Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2020-06-05 05:02:14 +0200
committer: Linus Torvalds <torvalds@linux-foundation.org> 2020-06-05 05:02:14 +0200
commit: 9d71d3cd9ef040c284506648285915e9ba4d08c4 (patch)
tree: 3baeb9955b01b1d5145389a6976ed6b69ded096f /arch/arm
parent: Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/... (diff)
parent: Merge tag 'zynqmp-dt-for-v5.8' of https://github.com/Xilinx/linux-xlnx into a... (diff)
download: linux-9d71d3cd9ef040c284506648285915e9ba4d08c4.tar.xz
linux-9d71d3cd9ef040c284506648285915e9ba4d08c4.zip
238 files changed, 12202 insertions, 2831 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index e8dd99201397..e6a1cac0bfc7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -55,6 +55,7 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
 	at91-nattis-2-natte-2.dtb \
 	at91-sama5d27_som1_ek.dtb \
 	at91-sama5d27_wlsom1_ek.dtb \
+	at91-sama5d2_icp.dtb \
 	at91-sama5d2_ptc_ek.dtb \
 	at91-sama5d2_xplained.dtb \
 	at91-sama5d3_xplained.dtb \
@@ -181,6 +182,7 @@ dtb-$(CONFIG_ARCH_EXYNOS3) += \
 	exynos3250-monk.dtb \
 	exynos3250-rinato.dtb
 dtb-$(CONFIG_ARCH_EXYNOS4) += \
+	exynos4210-i9100.dtb \
 	exynos4210-origen.dtb \
 	exynos4210-smdkv310.dtb \
 	exynos4210-trats.dtb \
@@ -237,6 +239,7 @@ dtb-$(CONFIG_ARCH_HIX5HD2) += \
 	hisi-x5hd2-dkb.dtb
 dtb-$(CONFIG_ARCH_INTEGRATOR) += \
 	integratorap.dtb \
+	integratorap-im-pd1.dtb \
 	integratorcp.dtb
 dtb-$(CONFIG_ARCH_IXP4XX) += \
 	intel-ixp42x-linksys-nslu2.dtb \
@@ -279,6 +282,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
 	kirkwood-iomega_ix2_200.dtb \
 	kirkwood-is2.dtb \
 	kirkwood-km_kirkwood.dtb \
+	kirkwood-l-50.dtb \
 	kirkwood-laplug.dtb \
 	kirkwood-linkstation-lsqvl.dtb \
 	kirkwood-linkstation-lsvl.dtb \
@@ -412,6 +416,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-aristainetos2_4.dtb \
 	imx6dl-aristainetos2_7.dtb \
 	imx6dl-colibri-eval-v3.dtb \
+	imx6dl-colibri-v1_1-eval-v3.dtb \
 	imx6dl-cubox-i.dtb \
 	imx6dl-cubox-i-emmc-som-v15.dtb \
 	imx6dl-cubox-i-som-v15.dtb \
@@ -832,6 +837,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
 	am57xx-beagle-x15.dtb \
 	am57xx-beagle-x15-revb1.dtb \
 	am57xx-beagle-x15-revc.dtb \
+	am5729-beagleboneai.dtb \
 	am57xx-cl-som-am57x.dtb \
 	am57xx-sbc-am57x.dtb \
 	am572x-idk.dtb \
@@ -896,6 +902,9 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 dtb-$(CONFIG_ARCH_RDA) += \
 	rda8810pl-orangepi-2g-iot.dtb \
 	rda8810pl-orangepi-i96.dtb
+dtb-$(CONFIG_ARCH_REALTEK) += \
+	rtd1195-horseradish.dtb \
+	rtd1195-mele-x1000.dtb
 dtb-$(CONFIG_ARCH_REALVIEW) += \
 	arm-realview-pb1176.dtb \
 	arm-realview-pb11mp.dtb \
@@ -917,6 +926,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
 	r7s9210-rza2mevb.dtb \
 	r8a73a4-ape6evm.dtb \
 	r8a7740-armadillo800eva.dtb \
+	r8a7742-iwg21d-q7.dtb \
 	r8a7743-iwg20d-q7.dtb \
 	r8a7743-iwg20d-q7-dbcm-ca.dtb \
 	r8a7743-sk-rzg1m.dtb \
@@ -1029,11 +1039,15 @@ dtb-$(CONFIG_ARCH_STM32) += \
 	stm32h743i-eval.dtb \
 	stm32h743i-disco.dtb \
 	stm32mp157a-avenger96.dtb \
+	stm32mp157a-dhcor-avenger96.dtb \
 	stm32mp157a-dk1.dtb \
+	stm32mp157a-iot-box.dtb \
+	stm32mp157a-stinger96.dtb \
 	stm32mp157c-dhcom-pdk2.dtb \
 	stm32mp157c-dk2.dtb \
 	stm32mp157c-ed1.dtb \
-	stm32mp157c-ev1.dtb
+	stm32mp157c-ev1.dtb \
+	stm32mp157c-lxa-mc1.dtb
 dtb-$(CONFIG_MACH_SUN4I) += \
 	sun4i-a10-a1000.dtb \
 	sun4i-a10-ba10-tvbox.dtb \
@@ -1110,6 +1124,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-olimex-som204-evb.dtb \
 	sun7i-a20-olimex-som204-evb-emmc.dtb \
 	sun7i-a20-olinuxino-lime.dtb \
+	sun7i-a20-olinuxino-lime-emmc.dtb \
 	sun7i-a20-olinuxino-lime2.dtb \
 	sun7i-a20-olinuxino-lime2-emmc.dtb \
 	sun7i-a20-olinuxino-micro.dtb \
@@ -1339,6 +1354,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-facebook-wedge40.dtb \
 	aspeed-bmc-facebook-wedge100.dtb \
 	aspeed-bmc-facebook-yamp.dtb \
+	aspeed-bmc-facebook-yosemitev2.dtb \
 	aspeed-bmc-ibm-rainier.dtb \
 	aspeed-bmc-intel-s2600wf.dtb \
 	aspeed-bmc-inspur-fp5280g2.dtb \
@@ -1347,6 +1363,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-microsoft-olympus.dtb \
 	aspeed-bmc-opp-lanyang.dtb \
 	aspeed-bmc-opp-mihawk.dtb \
+	aspeed-bmc-opp-nicole.dtb \
 	aspeed-bmc-opp-palmetto.dtb \
 	aspeed-bmc-opp-romulus.dtb \
 	aspeed-bmc-opp-swift.dtb \
diff --git a/arch/arm/boot/dts/am571x-idk.dts b/arch/arm/boot/dts/am571x-idk.dts
index c13756fa0f55..99a408a2ec6a 100644
--- a/arch/arm/boot/dts/am571x-idk.dts
+++ b/arch/arm/boot/dts/am571x-idk.dts
@@ -10,6 +10,7 @@
 #include "dra7-mmc-iodelay.dtsi"
 #include "dra72x-mmc-iodelay.dtsi"
 #include "am57xx-idk-common.dtsi"
+#include "dra7-ipu-dsp-common.dtsi"
 
 / {
 	model = "TI AM5718 IDK";
@@ -20,6 +21,33 @@
 		reg = <0x0 0x80000000 0x0 0x40000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 		cpu0-led {
@@ -148,21 +176,19 @@
 	load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
 };
 
-&mailbox5 {
+&ipu2 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
+	memory-region = <&ipu2_memory_region>;
 };
 
-&mailbox6 {
+&ipu1 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
 };
 
 &pcie1_rc {
diff --git a/arch/arm/boot/dts/am5729-beagleboneai.dts b/arch/arm/boot/dts/am5729-beagleboneai.dts
new file mode 100644
index 000000000000..9877d7709d41
--- /dev/null
+++ b/arch/arm/boot/dts/am5729-beagleboneai.dts
@@ -0,0 +1,731 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2014-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include "am57xx-commercial-grade.dtsi"
+#include "dra74x-mmc-iodelay.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/dra.h>
+
+/ {
+	model = "BeagleBoard.org BeagleBone AI";
+	compatible = "beagle,am5729-beagleboneai", "ti,am5728",
+		     "ti,dra742", "ti,dra74", "ti,dra7";
+
+	aliases {
+		rtc0 = &tps659038_rtc;
+		rtc1 = &rtc;
+		display0 = &hdmi_conn;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+
+	};
+
+	vdd_adc: gpioregulator-vdd_adc {
+		compatible = "regulator-gpio";
+		regulator-name = "vdd_adc";
+		vin-supply = <&vdd_5v>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0
+			3300000 1>;
+	};
+
+	vdd_5v: fixedregulator-vdd_5v {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vtt_fixed: fixedregulator-vtt {
+		/* TPS51200 */
+		compatible = "regulator-fixed";
+		regulator-name = "vtt_fixed";
+		vin-supply = <&vdd_ddr>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			label = "beaglebone:green:usr0";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led1 {
+			label = "beaglebone:green:usr1";
+			gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "beaglebone:green:usr2";
+			gpios = <&gpio3 15 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "cpu";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "beaglebone:green:usr3";
+			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "beaglebone:green:usr4";
+			gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "netdev";
+			default-state = "off";
+		};
+	};
+
+	hdmi_conn: connector@0 {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_encoder_out>;
+			};
+		};
+	};
+
+	hdmi_enc: encoder@0 {
+		/* "ti,tpd12s016" software compatible with "ti,tpd12s015"
+		 *  no need for individual driver
+		 */
+		compatible = "ti,tpd12s015";
+		gpios = <0>,
+			<0>,
+			<&gpio7 12 GPIO_ACTIVE_HIGH>;
+
+		ports {
+			#address-cells = <0x1>;
+			#size-cells = <0x0>;
+
+			port@0 {
+				reg = <0x0>;
+
+				hdmi_encoder_in: endpoint@0 {
+					remote-endpoint = <&hdmi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <0x1>;
+
+				hdmi_encoder_out: endpoint@0 {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+
+	emmc_pwrseq: emmc_pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
+	};
+
+	brcmf_pwrseq: brcmf_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>,	/* BT-REG-ON */
+				<&gpio3 18 GPIO_ACTIVE_LOW>;	/* WL-REG-ON */
+	};
+
+	extcon_usb1: extcon_usb1 {
+		compatible = "linux,extcon-usb-gpio";
+		ti,enable-id-detection;
+		id-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	tps659038: tps659038@58 {
+		compatible = "ti,tps659038";
+		reg = <0x58>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+
+		#interrupt-cells = <2>;
+		interrupt-controller;
+
+		ti,system-power-controller;
+		ti,palmas-override-powerhold;
+
+		tps659038_pmic {
+			compatible = "ti,tps659038-pmic";
+
+			smps12-in-supply = <&vdd_5v>;
+			smps3-in-supply = <&vdd_5v>;
+			smps45-in-supply = <&vdd_5v>;
+			smps6-in-supply = <&vdd_5v>;
+			smps7-in-supply = <&vdd_5v>;
+			mps3-in-supply = <&vdd_5v>;
+			smps8-in-supply = <&vdd_5v>;
+			smps9-in-supply = <&vdd_5v>;
+			ldo1-in-supply = <&vdd_5v>;
+			ldo2-in-supply = <&vdd_5v>;
+			ldo3-in-supply = <&vdd_5v>;
+			ldo4-in-supply = <&vdd_5v>;
+			ldo9-in-supply = <&vdd_5v>;
+			ldoln-in-supply = <&vdd_5v>;
+			ldousb-in-supply = <&vdd_5v>;
+			ldortc-in-supply = <&vdd_5v>;
+
+			regulators {
+				vdd_mpu: smps12 {
+					/* VDD_MPU */
+					regulator-name = "smps12";
+					regulator-min-microvolt = <850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_ddr: smps3 {
+					/* VDD_DDR EMIF1 EMIF2 */
+					regulator-name = "smps3";
+					regulator-min-microvolt = <1350000>;
+					regulator-max-microvolt = <1350000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_dspeve: smps45 {
+					/* VDD_DSPEVE on AM572 */
+					regulator-name = "smps45";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_gpu: smps6 {
+					/* VDD_GPU */
+					regulator-name = "smps6";
+					regulator-min-microvolt = < 850000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_core: smps7 {
+					/* VDD_CORE */
+					regulator-name = "smps7";
+					regulator-min-microvolt = < 850000>;	/*** 1.15V */
+					regulator-max-microvolt = <1150000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_iva: smps8 {
+					/* VDD_IVAHD */				/*** 1.06V */
+					regulator-name = "smps8";
+				};
+
+				vdd_3v3: smps9 {
+					/* VDD_3V3 */
+					regulator-name = "smps9";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_sd: ldo1 {
+					/* VDDSHV8 - VSDMMC  */
+					regulator-name = "ldo1";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				vdd_1v8: ldo2 {
+					/* VDDSH18V */
+					regulator-name = "ldo2";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_phy_ldo3: ldo3 {
+					/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
+					regulator-name = "ldo3";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_phy_ldo4: ldo4 {
+					/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
+					regulator-name = "ldo4";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				/* LDO5-8 unused */
+
+				vdd_rtc: ldo9 {
+					/* VDD_RTC  */
+					regulator-name = "ldo9";
+					regulator-min-microvolt = < 840000>;
+					regulator-max-microvolt = <1160000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				vdd_1v8_pll: ldoln {
+					/* VDDA_1V8_PLL */
+					regulator-name = "ldoln";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldousb_reg: ldousb {
+					/* VDDA_3V_USB: VDDA_USBHS33 */
+					regulator-name = "ldousb";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				ldortc_reg: ldortc {
+					/* VDDA_RTC  */
+					regulator-name = "ldortc";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+					regulator-boot-on;
+				};
+
+				regen1: regen1 {
+					/* VDD_3V3_ON */
+					regulator-name = "regen1";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+
+				regen2: regen2 {
+					/* Needed for PMIC internal resource */
+					regulator-name = "regen2";
+					regulator-boot-on;
+					regulator-always-on;
+				};
+			};
+		};
+
+		tps659038_rtc: tps659038_rtc {
+			compatible = "ti,palmas-rtc";
+			interrupt-parent = <&tps659038>;
+			interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+		};
+
+		tps659038_pwr_button: tps659038_pwr_button {
+			compatible = "ti,palmas-pwrbutton";
+			interrupt-parent = <&tps659038>;
+			interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+			wakeup-source;
+			ti,palmas-long-press-seconds = <12>;
+		};
+
+		tps659038_gpio: tps659038_gpio {
+			compatible = "ti,palmas-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+	};
+
+	/* STMPE811 touch screen controller */
+	stmpe811@41 {
+		compatible = "st,stmpe811";
+		reg = <0x41>;
+		interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio2>;
+		interrupt-controller;
+		id = <0>;
+		blocks = <0x5>;
+		irq-trigger = <0x1>;
+		st,mod-12b = <1>; /* 12-bit ADC */
+		st,ref-sel = <0>; /* internal ADC reference */
+		st,adc-freq = <1>; /* 3.25 MHz ADC clock speed */
+		st,sample-time = <4>; /* ADC converstion time: 80 clocks */
+
+		stmpe_adc {
+			compatible = "st,stmpe-adc";
+			st,norequest-mask = <0x00>; /* mask any channels to be used by touchscreen */
+			adc0: iio-device@0 {
+				#io-channel-cells = <1>;
+				iio-channels = <&adc0 4>, <&adc0 1>, <&adc0 2>, <&adc0 3>, <&adc0 4>, <&adc0 5>, <&adc0 6>;
+				iio-channel-names = "AIN0_P9_39", "AIN1_P9_40", "AIN2_P9_37", "AIN3_P9_38",
+					"AIN4_P9_33", "AIN5_P9_36", "AIN6_P9_35";
+			};
+		};
+
+		stmpe_touchscreen {
+			status = "disabled";
+			compatible = "st,stmpe-ts";
+			/* 8 sample average control */
+			st,ave-ctrl = <3>;
+			/* 7 length fractional part in z */
+			st,fraction-z = <7>;
+			/*
+			 * 50 mA typical 80 mA max touchscreen drivers
+			 * current limit value
+			 */
+			st,i-drive = <1>;
+			/* 1 ms panel driver settling time */
+			st,settling = <3>;
+			/* 5 ms touch detect interrupt delay */
+			st,touch-det-delay = <5>;
+		};
+
+		stmpe_gpio {
+			compatible = "st,stmpe-gpio";
+		};
+
+		stmpe_pwm {
+			compatible = "st,stmpe-pwm";
+			#pwm-cells = <2>;
+		};
+	};
+};
+
+&mcspi3 {
+	status = "okay";
+	ti,pindir-d0-out-d1-in;
+
+	sn65hvs882: sn65hvs882@0 {
+		compatible = "pisosr-gpio";
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		spi-cpol;
+	};
+};
+
+&cpu0 {
+	vdd-supply = <&vdd_mpu>;
+	voltage-tolerance = <1>;
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&davinci_mdio {
+	reset-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+	reset-delay-us = <2>;
+
+	phy0: ethernet-phy@1 {
+		reg = <4>;
+		eee-broken-100tx;
+		eee-broken-1000t;
+	};
+};
+
+&mac {
+	slaves = <1>;
+	status = "okay";
+};
+
+&cpsw_emac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii";
+};
+
+&ocp {
+	pruss1_shmem: pruss_shmem@4b200000 {
+		status = "okay";
+		compatible = "ti,pruss-shmem";
+		reg = <0x4b200000 0x020000>;
+	};
+
+	pruss2_shmem: pruss_shmem@4b280000 {
+		status = "okay";
+		compatible = "ti,pruss-shmem";
+		reg = <0x4b280000 0x020000>;
+	};
+};
+
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&vdd_3v3>;
+	vqmmc-supply = <&vdd_sd>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
+};
+
+&mmc2 {
+	status = "okay";
+	vmmc-supply = <&vdd_1v8>;
+	vqmmc-supply = <&vdd_1v8>;
+	bus-width = <8>;
+	ti,non-removable;
+	non-removable;
+	mmc-pwrseq = <&emmc_pwrseq>;
+
+	ti,needs-special-reset;
+	dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
+	dma-names = "tx", "rx";
+
+};
+
+&mmc4 {
+	/* DS: Default speed (DS) up to 25 MHz, including 1- and 4-bit modes (3.3 V signaling). */
+	/* HS: High speed up to 50 MHz (3.3 V signaling). */
+	/* SDR12: SDR up to 25 MHz (1.8 V signaling). */
+	/* SDR25: SDR up to 50 MHz (1.8 V signaling). */
+	/* SDR50: SDR up to 100 MHz (1.8 V signaling). */
+	/* SDR104: SDR up to 208 MHz (1.8 V signaling) */
+	/* DDR50: DDR up to 50 MHz (1.8 V signaling). */
+	status = "okay";
+
+	ti,needs-special-reset;
+	vmmc-supply = <&vdd_3v3>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	bus-width = <4>;
+	ti,non-removable;
+	non-removable;
+	no-1-8-v;
+	max-frequency = <24000000>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmc-pwrseq = <&brcmf_pwrseq>;
+
+	brcmf: wifi@1 {
+		status = "okay";
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+
+		brcm,sd-head-align = <4>;
+		brcm,sd_head_align = <4>;
+		brcm,sd_sgentry_align = <512>;
+
+		interrupt-parent = <&gpio3>;
+		interrupts = <23 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&usb2_phy1 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+	phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+	status = "okay";
+	dr_mode = "otg";
+};
+
+&omap_dwc3_1 {
+	extcon = <&extcon_usb1>;
+};
+
+&usb2 {
+	status = "okay";
+	dr_mode = "host";
+};
+
+&dss {
+	status = "okay";
+	vdda_video-supply = <&vdd_1v8_pll>;
+};
+
+&hdmi {
+	status = "okay";
+	vdda-supply = <&vdd_1v8_phy_ldo4>;
+
+	port {
+		hdmi_out: endpoint {
+			remote-endpoint = <&hdmi_encoder_in>;
+		};
+	};
+};
+
+&bandgap {
+	status = "okay";
+};
+
+&mailbox1 {
+	status = "okay";
+};
+
+&mailbox2 {
+	status = "okay";
+};
+
+&mailbox3 {
+	status = "okay";
+};
+
+&mailbox4 {
+	status = "okay";
+};
+
+&mailbox5 {
+	status = "okay";
+};
+
+&mailbox6 {
+	status = "okay";
+};
+
+&mailbox7 {
+	status = "okay";
+};
+
+&mailbox8 {
+	status = "okay";
+};
+
+&mailbox9 {
+	status = "okay";
+};
+
+&mailbox10 {
+	status = "okay";
+};
+
+&mailbox11 {
+	status = "okay";
+};
+
+&mailbox12 {
+	status = "okay";
+};
+
+&mailbox13 {
+	status = "okay";
+};
+
+&cpu_alert0 {
+	temperature = <55000>; /* milliCelsius */
+};
+
+&cpu_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&gpu_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&core_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&dspeve_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&iva_crit {
+	temperature = <85000>; /* milliCelsius */
+};
+
+&sata {
+	status = "disabled";
+};
+
+&sata_phy {
+	status = "disabled";
+};
+
+/* bluetooth */
+&uart6 {
+	status = "okay";
+};
+
+/* cape header stuff */
+&i2c4 {
+	status = "okay";
+	clock-frequency = <100000>;
+};
+
+&cpu0_opp_table {
+	opp_slow-500000000 {
+		opp-shared;
+	};
+};
diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index ddf123620e96..37ce2d7c4173 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -6,6 +6,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include "am57xx-idk-common.dtsi"
+#include "dra74-ipu-dsp-common.dtsi"
 
 / {
 	memory@0 {
@@ -13,6 +14,40 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
 	status-leds {
 		compatible = "gpio-leds";
 		cpu0-led {
@@ -147,22 +182,22 @@
 	gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
 };
 
-&mailbox5 {
+&ipu2 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
+	memory-region = <&ipu2_memory_region>;
 };
 
-&mailbox6 {
+&ipu1 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		status = "okay";
-	};
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_memory_region>;
 };
diff --git a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
index 565675354de4..94135fc5dd44 100644
--- a/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-beagle-x15-common.dtsi
@@ -7,6 +7,7 @@
 #include "am5728.dtsi"
 #include "am57xx-commercial-grade.dtsi"
 #include "dra74x-mmc-iodelay.dtsi"
+#include "dra74-ipu-dsp-common.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 
@@ -50,6 +51,40 @@
 		regulator-boot-on;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
 	vdd_3v3: fixedregulator-vdd_3v3 {
 		compatible = "regulator-fixed";
 		regulator-name = "vdd_3v3";
@@ -584,22 +619,22 @@
 	rx-num-evt = <32>;
 };
 
-&mailbox5 {
+&ipu2 {
 	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
+	memory-region = <&ipu2_memory_region>;
 };
 
-&mailbox6 {
+&ipu1 {
 	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
-		status = "okay";
-	};
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_memory_region>;
 };
diff --git a/arch/arm/boot/dts/am57xx-idk-common.dtsi b/arch/arm/boot/dts/am57xx-idk-common.dtsi
index a3ff1237d1fa..2c0aab352b44 100644
--- a/arch/arm/boot/dts/am57xx-idk-common.dtsi
+++ b/arch/arm/boot/dts/am57xx-idk-common.dtsi
@@ -35,6 +35,16 @@
 		regulator-boot-on;
 	};
 
+	v1_2d: fixedregulator-v1_2d {
+		compatible = "regulator-fixed";
+		regulator-name = "V1_2D";
+		vin-supply = <&vmain>;
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vtt_fixed: fixedregulator-vtt {
 		/* TPS51200 */
 		compatible = "regulator-fixed";
@@ -139,6 +149,12 @@
 			};
 		};
 	};
+
+	src_clk_x1: src_clk_x1 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <20000000>;
+	};
 };
 
 &dra7_pmx_core {
@@ -378,6 +394,32 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	dsi_bridge: tc358778@e {
+		compatible = "toshiba,tc358778", "toshiba,tc358768";
+		reg = <0xe>;
+		status = "disabled";
+
+		clocks = <&src_clk_x1>;
+		clock-names = "refclk";
+
+		vddc-supply = <&v1_2d>;
+		vddmipi-supply = <&v1_2d>;
+		vddio-supply = <&v3_3d>;
+
+		dsi_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				rgb_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+					data-lines = <24>;
+				};
+			};
+		};
+	};
 };
 
 &mcspi3 {
@@ -543,4 +585,20 @@
 
 &dss {
 	status = "okay";
+
+	vdda_video-supply = <&ldoln_reg>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			dpi_out: endpoint {
+				remote-endpoint = <&rgb_in>;
+				data-lines = <24>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi
index c15f5e92f97f..0b8c2a64b36f 100644
--- a/arch/arm/boot/dts/armada-370-xp.dtsi
+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
@@ -114,7 +114,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <31>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -124,7 +123,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <32>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi
index 2932a29ae272..9805e507c695 100644
--- a/arch/arm/boot/dts/armada-375.dtsi
+++ b/arch/arm/boot/dts/armada-375.dtsi
@@ -236,7 +236,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -247,7 +246,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index e038abc0c6b4..348116501aa2 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -153,7 +153,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -164,7 +163,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/armada-39x.dtsi b/arch/arm/boot/dts/armada-39x.dtsi
index b1b86934c688..e0b7c2099831 100644
--- a/arch/arm/boot/dts/armada-39x.dtsi
+++ b/arch/arm/boot/dts/armada-39x.dtsi
@@ -108,7 +108,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -119,7 +118,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -130,7 +128,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
@@ -141,7 +138,6 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
 				clocks = <&coreclk 0>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/aspeed-ast2600-evb.dts b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
index 4afa8662c4e8..8d0f4656aa05 100644
--- a/arch/arm/boot/dts/aspeed-ast2600-evb.dts
+++ b/arch/arm/boot/dts/aspeed-ast2600-evb.dts
@@ -213,3 +213,7 @@
 &i2c15 {
 	status = "okay";
 };
+
+&fsim0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
index 5d7cbd9164d4..2d44d9ad4e40 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
@@ -5,6 +5,7 @@
 
 #include "aspeed-g5.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
 
 / {
 	model = "Facebook TiogaPass BMC";
@@ -112,13 +113,76 @@
 &kcs2 {
 	// BMC KCS channel 2
 	status = "okay";
-	kcs_addr = <0xca8>;
+	aspeed,lpc-io-reg = <0xca8>;
 };
 
 &kcs3 {
 	// BMC KCS channel 3
 	status = "okay";
-	kcs_addr = <0xca2>;
+	aspeed,lpc-io-reg = <0xca2>;
+};
+
+&gpio {
+	status = "okay";
+	gpio-line-names =
+	/*A0-A7*/	"BMC_CPLD_FPGA_SEL","","","","","","","",
+	/*B0-B7*/	"","BMC_DEBUG_EN","","","","BMC_PPIN","PS_PWROK",
+			"IRQ_PVDDQ_GHJ_VRHOT_LVT3",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"BIOS_MRC_DEBUG_MSG_DIS","BOARD_REV_ID0","",
+			"BOARD_REV_ID1","IRQ_DIMM_SAVE_LVT3","BOARD_REV_ID2",
+			"CPU_ERR0_LVT3_BMC","CPU_ERR1_LVT3_BMC",
+	/*E0-E7*/	"RESET_BUTTON","RESET_OUT","POWER_BUTTON",
+			"POWER_OUT","NMI_BUTTON","","CPU0_PROCHOT_LVT3_ BMC",
+			"CPU1_PROCHOT_LVT3_ BMC",
+	/*F0-F7*/	"IRQ_PVDDQ_ABC_VRHOT_LVT3","",
+			"IRQ_PVCCIN_CPU0_VRHOT_LVC3",
+			"IRQ_PVCCIN_CPU1_VRHOT_LVC3",
+			"IRQ_PVDDQ_KLM_VRHOT_LVT3","","P3VBAT_BRIDGE_EN","",
+	/*G0-G7*/	"CPU_ERR2_LVT3","CPU_CATERR_LVT3","PCH_BMC_THERMTRIP",
+			"CPU0_SKTOCC_LVT3","","","","BIOS_SMI_ACTIVE",
+	/*H0-H7*/	"LED_POST_CODE_0","LED_POST_CODE_1","LED_POST_CODE_2",
+			"LED_POST_CODE_3","LED_POST_CODE_4","LED_POST_CODE_5",
+			"LED_POST_CODE_6","LED_POST_CODE_7",
+	/*I0-I7*/	"CPU0_FIVR_FAULT_LVT3","CPU1_FIVR_FAULT_LVT3",
+			"FORCE_ADR","UV_ADR_TRIGGER_EN","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"IRQ_UV_DETECT","IRQ_OC_DETECT","HSC_TIMER_EXP","",
+			"MEM_THERM_EVENT_PCH","PMBUS_ALERT_BUF_EN","","",
+	/*M0-M7*/	"CPU0_RC_ERROR","CPU1_RC_ERROR","","OC_DETECT_EN",
+			"CPU0_THERMTRIP_LATCH_LVT3",
+			"CPU1_THERMTRIP_LATCH_LVT3","","",
+	/*N0-N7*/	"","","","CPU_MSMI_LVT3","","BIOS_SPI_BMC_CTRL","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"BOARD_SKU_ID0","BOARD_SKU_ID1","BOARD_SKU_ID2",
+			"BOARD_SKU_ID3","BOARD_SKU_ID4","BMC_PREQ",
+			"BMC_PWR_DEBUG","RST_RSMRST",
+	/*Q0-Q7*/	"","","","","UARTSW_LSB","UARTSW_MSB",
+			"POST_CARD_PRES_BMC","PE_BMC_WAKE",
+	/*R0-R7*/	"","","BMC_TCK_MUX_SEL","BMC_PRDY",
+			"BMC_XDP_PRSNT_IN","RST_BMC_PLTRST_BUF","SLT_CFG0",
+			"SLT_CFG1",
+	/*S0-S7*/	"THROTTLE","BMC_READY","","HSC_SMBUS_SWITCH_EN","",
+			"","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","BMC_FAULT","","",
+	/*V0-V7*/	"","","","FAST_PROCHOT_EN","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","GLOBAL_RST_WARN",
+			"CPU0_MEMABC_MEMHOT_LVT3_BMC",
+			"CPU0_MEMDEF_MEMHOT_LVT3_BMC",
+			"CPU1_MEMGHJ_MEMHOT_LVT3_BMC",
+			"CPU1_MEMKLM_MEMHOT_LVT3_BMC",
+	/*Y0-Y7*/	"SIO_S3","SIO_S5","BMC_JTAG_SEL","SIO_ONCONTROL","",
+			"","","",
+	/*Z0-Z7*/	"","SIO_POWER_GOOD","IRQ_PVDDQ_DEF_VRHOT_LVT3","",
+			"","","","",
+	/*AA0-AA7*/	"CPU1_SKTOCC_LVT3","IRQ_SML1_PMBUS_ALERT",
+			"SERVER_POWER_LED","","PECI_MUX_SELECT","UV_HIGH_SET",
+			"","POST_COMPLETE",
+	/*AB0-AB7*/	"IRQ_HSC_FAULT","OCP_MEZZA_PRES","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
 };
 
 &mac0 {
@@ -368,6 +432,11 @@
 &i2c4 {
 	status = "okay";
 	// BMC Debug Header
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
 };
 
 &i2c5 {
@@ -449,6 +518,11 @@
 &i2c9 {
 	status = "okay";
 	//USB Debug Connector
+	ipmb0@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
 };
 
 &pwm_tacho {
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
new file mode 100644
index 000000000000..8864e9c312a8
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-yosemitev2.dts
@@ -0,0 +1,231 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+// Copyright (c) 2018 Facebook Inc.
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Yosemitev2 BMC";
+	compatible = "facebook,yosemitev2-bmc", "aspeed,ast2500";
+	aliases {
+		serial4 = &uart5;
+	};
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	iio-hwmon {
+		// VOLATAGE SENSOR
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0> , <&adc 1> , <&adc 2> ,  <&adc 3> ,
+		<&adc 4> , <&adc 5> , <&adc 6> ,  <&adc 7> ,
+		<&adc 8> , <&adc 9> , <&adc 10>, <&adc 11> ,
+		<&adc 12> , <&adc 13> , <&adc 14> , <&adc 15> ;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+	};
+};
+&uart1 {
+	// Host1 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+		     &pinctrl_rxd1_default>;
+};
+
+&uart2 {
+	// Host2 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+
+};
+
+&uart3 {
+	// Host3 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd3_default
+		     &pinctrl_rxd3_default>;
+};
+
+&uart4 {
+	// Host4 Console
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+&uart5 {
+	// BMC Console
+	status = "okay";
+};
+
+&vuart {
+	// Virtual UART
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	use-ncsi;
+	mlx,multi-host;
+};
+
+&adc {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&i2c1 {
+	//Host1 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb1@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c3 {
+	//Host2 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb3@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c5 {
+	//Host3 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb5@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c7 {
+	//Host4 IPMB bus
+	status = "okay";
+	multi-master;
+	ipmb7@10 {
+		compatible = "ipmb-dev";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+		i2c-protocol;
+	};
+};
+
+&i2c8 {
+	status = "okay";
+	//FRU EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&i2c9 {
+	status = "okay";
+	tmp421@4e {
+	//INLET TEMP
+		compatible = "ti,tmp421";
+		reg = <0x4e>;
+	};
+	//OUTLET TEMP
+	tmp421@4f {
+		compatible = "ti,tmp421";
+		reg = <0x4f>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	//HSC
+	adm1278@40 {
+		compatible = "adi,adm1278";
+		reg = <0x40>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+	//MEZZ_TEMP_SENSOR
+	tmp421@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	//MEZZ_FRU
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+		pagesize = <32>;
+	};
+};
+
+&pwm_tacho {
+	status = "okay";
+	//FSC
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
+	fan@0 {
+		reg = <0x00>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x00>;
+	};
+	fan@1 {
+		reg = <0x01>;
+		aspeed,fan-tach-ch = /bits/ 8 <0x01>;
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
index 6232cd726a7f..bdfe342bf7c5 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts
@@ -4,6 +4,7 @@
 
 #include "aspeed-g6.dtsi"
 #include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/leds/leds-pca955x.h>
 
 / {
 	model = "Rainier";
@@ -32,6 +33,11 @@
 			no-map;
 			reg = <0xB8000000 0x04000000>; /* 64M */
 		};
+
+		vga_memory: region@bf000000 {
+                        no-map;
+                        reg = <0xbf000000 0x01000000>;  /* 16M */
+                };
 	};
 
 	gpio-keys {
@@ -64,6 +70,40 @@
 
 };
 
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"cfam-reset","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"presence-ps0","presence-ps1","presence-ps2","presence-ps3",
+				"","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
 &emmc_controller {
 	status = "okay";
 };
@@ -72,6 +112,88 @@
 	status = "okay";
 };
 
+&fsim0 {
+	status = "okay";
+
+	#address-cells = <2>;
+	#size-cells = <0>;
+
+	cfam@0,0 {
+		reg = <0 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <0>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ0: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub0: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+&fsi_hub0 {
+	cfam@1,0 {
+		reg = <1 0>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		chip-id = <1>;
+
+		scom@1000 {
+			compatible = "ibm,fsi2pib";
+			reg = <0x1000 0x400>;
+		};
+
+		sbefifo@2400 {
+			compatible = "ibm,p9-sbefifo";
+			reg = <0x2400 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			fsi_occ1: occ {
+				compatible = "ibm,p9-occ";
+			};
+		};
+
+		fsi_hub1: hub@3400 {
+			compatible = "fsi-master-hub";
+			reg = <0x3400 0x400>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+
+			no-scan-on-init;
+		};
+	};
+};
+
+/* Legacy OCC numbering (to get rid of when userspace is fixed) */
+&fsi_occ0 {
+	reg = <1>;
+};
+
+&fsi_occ1 {
+	reg = <2>;
+};
+
 &ibt {
 	status = "okay";
 };
@@ -269,66 +391,82 @@
 
 		gpio@0 {
 			reg = <0>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@1 {
 			reg = <1>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@2 {
 			reg = <2>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@3 {
 			reg = <3>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@4 {
 			reg = <4>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@5 {
 			reg = <5>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@6 {
 			reg = <6>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@7 {
 			reg = <7>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@8 {
 			reg = <8>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@9 {
 			reg = <9>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@10 {
 			reg = <10>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@11 {
 			reg = <11>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@12 {
 			reg = <12>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@13 {
 			reg = <13>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@14 {
 			reg = <14>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 
 		gpio@15 {
 			reg = <15>;
+			type = <PCA955X_TYPE_GPIO>;
 		};
 	};
 
@@ -386,21 +524,6 @@
 &i2c9 {
 	status = "okay";
 
-	ir35221@42 {
-		compatible = "infineon,ir35221";
-		reg = <0x42>;
-	};
-
-	ir35221@43 {
-		compatible = "infineon,ir35221";
-		reg = <0x43>;
-	};
-
-	ir35221@44 {
-		compatible = "infineon,ir35221";
-		reg = <0x44>;
-	};
-
 	tmp423a@4c {
 		compatible = "ti,tmp423";
 		reg = <0x4c>;
@@ -411,21 +534,6 @@
 		reg = <0x4d>;
 	};
 
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	ir35221@73 {
-		compatible = "infineon,ir35221";
-		reg = <0x73>;
-	};
-
-	ir35221@74 {
-		compatible = "infineon,ir35221";
-		reg = <0x74>;
-	};
-
 	eeprom@50 {
 		compatible = "atmel,24c128";
 		reg = <0x50>;
@@ -435,21 +543,6 @@
 &i2c10 {
 	status = "okay";
 
-	ir35221@42 {
-		compatible = "infineon,ir35221";
-		reg = <0x42>;
-	};
-
-	ir35221@43 {
-		compatible = "infineon,ir35221";
-		reg = <0x43>;
-	};
-
-	ir35221@44 {
-		compatible = "infineon,ir35221";
-		reg = <0x44>;
-	};
-
 	tmp423a@4c {
 		compatible = "ti,tmp423";
 		reg = <0x4c>;
@@ -460,21 +553,6 @@
 		reg = <0x4d>;
 	};
 
-	ir35221@72 {
-		compatible = "infineon,ir35221";
-		reg = <0x72>;
-	};
-
-	ir35221@73 {
-		compatible = "infineon,ir35221";
-		reg = <0x73>;
-	};
-
-	ir35221@74 {
-		compatible = "infineon,ir35221";
-		reg = <0x74>;
-	};
-
 	eeprom@50 {
 		compatible = "atmel,24c128";
 		reg = <0x50>;
@@ -540,6 +618,10 @@
 	status = "okay";
 };
 
+&vuart2 {
+	status = "okay";
+};
+
 &lpc_ctrl {
 	status = "okay";
 	memory-region = <&flash_memory>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
index f7e935ede919..60e545b6396f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-mihawk.dts
@@ -8,6 +8,52 @@
 	model = "Mihawk BMC";
 	compatible = "ibm,mihawk-bmc", "aspeed,ast2500";
 
+	aliases {
+		i2c215 = &bus6_mux215;
+		i2c216 = &bus6_mux216;
+		i2c217 = &bus6_mux217;
+		i2c218 = &bus6_mux218;
+		i2c219 = &bus6_mux219;
+		i2c220 = &bus6_mux220;
+		i2c221 = &bus6_mux221;
+		i2c222 = &bus6_mux222;
+		i2c223 = &bus7_mux223;
+		i2c224 = &bus7_mux224;
+		i2c225 = &bus7_mux225;
+		i2c226 = &bus7_mux226;
+		i2c227 = &bus7_mux227;
+		i2c228 = &bus7_mux228;
+		i2c229 = &bus7_mux229;
+		i2c230 = &bus7_mux230;
+		i2c231 = &bus9_mux231;
+		i2c232 = &bus9_mux232;
+		i2c233 = &bus9_mux233;
+		i2c234 = &bus9_mux234;
+		i2c235 = &bus9_mux235;
+		i2c236 = &bus9_mux236;
+		i2c237 = &bus9_mux237;
+		i2c238 = &bus9_mux238;
+		i2c239 = &bus10_mux239;
+		i2c240 = &bus10_mux240;
+		i2c241 = &bus10_mux241;
+		i2c242 = &bus10_mux242;
+		i2c243 = &bus10_mux243;
+		i2c244 = &bus10_mux244;
+		i2c245 = &bus10_mux245;
+		i2c246 = &bus10_mux246;
+		i2c247 = &bus12_mux247;
+		i2c248 = &bus12_mux248;
+		i2c249 = &bus12_mux249;
+		i2c250 = &bus12_mux250;
+		i2c251 = &bus13_mux251;
+		i2c252 = &bus13_mux252;
+		i2c253 = &bus13_mux253;
+		i2c254 = &bus13_mux254;
+		i2c255 = &bus13_mux255;
+		i2c256 = &bus13_mux256;
+		i2c257 = &bus13_mux257;
+		i2c258 = &bus13_mux258;
+	};
 
 	chosen {
 		stdout-path = &uart5;
@@ -120,35 +166,24 @@
 	leds {
 		compatible = "gpio-leds";
 
-		fault {
+		front-fault {
 			retain-state-shutdown;
 			default-state = "keep";
 			gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_LOW>;
 		};
 
-		power {
+		power-button {
 			retain-state-shutdown;
 			default-state = "keep";
 			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_LOW>;
 		};
 
-		rear-id {
+		front-id {
 			retain-state-shutdown;
 			default-state = "keep";
 			gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_LOW>;
 		};
 
-		rear-g {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_LOW>;
-		};
-
-		rear-ok {
-			retain-state-shutdown;
-			default-state = "keep";
-			gpios = <&gpio ASPEED_GPIO(Y, 0) GPIO_ACTIVE_LOW>;
-		};
 
 		fan0 {
 			retain-state-shutdown;
@@ -630,6 +665,54 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
+
+		bus7_mux223: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus7_mux224: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus7_mux225: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus7_mux226: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		bus7_mux227: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		bus7_mux228: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		bus7_mux229: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		bus7_mux230: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
 	};
 
 };
@@ -644,6 +727,54 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
+
+		bus6_mux215: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus6_mux216: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus6_mux217: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus6_mux218: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		bus6_mux219: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		bus6_mux220: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		bus6_mux221: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		bus6_mux222: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
 	};
 
 };
@@ -684,6 +815,30 @@
 		i2c-mux-idle-disconnect;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+
+		bus9_mux231: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus9_mux232: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus9_mux233: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus9_mux234: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
 	};
 
 	pca9545@71 {
@@ -695,6 +850,30 @@
 		i2c-mux-idle-disconnect;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+
+		bus9_mux235: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus9_mux236: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus9_mux237: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus9_mux238: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
 	};
 };
 
@@ -725,6 +904,30 @@
 		i2c-mux-idle-disconnect;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+
+		bus10_mux239: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus10_mux240: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus10_mux241: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus10_mux242: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
 	};
 
 	pca9545@71 {
@@ -736,6 +939,30 @@
 		i2c-mux-idle-disconnect;
 		interrupt-controller;
 		#interrupt-cells = <2>;
+
+		bus10_mux243: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus10_mux244: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus10_mux245: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus10_mux246: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
 	};
 };
 
@@ -796,7 +1023,7 @@
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		i2c@0 {
+		bus12_mux247: i2c@0 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
@@ -807,7 +1034,7 @@
 			};
 		};
 
-		i2c@1 {
+		bus12_mux248: i2c@1 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <1>;
@@ -818,7 +1045,7 @@
 			};
 		};
 
-		i2c@2 {
+		bus12_mux249: i2c@2 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <2>;
@@ -829,7 +1056,7 @@
 			};
 		};
 
