Merge tag 'gnss-4.20-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/gnss into char-misc-linus

Johan writes:

GNSS fixes for v4.20-rc3

The two serdev drivers were using the wrong timeout argument when
expecting the serdev_device_write() helper to wait indefinitely,
something which could result in incomplete writes when the controller
write buffer was getting full.

Signed-off-by: Johan Hovold <johan@kernel.org>

7 files changed, 12 insertions, 8 deletions

diff --git a/arch/arm/boot/dts/imx53-ppd.dts b/arch/arm/boot/dts/imx53-ppd.dts
index b560ff88459b..5ff9a179c83c 100644
--- a/arch/arm/boot/dts/imx53-ppd.dts
+++ b/arch/arm/boot/dts/imx53-ppd.dts
@@ -55,7 +55,7 @@
 	};
 
 	chosen {
-		stdout-path = "&uart1:115200n8";
+		stdout-path = "serial0:115200n8";
 	};
 
 	memory@70000000 {
diff --git a/arch/arm/boot/dts/imx6sll.dtsi b/arch/arm/boot/dts/imx6sll.dtsi
index ed9a980bce85..beefa1b2049d 100644
--- a/arch/arm/boot/dts/imx6sll.dtsi
+++ b/arch/arm/boot/dts/imx6sll.dtsi
@@ -740,7 +740,7 @@
 			i2c1: i2c@21a0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "fs,imx6sll-i2c", "fsl,imx21-i2c";
+				compatible = "fsl,imx6sll-i2c", "fsl,imx21-i2c";
 				reg = <0x021a0000 0x4000>;
 				interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clks IMX6SLL_CLK_I2C1>;
diff --git a/arch/arm/boot/dts/imx6sx-sdb.dtsi b/arch/arm/boot/dts/imx6sx-sdb.dtsi
index 53b3408b5fab..7d7d679945d2 100644
--- a/arch/arm/boot/dts/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/imx6sx-sdb.dtsi
@@ -117,7 +117,9 @@
 		regulator-name = "enet_3v3";
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		gpio = <&gpio2 6 GPIO_ACTIVE_LOW>;
+		regulator-boot-on;
+		regulator-always-on;
 	};
 
 	reg_pcie_gpio: regulator-pcie-gpio {
@@ -180,6 +182,7 @@
 	phy-supply = <&reg_enet_3v3>;
 	phy-mode = "rgmii";
 	phy-handle = <&ethphy1>;
+	phy-reset-gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
 	status = "okay";
 
 	mdio {
@@ -373,6 +376,8 @@
 				MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3	0x3081
 				MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081
 				MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91
+				/* phy reset */
+				MX6SX_PAD_ENET2_CRS__GPIO2_IO_7		0x10b0
 			>;
 		};
 
diff --git a/arch/arm/boot/dts/vf610m4-colibri.dts b/arch/arm/boot/dts/vf610m4-colibri.dts
index 41ec66a96990..ca6249558760 100644
--- a/arch/arm/boot/dts/vf610m4-colibri.dts
+++ b/arch/arm/boot/dts/vf610m4-colibri.dts
@@ -50,8 +50,8 @@
 	compatible = "fsl,vf610m4";
 
 	chosen {
-		bootargs = "console=ttyLP2,115200 clk_ignore_unused init=/linuxrc rw";
-		stdout-path = "&uart2";
+		bootargs = "clk_ignore_unused init=/linuxrc rw";
+		stdout-path = "serial2:115200";
 	};
 
 	memory@8c000000 {
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 1c7616815a86..63af6234c1b6 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -1,7 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
 CONFIG_CGROUPS=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EMBEDDED=y
diff --git a/arch/arm/include/asm/pgtable-2level.h b/arch/arm/include/asm/pgtable-2level.h
index 92fd2c8a9af0..12659ce5c1f3 100644
--- a/arch/arm/include/asm/pgtable-2level.h
+++ b/arch/arm/include/asm/pgtable-2level.h
@@ -10,7 +10,7 @@
 #ifndef _ASM_PGTABLE_2LEVEL_H
 #define _ASM_PGTABLE_2LEVEL_H
 
-#define __PAGETABLE_PMD_FOLDED
+#define __PAGETABLE_PMD_FOLDED 1
 
 /*
  * Hardware-wise, we have a two level page table structure, where the first
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 6fe52819e014..339eb17c9808 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -112,7 +112,7 @@ ENTRY(cpu_v7_hvc_switch_mm)
 	hvc	#0
 	ldmfd	sp!, {r0 - r3}
 	b	cpu_v7_switch_mm
-ENDPROC(cpu_v7_smc_switch_mm)
+ENDPROC(cpu_v7_hvc_switch_mm)
 #endif
 ENTRY(cpu_v7_iciallu_switch_mm)
 	mov	r3, #0