CONFIG_USB_R8A66597_HCD	Host
- * CONFIG_USB_RENESAS_USBHS	Function
- *
  * CAUTION
  *
  * renesas_usbhs driver can use external interrupt mode
@@ -161,15 +155,6 @@
  * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0",
  * because Touchscreen is using IRQ7-PORT40.
  * It is impossible to use IRQ7 demux on this board.
- *
- * We can use external interrupt mode USB-Function on "USB1".
- * USB1 can become Host by r8a66597, and become Function by renesas_usbhs.
- * But don't select both drivers in same time.
- * These uses same IRQ number for request_irq(), and aren't supporting
- * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE.
- *
- * Actually these are old/new version of USB driver.
- * This mean its register will be broken if it supports shared IRQ,
  */
 
 /*
@@ -208,6 +193,16 @@
  */
 
 /*
+ * FSI - AK4642
+ *
+ * it needs amixer settings for playing
+ *
+ * amixer set "Headphone" on
+ * amixer set "HPOUTL Mixer DACH" on
+ * amixer set "HPOUTR Mixer DACH" on
+ */
+
+/*
  * FIXME !!
  *
  * gpio_no_direction
@@ -676,51 +671,16 @@ static struct platform_device usbhs0_device = {
  * Use J30 to select between Host and Function. This setting
  * can however not be detected by software. Hotplug of USBHS1
  * is provided via IRQ8.
+ *
+ * Current USB1 works as "USB Host".
+ *  - set J30 "short"
+ *
+ * If you want to use it as "USB gadget",
+ *  - J30 "open"
+ *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
+ *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
  */
 #define IRQ8 evt2irq(0x0300)
-
-/* USBHS1 USB Host support via r8a66597_hcd */
-static void usb1_host_port_power(int port, int power)
-{
-	if (!power) /* only power-on is supported for now */
-		return;
-
-	/* set VBOUT/PWEN and EXTLP1 in DVSTCTR */
-	__raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008);
-}
-
-static struct r8a66597_platdata usb1_host_data = {
-	.on_chip	= 1,
-	.port_power	= usb1_host_port_power,
-};
-
-static struct resource usb1_host_resources[] = {
-	[0] = {
-		.name	= "USBHS1",
-		.start	= 0xe68b0000,
-		.end	= 0xe68b00e6 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= evt2irq(0x1ce0) /* USB1_USB1I0 */,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device usb1_host_device = {
-	.name	= "r8a66597_hcd",
-	.id	= 1,
-	.dev = {
-		.dma_mask		= NULL,         /*  not use dma */
-		.coherent_dma_mask	= 0xffffffff,
-		.platform_data		= &usb1_host_data,
-	},
-	.num_resources	= ARRAY_SIZE(usb1_host_resources),
-	.resource	= usb1_host_resources,
-};
-
-/* USBHS1 USB Function support via renesas_usbhs */
-
 #define USB_PHY_MODE		(1 << 4)
 #define USB_PHY_INT_EN		((1 << 3) | (1 << 2))
 #define USB_PHY_ON		(1 << 1)
@@ -776,7 +736,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev)
 
 static int usbhs1_get_id(struct platform_device *pdev)
 {
-	return USBHS_GADGET;
+	return USBHS_HOST;
 }
 
 static u32 usbhs1_pipe_cfg[] = {
@@ -807,7 +767,6 @@ static struct usbhs_private usbhs1_private = {
 			.hardware_exit	= usbhs1_hardware_exit,
 			.get_id		= usbhs1_get_id,
 			.phy_reset	= usbhs_phy_reset,
-			.get_vbus	= usbhs_get_vbus,
 		},
 		.driver_param = {
 			.buswait_bwait	= 4,
@@ -1184,15 +1143,6 @@ static struct resource sh_mmcif_resources[] = {
 	},
 };
 
-static struct sh_mmcif_dma sh_mmcif_dma = {
-	.chan_priv_rx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_RX,
-	},
-	.chan_priv_tx	= {
-		.slave_id	= SHDMA_SLAVE_MMCIF_TX,
-	},
-};
-
 static struct sh_mmcif_plat_data sh_mmcif_plat = {
 	.sup_pclk	= 0,
 	.ocr		= MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -1200,7 +1150,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = {
 			  MMC_CAP_8_BIT_DATA |
 			  MMC_CAP_NEEDS_POLL,
 	.get_cd		= slot_cn7_get_cd,
-	.dma		= &sh_mmcif_dma,
+	.slave_id_tx	= SHDMA_SLAVE_MMCIF_TX,
+	.slave_id_rx	= SHDMA_SLAVE_MMCIF_RX,
 };
 
 static struct platform_device sh_mmcif_device = {
@@ -1311,7 +1262,6 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usb1_host_device,
 	&usbhs1_device,
 	&usbhs0_device,
 	&leds_device,
@@ -1473,9 +1423,6 @@ static void __init mackerel_init(void)
 	gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */
 	gpio_request(GPIO_FN_IDIN_1_113, NULL);
 