-		i2c@3 {
+		bus12_mux250: i2c@3 {
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <3>;
@@ -857,6 +1084,53 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 		reg = <0x70>;
+		bus13_mux251: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		bus13_mux252: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		bus13_mux253: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		bus13_mux254: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		bus13_mux255: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		bus13_mux256: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		bus13_mux257: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		bus13_mux258: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
new file mode 100644
index 000000000000..91dced7e7849
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-nicole.dts
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright 2019 YADRO
+/dts-v1/;
+#include "aspeed-g5.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+
+/ {
+	model = "Nicole BMC";
+	compatible = "yadro,nicole-bmc", "aspeed,ast2500";
+
+	chosen {
+		stdout-path = &uart5;
+		bootargs = "console=ttyS4,115200 earlyprintk";
+	};
+
+	memory@80000000 {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		vga_memory: framebuffer@9f000000 {
+			no-map;
+			reg = <0x9f000000 0x01000000>; /* 16M */
+		};
+
+		flash_memory: region@98000000 {
+			no-map;
+			reg = <0x98000000 0x04000000>; /* 64M */
+		};
+
+		coldfire_memory: codefire_memory@9ef00000 {
+			reg = <0x9ef00000 0x00100000>;
+			no-map;
+		};
+
+		gfx_memory: framebuffer {
+			size = <0x01000000>;
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+
+		video_engine_memory: jpegbuffer {
+			size = <0x02000000>;	/* 32M */
+			alignment = <0x01000000>;
+			compatible = "shared-dma-pool";
+			reusable;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		power {
+			label = "platform:green:power";
+			gpios = <&gpio ASPEED_GPIO(AA, 4) GPIO_ACTIVE_HIGH>;
+		};
+
+		identify {
+			label = "platform:blue:indicator";
+			gpios = <&gpio ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
+		};
+
+		fault {
+			label = "platform:red:fault";
+			gpios = <&gpio ASPEED_GPIO(AA, 3) GPIO_ACTIVE_HIGH>;
+		};
+
+		attention {
+			label = "platform:yellow:alarm";
+			gpios = <&gpio ASPEED_GPIO(AA, 1) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	fsi: gpio-fsi {
+		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		#address-cells = <2>;
+		#size-cells = <0>;
+		no-gpio-delays;
+
+		memory-region = <&coldfire_memory>;
+		aspeed,sram = <&sram>;
+		aspeed,cvic = <&cvic>;
+
+		clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
+		data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
+		mux-gpios = <&gpio ASPEED_GPIO(A, 6) GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
+		trans-gpios = <&gpio ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(J, 2)>;
+		};
+	};
+
+	iio-hwmon-battery {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 12>;
+	};
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout.dtsi"
+	};
+};
+
+&spi1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi1_default>;
+
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "pnor";
+		spi-max-frequency = <100000000>;
+	};
+};
+
+&lpc_ctrl {
+	status = "okay";
+	memory-region = <&flash_memory>;
+	flash = <&spi1>;
+};
+
+&uart1 {
+	/* Rear RS-232 connector */
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd1_default
+			&pinctrl_rxd1_default
+			&pinctrl_nrts1_default
+			&pinctrl_ndtr1_default
+			&pinctrl_ndsr1_default
+			&pinctrl_ncts1_default
+			&pinctrl_ndcd1_default
+			&pinctrl_nri1_default>;
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&mac0 {
+	status = "okay";
+
+	use-ncsi;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rmii1_default>;
+	clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>,
+		 <&syscon ASPEED_CLK_MAC1RCLK>;
+	clock-names = "MACCLK", "RCLK";
+};
+
+&i2c0 {
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	/* CPU0 characterization connector */
+};
+
+&i2c3 {
+	status = "okay";
+	/* CLK GEN SI5338 */
+};
+
+&i2c4 {
+	status = "okay";
+	/* Voltage regulators for CPU0 */
+};
+
+&i2c5 {
+	status = "okay";
+	/* Voltage regulators for CPU1 */
+};
+
+&i2c6 {
+	status = "okay";
+
+	rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+	/* CPLD */
+};
+
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","bmc_power_up","sys_pwrok_buf",
+			"func_mode0","func_mode1","func_mode2","","",
+	/*E0-E7*/	"","ncsi_cfg","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","power-button","","","","","",
+	/*P0-P7*/	"","fsi-trans","pm_rtc_adc_en","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","software_pwrgood","","","","","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","led-attention","fsi-data","led-fault",
+			"led-power","","","led-identify",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
+	func_mode0 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func_mode1 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	func_mode2 {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	seq_cont {
+		gpio-hog;
+		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
+		output-low;
+	};
+	ncsi_cfg {
+		gpio-hog;
+		input;
+		gpios = <ASPEED_GPIO(E, 1) GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&vuart {
+	status = "okay";
+};
+
+&gfx {
+	status = "okay";
+	memory-region = <&gfx_memory>;
+};
+
+&pinctrl {
+	aspeed,external-nodes = <&gfx &lhc>;
+};
+
+&ibt {
+	status = "okay";
+};
+
+&vhub {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default
+			&pinctrl_adc1_default
+			&pinctrl_adc2_default
+			&pinctrl_adc3_default
+			&pinctrl_adc4_default
+			&pinctrl_adc5_default
+			&pinctrl_adc6_default
+			&pinctrl_adc7_default
+			&pinctrl_adc8_default
+			&pinctrl_adc9_default
+			&pinctrl_adc10_default
+			&pinctrl_adc11_default
+			&pinctrl_adc12_default
+			&pinctrl_adc13_default
+			&pinctrl_adc14_default
+			&pinctrl_adc15_default>;
+};
+
+&video {
+	status = "okay";
+	memory-region = <&video_engine_memory>;
+};
+
+#include "ibm-power9-dual.dtsi"
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
index edfa44fe1f75..fd2e014dae75 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts
@@ -231,23 +231,52 @@
 };
 
 &gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","nic_func_mode0","nic_func_mode1","","","",
+	/*E0-E7*/	"","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","led-fault","",
+				"led-identify","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"","","","","","","","id-button",
+	/*R0-R7*/	"","","fsi-trans","","","led-power","","",
+	/*S0-S7*/	"","","","","","","","seq_cont",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","fsi-data","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
 	nic_func_mode0 {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 3) GPIO_ACTIVE_HIGH>;
 		output-low;
-		line-name = "nic_func_mode0";
 	};
 	nic_func_mode1 {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
 		output-low;
-		line-name = "nic_func_mode1";
 	};
 	seq_cont {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(S, 7) GPIO_ACTIVE_HIGH>;
 		output-low;
-		line-name = "seq_cont";
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index ff49ec76fa7c..13c4aa02f4de 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -34,6 +34,59 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
+		checkstop {
+			label = "checkstop";
+			gpios = <&gpio0 ASPEED_GPIO(E, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 3)>;
+		};
+
+		ps0-presence {
+			label = "ps0-presence";
+			gpios = <&gpio0 ASPEED_GPIO(H, 3) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(H, 3)>;
+		};
+
+		ps1-presence {
+			label = "ps1-presence";
+			gpios = <&gpio0 ASPEED_GPIO(E, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <ASPEED_GPIO(E, 5)>;
+		};
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		poll-interval = <1000>;
+
+		fan0-presence {
+			label = "fan0-presence";
+			gpios = <&pca0 4 GPIO_ACTIVE_LOW>;
+			linux,code = <4>;
+		};
+
+		fan1-presence {
+			label = "fan1-presence";
+			gpios = <&pca0 5 GPIO_ACTIVE_LOW>;
+			linux,code = <5>;
+		};
+
+		fan2-presence {
+			label = "fan2-presence";
+			gpios = <&pca0 6 GPIO_ACTIVE_LOW>;
+			linux,code = <6>;
+		};
+
+		fan3-presence {
+			label = "fan3-presence";
+			gpios = <&pca0 7 GPIO_ACTIVE_LOW>;
+			linux,code = <7>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
 		air-water {
 			label = "air-water";
 			gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
@@ -89,6 +142,49 @@
 			linux,code = <7>;
 		};
 	};
+
+	iio-hwmon-dps310 {
+		compatible = "iio-hwmon";
+		io-channels = <&dps 0>;
+	};
+
+	iio-hwmon-bmp280 {
+		compatible = "iio-hwmon";
+		io-channels = <&bmp 1>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"fsi-mux","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"","","","","","","","",
+	/*E0-E7*/	"power-button","","","checkstop","","presence-ps1","","led-rear-fault",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","presence-ps0","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"led-rear-power","led-rear-id","","","","","","",
+	/*P0-P7*/	"","","","","","","","",
+	/*Q0-Q7*/	"cfam-reset","","","","","","","fsi-routing",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
 };
 
 &fmc {
@@ -132,6 +228,10 @@
 	use-ncsi;
 };
 
+&emmc_controller {
+	status = "okay";
+};
+
 &emmc {
 	status = "okay";
 };
@@ -142,6 +242,9 @@
 	#address-cells = <2>;
 	#size-cells = <0>;
 
+	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
+	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
+
 	cfam@0,0 {
 		reg = <0 0>;
 		#address-cells = <1>;
@@ -394,6 +497,11 @@
 
 &i2c1 {
 	status = "okay";
+
+	tpm: tpm@2e {
+		compatible = "tcg,tpm-tis-i2c";
+		reg = <0x2e>;
+	};
 };
 
 &i2c2 {
@@ -774,6 +882,10 @@
 	status = "okay";
 };
 
+&vuart2 {
+	status = "okay";
+};
+
 &lpc_ctrl {
 	status = "okay";
 	memory-region = <&flash_memory>;
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
index 421aa600148b..a0f99e34ac8e 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts
@@ -191,6 +191,40 @@
 
 };
 
+&gpio {
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","fsi-mux","",
+	/*B0-B7*/	"","","","","","air-water","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","","","",
+	/*E0-E7*/	"fsi-data","","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","","","",
+	/*H0-H7*/	"","","","","","","","",
+	/*I0-I7*/	"","","","","","","","",
+	/*J0-J7*/	"","","checkstop","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"presence-ps1","","led-rear-fault","led-rear-power",
+		        "led-rear-id","","","",
+	/*O0-O7*/	"","","","","","","","",
+	/*P0-P7*/	"","","","","","","","presence-ps0",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","fsi-trans","","","power-button","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"fsi-clock","","","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+};
+
 &fmc {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
index bc60ec291681..4bcc82046362 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts
@@ -478,32 +478,61 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpioh_unbiased>;
 
+	gpio-line-names =
+	/*A0-A7*/	"","cfam-reset","","","","","","",
+	/*B0-B7*/	"","","","","","","","",
+	/*C0-C7*/	"","","","","","","","",
+	/*D0-D7*/	"fsi-enable","","","","","led-sys-boot-status","led-attention",
+				"led-fault",
+	/*E0-E7*/	"","","","","","","","presence-pcie-e2b",
+	/*F0-F7*/	"","","","","","","","checkstop",
+	/*G0-G7*/	"fsi-clock","fsi-data","","","","","","",
+	/*H0-H7*/	"onewire0","onewire1","onewire2","onewire3","","","","",
+	/*I0-I7*/	"","","","power-button","","","","",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"","","","","","","","",
+	/*N0-N7*/	"","","","","","","","",
+	/*O0-O7*/	"","","","","iso_u164_en","","fsi-trans","",
+	/*P0-P7*/	"ncsi_mux_en_n","bmc_i2c2_sw_rst_n","","bmc_i2c5_sw_rst_n","",
+				"","fsi-mux","",
+	/*Q0-Q7*/	"","","","","","","","",
+	/*R0-R7*/	"","","","","","","","",
+	/*S0-S7*/	"","","","","","","","",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"","","","","","","","",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","","","","","","","",
+	/*Z0-Z7*/	"","","","","","","","",
+	/*AA0-AA7*/	"","","led-hdd-fault","","","","","",
+	/*AB0-AB7*/	"","","","","","","","",
+	/*AC0-AC7*/	"","","","","","","","";
+
 	line_iso_u146_en {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(O, 4) GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "iso_u164_en";
 	};
 
 	ncsi_mux_en_n {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 0) GPIO_ACTIVE_HIGH>;
 		output-low;
-		line-name = "ncsi_mux_en_n";
 	};
 
 	line_bmc_i2c2_sw_rst_n {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 1) GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "bmc_i2c2_sw_rst_n";
 	};
 
 	line_bmc_i2c5_sw_rst_n {
 		gpio-hog;
 		gpios = <ASPEED_GPIO(P, 3) GPIO_ACTIVE_HIGH>;
 		output-high;
-		line-name = "bmc_i2c5_sw_rst_n";
 	};
 };
 
diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi
index 8e04303e8514..82f0213e3a3c 100644
--- a/arch/arm/boot/dts/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed-g4.dtsi
@@ -219,6 +219,16 @@
 				reg = <0x1e720000 0x8000>;	// 32K
 			};
 
+			video: video@1e700000 {
+				compatible = "aspeed,ast2400-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <7>;
+				status = "disabled";
+			};
+
 			sdmmc: sd-controller@1e740000 {
 				compatible = "aspeed,ast2400-sd-controller";
 				reg = <0x1e740000 0x100>;
diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi
index f12ec04d3cbc..de7fd80b022a 100644
--- a/arch/arm/boot/dts/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed-g5.dtsi
@@ -224,6 +224,14 @@
 				#clock-cells = <1>;
 				#reset-cells = <1>;
 
+				scu_ic: interrupt-controller@18 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2500-scu-ic";
+					reg = <0x18 0x4>;
+					interrupts = <21>;
+					interrupt-controller;
+				};
+
 				p2a: p2a-control@2c {
 					compatible = "aspeed,ast2500-p2a-ctrl";
 					reg = <0x2c 0x4>;
@@ -254,6 +262,17 @@
 				interrupts = <0x19>;
 			};
 
+			xdma: xdma@1e6e7000 {
+				compatible = "aspeed,ast2500-xdma";
+				reg = <0x1e6e7000 0x100>;
+				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+				resets = <&syscon ASPEED_RESET_XDMA>;
+				interrupts-extended = <&vic 6>, <&scu_ic 2>;
+				pcie-device = "bmc";
+				aspeed,scu = <&syscon>;
+				status = "disabled";
+			};
+
 			adc: adc@1e6e9000 {
 				compatible = "aspeed,ast2500-adc";
 				reg = <0x1e6e9000 0xb0>;
@@ -426,22 +445,22 @@
 					#size-cells = <1>;
 					ranges = <0x0 0x0 0x80>;
 
-					kcs1: kcs1@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
+					kcs1: kcs@24 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
 						interrupts = <8>;
-						kcs_chan = <1>;
 						status = "disabled";
 					};
-					kcs2: kcs2@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
+					kcs2: kcs@28 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
 						interrupts = <8>;
-						kcs_chan = <2>;
 						status = "disabled";
 					};
-					kcs3: kcs3@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
+					kcs3: kcs@2c {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
 						interrupts = <8>;
-						kcs_chan = <3>;
 						status = "disabled";
 					};
 				};
@@ -455,10 +474,10 @@
 					#size-cells = <1>;
 					ranges = <0x0 0x80 0x1e0>;
 
-					kcs4: kcs4@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
+					kcs4: kcs@94 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
 						interrupts = <8>;
-						kcs_chan = <4>;
 						status = "disabled";
 					};
 
diff --git a/arch/arm/boot/dts/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed-g6.dtsi
index 0a29b3b57a9d..9d8d8e18bc90 100644
--- a/arch/arm/boot/dts/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed-g6.dtsi
@@ -65,6 +65,7 @@
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		clocks = <&syscon ASPEED_CLK_HPLL>;
 		arm,cpu-registers-not-fw-configured;
+		always-on;
 	};
 
 	ahb {
@@ -313,6 +314,22 @@
 					compatible = "aspeed,ast2600-smpmem";
 					reg = <0x180 0x40>;
 				};
+
+				scu_ic0: interrupt-controller@560 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic0";
+					reg = <0x560 0x4>;
+					interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
+
+				scu_ic1: interrupt-controller@570 {
+					#interrupt-cells = <1>;
+					compatible = "aspeed,ast2600-scu-ic1";
+					reg = <0x570 0x4>;
+					interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
+					interrupt-controller;
+				};
 			};
 
 			rng: hwrng@1e6e2524 {
@@ -322,6 +339,29 @@
 				quality = <100>;
 			};
 
+			xdma: xdma@1e6e7000 {
+				compatible = "aspeed,ast2600-xdma";
+				reg = <0x1e6e7000 0x100>;
+				clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+				resets = <&syscon ASPEED_RESET_DEV_XDMA>, <&syscon ASPEED_RESET_RC_XDMA>;
+				reset-names = "device", "root-complex";
+				interrupts-extended = <&gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+						      <&scu_ic0 2>;
+				pcie-device = "bmc";
+				aspeed,scu = <&syscon>;
+				status = "disabled";
+			};
+
+			video: video@1e700000 {
+				compatible = "aspeed,ast2600-video-engine";
+				reg = <0x1e700000 0x1000>;
+				clocks = <&syscon ASPEED_CLK_GATE_VCLK>,
+					 <&syscon ASPEED_CLK_GATE_ECLK>;
+				clock-names = "vclk", "eclk";
+				interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			gpio0: gpio@1e780000 {
 				#gpio-cells = <2>;
 				gpio-controller;
@@ -368,6 +408,7 @@
 						<&gic  GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB1>;
 				clock-names = "PCLK";
+				status = "disabled";
                         };
 
 			uart1: serial@1e783000 {
@@ -433,22 +474,23 @@
 					#size-cells = <1>;
 					ranges = <0x0 0x0 0x80>;
 
-					kcs1: kcs1@0 {
-						compatible = "aspeed,ast2600-kcs-bmc";
+					kcs1: kcs@24 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
 						interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 						kcs_chan = <1>;
 						status = "disabled";
 					};
-					kcs2: kcs2@0 {
-						compatible = "aspeed,ast2600-kcs-bmc";
+					kcs2: kcs@28 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
 						interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-						kcs_chan = <2>;
 						status = "disabled";
 					};
-					kcs3: kcs3@0 {
-						compatible = "aspeed,ast2600-kcs-bmc";
+					kcs3: kcs@2c {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
 						interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-						kcs_chan = <3>;
 						status = "disabled";
 					};
 				};
@@ -462,10 +504,10 @@
 					#size-cells = <1>;
 					ranges = <0x0 0x80 0x1e0>;
 
-					kcs4: kcs4@0 {
-						compatible = "aspeed,ast2600-kcs-bmc";
+					kcs4: kcs@94 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
 						interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-						kcs_chan = <4>;
 						status = "disabled";
 					};
 
diff --git a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
index 21876da7c442..c1c8650dafce 100644
--- a/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
+++ b/arch/arm/boot/dts/at91-dvk_su60_somc.dtsi
@@ -62,7 +62,7 @@
 	wm8904: wm8904@1a {
 		compatible = "wlf,wm8904";
 		reg = <0x1a>;
-		clocks = <&pck2>;
+		clocks = <&pmc PMC_TYPE_SYSTEM 10>;
 		clock-names = "mclk";
 	};
 };
diff --git a/arch/arm/boot/dts/at91-kizbox3-hs.dts b/arch/arm/boot/dts/at91-kizbox3-hs.dts
index 8734e7f8939e..0da1f0557eaf 100644
--- a/arch/arm/boot/dts/at91-kizbox3-hs.dts
+++ b/arch/arm/boot/dts/at91-kizbox3-hs.dts
@@ -283,7 +283,7 @@
 
 &flx3 {
 	status = "okay";
-	uart6: serial@200 {
+	uart8: serial@200 {
 		status = "okay";
 	};
 };
@@ -291,7 +291,7 @@
 &flx4 {
 	status = "okay";
 
-	i2c2: i2c@600 {
+	i2c6: i2c@600 {
 		status = "okay";
 	};
 };
diff --git a/arch/arm/boot/dts/at91-kizbox3_common.dtsi b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
index 299e74d23184..7c3076e245ef 100644
--- a/arch/arm/boot/dts/at91-kizbox3_common.dtsi
+++ b/arch/arm/boot/dts/at91-kizbox3_common.dtsi
@@ -28,7 +28,7 @@
 		serial3 = &uart3;
 		serial4 = &uart4;
 		serial5 = &uart5;
-		serial6 = &uart6;
+		serial6 = &uart8;
 	};
 
 	chosen {
@@ -207,7 +207,7 @@
 		};
 	};
 
-	pinctrl_flx4_default: flx4_i2c2_default {
+	pinctrl_flx4_default: flx4_i2c6_default {
 		pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
 		<PIN_PD13__FLEXCOM4_IO1>; //CLK
 		bias-disable;
@@ -299,21 +299,8 @@
 	status = "disabled";
 
 	uart5: serial@200  {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0x200 0x400>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-			| AT91_XDMAC_DT_PERID(11))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-			| AT91_XDMAC_DT_PERID(12))>;
-		dma-names = "tx", "rx";
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
-		clock-names = "usart";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx0_default>;
-		atmel,fifo-size = <32>;
 		atmel,use-dma-rx;
 		atmel,use-dma-tx;
 		status = "disabled";
@@ -324,22 +311,9 @@
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 	status = "disabled";
 
-	uart6: serial@200 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0x200 0x400>;
-		interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-			| AT91_XDMAC_DT_PERID(17))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-			| AT91_XDMAC_DT_PERID(18))>;
-		dma-names = "tx", "rx";
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
-		clock-names = "usart";
+	uart8: serial@200 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx3_default>;
-		atmel,fifo-size = <32>;
 		atmel,use-dma-rx;
 		atmel,use-dma-tx;
 		status = "disabled";
@@ -350,23 +324,9 @@
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 	status = "disabled";
 
-	i2c2: i2c@600 {
-		compatible = "atmel,sama5d2-i2c";
-		reg = <0x600 0x200>;
-		interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-			| AT91_XDMAC_DT_PERID(19))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-			| AT91_XDMAC_DT_PERID(20))>;
-		dma-names = "tx", "rx";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+	i2c6: i2c@600 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_flx4_default>;
-		atmel,fifo-size = <16>;
 		status = "disabled";
 	};
 };
diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts
index b484745bf2d4..a5f5718c711a 100644
--- a/arch/arm/boot/dts/at91-sam9x60ek.dts
+++ b/arch/arm/boot/dts/at91-sam9x60ek.dts
@@ -542,6 +542,18 @@
 		};
 	};
 
+	sdmmc1 {
+		pinctrl_sdmmc1_default: sdmmc1 {
+			atmel,pins =
+				<AT91_PIOA 13 AT91_PERIPH_B (AT91_PINCTRL_DRIVE_STRENGTH_HI)				/* PA13 CK periph B */
+				 AT91_PIOA 12 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA12 CMD periph B with pullup */
+				 AT91_PIOA 11 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA11 DAT0 periph B with pullup */
+				 AT91_PIOA  2 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA2 DAT1 periph B with pullup */
+				 AT91_PIOA  3 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)	/* PA3 DAT2 periph B with pullup */
+				 AT91_PIOA  4 AT91_PERIPH_B (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DRIVE_STRENGTH_HI)>;	/* PA4 DAT3 periph B with pullup */
+		};
+	};
+
 	gpio_keys {
 		pinctrl_key_gpio_default: pinctrl_key_gpio {
 			atmel,pins = <AT91_PIOD 18 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
@@ -568,6 +580,15 @@
 	disable-wp;
 };
 
+&sdmmc1 {
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc1_default>;
+	no-1-8-v;
+	non-removable;
+	status = "disabled"; /* Conflict with flx4. */
+};
+
 &qspi {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_qspi>;
@@ -579,6 +600,8 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
 		m25p,fast-read;
 
 		at91bootstrap@0 {
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
index 6281590150c8..b1f994c0ae79 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_som1.dtsi
@@ -13,6 +13,10 @@
 	model = "Atmel SAMA5D27 SoM1";
 	compatible = "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
 
+	aliases {
+		i2c0	= &i2c0;
+	};
+
 	clocks {
 		slow_xtal {
 			clock-frequency = <32768>;
@@ -34,12 +38,44 @@
 				pinctrl-0 = <&pinctrl_qspi1_default>;
 
 				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
 					compatible = "jedec,spi-nor";
 					reg = <0>;
 					spi-max-frequency = <80000000>;
 					spi-tx-bus-width = <4>;
 					spi-rx-bus-width = <4>;
 					m25p,fast-read;
+
+					at91bootstrap@00000000 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@00040000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@00100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@00140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@00180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@00200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
 				};
 			};
 
@@ -57,7 +93,25 @@
 				};
 			};
 
+			i2c0: i2c@f8028000 {
+				dmas = <0>, <0>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_i2c0_default>;
+				status = "okay";
+
+				at24@50 {
+					compatible = "24c02";
+					reg = <0x50>;
+					pagesize = <8>;
+				};
+			};
+
 			pinctrl@fc038000 {
+				pinctrl_i2c0_default: i2c0_default {
+					pinmux = <PIN_PD21__TWD0>,
+						 <PIN_PD22__TWCK0>;
+					bias-disable;
+				};
 
 				pinctrl_qspi1_default: qspi1_default {
 					sck_cs {
diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
index b0853bf7901c..0e159f879c15 100644
--- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
@@ -21,7 +21,7 @@
 		serial1 = &uart4;	/* mikro BUS 1 */
 		serial2 = &uart2;	/* mikro BUS 2 */
 		i2c1	= &i2c1;
-		i2c2	= &i2c2;
+		i2c2	= &i2c3;
 	};
 
 	chosen {
@@ -125,21 +125,13 @@
 				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 				status = "okay";
 
-				i2c2: i2c@600 {
-					compatible = "atmel,sama5d2-i2c";
-					reg = <0x600 0x200>;
-					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+				i2c3: i2c@600 {
 					dmas = <0>, <0>;
-					dma-names = "tx", "rx";
 					i2c-analog-filter;
 					i2c-digital-filter;
 					i2c-digital-filter-width-ns = <35>;
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_mikrobus_i2c>;
-					atmel,fifo-size = <16>;
 					status = "okay";
 				};
 			};
@@ -178,27 +170,17 @@
 				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
 				status = "disabled";
 
-				uart7: serial@200 {
-					compatible = "atmel,at91sam9260-usart";
-					reg = <0x200 0x200>;
-					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
-					clock-names = "usart";
+				uart8: serial@200 {
+					dmas = <0>, <0>;
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx3_default>;
-					atmel,fifo-size = <32>;
 					status = "disabled"; /* Conflict with isc. */
 				};
 
-				spi2: spi@400 {
-					compatible = "atmel,at91rm9200-spi";
-					reg = <0x400 0x200>;
-					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
-					clock-names = "spi_clk";
+				spi5: spi@400 {
+					dmas = <0>, <0>;
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx3_default>;
-					atmel,fifo-size = <16>;
 					status = "disabled"; /* Conflict with isc. */
 				};
 			};
@@ -207,43 +189,25 @@
 				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
 				status = "okay";
 
-				uart6: serial@200 {
-					compatible = "atmel,at91sam9260-usart";
-					reg = <0x200 0x200>;
-					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
-					clock-names = "usart";
+				uart9: serial@200 {
+					dmas = <0>, <0>;
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx4_default>;
-					atmel,fifo-size = <32>;
-					status = "disabled"; /* Conflict with spi3 and i2c3. */
+					status = "disabled"; /* Conflict with spi6 and i2c6. */
 				};
 
-				spi3: spi@400 {
-					compatible = "atmel,at91rm9200-spi";
-					reg = <0x400 0x200>;
-					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
-					clock-names = "spi_clk";
+				spi6: spi@400 {
+					dmas = <0>, <0>;
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
-					atmel,fifo-size = <16>;
-					status = "okay"; /* Conflict with uart6 and i2c3. */
+					status = "okay"; /* Conflict with uart5 and i2c6. */
 				};
 
-				i2c3: i2c@600 {
-					compatible = "atmel,sama5d2-i2c";
-					reg = <0x600 0x200>;
-					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+				i2c6: i2c@600 {
 					dmas = <0>, <0>;
-					dma-names = "tx", "rx";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx4_default>;
-					atmel,fifo-size = <16>;
-					status = "disabled"; /* Conflict with uart6 and spi3. */
+					status = "disabled"; /* Conflict with uart5 and spi6. */
 				};
 			};
 
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
index db3e2239eee8..a06700e53e4c 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1.dtsi
@@ -17,6 +17,10 @@
 	model = "Microchip SAMA5D27 WLSOM1";
 	compatible = "microchip,sama5d27-wlsom1", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
 
+	aliases {
+		i2c0 = &i2c0;
+	};
+
 	clocks {
 		slow_xtal {
 			clock-frequency = <32768>;
@@ -32,18 +36,6 @@
 	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
 
 	uart6: serial@200 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0x200 0x200>;
-		interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(13))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(14))>;
-		dma-names = "tx", "rx";
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
-		clock-names = "usart";
 		pinctrl-0 = <&pinctrl_flx1_default>;
 		pinctrl-names = "default";
 	};
diff --git a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
index 6b8461278950..6b38fa3f5568 100644
--- a/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d27_wlsom1_ek.dts
@@ -77,18 +77,6 @@
 	status = "okay";
 
 	uart5: serial@200 {
-		compatible = "atmel,at91sam9260-usart";
-		reg = <0x200 0x200>;
-		interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(11))>,
-		       <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
-			 AT91_XDMAC_DT_PERID(12))>;
-		dma-names = "tx", "rx";
-		clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
-		clock-names = "usart";
 		pinctrl-0 = <&pinctrl_flx0_default>;
 		pinctrl-names = "default";
 		atmel,use-dma-rx;
diff --git a/arch/arm/boot/dts/at91-sama5d2_icp.dts b/arch/arm/boot/dts/at91-sama5d2_icp.dts
new file mode 100644
index 000000000000..8d19925fc09e
--- /dev/null
+++ b/arch/arm/boot/dts/at91-sama5d2_icp.dts
@@ -0,0 +1,767 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * at91-sama5d2_icp.dts - Device Tree file for SAMA5D2-ICP board
+ *
+ *  Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ *	Author: Radu Pirea & Razvan Stefanescu,
+ *		Codrin Ciubotariu <codrin.ciubotariu@microchip.com>,
+ *		Cristian Birsan <cristian.birsan@microchip.com>
+ */
+/dts-v1/;
+#include "sama5d2.dtsi"
+#include "sama5d2-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/atmel-flexcom.h>
+
+/ {
+	model = "Microchip SAMA5D2-ICP";
+	compatible = "microchip,sama5d2-icp", "atmel,sama5d27", "atmel,sama5d2", "atmel,sama5";
+
+	aliases {
+		serial0 = &uart0;	/* debug uart0 + mikro BUS 1 */
+		serial1 = &uart1;	/* mikro BUS 3 */
+		serial3 = &uart3;	/* mikro BUS 2 */
+		serial5 = &uart7;	/* flx2 */
+		i2c0	= &i2c0;
+		i2c1	= &i2c1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clocks {
+		slow_xtal {
+			clock-frequency = <32768>;
+		};
+
+		main_xtal {
+			clock-frequency = <12000000>;
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+		status = "okay";
+
+		sw4 {
+			label = "USER_PB1";
+			gpios = <&pioA PIN_PD0 GPIO_ACTIVE_LOW>;
+			linux,code = <0x104>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+		status = "okay"; /* conflict with pwm0 */
+
+		red {
+			label = "red";
+			gpios = <&pioA PIN_PB0 GPIO_ACTIVE_HIGH>;
+		};
+
+		green {
+			label = "green";
+			gpios = <&pioA PIN_PB1 GPIO_ACTIVE_HIGH>;
+		};
+
+		blue {
+			label = "blue";
+			gpios = <&pioA PIN_PA31 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&adc {
+	vddana-supply = <&vdd_io_reg>;
+	vref-supply = <&vdd_io_reg>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc_default &pinctrl_adtrg_default>;
+	status = "okay";
+};
+
+&can0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+	status = "okay";
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1_default>;
+	status = "okay";
+};
+
+&flx0 { /* mikrobus2 spi */
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi2: spi@400 {
+		dmas = <0>, <0>;
+		cs-gpios = <&pioA PIN_PC0 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus2_spi &pinctrl_ksz_spi_cs>;
+		status = "okay";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		switch0: ksz8563@0 {
+			compatible = "microchip,ksz8563";
+			reg = <0>;
+			phy-mode = "mii";
+			reset-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_LOW>;
+
+			spi-max-frequency = <500000>;
+			spi-cpha;
+			spi-cpol;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				port@0 {
+					reg = <0>;
+					label = "lan1";
+				};
+
+				port@1 {
+					reg = <1>;
+					label = "lan2";
+				};
+
+				port@2 {
+					reg = <2>;
+					label = "cpu";
+					ethernet = <&macb0>;
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+			};
+		};
+	};
+};
+
+&flx2 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
+	status = "okay";
+
+	uart7: serial@200 {
+		pinctrl-0 = <&pinctrl_flx2_default>;
+		pinctrl-names = "default";
+		atmel,use-dma-rx;
+		atmel,use-dma-tx;
+		status = "okay"; /* Conflict w/ qspi1. */
+	};
+};
+
+&flx3 { /* mikrobus1 spi */
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
+	status = "okay";
+
+	spi5: spi@400 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mikrobus1_spi &pinctrl_mikrobus1_spi_cs>;
+		status = "okay";
+	};
+};
+
+&flx4 {
+	atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
+	status = "okay";
+
+	i2c6: i2c@600 {
+		dmas = <0>, <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_flx4_default>;
+		status = "okay";
+
+		mcp16502@5b {
+			compatible = "microchip,mcp16502";
+			reg = <0x5b>;
+			status = "okay";
+			lpm-gpios = <&pioBU 7 GPIO_ACTIVE_LOW>;
+
+			regulators {
+				vdd_io_reg: VDD_IO {
+					regulator-name = "VDD_IO";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_DDR {
+					regulator-name = "VDD_DDR";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1850000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_CORE {
+					regulator-name = "VDD_CORE";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1850000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				VDD_OTHER {
+					regulator-name = "VDD_OTHER";
+					regulator-min-microvolt = <600000>;
+					regulator-max-microvolt = <1850000>;
+					regulator-initial-mode = <2>;
+					regulator-allowed-modes = <2>, <4>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+						regulator-mode = <4>;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+						regulator-mode = <4>;
+					};
+				};
+
+				LDO1 {
+					regulator-name = "LDO1";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+				LDO2 {
+					regulator-name = "LDO2";
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+
+					regulator-state-standby {
+						regulator-on-in-suspend;
+					};
+
+					regulator-state-mem {
+						regulator-off-in-suspend;
+					};
+				};
+
+			};
+		};
+	};
+};
+
+&i2c0 { /* mikrobus i2c */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus_i2c>;
+	status = "okay";
+};
+
+&i2c1 {
+	dmas = <0>, <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "atmel,24c32";
+		reg = <0x50>;
+		pagesize = <16>;
+		status = "okay";
+	};
+
+	eeprom@52 {
+		compatible = "atmel,24c32";
+		reg = <0x52>;
+		pagesize = <16>;
+		status = "disabled";
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c32";
+		reg = <0x53>;
+		pagesize = <16>;
+		status = "disabled";
+	};
+};
+
+&macb0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_macb0_default &pinctrl_macb0_phy_irq &pinctrl_macb0_rst>;
+	phy-mode = "mii";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+};
+
+&pioA {
+	pinctrl_adc_default: adc_default {
+		pinmux = <PIN_PD24__GPIO>,
+				<PIN_PD25__GPIO>,
+				<PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	/*
+	 * The ADTRG pin can work on any edge type.
+	 * In here it's being pulled up, so need to
+	 * connect it to ground to get an edge e.g.
+	 * Trigger can be configured on falling, rise
+	 * or any edge, and the pull-up can be changed
+	 * to pull-down or left floating according to
+	 * needs.
+	 */
+	pinctrl_adtrg_default: adtrg_default {
+		pinmux = <PIN_PD31__ADTRG>;
+		bias-pull-up;
+	};
+
+	pinctrl_flx4_default: flx4_default {
+		pinmux = <PIN_PC28__FLEXCOM4_IO0>,
+			 <PIN_PC29__FLEXCOM4_IO1>;
+		bias-disable;
+	};
+
+	pinctrl_can0_default: can0_default {
+		pinmux = <PIN_PC10__CANTX0>,
+			 <PIN_PC11__CANRX0>;
+		bias-disable;
+	};
+
+	pinctrl_can1_default: can1_default {
+		pinmux = <PIN_PC26__CANTX1>,
+			 <PIN_PC27__CANRX1>;
+		bias-disable;
+	};
+
+	pinctrl_i2c1_default: i2c1_default {
+		pinmux = <PIN_PD19__TWD1>,
+			 <PIN_PD20__TWCK1>;
+		bias-disable;
+	};
+
+	pinctrl_key_gpio_default: key_gpio_default {
+		pinmux = <PIN_PD0__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led_gpio_default {
+		pinmux = <PIN_PB0__GPIO>,
+			 <PIN_PB1__GPIO>,
+			 <PIN_PA31__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_qspi1_default: qspi1_default {
+		pinmux = <PIN_PA6__QSPI1_SCK>,
+			 <PIN_PA7__QSPI1_IO0>,
+			 <PIN_PA8__QSPI1_IO1>,
+			 <PIN_PA9__QSPI1_IO2>,
+			 <PIN_PA10__QSPI1_IO3>,
+			 <PIN_PA11__QSPI1_CS>;
+		bias-disable;
+	};
+
+	pinctrl_sdmmc0_default: sdmmc0_default {
+		cmd_data {
+			pinmux = <PIN_PA1__SDMMC0_CMD>,
+				 <PIN_PA2__SDMMC0_DAT0>,
+				 <PIN_PA3__SDMMC0_DAT1>,
+				 <PIN_PA4__SDMMC0_DAT2>,
+				 <PIN_PA5__SDMMC0_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd {
+			pinmux = <PIN_PA0__SDMMC0_CK>,
+				 <PIN_PA13__SDMMC0_CD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_sdmmc1_default: sdmmc1_default {
+		cmd_data {
+			pinmux = <PIN_PA18__SDMMC1_DAT0>,
+				 <PIN_PA19__SDMMC1_DAT1>,
+				 <PIN_PA20__SDMMC1_DAT2>,
+				 <PIN_PA21__SDMMC1_DAT3>;
+			bias-disable;
+		};
+
+		ck_cd {
+			pinmux = <PIN_PA22__SDMMC1_CK>,
+				 <PIN_PA28__SDMMC1_CMD>;
+			bias-disable;
+		};
+	};
+
+	pinctrl_mikrobus_i2c: mikrobus_i2c {
+		pinmux = <PIN_PD22__TWCK0>,
+			 <PIN_PD21__TWD0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_an: mikrobus1_an {
+		pinmux = <PIN_PD26__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_rst: mikrobus1_rst {
+		pinmux = <PIN_PC5__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi_cs: mikrobus1_spi_cs {
+		pinmux = <PIN_PC21__FLEXCOM3_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_spi: mikrobus1_spi {
+		pinmux = <PIN_PC20__FLEXCOM3_IO0>,
+			 <PIN_PC19__FLEXCOM3_IO1>,
+			 <PIN_PC18__FLEXCOM3_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_pwm: mikrobus1_pwm {
+		pinmux = <PIN_PC4__TIOB1>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_int: mikrobus1_int {
+		pinmux = <PIN_PC3__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus1_uart: mikrobus1_uart {
+		pinmux = <PIN_PB26__URXD0>,
+			 <PIN_PB27__UTXD0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_an: mikrobus2_an {
+		pinmux = <PIN_PD25__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_rst: mikrobus2_rst {
+		pinmux = <PIN_PB24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_spi_cs: mikrobus2_spi_cs {
+		pinmux = <PIN_PB31__FLEXCOM0_IO3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_spi: mikrobus2_spi {
+		pinmux = <PIN_PB28__FLEXCOM0_IO0>,
+			 <PIN_PB29__FLEXCOM0_IO1>,
+			 <PIN_PB30__FLEXCOM0_IO2>;
+		bias-disable;
+	};
+
+	pinctrl_ksz_spi_cs: ksz_spi_cs {
+		pinmux = <PIN_PC0__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_pwm: mikrobus2_pwm {
+		pinmux = <PIN_PB23__TIOB2>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_int: mikrobus2_int {
+		pinmux = <PIN_PB22__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus2_uart: mikrobus2_uart {
+		pinmux = <PIN_PC12__URXD3>,
+			 <PIN_PC13__UTXD3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_an: mikrobus3_an {
+		pinmux = <PIN_PD24__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_rst: mikrobus3_rst {
+		pinmux = <PIN_PB21__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_spi_cs: mikrobus3_spi_cs {
+		pinmux = <PIN_PA17__SPI0_NPCS0>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_spi: mikrobus3_spi {
+		pinmux = <PIN_PA14__SPI0_SPCK>,
+			 <PIN_PA16__SPI0_MISO>,
+			 <PIN_PA15__SPI0_MOSI>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_pwm: mikrobus3_pwm {
+		pinmux = <PIN_PB20__TIOB3>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_int: mikrobus3_int {
+		pinmux = <PIN_PB18__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_mikrobus3_uart: mikrobus3_uart {
+		pinmux = <PIN_PC7__URXD1>,
+			 <PIN_PC8__UTXD1>;
+		bias-disable;
+	};
+
+	pinctrl_usb_default: usb_default {
+		pinmux = <PIN_PC17__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_usba_vbus: usba_vbus {
+		pinmux = <PIN_PD23__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_pwm0_pwm2_default: pwm0_pwm2_default {
+		pinmux = <PIN_PB5__PWMH2>,
+			 <PIN_PB6__PWML2>;
+		bias-pull-up;
+	};
+
+	pinctrl_macb0_default: macb0_default {
+		pinmux = <PIN_PD1__GRXCK>,
+			 <PIN_PD2__GTXER>,
+			 <PIN_PD5__GRX2>,
+			 <PIN_PD6__GRX3>,
+			 <PIN_PD7__GTX2>,
+			 <PIN_PD8__GTX3>,
+			 <PIN_PD9__GTXCK>,
+			 <PIN_PD10__GTXEN>,
+			 <PIN_PD11__GRXDV>,
+			 <PIN_PD12__GRXER>,
+			 <PIN_PD13__GRX0>,
+			 <PIN_PD14__GRX1>,
+			 <PIN_PD15__GTX0>,
+			 <PIN_PD16__GTX1>,
+			 <PIN_PD17__GMDC>,
+			 <PIN_PD18__GMDIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_phy_irq: macb0_phy_irq {
+		pinmux = <PIN_PD3__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_macb0_rst: macb0_sw_rst {
+		pinmux = <PIN_PD4__GPIO>;
+		bias-disable;
+	};
+
+	pinctrl_flx2_default: flx2_default {
+		pinmux = <PIN_PA6__FLEXCOM2_IO0>,
+			 <PIN_PA7__FLEXCOM2_IO1>,
+			 <PIN_PA9__FLEXCOM2_IO3>,
+			 <PIN_PA10__FLEXCOM2_IO4>;
+		bias-disable;
+	};
+};
+
+&pwm0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm0_pwm2_default>;
+	status = "disabled"; /* conflict with leds, HSIC */
+};
+
+&qspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi1_default>;
+	status = "disabled"; /* Conflict with wilc_pwrseq, flx2 */
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <80000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		m25p,fast-read;
+
+		at91bootstrap@0 {
+			label = "qspi: at91bootstrap";
+			reg = <0x00000000 0x00040000>;
+		};
+
+		bootloader@40000 {
+			label = "qspi: bootloader";
+			reg = <0x00040000 0x000c0000>;
+		};
+
+		bootloaderenvred@100000 {
+			label = "qspi: bootloader env redundant";
+			reg = <0x00100000 0x00040000>;
+		};
+
+		bootloaderenv@140000 {
+			label = "qspi: bootloader env";
+			reg = <0x00140000 0x00040000>;
+		};
+
+		dtb@180000 {
+			label = "qspi: device tree";
+			reg = <0x00180000 0x00080000>;
+		};
+
+		kernel@200000 {
+			label = "qspi: kernel";
+			reg = <0x00200000 0x00600000>;
+		};
+	};
+};
+
+&sdmmc0 {
+	no-1-8-v;
+	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_sdmmc0_default>;
+	status = "okay";
+};
+
+&shutdown_controller {
+	atmel,shdwc-debouncer = <976>;
+	atmel,wakeup-rtc-timer;
+
+	input@0 {
+		reg = <0>;
+		atmel,wakeup-type = "low";
+	};
+};
+
+&spi0 {  /* mikrobus3 spi */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus3_spi &pinctrl_mikrobus3_spi_cs>;
+	status = "okay";
+};
+
+&tcb0 {
+	timer0: timer@0 {
+		compatible = "atmel,tcb-timer";
+		reg = <0>;
+	};
+
+	timer1: timer@1 {
+		compatible = "atmel,tcb-timer";
+		reg = <1>;
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus1_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus3_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mikrobus2_uart>;
+	atmel,use-dma-rx;
+	atmel,use-dma-tx;
+	status = "okay";
+};
+
+&usb0 {
+	atmel,vbus-gpio = <&pioA PIN_PD23 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usba_vbus>;
+	status = "okay";
+};
+
+&usb1 {
+	num-ports = <3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_default>;
+	status = "okay";
+};
+
+&usb2 {
+	phy_type = "hsic";
+	status = "okay";
+};
+
+&watchdog {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
index 1c24ac8019ba..c894c7c788a9 100644
--- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
@@ -18,9 +18,9 @@
 	compatible = "atmel,sama5d2-ptc_ek", "atmel,sama5d2", "atmel,sama5";
 
 	aliases {
-		serial0 = &uart0;
-		i2c0	= &i2c0;
-		i2c1	= &i2c1;
+		serial0 = &uart0;	/* DBGU */
+		i2c0	= &i2c0;	/* mikroBUS 1 */
+		i2c1	= &i2c1;	/* XPRO EXT1 */
 		i2c2	= &i2c2;
 	};
 
@@ -40,7 +40,7 @@
 
 	ahb {
 		usb0: gadget@300000 {
-			atmel,vbus-gpio = <&pioA PIN_PA27 GPIO_ACTIVE_HIGH>;
+			atmel,vbus-gpio = <&pioA PIN_PB11 GPIO_ACTIVE_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usba_vbus>;
 			status = "okay";
@@ -125,8 +125,6 @@
 			bus-width = <8>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_sdmmc0_default>;
-			non-removable;
-			mmc-ddr-1_8v;
 			status = "okay";
 		};
 
@@ -184,7 +182,7 @@
 				pinctrl-0 = <&pinctrl_i2c0_default>;
 				pinctrl-1 = <&pinctrl_i2c0_gpio>;
 				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 			};
 