-	/* USB phy tweak to make the r8a66597_hcd host driver work */
-	__raw_writew(0x8a0a, 0xe6058130);       /* USBCR4 */
-
 	/* enable FSI2 port A (ak4643) */
 	gpio_request(GPIO_FN_FSIAIBT,	NULL);
 	gpio_request(GPIO_FN_FSIAILR,	NULL);
diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c
index afbead6a6e17..7727cca6136c 100644
--- a/arch/arm/mach-shmobile/clock-sh73a0.c
+++ b/arch/arm/mach-shmobile/clock-sh73a0.c
@@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = {
 			dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3),
 };
 
+/* DSI DIV */
+static unsigned long dsiphy_recalc(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+
+	/* FIXME */
+	if (!(value & 0x000B8000))
+		return clk->parent->rate;
+
+	value &= 0x3f;
+	value += 1;
+
+	if ((value < 12) ||
+	    (value > 33)) {
+		pr_err("DSIPHY has wrong value (%d)", value);
+		return 0;
+	}
+
+	return clk->parent->rate / value;
+}
+
+static long dsiphy_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_mult_range_round(clk, 12, 33, rate);
+}
+
+static void dsiphy_disable(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+	value &= ~0x000B8000;
+
+	__raw_writel(value , clk->mapping->base);
+}
+
+static int dsiphy_enable(struct clk *clk)
+{
+	u32 value;
+	int multi;
+
+	value = __raw_readl(clk->mapping->base);
+	multi = (value & 0x3f) + 1;
+
+	if ((multi < 12) || (multi > 33))
+		return -EIO;
+
+	__raw_writel(value | 0x000B8000, clk->mapping->base);
+
+	return 0;
+}
+
+static int dsiphy_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 value;
+	int idx;
+
+	idx = rate / clk->parent->rate;
+	if ((idx < 12) || (idx > 33))
+		return -EINVAL;
+
+	idx += -1;
+
+	value = __raw_readl(clk->mapping->base);
+	value = (value & ~0x3f) + idx;
+
+	__raw_writel(value, clk->mapping->base);
+
+	return 0;
+}
+
+static struct clk_ops dsiphy_clk_ops = {
+	.recalc		= dsiphy_recalc,
+	.round_rate	= dsiphy_round_rate,
+	.set_rate	= dsiphy_set_rate,
+	.enable		= dsiphy_enable,
+	.disable	= dsiphy_disable,
+};
+
+static struct clk_mapping dsi0phy_clk_mapping = {
+	.phys	= DSI0PHYCR,
+	.len	= 4,
+};
+
+static struct clk_mapping dsi1phy_clk_mapping = {
+	.phys	= DSI1PHYCR,
+	.len	= 4,
+};
+
+static struct clk dsi0phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI0P], /* late install */
+	.mapping	= &dsi0phy_clk_mapping,
+};
+
+static struct clk dsi1phy_clk = {
+	.ops		= &dsiphy_clk_ops,
+	.parent		= &div6_clks[DIV6_DSI1P], /* late install */
+	.mapping	= &dsi1phy_clk_mapping,
+};
+
+static struct clk *late_main_clks[] = {
+	&dsi0phy_clk,
+	&dsi1phy_clk,
+};
+
 enum { MSTP001,
 	MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
 	MSTP219,
@@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]),
 	CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk),
+	CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk),
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */
@@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void)
 	if (!ret)
 		ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR);
 
+	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
+		ret = clk_register(late_main_clks[k]);
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h
index 881d515a9686..cad57578ceed 100644
--- a/arch/arm/mach-shmobile/include/mach/sh73a0.h
+++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h
@@ -515,8 +515,8 @@ enum {
 	SHDMA_SLAVE_MMCIF_RX,
 };
 