@@ -193,20 +191,12 @@
 				status = "okay";
 
 				i2c2: i2c@600 {
-					compatible = "atmel,sama5d2-i2c";
-					reg = <0x600 0x200>;
-					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
 					dmas = <0>, <0>;
-					dma-names = "tx", "rx";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 					pinctrl-names = "default", "gpio";
 					pinctrl-0 = <&pinctrl_flx0_default>;
 					pinctrl-1 = <&pinctrl_flx0_gpio>;
 					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
-					scl-gpios = <&pioA PIN_PB29 GPIO_ACTIVE_HIGH>;
-					atmel,fifo-size = <16>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 					status = "okay";
 				};
 			};
@@ -236,7 +226,7 @@
 				pinctrl-0 = <&pinctrl_i2c1_default>;
 				pinctrl-1 = <&pinctrl_i2c1_gpio>;
 				sda-gpios = <&pioA PIN_PC6 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA PIN_PC7 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PC7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
 				at24@50 {
@@ -414,6 +404,7 @@
 			label = "PB_USER";
 			gpios = <&pioA PIN_PA10 GPIO_ACTIVE_LOW>;
 			linux,code = <0x104>;
+			wakeup-source;
 		};
 	};
 
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index 055ee53e4773..a927165ea7c2 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -16,6 +16,13 @@
 	model = "Atmel SAMA5D2 Xplained";
 	compatible = "atmel,sama5d2-xplained", "atmel,sama5d2", "atmel,sama5";
 
+	aliases {
+		serial0 = &uart1;	/* DBGU */
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;		/* XPRO EXT2 */
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -72,6 +79,58 @@
 		};
 
 		apb {
+			qspi0: spi@f0020000 {
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_qspi0_default>;
+				status = "disabled"; /* conflict with sdmmc1 */
+
+				flash@0 {
+					#address-cells = <1>;
+					#size-cells = <1>;
+					compatible = "jedec,spi-nor";
+					reg = <0>;
+					spi-max-frequency = <80000000>;
+					spi-tx-bus-width = <4>;
+					spi-rx-bus-width = <4>;
+					m25p,fast-read;
+
+					at91bootstrap@00000000 {
+						label = "at91bootstrap";
+						reg = <0x00000000 0x00040000>;
+					};
+
+					bootloader@00040000 {
+						label = "bootloader";
+						reg = <0x00040000 0x000c0000>;
+					};
+
+					bootloaderenvred@00100000 {
+						label = "bootloader env redundant";
+						reg = <0x00100000 0x00040000>;
+					};
+
+					bootloaderenv@00140000 {
+						label = "bootloader env";
+						reg = <0x00140000 0x00040000>;
+					};
+
+					dtb@00180000 {
+						label = "device tree";
+						reg = <0x00180000 0x00080000>;
+					};
+
+					kernel@00200000 {
+						label = "kernel";
+						reg = <0x00200000 0x00600000>;
+					};
+
+					misc@00800000 {
+						label = "misc";
+						reg = <0x00800000 0x00000000>;
+					};
+				};
+			};
+
 			spi0: spi@f8000000 {
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0_default>;
@@ -133,7 +192,7 @@
 				pinctrl-0 = <&pinctrl_i2c0_default>;
 				pinctrl-1 = <&pinctrl_i2c0_gpio>;
 				sda-gpios = <&pioA PIN_PD21 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA PIN_PD22 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				i2c-sda-hold-time-ns = <350>;
 				status = "okay";
 
@@ -275,16 +334,25 @@
 				status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
 
 				uart5: serial@200 {
-					compatible = "atmel,at91sam9260-usart";
-					reg = <0x200 0x200>;
-					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
-					clock-names = "usart";
+					dmas = <0>, <0>;
 					pinctrl-names = "default";
 					pinctrl-0 = <&pinctrl_flx0_default>;
-					atmel,fifo-size = <32>;
 					status = "okay";
 				};
+
+				i2c2: i2c@600 {
+					dmas = <0>, <0>;
+					pinctrl-names = "default", "gpio";
+					pinctrl-0 = <&pinctrl_flx0_default>;
+					pinctrl-1 = <&pinctrl_i2c2_gpio>;
+					sda-gpios = <&pioA PIN_PB28 GPIO_ACTIVE_HIGH>;
+					scl-gpios = <&pioA PIN_PB29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+					i2c-sda-hold-time-ns = <350>;
+					i2c-analog-filter;
+					i2c-digital-filter;
+					i2c-digital-filter-width-ns = <35>;
+					status = "disabled"; /* conflict with ISC_D2 & ISC_D3 data pins */
+				};
 			};
 
 			shdwc@f8048010 {
@@ -325,21 +393,13 @@
 				atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
 				status = "okay";
 
-				i2c2: i2c@600 {
-					compatible = "atmel,sama5d2-i2c";
-					reg = <0x600 0x200>;
-					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+				i2c6: i2c@600 {
 					dmas = <0>, <0>;
-					dma-names = "tx", "rx";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
 					pinctrl-names = "default", "gpio";
 					pinctrl-0 = <&pinctrl_flx4_default>;
 					pinctrl-1 = <&pinctrl_flx4_gpio>;
 					sda-gpios = <&pioA PIN_PD12 GPIO_ACTIVE_HIGH>;
-					scl-gpios = <&pioA PIN_PD13 GPIO_ACTIVE_HIGH>;
-					atmel,fifo-size = <16>;
+					scl-gpios = <&pioA PIN_PD13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 					i2c-analog-filter;
 					i2c-digital-filter;
 					i2c-digital-filter-width-ns = <35>;
@@ -356,7 +416,7 @@
 				i2c-digital-filter-width-ns = <35>;
 				pinctrl-1 = <&pinctrl_i2c1_gpio>;
 				sda-gpios = <&pioA PIN_PD4 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA PIN_PD5 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA PIN_PD5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				status = "okay";
 
 				at24@54 {
@@ -480,6 +540,12 @@
 					bias-disable;
 				};
 
+				pinctrl_i2c2_gpio: i2c2_gpio {
+					pinmux = <PIN_PB28__GPIO>,
+						 <PIN_PB29__GPIO>;
+					bias-disable;
+				};
+
 				pinctrl_i2s0_default: i2s0_default {
 					pinmux = <PIN_PC1__I2SC0_CK>,
 						 <PIN_PC2__I2SC0_MCK>,
@@ -535,6 +601,22 @@
 					bias-disable;
 				};
 
+				pinctrl_qspi0_default: qspi0_default {
+					sck_cs {
+						pinmux = <PIN_PA22__QSPI0_SCK>,
+							 <PIN_PA23__QSPI0_CS>;
+						bias-disable;
+					};
+
+					data {
+						pinmux = <PIN_PA24__QSPI0_IO0>,
+							 <PIN_PA25__QSPI0_IO1>,
+							 <PIN_PA26__QSPI0_IO2>,
+							 <PIN_PA27__QSPI0_IO3>;
+						bias-pull-up;
+					};
+				};
+
 				pinctrl_sdmmc0_default: sdmmc0_default {
 					cmd_data {
 						pinmux = <PIN_PA1__SDMMC0_CMD>,
diff --git a/arch/arm/boot/dts/at91-wb50n.dtsi b/arch/arm/boot/dts/at91-wb50n.dtsi
index 4ed8500a5cb8..1487b893cfa7 100644
--- a/arch/arm/boot/dts/at91-wb50n.dtsi
+++ b/arch/arm/boot/dts/at91-wb50n.dtsi
@@ -46,10 +46,6 @@
 	atmel,osc-bypass;
 };
 
-&usart1_clk {
-	atmel,clk-output-range = <0 132000000>;
-};
-
 &mmc0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi
index 44385718d9d4..a5040f5ea641 100644
--- a/arch/arm/boot/dts/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/at91rm9200.dtsi
@@ -101,259 +101,9 @@
 				compatible = "atmel,at91rm9200-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <3>;
-					atmel,pll-clk-output-ranges = <80000000 160000000 0>,
-								<150000000 180000000 2>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <1000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <3>;
-					atmel,pll-clk-output-ranges = <80000000 160000000 0>,
-								<150000000 180000000 2>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-					atmel,clk-output-range = <0 80000000>;
-					atmel,clk-divisors = <1 2 3 4>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91rm9200-clk-usb";
-					#clock-cells = <0>;
-					atmel,clk-divisors = <1 2 0 0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91rm9200-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-
-					prog2: prog2 {
-						#clock-cells = <0>;
-						reg = <2>;
-						interrupts = <AT91_PMC_PCKRDY(2)>;
-					};
-
-					prog3: prog3 {
-						#clock-cells = <0>;
-						reg = <3>;
-						interrupts = <AT91_PMC_PCKRDY(3)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&usb>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <4>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-
-					pck2: pck2 {
-						#clock-cells = <0>;
-						reg = <10>;
-						clocks = <&prog2>;
-					};
-
-					pck3: pck3 {
-						#clock-cells = <0>;
-						reg = <11>;
-						clocks = <&prog3>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					pioD_clk: pioD_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					udc_clk: udc_clk {
-						#clock-cells = <0>;
-						reg = <11>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <12>;
-						#clock-cells = <0>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					ssc2_clk: ssc2_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					tc0_clk: tc0_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tc1_clk: tc1_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					tc2_clk: tc2_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					tc3_clk: tc3_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					tc4_clk: tc4_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					tc5_clk: tc5_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					ohci_clk: ohci_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&slow_xtal>, <&main_xtal>;
+				clock-names = "slow_xtal", "main_xtal";
 			};
 
 			st: timer@fffffd00 {
@@ -383,7 +133,7 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0
 					      18 IRQ_TYPE_LEVEL_HIGH 0
 					      19 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>, <&slow_xtal>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 19>, <&slow_xtal>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
@@ -395,7 +145,7 @@
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0
 					      21 IRQ_TYPE_LEVEL_HIGH 0
 					      22 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>, <&slow_xtal>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&pmc PMC_TYPE_PERIPHERAL 21>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&slow_xtal>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
@@ -405,7 +155,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_twi>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -415,7 +165,7 @@
 				compatible = "atmel,hsmci";
 				reg = <0xfffb4000 0x4000>;
 				interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -429,7 +179,7 @@
 				interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -440,7 +190,7 @@
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&ssc1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -451,7 +201,7 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>;
-				clocks = <&ssc2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -463,7 +213,7 @@
 				phy-mode = "rmii";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&macb0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
 				clock-names = "ether_clk";
 				status = "disabled";
 			};
@@ -803,7 +553,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -814,7 +564,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -825,7 +575,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 
 				pioD: gpio@fffffa00 {
@@ -836,7 +586,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioD_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				};
 			};
 
@@ -846,7 +596,7 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -859,7 +609,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -872,7 +622,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -885,7 +635,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -898,7 +648,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart3>;
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -907,7 +657,7 @@
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffb0000 0x4000>;
 				interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udc_clk>, <&udpck>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>, <&pmc PMC_TYPE_SYSTEM 2>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
@@ -920,7 +670,7 @@
 				interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -947,7 +697,7 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00300000 0x100000>;
 			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&ohci_clk>, <&ohci_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 4>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index fd179097a4bf..3034c23e697d 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -103,14 +103,14 @@
 			ramc0: ramc@ffffe400 {
 				compatible = "atmel,at91sam9g45-ddramc";
 				reg = <0xffffe400 0x200>;
-				clocks = <&ddrck>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
 				clock-names = "ddrck";
 			};
 
 			ramc1: ramc@ffffe600 {
 				compatible = "atmel,at91sam9g45-ddramc";
 				reg = <0xffffe600 0x200>;
-				clocks = <&ddrck>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
 				clock-names = "ddrck";
 			};
 
@@ -128,271 +128,9 @@
 				compatible = "atmel,at91sam9g45-pmc", "syscon";
 				reg = <0xfffffc00 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91rm9200-clk-main";
-					#clock-cells = <0>;
-					clocks = <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <2000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <745000000 800000000 0 0
-								       695000000 750000000 1 0
-								       645000000 700000000 2 0
-								       595000000 650000000 3 0
-								       545000000 600000000 0 1
-								       495000000 555000000 1 1
-								       445000000 500000000 2 1
-								       400000000 450000000 3 1>;
-				};
-
-				plladiv: plladivck {
-					compatible = "atmel,at91sam9x5-clk-plldiv";
-					#clock-cells = <0>;
-					clocks = <&plla>;
-				};
-
-				utmi: utmick {
-					compatible = "atmel,at91sam9x5-clk-utmi";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKU>;
-					clocks = <&main>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91rm9200-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
-					atmel,clk-output-range = <0 133333333>;
-					atmel,clk-divisors = <1 2 4 3>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91sam9x5-clk-usb";
-					#clock-cells = <0>;
-					clocks = <&plladiv>, <&utmi>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91sam9g45-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					ddrck: ddrck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&mck>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91rm9200-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					pioDE_clk: pioDE_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					trng_clk: trng_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <11>;
-					};
-
-					twi0_clk: twi0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					twi1_clk: twi1_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					tcb0_clk: tcb0_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					dma0_clk: dma0_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					uhphs_clk: uhphs_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					lcd_clk: lcd_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					ac97_clk: ac97_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-					};
-
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-
-					isi_clk: isi_clk {
-						#clock-cells = <0>;
-						reg = <26>;
-					};
-
-					udphs_clk: udphs_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-
-					aestdessha_clk: aestdessha_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-
-					mci1_clk: mci1_clk {
-						#clock-cells = <0>;
-						reg = <29>;
-					};
-
-					vdec_clk: vdec_clk {
-						#clock-cells = <0>;
-						reg = <30>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
 			};
 
 			rstc@fffffd00 {
@@ -405,7 +143,7 @@
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
 
@@ -421,7 +159,7 @@
 				#size-cells = <0>;
 				reg = <0xfff7c000 0x100>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
@@ -431,7 +169,7 @@
 				#size-cells = <0>;
 				reg = <0xfffd4000 0x100>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
 				clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
 			};
 
@@ -440,7 +178,7 @@
 				reg = <0xffffec00 0x200>;
 				interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
-				clocks = <&dma0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 				clock-names = "dma_clk";
 			};
 
@@ -883,7 +621,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff400 {
@@ -894,7 +632,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioC: gpio@fffff600 {
@@ -905,7 +643,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
 				};
 
 				pioD: gpio@fffff800 {
@@ -916,7 +654,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioDE_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				};
 
 				pioE: gpio@fffffa00 {
@@ -927,7 +665,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioDE_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				};
 			};
 
@@ -937,7 +675,7 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -950,7 +688,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -963,7 +701,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -976,7 +714,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -989,7 +727,7 @@
 				atmel,use-dma-tx;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -1000,7 +738,7 @@
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb_rmii>;
-				clocks = <&macb0_clk>, <&macb0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_PERIPHERAL 25>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
@@ -1009,7 +747,7 @@
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xfffcc000 0x100>;
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&trng_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 			};
 
 			i2c0: i2c@fff84000 {
@@ -1020,7 +758,7 @@
 				pinctrl-0 = <&pinctrl_i2c0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				status = "disabled";
 			};
 
@@ -1032,7 +770,7 @@
 				pinctrl-0 = <&pinctrl_i2c1>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				status = "disabled";
 			};
 
@@ -1042,7 +780,7 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -1053,7 +791,7 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&ssc1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -1064,7 +802,7 @@
 				interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ac97>;
-				clocks = <&ac97_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
 				clock-names = "ac97_clk";
 				status = "disabled";
 			};
@@ -1075,7 +813,7 @@
 				compatible = "atmel,at91sam9g45-adc";
 				reg = <0xfffb0000 0x100>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&adc_clk>, <&adc_op_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
 				clock-names = "adc_clk", "adc_op_clk";
 				atmel,adc-channels-used = <0xff>;
 				atmel,adc-vref = <3300>;
@@ -1111,7 +849,7 @@
 				compatible = "atmel,at91sam9g45-isi";
 				reg = <0xfffb4000 0x4000>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
-				clocks = <&isi_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
 				clock-names = "isi_clk";
 				status = "disabled";
 				port {
@@ -1125,7 +863,7 @@
 				reg = <0xfffb8000 0x300>;
 				interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
 				#pwm-cells = <3>;
-				clocks = <&pwm_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 				status = "disabled";
 			};
 
@@ -1138,7 +876,7 @@
 				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
 				clock-names = "mci_clk";
 				status = "disabled";
 			};
@@ -1152,7 +890,7 @@
 				dma-names = "rxtx";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
 				clock-names = "mci_clk";
 				status = "disabled";
 			};
@@ -1176,7 +914,7 @@
 				interrupts = <14 4 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -1189,7 +927,7 @@
 				interrupts = <15 4 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -1201,7 +939,7 @@
 				reg = <0x00600000 0x80000
 				       0xfff78000 0x400>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&udphs_clk>, <&utmi>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 
@@ -1294,7 +1032,7 @@
 			interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_fb>;
-			clocks = <&lcd_clk>, <&lcd_clk>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
 			clock-names = "hclk", "lcdc_clk";
 			status = "disabled";
 		};
@@ -1303,7 +1041,7 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
@@ -1312,7 +1050,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00800000 0x100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&utmi>, <&uhphs_clk>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
 			clock-names = "usb_clk", "ehci_clk";
 			status = "disabled";
 		};
@@ -1330,7 +1068,7 @@
 				  0x3 0x0 0x40000000 0x10000000
 				  0x4 0x0 0x50000000 0x10000000
 				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			status = "disabled";
 
 			nand_controller: nand-controller {
diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts
index 84bed6f55fcd..a3a5c82d9f29 100644
--- a/arch/arm/boot/dts/at91sam9m10g45ek.dts
+++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts
@@ -72,9 +72,9 @@
 					pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
 					resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
 					pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
-					clocks = <&pck1>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
 					clock-names = "xvclk";
-					assigned-clocks = <&pck1>;
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
 					assigned-clock-rates = <25000000>;
 
 					port {
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index ea675174432e..a994d076dc7e 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -104,7 +104,7 @@
 			ramc0: ramc@ffffe800 {
 				compatible = "atmel,at91sam9g45-ddramc";
 				reg = <0xffffe800 0x200>;
-				clocks = <&ddrck>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>;
 				clock-names = "ddrck";
 			};
 
@@ -116,278 +116,10 @@
 			pmc: pmc@fffffc00 {
 				compatible = "atmel,at91sam9n12-pmc", "syscon";
 				reg = <0xfffffc00 0x200>;
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_rc_osc: main_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
-					clock-frequency = <12000000>;
-					clock-accuracy = <50000000>;
-				};
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91sam9x5-clk-main";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
-					clocks = <&main_rc_osc>, <&main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <2000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
-								      <695000000 750000000 1 0>,
-								      <645000000 700000000 2 0>,
-								      <595000000 650000000 3 0>,
-								      <545000000 600000000 0 1>,
-								      <495000000 555000000 1 1>,
-								      <445000000 500000000 2 1>,
-								      <400000000 450000000 3 1>;
-				};
-
-				plladiv: plladivck {
-					compatible = "atmel,at91sam9x5-clk-plldiv";
-					#clock-cells = <0>;
-					clocks = <&plla>;
-				};
-
-				pllb: pllbck {
-					compatible = "atmel,at91rm9200-clk-pll";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_LOCKB>;
-					clocks = <&main>;
-					reg = <1>;
-					atmel,clk-input-range = <2000000 32000000>;
-					#atmel,pll-clk-output-range-cells = <3>;
-					atmel,pll-clk-output-ranges = <30000000 100000000 0>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91sam9x5-clk-master";
-					#clock-cells = <0>;
-					interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>;
-					atmel,clk-output-range = <0 133333333>;
-					atmel,clk-divisors = <1 2 4 3>;
-					atmel,master-clk-have-div3-pres;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91sam9n12-clk-usb";
-					#clock-cells = <0>;
-					clocks = <&pllb>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91sam9x5-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					ddrck: ddrck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&mck>;
-					};
-
-					lcdck: lcdck {
-						#clock-cells = <0>;
-						reg = <3>;
-						clocks = <&mck>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91sam9x5-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					pioAB_clk: pioAB_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					pioCD_clk: pioCD_clk {
-						#clock-cells = <0>;
-						reg = <3>;
-					};
-
-					fuse_clk: fuse_clk {
-						#clock-cells = <0>;
-						reg = <4>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <9>;
-						#clock-cells = <0>;
-					};
-
-					twi1_clk: twi1_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-					};
-
-					uart0_clk: uart0_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-					};
-
-					uart1_clk: uart1_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-					};
-
-					tcb_clk: tcb_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <18>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-					};
-
-					dma0_clk: dma0_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-					};
-
-					uhphs_clk: uhphs_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					udphs_clk: udphs_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-
-					lcdc_clk: lcdc_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-					};
-
-					sha_clk: sha_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-
-					aes_clk: aes_clk {
-						#clock-cells = <0>;
-						reg = <29>;
-					};
-
-					trng_clk: trng_clk {
-						#clock-cells = <0>;
-						reg = <30>;
-					};
-				};
 			};
 
 			rstc@fffffe00 {
@@ -400,7 +132,7 @@
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
 			shdwc@fffffe10 {
@@ -439,7 +171,7 @@
 				interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
 				dma-names = "rxtx";
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "mci_clk";
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -452,7 +184,7 @@
 				#size-cells = <0>;
 				reg = <0xf8008000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>, <&clk32k>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
 				clock-names = "t0_clk", "slow_clk";
 			};
 
@@ -462,7 +194,7 @@
 				#size-cells = <0>;
 				reg = <0xf800c000 0x100>;
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb_clk>, <&clk32k>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
 				clock-names = "t0_clk", "slow_clk";
 			};
 
@@ -470,7 +202,7 @@
 				compatible = "atmel,at91sam9n12-hlcdc";
 				reg = <0xf8038000 0x2000>;
 				interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
 				clock-names = "periph_clk", "sys_clk", "slow_clk";
 				status = "disabled";
 
@@ -499,7 +231,7 @@
 				reg = <0xffffec00 0x200>;
 				interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
-				clocks = <&dma0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 				clock-names = "dma_clk";
 			};
 
@@ -817,7 +549,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioAB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioB: gpio@fffff600 {
@@ -828,7 +560,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioAB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				};
 
 				pioC: gpio@fffff800 {
@@ -839,7 +571,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioCD_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 
 				pioD: gpio@fffffa00 {
@@ -850,7 +582,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioCD_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
 				};
 			};
 
@@ -860,7 +592,7 @@
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -874,7 +606,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -885,7 +617,7 @@
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -896,7 +628,7 @@
 				interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -907,7 +639,7 @@
 				interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -918,7 +650,7 @@
 				interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -934,7 +666,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				status = "disabled";
 			};
 
@@ -949,7 +681,7 @@
 				#size-cells = <0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_i2c1>;
-				clocks = <&twi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				status = "disabled";
 			};
 
@@ -964,7 +696,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -980,7 +712,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -1009,7 +741,7 @@
 				reg = <0xf8034000 0x300>;
 				interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
 				#pwm-cells = <3>;
-				clocks = <&pwm_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 				status = "disabled";
 			};
 
@@ -1017,7 +749,7 @@
 				compatible = "atmel,at91sam9260-udc";
 				reg = <0xf803c000 0x4000>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
-				clocks = <&udphs_clk>, <&udpck>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 7>;
 				clock-names = "pclk", "hclk";
 				status = "disabled";
 			};
@@ -1027,7 +759,7 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x00100000>;
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
@@ -1045,7 +777,7 @@
 				  0x3 0x0 0x40000000 0x10000000
 				  0x4 0x0 0x50000000 0x10000000
 				  0x5 0x0 0x60000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			status = "disabled";
 
 			nand_controller: nand-controller {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index d36e162a8817..870b83ff6b97 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -59,7 +59,7 @@
 				wm8904: codec@1a {
 					compatible = "wlf,wm8904";
 					reg = <0x1a>;
-					clocks = <&pck0>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
 					clock-names = "mclk";
 				};
 
diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index e26ea9006378..c7f1d97e69bb 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -56,6 +56,16 @@
 			  3300000 0x0>;
 		status = "okay";
 	};
+
+	sd_vcc_reg: sd_vcc_reg {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &firmware {
@@ -69,7 +79,7 @@
 				  "GLOBAL_RESET",
 				  "VDD_SD_IO_SEL",
 				  "CAM_GPIO",
-				  "",
+				  "SD_PWR_ON",
 				  "";
 		status = "okay";
 	};
@@ -174,6 +184,7 @@
 /* EMMC2 is used to drive the SD card */
 &emmc2 {
 	vqmmc-supply = <&sd_io_1v8_reg>;
+	vmmc-supply = <&sd_vcc_reg>;
 	broken-cd;
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/bcm2835-common.dtsi b/arch/arm/boot/dts/bcm2835-common.dtsi
index 2b1d9d4c0cde..4119271c979d 100644
--- a/arch/arm/boot/dts/bcm2835-common.dtsi
+++ b/arch/arm/boot/dts/bcm2835-common.dtsi
@@ -130,7 +130,6 @@
 			compatible = "brcm,bcm2835-v3d";
 			reg = <0x7ec00000 0x1000>;
 			interrupts = <1 10>;
-			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
 		};
 
 		vc4: gpu {
diff --git a/arch/arm/boot/dts/bcm2835-rpi-common.dtsi b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
new file mode 100644
index 000000000000..8a55b6cded59
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2835-rpi-common.dtsi
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
+ * firmware interface.
+ */
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index 53bf4579cc22..0549686134ea 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";
diff --git a/arch/arm/boot/dts/bcm2836.dtsi b/arch/arm/boot/dts/bcm2836.dtsi
index 82d6c4662ae4..b390006aef79 100644
--- a/arch/arm/boot/dts/bcm2836.dtsi
+++ b/arch/arm/boot/dts/bcm2836.dtsi
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2836";
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
index 9e95fee78e19..0199ec98cd61 100644
--- a/arch/arm/boot/dts/bcm2837.dtsi
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -1,5 +1,6 @@
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2837";
diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index d2f7d984bba5..3ab3cd250da7 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -77,7 +77,7 @@
 
 		ranges = <0 0xf7000000 0x1000000>;
 
-		sdhci0: sdhci@ab0000 {
+		sdhci0: mmc@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
 			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
@@ -86,7 +86,7 @@
 			status = "disabled";
 		};
 
-		sdhci1: sdhci@ab0800 {
+		sdhci1: mmc@ab0800 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0800 0x200>;
 			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO1>;
@@ -95,7 +95,7 @@
 			status = "disabled";
 		};
 
-		sdhci2: sdhci@ab1000 {
+		sdhci2: mmc@ab1000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab1000 0x200>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index e5c1f4213ff9..7cf3e6302d75 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -62,7 +62,7 @@
 
 		ranges = <0 0xf7000000 0x1000000>;
 
-		sdhci0: sdhci@ab0000 {
+		sdhci0: mmc@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
 			clocks = <&chip_clk CLKID_SDIO0XIN>, <&chip_clk CLKID_SDIO0>;
diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 99d6872a6dfc..c44a32e873f4 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -122,7 +122,7 @@
 		ranges = <0 0xf7000000 0x1000000>;
 		interrupt-parent = <&gic>;
 
-		sdhci0: sdhci@ab0000 {
+		sdhci0: mmc@ab0000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0000 0x200>;
 			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
@@ -131,7 +131,7 @@
 			status = "disabled";
 		};
 
-		sdhci1: sdhci@ab0800 {
+		sdhci1: mmc@ab0800 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab0800 0x200>;
 			clocks = <&chip_clk CLKID_SDIO1XIN>, <&chip_clk CLKID_SDIO>;
@@ -140,7 +140,7 @@
 			status = "disabled";
 		};
 
-		sdhci2: sdhci@ab1000 {
+		sdhci2: mmc@ab1000 {
 			compatible = "mrvl,pxav3-mmc";
 			reg = <0xab1000 0x200>;
 			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi
index 3081b04e8c08..89e0bdaf3a85 100644
--- a/arch/arm/boot/dts/dove.dtsi
+++ b/arch/arm/boot/dts/dove.dtsi
@@ -175,7 +175,6 @@
 				#size-cells = <0>;
 				interrupts = <11>;
 				clock-frequency = <400000>;
-				timeout-ms = <1000>;
 				clocks = <&core_clk 0>;
 				status = "okay";
 			};
@@ -248,7 +247,7 @@
 				marvell,#interrupts = <5>;
 			};
 
-			intc: main-interrupt-ctrl@20200 {
+			intc: interrupt-controller@20200 {
 				compatible = "marvell,orion-intc";
 				interrupt-controller;
 				#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/dra7-evm-common.dtsi b/arch/arm/boot/dts/dra7-evm-common.dtsi
index 23244b5a9942..f89a64cbcd53 100644
--- a/arch/arm/boot/dts/dra7-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra7-evm-common.dtsi
@@ -3,6 +3,7 @@
  * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
  */
 
+#include "dra74-ipu-dsp-common.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/ti-dra7-atl.h>
 #include <dt-bindings/input/input.h>
diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
index af06a55d1c5c..7aeb30daf3b8 100644
--- a/arch/arm/boot/dts/dra7-evm.dts
+++ b/arch/arm/boot/dts/dra7-evm.dts
@@ -35,6 +35,40 @@
 		regulator-max-microvolt = <1800000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_memory_region: dsp2-memory@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
 	evm_3v3_sd: fixedregulator-sd {
 		compatible = "regulator-fixed";
 		regulator-name = "evm_3v3_sd";
@@ -537,3 +571,23 @@
 	pinctrl-1 = <&dcan1_pins_sleep>;
 	pinctrl-2 = <&dcan1_pins_default>;
 };
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_memory_region>;
+};
diff --git a/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
new file mode 100644
index 000000000000..a25749a1c365
--- /dev/null
+++ b/arch/arm/boot/dts/dra7-ipu-dsp-common.dtsi
@@ -0,0 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common IPU and DSP data for TI DRA7xx/AM57xx platforms
+ */
+
+&mailbox5 {
+	status = "okay";
+	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
+		status = "okay";
+	};
+	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
+		status = "okay";
+	};
+};
+
+&mailbox6 {
+	status = "okay";
+	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
+		status = "okay";
+	};
+};
+
+&ipu2 {
+	mboxes = <&mailbox6 &mbox_ipu2_ipc3x>;
+	ti,timers = <&timer3>;
+	ti,watchdog-timers = <&timer4>, <&timer9>;
+};
+
+&ipu1 {
+	mboxes = <&mailbox5 &mbox_ipu1_ipc3x>;
+	ti,timers = <&timer11>;
+	ti,watchdog-timers = <&timer7>, <&timer8>;
+};
+
+&dsp1 {
+	mboxes = <&mailbox5 &mbox_dsp1_ipc3x>;
+	ti,timers = <&timer5>;
+	ti,watchdog-timers = <&timer10>;
+};
diff --git a/arch/arm/boot/dts/dra7-l4.dtsi b/arch/arm/boot/dts/dra7-l4.dtsi
index fc728c606eef..62ca89551219 100644
--- a/arch/arm/boot/dts/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/dra7-l4.dtsi
@@ -1162,8 +1162,8 @@
 			timer2: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER2_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1189,8 +1189,8 @@
 			timer3: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER3_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1207,8 +1207,9 @@
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
 			/* Domains (P, C): l4per_pwrdm, l4per_clkdm */
-			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 0>,
+				 <&timer_sys_clk_div>;
+			clock-names = "fck", "timer_sys_ck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x36000 0x1000>;
@@ -1216,8 +1217,8 @@
 			timer4: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER4_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1243,8 +1244,8 @@
 			timer9: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER9_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1850,8 +1851,8 @@
 			timer10: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER10_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -1877,8 +1878,8 @@
 			timer11: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per_clkctrl DRA7_L4PER_TIMER11_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -3351,8 +3352,8 @@
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
 			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
-			clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&ipu_clkctrl DRA7_IPU_TIMER5_CLKCTRL 0>, <&timer_sys_clk_div>;
+			clock-names = "fck", "timer_sys_ck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x20000 0x1000>;
@@ -3378,8 +3379,9 @@
 					<SYSC_IDLE_SMART>,
 					<SYSC_IDLE_SMART_WKUP>;
 			/* Domains (P, C): ipu_pwrdm, ipu_clkdm */
-			clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>;
-			clock-names = "fck";
+			clocks = <&ipu_clkctrl DRA7_IPU_TIMER6_CLKCTRL 0>,
+				 <&timer_sys_clk_div>;
+			clock-names = "fck", "timer_sys_ck";
 			#address-cells = <1>;
 			#size-cells = <1>;
 			ranges = <0x0 0x22000 0x1000>;
@@ -3414,8 +3416,8 @@
 			timer7: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&ipu_clkctrl DRA7_IPU_TIMER7_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -3441,8 +3443,8 @@
 			timer8: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&ipu_clkctrl DRA7_IPU_TIMER8_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
@@ -3468,8 +3470,8 @@
 			timer13: timer@0 {
 				compatible = "ti,omap5430-timer";
 				reg = <0x0 0x80>;
-				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>;
-				clock-names = "fck";
+				clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER13_CLKCTRL 24>, <&timer_sys_clk_div>;
+				clock-names = "fck", "timer_sys_ck";
 				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
 				ti,timer-pwm;
 			};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 15225a39b28c..099546be5014 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -410,6 +410,42 @@
 			ti,hwmods = "dmm";
 		};
 
+		ipu1: ipu@58820000 {
+			compatible = "ti,dra7-ipu";
+			reg = <0x58820000 0x10000>;
+			reg-names = "l2ram";
+			iommus = <&mmu_ipu1>;
+			status = "disabled";
+			resets = <&prm_ipu 0>, <&prm_ipu 1>;
+			clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
+			firmware-name = "dra7-ipu1-fw.xem4";
+		};
+
+		ipu2: ipu@55020000 {
+			compatible = "ti,dra7-ipu";
+			reg = <0x55020000 0x10000>;
+			reg-names = "l2ram";
+			iommus = <&mmu_ipu2>;
+			status = "disabled";
+			resets = <&prm_core 0>, <&prm_core 1>;
+			clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
+			firmware-name = "dra7-ipu2-fw.xem4";
+		};
+
+		dsp1: dsp@40800000 {
+			compatible = "ti,dra7-dsp";
+			reg = <0x40800000 0x48000>,
+			      <0x40e00000 0x8000>,
+			      <0x40f00000 0x8000>;
+			reg-names = "l2ram", "l1pram", "l1dram";
+			ti,bootreg = <&scm_conf 0x55c 10>;
+			iommus = <&mmu0_dsp1>, <&mmu1_dsp1>;
+			status = "disabled";
+			resets = <&prm_dsp1 0>;
+			clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
+			firmware-name = "dra7-dsp1-fw.xe66";
+		};
+
 		target-module@40d01000 {
 			compatible = "ti,sysc-omap2", "ti,sysc";
 			reg = <0x40d01000 0x4>,
diff --git a/arch/arm/boot/dts/dra71-evm.dts b/arch/arm/boot/dts/dra71-evm.dts
index fabeb7704753..a5d275ea7bd3 100644
--- a/arch/arm/boot/dts/dra71-evm.dts
+++ b/arch/arm/boot/dts/dra71-evm.dts
@@ -17,6 +17,33 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
 	vpo_sd_1v8_3v3: gpio-regulator-TPS74801 {
 		compatible = "regulator-gpio";
 
@@ -270,3 +297,18 @@
 &extcon_usb2 {
 	vbus-gpio = <&pcf_lcd 15 GPIO_ACTIVE_HIGH>;
 };
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index 01558a86af82..c84b63bf0fc8 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -5,6 +5,7 @@
 /dts-v1/;
 
 #include "dra72x.dtsi"
+#include "dra7-ipu-dsp-common.dtsi"
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/ti-dra7-atl.h>
 
@@ -583,23 +584,6 @@
 	rx-num-evt = <32>;
 };
 
-&mailbox5 {
-	status = "okay";
-	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
-		status = "okay";
-	};
-	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
-		status = "okay";
-	};
-};
-
-&mailbox6 {
-	status = "okay";
-	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
-		status = "okay";
-	};
-};
-
 &pcie1_rc {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/dra72-evm-revc.dts b/arch/arm/boot/dts/dra72-evm-revc.dts
index 2bb2e8be6276..6e70858f6313 100644
--- a/arch/arm/boot/dts/dra72-evm-revc.dts
+++ b/arch/arm/boot/dts/dra72-evm-revc.dts
@@ -14,6 +14,33 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>; /* 2GB */
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_cma_pool: ipu2_cma@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_cma_pool: dsp1_cma@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_cma_pool: ipu1_cma@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
 	evm_1v8_sw: fixedregulator-evm_1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "evm_1v8";
@@ -113,3 +140,18 @@
 	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev20_conf>;
 	vmmc-supply = <&evm_1v8_sw>;
 };
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_cma_pool>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_cma_pool>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_cma_pool>;
+};
diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts
index 9adb77585ef1..951152fe206a 100644
--- a/arch/arm/boot/dts/dra72-evm.dts
+++ b/arch/arm/boot/dts/dra72-evm.dts
@@ -12,6 +12,33 @@
 		reg = <0x0 0x80000000 0x0 0x40000000>; /* 1024 MB */
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_memory_region: ipu2-memory@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_memory_region: dsp1-memory@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_memory_region: ipu1-memory@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
 	evm_1v8_sw: fixedregulator-evm_1v8 {
 		compatible = "regulator-fixed";
 		regulator-name = "evm_1v8";
@@ -78,3 +105,18 @@
 	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_rev10_conf>;
 	vmmc-supply = <&evm_1v8_sw>;
 };
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_memory_region>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_memory_region>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_memory_region>;
+};
diff --git a/arch/arm/boot/dts/dra72x.dtsi b/arch/arm/boot/dts/dra72x.dtsi
index da334489b18f..ae23ec14e8fa 100644
--- a/arch/arm/boot/dts/dra72x.dtsi
+++ b/arch/arm/boot/dts/dra72x.dtsi
@@ -10,6 +10,12 @@
 / {
 	compatible = "ti,dra722", "ti,dra72", "ti,dra7";
 
+	aliases {
+		rproc0 = &ipu1;
+		rproc1 = &ipu2;
+		rproc2 = &dsp1;
+	};
+
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
 		interrupt-parent = <&wakeupgen>;
diff --git a/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
new file mode 100644
index 000000000000..b1147a4b77f9
--- /dev/null
+++ b/arch/arm/boot/dts/dra74-ipu-dsp-common.dtsi
@@ -0,0 +1,18 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common IPU and DSP data for TI DRA74x/DRA76x/AM572x/AM574x platforms
+ */
+
+#include "dra7-ipu-dsp-common.dtsi"
+
+&mailbox6 {
+	mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
+		status = "okay";
+	};
+};
+
+&dsp2 {
+	mboxes = <&mailbox6 &mbox_dsp2_ipc3x>;
+	ti,timers = <&timer6>;
+	ti,watchdog-timers = <&timer13>;
+};
diff --git a/arch/arm/boot/dts/dra74x.dtsi b/arch/arm/boot/dts/dra74x.dtsi
index 7b1c61298253..46d8e7615180 100644
--- a/arch/arm/boot/dts/dra74x.dtsi
+++ b/arch/arm/boot/dts/dra74x.dtsi
@@ -29,6 +29,13 @@
 		};
 	};
 
+	aliases {
+		rproc0 = &ipu1;
+		rproc1 = &ipu2;
+		rproc2 = &dsp1;
+		rproc3 = &dsp2;
+	};
+
 	pmu {
 		compatible = "arm,cortex-a15-pmu";
 		interrupt-parent = <&wakeupgen>;
@@ -124,6 +131,20 @@
 				ti,syscon-mmuconfig = <&dsp2_system 0x1>;
 			};
 		};
+
+		dsp2: dsp@41000000 {
+			compatible = "ti,dra7-dsp";
+			reg = <0x41000000 0x48000>,
+			      <0x41600000 0x8000>,
+			      <0x41700000 0x8000>;
+			reg-names = "l2ram", "l1pram", "l1dram";
+			ti,bootreg = <&scm_conf 0x560 10>;
+			iommus = <&mmu0_dsp2>, <&mmu1_dsp2>;
+			status = "disabled";
+			resets = <&prm_dsp2 0>;
+			clocks = <&dsp2_clkctrl DRA7_DSP2_MMU0_DSP2_CLKCTRL 0>;
+			firmware-name = "dra7-dsp2-fw.xe66";
+		};
 	};
 };
 
diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index e958cb3d1b31..820a0ece20d4 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -25,6 +25,40 @@
 		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		ipu2_cma_pool: ipu2_cma@95800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x95800000 0x0 0x3800000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp1_cma_pool: dsp1_cma@99000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x99000000 0x0 0x4000000>;
+			reusable;
+			status = "okay";
+		};
+
+		ipu1_cma_pool: ipu1_cma@9d000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9d000000 0x0 0x2000000>;
+			reusable;
+			status = "okay";
+		};
+
+		dsp2_cma_pool: dsp2_cma@9f000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x9f000000 0x0 0x800000>;
+			reusable;
+			status = "okay";
+		};
+	};
+
 	vsys_12v0: fixedregulator-vsys12v0 {
 		/* main supply */
 		compatible = "regulator-fixed";
@@ -548,3 +582,23 @@
 		data-lanes = <1 2>;
 	};
 };
+
+&ipu2 {
+	status = "okay";
+	memory-region = <&ipu2_cma_pool>;
+};
+
+&ipu1 {
+	status = "okay";
+	memory-region = <&ipu1_cma_pool>;
+};
+
+&dsp1 {
+	status = "okay";
+	memory-region = <&dsp1_cma_pool>;
+};
+
+&dsp2 {
+	status = "okay";
+	memory-region = <&dsp2_cma_pool>;
+};
diff --git a/arch/arm/boot/dts/e60k02.dtsi b/arch/arm/boot/dts/e60k02.dtsi
index ce50c4dc6f2a..3af1ab4458ef 100644
--- a/arch/arm/boot/dts/e60k02.dtsi
+++ b/arch/arm/boot/dts/e60k02.dtsi
@@ -117,6 +117,8 @@
 	ricoh619: pmic@32 {
 		compatible = "ricoh,rc5t619";
 		reg = <0x32>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
 		system-power-controller;
 
 		regulators {
diff --git a/arch/arm/boot/dts/exynos3250-monk.dts b/arch/arm/boot/dts/exynos3250-monk.dts
index 248bd372fe70..ca29d7ed8216 100644
--- a/arch/arm/boot/dts/exynos3250-monk.dts
+++ b/arch/arm/boot/dts/exynos3250-monk.dts
@@ -57,7 +57,8 @@
 
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/exynos3250-rinato.dts b/arch/arm/boot/dts/exynos3250-rinato.dts
index 86c26a4edfd7..aba8350cfdaf 100644
--- a/arch/arm/boot/dts/exynos3250-rinato.dts
+++ b/arch/arm/boot/dts/exynos3250-rinato.dts
@@ -50,9 +50,15 @@
 		};
 	};
 
+	wlan_pwrseq: mshc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
+	};
+
 	i2c_max77836: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpd0 2 GPIO_ACTIVE_HIGH>, <&gpd0 3 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpd0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd0 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -605,8 +611,6 @@
 };
 
 &mshc_0 {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	broken-cd;
 	non-removable;
 	cap-mmc-highspeed;
@@ -625,10 +629,48 @@
 	status = "okay";
 };
 
+&mshc_1 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	samsung,dw-mshc-ciu-div = <1>;
+	samsung,dw-mshc-sdr-timing = <0 1>;
+	samsung,dw-mshc-ddr-timing = <1 2>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus1 &sd1_bus4>;
+	bus-width = <4>;
+
+	mmc-pwrseq = <&wlan_pwrseq>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4334-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
 &serial_0 {
 	assigned-clocks = <&cmu CLK_SCLK_UART0>;
 	assigned-clock-rates = <100000000>;
 	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpe0 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+		clocks = <&s2mps14_osc S2MPS11_CLK_BT>;
+	};
 };
 
 &serial_1 {
diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
new file mode 100644
index 000000000000..6d0c04d77a39
--- /dev/null
+++ b/arch/arm/boot/dts/exynos4210-i9100.dts
@@ -0,0 +1,768 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Samsung's Exynos4210 based Galaxy S2 (GT-I9100 version) device tree
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2020 Stenkin Evgeniy <stenkinevgeniy@gmail.com>
+ * Copyright (c) 2020 Paul Cercueil <paul@crapouillou.net>
+ */
+
+/dts-v1/;
+#include "exynos4210.dtsi"
+#include "exynos4412-ppmu-common.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/linux-event-codes.h>
+
+/ {
+	model = "Samsung Galaxy S2 (GT-I9100)";
+	compatible = "samsung,i9100", "samsung,exynos4210", "samsung,exynos4";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x40000000 0x40000000>;
+	};
+
+	chosen {
+		stdout-path = "serial2:115200n8";
+	};
+
+	vemmc_reg: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "VMEM_VDD_2.8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	tsp_reg: regulator-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "TSP_FIXED_VOLTAGES";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpl0 3 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	cam_af_28v_reg: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_AF_2.8V_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpk1 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_io_en_reg: regulator-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "CAM_IO_EN";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpe2 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	cam_io_12v_reg: regulator-4 {
+		compatible = "regulator-fixed";
+		regulator-name = "8M_1.2V_EN";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		gpio = <&gpe2 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vt_core_15v_reg: regulator-5 {
+		compatible = "regulator-fixed";
+		regulator-name = "VT_CORE_1.5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&gpe2 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		vol-down {
+			gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			label = "volume down";
+			debounce-interval = <10>;
+		};
+
+		vol-up {
+			gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			label = "volume up";
+			debounce-interval = <10>;
+		};
+
+		power {
+			gpios = <&gpx2 7 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			label = "power";
+			debounce-interval = <10>;
+			wakeup-source;
+		};
+
+		ok {
+			gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_OK>;
+			label = "ok";
+			debounce-interval = <10>;
+		};
+	};
+
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
+	};
+
+	i2c_max17042_fuel: i2c-gpio {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sda-gpios = <&gpy4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy4 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <5>;
+
+		battery@36 {
+			compatible = "maxim,max17042";
+
+			interrupt-parent = <&gpx2>;
+			interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-0 = <&max17042_fuel_irq>;
+			pinctrl-names = "default";
+
+			reg = <0x36>;
+			maxim,over-heat-temp = <700>;
+			maxim,over-volt = <4500>;
+		};
+	};
+
+	spi-lcd {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		num-chipselects = <1>;
+		cs-gpios = <&gpy4 3 GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpy3 1 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpy3 3 GPIO_ACTIVE_HIGH>;
+
+		lcd@0 {
+			compatible = "samsung,ld9040";
+			reg = <0>;
+
+			spi-max-frequency = <1200000>;
+
+			vdd3-supply = <&vmipi_reg>;
+			vci-supply = <&vcclcd_reg>;
+
+			reset-gpios = <&gpy4 5 GPIO_ACTIVE_HIGH>;
+			power-on-delay = <10>;
+			reset-delay = <10>;
+
+			panel-width-mm = <90>;
+			panel-height-mm = <154>;
+
+			display-timings {
+				timing {
+					clock-frequency = <23492370>;
+					hactive = <480>;
+					vactive = <800>;
+					hback-porch = <16>;
+					hfront-porch = <16>;
+					vback-porch = <2>;
+					vfront-porch = <28>;
+					hsync-len = <2>;
+					vsync-len = <1>;
+					hsync-active = <0>;
+					vsync-active = <0>;
+					de-active = <0>;
+					pixelclk-active = <0>;
+				};
+			};
+
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_dpi_ep>;
+				};
+			};
+		};
+	};
+
+	fixed-rate-clocks {
+		xxti {
+			compatible = "samsung,clock-xxti";
+			clock-frequency = <0>;
+		};
+
+		xusbxti {
+			compatible = "samsung,clock-xusbxti";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			cooling-maps {
+				map0 {
+					/* Corresponds to 800MHz */
+					cooling-device = <&cpu0 2 2>;
+				};
+				map1 {
+					/* Corresponds to 200MHz */
+					cooling-device = <&cpu0 4 4>;
+				};
+			};
+		};
+	};
+};
+
+&camera {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu0-supply = <&varm_breg>;
+};
+
+&ehci {
+	status = "okay";
+
+	phys = <&exynos_usbphy 1>;
+	phy-names = "host";
+};
+
+&exynos_usbphy {
+	status = "okay";
+
+	vbus-supply = <&safe1_sreg>;
+};
+
+&fimc_0 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC0>, <&clock CLK_SCLK_FIMC0>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_1 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC1>, <&clock CLK_SCLK_FIMC1>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_2 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC2>, <&clock CLK_SCLK_FIMC2>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimc_3 {
+	status = "okay";
+
+	assigned-clocks = <&clock CLK_MOUT_FIMC3>, <&clock CLK_SCLK_FIMC3>;
+	assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+	assigned-clock-rates = <0>, <160000000>;
+};
+
+&fimd {
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	samsung,invert-vden;
+	samsung,invert-vclk;
+
+	pinctrl-0 = <&lcd_clk>, <&lcd_data24>;
+	pinctrl-names = "default";
+
+	port@3 {
+		reg = <3>;
+
+		fimd_dpi_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+
+	mali-supply = <&vg3d_breg>;
+	regulator-microvolt-offset = <50000>;
+	regulator-microsecs-delay = <50>;
+};
+
+&hsotg {
+	status = "okay";
+
+	dr_mode = "otg";
+	vusb_d-supply = <&vusb_reg>;
+	vusb_a-supply = <&vusbdac_reg>;
+};
+
+&i2c_3 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	pinctrl-0 = <&i2c3_bus>;
+	pinctrl-names = "default";
+
+	mxt224-touchscreen@4a {
+		compatible = "atmel,maxtouch";
+		reg = <0x4a>;
+
+		interrupt-parent = <&gpx0>;
+		interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
+&i2c_5 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <100000>;
+
+	pinctrl-0 = <&i2c5_bus>;
+	pinctrl-names = "default";
+
+	max8997_pmic@66 {
+		compatible = "maxim,max8997-pmic";
+		reg = <0x66>;
+
+		interrupts-extended = <&gpx0 7 IRQ_TYPE_NONE>,
+				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
+
+		max8997,pmic-buck1-uses-gpio-dvs;
+		max8997,pmic-buck2-uses-gpio-dvs;
+		max8997,pmic-buck5-uses-gpio-dvs;
+
+		max8997,pmic-ignore-gpiodvs-side-effect;
+		max8997,pmic-buck125-default-dvs-idx = <0>;
+
+		max8997,pmic-buck125-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>,
+						 <&gpx0 6 GPIO_ACTIVE_HIGH>,
+						 <&gpl0 0 GPIO_ACTIVE_HIGH>;
+
+		max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
+						 <1250000>, <1200000>,
+						 <1150000>, <1100000>,
+						 <1000000>, <950000>;
+
+		max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>,
+						 <950000>,  <900000>,
+						 <1100000>, <1000000>,
+						 <950000>,  <900000>;
+
+		max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>,
+						 <1200000>, <1200000>;
+
+		pinctrl-0 = <&max8997_irq>, <&otg_gp>, <&usb_sel>;
+		pinctrl-names = "default";
+
+		regulators {
+			vadc_reg: LDO1 {
+				regulator-name = "VADC_3.3V_C210";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+
+			};
+			valive_reg: LDO2 {
+				regulator-name = "VALIVE_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+
+			};
+
+			vusb_reg: LDO3 {
+				regulator-name = "VUSB_1.1V_C210";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+			};
+
+			vmipi_reg: LDO4 {
+				regulator-name = "VMIPI_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vhsic_reg: LDO5 {
+				regulator-name = "VHSIC_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vpda_reg: LDO6 {
+				regulator-name = "VCC_1.8V_PDA";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+			};
+
+			vcam_reg: LDO7 {
+				regulator-name = "CAM_ISP_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vusbdac_reg: LDO8 {
+				regulator-name = "VUSB+VDAC_3.3V_C210";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vccpda_reg: LDO9 {
+				regulator-name = "VCC_2.8V_PDA";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vtouch_reg: LDO11 {
+				regulator-name = "TOUCH_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-always-on;
+			};
+
+			vpll_reg: LDO10 {
+				regulator-name = "VPLL_1.1V";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+			};
+
+			vtcam_reg: LDO12 {
+				regulator-name = "VT_CAM_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vcclcd_reg: LDO13 {
+				regulator-name = "VCC_3.0V_LCD";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3000000>;
+			};
+
+			vmotor_reg: LDO14 {
+				regulator-name = "VCC_2.8V_MOTOR";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vled_reg: LDO15 {
+				regulator-name = "LED_A_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			camsensor_reg: LDO16 {
+				regulator-name = "CAM_SENSOR_IO_1.8V";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+			};
+
+			vtf_reg: LDO17 {
+				regulator-name = "VTF_2.8V";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+			};
+
+			vtouchled_reg: LDO18 {
+				regulator-name = "TOUCH_LED_3.3V";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			vddq_reg: LDO21 {
+				regulator-name = "VDDQ_M1M2_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			varm_breg: BUCK1 {
+				regulator-name = "VARM_1.2V_C210";
+				regulator-min-microvolt = <65000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-always-on;
+			};
+
+			vint_breg: BUCK2 {
+				regulator-name = "VINT_1.1V_C210";
+				regulator-min-microvolt = <65000>;
+				regulator-max-microvolt = <2225000>;
+				regulator-always-on;
+			};
+
+			vg3d_breg: BUCK3 {
+				regulator-name = "G3D_1.1V";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			camisp_breg: BUCK4 {
+				regulator-name = "CAM_ISP_CORE_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+			};
+
+			vmem_breg: BUCK5 {
+				regulator-name = "VMEM_1.2V";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+			};
+
+			vccsub_breg: BUCK7 {
+				regulator-name = "VCC_SUB_2.0V";
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+				regulator-always-on;
+			};
+
+			safe1_sreg: ESAFEOUT1 {
+				regulator-name = "SAFEOUT1";
+			};
+
+			safe2_sreg: ESAFEOUT2 {
+				regulator-name = "SAFEOUT2";
+				regulator-boot-on;
+			};
+
+			charger_reg: CHARGER {
+				regulator-name = "CHARGER";
+				regulator-min-microamp = <60000>;
+				regulator-max-microamp = <2580000>;
+				regulator-always-on;
+			};
+
+			chargercv_reg: CHARGER_CV {
+				regulator-name = "CHARGER_CV";
+				regulator-min-microvolt = <3800000>;
+				regulator-max-microvolt = <4100000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&i2c_7 {
+	status = "okay";
+
+	samsung,i2c-sda-delay = <100>;
+	samsung,i2c-slave-addr = <0x10>;
+	samsung,i2c-max-bus-freq = <400000>;
+
+	pinctrl-0 = <&i2c7_bus>;
+	pinctrl-names = "default";
+
+	ak8975@c {
+		compatible = "asahi-kasei,ak8975";
+		reg = <0x0c>;
+
+		gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&pinctrl_0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep0>;
+
+	sleep0: sleep-states {
+		gpa0-0 {
+			samsung,pins = "gpa0-0";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-1 {
+			samsung,pins = "gpa0-1";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT0>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-2 {
+			samsung,pins = "gpa0-2";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_INPUT>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+
+		gpa0-3 {
+			samsung,pins = "gpa0-3";
+			samsung,pin-con-pdn = <EXYNOS_PIN_PDN_OUT1>;
+			samsung,pin-pud-pdn = <EXYNOS_PIN_PULL_NONE>;
+		};
+	};
+};
+
+&pinctrl_1 {
+	mhl_int: mhl-int {
+		samsung,pins = "gpf3-5";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	i2c_mhl_bus: i2c-mhl-bus {
+		samsung,pins = "gpf0-4", "gpf0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	usb_sel: usb-sel {
+		samsung,pins = "gpl0-6";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	bt_en: bt-en {
+		samsung,pins = "gpl0-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-val = <0>;
+	};
+
+	bt_res: bt-res {
+		samsung,pins = "gpl1-0";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV4>;
+		samsung,pin-val = <0>;
+	};
+
+	otg_gp: otg-gp {
+		samsung,pins = "gpx3-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	mag_mhl_gpio: mag-mhl-gpio {
+		samsung,pins = "gpd0-2";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max8997_irq: max8997-irq {
+		samsung,pins = "gpx0-7";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	max17042_fuel_irq: max17042-fuel-irq {
+		samsung,pins = "gpx2-3";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
+
+	tsp224_irq: tsp224-irq {
+		samsung,pins = "gpx0-4";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+	};
+};
+
+&sdhci_0 {
+	status = "okay";
+
+	bus-width = <8>;
+	non-removable;
+	vmmc-supply = <&vemmc_reg>;
+
+	pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_bus8>;
+	pinctrl-names = "default";
+};
+
+&sdhci_2 {
+	status = "okay";
+
+	bus-width = <4>;
+	cd-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&vtf_reg>;
+
+	pinctrl-0 = <&sd2_clk>, <&sd2_cmd>, <&sd2_bus4>;
+	pinctrl-names = "default";
+};
+
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&vtf_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
+&serial_0 {
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&bt_en>, <&bt_res>, <&uart0_data>, <&uart0_fctl>;
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+
+		shutdown-gpios = <&gpl0 4 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&gpl1 0 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpx3 1 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&serial_1 {
+	status = "okay";
+};
+
+&serial_2 {
+	status = "okay";
+};
+
+&serial_3 {
+	status = "okay";
+};
+
+&tmu {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts
index 0d1e1a9c2f6e..890525b10d22 100644
--- a/arch/arm/boot/dts/exynos4210-origen.dts
+++ b/arch/arm/boot/dts/exynos4210-origen.dts
@@ -251,12 +251,7 @@
 			};
 
 			buck1_reg: BUCK1 {
-				/*
-				* HACK: The real name is VDD_ARM_1.2V,
-				* but exynos-cpufreq does not support
-				* DT-based regulator lookup yet.
-				*/
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM_1.2V";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt	= <1350000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts
index 7c39dd1c4d3a..3d791db6095c 100644
--- a/arch/arm/boot/dts/exynos4210-trats.dts
+++ b/arch/arm/boot/dts/exynos4210-trats.dts
@@ -121,6 +121,11 @@
 		};
 	};
 
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpl1 2 GPIO_ACTIVE_LOW>;
+	};
+
 	fixed-rate-clocks {
 		xxti {
 			compatible = "samsung,clock-xxti";
@@ -280,11 +285,10 @@
 
 	max8997_pmic@66 {
 		compatible = "maxim,max8997-pmic";
-		interrupts-extended = <&gpx0 7 0>, <&gpx2 3 0>;
 
 		reg = <0x66>;
-		interrupt-parent = <&gpx0>;
-		interrupts = <7 IRQ_TYPE_NONE>;
+		interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>,
+				      <&gpx2 3 IRQ_TYPE_EDGE_FALLING>;
 
 		max8997,pmic-buck1-uses-gpio-dvs;
 		max8997,pmic-buck2-uses-gpio-dvs;
@@ -403,12 +407,7 @@
 			};
 
 			varm_breg: BUCK1 {
-			     /*
-			      * HACK: The real name is VARM_1.2V_C210,
-			      * but exynos-cpufreq does not support
-			      * DT-based regulator lookup yet.
-			      */
-			     regulator-name = "vdd_arm";
+			     regulator-name = "VARM_1.2V_C210";
 			     regulator-min-microvolt = <900000>;
 			     regulator-max-microvolt = <1350000>;
 			     regulator-always-on;
@@ -471,6 +470,30 @@
 	status = "okay";
 };
 
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&tflash_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
 &serial_0 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/exynos4210-universal_c210.dts b/arch/arm/boot/dts/exynos4210-universal_c210.dts
index 9dda6bdb9253..02fde1a75ebd 100644
--- a/arch/arm/boot/dts/exynos4210-universal_c210.dts
+++ b/arch/arm/boot/dts/exynos4210-universal_c210.dts
@@ -50,6 +50,11 @@
 		enable-active-high;
 	};
 
+	wlan_pwrseq: sdhci3-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpe3 1 GPIO_ACTIVE_LOW>;
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
@@ -164,7 +169,8 @@
 
 	hdmi_ddc: i2c-ddc {
 		compatible = "i2c-gpio";
-		gpios = <&gpe4 2 GPIO_ACTIVE_HIGH &gpe4 3 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpe4 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpe4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -317,7 +323,7 @@
 		max8952,sync-freq = <0>;
 		max8952,ramp-speed = <0>;
 
-		regulator-name = "vdd_arm";
+		regulator-name = "VARM_1.2V_C210";
 		regulator-min-microvolt = <770000>;
 		regulator-max-microvolt = <1400000>;
 		regulator-always-on;
@@ -563,6 +569,29 @@
 	status = "okay";
 };
 
+&sdhci_3 {
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	non-removable;
+	bus-width = <4>;
+	mmc-pwrseq = <&wlan_pwrseq>;
+	vmmc-supply = <&ldo5_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&sd3_clk>, <&sd3_cmd>, <&sd3_bus4>;
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4330-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpx2>;
+		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+	};
+};
+
 &serial_0 {
 	status = "okay";
 	/delete-property/dmas;
diff --git a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
index 44f97546dd0a..53b3ca3effab 100644
--- a/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
+++ b/arch/arm/boot/dts/exynos4412-galaxy-s3.dtsi
@@ -53,7 +53,8 @@
 
 	i2c_ak8975: i2c-gpio-0 {
 		compatible = "i2c-gpio";
-		gpios = <&gpy2 4 GPIO_ACTIVE_HIGH>, <&gpy2 5 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpy2 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpy2 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -68,7 +69,8 @@
 
 	i2c_cm36651: i2c-gpio-2 {
 		compatible = "i2c-gpio";
-		gpios = <&gpf0 0 GPIO_ACTIVE_LOW>, <&gpf0 1 GPIO_ACTIVE_LOW>;
+		sda-gpios = <&gpf0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos4412-midas.dtsi b/arch/arm/boot/dts/exynos4412-midas.dtsi
index 3023bc3b68ce..2c8111c6b065 100644
--- a/arch/arm/boot/dts/exynos4412-midas.dtsi
+++ b/arch/arm/boot/dts/exynos4412-midas.dtsi
@@ -140,7 +140,8 @@
 
 	i2c_max77693: i2c-gpio-1 {
 		compatible = "i2c-gpio";
-		gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpm2 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpm2 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -188,7 +189,8 @@
 
 	i2c_max77693_fuel: i2c-gpio-3 {
 		compatible = "i2c-gpio";
-		gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>, <&gpf1 4 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpf1 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf1 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -228,7 +230,8 @@
 
 	i2c-mhl {
 		compatible = "i2c-gpio";
-		gpios = <&gpf0 4 GPIO_ACTIVE_HIGH>, <&gpf0 6 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&gpf0 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpf0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <100>;
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -820,7 +823,7 @@
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
@@ -831,7 +834,7 @@
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
@@ -842,7 +845,7 @@
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-always-on;
@@ -853,7 +856,7 @@
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1150000>;
 				regulator-boot-on;
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 73d6a71da88d..a5c1ce1e396c 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -430,7 +430,7 @@
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-always-on;
@@ -438,7 +438,7 @@
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1350000>;
 				regulator-always-on;
@@ -446,7 +446,7 @@
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1050000>;
 				regulator-always-on;
@@ -454,7 +454,7 @@
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1100000>;
 				regulator-microvolt-offset = <50000>;
diff --git a/arch/arm/boot/dts/exynos4412-origen.dts b/arch/arm/boot/dts/exynos4412-origen.dts
index ecd14b283a6b..dc865be40751 100644
--- a/arch/arm/boot/dts/exynos4412-origen.dts
+++ b/arch/arm/boot/dts/exynos4412-origen.dts
@@ -363,7 +363,7 @@
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt	= <1100000>;
 				regulator-always-on;
@@ -372,7 +372,7 @@
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt	= <1350000>;
 				regulator-always-on;
@@ -381,7 +381,7 @@
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt	= <1200000>;
 				regulator-always-on;
@@ -390,7 +390,7 @@
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt	= <1500000>;
 				regulator-always-on;
@@ -399,7 +399,7 @@
 			};
 
 			buck5_reg: BUCK5 {
-				regulator-name = "vdd_m12";
+				regulator-name = "VDD_M12";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt	= <1500000>;
 				regulator-always-on;
@@ -408,7 +408,7 @@
 			};
 
 			buck6_reg: BUCK6 {
-				regulator-name = "vdd12_5m";
+				regulator-name = "VDD12_5M";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt	= <1500000>;
 				regulator-always-on;
@@ -417,7 +417,7 @@
 			};
 
 			buck9_reg: BUCK9 {
-				regulator-name = "vddf28_emmc";
+				regulator-name = "VDDF28_EMMC";
 				regulator-min-microvolt = <750000>;
 				regulator-max-microvolt	= <3000000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts
index 6904091d4837..c4cc7611898c 100644
--- a/arch/arm/boot/dts/exynos5250-arndale.dts
+++ b/arch/arm/boot/dts/exynos5250-arndale.dts
@@ -454,7 +454,7 @@
 			};
 
 			buck1_reg: BUCK1 {
-				regulator-name = "vdd_mif";
+				regulator-name = "VDD_MIF";
 				regulator-min-microvolt = <950000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
@@ -463,7 +463,7 @@
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "VDD_ARM";
 				regulator-min-microvolt = <912500>;
 				regulator-max-microvolt = <1300000>;
 				regulator-always-on;
@@ -472,7 +472,7 @@
 			};
 
 			buck3_reg: BUCK3 {
-				regulator-name = "vdd_int";
+				regulator-name = "VDD_INT";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1200000>;
 				regulator-always-on;
@@ -481,7 +481,7 @@
 			};
 
 			buck4_reg: BUCK4 {
-				regulator-name = "vdd_g3d";
+				regulator-name = "VDD_G3D";
 				regulator-min-microvolt = <850000>;
 				regulator-max-microvolt = <1300000>;
 				regulator-always-on;
@@ -641,9 +641,8 @@
 		pinctrl-0 = <&i2c2_gpio_bus>;
 		status = "okay";
 		compatible = "i2c-gpio";
-		gpios = <&gpa0 6 0 /* sda */
-			 &gpa0 7 0 /* scl */
-			>;
+		sda-gpios = <&gpa0 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpa0 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		#address-cells = <1>;
 		#size-cells = <0>;
diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
index e9a09dd0a49b..dd7f8385d81e 100644
--- a/arch/arm/boot/dts/exynos5420-arndale-octa.dts
+++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts
@@ -673,7 +673,7 @@
 			};
 
 			buck2_reg: BUCK2 {
-				regulator-name = "vdd_arm";
+				regulator-name = "PVDD_ARM_1V0";
 				regulator-min-microvolt = <800000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-always-on;
diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi
index d325658901c5..1f4ecbca5225 100644
--- a/arch/arm/boot/dts/imx50.dtsi
+++ b/arch/arm/boot/dts/imx50.dtsi
@@ -288,11 +288,6 @@
 				reg = <0x53fa8000 0x4000>;
 			};
 
-			gpr: iomuxc-gpr@53fa8000 {
-				compatible = "fsl,imx50-iomuxc-gpr", "syscon";
-				reg = <0x53fa8000 0xc>;
-			};
-
 			pwm1: pwm@53fb4000 {
 				#pwm-cells = <2>;
 				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
@@ -333,9 +328,10 @@
 				status = "disabled";
 			};
 
-			src: src@53fd0000 {
+			src: reset-controller@53fd0000 {
 				compatible = "fsl,imx50-src", "fsl,imx51-src";
 				reg = <0x53fd0000 0x4000>;
+				interrupts = <75>;
 				#reset-cells = <1>;
 			};
 
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 92fbb90bec57..d3583aad8323 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -439,9 +439,10 @@
 				status = "disabled";
 			};
 
-			src: src@73fd0000 {
+			src: reset-controller@73fd0000 {
 				compatible = "fsl,imx51-src";
 				reg = <0x73fd0000 0x4000>;
+				interrupts = <75>;
 				#reset-cells = <1>;
 			};
 
diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts
index 0a475c234054..cfb18849a92b 100644
--- a/arch/arm/boot/dts/imx53-cx9020.dts
+++ b/arch/arm/boot/dts/imx53-cx9020.dts
@@ -59,23 +59,26 @@
 	};
 
 	dvi-converter {
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "ti,tfp410";
 
-		port@0 {
-			reg = <0>;
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
 
-			tfp410_in: endpoint {
-				remote-endpoint = <&display0_out>;
+				tfp410_in: endpoint {
+					remote-endpoint = <&display0_out>;
+				};
 			};
-		};
 
-		port@1 {
-			reg = <1>;
+			port@1 {
+				reg = <1>;
 
-			tfp410_out: endpoint {
-				remote-endpoint = <&dvi_connector_in>;
+				tfp410_out: endpoint {
+					remote-endpoint = <&dvi_connector_in>;
+				};
 			};
 		};
 	};
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index 8536f59f59e6..afa57bf7b0ed 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -588,9 +588,10 @@
 				status = "disabled";
 			};
 
-			src: src@53fd0000 {
+			src: reset-controller@53fd0000 {
 				compatible = "fsl,imx53-src", "fsl,imx51-src";
 				reg = <0x53fd0000 0x4000>;
+				interrupts = <75>;
 				#reset-cells = <1>;
 			};
 
diff --git a/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
new file mode 100644
index 000000000000..223275f028f1
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-colibri-v1_1-eval-v3.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2020 Toradex
+ */
+
+/dts-v1/;
+
+#include "imx6dl-colibri-eval-v3.dts"
+#include "imx6qdl-colibri-v1_1-uhs.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6DL/S V1.1 on Colibri Evaluation Board V3";
+	compatible = "toradex,colibri_imx6dl-v1_1-eval-v3",
+		     "toradex,colibri_imx6dl-v1_1",
+		     "toradex,colibri_imx6dl-eval-v3",
+		     "toradex,colibri_imx6dl",
+		     "fsl,imx6dl";
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	status = "okay";
+	/*
+	 * Please make sure your carrier board does not pull-up any of
+	 * the MMC/SD signals to 3.3 volt before attempting to activate
+	 * UHS-I support.
+	 * To let signaling voltage be changed to 1.8V, please
+	 * delete no-1-8-v property (example below):
+	 * /delete-property/no-1-8-v;
+	 */
+};
diff --git a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
index bb74fc62d913..a2dd7e549568 100644
--- a/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/imx6q-dhcom-pdk2.dts
@@ -22,6 +22,53 @@
 		clock-frequency = <24000000>;
 	};
 
+	display_bl: display-bl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&gpio3 27 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	lcd_display: disp0 {
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_lcdif>;
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			lcd_display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			lcd_display_out: endpoint {
+				remote-endpoint = <&lcd_panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0edh6";
+		ddc-i2c-bus = <&i2c2>;
+		backlight = <&display_bl>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
 	sound {
 		compatible = "fsl,imx-audio-sgtl5000";
 		model = "imx-sgtl5000";
@@ -65,6 +112,15 @@
 		VDDA-supply = <&reg_3p3v>;
 		VDDIO-supply = <&sw2_reg>;
 	};
+
+	touchscreen@38 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touchscreen>;
+		compatible = "edt,edt-ft5406";
+		reg = <0x38>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+	};
 };
 
 &iomuxc {
@@ -77,9 +133,7 @@
 			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x400120b0
 			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x400120b0
 			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x400120b0
-			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x120b0
 			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20		0x400120b0
-			MX6QDL_PAD_EIM_D27__GPIO3_IO27		0x120b0
 			MX6QDL_PAD_KEY_ROW0__GPIO4_IO07		0x120b0
 			MX6QDL_PAD_KEY_COL1__GPIO4_IO08		0x400120b0
 			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x400120b0
@@ -132,6 +186,52 @@
 		>;
 	};
 
+	pinctrl_ipu1_lcdif: ipu1-lcdif-grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x38
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x38
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x38
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x38
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x38
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x38
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x38
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x38
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x38
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x38
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x38
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x38
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x38
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x38
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x38
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x38
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x38
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x38
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x38
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x38
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x38
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x38
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18	0x38
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19	0x38
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20	0x38
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21	0x38
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22	0x38
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23	0x38
+			MX6QDL_PAD_EIM_D27__GPIO3_IO27			0x120b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_DAT3__PWM1_OUT		0x1b0b1
+		>;
+	};
+
+	pinctrl_touchscreen: touchscreen-grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b1
+		>;
+	};
+
 	pinctrl_pcie: pcie-grp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b1
@@ -139,6 +239,10 @@
 	};
 };
 
+&ipu1_di0_disp0 {
+	remote-endpoint = <&lcd_display_in>;
+};
+
 &pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
@@ -146,6 +250,13 @@
 	status = "okay";
 };
 
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	#pwm-cells = <3>;
+	status = "okay";
+};
+
 &ssi1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
new file mode 100644
index 000000000000..7672fbfc29be
--- /dev/null
+++ b/arch/arm/boot/dts/imx6qdl-colibri-v1_1-uhs.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright 2020 Toradex
+ */
+
+&iomuxc {
+	pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170b1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100b1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170b1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170b1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170b1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170b1
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD    0x170f1
+			MX6QDL_PAD_SD1_CLK__SD1_CLK    0x100f1
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f1
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f1
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f1
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f1
+		>;
+	};
+};
+
+/* Colibri MMC */
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1 &pinctrl_mmc_cd>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz &pinctrl_mmc_cd>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz &pinctrl_mmc_cd>;
+	vmmc-supply = <&reg_module_3v3>;
+	vqmmc-supply = <&vgen3_reg>;
+	wakeup-source;
+	keep-power-in-suspend;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+};
diff --git a/arch/arm/boot/dts/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
index 6e3c6b4925a7..240b86d2eb71 100644
--- a/arch/arm/boot/dts/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-colibri.dtsi
@@ -193,7 +193,16 @@
 				regulator-always-on;
 			};
 
-			/* vgen3: unused */
+			/*
+			 * +V3.3_1.8_SD1 coming off VGEN3 and supplying
+			 * the i.MX 6 NVCC_SD1.
+			 */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
 
 			vgen4_reg: vgen4 {
 				regulator-min-microvolt = <1800000>;
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index dc646b72b59a..bb3597132c62 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -258,6 +258,14 @@
 	status = "okay";
 };
 
+&usbotg {
+	vbus-supply = <&reg_5p0v>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	disable-over-current;
+	status = "okay";
+};
+
 &wdog1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_wdog>;
@@ -359,6 +367,12 @@
 		>;
 	};
 
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x13059
+		>;
+	};
+
 	pinctrl_wdog: wdoggrp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT8__WDOG1_B		0x1b0b0
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index e8e36dfd0a6b..69ca70d3baa8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -295,6 +295,15 @@
 		VDDIO-supply = <&reg_3p3v>;
 	};
 
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <9 IRQ_TYPE_EDGE_RISING>;
+	};
+
 	tca8418: keypad@34 {
 		compatible = "ti,tca8418";
 		pinctrl-names = "default";
@@ -389,6 +398,16 @@
 			};
 		};
 	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+	};
 };
 
 &i2c3 {
@@ -609,6 +628,12 @@
 		>;
 	};
 
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x1b0b0
+		>;
+	};
+
 	pinctrl_keypad: keypadgrp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x0001b0b0 /* KEYPAD_IRQ# */
@@ -616,6 +641,12 @@
 		>;
 	};
 
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b0
+		>;
+	};
+
 	pinctrl_pcie: pciegrp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b0    /* PCI_RST# */
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 6d21cc6a9d4b..76d6cf57f1c3 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -248,6 +248,15 @@
 	pinctrl-0 = <&pinctrl_i2c2>;
 	status = "okay";
 
+	magn@1c {
+		compatible = "st,lsm9ds1-magn";
+		reg = <0x1c>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mag>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+	};
+
 	ltc3676: pmic@3c {
 		compatible = "lltc,ltc3676";
 		reg = <0x3c>;
@@ -320,6 +329,16 @@
 			};
 		};
 	};
+
+	imu@6a {
+		compatible = "st,lsm9ds1-imu";
+		reg = <0x6a>;
+		st,drdy-int-pin = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_imu>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
+	};
 };
 
 &i2c3 {
@@ -501,6 +520,18 @@
 		>;
 	};
 
+	pinctrl_imu: imugrp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18		0x1b0b0
+		>;
+	};
+
+	pinctrl_mag: maggrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0
+		>;
+	};
+
 	pinctrl_pcie: pciegrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0 /* PCIE RST */
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 30fe47ff64a4..0857de505192 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -81,20 +81,6 @@
 		enable-active-high;
 		regulator-min-microvolt = <3300000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-	};
-
-	reg_bt: regulator-bt {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_bt>;
-		compatible = "regulator-fixed";
-		regulator-name = "bt";
-		gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-		startup-delay-us = <100>;
-		enable-active-high;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
 	};
 };
 
@@ -231,9 +217,14 @@
 /* Sterling-LWB Bluetooth */
 &uart4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>;
 	uart-has-rtscts;
 	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4330-bt";
+		shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 /* GPS */
@@ -259,7 +250,7 @@
 &usdhc2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_usdhc2>;
-	vmmc-supply = <&reg_3p3v>;
+	vmmc-supply = <&reg_wl>;
 	non-removable;
 	bus-width = <4>;
 	status = "okay";
@@ -288,6 +279,12 @@
 		>;
 	};
 
+	pinctrl_bten: btengrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
+		>;
+	};
+
 	pinctrl_ecspi3: escpi3grp {
 		fsl,pins = <
 			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
@@ -393,12 +390,6 @@
 		>;
 	};
 
-	pinctrl_reg_bt: regbtgrp {
-		fsl,pins = <
-			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b1
-		>;
-	};
-
 	pinctrl_reg_wl: regwlgrp {
 		fsl,pins = <
 			MX6QDL_PAD_GPIO_5__GPIO1_IO05		0x1b0b1
diff --git a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
index 6d7f6b9035bc..b06577808ff4 100644
--- a/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sr-som.dtsi
@@ -53,10 +53,21 @@
 &fec {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_microsom_enet_ar8035>;
+	phy-handle = <&phy>;
 	phy-mode = "rgmii-id";
 	phy-reset-duration = <2>;
 	phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy: ethernet-phy@0 {
+			reg = <0>;
+			qca,clk-out-frequency = <125000000>;
+		};
+	};
 };
 
 &iomuxc {
diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi
index 48f50161ea21..32114cf6acee 100644
--- a/arch/arm/boot/dts/imx6qdl.dtsi
+++ b/arch/arm/boot/dts/imx6qdl.dtsi
@@ -74,7 +74,8 @@
 		interrupt-parent = <&gpc>;
 		interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
 		fsl,tempmon = <&anatop>;
-		fsl,tempmon-data = <&ocotp>;
+		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+		nvmem-cell-names = "calib", "temp_grade";
 		clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>;
 		#thermal-sensor-cells = <0>;
 	};
@@ -857,7 +858,7 @@
 				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			src: src@20d8000 {
+			src: reset-controller@20d8000 {
 				compatible = "fsl,imx6q-src", "fsl,imx51-src";
 				reg = <0x020d8000 0x4000>;
 				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -1171,6 +1172,14 @@
 				cpu_speed_grade: speed-grade@10 {
 					reg = <0x10 4>;
 				};
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
 			};
 
 			tzasc@21d0000 { /* TZASC1 */
diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi
index 8230b45057a1..911d8cf77f2c 100644
--- a/arch/arm/boot/dts/imx6sl.dtsi
+++ b/arch/arm/boot/dts/imx6sl.dtsi
@@ -98,7 +98,8 @@
 		interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-parent = <&gpc>;
 		fsl,tempmon = <&anatop>;
-		fsl,tempmon-data = <&ocotp>;
+		nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+		nvmem-cell-names = "calib", "temp_grade";
 		clocks = <&clks IMX6SL_CLK_PLL3_USB_OTG>;
 	};
 
@@ -677,7 +678,7 @@
 				interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			src: src@20d8000 {
+			src: reset-controller@20d8000 {
 				compatible = "fsl,imx6sl-src", "fsl,imx51-src";
 				reg = <0x020d8000 0x4000>;
 				interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>,
@@ -961,6 +962,14 @@
 				cpu_speed_grade: speed-grade@10 {
 					reg = <0x10 4>;
 				};
+
+				tempmon_calib: calib@38 {
+					reg = <0x38 4>;
+				};
+
+				tempmon_temp_grade: temp-grade@20 {
+					reg = <0x20 4>;
+				};
 			};
 
 			audmux: audmux@21d8000 {
diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi
index 09f21aaee936..94e3df47d1ad 100644
--- a/arch/arm/boot/dts/imx6sx.dtsi
+++ b/arch/arm/boot/dts/imx6sx.dtsi
@@ -754,7 +754,7 @@
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			src: src@20d8000 {
+			src: reset-controller@20d8000 {
 				compatible = "fsl,imx6sx-src", "fsl,imx51-src";
 				reg = <0x020d8000 0x4000>;
 				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 345ae9b0db37..5379a03391bd 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -677,7 +677,7 @@
 				interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
-			src: src@20d8000 {
+			src: reset-controller@20d8000 {
 				compatible = "fsl,imx6ul-src", "fsl,imx51-src";
 				reg = <0x020d8000 0x4000>;
 				interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
diff --git a/arch/arm/boot/dts/imx7-tqma7.dtsi b/arch/arm/boot/dts/imx7-tqma7.dtsi
index 9aaed85138cb..8773344b54aa 100644
--- a/arch/arm/boot/dts/imx7-tqma7.dtsi
+++ b/arch/arm/boot/dts/imx7-tqma7.dtsi
@@ -16,7 +16,7 @@
 };
 
 &cpu0 {
-	arm-supply = <&sw1a_reg>;
+	cpu-supply = <&sw1a_reg>;
 };
 
 &i2c1 {
diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
index 89267cd59037..713483c39c9d 100644
--- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
+++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts
@@ -37,6 +37,10 @@
 	cpu-supply = <&sw1a_reg>;
 };
 
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
diff --git a/arch/arm/boot/dts/imx7d-colibri.dtsi b/arch/arm/boot/dts/imx7d-colibri.dtsi
index c59d72e50920..219a0404a058 100644
--- a/arch/arm/boot/dts/imx7d-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7d-colibri.dtsi
@@ -13,6 +13,10 @@
 	};
 };
 
+&cpu1 {
+	cpu-supply = <&reg_DCDC2>;
+};
+
 &gpmi {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/imx7d-nitrogen7.dts b/arch/arm/boot/dts/imx7d-nitrogen7.dts
index 6b4acea1ef79..e0751e6ba3c0 100644
--- a/arch/arm/boot/dts/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/imx7d-nitrogen7.dts
@@ -121,6 +121,10 @@
 	cpu-supply = <&sw1a_reg>;
 };
 
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
 &fec1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1>;
diff --git a/arch/arm/boot/dts/imx7d-pinfunc.h b/arch/arm/boot/dts/imx7d-pinfunc.h
index 08ca1608fdb1..69f2c1ec8254 100644
--- a/arch/arm/boot/dts/imx7d-pinfunc.h
+++ b/arch/arm/boot/dts/imx7d-pinfunc.h
@@ -592,7 +592,7 @@
 #define MX7D_PAD_UART2_RX_DATA__ECSPI1_SS3                        0x0130 0x03A0 0x0000 0x3 0x0
 #define MX7D_PAD_UART2_RX_DATA__ENET2_1588_EVENT1_IN              0x0130 0x03A0 0x0000 0x4 0x0
 #define MX7D_PAD_UART2_RX_DATA__GPIO4_IO2                         0x0130 0x03A0 0x0000 0x5 0x0
-#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO                        0x0130 0x03A0 0x0000 0x6 0x0
+#define MX7D_PAD_UART2_RX_DATA__ENET2_MDIO                        0x0130 0x03A0 0x0574 0x6 0x1
 #define MX7D_PAD_UART2_TX_DATA__UART2_DCE_TX                      0x0134 0x03A4 0x0000 0x0 0x0
 #define MX7D_PAD_UART2_TX_DATA__UART2_DTE_RX                      0x0134 0x03A4 0x06FC 0x0 0x3
 #define MX7D_PAD_UART2_TX_DATA__I2C2_SDA                          0x0134 0x03A4 0x05E0 0x1 0x0
diff --git a/arch/arm/boot/dts/imx7d-sdb.dts b/arch/arm/boot/dts/imx7d-sdb.dts
index 869efbc4af42..17cca8a9f77b 100644
--- a/arch/arm/boot/dts/imx7d-sdb.dts
+++ b/arch/arm/boot/dts/imx7d-sdb.dts
@@ -162,6 +162,10 @@
 	cpu-supply = <&sw1a_reg>;
 };
 
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
+
 &ecspi3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi3>;
diff --git a/arch/arm/boot/dts/imx7d-tqma7.dtsi b/arch/arm/boot/dts/imx7d-tqma7.dtsi
index 8ad3048dac0d..598aed1ffd99 100644
--- a/arch/arm/boot/dts/imx7d-tqma7.dtsi
+++ b/arch/arm/boot/dts/imx7d-tqma7.dtsi
@@ -9,3 +9,7 @@
 
 #include "imx7d.dtsi"
 #include "imx7-tqma7.dtsi"
+
+&cpu1 {
+	cpu-supply = <&sw1a_reg>;
+};
diff --git a/arch/arm/boot/dts/imx7d-zii-rmu2.dts b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
index 2b8d6cc45a53..e5e20b07f184 100644
--- a/arch/arm/boot/dts/imx7d-zii-rmu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rmu2.dts
@@ -33,7 +33,7 @@
 };
 
 &cpu0 {
-	arm-supply = <&sw1a_reg>;
+	cpu-supply = <&sw1a_reg>;
 };
 
 &ecspi1 {
diff --git a/arch/arm/boot/dts/imx7d-zii-rpu2.dts b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
index 39812c92bf0d..cbf0dbb4c198 100644
--- a/arch/arm/boot/dts/imx7d-zii-rpu2.dts
+++ b/arch/arm/boot/dts/imx7d-zii-rpu2.dts
@@ -182,7 +182,7 @@
 };
 
 &cpu0 {
-	arm-supply = <&sw1a_reg>;
+	cpu-supply = <&sw1a_reg>;
 };
 
 &clks {
diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi
index 5bf0b39fa99b..f6bb35d3ce51 100644
--- a/arch/arm/boot/dts/imx7s.dtsi
+++ b/arch/arm/boot/dts/imx7s.dtsi
@@ -624,7 +624,7 @@
 				clock-names = "ckil", "osc";
 			};
 