-/* PINT interrupts are located at Linux IRQ 768 and up */
-#define SH73A0_PINT0_IRQ(irq) ((irq) + 768)
-#define SH73A0_PINT1_IRQ(irq) ((irq) + 800)
+/* PINT interrupts are located at Linux IRQ 800 and up */
+#define SH73A0_PINT0_IRQ(irq) ((irq) + 800)
+#define SH73A0_PINT1_IRQ(irq) ((irq) + 832)
 
 #endif /* __ASM_SH73A0_H__ */
diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c
index 1eda6b0b69e3..9857595eaa79 100644
--- a/arch/arm/mach-shmobile/intc-sh73a0.c
+++ b/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -19,6 +19,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 #include <linux/sh_intc.h>
@@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void)
 		setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]);
 
 		n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k)));
+		WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n);
 		irq_set_chip_and_handler_name(n, &intca_gic_irq_chip,
 					      handle_level_irq, "level");
 		set_irq_flags(n, IRQF_VALID); /* yuck */
diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index 963532f2b2c4..d14c9b048077 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -2120,7 +2120,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 	    FN_AUDATA3, 0, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR4", 0xfffc0030, 32,
-			     3, 1, 1, 1, 1, 1, 1, 3, 3, 1,
+			     3, 1, 1, 1, 1, 1, 1, 3, 3,
 			     1, 1, 1, 1, 1, 1, 3, 3, 3, 2) {
 	    /* IP4_31_29 [3] */
 	    FN_DU1_DB0, FN_VI2_DATA4_VI2_B4, FN_SCL2_B, FN_SD3_DAT0,
diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c
index 1bd6585a6acf..336093f9210a 100644
--- a/arch/arm/mach-shmobile/pfc-sh7372.c
+++ b/arch/arm/mach-shmobile/pfc-sh7372.c
@@ -23,6 +23,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/gpio.h>
+#include <mach/irqs.h>
 #include <mach/sh7372.h>
 
 #define CPU_ALL_PORT(fn, pfx, sfx) \
@@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = {
 	{ },
 };
 
+#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5))
+#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5))
+static struct pinmux_irq pinmux_irqs[] = {
+	PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0),
+	PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0),
+	PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0),
+};
+
 static struct pinmux_info sh7372_pinmux_info = {
 	.name = "sh7372_pfc",
 	.reserved_id = PINMUX_RESERVED,
@@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = {
 
 	.gpio_data = pinmux_data,
 	.gpio_data_size = ARRAY_SIZE(pinmux_data),
+
+	.gpio_irq = pinmux_irqs,
+	.gpio_irq_size = ARRAY_SIZE(pinmux_irqs),
 };
 
 void sh7372_pinmux_init(void)
diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c
index 0d159d64a345..2d0d4212be41 100644
--- a/arch/arm/mach-shmobile/smp-sh73a0.c
+++ b/arch/arm/mach-shmobile/smp-sh73a0.c
@@ -80,7 +80,7 @@ int __cpuinit sh73a0_boot_secondary(unsigned int cpu)
 	/* enable cache coherency */
 	modify_scu_cpu_psr(0, 3 << (cpu * 8));
 
-	if (((__raw_readw(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
+	if (((__raw_readl(__io(PSTR)) >> (4 * cpu)) & 3) == 3)
 		__raw_writel(1 << cpu, __io(WUPCR));	/* wake up */
 	else
 		__raw_writel(1 << cpu, __io(SRESCR));	/* reset */
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 1a3ca2488164..7edef9121632 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -631,7 +631,8 @@ comment "Processor Features"
 
 config ARM_LPAE
 	bool "Support for the Large Physical Address Extension"
-	depends on MMU && CPU_V7
+	depends on MMU && CPU_32v7 && !CPU_32v6 && !CPU_32v5 && \
+		!CPU_32v4 && !CPU_32v3
 	help
 	  Say Y if you have an ARMv7 processor supporting the LPAE page
 	  table format and you would like to access memory beyond the
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 7a24d39661f0..a655d3da386d 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -55,7 +55,7 @@ loop1:
 	cmp	r1, #2				@ see what cache we have at this level
 	blt	skip				@ skip if no cache, or just i-cache
 #ifdef CONFIG_PREEMPT
-	save_and_disable_irqs r9		@ make cssr&csidr read atomic
+	save_and_disable_irqs_notrace r9	@ make cssr&csidr read atomic
 #endif
 	mcr	p15, 2, r10, c0, c0, 0		@ select current cache level in cssr
 	isb					@ isb to sych the new cssr&csidr