-			src: src@30390000 {
+			src: reset-controller@30390000 {
 				compatible = "fsl,imx7d-src", "syscon";
 				reg = <0x30390000 0x10000>;
 				interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm/boot/dts/integratorap-im-pd1.dts b/arch/arm/boot/dts/integratorap-im-pd1.dts
new file mode 100644
index 000000000000..1412a1a968fc
--- /dev/null
+++ b/arch/arm/boot/dts/integratorap-im-pd1.dts
@@ -0,0 +1,270 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree for the ARM Integrator/AP platform
+ * with the IM-PD1 example logical module mounted.
+ */
+
+#include "integratorap.dts"
+
+/ {
+	model = "ARM Integrator/AP with IM-PD1";
+	compatible = "arm,integrator-ap";
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		impd1_ram: vram@c2000000 {
+			/* 1 MB of designated video RAM on the IM-PD1 */
+			compatible = "shared-dma-pool";
+			reg = <0xc2000000 0x00100000>;
+			no-map;
+		};
+	};
+};
+
+&lm0 {
+	syscon@0 {
+		compatible = "arm,im-pd1-syscon", "syscon";
+		reg = <0x00000000 0x1000>;
+
+		vco1: clock@00 {
+			compatible = "arm,impd1-vco1";
+			#clock-cells = <0>;
+			lock-offset = <0x08>;
+			vco-offset = <0x00>;
+			clocks = <&sysclk>;
+			clock-output-names = "IM-PD1-VCO1";
+		};
+
+		vco2: clock@04 {
+			compatible = "arm,impd1-vco2";
+			#clock-cells = <0>;
+			lock-offset = <0x08>;
+			vco-offset = <0x04>;
+			clocks = <&sysclk>;
+			clock-output-names = "IM-PD1-VCO2";
+		};
+	};
+
+	/* Also used for the Smart Card Interface SCI */
+	impd1_uartclk: clock@1_4 {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clock-div = <4>;
+		clock-mult = <1>;
+		clocks = <&vco2>;
+		clock-output-names = "VCO2_DIV4";
+	};
+
+	/* For the SSP the clock is divided by 64 */
+	impd1_sspclk: clock@1_64 {
+		compatible = "fixed-factor-clock";
+		#clock-cells = <0>;
+		clock-div = <64>;
+		clock-mult = <1>;
+		clocks = <&vco2>;
+		clock-output-names = "VCO2_DIV64";
+	};
+
+	/* Fixed regulator for the MMC */
+	impd1_3v3: regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* Push buttons on the IM-PD1 */
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		button@0 {
+			debounce-interval = <50>;
+			linux,code = <KEY_UP>;
+			label = "UP";
+			gpios = <&impd1_gpio1 0 GPIO_ACTIVE_HIGH>;
+		};
+		button@1 {
+			debounce-interval = <50>;
+			linux,code = <KEY_DOWN>;
+			label = "DOWN";
+			gpios = <&impd1_gpio1 1 GPIO_ACTIVE_HIGH>;
+		};
+		button@2 {
+			debounce-interval = <50>;
+			linux,code = <KEY_LEFT>;
+			label = "LEFT";
+			gpios = <&impd1_gpio1 2 GPIO_ACTIVE_HIGH>;
+		};
+		button@3 {
+			debounce-interval = <50>;
+			linux,code = <KEY_RIGHT>;
+			label = "UP";
+			gpios = <&impd1_gpio1 3 GPIO_ACTIVE_HIGH>;
+		};
+		button@4 {
+			debounce-interval = <50>;
+			linux,code = <KEY_ESC>;
+			label = "ESC";
+			gpios = <&impd1_gpio1 4 GPIO_ACTIVE_HIGH>;
+		};
+		button@5 {
+			debounce-interval = <50>;
+			linux,code = <KEY_ENTER>;
+			label = "ENTER";
+			gpios = <&impd1_gpio1 5 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+
+	bridge {
+		compatible = "ti,ths8134b", "ti,ths8134";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			port@0 {
+				reg = <0>;
+					vga_bridge_in: endpoint {
+					remote-endpoint = <&clcd_pads_vga_dac>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				vga_bridge_out: endpoint {
+					remote-endpoint = <&vga_con_in>;
+				};
+			};
+		};
+	};
+
+	vga {
+		compatible = "vga-connector";
+
+		port {
+			vga_con_in: endpoint {
+				remote-endpoint = <&vga_bridge_out>;
+			};
+		};
+	};
+
+	uart@100000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x00100000 0x1000>;
+		interrupts-extended = <&impd1_vic 1>;
+		clocks = <&impd1_uartclk>, <&sysclk>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	uart@200000 {
+		compatible = "arm,pl011", "arm,primecell";
+		reg = <0x00200000 0x1000>;
+		interrupts-extended = <&impd1_vic 2>;
+		clocks = <&impd1_uartclk>, <&sysclk>;
+		clock-names = "uartclk", "apb_pclk";
+	};
+
+	ssp@300000 {
+		compatible = "arm,pl022", "arm,primecell";
+		reg = <0x00300000 0x1000>;
+		interrupts-extended = <&impd1_vic 3>;
+		clocks = <&impd1_sspclk>, <&sysclk>;
+		clock-names = "spiclk", "apb_pclk";
+	};
+
+	impd1_gpio0: gpio@400000 {
+		compatible = "arm,pl061", "arm,primecell";
+		reg = <0x00400000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts-extended = <&impd1_vic 4>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	impd1_gpio1: gpio@500000 {
+		compatible = "arm,pl061", "arm,primecell";
+		reg = <0x00500000 0x1000>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupts-extended = <&impd1_vic 5>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	rtc@600000 {
+		compatible = "arm,pl030", "arm,primecell";
+		reg = <0x00600000 0x1000>;
+		interrupts-extended = <&impd1_vic 6>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	mmc@700000 {
+		compatible = "arm,pl181", "arm,primecell";
+		reg = <0x00700000 0x1000>;
+		interrupts-extended = <&impd1_vic 7>,
+				    <&impd1_vic 8>;
+		clocks = <&sysclk>, <&sysclk>;
+		clock-names = "mclk", "apb_pclk";
+		bus-width = <1>;
+		max-frequency = <515633>;
+		vmmc-supply = <&impd1_3v3>;
+		wp-gpios = <&impd1_gpio0 3 GPIO_ACTIVE_HIGH>;
+		cd-gpios = <&impd1_gpio0 4 GPIO_ACTIVE_LOW>;
+	};
+
+	aaci@800000 {
+		compatible = "arm,pl041", "arm,primecell";
+		reg = <0x00800000 0x1000>;
+		interrupts-extended = <&impd1_vic 9>;
+		clocks = <&sysclk>;
+		clock-names = "apb_pclk";
+	};
+
+	display@1000000 {
+		compatible = "arm,pl110", "arm,primecell";
+		reg = <0x01000000 0x1000>;
+		interrupts-extended = <&impd1_vic 11>;
+		clocks = <&vco1>, <&sysclk>;
+		clock-names = "clcdclk", "apb_pclk";
+		/* 640x480 16bpp @ 25.175MHz is 36827428 bytes/s */
+		max-memory-bandwidth = <40000000>;
+		memory-region = <&impd1_ram>;
+
+		port@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clcd_pads_vga_dac: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&vga_bridge_in>;
+				arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+			};
+		};
+	};
+
+	impd1_vic: interrupt-controller@3000000 {
+		compatible = "arm,pl192-vic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x03000000 0x1000>;
+		/* Valid interrupts, 0-9 and 11 */
+		valid-mask = <0x00000bff>;
+		/* LM site 0 has IRQ 9 on the PIC */
+		interrupts-extended = <&pic 9>;
+	};
+};
diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts
index 198d66181c50..67d1f9b24a52 100644
--- a/arch/arm/boot/dts/integratorap.dts
+++ b/arch/arm/boot/dts/integratorap.dts
@@ -4,7 +4,9 @@
  */
 
 /dts-v1/;
-/include/ "integrator.dtsi"
+#include "integrator.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "ARM Integrator/AP";
@@ -107,9 +109,6 @@
 	syscon {
 		compatible = "arm,integrator-ap-syscon", "syscon";
 		reg = <0x11000000 0x100>;
-		interrupt-parent = <&pic>;
-		/* These are the logical module IRQs */
-		interrupts = <9>, <10>, <11>, <12>;
 
 		/*
 		 * SYSCLK clocks PCIv3 bridge, system controller and the
@@ -239,4 +238,50 @@
 			clock-names = "KMIREFCLK", "apb_pclk";
 		};
 	};
+
+	/*
+	 * Logic module bus, we support up to 4 logical modules
+	 * They appear at 0xc0000000, 0xd0000000, 0xe0000000 and 0xf0000000
+	 * and use interrupts 9, 10, 11 and 12 respectively.
+	 */
+	bus@c0000000 {
+		compatible = "arm,integrator-ap-lm";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0xc0000000 0xc0000000 0x40000000>;
+		dma-ranges;
+
+		lm0: bus@c0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xc0000000 0x10000000>;
+			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			reg = <0xc0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm1: bus@d0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xd0000000 0x10000000>;
+			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			reg = <0xd0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm2: bus@e0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xe0000000 0x10000000>;
+			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			reg = <0xe0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+		lm3: bus@f0000000 {
+			compatible = "simple-bus";
+			ranges = <0x00000000 0xf0000000 0x10000000>;
+			dma-ranges = <0x00000000 0x80000000 0x10000000>;
+			reg = <0xf0000000 0x10000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
index 085e7326ea8e..2d94faf31fab 100644
--- a/arch/arm/boot/dts/keystone-k2e.dtsi
+++ b/arch/arm/boot/dts/keystone-k2e.dtsi
@@ -86,14 +86,14 @@
 			};
 		};
 
-		msm_ram: msmram@c000000 {
+		msm_ram: sram@c000000 {
 			compatible = "mmio-sram";
 			reg = <0x0c000000 0x200000>;
 			ranges = <0x0 0x0c000000 0x200000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			sram-bm@1f0000 {
+			bm-sram@1f0000 {
 				reg = <0x001f0000 0x8000>;
 			};
 		};
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index b7f10bf94576..db640bab8c1d 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -45,6 +45,19 @@
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
 	};
+
+	hdmi: connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&sii9022_out>;
+			};
+		};
+	};
 };
 
 &k2g_pinctrl {
@@ -89,6 +102,13 @@
 		>;
 	};
 
+	i2c1_pins: pinmux_i2c1_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_scl.i2c1_scl */
+			K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0)	/* i2c1_sda.i2c1_sda */
+		>;
+	};
+
 	ecap0_pins: ecap0_pins {
 		pinctrl-single,pins = <
 			K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4)	/* pr1_mdio_data.ecap0_in_apwm0_out */
@@ -160,6 +180,40 @@
 			K2G_CORE_IOPAD(0x1188) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0)	/* MDIO_DATA.MDIO_DATA */
 		>;
 	};
+
+	vout_pins: pinmux_vout_pins {
+		pinctrl-single,pins = <
+			K2G_CORE_IOPAD(0x1078) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata23.dssdata23 */
+			K2G_CORE_IOPAD(0x107c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata22.dssdata22 */
+			K2G_CORE_IOPAD(0x1080) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata21.dssdata21 */
+			K2G_CORE_IOPAD(0x1084) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata20.dssdata20 */
+			K2G_CORE_IOPAD(0x1088) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata19.dssdata19 */
+			K2G_CORE_IOPAD(0x108c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata18.dssdata18 */
+			K2G_CORE_IOPAD(0x1090) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata17.dssdata17 */
+			K2G_CORE_IOPAD(0x1094) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata16.dssdata16 */
+			K2G_CORE_IOPAD(0x1098) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata15.dssdata15 */
+			K2G_CORE_IOPAD(0x109c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata14.dssdata14 */
+			K2G_CORE_IOPAD(0x10a0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata13.dssdata13 */
+			K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata12.dssdata12 */
+			K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata11.dssdata11 */
+			K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata10.dssdata10 */
+			K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata9.dssdata9 */
+			K2G_CORE_IOPAD(0x10b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata8.dssdata8 */
+			K2G_CORE_IOPAD(0x10b8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata7.dssdata7 */
+			K2G_CORE_IOPAD(0x10bc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata6.dssdata6 */
+			K2G_CORE_IOPAD(0x10c0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata5.dssdata5 */
+			K2G_CORE_IOPAD(0x10c4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata4.dssdata4 */
+			K2G_CORE_IOPAD(0x10c8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata3.dssdata3 */
+			K2G_CORE_IOPAD(0x10cc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata2.dssdata2 */
+			K2G_CORE_IOPAD(0x10d0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata1.dssdata1 */
+			K2G_CORE_IOPAD(0x10d4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssdata0.dssdata0 */
+			K2G_CORE_IOPAD(0x10d8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssvsync.dssvsync */
+			K2G_CORE_IOPAD(0x10dc) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsshsync.dsshsync */
+			K2G_CORE_IOPAD(0x10e0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dsspclk.dsspclk */
+			K2G_CORE_IOPAD(0x10e4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssde.dssde */
+			K2G_CORE_IOPAD(0x10e8) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* dssfid.dssfid */
+		>;
+	};
 };
 
 &uart0 {
@@ -357,3 +411,50 @@
 	pinctrl-0 = <&emac_pins>;
 	status = "okay";
 };
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sii9022: sii9022@3b {
+		#sound-dai-cells = <0>;
+		compatible = "sil,sii9022";
+		reg = <0x3b>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				sii9022_in: endpoint {
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				sii9022_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&dss {
+	pinctrl-names = "default";
+	pinctrl-0 = <&vout_pins>;
+	status = "ok";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&sii9022_in>;
+			data-lines = <24>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 1c833105d6c5..05a75019275e 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -95,14 +95,14 @@
 		ranges = <0x0 0x0 0x0 0xc0000000>;
 		dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
 
-		msm_ram: msmram@c000000 {
+		msm_ram: sram@c000000 {
 			compatible = "mmio-sram";
 			reg = <0x0c000000 0x100000>;
 			ranges = <0x0 0x0c000000 0x100000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			sram-bm@f7000 {
+			bm-sram@f7000 {
 				reg = <0x000f7000 0x8000>;
 			};
 		};
@@ -324,6 +324,28 @@
 			clock-names = "gpio";
 		};
 
+		dss: dss@02540000 {
+			compatible = "ti,k2g-dss";
+			reg =	<0x02540000 0x400>,
+				<0x02550000 0x1000>,
+				<0x02557000 0x1000>,
+				<0x0255a800 0x100>,
+				<0x0255ac00 0x100>;
+			reg-names = "cfg", "common", "vid1", "ovr1", "vp1";
+			clocks =	<&k2g_clks 0x2 0>,
+					<&k2g_clks 0x2 1>;
+			clock-names = "fck", "vp1";
+			interrupts = <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&k2g_pds 0x2>;
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			max-memory-bandwidth = <230000000>;
+		};
+
 		edma0: edma@2700000 {
 			compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
 			reg =	<0x02700000 0x8000>;
diff --git a/arch/arm/boot/dts/keystone-k2hk.dtsi b/arch/arm/boot/dts/keystone-k2hk.dtsi
index ca0f198ba627..8a9447703310 100644
--- a/arch/arm/boot/dts/keystone-k2hk.dtsi
+++ b/arch/arm/boot/dts/keystone-k2hk.dtsi
@@ -57,14 +57,14 @@
 &soc0 {
 		/include/ "keystone-k2hk-clocks.dtsi"
 
-		msm_ram: msmram@c000000 {
+		msm_ram: sram@c000000 {
 			compatible = "mmio-sram";
 			reg = <0x0c000000 0x600000>;
 			ranges = <0x0 0x0c000000 0x600000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			sram-bm@5f0000 {
+			bm-sram@5f0000 {
 				reg = <0x5f0000 0x8000>;
 			};
 		};
diff --git a/arch/arm/boot/dts/keystone-k2l.dtsi b/arch/arm/boot/dts/keystone-k2l.dtsi
index 374c80124c4e..dff5fea72b2f 100644
--- a/arch/arm/boot/dts/keystone-k2l.dtsi
+++ b/arch/arm/boot/dts/keystone-k2l.dtsi
@@ -255,14 +255,14 @@
 			};
 		};
 
-		msm_ram: msmram@c000000 {
+		msm_ram: sram@c000000 {
 			compatible = "mmio-sram";
 			reg = <0x0c000000 0x200000>;
 			ranges = <0x0 0x0c000000 0x200000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			sram-bm@1f8000 {
+			bm-sram@1f8000 {
 				reg = <0x001f8000 0x8000>;
 			};
 		};
diff --git a/arch/arm/boot/dts/kirkwood-l-50.dts b/arch/arm/boot/dts/kirkwood-l-50.dts
new file mode 100644
index 000000000000..0d81c43a6a73
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
@@ -0,0 +1,438 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Check Point L-50 Board Description
+ * Copyright 2020 Pawel Dembicki <paweldembicki@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+	model = "Check Point L-50";
+	compatible = "checkpoint,l-50", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x20000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = &uart0;
+	};
+
+	ocp@f1000000 {
+		pinctrl: pin-controller@10000 {
+			pinctrl-0 = <&pmx_led38 &pmx_sysrst &pmx_button29>;
+			pinctrl-names = "default";
+
+			pmx_sysrst: pmx-sysrst {
+				marvell,pins = "mpp6";
+				marvell,function = "sysrst";
+			};
+
+			pmx_button29: pmx_button29 {
+				marvell,pins = "mpp29";
+				marvell,function = "gpio";
+			};
+
+			pmx_led38: pmx_led38 {
+				marvell,pins = "mpp38";
+				marvell,function = "gpio";
+			};
+
+			pmx_sdio_cd: pmx-sdio-cd {
+				marvell,pins = "mpp46";
+				marvell,function = "gpio";
+			};
+		};
+
+		serial@12000 {
+			status = "okay";
+		};
+
+		mvsdio@90000 {
+			status = "okay";
+			cd-gpios = <&gpio1 14 9>;
+		};
+
+		i2c@11000 {
+			status = "okay";
+			clock-frequency = <400000>;
+
+			gpio2: gpio-expander@20{
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1505q";
+				reg = <0x20>;
+
+				gpio-controller;
+			};
+
+			/* Three GPIOs from 0x21 exp. are undescribed in dts:
+			 * 1: DSL module reset (active low)
+			 * 5: mPCIE reset (active low)
+			 * 6: Express card reset (active low)
+			 */
+			gpio3: gpio-expander@21{
+				#gpio-cells = <2>;
+				#interrupt-cells = <2>;
+				compatible = "semtech,sx1505q";
+				reg = <0x21>;
+
+				gpio-controller;
+			};
+
+			rtc@30 {
+				compatible = "s35390a";
+				reg = <0x30>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		status_green {
+			label = "l-50:green:status";
+			gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+		};
+
+		status_red {
+			label = "l-50:red:status";
+			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
+		};
+
+		wifi {
+			label = "l-50:green:wifi";
+			gpios = <&gpio2 7 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		internet_green {
+			label = "l-50:green:internet";
+			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
+		};
+
+		internet_red {
+			label = "l-50:red:internet";
+			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
+		};
+
+		usb1_green {
+			label = "l-50:green:usb1";
+			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port3>;
+		};
+
+		usb1_red {
+			label = "l-50:red:usb1";
+			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
+		};
+
+		usb2_green {
+			label = "l-50:green:usb2";
+			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&hub_port1>;
+		};
+
+		usb2_red {
+			label = "l-50:red:usb2";
+			gpios = <&gpio2 5 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	usb2_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "usb2_pwr";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 3 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	usb1_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "usb1_pwr";
+
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 4 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+	};
+
+	mpcie_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "mpcie_pwr";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	express_card_pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "express_card_pwr";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		factory_defaults {
+			label = "factory_defaults";
+			gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART>;
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+
+	ethphy8: ethernet-phy@8 {
+		reg = <0x08>;
+	};
+
+	switch0: switch@10 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x10>;
+		dsa,member = <0 0>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan1";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan6";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "lan2";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan7";
+			};
+
+			switch0port5: port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-txid";
+				link = <&switch1port5>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				phy-mode = "rgmii-id";
+				ethernet = <&eth1port>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	switch@11 {
+		compatible = "marvell,mv88e6085";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x11>;
+		dsa,member = <0 1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan3";
+			};
+
+			port@1 {
+			       reg = <1>;
+			       label = "lan8";
+			};
+
+			port@2 {
+			       reg = <2>;
+			       label = "lan4";
+			};
+
+			port@3 {
+			       reg = <3>;
+			       label = "dmz";
+			};
+
+			switch1port5: port@5 {
+				reg = <5>;
+				phy-mode = "rgmii-txid";
+				link = <&switch0port5>;
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "dsl";
+				fixed-link {
+					speed = <100>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&eth0 {
+	status = "okay";
+	ethernet0-port@0 {
+		phy-handle = <&ethphy8>;
+	};
+};
+
+&eth1 {
+	status = "okay";
+	ethernet1-port@0 {
+		speed = <1000>;
+		duplex = <1>;
+	};
+};
+
+&nand {
+	status = "okay";
+	pinctrl-0 = <&pmx_nand>;
+	pinctrl-names = "default";
+
+	partition@0 {
+		label = "u-boot";
+		reg = <0x00000000 0x000c0000>;
+	};
+
+	partition@a0000 {
+		label = "bootldr-env";
+		reg = <0x000c0000 0x00040000>;
+	};
+
+	partition@100000 {
+		label = "kernel-1";
+		reg = <0x00100000 0x00800000>;
+	};
+
+	partition@900000 {
+		label = "rootfs-1";
+		reg = <0x00900000 0x07100000>;
+	};
+
+	partition@7a00000 {
+		label = "kernel-2";
+		reg = <0x07a00000 0x00800000>;
+	};
+
+	partition@8200000 {
+		label = "rootfs-2";
+		reg = <0x08200000 0x07100000>;
+	};
+
+	partition@f300000 {
+		label = "default_sw";
+		reg = <0x0f300000 0x07900000>;
+	};
+
+	partition@16c00000 {
+		label = "logs";
+		reg = <0x16c00000 0x01800000>;
+	};
+
+	partition@18400000 {
+		label = "preset_cfg";
+		reg = <0x18400000 0x00100000>;
+	};
+
+	partition@18500000 {
+		label = "adsl";
+		reg = <0x18500000 0x00100000>;
+	};
+
+	partition@18600000 {
+		label = "storage";
+		reg = <0x18600000 0x07a00000>;
+	};
+};
+
+&rtc {
+	status = "disabled";
+};
+
+&pciec {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&sata_phy0 {
+	status = "disabled";
+};
+
+&sata_phy1 {
+	status = "disabled";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	port@1 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <1>;
+		#trigger-source-cells = <0>;
+
+		hub_port1: port@1 {
+			reg = <1>;
+			#trigger-source-cells = <0>;
+		};
+
+		hub_port3: port@3 {
+			reg = <3>;
+			#trigger-source-cells = <0>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
index 8cc8550242ef..b13aee570804 100644
--- a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
+++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts
@@ -113,6 +113,20 @@
 		};
 	};
 
+	auxdisplay {
+		compatible = "hit,hd44780";
+		data-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>,
+				<&gpio1 1 GPIO_ACTIVE_HIGH>,
+				<&gpio1 3 GPIO_ACTIVE_HIGH>,
+				<&gpio1 17 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+		rs-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		rw-gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+		backlight-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
+		display-height-chars = <2>;
+		display-width-chars = <16>;
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index 2161e23bd98e..6c8d94beae78 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -228,7 +228,7 @@
 			reg = <0x20128 0x4>;
 		};
 
-		intc: main-interrupt-ctrl@20200 {
+		intc: interrupt-controller@20200 {
 			compatible = "marvell,orion-intc";
 			interrupt-controller;
 			#interrupt-cells = <1>;
diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index 9b1fe99d55b1..5edf001f6138 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -242,6 +242,20 @@
         status = "okay";
 };
 
+&qspi {
+	status = "okay";
+
+	n25q128a130: flash@0 {
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <50000000>;
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+	};
+};
+
 &sai1 {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/meson.dtsi b/arch/arm/boot/dts/meson.dtsi
index 5d198309058a..ae89deaa8c9c 100644
--- a/arch/arm/boot/dts/meson.dtsi
+++ b/arch/arm/boot/dts/meson.dtsi
@@ -229,6 +229,9 @@
 			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
 			phys = <&usb0_phy>;
 			phy-names = "usb2-phy";
+			g-rx-fifo-size = <512>;
+			g-np-tx-fifo-size = <500>;
+			g-tx-fifo-size = <256 192 128 128 128>;
 			dr_mode = "host";
 			status = "disabled";
 		};
diff --git a/arch/arm/boot/dts/meson8b-odroidc1.dts b/arch/arm/boot/dts/meson8b-odroidc1.dts
index a2a47804fc4a..cb21ac9f517c 100644
--- a/arch/arm/boot/dts/meson8b-odroidc1.dts
+++ b/arch/arm/boot/dts/meson8b-odroidc1.dts
@@ -202,9 +202,8 @@
 	pinctrl-0 = <&eth_rgmii_pins>;
 	pinctrl-names = "default";
 
-	phy-mode = "rgmii";
 	phy-handle = <&eth_phy>;
-	amlogic,tx-delay-ns = <4>;
+	phy-mode = "rgmii-id";
 
 	nvmem-cells = <&ethernet_mac_address>;
 	nvmem-cell-names = "mac-address";
diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index e34b039b9357..ba36168b9c1b 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -425,8 +425,9 @@
 
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_MPLL2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
 	rx-fifo-depth = <4096>;
 	tx-fifo-depth = <2048>;
 
diff --git a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
index d54477b1001c..cc498191ddd1 100644
--- a/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
+++ b/arch/arm/boot/dts/meson8m2-mxiii-plus.dts
@@ -69,9 +69,7 @@
 	pinctrl-names = "default";
 
 	phy-handle = <&eth_phy0>;
-	phy-mode = "rgmii";
-
-	amlogic,tx-delay-ns = <4>;
+	phy-mode = "rgmii-id";
 
 	mdio {
 		compatible = "snps,dwmac-mdio";
diff --git a/arch/arm/boot/dts/meson8m2.dtsi b/arch/arm/boot/dts/meson8m2.dtsi
index 5bde7f502007..2397ba06d608 100644
--- a/arch/arm/boot/dts/meson8m2.dtsi
+++ b/arch/arm/boot/dts/meson8m2.dtsi
@@ -30,8 +30,9 @@
 		0xc1108140 0x8>;
 	clocks = <&clkc CLKID_ETH>,
 		 <&clkc CLKID_MPLL2>,
-		 <&clkc CLKID_MPLL2>;
-	clock-names = "stmmaceth", "clkin0", "clkin1";
+		 <&clkc CLKID_MPLL2>,
+		 <&clkc CLKID_FCLK_DIV2>;
+	clock-names = "stmmaceth", "clkin0", "clkin1", "timing-adjustment";
 	resets = <&reset RESET_ETHERNET>;
 	reset-names = "stmmaceth";
 };
@@ -64,6 +65,14 @@
 	compatible = "amlogic,meson8m2-saradc", "amlogic,meson-saradc";
 };
 
+&usb0_phy {
+	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
+};
+
+&usb1_phy {
+	compatible = "amlogic,meson8m2-usb2-phy", "amlogic,meson-mx-usb2-phy";
+};
+
 &wdt {
 	compatible = "amlogic,meson8m2-wdt", "amlogic,meson8b-wdt";
 };
diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi
index da10567b5aca..4306f3a6742b 100644
--- a/arch/arm/boot/dts/mmp2.dtsi
+++ b/arch/arm/boot/dts/mmp2.dtsi
@@ -364,7 +364,7 @@
 			rtc: rtc@d4010000 {
 				compatible = "mrvl,mmp-rtc";
 				reg = <0xd4010000 0x1000>;
-				interrupts = <1 0>;
+				interrupts = <1>, <0>;
 				interrupt-names = "rtc 1Hz", "rtc alarm";
 				interrupt-parent = <&intcmux5>;
 				clocks = <&soc_clocks MMP2_CLK_RTC>;
diff --git a/arch/arm/boot/dts/mmp3.dtsi b/arch/arm/boot/dts/mmp3.dtsi
index 826f0a577859..57231d49d938 100644
--- a/arch/arm/boot/dts/mmp3.dtsi
+++ b/arch/arm/boot/dts/mmp3.dtsi
@@ -183,14 +183,14 @@
 				mrvl,intc-nr-irqs = <5>;
 			};
 
-			usb_otg_phy0: usb-otg-phy@d4207000 {
+			usb_otg_phy0: usb-phy@d4207000 {
 				compatible = "marvell,mmp3-usb-phy";
 				reg = <0xd4207000 0x40>;
 				#phy-cells = <0>;
 				status = "disabled";
 			};
 
-			usb_otg0: usb-otg@d4208000 {
+			usb_otg0: usb@d4208000 {
 				compatible = "marvell,pxau2o-ehci";
 				reg = <0xd4208000 0x200>;
 				interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
@@ -201,14 +201,14 @@
 				status = "disabled";
 			};
 
-			hsic_phy0: hsic-phy@f0001800 {
+			hsic_phy0: usb-phy@f0001800 {
 				compatible = "marvell,mmp3-hsic-phy";
 				reg = <0xf0001800 0x40>;
 				#phy-cells = <0>;
 				status = "disabled";
 			};
 
-			hsic0: hsic@f0001000 {
+			hsic0: usb@f0001000 {
 				compatible = "marvell,pxau2o-ehci";
 				reg = <0xf0001000 0x200>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
@@ -222,14 +222,14 @@
 				status = "disabled";
 			};
 
-			hsic_phy1: hsic-phy@f0002800 {
+			hsic_phy1: usb-phy@f0002800 {
 				compatible = "marvell,mmp3-hsic-phy";
 				reg = <0xf0002800 0x40>;
 				#phy-cells = <0>;
 				status = "disabled";
 			};
 
-			hsic1: hsic@f0002000 {
+			hsic1: usb@f0002000 {
 				compatible = "marvell,pxau2o-ehci";
 				reg = <0xf0002000 0x200>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
@@ -279,6 +279,16 @@
 				status = "disabled";
 			};
 
+			mmc5: mmc@d4217000 {
+				compatible = "mrvl,pxav3-mmc";
+				reg = <0xd4217000 0x120>;
+				clocks = <&soc_clocks MMP3_CLK_SDH4>;
+				clock-names = "io";
+				interrupt-parent = <&hsi1_mux>;
+				interrupts = <0>;
+				status = "disabled";
+			};
+
 			camera0: camera@d420a000 {
 				compatible = "marvell,mmp2-ccic";
 				reg = <0xd420a000 0x800>;
@@ -472,7 +482,7 @@
 			rtc: rtc@d4010000 {
 				compatible = "mrvl,mmp-rtc";
 				reg = <0xd4010000 0x1000>;
-				interrupts = <1 0>;
+				interrupts = <1>, <0>;
 				interrupt-names = "rtc 1Hz", "rtc alarm";
 				interrupt-parent = <&rtc_mux>;
 				clocks = <&soc_clocks MMP2_CLK_RTC>;
@@ -521,7 +531,7 @@
 			};
 		};
 
-		l2: l2-cache-controller@d0020000 {
+		l2: cache-controller@d0020000 {
 			compatible = "marvell,tauros3-cache", "arm,pl310-cache";
 			reg = <0xd0020000 0x1000>;
 			cache-unified;
diff --git a/arch/arm/boot/dts/mt2701-evb.dts b/arch/arm/boot/dts/mt2701-evb.dts
index 88f8fd22302a..d1535f385f36 100644
--- a/arch/arm/boot/dts/mt2701-evb.dts
+++ b/arch/arm/boot/dts/mt2701-evb.dts
@@ -6,6 +6,7 @@
  */
 
 /dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
 #include "mt2701.dtsi"
 
 / {
@@ -61,6 +62,15 @@
 		>;
 		default-brightness-level = <9>;
 	};
+
+	usb_vbus: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "usb_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 45 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
 };
 
 &auxadc {
@@ -230,3 +240,14 @@
 &uart0 {
 	status = "okay";
 };
+
+&usb2 {
+	status = "okay";
+	usb-role-switch;
+	connector{
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 44 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&usb_vbus>;
+	};
+};
diff --git a/arch/arm/boot/dts/mt2701.dtsi b/arch/arm/boot/dts/mt2701.dtsi
index 2093b38d6e6d..39b3a2f4bef4 100644
--- a/arch/arm/boot/dts/mt2701.dtsi
+++ b/arch/arm/boot/dts/mt2701.dtsi
@@ -671,6 +671,39 @@
 		};
 	};
 
+	usb2: usb@11200000 {
+		compatible = "mediatek,mt2701-musb",
+			     "mediatek,mtk-musb";
+		reg = <0 0x11200000 0 0x1000>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "mc";
+		phys = <&u2port2 PHY_TYPE_USB2>;
+		dr_mode = "otg";
+		clocks = <&pericfg CLK_PERI_USB0>,
+			 <&pericfg CLK_PERI_USB0_MCU>,
+			 <&pericfg CLK_PERI_USB_SLV>;
+		clock-names = "main","mcu","univpll";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_IFR_MSC>;
+		status = "disabled";
+	};
+
+	u2phy0: usb-phy@11210000 {
+		compatible = "mediatek,generic-tphy-v1";
+		reg = <0 0x11210000 0 0x0800>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		status = "okay";
+
+		u2port2: usb-phy@1a1c4800 {
+			reg = <0 0x11210800 0 0x0100>;
+			clocks = <&topckgen CLK_TOP_USB_PHY48M>;
+			clock-names = "ref";
+			#phy-cells = <1>;
+			status = "okay";
+		};
+	};
+
 	ethsys: syscon@1b000000 {
 		compatible = "mediatek,mt2701-ethsys", "syscon";
 		reg = <0 0x1b000000 0 0x1000>;
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi
index f76b4a3c34b9..3a6b856e5b74 100644
--- a/arch/arm/boot/dts/mt7623.dtsi
+++ b/arch/arm/boot/dts/mt7623.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2017-2018 MediaTek Inc.
  * Author: John Crispin <john@phrozen.org>
  *	   Sean Wang <sean.wang@mediatek.com>
+ *	   Ryder Lee <ryder.lee@mediatek.com>
  *
  */
 
@@ -733,6 +734,30 @@
 		#reset-cells = <1>;
 	};
 
+	mali: gpu@13040000 {
+		compatible = "mediatek,mt7623-mali", "arm,mali-450";
+		reg = <0 0x13040000 0 0x30000>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 171 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 172 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 173 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 174 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 175 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 176 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 177 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 178 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 179 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_SPI 180 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "gp", "gpmmu", "pp0", "ppmmu0", "pp1",
+				  "ppmmu1", "pp2", "ppmmu2", "pp3", "ppmmu3",
+				  "pp";
+		clocks = <&topckgen CLK_TOP_MMPLL>,
+			 <&g3dsys CLK_G3DSYS_CORE>;
+		clock-names = "bus", "core";
+		power-domains = <&scpsys MT2701_POWER_DOMAIN_MFG>;
+		resets = <&g3dsys MT2701_G3DSYS_CORE_RST>;
+	};
+
 	mmsys: syscon@14000000 {
 		compatible = "mediatek,mt7623-mmsys",
 			     "mediatek,mt2701-mmsys",
diff --git a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
index b7606130ade9..0447748f9fa0 100644
--- a/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
+++ b/arch/arm/boot/dts/mt7623n-rfb-emmc.dts
@@ -138,6 +138,7 @@
 	mac@1 {
 		compatible = "mediatek,eth-mac";
 		reg = <1>;
+		phy-mode = "rgmii";
 		phy-handle = <&phy5>;
 	};
 
diff --git a/arch/arm/boot/dts/omap5-l4.dtsi b/arch/arm/boot/dts/omap5-l4.dtsi
index a7e718c4ccea..5217805bf126 100644
--- a/arch/arm/boot/dts/omap5-l4.dtsi
+++ b/arch/arm/boot/dts/omap5-l4.dtsi
@@ -1003,6 +1003,7 @@
 			 <0x00090000 0x00090000 0x002000>,	/* ap 55 */
 			 <0x00092000 0x00092000 0x001000>,	/* ap 56 */
 			 <0x000a4000 0x000a4000 0x001000>,	/* ap 57 */
+			 <0x000a5000 0x000a5000 0x001000>,
 			 <0x000a6000 0x000a6000 0x001000>,	/* ap 58 */
 			 <0x000a8000 0x000a8000 0x004000>,	/* ap 59 */
 			 <0x000ac000 0x000ac000 0x001000>,	/* ap 60 */
@@ -1908,6 +1909,36 @@
 				 <0x00001000 0x000a5000 0x00001000>;
 		};
 
+		des_target: target-module@a5000 {	/* 0x480a5000 */
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0xa5030 0x4>,
+			      <0xa5034 0x4>,
+			      <0xa5038 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_DES3DES_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0xa5000 0x00001000>;
+			status = "disabled";
+
+			des: des@0 {
+				compatible = "ti,omap4-des";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 117>, <&sdma 116>;
+				dma-names = "tx", "rx";
+			};
+		};
+
 		target-module@a8000 {			/* 0x480a8000, ap 59 2a.0 */
 			compatible = "ti,sysc";
 			status = "disabled";
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index e30a556f7c18..fb889c5b00c9 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -247,6 +247,92 @@
 			hw-caps-temp-alert;
 		};
 
+		aes1_target: target-module@4b501000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b501080 0x4>,
+			      <0x4b501084 0x4>,
+			      <0x4b501088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_AES1_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b501000 0x1000>;
+
+			aes1: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 111>, <&sdma 110>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		aes2_target: target-module@4b701000 {
+			compatible = "ti,sysc-omap2", "ti,sysc";
+			reg = <0x4b701080 0x4>,
+			      <0x4b701084 0x4>,
+			      <0x4b701088 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>,
+					<SYSC_IDLE_SMART_WKUP>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_AES2_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b701000 0x1000>;
+
+			aes2: aes@0 {
+				compatible = "ti,omap4-aes";
+				reg = <0 0xa0>;
+				interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 114>, <&sdma 113>;
+				dma-names = "tx", "rx";
+			};
+		};
+
+		sham_target: target-module@4b100000 {
+			compatible = "ti,sysc-omap3-sham", "ti,sysc";
+			reg = <0x4b100100 0x4>,
+			      <0x4b100110 0x4>,
+			      <0x4b100114 0x4>;
+			reg-names = "rev", "sysc", "syss";
+			ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
+					 SYSC_OMAP2_AUTOIDLE)>;
+			ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+					<SYSC_IDLE_NO>,
+					<SYSC_IDLE_SMART>;
+			ti,syss-mask = <1>;
+			/* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
+			clocks = <&l4sec_clkctrl OMAP5_SHA2MD5_CLKCTRL 0>;
+			clock-names = "fck";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x4b100000 0x1000>;
+
+			sham: sham@0 {
+				compatible = "ti,omap4-sham";
+				reg = <0 0x300>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				dmas = <&sdma 119>;
+				dma-names = "rx";
+			};
+		};
+
 		bandgap: bandgap@4a0021e0 {
 			reg = <0x4a0021e0 0xc
 			       0x4a00232c 0xc
diff --git a/arch/arm/boot/dts/pxa168.dtsi b/arch/arm/boot/dts/pxa168.dtsi
index 9a9e38245e88..4fe7735c7c58 100644
--- a/arch/arm/boot/dts/pxa168.dtsi
+++ b/arch/arm/boot/dts/pxa168.dtsi
@@ -97,7 +97,7 @@
 				resets = <&soc_clocks PXA168_CLK_GPIO>;
 				interrupt-names = "gpio_mux";
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 				ranges;
 
 				gcb0: gpio@d4019000 {
@@ -119,6 +119,8 @@
 
 			twsi1: i2c@d4011000 {
 				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xd4011000 0x1000>;
 				interrupts = <7>;
 				clocks = <&soc_clocks PXA168_CLK_TWSI0>;
@@ -129,6 +131,8 @@
 
 			twsi2: i2c@d4025000 {
 				compatible = "mrvl,mmp-twsi";
+				#address-cells = <1>;
+				#size-cells = <0>;
 				reg = <0xd4025000 0x1000>;
 				interrupts = <58>;
 				clocks = <&soc_clocks PXA168_CLK_TWSI1>;
@@ -139,7 +143,7 @@
 			rtc: rtc@d4010000 {
 				compatible = "mrvl,mmp-rtc";
 				reg = <0xd4010000 0x1000>;
-				interrupts = <5 6>;
+				interrupts = <5>, <6>;
 				interrupt-names = "rtc 1Hz", "rtc alarm";
 				clocks = <&soc_clocks PXA168_CLK_RTC>;
 				resets = <&soc_clocks PXA168_CLK_RTC>;
diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi
index c237a0e4b12a..d19674812cd2 100644
--- a/arch/arm/boot/dts/pxa3xx.dtsi
+++ b/arch/arm/boot/dts/pxa3xx.dtsi
@@ -170,7 +170,7 @@
 			clocks = <&clks CLK_GPIO>;
 			gpio-ranges = <&pinctrl 0 0 128>;
 			interrupt-names = "gpio0", "gpio1", "gpio_mux";
-			interrupts = <8 9 10>;
+			interrupts = <8>, <9>, <10>;
 			gpio-controller;
 			#gpio-cells = <0x2>;
 			interrupt-controller;
diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi
index 587a5e7f0702..352a39357810 100644
--- a/arch/arm/boot/dts/pxa910.dtsi
+++ b/arch/arm/boot/dts/pxa910.dtsi
@@ -109,7 +109,7 @@
 				clocks = <&soc_clocks PXA910_CLK_GPIO>;
 				resets = <&soc_clocks PXA910_CLK_GPIO>;
 				interrupt-controller;
-				#interrupt-cells = <1>;
+				#interrupt-cells = <2>;
 				ranges;
 
 				gcb0: gpio@d4019000 {
@@ -155,7 +155,7 @@
 			rtc: rtc@d4010000 {
 				compatible = "mrvl,mmp-rtc";
 				reg = <0xd4010000 0x1000>;
-				interrupts = <5 6>;
+				interrupts = <5>, <6>;
 				interrupt-names = "rtc 1Hz", "rtc alarm";
 				clocks = <&soc_clocks PXA910_CLK_RTC>;
 				resets = <&soc_clocks PXA910_CLK_RTC>;
diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
index b9839f86e703..74d8e2c8e4b3 100644
--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
@@ -166,6 +166,7 @@
 			     <1 4 0xf08>,
 			     <1 1 0xf08>;
 		clock-frequency = <48000000>;
+		always-on;
 	};
 
 	soc {
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 4021f661cd11..b912da9a3ff3 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -93,6 +93,12 @@
 		};
 	};
 
+	firmware {
+		scm {
+			compatible = "qcom,scm-ipq806x", "qcom,scm";
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
index eaa1001d0a46..d4dc98214225 100644
--- a/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
+++ b/arch/arm/boot/dts/qcom-msm8974-samsung-klte.dts
@@ -1,7 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 #include "qcom-msm8974pro.dtsi"
-#include "qcom-pm8841.dtsi"
-#include "qcom-pm8941.dtsi"
+#include "qcom-pma8084.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
 / {
 	model = "Samsung Galaxy S5";
@@ -14,6 +16,194 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	smd {
+		rpm {
+			rpm_requests {
+				pma8084-regulators {
+					compatible = "qcom,rpm-pma8084-regulators";
+					status = "okay";
+
+					pma8084_s1: s1 {
+						regulator-min-microvolt = <675000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					pma8084_s2: s2 {
+						regulator-min-microvolt = <500000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					pma8084_s3: s3 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					pma8084_s4: s4 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_s5: s5 {
+						regulator-min-microvolt = <2150000>;
+						regulator-max-microvolt = <2150000>;
+					};
+
+					pma8084_s6: s6 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1050000>;
+					};
+
+					pma8084_l1: l1 {
+						regulator-min-microvolt = <1225000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					pma8084_l2: l2 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					pma8084_l3: l3 {
+						regulator-min-microvolt = <1050000>;
+						regulator-max-microvolt = <1200000>;
+					};
+
+					pma8084_l4: l4 {
+						regulator-min-microvolt = <1200000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					pma8084_l5: l5 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l6: l6 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l7: l7 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l8: l8 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l9: l9 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					pma8084_l10: l10 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					pma8084_l11: l11 {
+						regulator-min-microvolt = <1300000>;
+						regulator-max-microvolt = <1300000>;
+					};
+
+					pma8084_l12: l12 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l13: l13 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					pma8084_l14: l14 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <1800000>;
+					};
+
+					pma8084_l15: l15 {
+						regulator-min-microvolt = <2050000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					pma8084_l16: l16 {
+						regulator-min-microvolt = <2700000>;
+						regulator-max-microvolt = <2700000>;
+					};
+
+					pma8084_l17: l17 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					pma8084_l18: l18 {
+						regulator-min-microvolt = <2850000>;
+						regulator-max-microvolt = <2850000>;
+					};
+
+					pma8084_l19: l19 {
+						regulator-min-microvolt = <2900000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					pma8084_l20: l20 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+
+						regulator-allow-set-load;
+						regulator-system-load = <200000>;
+					};
+
+					pma8084_l21: l21 {
+						regulator-min-microvolt = <2950000>;
+						regulator-max-microvolt = <2950000>;
+					};
+
+					pma8084_l22: l22 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3300000>;
+					};
+
+					pma8084_l23: l23 {
+						regulator-min-microvolt = <3000000>;
+						regulator-max-microvolt = <3000000>;
+					};
+
+					pma8084_l24: l24 {
+						regulator-min-microvolt = <3075000>;
+						regulator-max-microvolt = <3075000>;
+					};
+
+					pma8084_l25: l25 {
+						regulator-min-microvolt = <2100000>;
+						regulator-max-microvolt = <2100000>;
+					};
+
+					pma8084_l26: l26 {
+						regulator-min-microvolt = <1800000>;
+						regulator-max-microvolt = <2050000>;
+					};
+
+					pma8084_l27: l27 {
+						regulator-min-microvolt = <1000000>;
+						regulator-max-microvolt = <1225000>;
+					};
+
+					pma8084_lvs1: lvs1 {};
+					pma8084_lvs2: lvs2 {};
+					pma8084_lvs3: lvs3 {};
+					pma8084_lvs4: lvs4 {};
+
+					pma8084_5vs1: 5vs1 {};
+				};
+			};
+		};
+	};
+
+	/delete-node/ vreg-boost;
 };
 
 &soc {
@@ -21,4 +211,215 @@
 		status = "ok";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys_pin_a>;
+
+		volume-down {
+			label = "volume_down";
+			gpios = <&pma8084_gpios 2 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <15>;
+		};
+
+		home-key {
+			label = "home_key";
+			gpios = <&pma8084_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_HOMEPAGE>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+
+		volume-up {
+			label = "volume_up";
+			gpios = <&pma8084_gpios 5 GPIO_ACTIVE_LOW>;
+			linux,input-type = <1>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	pinctrl@fd510000 {
+		sdhc1_pin_a: sdhc1-pin-active {
+			clk {
+				pins = "sdc1_clk";
+				drive-strength = <4>;
+				bias-disable;
+			};
+
+			cmd-data {
+				pins = "sdc1_cmd", "sdc1_data";
+				drive-strength = <4>;
+				bias-pull-up;
+			};
+		};
+	};
+
+	sdhci@f9824900 {
+		status = "ok";
+
+		vmmc-supply = <&pma8084_l20>;
+		vqmmc-supply = <&pma8084_s4>;
+
+		bus-width = <8>;
+		non-removable;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdhc1_pin_a>;
+	};
+
+	usb@f9a55000 {
+		status = "ok";
+
+		phys = <&usb_hs1_phy>;
+		phy-select = <&tcsr 0xb000 0>;
+		/*extcon = <&smbb>, <&usb_id>;*/
+		/*vbus-supply = <&chg_otg>;*/
+
+		hnp-disable;
+		srp-disable;
+		adp-disable;
+
+		ulpi {
+			phy@a {
+				status = "ok";
+
+				v1p8-supply = <&pma8084_l6>;
+				v3p3-supply = <&pma8084_l24>;
+
+				/*extcon = <&smbb>;*/
+				qcom,init-seq = /bits/ 8 <0x1 0x64>;
+			};
+		};
+	};
+
+	pinctrl@fd510000 {
+		i2c6_pins: i2c6 {
+			mux {
+				pins = "gpio29", "gpio30";
+				function = "blsp_i2c6";
+
+				drive-strength = <2>;
+				bias-disable;
+			};
+		};
+	};
+
+	i2c@f9928000 {
+		status = "okay";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c6_pins>;
+
+		pmic@60 {
+			reg = <0x60>;
+			compatible = "maxim,max77826";
+
+			regulators {
+				max77826_ldo1: LDO1 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				max77826_ldo2: LDO2 {
+					regulator-min-microvolt = <1000000>;
+					regulator-max-microvolt = <1000000>;
+				};
+
+				max77826_ldo3: LDO3 {
+					regulator-min-microvolt = <1200000>;
+					regulator-max-microvolt = <1200000>;
+				};
+
+				max77826_ldo4: LDO4 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_ldo5: LDO5 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_ldo6: LDO6 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo7: LDO7 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_ldo8: LDO8 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo9: LDO9 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_ldo10: LDO10 {
+					regulator-min-microvolt = <2800000>;
+					regulator-max-microvolt = <2950000>;
+				};
+
+				max77826_ldo11: LDO11 {
+					regulator-min-microvolt = <2700000>;
+					regulator-max-microvolt = <2950000>;
+				};
+
+				max77826_ldo12: LDO12 {
+					regulator-min-microvolt = <2500000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo13: LDO13 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo14: LDO14 {
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				max77826_ldo15: LDO15 {
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				max77826_buck: BUCK {
+					regulator-min-microvolt = <1225000>;
+					regulator-max-microvolt = <1225000>;
+				};
+
+				max77826_buckboost: BUCKBOOST {
+					regulator-min-microvolt = <3400000>;
+					regulator-max-microvolt = <3400000>;
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pma8084@0 {
+		gpios@c000 {
+			gpio_keys_pin_a: gpio-keys-active {
+				pins = "gpio2", "gpio3", "gpio5";
+				function = "normal";
+
+				bias-pull-up;
+				power-source = <PMA8084_GPIO_S4>;
+			};
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index 2ea2308d91b3..51f5f904f9eb 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -974,6 +974,17 @@
 			#size-cells = <0>;
 		};
 
+		blsp_i2c6: i2c@f9928000 {
+			status = "disabled";
+			compatible = "qcom,i2c-qup-v2.1.1";
+			reg = <0xf9928000 0x1000>;
+			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
 		blsp_i2c8: i2c@f9964000 {
 			status = "disabled";
 			compatible = "qcom,i2c-qup-v2.1.1";
diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi
index 90feb2cf9960..0588d4446f9a 100644
--- a/arch/arm/boot/dts/r8a7740.dtsi
+++ b/arch/arm/boot/dts/r8a7740.dtsi
@@ -83,7 +83,7 @@
 	};
 
 	cmt1: timer@e6138000 {
-		compatible = "renesas,cmt-48-r8a7740", "renesas,cmt-48";
+		compatible = "renesas,r8a7740-cmt1";
 		reg = <0xe6138000 0x170>;
 		interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks R8A7740_CLK_CMT1>;
diff --git a/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
new file mode 100644
index 000000000000..1f5c35c66d91
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21d-q7.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave-RZ/G1H Qseven board
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a7742-iwg21m.dtsi"
+
+/ {
+	model = "iWave Systems RainboW-G21D-Qseven board based on RZ/G1H";
+	compatible = "iwave,g21d", "iwave,g21m", "renesas,r8a7742";
+
+	aliases {
+		serial2 = &scifa2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel root=/dev/mmcblk0p1 rw rootwait";
+		stdout-path = "serial2:115200n8";
+	};
+};
+
+&pfc {
+	scifa2_pins: scifa2 {
+		groups = "scifa2_data_c";
+		function = "scifa2";
+	};
+};
+
+&scifa2 {
+	pinctrl-0 = <&scifa2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7742-iwg21m.dtsi b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
new file mode 100644
index 000000000000..85aff429d408
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742-iwg21m.dtsi
@@ -0,0 +1,53 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the iWave RZ/G1H Qseven SOM
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include "r8a7742.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	compatible = "iwave,g21m", "renesas,r8a7742";
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0x40000000>;
+	};
+
+	memory@200000000 {
+		device_type = "memory";
+		reg = <2 0x00000000 0 0x40000000>;
+	};
+
+	reg_3p3v: 3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <20000000>;
+};
+
+&pfc {
+	mmc1_pins: mmc1 {
+		groups = "mmc1_data4", "mmc1_ctrl";
+		function = "mmc1";
+	};
+};
+
+&mmcif1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&reg_3p3v>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/r8a7742.dtsi b/arch/arm/boot/dts/r8a7742.dtsi
new file mode 100644
index 000000000000..305d8086a3dd
--- /dev/null
+++ b/arch/arm/boot/dts/r8a7742.dtsi
@@ -0,0 +1,648 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the r8a7742 SoC
+ *
+ * Copyright (C) 2020 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/r8a7742-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/power/r8a7742-sysc.h>
+
+/ {
+	compatible = "renesas,r8a7742";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <0>;
+			clock-frequency = <1400000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
+			power-domains = <&sysc R8A7742_PD_CA15_CPU0>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <1>;
+			clock-frequency = <1400000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
+			power-domains = <&sysc R8A7742_PD_CA15_CPU1>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <2>;
+			clock-frequency = <1400000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
+			power-domains = <&sysc R8A7742_PD_CA15_CPU2>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a15";
+			reg = <3>;
+			clock-frequency = <1400000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z>;
+			power-domains = <&sysc R8A7742_PD_CA15_CPU3>;
+			next-level-cache = <&L2_CA15>;
+			capacity-dmips-mhz = <1024>;
+			voltage-tolerance = <1>; /* 1% */
+			clock-latency = <300000>; /* 300 us */
+
+			/* kHz - uV - OPPs unknown yet */
+			operating-points = <1400000 1000000>,
+					   <1225000 1000000>,
+					   <1050000 1000000>,
+					   < 875000 1000000>,
+					   < 700000 1000000>,
+					   < 350000 1000000>;
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x100>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>;
+			power-domains = <&sysc R8A7742_PD_CA7_CPU0>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x101>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>;
+			power-domains = <&sysc R8A7742_PD_CA7_CPU1>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x102>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>;
+			power-domains = <&sysc R8A7742_PD_CA7_CPU2>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x103>;
+			clock-frequency = <780000000>;
+			clocks = <&cpg CPG_CORE R8A7742_CLK_Z2>;
+			power-domains = <&sysc R8A7742_PD_CA7_CPU3>;
+			next-level-cache = <&L2_CA7>;
+		};
+
+		L2_CA15: cache-controller-0 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7742_PD_CA15_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+
+		L2_CA7: cache-controller-1 {
+			compatible = "cache";
+			power-domains = <&sysc R8A7742_PD_CA7_SCU>;
+			cache-unified;
+			cache-level = <2>;
+		};
+	};
+
+	/* External root clock */
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	pmu-0 {
+		compatible = "arm,cortex-a15-pmu";
+		interrupts-extended = <&gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	pmu-1 {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts-extended = <&gic GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				      <&gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>, <&cpu5>, <&cpu6>, <&cpu7>;
+	};
+
+	/* External SCIF clock */
+	scif_clk: scif {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board. */
+		clock-frequency = <0>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpio0: gpio@e6050000 {
+			compatible = "renesas,gpio-r8a7742",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6050000 0 0x50>;
+			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 0 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 912>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 912>;
+		};
+
+		gpio1: gpio@e6051000 {
+			compatible = "renesas,gpio-r8a7742",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6051000 0 0x50>;
+			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 32 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 911>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 911>;
+		};
+
+		gpio2: gpio@e6052000 {
+			compatible = "renesas,gpio-r8a7742",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6052000 0 0x50>;
+			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 64 30>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 910>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 910>;
+		};
+
+		gpio3: gpio@e6053000 {
+			compatible = "renesas,gpio-r8a7742",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6053000 0 0x50>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 96 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 909>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 909>;
+		};
+
+		gpio4: gpio@e6054000 {
+			compatible = "renesas,gpio-r8a7742",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6054000 0 0x50>;
+			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 128 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 908>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 908>;
+		};
+
+		gpio5: gpio@e6055000 {
+			compatible = "renesas,gpio-r8a7742",
+				     "renesas,rcar-gen2-gpio";
+			reg = <0 0xe6055000 0 0x50>;
+			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			gpio-ranges = <&pfc 0 160 32>;
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			clocks = <&cpg CPG_MOD 907>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 907>;
+		};
+
+		pfc: pin-controller@e6060000 {
+			compatible = "renesas,pfc-r8a7742";
+			reg = <0 0xe6060000 0 0x250>;
+		};
+
+		cpg: clock-controller@e6150000 {
+			compatible = "renesas,r8a7742-cpg-mssr";
+			reg = <0 0xe6150000 0 0x1000>;
+			clocks = <&extal_clk>, <&usb_extal_clk>;
+			clock-names = "extal", "usb_extal";
+			#clock-cells = <2>;
+			#power-domain-cells = <0>;
+			#reset-cells = <1>;
+		};
+
+		rst: reset-controller@e6160000 {
+			compatible = "renesas,r8a7742-rst";
+			reg = <0 0xe6160000 0 0x0100>;
+		};
+
+		sysc: system-controller@e6180000 {
+			compatible = "renesas,r8a7742-sysc";
+			reg = <0 0xe6180000 0 0x0200>;
+			#power-domain-cells = <1>;
+		};
+
+		irqc: interrupt-controller@e61c0000 {
+			compatible = "renesas,irqc-r8a7742", "renesas,irqc";
+			#interrupt-cells = <2>;
+			interrupt-controller;
+			reg = <0 0xe61c0000 0 0x200>;
+			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 407>;
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 407>;
+		};
+
+		icram0: sram@e63a0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63a0000 0 0x12000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63a0000 0x12000>;
+		};
+
+		icram1: sram@e63c0000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe63c0000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe63c0000 0x1000>;
+
+			smp-sram@0 {
+				compatible = "renesas,smp-sram";
+				reg = <0 0x100>;
+			};
+		};
+
+		icram2: sram@e6300000 {
+			compatible = "mmio-sram";
+			reg = <0 0xe6300000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0 0xe6300000 0x40000>;
+		};
+
+		dmac0: dma-controller@e6700000 {
+			compatible = "renesas,dmac-r8a7742",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6700000 0 0x20000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 219>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 219>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		dmac1: dma-controller@e6720000 {
+			compatible = "renesas,dmac-r8a7742",
+				     "renesas,rcar-dmac";
+			reg = <0 0xe6720000 0 0x20000>;
+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14";
+			clocks = <&cpg CPG_MOD 218>;
+			clock-names = "fck";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 218>;
+			#dma-cells = <1>;
+			dma-channels = <15>;
+		};
+
+		scifa0: serial@e6c40000 {
+			compatible = "renesas,scifa-r8a7742",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c40000 0 0x40>;
+			interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 204>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x21>, <&dmac0 0x22>,
+			       <&dmac1 0x21>, <&dmac1 0x22>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 204>;
+			status = "disabled";
+		};
+
+		scifa1: serial@e6c50000 {
+			compatible = "renesas,scifa-r8a7742",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c50000 0 0x40>;
+			interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 203>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x25>, <&dmac0 0x26>,
+			       <&dmac1 0x25>, <&dmac1 0x26>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 203>;
+			status = "disabled";
+		};
+
+		scifa2: serial@e6c60000 {
+			compatible = "renesas,scifa-r8a7742",
+				     "renesas,rcar-gen2-scifa", "renesas,scifa";
+			reg = <0 0xe6c60000 0 0x40>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 202>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x27>, <&dmac0 0x28>,
+			       <&dmac1 0x27>, <&dmac1 0x28>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 202>;
+			status = "disabled";
+		};
+
+		scifb0: serial@e6c20000 {
+			compatible = "renesas,scifb-r8a7742",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c20000 0 0x100>;
+			interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 206>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x3d>, <&dmac0 0x3e>,
+			       <&dmac1 0x3d>, <&dmac1 0x3e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 206>;
+			status = "disabled";
+		};
+
+		scifb1: serial@e6c30000 {
+			compatible = "renesas,scifb-r8a7742",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6c30000 0 0x100>;
+			interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 207>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x19>, <&dmac0 0x1a>,
+			       <&dmac1 0x19>, <&dmac1 0x1a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 207>;
+			status = "disabled";
+		};
+
+		scifb2: serial@e6ce0000 {
+			compatible = "renesas,scifb-r8a7742",
+				     "renesas,rcar-gen2-scifb", "renesas,scifb";
+			reg = <0 0xe6ce0000 0 0x100>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 216>;
+			clock-names = "fck";
+			dmas = <&dmac0 0x1d>, <&dmac0 0x1e>,
+			       <&dmac1 0x1d>, <&dmac1 0x1e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 216>;
+			status = "disabled";
+		};
+
+		scif0: serial@e6e60000 {
+			compatible = "renesas,scif-r8a7742",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e60000 0 0x40>;
+			interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 721>,
+				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x29>, <&dmac0 0x2a>,
+			       <&dmac1 0x29>, <&dmac1 0x2a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 721>;
+			status = "disabled";
+		};
+
+		scif1: serial@e6e68000 {
+			compatible = "renesas,scif-r8a7742",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e68000 0 0x40>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 720>,
+				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2d>, <&dmac0 0x2e>,
+			       <&dmac1 0x2d>, <&dmac1 0x2e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 720>;
+			status = "disabled";
+		};
+
+		scif2: serial@e6e56000 {
+			compatible = "renesas,scif-r8a7742",
+				     "renesas,rcar-gen2-scif", "renesas,scif";
+			reg = <0 0xe6e56000 0 0x40>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 310>,
+				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x2b>, <&dmac0 0x2c>,
+			       <&dmac1 0x2b>, <&dmac1 0x2c>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 310>;
+			status = "disabled";
+		};
+
+		hscif0: serial@e62c0000 {
+			compatible = "renesas,hscif-r8a7742",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c0000 0 0x60>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 717>,
+				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x39>, <&dmac0 0x3a>,
+			       <&dmac1 0x39>, <&dmac1 0x3a>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 717>;
+			status = "disabled";
+		};
+
+		hscif1: serial@e62c8000 {
+			compatible = "renesas,hscif-r8a7742",
+				     "renesas,rcar-gen2-hscif", "renesas,hscif";
+			reg = <0 0xe62c8000 0 0x60>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 716>,
+				 <&cpg CPG_CORE R8A7742_CLK_ZS>, <&scif_clk>;
+			clock-names = "fck", "brg_int", "scif_clk";
+			dmas = <&dmac0 0x4d>, <&dmac0 0x4e>,
+			       <&dmac1 0x4d>, <&dmac1 0x4e>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 716>;
+			status = "disabled";
+		};
+
+		mmcif1: mmc@ee220000 {
+			compatible = "renesas,mmcif-r8a7742",
+				     "renesas,sh-mmcif";
+			reg = <0 0xee220000 0 0x80>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 305>;
+			dmas = <&dmac0 0xe1>, <&dmac0 0xe2>,
+			       <&dmac1 0xe1>, <&dmac1 0xe2>;
+			dma-names = "tx", "rx", "tx", "rx";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 305>;
+			reg-io-width = <4>;
+			status = "disabled";
+			max-frequency = <97500000>;
+		};
+
+		gic: interrupt-controller@f1001000 {
+			compatible = "arm,gic-400";
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			reg = <0 0xf1001000 0 0x1000>, <0 0xf1002000 0 0x2000>,
+			      <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
+			clocks = <&cpg CPG_MOD 408>;
+			clock-names = "clk";
+			power-domains = <&sysc R8A7742_PD_ALWAYS_ON>;
+			resets = <&cpg 408>;
+		};
+
+		prr: chipid@ff000044 {
+			compatible = "renesas,prr";
+			reg = <0 0xff000044 0 4>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+				      <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+
+	/* External USB clock - can be overridden by the board */
+	usb_extal_clk: usb_extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <48000000>;
+	};
+};
diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
index e8b340bb99bc..fff123753b85 100644
--- a/arch/arm/boot/dts/r8a7743.dtsi
+++ b/arch/arm/boot/dts/r8a7743.dtsi
@@ -338,7 +338,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -376,7 +376,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -386,7 +386,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index def840b8b2d3..5050ac19041d 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -338,7 +338,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -376,7 +376,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -386,7 +386,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7744",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index 7ab58d8bb740..b0d1fc24e97e 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -302,7 +302,7 @@
 			resets = <&cpg 407>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -312,7 +312,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -321,7 +321,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -331,7 +331,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -340,7 +340,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -350,7 +350,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7745",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi
index e5ef9fd4284a..166d5566229d 100644
--- a/arch/arm/boot/dts/r8a7790.dtsi
+++ b/arch/arm/boot/dts/r8a7790.dtsi
@@ -427,7 +427,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -437,7 +437,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -446,7 +446,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -456,7 +456,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -465,7 +465,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -475,7 +475,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7790",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xffc80000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi
index 6e5bd86731cd..225676fbe312 100644
--- a/arch/arm/boot/dts/r8a7791.dtsi
+++ b/arch/arm/boot/dts/r8a7791.dtsi
@@ -291,6 +291,17 @@
 			reg = <0 0xe6060000 0 0x250>;
 		};
 
+		tpu: pwm@e60f0000 {
+			compatible = "renesas,tpu-r8a7791", "renesas,tpu";
+			reg = <0 0xe60f0000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		cpg: clock-controller@e6150000 {
 			compatible = "renesas,r8a7791-cpg-mssr";
 			reg = <0 0xe6150000 0 0x1000>;
@@ -350,7 +361,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -360,7 +371,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -369,7 +380,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -379,7 +390,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -388,7 +399,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -398,7 +409,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xffc80000 0 0x1000>;
@@ -407,7 +418,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7791",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
@@ -1067,6 +1078,76 @@
 			status = "disabled";
 		};
 
+		pwm0: pwm@e6e30000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e30000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm1: pwm@e6e31000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e31000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm2: pwm@e6e32000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e32000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm3: pwm@e6e33000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e33000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm4: pwm@e6e34000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e34000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm5: pwm@e6e35000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e35000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
+		pwm6: pwm@e6e36000 {
+			compatible = "renesas,pwm-r8a7791", "renesas,pwm-rcar";
+			reg = <0 0xe6e36000 0 0x8>;
+			clocks = <&cpg CPG_MOD 523>;
+			power-domains = <&sysc R8A7791_PD_ALWAYS_ON>;
+			resets = <&cpg 523>;
+			#pwm-cells = <2>;
+			status = "disabled";
+		};
+
 		adc: adc@e6e54000 {
 			compatible = "renesas,r8a7791-gyroadc",
 				     "renesas,rcar-gyroadc";
diff --git a/arch/arm/boot/dts/r8a7793.dtsi b/arch/arm/boot/dts/r8a7793.dtsi
index dadbda16161b..1b62a7e06b42 100644
--- a/arch/arm/boot/dts/r8a7793.dtsi
+++ b/arch/arm/boot/dts/r8a7793.dtsi
@@ -336,7 +336,7 @@
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -346,7 +346,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -355,7 +355,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -365,7 +365,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -374,7 +374,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -384,7 +384,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_rt: mmu@ffc80000 {
+		ipmmu_rt: iommu@ffc80000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xffc80000 0 0x1000>;
@@ -393,7 +393,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7793",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/r8a7794.dtsi b/arch/arm/boot/dts/r8a7794.dtsi
index 2c9e7a1ebfec..8d7f8798628a 100644
--- a/arch/arm/boot/dts/r8a7794.dtsi
+++ b/arch/arm/boot/dts/r8a7794.dtsi
@@ -290,7 +290,7 @@
 			resets = <&cpg 407>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -300,7 +300,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -309,7 +309,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -319,7 +319,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mp: mmu@ec680000 {
+		ipmmu_mp: iommu@ec680000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xec680000 0 0x1000>;
@@ -328,7 +328,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_mx: mmu@fe951000 {
+		ipmmu_mx: iommu@fe951000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xfe951000 0 0x1000>;
@@ -338,7 +338,7 @@
 			status = "disabled";
 		};
 
-		ipmmu_gp: mmu@e62a0000 {
+		ipmmu_gp: iommu@e62a0000 {
 			compatible = "renesas,ipmmu-r8a7794",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe62a0000 0 0x1000>;
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 2ff9f152d29b..7154b827ea2f 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -16,7 +16,7 @@
 	leds: gpio-leds {
 		compatible = "gpio-leds";
 
-		work {
+		work_led: led-0 {
 			gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
 			label = "kylin:red:led";
 			pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts
index 365eff621113..eed9e60cffa2 100644
--- a/arch/arm/boot/dts/rk3066a-mk808.dts
+++ b/arch/arm/boot/dts/rk3066a-mk808.dts
@@ -22,7 +22,7 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		blue {
+		blue_led: led-0 {
 			label = "mk808:blue:power";
 			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts
index c9a7f5409960..b0fef82c0a71 100644
--- a/arch/arm/boot/dts/rk3188-radxarock.dts
+++ b/arch/arm/boot/dts/rk3188-radxarock.dts
@@ -33,19 +33,19 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		green {
+		green_led: led-0 {
 			label = "rock:green:user1";
 			gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		blue {
+		blue_led: led-1 {
 			label = "rock:blue:user2";
 			gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>;
 			default-state = "off";
 		};
 
-		sleep {
+		sleep_led: led-2 {
 			label = "rock:red:power";
 			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/rk3229-xms6.dts b/arch/arm/boot/dts/rk3229-xms6.dts
index 933ef69da32a..263393ac4fa6 100644
--- a/arch/arm/boot/dts/rk3229-xms6.dts
+++ b/arch/arm/boot/dts/rk3229-xms6.dts
@@ -33,12 +33,18 @@
 	power-led {
 		compatible = "gpio-leds";
 
-		blue {
+		blue_led: led-0 {
 			gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
 			default-state = "on";
 		};
 	};
 
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 26 GPIO_ACTIVE_LOW>,
+		              <&gpio2 29 GPIO_ACTIVE_LOW>;
+	};
+
 	vcc_host: vcc-host-regulator {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -131,7 +137,6 @@
 
 &emmc {
 	cap-mmc-highspeed;
-	disable-wp;
 	non-removable;
 	status = "okay";
 };
@@ -202,6 +207,16 @@
 	status = "okay";
 };
 
+&sdio {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	vqmmc-supply = <&vccio_1v8>;
+	status = "okay";
+};
+
 &sdmmc {
 	cap-mmc-highspeed;
 	disable-wp;
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi
index 5485a9918da6..b0fd92befdeb 100644
--- a/arch/arm/boot/dts/rk322x.dtsi
+++ b/arch/arm/boot/dts/rk322x.dtsi
@@ -615,6 +615,16 @@
 		status = "disabled";
 	};
 
+	rga: rga@20060000 {
+		compatible = "rockchip,rk3228-rga", "rockchip,rk3288-rga";
+		reg = <0x20060000 0x1000>;
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>;
+		clock-names = "aclk", "hclk", "sclk";
+		resets = <&cru SRST_RGA>, <&cru SRST_RGA_A>, <&cru SRST_RGA_H>;
+		reset-names = "core", "axi", "ahb";
+	};
+
 	iep_mmu: iommu@20070800 {
 		compatible = "rockchip,iommu";
 		reg = <0x20070800 0x100>;
diff --git a/arch/arm/boot/dts/rk3288-firefly-reload.dts b/arch/arm/boot/dts/rk3288-firefly-reload.dts
index 8c38bda21a7c..9a4a9749c405 100644
--- a/arch/arm/boot/dts/rk3288-firefly-reload.dts
+++ b/arch/arm/boot/dts/rk3288-firefly-reload.dts
@@ -45,20 +45,20 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power {
+		power_led: led-0 {
 			gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
 			label = "firefly:blue:power";
 			pinctrl-names = "default";
-			pinctrl-0 = <&power_led>;
+			pinctrl-0 = <&power_led_pin>;
 			panic-indicator;
 		};
 
-		work {
+		work_led: led-1 {
 			gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
 			label = "firefly:blue:user";
 			linux,default-trigger = "rc-feedback";
 			pinctrl-names = "default";
-			pinctrl-0 = <&work_led>;
+			pinctrl-0 = <&work_led_pin>;
 		};
 	};
 
@@ -334,11 +334,11 @@
 	};
 
 	leds {
-		power_led: power-led {
+		power_led_pin: power-led-pin {
 			rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		work_led: work-led {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
diff --git a/arch/arm/boot/dts/rk3288-firefly.dtsi b/arch/arm/boot/dts/rk3288-firefly.dtsi
index 5e0a19004e46..e5c4fd4ea67e 100644
--- a/arch/arm/boot/dts/rk3288-firefly.dtsi
+++ b/arch/arm/boot/dts/rk3288-firefly.dtsi
@@ -62,20 +62,20 @@
 	leds {
 		compatible = "gpio-leds";
 
-		work {
+		work_led: led-0 {
 			gpios = <&gpio8 RK_PA1 GPIO_ACTIVE_LOW>;
 			label = "firefly:blue:user";
 			linux,default-trigger = "rc-feedback";
 			pinctrl-names = "default";
-			pinctrl-0 = <&work_led>;
+			pinctrl-0 = <&work_led_pin>;
 		};
 
-		power {
+		power_led: led-1 {
 			gpios = <&gpio8 RK_PA2 GPIO_ACTIVE_LOW>;
 			label = "firefly:green:power";
 			linux,default-trigger = "default-on";
 			pinctrl-names = "default";
-			pinctrl-0 = <&power_led>;
+			pinctrl-0 = <&power_led_pin>;
 		};
 	};
 
@@ -429,11 +429,11 @@
 	};
 
 	leds {
-		power_led: power-led {
+		power_led_pin: power-led-pin {
 			rockchip,pins = <8 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 
-		work_led: work-led {
+		work_led_pin: work-led-pin {
 			rockchip,pins = <8 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
diff --git a/arch/arm/boot/dts/rk3288-miqi.dts b/arch/arm/boot/dts/rk3288-miqi.dts
index c41d012c8850..213c9eb84f76 100644
--- a/arch/arm/boot/dts/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rk3288-miqi.dts
@@ -30,7 +30,7 @@
 	leds {
 		compatible = "gpio-leds";
 
-		work {
+		work_led: led-0 {
 			gpios = <&gpio7 RK_PA2 GPIO_ACTIVE_HIGH>;
 			label = "miqi:green:user";
 			linux,default-trigger = "timer";
diff --git a/arch/arm/boot/dts/rk3288-phycore-som.dtsi b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
index 77a47b9b756d..e43887c9635f 100644
--- a/arch/arm/boot/dts/rk3288-phycore-som.dtsi
+++ b/arch/arm/boot/dts/rk3288-phycore-som.dtsi
@@ -36,9 +36,9 @@
 	leds: user-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&user_led>;
+		pinctrl-0 = <&user_led_pin>;
 
-		user {
+		user_led: led-0 {
 			label = "green_led";
 			gpios = <&gpio7 2 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
@@ -372,7 +372,7 @@
 	};
 
 	leds {
-		user_led: user-led {
+		user_led_pin: user-led-pin {
 			rockchip,pins = <7 RK_PA2 RK_FUNC_GPIO &pcfg_output_high>;
 		};
 	};
diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts b/arch/arm/boot/dts/rk3288-rock2-square.dts
index cdcdc921ee09..3cca4d0f9b09 100644
--- a/arch/arm/boot/dts/rk3288-rock2-square.dts
+++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
@@ -41,13 +41,13 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		heartbeat {
+		heartbeat_led: led-0 {
 			gpios = <&gpio7 RK_PB7 GPIO_ACTIVE_LOW>;
 			label = "rock2:green:state1";
 			linux,default-trigger = "heartbeat";
 		};
 
-		mmc {
+		mmc_led: led-1 {
 			gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_LOW>;
 			label = "rock2:blue:state2";
 			linux,default-trigger = "mmc0";
diff --git a/arch/arm/boot/dts/rk3288-tinker.dtsi b/arch/arm/boot/dts/rk3288-tinker.dtsi
index acfaa12ec239..90e9be443fe6 100644
--- a/arch/arm/boot/dts/rk3288-tinker.dtsi
+++ b/arch/arm/boot/dts/rk3288-tinker.dtsi
@@ -46,17 +46,17 @@
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		act-led {
+		act_led: led-0 {
 			gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "mmc0";
 		};
 
-		heartbeat-led {
+		heartbeat_led: led-1 {
 			gpios = <&gpio1 RK_PD1 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
 
-		pwr-led {
+		pwr_led: led-2 {
 			gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "default-on";
 		};
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index 0cd88774db95..2e1edd85f04a 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -7,7 +7,6 @@
 #include <dt-bindings/clock/rk3288-cru.h>
 #include <dt-bindings/power/rk3288-power.h>
 #include <dt-bindings/thermal/thermal.h>
-#include <dt-bindings/power/rk3288-power.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
 
 / {
diff --git a/arch/arm/boot/dts/rtd1195-horseradish.dts b/arch/arm/boot/dts/rtd1195-horseradish.dts
new file mode 100644
index 000000000000..9d06d3d34c74
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195-horseradish.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1195.dtsi"
+
+/ {
+	compatible = "realtek,horseradish", "realtek,rtd1195";
+	model = "Realtek Horseradish EVB";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@a800 {
+		device_type = "memory";
+		reg = <0x0000a800 0x17ff5800>, /* boot ROM to r-bus */
+		      <0x18070000 0x00090000>, /* r-bus to NOR flash */
+		      <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rtd1195-mele-x1000.dts b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
new file mode 100644
index 000000000000..c7951b9a2c97
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195-mele-x1000.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/dts-v1/;
+
+#include "rtd1195.dtsi"
+
+/ {
+	compatible = "mele,x1000", "realtek,rtd1195";
+	model = "MeLE X1000";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@a800 {
+		device_type = "memory";
+		reg = <0x0000a800 0x17ff5800>, /* boot ROM to r-bus */
+		      <0x18070000 0x00090000>, /* r-bus to NOR flash */
+		      <0x19100000 0x26f00000>; /* NOR flash to 1 GiB */
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/rtd1195.dtsi b/arch/arm/boot/dts/rtd1195.dtsi
new file mode 100644
index 000000000000..21897210d9d0
--- /dev/null
+++ b/arch/arm/boot/dts/rtd1195.dtsi
@@ -0,0 +1,217 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
+/*
+ * Copyright (c) 2017-2019 Andreas Färber
+ */
+
+/memreserve/ 0x00000000 0x0000a800; /* boot code */
+/memreserve/ 0x0000a800 0x000f5800;
+/memreserve/ 0x17fff000 0x00001000;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/realtek,rtd1195.h>
+
+/ {
+	compatible = "realtek,rtd1195";
+	interrupt-parent = <&gic>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x0>;
+			clock-frequency = <1000000000>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a7";
+			reg = <0x1>;
+			clock-frequency = <1000000000>;
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rpc_comm: rpc@b000 {
+			reg = <0x0000b000 0x1000>;
+		};
+
+		audio@1b00000 {
+			reg = <0x01b00000 0x400000>;
+		};
+
+		rpc_ringbuf: rpc@1ffe000 {
+			reg = <0x01ffe000 0x4000>;
+		};
+
+		secure@10000000 {
+			reg = <0x10000000 0x100000>;
+			no-map;
+		};
+	};
+
+	arm-pmu {
+		compatible = "arm,cortex-a7-pmu";
+		interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>;
+	};
+
+	timer {
+		compatible = "arm,armv7-timer";
+		interrupts = <GIC_PPI 13
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10
+			(GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <27000000>;
+	};
+
+	osc27M: osc {
+		compatible = "fixed-clock";
+		clock-frequency = <27000000>;
+		#clock-cells = <0>;
+		clock-output-names = "osc27M";
+	};
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x00000000 0x00000000 0x0000a800>,
+			 <0x18000000 0x18000000 0x00070000>,
+			 <0x18100000 0x18100000 0x01000000>,
+			 <0x80000000 0x80000000 0x80000000>;
+
+		rbus: bus@18000000 {
+			compatible = "simple-bus";
+			reg = <0x18000000 0x70000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0x0 0x18000000 0x70000>;
+
+			crt: syscon@0 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x0 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x0 0x1000>;
+			};
+
+			iso: syscon@7000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x7000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x7000 0x1000>;
+			};
+
+			sb2: syscon@1a000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1a000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1a000 0x1000>;
+			};
+
+			misc: syscon@1b000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1b000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1b000 0x1000>;
+			};
+
+			scpu_wrapper: syscon@1d000 {
+				compatible = "syscon", "simple-mfd";
+				reg = <0x1d000 0x1000>;
+				reg-io-width = <4>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges = <0x0 0x1d000 0x1000>;
+			};
+		};
+
+		gic: interrupt-controller@ff011000 {
+			compatible = "arm,cortex-a7-gic";
+			reg = <0xff011000 0x1000>,
+			      <0xff012000 0x2000>,
+			      <0xff014000 0x2000>,
+			      <0xff016000 0x2000>;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+			interrupt-controller;
+			#interrupt-cells = <3>;
+		};
+	};
+};
+
+&crt {
+	reset1: reset-controller@0 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x0 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset2: reset-controller@4 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x4 0x4>;
+		#reset-cells = <1>;
+	};
+
+	reset3: reset-controller@8 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x8 0x4>;
+		#reset-cells = <1>;
+	};
+};
+
+&iso {
+	iso_reset: reset-controller@88 {
+		compatible = "snps,dw-low-reset";
+		reg = <0x88 0x4>;
+		#reset-cells = <1>;
+	};
+
+	wdt: watchdog@680 {
+		compatible = "realtek,rtd1295-watchdog";
+		reg = <0x680 0x100>;
+		clocks = <&osc27M>;
+	};
+
+	uart0: serial@800 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x800 0x400>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		resets = <&iso_reset RTD1195_ISO_RSTN_UR0>;
+		clock-frequency = <27000000>;
+		status = "disabled";
+	};
+};
+
+&misc {
+	uart1: serial@200 {
+		compatible = "snps,dw-apb-uart";
+		reg = <0x200 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		resets = <&reset2 RTD1195_RSTN_UR1>;
+		clock-frequency = <27000000>;
+		status = "disabled";
+	};
+};
diff --git a/arch/arm/boot/dts/s5pv210-aries.dtsi b/arch/arm/boot/dts/s5pv210-aries.dtsi
index 8ff70b856334..cf858029292e 100644
--- a/arch/arm/boot/dts/s5pv210-aries.dtsi
+++ b/arch/arm/boot/dts/s5pv210-aries.dtsi
@@ -11,9 +11,15 @@
 / {
 	compatible = "samsung,aries", "samsung,s5pv210";
 
-	aliases {
+	aliases: aliases {
+		i2c4 = &i2c_sound;
+		i2c5 = &i2c_accel;
 		i2c6 = &i2c_pmic;
+		i2c7 = &i2c_musb;
 		i2c9 = &i2c_fuel;
+		i2c10 = &i2c_touchkey;
+		i2c11 = &i2c_prox;
+		i2c12 = &i2c_magnetometer;
 	};
 
 	memory@30000000 {
@@ -46,6 +52,21 @@
 		regulator-name = "vibrator-en";
 		enable-active-high;
 		gpio = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctr-0 = <&vibrator_ena>;
+	};
+
+	touchkey_vdd: regulator-fixed-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VTOUCH_3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		enable-active-high;
+		gpio = <&gpj3 2 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchkey_vdd_ena>;
 	};
 
 	wifi_pwrseq: wifi-pwrseq {
@@ -57,7 +78,71 @@
 		power-off-delay-us = <500>;
 	};
 
-	i2c_pmic: i2c-gpio-0 {
+	i2c_sound: i2c-gpio-0 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&mp05 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&mp05 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&sound_i2c_pins>;
+
+		wm8994: wm8994@1a {
+			compatible = "wlf,wm8994";
+			reg = <0x1a>;
+
+			#sound-dai-cells = <0>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			clocks = <&clocks MOUT_CLKOUT>;
+			clock-names = "MCLK1";
+
+			AVDD2-supply = <&buck3_reg>;
+			DBVDD-supply = <&buck3_reg>;
+			CPVDD-supply = <&buck3_reg>;
+			SPKVDD1-supply = <&buck3_reg>;
+			SPKVDD2-supply = <&buck3_reg>;
+
+			wlf,gpio-cfg = <0xa101 0x8100 0x0100 0x0100 0x8100
+					0xa101 0x0100 0x8100 0x0100 0x0100
+					0x0100>;
+
+			wlf,ldo1ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+			wlf,ldo2ena = <&gpf3 4 GPIO_ACTIVE_HIGH>;
+
+			wlf,lineout1-se;
+			wlf,lineout2-se;
+
+			assigned-clocks = <&clocks MOUT_CLKOUT>;
+			assigned-clock-rates = <0>;
+			assigned-clock-parents = <&xusbxti>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&codec_ldo>;
+		};
+	};
+
+	i2c_accel: i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj3 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj3 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&accel_i2c_pins>;
+
+		status = "disabled";
+
+		/* bma023 accelerometer, no mainline binding */
+	};
+
+	i2c_pmic: i2c-gpio-2 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&gpj4 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&gpj4 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -65,6 +150,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_i2c_pins>;
+
 		pmic@66 {
 			compatible = "maxim,max8998";
 			reg = <0x66>;
@@ -81,6 +169,9 @@
 			max8998,pmic-buck2-dvs-gpio = <&gph0 5 GPIO_ACTIVE_HIGH>;
 			max8998,pmic-buck2-dvs-voltage = <1100000>, <1000000>;
 
+			pinctrl-names = "default";
+			pinctrl-0 = <&pmic_dvs_pins &pmic_irq>;
+
 			regulators {
 				ldo2_reg: LDO2 {
 					regulator-name = "VALIVE_1.2V";
@@ -107,7 +198,6 @@
 					regulator-name = "VADC_3.3V";
 					regulator-min-microvolt = <3300000>;
 					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
 
 					regulator-state-mem {
 						regulator-off-in-suspend;
@@ -134,8 +224,6 @@
 					regulator-name = "VLCD_1.8V";
 					regulator-min-microvolt = <1800000>;
 					regulator-max-microvolt = <1800000>;
-					/* Till we get panel driver */
-					regulator-always-on;
 
 					regulator-state-mem {
 						regulator-off-in-suspend;
@@ -234,8 +322,6 @@
 					regulator-name = "VCC_3.0V_LCD";
 					regulator-min-microvolt = <3000000>;
 					regulator-max-microvolt = <3000000>;
-					/* Till we get panel driver */
-					regulator-always-on;
 
 					regulator-state-mem {
 						regulator-off-in-suspend;
@@ -306,7 +392,29 @@
 		};
 	};
 
-	i2c_fuel: i2c-gpio-1 {
+	i2c_musb: i2c-gpio-3 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj3 4 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj3 5 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&musb_i2c_pins>;
+
+		fsa9480: musb@25 {
+			compatible = "fcs,fsa9480";
+			reg = <0x25>;
+			interrupt-parent = <&gph2>;
+			interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&musb_irq>;
+		};
+	};
+
+	i2c_fuel: i2c-gpio-4 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&mp05 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&mp05 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
@@ -314,6 +422,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		pinctrl-names = "default";
+		pinctrl-0 = <&fg_i2c_pins>;
+
 		fuelgauge@36 {
 			compatible = "maxim,max17040";
 			interrupt-parent = <&vic0>;
@@ -322,6 +433,64 @@
 		};
 	};
 
+	i2c_touchkey: i2c-gpio-5 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj3 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj3 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&touchkey_i2c_pins>;
+
+		touchkey@20 {
+			compatible = "cypress,aries-touchkey";
+			reg = <0x20>;
+			vdd-supply = <&touchkey_vdd>;
+			vcc-supply = <&buck3_reg>;
+			linux,keycodes = <KEY_MENU KEY_BACK
+					  KEY_HOMEPAGE KEY_SEARCH>;
+			interrupt-parent = <&gpj4>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&touchkey_irq>;
+		};
+	};
+
+	i2c_prox: i2c-gpio-6 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpg2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpg0 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&prox_i2c_pins>;
+
+		status = "disabled";
+
+		/* Sharp gp2a prox/light sensor, incomplete mainline binding */
+	};
+
+	i2c_magnetometer: i2c-gpio-7 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpj0 1 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpj0 0 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&magnetometer_i2c_pins>;
+
+		status = "disabled";
+
+		/* Yamaha yas529 magnetometer, no mainline binding */
+	};
+
 	vibrator: pwm-vibrator {
 		compatible = "pwm-vibrator";
 		pwms = <&pwm 1 44642 0>;
@@ -337,6 +506,45 @@
 		offset = <0x681c>; /* PS_HOLD_CONTROL */
 		value = <0x5200>;
 	};
+
+	spi_lcd: spi-gpio-0 {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&mp04 1 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&mp04 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&mp01 1 GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_spi_pins>;
+
+		panel@0 {
+			compatible = "samsung,s6e63m0";
+			reg = <0>;
+			reset-gpios = <&mp05 5 GPIO_ACTIVE_LOW>;
+			vdd3-supply = <&ldo7_reg>;
+			vci-supply = <&ldo17_reg>;
+			spi-cs-high;
+			spi-max-frequency = <1200000>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&panel_rst>;
+
+			port {
+				lcd_ep: endpoint {
+					remote-endpoint = <&fimd_ep>;
+				};
+			};
+		};
+	};
+};
+
+&adc {
+	vdd-supply = <&ldo4_reg>;
+
+	status = "okay";
 };
 
 &fimd {
@@ -347,18 +555,13 @@
 	samsung,invert-vden;
 	samsung,invert-vclk;
 
-	display-timings {
-		timing-0 {
-			/* 480x800@60Hz */
-			clock-frequency = <25628040>;
-			hactive = <480>;
-			vactive = <800>;
-			hfront-porch = <16>;
-			hback-porch = <16>;
-			hsync-len = <2>;
-			vfront-porch = <28>;
-			vback-porch = <1>;
-			vsync-len = <2>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@3 {
+		reg = <3>;
+		fimd_ep: endpoint {
+			remote-endpoint = <&lcd_ep>;
 		};
 	};
 };
@@ -399,12 +602,39 @@
 		samsung,pin-val = <1>;
 	};
 
+	codec_ldo: codec-ldo {
+		samsung,pins = "gpf3-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+	};
+
+	prox_i2c_pins: gp2a-i2c-pins {
+		samsung,pins = "gpg0-2", "gpg2-2";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	wlan_gpio_rst: wlan-gpio-rst {
 		samsung,pins = "gpg1-2";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
+	pmic_dvs_pins: pmic-dvs-pins {
+		samsung,pins = "gph0-3", "gph0-4", "gph0-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+		samsung,pin-val = <0>;
+	};
+
+	pmic_irq: pmic-irq {
+		samsung,pins = "gph0-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_F>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	wifi_host_wake: wifi-host-wake {
 		samsung,pins = "gph2-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
@@ -419,6 +649,13 @@
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
 
+	musb_irq: musq-irq {
+		samsung,pins = "gph2-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	tf_detect: tf-detect {
 		samsung,pins = "gph3-4";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
@@ -432,12 +669,85 @@
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 	};
 
+	magnetometer_i2c_pins: yas529-i2c-pins {
+		samsung,pins = "gpj0-0", "gpj0-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	ts_irq: ts-irq {
 		samsung,pins = "gpj0-5";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
+
+	vibrator_ena: vibrator-ena {
+		samsung,pins = "gpj1-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	touchkey_i2c_pins: touchkey-i2c-pins {
+		samsung,pins = "gpj3-0", "gpj3-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	touchkey_vdd_ena: touchkey-vdd-ena {
+		samsung,pins = "gpj3-2";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	musb_i2c_pins: musb-i2c-pins {
+		samsung,pins = "gpj3-4", "gpj3-5";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	accel_i2c_pins: accel-i2c-pins {
+		samsung,pins = "gpj3-6", "gpj3-7";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	pmic_i2c_pins: pmic-i2c-pins {
+		samsung,pins = "gpj4-0", "gpj4-3";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	touchkey_irq: touchkey-irq {
+		samsung,pins = "gpj4-1";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	lcd_spi_pins: spi-lcd-pins {
+		samsung,pins = "mp01-1", "mp04-1", "mp04-3";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fg_i2c_pins: fg-i2c-pins {
+		samsung,pins = "mp05-0", "mp05-1";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	sound_i2c_pins: sound-i2c-pins {
+		samsung,pins = "mp05-2", "mp05-3";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	panel_rst: panel-rst {
+		samsung,pins = "mp05-5";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
 };
 
 &pwm {
@@ -454,11 +764,16 @@
 	pinctrl-names = "default";
 	cap-sd-highspeed;
 	cap-mmc-highspeed;
+	keep-power-in-suspend;
 
 	mmc-pwrseq = <&wifi_pwrseq>;
 	non-removable;
 	status = "okay";
 
+	assigned-clocks = <&clocks MOUT_MMC1>, <&clocks SCLK_MMC1>;
+	assigned-clock-rates = <0>, <50000000>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
+
 	wlan@1 {
 		reg = <1>;
 		compatible = "brcm,bcm4329-fmac";
@@ -475,6 +790,10 @@
 	pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &tf_detect>;
 	pinctrl-names = "default";
 	status = "okay";
+
+	assigned-clocks = <&clocks MOUT_MMC2>, <&clocks SCLK_MMC2>;
+	assigned-clock-rates = <0>, <50000000>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
 };
 
 &uart0 {
diff --git a/arch/arm/boot/dts/s5pv210-fascinate4g.dts b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
index 07a8d9bbe5b8..5e1b81823a8d 100644
--- a/arch/arm/boot/dts/s5pv210-fascinate4g.dts
+++ b/arch/arm/boot/dts/s5pv210-fascinate4g.dts
@@ -36,3 +36,252 @@
 		};
 	};
 };
+
+&pinctrl0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep_cfg>;
+
+	/* Based on vendor kernel v2.6.35.7 */
+	sleep_cfg: sleep-cfg {
+		PIN_SLP(gpa0-0, PREV, NONE);
+		PIN_SLP(gpa0-1, PREV, NONE);
+		PIN_SLP(gpa0-2, PREV, NONE);
+		PIN_SLP(gpa0-3, OUT1, NONE);
+		PIN_SLP(gpa0-4, PREV, NONE);
+		PIN_SLP(gpa0-5, PREV, NONE);
+		PIN_SLP(gpa0-6, PREV, NONE);
+		PIN_SLP(gpa0-7, PREV, NONE);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, OUT0, NONE);
+		PIN_SLP(gpa1-2, INPUT, DOWN);
+		PIN_SLP(gpa1-3, OUT0, NONE);
+
+		PIN_SLP(gpb-0, OUT0, NONE);
+		PIN_SLP(gpb-1, OUT1, NONE);
+		PIN_SLP(gpb-2, OUT0, NONE);
+		PIN_SLP(gpb-3, PREV, NONE);
+		PIN_SLP(gpb-4, INPUT, NONE);
+		PIN_SLP(gpb-5, PREV, NONE);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, OUT0, NONE);
+
+		PIN_SLP(gpc0-0, OUT0, NONE);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, OUT0, NONE);
+		PIN_SLP(gpc0-3, INPUT, DOWN);
+		PIN_SLP(gpc0-4, OUT0, NONE);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, OUT0, NONE);
+		PIN_SLP(gpd0-2, INPUT, DOWN);
+		PIN_SLP(gpd0-3, INPUT, DOWN);
+
+		PIN_SLP(gpd1-0, INPUT, NONE);
+		PIN_SLP(gpd1-1, INPUT, NONE);
+		PIN_SLP(gpd1-2, INPUT, DOWN);
+		PIN_SLP(gpd1-3, INPUT, DOWN);
+		PIN_SLP(gpd1-4, INPUT, DOWN);
+		PIN_SLP(gpd1-5, INPUT, DOWN);
+
+		PIN_SLP(gpe0-0, INPUT, DOWN);
+		PIN_SLP(gpe0-1, INPUT, DOWN);
+		PIN_SLP(gpe0-2, INPUT, DOWN);
+		PIN_SLP(gpe0-3, INPUT, DOWN);
+		PIN_SLP(gpe0-4, INPUT, DOWN);
+		PIN_SLP(gpe0-5, INPUT, DOWN);
+		PIN_SLP(gpe0-6, INPUT, DOWN);
+		PIN_SLP(gpe0-7, INPUT, DOWN);
+
+		PIN_SLP(gpe1-0, INPUT, DOWN);
+		PIN_SLP(gpe1-1, INPUT, DOWN);
+		PIN_SLP(gpe1-2, INPUT, DOWN);
+		PIN_SLP(gpe1-3, OUT0, NONE);
+		PIN_SLP(gpe1-4, INPUT, DOWN);
+
+		PIN_SLP(gpf0-0, OUT0, NONE);
+		PIN_SLP(gpf0-1, OUT0, NONE);
+		PIN_SLP(gpf0-2, OUT0, NONE);
+		PIN_SLP(gpf0-3, OUT0, NONE);
+		PIN_SLP(gpf0-4, OUT0, NONE);
+		PIN_SLP(gpf0-5, OUT0, NONE);
+		PIN_SLP(gpf0-6, OUT0, NONE);
+		PIN_SLP(gpf0-7, OUT0, NONE);
+
+		PIN_SLP(gpf1-0, OUT0, NONE);
+		PIN_SLP(gpf1-1, OUT0, NONE);
+		PIN_SLP(gpf1-2, OUT0, NONE);
+		PIN_SLP(gpf1-3, OUT0, NONE);
+		PIN_SLP(gpf1-4, OUT0, NONE);
+		PIN_SLP(gpf1-5, OUT0, NONE);
+		PIN_SLP(gpf1-6, OUT0, NONE);
+		PIN_SLP(gpf1-7, OUT0, NONE);
+
+		PIN_SLP(gpf2-0, OUT0, NONE);
+		PIN_SLP(gpf2-1, OUT0, NONE);
+		PIN_SLP(gpf2-2, OUT0, NONE);
+		PIN_SLP(gpf2-3, OUT0, NONE);
+		PIN_SLP(gpf2-4, OUT0, NONE);
+		PIN_SLP(gpf2-5, OUT0, NONE);
+		PIN_SLP(gpf2-6, OUT0, NONE);
+		PIN_SLP(gpf2-7, OUT0, NONE);
+
+		PIN_SLP(gpf3-0, OUT0, NONE);
+		PIN_SLP(gpf3-1, OUT0, NONE);
+		PIN_SLP(gpf3-2, OUT0, NONE);
+		PIN_SLP(gpf3-3, OUT0, NONE);
+		PIN_SLP(gpf3-4, PREV, NONE);
+		PIN_SLP(gpf3-5, INPUT, DOWN);
+
+		PIN_SLP(gpg0-0, INPUT, DOWN);
+		PIN_SLP(gpg0-1, INPUT, DOWN);
+		PIN_SLP(gpg0-2, INPUT, NONE);
+		PIN_SLP(gpg0-3, INPUT, DOWN);
+		PIN_SLP(gpg0-4, INPUT, DOWN);
+		PIN_SLP(gpg0-5, INPUT, DOWN);
+		PIN_SLP(gpg0-6, INPUT, DOWN);
+
+		PIN_SLP(gpg1-0, OUT0, NONE);
+		PIN_SLP(gpg1-1, OUT1, NONE);
+		PIN_SLP(gpg1-2, PREV, NONE);
+		PIN_SLP(gpg1-3, OUT1, NONE);
+		PIN_SLP(gpg1-4, OUT1, NONE);
+		PIN_SLP(gpg1-5, OUT1, NONE);
+		PIN_SLP(gpg1-6, OUT1, NONE);
+
+		PIN_SLP(gpg2-0, OUT0, NONE);
+		PIN_SLP(gpg2-1, OUT0, NONE);
+		PIN_SLP(gpg2-2, INPUT, NONE);
+		PIN_SLP(gpg2-3, OUT0, NONE);
+		PIN_SLP(gpg2-4, OUT0, NONE);
+		PIN_SLP(gpg2-5, OUT0, NONE);
+		PIN_SLP(gpg2-6, OUT0, NONE);
+
+		PIN_SLP(gpg3-0, PREV, UP);
+		PIN_SLP(gpg3-1, PREV, UP);
+		PIN_SLP(gpg3-2, INPUT, NONE);
+		PIN_SLP(gpg3-3, INPUT, DOWN);
+		PIN_SLP(gpg3-4, OUT0, NONE);
+		PIN_SLP(gpg3-5, OUT0, NONE);
+		PIN_SLP(gpg3-6, INPUT, DOWN);
+
+		PIN_SLP(gpi-0, PREV, NONE);
+		PIN_SLP(gpi-1, INPUT, DOWN);
+		PIN_SLP(gpi-2, PREV, NONE);
+		PIN_SLP(gpi-3, PREV, NONE);
+		PIN_SLP(gpi-4, PREV, NONE);
+		PIN_SLP(gpi-5, INPUT, DOWN);
+		PIN_SLP(gpi-6, INPUT, DOWN);
+
+		PIN_SLP(gpj0-0, INPUT, NONE);
+		PIN_SLP(gpj0-1, INPUT, NONE);
+		PIN_SLP(gpj0-2, INPUT, NONE);
+		PIN_SLP(gpj0-3, INPUT, NONE);
+		PIN_SLP(gpj0-4, INPUT, NONE);
+		PIN_SLP(gpj0-5, INPUT, DOWN);
+		PIN_SLP(gpj0-6, OUT0, NONE);
+		PIN_SLP(gpj0-7, INPUT, NONE);
+
+		PIN_SLP(gpj1-0, OUT1, NONE);
+		PIN_SLP(gpj1-1, OUT0, NONE);
+		PIN_SLP(gpj1-2, INPUT, DOWN);
+		PIN_SLP(gpj1-3, PREV, NONE);
+		PIN_SLP(gpj1-4, PREV, NONE);
+		PIN_SLP(gpj1-5, OUT0, NONE);
+
+		PIN_SLP(gpj2-0, INPUT, DOWN);
+		PIN_SLP(gpj2-1, INPUT, DOWN);
+		PIN_SLP(gpj2-2, OUT0, NONE);
+		PIN_SLP(gpj2-3, INPUT, DOWN);
+		PIN_SLP(gpj2-4, INPUT, DOWN);
+		PIN_SLP(gpj2-5, PREV, NONE);
+		PIN_SLP(gpj2-6, PREV, NONE);
+		PIN_SLP(gpj2-7, INPUT, DOWN);
+
+		PIN_SLP(gpj3-0, INPUT, NONE);
+		PIN_SLP(gpj3-1, INPUT, NONE);
+		PIN_SLP(gpj3-2, OUT0, NONE);
+		PIN_SLP(gpj3-3, INPUT, DOWN);
+		PIN_SLP(gpj3-4, INPUT, NONE);
+		PIN_SLP(gpj3-5, INPUT, NONE);
+		PIN_SLP(gpj3-6, INPUT, NONE);
+		PIN_SLP(gpj3-7, INPUT, NONE);
+
+		PIN_SLP(gpj4-0, INPUT, NONE);
+		PIN_SLP(gpj4-1, INPUT, DOWN);
+		PIN_SLP(gpj4-2, PREV, NONE);
+		PIN_SLP(gpj4-3, INPUT, NONE);
+		PIN_SLP(gpj4-4, INPUT, DOWN);
+
+		PIN_SLP(mp01-0, OUT1, NONE);
+		PIN_SLP(mp01-1, OUT0, NONE);
+		PIN_SLP(mp01-2, INPUT, DOWN);
+		PIN_SLP(mp01-3, INPUT, DOWN);
+		PIN_SLP(mp01-4, OUT1, NONE);
+		PIN_SLP(mp01-5, INPUT, DOWN);
+		PIN_SLP(mp01-6, INPUT, DOWN);
+		PIN_SLP(mp01-7, INPUT, DOWN);
+
+		PIN_SLP(mp02-0, INPUT, DOWN);
+		PIN_SLP(mp02-1, INPUT, DOWN);
+		PIN_SLP(mp02-2, INPUT, NONE);
+		PIN_SLP(mp02-3, INPUT, DOWN);
+
+		PIN_SLP(mp03-0, INPUT, DOWN);
+		PIN_SLP(mp03-1, INPUT, DOWN);
+		PIN_SLP(mp03-2, OUT1, NONE);
+		PIN_SLP(mp03-3, OUT0, NONE);
+		PIN_SLP(mp03-4, INPUT, NONE);
+		PIN_SLP(mp03-5, OUT0, NONE);
+		PIN_SLP(mp03-6, INPUT, DOWN);
+		PIN_SLP(mp03-7, INPUT, DOWN);
+
+		PIN_SLP(mp04-0, INPUT, DOWN);
+		PIN_SLP(mp04-1, OUT0, NONE);
+		PIN_SLP(mp04-2, INPUT, DOWN);
+		PIN_SLP(mp04-3, OUT0, NONE);
+		PIN_SLP(mp04-4, INPUT, DOWN);
+		PIN_SLP(mp04-5, INPUT, DOWN);
+		PIN_SLP(mp04-6, OUT0, NONE);
+		PIN_SLP(mp04-7, INPUT, DOWN);
+
+		PIN_SLP(mp05-0, INPUT, NONE);
+		PIN_SLP(mp05-1, INPUT, NONE);
+		PIN_SLP(mp05-2, INPUT, NONE);
+		PIN_SLP(mp05-3, INPUT, NONE);
+		PIN_SLP(mp05-4, INPUT, DOWN);
+		PIN_SLP(mp05-5, OUT0, NONE);
+		PIN_SLP(mp05-6, INPUT, DOWN);
+		PIN_SLP(mp05-7, PREV, NONE);
+
+		PIN_SLP(mp06-0, INPUT, DOWN);
+		PIN_SLP(mp06-1, INPUT, DOWN);
+		PIN_SLP(mp06-2, INPUT, DOWN);
+		PIN_SLP(mp06-3, INPUT, DOWN);
+		PIN_SLP(mp06-4, INPUT, DOWN);
+		PIN_SLP(mp06-5, INPUT, DOWN);
+		PIN_SLP(mp06-6, INPUT, DOWN);
+		PIN_SLP(mp06-7, INPUT, DOWN);
+
+		PIN_SLP(mp07-0, INPUT, DOWN);
+		PIN_SLP(mp07-1, INPUT, DOWN);
+		PIN_SLP(mp07-2, INPUT, DOWN);
+		PIN_SLP(mp07-3, INPUT, DOWN);
+		PIN_SLP(mp07-4, INPUT, DOWN);
+		PIN_SLP(mp07-5, INPUT, DOWN);
+		PIN_SLP(mp07-6, INPUT, DOWN);
+		PIN_SLP(mp07-7, INPUT, DOWN);
+	};
+};
+
+&wm8994 {
+	/* GPIO3 (BCLK2) and GPIO4 (LRCLK2) as outputs */
+	wlf,gpio-cfg = <0xa101 0x8100 0x8100 0x8100 0x8100 0xa101
+			0x0100 0x8100 0x0100 0x0100 0x0100>;
+};
diff --git a/arch/arm/boot/dts/s5pv210-galaxys.dts b/arch/arm/boot/dts/s5pv210-galaxys.dts
index cf161bbfbacf..5d10dd67eacc 100644
--- a/arch/arm/boot/dts/s5pv210-galaxys.dts
+++ b/arch/arm/boot/dts/s5pv210-galaxys.dts
@@ -49,15 +49,303 @@
 			wakeup-source;
 		};
 	};
+
+	i2c_fmradio: i2c-gpio-8 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpd1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpd1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		i2c-gpio,delay-us = <2>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&fm_i2c_pins>;
+
+		fmradio@10 {
+			compatible = "silabs,si470x";
+			reg = <0x10>;
+			interrupt-parent = <&gpj2>;
+			interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpj2 5 GPIO_ACTIVE_HIGH>;
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&fm_irq &fm_rst>;
+		};
+	};
+};
+
+&aliases {
+	i2c8 = &i2c_fmradio;
 };
 
 &pinctrl0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sleep_cfg>;
+
+	fm_i2c_pins: fm-i2c-pins {
+		samsung,pins = "gpd1-2", "gpd1-3";
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fm_irq: fm-irq {
+		samsung,pins = "gpj2-4";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_INPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	fm_rst: fm-rst {
+		samsung,pins = "gpj2-5";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
+		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
 	massmemory_en: massmemory-en {
 		samsung,pins = "gpj2-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <S3C64XX_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
+
+	/* Based on CyanogenMod 3.0.101 kernel */
+	sleep_cfg: sleep-cfg {
+		PIN_SLP(gpa0-0, PREV, NONE);
+		PIN_SLP(gpa0-1, PREV, NONE);
+		PIN_SLP(gpa0-2, PREV, NONE);
+		PIN_SLP(gpa0-3, OUT1, NONE);
+		PIN_SLP(gpa0-4, INPUT, DOWN);
+		PIN_SLP(gpa0-5, OUT0, NONE);
+		PIN_SLP(gpa0-6, INPUT, DOWN);
+		PIN_SLP(gpa0-7, OUT1, NONE);
+
+		PIN_SLP(gpa1-0, INPUT, DOWN);
+		PIN_SLP(gpa1-1, OUT0, NONE);
+		PIN_SLP(gpa1-2, INPUT, NONE);
+		PIN_SLP(gpa1-3, OUT0, NONE);
+
+		PIN_SLP(gpb-0, OUT0, NONE);
+		PIN_SLP(gpb-1, OUT1, NONE);
+		PIN_SLP(gpb-2, OUT0, NONE);
+		PIN_SLP(gpb-3, PREV, NONE);
+		PIN_SLP(gpb-4, INPUT, NONE);
+		PIN_SLP(gpb-5, PREV, NONE);
+		PIN_SLP(gpb-6, INPUT, DOWN);
+		PIN_SLP(gpb-7, OUT0, NONE);
+
+		PIN_SLP(gpc0-0, OUT0, NONE);
+		PIN_SLP(gpc0-1, INPUT, DOWN);
+		PIN_SLP(gpc0-2, OUT0, NONE);
+		PIN_SLP(gpc0-3, INPUT, NONE);
+		PIN_SLP(gpc0-4, OUT0, NONE);
+
+		PIN_SLP(gpc1-0, INPUT, DOWN);
+		PIN_SLP(gpc1-1, INPUT, DOWN);
+		PIN_SLP(gpc1-2, INPUT, DOWN);
+		PIN_SLP(gpc1-3, INPUT, DOWN);
+		PIN_SLP(gpc1-4, INPUT, DOWN);
+
+		PIN_SLP(gpd0-0, INPUT, DOWN);
+		PIN_SLP(gpd0-1, OUT0, NONE);
+		PIN_SLP(gpd0-2, INPUT, DOWN);
+		PIN_SLP(gpd0-3, INPUT, DOWN);
+
+		PIN_SLP(gpd1-0, INPUT, NONE);
+		PIN_SLP(gpd1-1, INPUT, NONE);
+		PIN_SLP(gpd1-2, INPUT, NONE);
+		PIN_SLP(gpd1-3, INPUT, NONE);
+		PIN_SLP(gpd1-4, INPUT, DOWN);
+		PIN_SLP(gpd1-5, INPUT, DOWN);
+
+		PIN_SLP(gpe0-0, INPUT, DOWN);
+		PIN_SLP(gpe0-1, INPUT, DOWN);
+		PIN_SLP(gpe0-2, INPUT, DOWN);
+		PIN_SLP(gpe0-3, INPUT, DOWN);
+		PIN_SLP(gpe0-4, INPUT, DOWN);
+		PIN_SLP(gpe0-5, INPUT, DOWN);
+		PIN_SLP(gpe0-6, INPUT, DOWN);
+		PIN_SLP(gpe0-7, INPUT, DOWN);
+
+		PIN_SLP(gpe1-0, INPUT, DOWN);
+		PIN_SLP(gpe1-1, INPUT, DOWN);
+		PIN_SLP(gpe1-2, INPUT, DOWN);
+		PIN_SLP(gpe1-3, OUT0, NONE);
+		PIN_SLP(gpe1-4, INPUT, DOWN);
+
+		PIN_SLP(gpf0-0, OUT0, NONE);
+		PIN_SLP(gpf0-1, OUT0, NONE);
+		PIN_SLP(gpf0-2, OUT0, NONE);
+		PIN_SLP(gpf0-3, OUT0, NONE);
+		PIN_SLP(gpf0-4, OUT0, NONE);
+		PIN_SLP(gpf0-5, OUT0, NONE);
+		PIN_SLP(gpf0-6, OUT0, NONE);
+		PIN_SLP(gpf0-7, OUT0, NONE);
+
+		PIN_SLP(gpf1-0, OUT0, NONE);
+		PIN_SLP(gpf1-1, OUT0, NONE);
+		PIN_SLP(gpf1-2, OUT0, NONE);
+		PIN_SLP(gpf1-3, OUT0, NONE);
+		PIN_SLP(gpf1-4, OUT0, NONE);
+		PIN_SLP(gpf1-5, OUT0, NONE);
+		PIN_SLP(gpf1-6, OUT0, NONE);
+		PIN_SLP(gpf1-7, OUT0, NONE);
+
+		PIN_SLP(gpf2-0, OUT0, NONE);
+		PIN_SLP(gpf2-1, OUT0, NONE);
+		PIN_SLP(gpf2-2, OUT0, NONE);
+		PIN_SLP(gpf2-3, OUT0, NONE);
+		PIN_SLP(gpf2-4, OUT0, NONE);
+		PIN_SLP(gpf2-5, OUT0, NONE);
+		PIN_SLP(gpf2-6, OUT0, NONE);
+		PIN_SLP(gpf2-7, OUT0, NONE);
+
+		PIN_SLP(gpf3-0, OUT0, NONE);
+		PIN_SLP(gpf3-1, OUT0, NONE);
+		PIN_SLP(gpf3-2, OUT0, NONE);
+		PIN_SLP(gpf3-3, OUT0, NONE);
+		PIN_SLP(gpf3-4, PREV, NONE);
+		PIN_SLP(gpf3-5, INPUT, DOWN);
+
+		PIN_SLP(gpg0-0, OUT0, NONE);
+		PIN_SLP(gpg0-1, INPUT, NONE);
+		PIN_SLP(gpg0-2, INPUT, NONE);
+		PIN_SLP(gpg0-3, INPUT, NONE);
+		PIN_SLP(gpg0-4, INPUT, NONE);
+		PIN_SLP(gpg0-5, INPUT, NONE);
+		PIN_SLP(gpg0-6, INPUT, NONE);
+
+		PIN_SLP(gpg1-0, OUT0, NONE);
+		PIN_SLP(gpg1-1, OUT1, NONE);
+		PIN_SLP(gpg1-2, PREV, NONE);
+		PIN_SLP(gpg1-3, OUT1, NONE);
+		PIN_SLP(gpg1-4, OUT1, NONE);
+		PIN_SLP(gpg1-5, OUT1, NONE);
+		PIN_SLP(gpg1-6, OUT1, NONE);
+
+		PIN_SLP(gpg2-0, OUT0, NONE);
+		PIN_SLP(gpg2-1, OUT0, NONE);
+		PIN_SLP(gpg2-2, INPUT, NONE);
+		PIN_SLP(gpg2-3, OUT0, NONE);
+		PIN_SLP(gpg2-4, OUT0, NONE);
+		PIN_SLP(gpg2-5, OUT0, NONE);
+		PIN_SLP(gpg2-6, OUT0, NONE);
+
+		PIN_SLP(gpg3-0, OUT1, NONE);
+		PIN_SLP(gpg3-1, OUT0, NONE);
+		PIN_SLP(gpg3-2, INPUT, NONE);
+		PIN_SLP(gpg3-3, INPUT, DOWN);
+		PIN_SLP(gpg3-4, OUT0, NONE);
+		PIN_SLP(gpg3-5, OUT0, NONE);
+		PIN_SLP(gpg3-6, INPUT, DOWN);
+
+		PIN_SLP(gpi-0, PREV, NONE);
+		PIN_SLP(gpi-1, INPUT, DOWN);
+		PIN_SLP(gpi-2, PREV, NONE);
+		PIN_SLP(gpi-3, PREV, NONE);
+		PIN_SLP(gpi-4, PREV, NONE);
+		PIN_SLP(gpi-5, INPUT, DOWN);
+		PIN_SLP(gpi-6, INPUT, DOWN);
+
+		PIN_SLP(gpj0-0, INPUT, NONE);
+		PIN_SLP(gpj0-1, INPUT, NONE);
+		PIN_SLP(gpj0-2, INPUT, NONE);
+		PIN_SLP(gpj0-3, INPUT, NONE);
+		PIN_SLP(gpj0-4, INPUT, NONE);
+		PIN_SLP(gpj0-5, INPUT, DOWN);
+		PIN_SLP(gpj0-6, OUT0, NONE);
+		PIN_SLP(gpj0-7, INPUT, NONE);
+
+		PIN_SLP(gpj1-0, INPUT, DOWN);
+		PIN_SLP(gpj1-1, OUT0, NONE);
+		PIN_SLP(gpj1-2, INPUT, DOWN);
+		PIN_SLP(gpj1-3, PREV, NONE);
+		PIN_SLP(gpj1-4, PREV, NONE);
+		PIN_SLP(gpj1-5, OUT0, NONE);
+
+		PIN_SLP(gpj2-0, INPUT, DOWN);
+		PIN_SLP(gpj2-1, INPUT, DOWN);
+		PIN_SLP(gpj2-2, OUT0, NONE);
+		PIN_SLP(gpj2-3, INPUT, DOWN);
+		PIN_SLP(gpj2-4, INPUT, UP);
+		PIN_SLP(gpj2-5, PREV, NONE);
+		PIN_SLP(gpj2-6, PREV, NONE);
+		PIN_SLP(gpj2-7, OUT1, NONE);
+
+		PIN_SLP(gpj3-0, INPUT, NONE);
+		PIN_SLP(gpj3-1, INPUT, NONE);
+		PIN_SLP(gpj3-2, OUT0, NONE);
+		PIN_SLP(gpj3-3, INPUT, DOWN);
+		PIN_SLP(gpj3-4, INPUT, NONE);
+		PIN_SLP(gpj3-5, INPUT, NONE);
+		PIN_SLP(gpj3-6, INPUT, NONE);
+		PIN_SLP(gpj3-7, INPUT, NONE);
+
+		PIN_SLP(gpj4-0, INPUT, NONE);
+		PIN_SLP(gpj4-1, INPUT, DOWN);
+		PIN_SLP(gpj4-2, PREV, NONE);
+		PIN_SLP(gpj4-3, INPUT, NONE);
+		PIN_SLP(gpj4-4, INPUT, DOWN);
+
+		PIN_SLP(mp01-0, INPUT, DOWN);
+		PIN_SLP(mp01-1, OUT0, NONE);
+		PIN_SLP(mp01-2, INPUT, DOWN);
+		PIN_SLP(mp01-3, INPUT, DOWN);
+		PIN_SLP(mp01-4, OUT1, NONE);
+		PIN_SLP(mp01-5, INPUT, DOWN);
+		PIN_SLP(mp01-6, INPUT, DOWN);
+		PIN_SLP(mp01-7, INPUT, DOWN);
+
+		PIN_SLP(mp02-0, INPUT, DOWN);
+		PIN_SLP(mp02-1, INPUT, DOWN);
+		PIN_SLP(mp02-2, INPUT, NONE);
+		PIN_SLP(mp02-3, INPUT, DOWN);
+
+		PIN_SLP(mp03-0, INPUT, DOWN);
+		PIN_SLP(mp03-1, INPUT, DOWN);
+		PIN_SLP(mp03-2, OUT1, NONE);
+		PIN_SLP(mp03-3, OUT0, NONE);
+		PIN_SLP(mp03-4, INPUT, NONE);
+		PIN_SLP(mp03-5, OUT1, NONE);
+		PIN_SLP(mp03-6, INPUT, DOWN);
+		PIN_SLP(mp03-7, INPUT, DOWN);
+
+		PIN_SLP(mp04-0, INPUT, DOWN);
+		PIN_SLP(mp04-1, OUT0, NONE);
+		PIN_SLP(mp04-2, INPUT, DOWN);
+		PIN_SLP(mp04-3, OUT0, NONE);
+		PIN_SLP(mp04-4, INPUT, DOWN);
+		PIN_SLP(mp04-5, INPUT, DOWN);
+		PIN_SLP(mp04-6, OUT0, NONE);
+		PIN_SLP(mp04-7, INPUT, DOWN);
+
+		PIN_SLP(mp05-0, INPUT, NONE);
+		PIN_SLP(mp05-1, INPUT, NONE);
+		PIN_SLP(mp05-2, INPUT, NONE);
+		PIN_SLP(mp05-3, INPUT, NONE);
+		PIN_SLP(mp05-4, INPUT, DOWN);
+		PIN_SLP(mp05-5, OUT0, NONE);
+		PIN_SLP(mp05-6, INPUT, DOWN);
+		PIN_SLP(mp05-7, PREV, NONE);
+
+		PIN_SLP(mp06-0, INPUT, DOWN);
+		PIN_SLP(mp06-1, INPUT, DOWN);
+		PIN_SLP(mp06-2, INPUT, DOWN);
+		PIN_SLP(mp06-3, INPUT, DOWN);
+		PIN_SLP(mp06-4, INPUT, DOWN);
+		PIN_SLP(mp06-5, INPUT, DOWN);
+		PIN_SLP(mp06-6, INPUT, DOWN);
+		PIN_SLP(mp06-7, INPUT, DOWN);
+
+		PIN_SLP(mp07-0, INPUT, DOWN);
+		PIN_SLP(mp07-1, INPUT, DOWN);
+		PIN_SLP(mp07-2, INPUT, DOWN);
+		PIN_SLP(mp07-3, INPUT, DOWN);
+		PIN_SLP(mp07-4, INPUT, DOWN);
+		PIN_SLP(mp07-5, INPUT, DOWN);
+		PIN_SLP(mp07-6, INPUT, DOWN);
+		PIN_SLP(mp07-7, INPUT, DOWN);
+	};
 };
 
 &sdhci0 {
@@ -67,4 +355,8 @@
 	pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>;
 	pinctrl-names = "default";
 	status = "okay";
+
+	assigned-clocks = <&clocks MOUT_MMC0>, <&clocks SCLK_MMC0>;
+	assigned-clock-rates = <0>, <52000000>;
+	assigned-clock-parents = <&clocks MOUT_MPLL>;
 };
diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
index 7f0c9d447871..5e8b66281f01 100644
--- a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi
@@ -18,6 +18,13 @@
 
 #include <dt-bindings/pinctrl/samsung.h>
 
+#define PIN_SLP(_pin, _mode, _pull)					\
+	_pin {								\
+		samsung,pins = #_pin;					\
+		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_ ##_mode>;	\
+		samsung,pin-pud-pdn = <S3C64XX_PIN_PULL_ ##_pull>;	\
+	}
+
 &pinctrl0 {
 	gpa0: gpa0 {
 		gpio-controller;
@@ -195,7 +202,7 @@
 		#interrupt-cells = <2>;
 	};
 
-	gpgi: gpgi {
+	gpi: gpi {
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi
index 2ad642f51fd9..1b0ee884e91d 100644
--- a/arch/arm/boot/dts/s5pv210.dtsi
+++ b/arch/arm/boot/dts/s5pv210.dtsi
@@ -159,6 +159,18 @@
 			};
 		};
 
+		adc: adc@e1700000 {
+			compatible = "samsung,s5pv210-adc";
+			reg = <0xe1700000 0x1000>;
+			interrupt-parent = <&vic2>;
+			interrupts = <23>, <24>;
+			clocks = <&clocks CLK_TSADC>;
+			clock-names = "adc";
+			#io-channel-cells = <1>;
+			io-channel-ranges;
+			status = "disabled";
+		};
+
 		spi0: spi@e1300000 {
 			compatible = "samsung,s5pv210-spi";
 			reg = <0xe1300000 0x1000>;
@@ -614,7 +626,7 @@
 				clock-names = "fimc",
 						"sclk_fimc";
 				samsung,pix-limits = <4224 8192 1920 4224>;
-				samsung,mainscaler-ext;
+				samsung,min-pix-alignment = <16 8>;
 				samsung,cam-if;
 			};
 
@@ -628,8 +640,10 @@
 				clock-names = "fimc",
 						"sclk_fimc";
 				samsung,pix-limits = <4224 8192 1920 4224>;
+				samsung,min-pix-alignment = <1 1>;
 				samsung,mainscaler-ext;
 				samsung,cam-if;
+				samsung,lcd-wb;
 			};
 
 			fimc2: fimc@fb400000 {
@@ -641,9 +655,10 @@
 						<&clocks SCLK_FIMC2>;
 				clock-names = "fimc",
 						"sclk_fimc";
-				samsung,pix-limits = <4224 8192 1920 4224>;
-				samsung,mainscaler-ext;
-				samsung,lcd-wb;
+				samsung,pix-limits = <1920 8192 1280 1920>;
+				samsung,min-pix-alignment = <16 8>;
+				samsung,rotators = <0>;
+				samsung,cam-if;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index ab550d69db91..c0a3ca8f9bf7 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -21,10 +21,6 @@
 	aliases {
 		serial0 = &uart1;
 		serial1 = &uart3;
-		tcb0 = &tcb0;
-		tcb1 = &tcb1;
-		i2s0 = &i2s0;
-		i2s1 = &i2s1;
 	};
 
 	cpus {
@@ -635,6 +631,64 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf8034000 0x800>;
 				status = "disabled";
+
+				uart5: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi2: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c2: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(11))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(12))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx1: flexcom@f8038000 {
@@ -645,6 +699,64 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xf8038000 0x800>;
 				status = "disabled";
+
+				uart6: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi3: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c3: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <20 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(13))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(14))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			securam: sram@f8044000 {
@@ -794,6 +906,64 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xfc010000 0x800>;
 				status = "disabled";
+
+				uart7: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi4: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c4: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <21 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(15))>,
+						<&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(16))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			flx3: flexcom@fc014000 {
@@ -804,6 +974,65 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xfc014000 0x800>;
 				status = "disabled";
+
+				uart8: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi5: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c5: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(17))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(18))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
 			};
 
 			flx4: flexcom@fc018000 {
@@ -814,6 +1043,64 @@
 				#size-cells = <1>;
 				ranges = <0x0 0xfc018000 0x800>;
 				status = "disabled";
+
+				uart9: serial@200 {
+					compatible = "atmel,at91sam9260-usart";
+					reg = <0x200 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					clock-names = "usart";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <32>;
+					status = "disabled";
+				};
+
+				spi6: spi@400 {
+					compatible = "atmel,at91rm9200-spi";
+					reg = <0x400 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					clock-names = "spi_clk";
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
+
+				i2c6: i2c@600 {
+					compatible = "atmel,sama5d2-i2c";
+					reg = <0x600 0x200>;
+					interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
+					dmas = <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(19))>,
+					       <&dma0
+						(AT91_XDMAC_DT_MEM_IF(0) |
+						 AT91_XDMAC_DT_PER_IF(1) |
+						 AT91_XDMAC_DT_PERID(20))>;
+					dma-names = "tx", "rx";
+					atmel,fifo-size = <16>;
+					status = "disabled";
+				};
 			};
 
 			trng@fc01c000 {
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index f11b018e9173..c53e48445e4d 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -108,7 +108,7 @@
 				status = "disabled";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
 				clock-names = "mci_clk";
 			};
 
@@ -123,7 +123,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi0>;
-				clocks = <&spi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -137,7 +137,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
-				clocks = <&ssc0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -148,7 +148,7 @@
 				#size-cells = <0>;
 				reg = <0xf0010000 0x100>;
 				interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb0_clk>, <&clk32k>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 26>, <&clk32k>;
 				clock-names = "t0_clk", "slow_clk";
 			};
 
@@ -163,10 +163,10 @@
 				pinctrl-0 = <&pinctrl_i2c0>;
 				pinctrl-1 = <&pinctrl_i2c0_gpio>;
 				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
 				status = "disabled";
 			};
 
@@ -181,10 +181,10 @@
 				pinctrl-0 = <&pinctrl_i2c1>;
 				pinctrl-1 = <&pinctrl_i2c1_gpio>;
 				sda-gpios = <&pioC 26 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioC 27 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioC 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
 				status = "disabled";
 			};
 
@@ -197,7 +197,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart0>;
-				clocks = <&usart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -211,7 +211,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart1>;
-				clocks = <&usart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -222,7 +222,7 @@
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&uart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -232,7 +232,7 @@
 				reg = <0xf002c000 0x300>;
 				interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>;
 				#pwm-cells = <3>;
-				clocks = <&pwm_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
 				status = "disabled";
 			};
 
@@ -242,7 +242,7 @@
 				interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_isi_data_0_7>;
-				clocks = <&isi_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
 				clock-names = "isi_clk";
 				status = "disabled";
 				port {
@@ -267,7 +267,7 @@
 				status = "disabled";
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&mci1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
 				clock-names = "mci_clk";
 			};
 
@@ -282,7 +282,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_spi1>;
-				clocks = <&spi1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
 				clock-names = "spi_clk";
 				status = "disabled";
 			};
@@ -296,7 +296,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
-				clocks = <&ssc1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 39>;
 				clock-names = "pclk";
 				status = "disabled";
 			};
@@ -323,7 +323,7 @@
 					&pinctrl_adc0_ad10
 					&pinctrl_adc0_ad11
 					>;
-				clocks = <&adc_clk>,
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 29>,
 					 <&adc_op_clk>;
 				clock-names = "adc_clk", "adc_op_clk";
 				atmel,adc-channels-used = <0xfff>;
@@ -367,10 +367,10 @@
 				pinctrl-0 = <&pinctrl_i2c2>;
 				pinctrl-1 = <&pinctrl_i2c2_gpio>;
 				sda-gpios = <&pioA 18 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA 19 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&twi2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
 				status = "disabled";
 			};
 
@@ -383,7 +383,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart2>;
-				clocks = <&usart2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -397,7 +397,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_usart3>;
-				clocks = <&usart3_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -408,7 +408,7 @@
 				interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>;
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>;
 				dma-names = "tx";
-				clocks = <&sha_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 42>;
 				clock-names = "sha_clk";
 			};
 
@@ -419,7 +419,7 @@
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>,
 				       <&dma1 2 AT91_DMA_CFG_PER_ID(19)>;
 				dma-names = "tx", "rx";
-				clocks = <&aes_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
 				clock-names = "aes_clk";
 			};
 
@@ -430,7 +430,7 @@
 				dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>,
 				       <&dma1 2 AT91_DMA_CFG_PER_ID(21)>;
 				dma-names = "tx", "rx";
-				clocks = <&tdes_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 44>;
 				clock-names = "tdes_clk";
 			};
 
@@ -438,14 +438,14 @@
 				compatible = "atmel,at91sam9g45-trng";
 				reg = <0xf8040000 0x100>;
 				interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&trng_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 45>;
 			};
 
 			hsmc: hsmc@ffffc000 {
 				compatible = "atmel,sama5d3-smc", "syscon", "simple-mfd";
 				reg = <0xffffc000 0x1000>;
 				interrupts = <5 IRQ_TYPE_LEVEL_HIGH 6>;
-				clocks = <&hsmc_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
 				#address-cells = <1>;
 				#size-cells = <1>;
 				ranges;
@@ -462,7 +462,7 @@
 				reg = <0xffffe600 0x200>;
 				interrupts = <30 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
-				clocks = <&dma0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
 				clock-names = "dma_clk";
 			};
 
@@ -471,14 +471,14 @@
 				reg = <0xffffe800 0x200>;
 				interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
 				#dma-cells = <2>;
-				clocks = <&dma1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 31>;
 				clock-names = "dma_clk";
 			};
 
 			ramc0: ramc@ffffea00 {
 				compatible = "atmel,sama5d3-ddramc";
 				reg = <0xffffea00 0x200>;
-				clocks = <&ddrck>, <&mpddr_clk>;
+				clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 49>;
 				clock-names = "ddrck", "mpddr";
 			};
 
@@ -491,7 +491,7 @@
 				dma-names = "tx", "rx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_dbgu>;
-				clocks = <&dbgu_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -967,7 +967,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioA_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
 				};
 
 				pioB: gpio@fffff400 {
@@ -978,7 +978,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioB_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
 				};
 
 				pioC: gpio@fffff600 {
@@ -989,7 +989,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioC_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
 				};
 
 				pioD: gpio@fffff800 {
@@ -1000,7 +1000,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioD_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
 				};
 
 				pioE: gpio@fffffa00 {
@@ -1011,7 +1011,7 @@
 					gpio-controller;
 					interrupt-controller;
 					#interrupt-cells = <2>;
-					clocks = <&pioE_clk>;
+					clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
 				};
 			};
 
@@ -1019,353 +1019,9 @@
 				compatible = "atmel,sama5d3-pmc", "syscon";
 				reg = <0xfffffc00 0x120>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				interrupt-controller;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				#interrupt-cells = <1>;
-
-				main_rc_osc: main_rc_osc {
-					compatible = "atmel,at91sam9x5-clk-main-rc-osc";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_MOSCRCS>;
-					clock-frequency = <12000000>;
-					clock-accuracy = <50000000>;
-				};
-
-				main_osc: main_osc {
-					compatible = "atmel,at91rm9200-clk-main-osc";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_MOSCS>;
-					clocks = <&main_xtal>;
-				};
-
-				main: mainck {
-					compatible = "atmel,at91sam9x5-clk-main";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_MOSCSELS>;
-					clocks = <&main_rc_osc &main_osc>;
-				};
-
-				plla: pllack {
-					compatible = "atmel,sama5d3-clk-pll";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_LOCKA>;
-					clocks = <&main>;
-					reg = <0>;
-					atmel,clk-input-range = <8000000 50000000>;
-					#atmel,pll-clk-output-range-cells = <4>;
-					atmel,pll-clk-output-ranges = <400000000 1000000000 0 0>;
-				};
-
-				plladiv: plladivck {
-					compatible = "atmel,at91sam9x5-clk-plldiv";
-					#clock-cells = <0>;
-					clocks = <&plla>;
-				};
-
-				utmi: utmick {
-					compatible = "atmel,at91sam9x5-clk-utmi";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_LOCKU>;
-					clocks = <&main>;
-				};
-
-				mck: masterck {
-					compatible = "atmel,at91sam9x5-clk-master";
-					#clock-cells = <0>;
-					interrupt-parent = <&pmc>;
-					interrupts = <AT91_PMC_MCKRDY>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
-					atmel,clk-output-range = <0 166000000>;
-					atmel,clk-divisors = <1 2 4 3>;
-				};
-
-				usb: usbck {
-					compatible = "atmel,at91sam9x5-clk-usb";
-					#clock-cells = <0>;
-					clocks = <&plladiv>, <&utmi>;
-				};
-
-				prog: progck {
-					compatible = "atmel,at91sam9x5-clk-programmable";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					interrupt-parent = <&pmc>;
-					clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
-					prog0: prog0 {
-						#clock-cells = <0>;
-						reg = <0>;
-						interrupts = <AT91_PMC_PCKRDY(0)>;
-					};
-
-					prog1: prog1 {
-						#clock-cells = <0>;
-						reg = <1>;
-						interrupts = <AT91_PMC_PCKRDY(1)>;
-					};
-
-					prog2: prog2 {
-						#clock-cells = <0>;
-						reg = <2>;
-						interrupts = <AT91_PMC_PCKRDY(2)>;
-					};
-				};
-
-				smd: smdclk {
-					compatible = "atmel,at91sam9x5-clk-smd";
-					#clock-cells = <0>;
-					clocks = <&plladiv>, <&utmi>;
-				};
-
-				systemck {
-					compatible = "atmel,at91rm9200-clk-system";
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					ddrck: ddrck {
-						#clock-cells = <0>;
-						reg = <2>;
-						clocks = <&mck>;
-					};
-
-					smdck: smdck {
-						#clock-cells = <0>;
-						reg = <4>;
-						clocks = <&smd>;
-					};
-
-					uhpck: uhpck {
-						#clock-cells = <0>;
-						reg = <6>;
-						clocks = <&usb>;
-					};
-
-					udpck: udpck {
-						#clock-cells = <0>;
-						reg = <7>;
-						clocks = <&usb>;
-					};
-
-					pck0: pck0 {
-						#clock-cells = <0>;
-						reg = <8>;
-						clocks = <&prog0>;
-					};
-
-					pck1: pck1 {
-						#clock-cells = <0>;
-						reg = <9>;
-						clocks = <&prog1>;
-					};
-
-					pck2: pck2 {
-						#clock-cells = <0>;
-						reg = <10>;
-						clocks = <&prog2>;
-					};
-				};
-
-				periphck {
-					compatible = "atmel,at91sam9x5-clk-peripheral";
-					#address-cells = <1>;
-					#size-cells = <0>;
-					clocks = <&mck>;
-
-					dbgu_clk: dbgu_clk {
-						#clock-cells = <0>;
-						reg = <2>;
-					};
-
-					hsmc_clk: hsmc_clk {
-						#clock-cells = <0>;
-						reg = <5>;
-					};
-
-					pioA_clk: pioA_clk {
-						#clock-cells = <0>;
-						reg = <6>;
-					};
-
-					pioB_clk: pioB_clk {
-						#clock-cells = <0>;
-						reg = <7>;
-					};
-
-					pioC_clk: pioC_clk {
-						#clock-cells = <0>;
-						reg = <8>;
-					};
-
-					pioD_clk: pioD_clk {
-						#clock-cells = <0>;
-						reg = <9>;
-					};
-
-					pioE_clk: pioE_clk {
-						#clock-cells = <0>;
-						reg = <10>;
-					};
-
-					usart0_clk: usart0_clk {
-						#clock-cells = <0>;
-						reg = <12>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					usart1_clk: usart1_clk {
-						#clock-cells = <0>;
-						reg = <13>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					usart2_clk: usart2_clk {
-						#clock-cells = <0>;
-						reg = <14>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					usart3_clk: usart3_clk {
-						#clock-cells = <0>;
-						reg = <15>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					uart0_clk: uart0_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					twi0_clk: twi0_clk {
-						reg = <18>;
-						#clock-cells = <0>;
-						atmel,clk-output-range = <0 41500000>;
-					};
-
-					twi1_clk: twi1_clk {
-						#clock-cells = <0>;
-						reg = <19>;
-						atmel,clk-output-range = <0 41500000>;
-					};
-
-					twi2_clk: twi2_clk {
-						#clock-cells = <0>;
-						reg = <20>;
-						atmel,clk-output-range = <0 41500000>;
-					};
-
-					mci0_clk: mci0_clk {
-						#clock-cells = <0>;
-						reg = <21>;
-					};
-
-					mci1_clk: mci1_clk {
-						#clock-cells = <0>;
-						reg = <22>;
-					};
-
-					spi0_clk: spi0_clk {
-						#clock-cells = <0>;
-						reg = <24>;
-						atmel,clk-output-range = <0 166000000>;
-					};
-
-					spi1_clk: spi1_clk {
-						#clock-cells = <0>;
-						reg = <25>;
-						atmel,clk-output-range = <0 166000000>;
-					};
-
-					tcb0_clk: tcb0_clk {
-						#clock-cells = <0>;
-						reg = <26>;
-						atmel,clk-output-range = <0 166000000>;
-					};
-
-					pwm_clk: pwm_clk {
-						#clock-cells = <0>;
-						reg = <28>;
-					};
-
-					adc_clk: adc_clk {
-						#clock-cells = <0>;
-						reg = <29>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					dma0_clk: dma0_clk {
-						#clock-cells = <0>;
-						reg = <30>;
-					};
-
-					dma1_clk: dma1_clk {
-						#clock-cells = <0>;
-						reg = <31>;
-					};
-
-					uhphs_clk: uhphs_clk {
-						#clock-cells = <0>;
-						reg = <32>;
-					};
-
-					udphs_clk: udphs_clk {
-						#clock-cells = <0>;
-						reg = <33>;
-					};
-
-					isi_clk: isi_clk {
-						#clock-cells = <0>;
-						reg = <37>;
-					};
-
-					ssc0_clk: ssc0_clk {
-						#clock-cells = <0>;
-						reg = <38>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					ssc1_clk: ssc1_clk {
-						#clock-cells = <0>;
-						reg = <39>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					sha_clk: sha_clk {
-						#clock-cells = <0>;
-						reg = <42>;
-					};
-
-					aes_clk: aes_clk {
-						#clock-cells = <0>;
-						reg = <43>;
-					};
-
-					tdes_clk: tdes_clk {
-						#clock-cells = <0>;
-						reg = <44>;
-					};
-
-					trng_clk: trng_clk {
-						#clock-cells = <0>;
-						reg = <45>;
-					};
-
-					fuse_clk: fuse_clk {
-						#clock-cells = <0>;
-						reg = <48>;
-					};
-
-					mpddr_clk: mpddr_clk {
-						#clock-cells = <0>;
-						reg = <49>;
-					};
-				};
+				#clock-cells = <2>;
+				clocks = <&clk32k>, <&main_xtal>;
+				clock-names = "slow_clk", "main_xtal";
 			};
 
 			reset_controller: rstc@fffffe00 {
@@ -1384,7 +1040,7 @@
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffe30 0xf>;
 				interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
-				clocks = <&mck>;
+				clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			};
 
 			watchdog: watchdog@fffffe40 {
@@ -1426,7 +1082,7 @@
 			reg = <0x00500000 0x100000
 			       0xf8030000 0x4000>;
 			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&udphs_clk>, <&utmi>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 33>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
 			clock-names = "pclk", "hclk";
 			status = "disabled";
 
@@ -1540,7 +1196,7 @@
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00600000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_SYSTEM 6>;
 			clock-names = "ohci_clk", "hclk", "uhpck";
 			status = "disabled";
 		};
@@ -1549,7 +1205,7 @@
 			compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
 			reg = <0x00700000 0x100000>;
 			interrupts = <32 IRQ_TYPE_LEVEL_HIGH 2>;
-			clocks = <&utmi>, <&uhphs_clk>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 32>;
 			clock-names = "usb_clk", "ehci_clk";
 			status = "disabled";
 		};
@@ -1565,7 +1221,7 @@
 				  0x1 0x0 0x40000000 0x10000000
 				  0x2 0x0 0x50000000 0x10000000
 				  0x3 0x0 0x60000000 0x10000000>;
-			clocks = <&mck>;
+			clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
 			status = "disabled";
 
 			nand_controller: nand-controller {
diff --git a/arch/arm/boot/dts/sama5d3_can.dtsi b/arch/arm/boot/dts/sama5d3_can.dtsi
index 2470dd3fff25..9ac29bf3f933 100644
--- a/arch/arm/boot/dts/sama5d3_can.dtsi
+++ b/arch/arm/boot/dts/sama5d3_can.dtsi
@@ -31,29 +31,13 @@
 
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					can0_clk: can0_clk {
-						#clock-cells = <0>;
-						reg = <40>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					can1_clk: can1_clk {
-						#clock-cells = <0>;
-						reg = <41>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-				};
-			};
-
 			can0: can@f000c000 {
 				compatible = "atmel,at91sam9x5-can";
 				reg = <0xf000c000 0x300>;
 				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can0_rx_tx>;
-				clocks = <&can0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
 				clock-names = "can_clk";
 				status = "disabled";
 			};
@@ -64,7 +48,7 @@
 				interrupts = <41 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_can1_rx_tx>;
-				clocks = <&can1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 41>;
 				clock-names = "can_clk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/sama5d3_emac.dtsi b/arch/arm/boot/dts/sama5d3_emac.dtsi
index 9aef414bcd2e..45226108850d 100644
--- a/arch/arm/boot/dts/sama5d3_emac.dtsi
+++ b/arch/arm/boot/dts/sama5d3_emac.dtsi
@@ -31,12 +31,6 @@
 			};
 
 			pmc: pmc@fffffc00 {
-				periphck {
-					macb1_clk: macb1_clk {
-						#clock-cells = <0>;
-						reg = <35>;
-					};
-				};
 			};
 
 			macb1: ethernet@f802c000 {
@@ -45,7 +39,7 @@
 				interrupts = <35 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb1_rmii>;
-				clocks = <&macb1_clk>, <&macb1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_PERIPHERAL 35>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi
index 3667765a138b..884df7a54dbb 100644
--- a/arch/arm/boot/dts/sama5d3_gmac.dtsi
+++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi
@@ -63,22 +63,13 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					macb0_clk: macb0_clk {
-						#clock-cells = <0>;
-						reg = <34>;
-					};
-				};
-			};
-
 			macb0: ethernet@f0028000 {
 				compatible = "atmel,sama5d3-gem";
 				reg = <0xf0028000 0x100>;
 				interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_macb0_data_rgmii &pinctrl_macb0_signal_rgmii>;
-				clocks = <&macb0_clk>, <&macb0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>, <&pmc PMC_TYPE_PERIPHERAL 34>;
 				clock-names = "hclk", "pclk";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/sama5d3_lcd.dtsi b/arch/arm/boot/dts/sama5d3_lcd.dtsi
index 2cf046cd4e99..308d2fc276d6 100644
--- a/arch/arm/boot/dts/sama5d3_lcd.dtsi
+++ b/arch/arm/boot/dts/sama5d3_lcd.dtsi
@@ -16,7 +16,7 @@
 				compatible = "atmel,sama5d3-hlcdc";
 				reg = <0xf0030000 0x2000>;
 				interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
 				clock-names = "periph_clk","sys_clk", "slow_clk";
 				status = "disabled";
 
@@ -192,23 +192,6 @@
 					};
 				};
 			};
-
-			pmc: pmc@fffffc00 {
-				periphck {
-					lcdc_clk: lcdc_clk {
-						#clock-cells = <0>;
-						reg = <36>;
-					};
-				};
-
-				systemck {
-					lcdck: lcdck {
-						#clock-cells = <0>;
-						reg = <3>;
-						clocks = <&mck>;
-					};
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/sama5d3_mci2.dtsi b/arch/arm/boot/dts/sama5d3_mci2.dtsi
index 3c83c1c36ac8..7141ee97ec3e 100644
--- a/arch/arm/boot/dts/sama5d3_mci2.dtsi
+++ b/arch/arm/boot/dts/sama5d3_mci2.dtsi
@@ -30,15 +30,6 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					mci2_clk: mci2_clk {
-						#clock-cells = <0>;
-						reg = <23>;
-					};
-				};
-			};
-
 			mmc2: mmc@f8004000 {
 				compatible = "atmel,hsmci";
 				reg = <0xf8004000 0x600>;
@@ -47,7 +38,7 @@
 				dma-names = "rxtx";
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_mmc2_clk_cmd_dat0 &pinctrl_mmc2_dat1_3>;
-				clocks = <&mci2_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
 				clock-names = "mci_clk";
 				status = "disabled";
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/sama5d3_tcb1.dtsi b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
index 215802b8db30..2b18c5c2cc03 100644
--- a/arch/arm/boot/dts/sama5d3_tcb1.dtsi
+++ b/arch/arm/boot/dts/sama5d3_tcb1.dtsi
@@ -17,23 +17,13 @@
 
 	ahb {
 		apb {
-			pmc: pmc@fffffc00 {
-				periphck {
-					tcb1_clk: tcb1_clk {
-						#clock-cells = <0>;
-						reg = <27>;
-						atmel,clk-output-range = <0 166000000>;
-					};
-				};
-			};
-
 			tcb1: timer@f8014000 {
 				compatible = "atmel,at91sam9x5-tcb", "simple-mfd", "syscon";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				reg = <0xf8014000 0x100>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
-				clocks = <&tcb1_clk>, <&clk32k>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&clk32k>;
 				clock-names = "t0_clk", "slow_clk";
 			};
 		};
diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi
index cb62adbd28ed..a3eaba995cf4 100644
--- a/arch/arm/boot/dts/sama5d3_uart.dtsi
+++ b/arch/arm/boot/dts/sama5d3_uart.dtsi
@@ -36,29 +36,13 @@
 				};
 			};
 
-			pmc: pmc@fffffc00 {
-				periphck {
-					uart0_clk: uart0_clk {
-						#clock-cells = <0>;
-						reg = <16>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-
-					uart1_clk: uart1_clk {
-						#clock-cells = <0>;
-						reg = <17>;
-						atmel,clk-output-range = <0 83000000>;
-					};
-				};
-			};
-
 			uart0: serial@f0024000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf0024000 0x100>;
 				interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart0>;
-				clocks = <&uart0_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
 				clock-names = "usart";
 				status = "disabled";
 			};
@@ -69,7 +53,7 @@
 				interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&pinctrl_uart1>;
-				clocks = <&uart1_clk>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
 				clock-names = "usart";
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi
index 35031bbc7e70..a499de8a7a64 100644
--- a/arch/arm/boot/dts/sama5d3xmb.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb.dtsi
@@ -46,7 +46,7 @@
 				wm8904: wm8904@1a {
 					compatible = "wlf,wm8904";
 					reg = <0x1a>;
-					clocks = <&pck0>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
 					clock-names = "mclk";
 				};
 			};
@@ -60,9 +60,9 @@
 					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
 					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
 					/* use pck1 for the master clock of ov2640 */
-					clocks = <&pck1>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
 					clock-names = "xvclk";
-					assigned-clocks = <&pck1>;
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
 					assigned-clock-rates = <25000000>;
 
 					port {
diff --git a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
index 8a6916a69da4..fa9e5e2a745d 100644
--- a/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
+++ b/arch/arm/boot/dts/sama5d3xmb_cmp.dtsi
@@ -45,7 +45,7 @@
 				wm8904: wm8904@1a {
 					compatible = "wlf,wm8904";
 					reg = <0x1a>;
-					clocks = <&pck0>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 8>;
 					clock-names = "mclk";
 				};
 			};
@@ -59,9 +59,9 @@
 					resetb-gpios = <&pioE 24 GPIO_ACTIVE_LOW>;
 					pwdn-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
 					/* use pck1 for the master clock of ov2640 */
-					clocks = <&pck1>;
+					clocks = <&pmc PMC_TYPE_SYSTEM 9>;
 					clock-names = "xvclk";
-					assigned-clocks = <&pck1>;
+					assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
 					assigned-clock-rates = <25000000>;
 
 					port {
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index c9c0316b5b0e..fff679734c9c 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -462,7 +462,7 @@
 				pinctrl-0 = <&pinctrl_i2c0>;
 				pinctrl-1 = <&pinctrl_i2c0_gpio>;
 				sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioA 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 32>;
@@ -484,7 +484,7 @@
 				pinctrl-0 = <&pinctrl_i2c1>;
 				pinctrl-1 = <&pinctrl_i2c1_gpio>;
 				sda-gpios = <&pioE 29 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioE 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioE 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
@@ -529,7 +529,7 @@
 				pinctrl-0 = <&pinctrl_i2c2>;
 				pinctrl-1 = <&pinctrl_i2c2_gpio>;
 				sda-gpios = <&pioB 29 GPIO_ACTIVE_HIGH>;
-				scl-gpios = <&pioB 30 GPIO_ACTIVE_HIGH>;
+				scl-gpios = <&pioB 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi
index c134154bcce8..01fd06328420 100644
--- a/arch/arm/boot/dts/sh73a0.dtsi
+++ b/arch/arm/boot/dts/sh73a0.dtsi
@@ -99,7 +99,7 @@
 	};
 
 	cmt1: timer@e6138000 {
-		compatible = "renesas,cmt-48-sh73a0", "renesas,cmt-48";
+		compatible = "renesas,sh73a0-cmt1";
 		reg = <0xe6138000 0x200>;
 		interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&mstp3_clks SH73A0_CLK_CMT1>;
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 4f3993cc0227..c2b54af417a2 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -531,6 +531,7 @@
 			reg = <0xff400000 0x100000>;
 			resets = <&rst LWHPS2FPGA_RESET>;
 			clocks = <&l4_main_clk>;
+			status = "disabled";
 		};
 
 		fpga_bridge1: fpga_bridge@ff500000 {
@@ -538,6 +539,21 @@
 			reg = <0xff500000 0x10000>;
 			resets = <&rst HPS2FPGA_RESET>;
 			clocks = <&l4_main_clk>;
+			status = "disabled";
+		};
+
+		fpga_bridge2: fpga-bridge@ff600000 {
+			compatible = "altr,socfpga-fpga2hps-bridge";
+			reg = <0xff600000 0x100000>;
+			resets = <&rst FPGA2HPS_RESET>;
+			clocks = <&l4_main_clk>;
+			status = "disabled";
+		};
+
+		fpga_bridge3: fpga-bridge@ffc25080 {
+			compatible = "altr,socfpga-fpga2sdram-bridge";
+			reg = <0xffc25080 0x4>;
+			status = "disabled";
 		};
 
 		fpgamgr0: fpgamgr@ff706000 {
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
index 313f0ab16866..5b499c0b2745 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts
@@ -24,6 +24,26 @@
 		stdout-path = &serial2;
 	};
 
+	i2c-gpio-1 {
+		compatible = "i2c-gpio";
+		sda-gpios = <&gpio4 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio4 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&i2c_gpio_1_default>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		magnetometer@c {
+			compatible = "alps,hscdtd008a";
+			reg = <0x0c>;
+
+			avdd-supply = <&ab8500_ldo_aux1_reg>;
+			dvdd-supply = <&ab8500_ldo_aux8_reg>;
+		};
+	};
+
 	soc {
 		/* External Micro SD card slot */
 		sdi0_per1@80126000 {
@@ -146,6 +166,32 @@
 			pinctrl-1 = <&u2rxtx_c_1_sleep>;
 		};
 
+		i2c@80004000 {
+			status = "okay";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&i2c0_a_1_default>;
+			pinctrl-1 = <&i2c0_a_1_sleep>;
+
+			proximity@44 {
+				compatible = "sharp,gp2ap002s00f";
+				reg = <0x44>;
+
+				/* GPIO146 (PS_INT) */
+				interrupt-parent = <&gpio4>;
+				interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
+
+				vdd-supply = <&ab8500_ldo_aux1_reg>;
+				vio-supply = <&ab8500_ldo_aux8_reg>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&proximity_default>;
+
+				sharp,proximity-far-hysteresis = <0x40>;
+				sharp,proximity-close-hysteresis = <0x0f>;
+			};
+		};
+
 		i2c@80128000 {
 			status = "okay";
 
@@ -357,6 +403,16 @@
 		};
 	};
 
+	i2c-gpio-1 {
+		i2c_gpio_1_default: i2c_gpio_1 {
+			golden_cfg1 {
+				pins = "GPIO151",	/* COMP_SCL */
+				       "GPIO152";	/* COMP_SDA */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
 	sdi0 {
 		sd_level_translator_default: sd_level_translator_default {
 			golden_cfg1 {
@@ -375,6 +431,15 @@
 		};
 	};
 
+	proximity {
+		proximity_default: proximity_default {
+			golden_cfg1 {
+				pins = "GPIO146_D13";	/* PS_INT */
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
+
 	imu {
 		imu_default: imu_default {
 			golden_cfg1 {
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
index 292ed5286652..8edef161613a 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts
@@ -140,7 +140,12 @@
 		pinctrl-0 = <&i2c_gpio_1_default>;
 		#address-cells = <1>;
 		#size-cells = <0>;
-		/* TODO: this should be used by the ALPS HSCDTD008A compass sensor */
+		magnetometer@c {
+			compatible = "alps,hscdtd008a";
+			reg = <0x0c>;
+			avdd-supply = <&ab8500_ldo_aux1_reg>;
+			dvdd-supply = <&ab8500_ldo_aux8_reg>;
+		};
 	};
 
 	soc {
@@ -362,7 +367,28 @@
 			pinctrl-0 = <&i2c3_c_2_default>;
 			pinctrl-1 = <&i2c3_c_2_sleep>;
 
-			/* TODO: this should be used by the Cypress TMA140 touchscreen */
+			/* Cypress CY8CTMA140 touchscreen */
+			touchscreen@20 {
+				compatible = "cypress,cy8ctma140";
+				clock-frequency = <400000>;
+				reg = <0x20>;
+
+				touchscreen-size-x = <480>;
+				touchscreen-size-y = <800>;
+				touchscreen-max-pressure = <255>;
+
+				/* GPIO218 for IRQ */
+				interrupt-parent = <&gpio6>;
+				interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
+
+				/* VDD is "digital supply" nominally 1.71-3.6V */
+				vdd-supply = <&ab8500_ldo_aux2_reg>;
+				/* VCPIN is "analog supply", 2.7-3.6 V */
+				vcpin-supply = <&ab8500_ldo_aux2_reg>;
+
+				pinctrl-names = "default";
+				pinctrl-0 = <&tma140_skomer_default>;
+			};
 		};
 
 		mcde@a0350000 {
@@ -557,6 +583,15 @@
 			};
 		};
 	};
+	/* Interrupt line for the Cypress TMA140 touchscreen */
+	touchscreen {
+		tma140_skomer_default: tma140_skomer {
+			skomer_cfg1 {
+				pins = "GPIO218_AH11";
+				ste,config = <&gpio_in_nopull>;
+			};
+		};
+	};
 };
 
 &ab8505_gpio {
diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
index 7c36c37260a4..23a1746f3baa 100644
--- a/arch/arm/boot/dts/stih407-family.dtsi
+++ b/arch/arm/boot/dts/stih407-family.dtsi
@@ -767,20 +767,6 @@
 				 <&clk_s_c0_flexgen CLK_ETH_PHY>;
 		};
 
-		rng10: rng@8a89000 {
-			compatible      = "st,rng";
-			reg		= <0x08a89000 0x1000>;
-			clocks          = <&clk_sysin>;
-			status		= "okay";
-		};
-
-		rng11: rng@8a8a000 {
-			compatible      = "st,rng";
-			reg		= <0x08a8a000 0x1000>;
-			clocks          = <&clk_sysin>;
-			status		= "okay";
-		};
-
 		mailbox0: mailbox@8f00000  {
 			compatible	= "st,stih407-mailbox";
 			reg		= <0x8f00000 0x1000>;
diff --git a/arch/arm/boot/dts/stih418.dtsi b/arch/arm/boot/dts/stih418.dtsi
index 83411322bd92..a05e2278b448 100644
--- a/arch/arm/boot/dts/stih418.dtsi
+++ b/arch/arm/boot/dts/stih418.dtsi
@@ -50,7 +50,7 @@
 		ohci0: usb@9a03c00 {
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a03c00 0x100>;
-			interrupts = <GIC_SPI 180 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT0_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT0_SOFTRESET>;
@@ -62,7 +62,7 @@
 		ehci0: usb@9a03e00 {
 			compatible = "st,st-ehci-300x";
 			reg = <0x9a03e00 0x100>;
-			interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb0>;
 			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
@@ -76,7 +76,7 @@
 		ohci1: usb@9a83c00 {
 			compatible = "st,st-ohci-300x";
 			reg = <0x9a83c00 0x100>;
-			interrupts = <GIC_SPI 181 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
 			resets = <&powerdown STIH407_USB2_PORT1_POWERDOWN>,
 				 <&softreset STIH407_USB2_PORT1_SOFTRESET>;
@@ -88,7 +88,7 @@
 		ehci1: usb@9a83e00 {
 			compatible = "st,st-ehci-300x";
 			reg = <0x9a83e00 0x100>;
-			interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_usb1>;
 			clocks = <&clk_s_c0_flexgen CLK_TX_ICN_DISP_0>;
diff --git a/arch/arm/boot/dts/stm32f429.dtsi b/arch/arm/boot/dts/stm32f429.dtsi
index d7770699feb5..393f43c85a3c 100644
--- a/arch/arm/boot/dts/stm32f429.dtsi
+++ b/arch/arm/boot/dts/stm32f429.dtsi
@@ -414,14 +414,14 @@
 
 			dac1: dac@1 {
 				compatible = "st,stm32-dac";
-				#io-channels-cells = <1>;
+				#io-channel-cells = <1>;
 				reg = <1>;
 				status = "disabled";
 			};
 
 			dac2: dac@2 {
 				compatible = "st,stm32-dac";
-				#io-channels-cells = <1>;
+				#io-channel-cells = <1>;
 				reg = <2>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/stm32h743.dtsi b/arch/arm/boot/dts/stm32h743.dtsi
index 05eb02e6d083..9b7fc68380e9 100644
--- a/arch/arm/boot/dts/stm32h743.dtsi
+++ b/arch/arm/boot/dts/stm32h743.dtsi
@@ -180,14 +180,14 @@
 
 			dac1: dac@1 {
 				compatible = "st,stm32-dac";
-				#io-channels-cells = <1>;
+				#io-channel-cells = <1>;
 				reg = <1>;
 				status = "disabled";
 			};
 
 			dac2: dac@2 {
 				compatible = "st,stm32-dac";
-				#io-channels-cells = <1>;
+				#io-channel-cells = <1>;
 				reg = <2>;
 				status = "disabled";
 			};
diff --git a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
index 73c07f0dfad2..7eb858732d6d 100644
--- a/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stm32mp15-pinctrl.dtsi
@@ -6,7 +6,7 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
-	adc1_in6_pins_a: adc1-in6 {
+	adc1_in6_pins_a: adc1-in6-0 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 12, ANALOG)>;
 		};
@@ -21,6 +21,13 @@
 		};
 	};
 
+	adc12_ain_pins_b: adc12-ain-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */
+				 <STM32_PINMUX('F', 13, ANALOG)>; /* ADC2 in2 */
+		};
+	};
+
 	adc12_usb_cc_pins_a: adc12-usb-cc-pins-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* ADC12 in18 */
@@ -37,7 +44,7 @@
 		};
 	};
 
-	cec_pins_sleep_a: cec-sleep-0 {
+	cec_sleep_pins_a: cec-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 15, ANALOG)>; /* HDMI_CEC */
 		};
@@ -52,19 +59,19 @@
 		};
 	};
 
-	cec_pins_sleep_b: cec-sleep-1 {
+	cec_sleep_pins_b: cec-sleep-1 {
 		pins {
 			pinmux = <STM32_PINMUX('B', 6, ANALOG)>; /* HDMI_CEC */
 		};
 	};
 
-	dac_ch1_pins_a: dac-ch1 {
+	dac_ch1_pins_a: dac-ch1-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 4, ANALOG)>;
 		};
 	};
 
-	dac_ch2_pins_a: dac-ch2 {
+	dac_ch2_pins_a: dac-ch2-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 5, ANALOG)>;
 		};
@@ -142,7 +149,7 @@
 		};
 	};
 
-	ethernet0_rgmii_pins_sleep_a: rgmii-sleep-0 {
+	ethernet0_rgmii_sleep_pins_a: rgmii-sleep-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
 				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
@@ -162,6 +169,108 @@
 		};
 	};
 
+	ethernet0_rgmii_pins_b: rgmii-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_sleep_pins_b: rgmii-sleep-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+			         <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+			         <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 7, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		 };
+	};
+
+	ethernet0_rgmii_pins_c: rgmii-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, AF11)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('G', 11, AF11)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+	};
+
+	ethernet0_rgmii_sleep_pins_c: rgmii-sleep-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('G', 4, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('B', 12, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RGMII_RX_CLK */
+				 <STM32_PINMUX('A', 7, ANALOG)>; /* ETH_RGMII_RX_CTL */
+		};
+	};
+
 	ethernet0_rmii_pins_a: rmii-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH1_RMII_TXD0 */
@@ -182,7 +291,7 @@
 		};
 	};
 
-	ethernet0_rmii_pins_sleep_a: rmii-sleep-0 {
+	ethernet0_rmii_sleep_pins_a: rmii-sleep-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH1_RMII_TXD0 */
 				 <STM32_PINMUX('G', 14, ANALOG)>, /* ETH1_RMII_TXD1 */
@@ -250,14 +359,14 @@
 		};
 	};
 
-	i2c1_pins_sleep_a: i2c1-1 {
+	i2c1_sleep_pins_a: i2c1-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
 				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
 		};
 	};
 
-	i2c1_pins_b: i2c1-2 {
+	i2c1_pins_b: i2c1-1 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 14, AF5)>, /* I2C1_SCL */
 				 <STM32_PINMUX('F', 15, AF5)>; /* I2C1_SDA */
@@ -267,7 +376,7 @@
 		};
 	};
 
-	i2c1_pins_sleep_b: i2c1-3 {
+	i2c1_sleep_pins_b: i2c1-sleep-1 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 14, ANALOG)>, /* I2C1_SCL */
 				 <STM32_PINMUX('F', 15, ANALOG)>; /* I2C1_SDA */
@@ -284,14 +393,14 @@
 		};
 	};
 
-	i2c2_pins_sleep_a: i2c2-1 {
+	i2c2_sleep_pins_a: i2c2-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('H', 4, ANALOG)>, /* I2C2_SCL */
 				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
 		};
 	};
 
-	i2c2_pins_b1: i2c2-2 {
+	i2c2_pins_b1: i2c2-1 {
 		pins {
 			pinmux = <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
 			bias-disable;
@@ -300,12 +409,29 @@
 		};
 	};
 
-	i2c2_pins_sleep_b1: i2c2-3 {
+	i2c2_sleep_pins_b1: i2c2-sleep-1 {
 		pins {
 			pinmux = <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
 		};
 	};
 
+	i2c2_pins_c: i2c2-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 1, AF4)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, AF4)>; /* I2C2_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c2_pins_sleep_c: i2c2-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 1, ANALOG)>, /* I2C2_SCL */
+				 <STM32_PINMUX('H', 5, ANALOG)>; /* I2C2_SDA */
+		};
+	};
+
 	i2c5_pins_a: i2c5-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 11, AF4)>, /* I2C5_SCL */
@@ -316,7 +442,7 @@
 		};
 	};
 
-	i2c5_pins_sleep_a: i2c5-1 {
+	i2c5_sleep_pins_a: i2c5-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C5_SCL */
 				 <STM32_PINMUX('A', 12, ANALOG)>; /* I2C5_SDA */
@@ -324,6 +450,23 @@
 		};
 	};
 
+	i2c5_pins_b: i2c5-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
+			         <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
+			bias-disable;
+			drive-open-drain;
+			slew-rate = <0>;
+		};
+	};
+
+	i2c5_sleep_pins_b: i2c5-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 0, ANALOG)>, /* I2C5_SCL */
+			         <STM32_PINMUX('D', 1, ANALOG)>; /* I2C5_SDA */
+		};
+	};
+
 	i2s2_pins_a: i2s2-0 {
 		pins {
 			pinmux = <STM32_PINMUX('I', 3, AF5)>, /* I2S2_SDO */
@@ -335,7 +478,7 @@
 		};
 	};
 
-	i2s2_pins_sleep_a: i2s2-1 {
+	i2s2_sleep_pins_a: i2s2-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('I', 3, ANALOG)>, /* I2S2_SDO */
 				 <STM32_PINMUX('B', 9, ANALOG)>, /* I2S2_WS */
@@ -343,7 +486,7 @@
 		};
 	};
 
-	ltdc_pins_a: ltdc-a-0 {
+	ltdc_pins_a: ltdc-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G',  7, AF14)>, /* LCD_CLK */
 				 <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
@@ -379,7 +522,7 @@
 		};
 	};
 
-	ltdc_pins_sleep_a: ltdc-a-1 {
+	ltdc_sleep_pins_a: ltdc-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
 				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
@@ -412,7 +555,7 @@
 		};
 	};
 
-	ltdc_pins_b: ltdc-b-0 {
+	ltdc_pins_b: ltdc-1 {
 		pins {
 			pinmux = <STM32_PINMUX('I', 14, AF14)>, /* LCD_CLK */
 				 <STM32_PINMUX('I', 12, AF14)>, /* LCD_HSYNC */
@@ -448,7 +591,7 @@
 		};
 	};
 
-	ltdc_pins_sleep_b: ltdc-b-1 {
+	ltdc_sleep_pins_b: ltdc-sleep-1 {
 		pins {
 			pinmux = <STM32_PINMUX('I', 14, ANALOG)>, /* LCD_CLK */
 				 <STM32_PINMUX('I', 12, ANALOG)>, /* LCD_HSYNC */
@@ -481,6 +624,142 @@
 		};
 	};
 
+	ltdc_pins_c: ltdc-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B',  1, AF9)>,  /* LTDC_R6 */
+				 <STM32_PINMUX('B',  9, AF14)>, /* LTDC_B7 */
+				 <STM32_PINMUX('C',  0, AF14)>, /* LTDC_R5 */
+				 <STM32_PINMUX('D',  3, AF14)>, /* LTDC_G7 */
+				 <STM32_PINMUX('D',  6, AF14)>, /* LTDC_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
+				 <STM32_PINMUX('E', 11, AF14)>, /* LTDC_G3 */
+				 <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */
+				 <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
+				 <STM32_PINMUX('H',  4, AF9)>,  /* LTDC_G5 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LTDC_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LTDC_R3 */
+				 <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
+				 <STM32_PINMUX('I',  1, AF14)>, /* LTDC_G6 */
+				 <STM32_PINMUX('I',  5, AF14)>, /* LTDC_B5 */
+				 <STM32_PINMUX('I',  6, AF14)>, /* LTDC_B6 */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LTDC_VSYNC */
+				 <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 14, AF14)>; /* LTDC_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+	};
+
+	ltdc_sleep_pins_c: ltdc-sleep-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 1, ANALOG)>,  /* LTDC_R6 */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* LTDC_B7 */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* LTDC_R5 */
+				 <STM32_PINMUX('D', 3, ANALOG)>, /* LTDC_G7 */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* LTDC_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LTDC_B3 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* LTDC_G3 */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* LTDC_B4 */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* LTDC_DE */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LTDC_R7 */
+				 <STM32_PINMUX('H', 4, ANALOG)>,  /* LTDC_G5 */
+				 <STM32_PINMUX('H', 8, ANALOG)>, /* LTDC_R2 */
+				 <STM32_PINMUX('H', 9, ANALOG)>, /* LTDC_R3 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* LTDC_R4 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LTDC_G2 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LTDC_G4 */
+				 <STM32_PINMUX('I', 1, ANALOG)>, /* LTDC_G6 */
+				 <STM32_PINMUX('I', 5, ANALOG)>, /* LTDC_B5 */
+				 <STM32_PINMUX('I', 6, ANALOG)>, /* LTDC_B6 */
+				 <STM32_PINMUX('I', 9, ANALOG)>, /* LTDC_VSYNC */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LTDC_HSYNC */
+				 <STM32_PINMUX('E', 14, ANALOG)>; /* LTDC_CLK */
+		};
+	};
+
+	ltdc_pins_d: ltdc-3 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G',  7, AF14)>; /* LCD_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 10, AF14)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, AF14)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('E', 13, AF14)>, /* LCD_DE */
+				 <STM32_PINMUX('G', 13, AF14)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, AF14)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, AF14)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, AF14)>, /* LCD_R3 */
+				 <STM32_PINMUX('A',  5, AF14)>, /* LCD_R4 */
+				 <STM32_PINMUX('H', 11, AF14)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, AF14)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, AF14)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, AF14)>, /* LCD_G0 */
+				 <STM32_PINMUX('B',  0, AF14)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, AF14)>, /* LCD_G2 */
+				 <STM32_PINMUX('E', 11, AF14)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, AF14)>, /* LCD_G4 */
+				 <STM32_PINMUX('H',  4,  AF9)>, /* LCD_G5 */
+				 <STM32_PINMUX('I', 11,  AF9)>, /* LCD_G6 */
+				 <STM32_PINMUX('G',  8, AF14)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, AF14)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, AF14)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, AF14)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, AF14)>, /* LCD_B3 */
+				 <STM32_PINMUX('E', 12, AF14)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, AF14)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, AF14)>, /* LCD_B6 */
+				 <STM32_PINMUX('I',  7, AF14)>; /* LCD_B7 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	ltdc_sleep_pins_d: ltdc-sleep-3 {
+		pins {
+			pinmux = <STM32_PINMUX('G',  7, ANALOG)>, /* LCD_CLK */
+				 <STM32_PINMUX('I', 10, ANALOG)>, /* LCD_HSYNC */
+				 <STM32_PINMUX('I',  9, ANALOG)>, /* LCD_VSYNC */
+				 <STM32_PINMUX('E', 13, ANALOG)>, /* LCD_DE */
+				 <STM32_PINMUX('G', 13, ANALOG)>, /* LCD_R0 */
+				 <STM32_PINMUX('H',  3, ANALOG)>, /* LCD_R1 */
+				 <STM32_PINMUX('H',  8, ANALOG)>, /* LCD_R2 */
+				 <STM32_PINMUX('H',  9, ANALOG)>, /* LCD_R3 */
+				 <STM32_PINMUX('A',  5, ANALOG)>, /* LCD_R4 */
+				 <STM32_PINMUX('H', 11, ANALOG)>, /* LCD_R5 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* LCD_R6 */
+				 <STM32_PINMUX('E', 15, ANALOG)>, /* LCD_R7 */
+				 <STM32_PINMUX('E',  5, ANALOG)>, /* LCD_G0 */
+				 <STM32_PINMUX('B',  0, ANALOG)>, /* LCD_G1 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* LCD_G2 */
+				 <STM32_PINMUX('E', 11, ANALOG)>, /* LCD_G3 */
+				 <STM32_PINMUX('H', 15, ANALOG)>, /* LCD_G4 */
+				 <STM32_PINMUX('H',  4, ANALOG)>, /* LCD_G5 */
+				 <STM32_PINMUX('I', 11, ANALOG)>, /* LCD_G6 */
+				 <STM32_PINMUX('G',  8, ANALOG)>, /* LCD_G7 */
+				 <STM32_PINMUX('D',  9, ANALOG)>, /* LCD_B0 */
+				 <STM32_PINMUX('G', 12, ANALOG)>, /* LCD_B1 */
+				 <STM32_PINMUX('G', 10, ANALOG)>, /* LCD_B2 */
+				 <STM32_PINMUX('D', 10, ANALOG)>, /* LCD_B3 */
+				 <STM32_PINMUX('E', 12, ANALOG)>, /* LCD_B4 */
+				 <STM32_PINMUX('A',  3, ANALOG)>, /* LCD_B5 */
+				 <STM32_PINMUX('B',  8, ANALOG)>, /* LCD_B6 */
+				 <STM32_PINMUX('I',  7, ANALOG)>; /* LCD_B7 */
+		};
+	};
+
 	m_can1_pins_a: m-can1-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('H', 13, AF9)>; /* CAN1_TX */
@@ -501,6 +780,46 @@
 		};
 	};
 
+	m_can1_pins_b: m-can1-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 12, AF9)>; /* CAN1_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('A', 11, AF9)>; /* CAN1_RX */
+			bias-disable;
+		};
+	};
+
+	m_can1_sleep_pins_b: m_can1-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 12, ANALOG)>, /* CAN1_TX */
+				 <STM32_PINMUX('A', 11, ANALOG)>; /* CAN1_RX */
+		};
+	};
+
+	m_can2_pins_a: m-can2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 13, AF9)>; /* CAN2_TX */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 5, AF9)>; /* CAN2_RX */
+			bias-disable;
+		};
+	};
+
+	m_can2_sleep_pins_a: m_can2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 13, ANALOG)>, /* CAN2_TX */
+				 <STM32_PINMUX('B', 5, ANALOG)>; /* CAN2_RX */
+		};
+	};
+
 	pwm1_pins_a: pwm1-0 {
 		pins {
 			pinmux = <STM32_PINMUX('E', 9, AF1)>, /* TIM1_CH1 */
@@ -550,6 +869,21 @@
 		};
 	};
 
+	pwm3_pins_b: pwm3-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm3_sleep_pins_b: pwm3-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* TIM3_CH2 */
+		};
+	};
+
 	pwm4_pins_a: pwm4-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 14, AF2)>, /* TIM4_CH3 */
@@ -597,6 +931,25 @@
 		};
 	};
 
+	pwm5_pins_b: pwm5-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, AF2)>, /* TIM5_CH2 */
+				 <STM32_PINMUX('H', 12, AF2)>, /* TIM5_CH3 */
+				 <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm5_sleep_pins_b: pwm5-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 11, ANALOG)>, /* TIM5_CH2 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* TIM5_CH3 */
+				 <STM32_PINMUX('I', 0, ANALOG)>; /* TIM5_CH4 */
+		};
+	};
+
 	pwm8_pins_a: pwm8-0 {
 		pins {
 			pinmux = <STM32_PINMUX('I', 2, AF3)>; /* TIM8_CH4 */
@@ -710,7 +1063,7 @@
 		};
 	};
 
-	sai2a_sleep_pins_a: sai2a-1 {
+	sai2a_sleep_pins_a: sai2a-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('I', 5, ANALOG)>, /* SAI2_SCK_A */
 				 <STM32_PINMUX('I', 6, ANALOG)>, /* SAI2_SD_A */
@@ -720,7 +1073,7 @@
 	};
 
 
-	sai2a_pins_b: sai2a-2 {
+	sai2a_pins_b: sai2a-1 {
 		pins1 {
 			pinmux = <STM32_PINMUX('I', 6, AF10)>,	/* SAI2_SD_A */
 				 <STM32_PINMUX('I', 7, AF10)>,	/* SAI2_FS_A */
@@ -731,7 +1084,7 @@
 		};
 	};
 
-	sai2a_sleep_pins_b: sai2a-sleep-3 {
+	sai2a_sleep_pins_b: sai2a-sleep-1 {
 		pins {
 			pinmux = <STM32_PINMUX('I', 6, ANALOG)>,  /* SAI2_SD_A */
 				 <STM32_PINMUX('I', 7, ANALOG)>,  /* SAI2_FS_A */
@@ -739,6 +1092,25 @@
 		};
 	};
 
+	sai2a_pins_c: sai2a-4 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, AF10)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D', 11, AF10)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('D', 12, AF10)>; /* SAI2_FS_A */
+			slew-rate = <0>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sai2a_sleep_pins_c: sai2a-5 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 13, ANALOG)>, /* SAI2_SCK_A */
+				 <STM32_PINMUX('D', 11, ANALOG)>, /* SAI2_SD_A */
+				 <STM32_PINMUX('D', 12, ANALOG)>; /* SAI2_FS_A */
+		};
+	};
+
 	sai2b_pins_a: sai2b-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 12, AF10)>, /* SAI2_SCK_B */
@@ -754,7 +1126,7 @@
 		};
 	};
 
-	sai2b_sleep_pins_a: sai2b-1 {
+	sai2b_sleep_pins_a: sai2b-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* SAI2_SD_B */
 				 <STM32_PINMUX('E', 12, ANALOG)>, /* SAI2_SCK_B */
@@ -763,14 +1135,27 @@
 		};
 	};
 
-	sai2b_pins_b: sai2b-2 {
+	sai2b_pins_b: sai2b-1 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
 			bias-disable;
 		};
 	};
 
-	sai2b_sleep_pins_b: sai2b-3 {
+	sai2b_sleep_pins_b: sai2b-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
+		};
+	};
+
+	sai2b_pins_c: sai2a-4 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 11, AF10)>; /* SAI2_SD_B */
+			bias-disable;
+		};
+	};
+
+	sai2b_sleep_pins_c: sai2a-sleep-5 {
 		pins {
 			pinmux = <STM32_PINMUX('F', 11, ANALOG)>; /* SAI2_SD_B */
 		};
@@ -785,7 +1170,7 @@
 		};
 	};
 
-	sai4a_sleep_pins_a: sai4a-1 {
+	sai4a_sleep_pins_a: sai4a-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('B', 5, ANALOG)>; /* SAI4_SD_A */
 		};
@@ -869,6 +1254,30 @@
 		};
 	};
 
+	sdmmc1_dir_pins_b: sdmmc1-dir-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 2, AF11)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('E', 14, AF11)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, AF11)>; /* SDMMC1_CDIR */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2{
+			pinmux = <STM32_PINMUX('E', 4, AF8)>; /* SDMMC1_CKIN */
+			bias-pull-up;
+		};
+	};
+
+	sdmmc1_dir_sleep_pins_b: sdmmc1-dir-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 2, ANALOG)>, /* SDMMC1_D0DIR */
+				 <STM32_PINMUX('E', 14, ANALOG)>, /* SDMMC1_D123DIR */
+				 <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC1_CDIR */
+				 <STM32_PINMUX('E', 4, ANALOG)>; /* SDMMC1_CKIN */
+		};
+	};
+
 	sdmmc2_b4_pins_a: sdmmc2-b4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
@@ -987,6 +1396,48 @@
 		};
 	};
 
+	sdmmc2_d47_pins_b: sdmmc2-d47-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>,  /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-disable;
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_b: sdmmc2-d47-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
+	sdmmc2_d47_pins_c: sdmmc2-d47-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 15, AF9)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc2_d47_sleep_pins_c: sdmmc2-d47-sleep-2 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+				 <STM32_PINMUX('A', 15, ANALOG)>, /* SDMMC2_D5 */
+				 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+				 <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */
+		};
+	};
+
 	sdmmc3_b4_pins_a: sdmmc3-b4-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
@@ -1041,6 +1492,60 @@
 		};
 	};
 
+	sdmmc3_b4_pins_b: sdmmc3-b4-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_od_pins_b: sdmmc3-b4-od-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF9)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, AF9)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
+			slew-rate = <1>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */
+			slew-rate = <2>;
+			drive-push-pull;
+			bias-pull-up;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('D', 0, AF10)>; /* SDMMC2_CMD */
+			slew-rate = <1>;
+			drive-open-drain;
+			bias-pull-up;
+		};
+	};
+
+	sdmmc3_b4_sleep_pins_b: sdmmc3-b4-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC3_D0 */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* SDMMC3_D1 */
+				 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+				 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+				 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+				 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
+		};
+	};
+
 	spdifrx_pins_a: spdifrx-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G', 12, AF8)>; /* SPDIF_IN1 */
@@ -1048,12 +1553,75 @@
 		};
 	};
 
-	spdifrx_sleep_pins_a: spdifrx-1 {
+	spdifrx_sleep_pins_a: spdifrx-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('G', 12, ANALOG)>; /* SPDIF_IN1 */
 		};
 	};
 
+	spi2_pins_a: spi2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI1_SCK */
+				 <STM32_PINMUX('I', 3, AF5)>; /* SPI1_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+
+		pins2 {
+			pinmux = <STM32_PINMUX('I', 2, AF5)>; /* SPI1_MISO */
+			bias-disable;
+		};
+	};
+
+	usart2_pins_a: usart2-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('D', 6, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_a: usart2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('D', 4, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('D', 6, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('D', 3, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
+	usart2_pins_b: usart2-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 5, AF7)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 4, AF7)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, AF7)>; /* USART2_CTS_NSS */
+			bias-disable;
+		};
+	};
+
+	usart2_sleep_pins_b: usart2-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('F', 5, ANALOG)>, /* USART2_TX */
+				 <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */
+				 <STM32_PINMUX('F', 4, ANALOG)>, /* USART2_RX */
+				 <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */
+		};
+	};
+
 	usart3_pins_a: usart3-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('B', 10, AF7)>; /* USART3_TX */
@@ -1093,6 +1661,19 @@
 		};
 	};
 
+	uart4_pins_c: uart4-2 {
+		pins1 {
+			pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+			bias-disable;
+		};
+	};
+
 	uart7_pins_a: uart7-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 8, AF7)>; /* UART4_TX */
@@ -1108,6 +1689,19 @@
 		};
 	};
 
+	uart7_pins_b: uart7-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 7, AF7)>; /* UART7_TX */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 6, AF7)>; /* UART7_RX */
+			bias-disable;
+		};
+	};
+
 	uart8_pins_a: uart8-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */
@@ -1145,7 +1739,7 @@
 		};
 	};
 
-	i2c2_pins_sleep_b2: i2c2-1 {
+	i2c2_sleep_pins_b2: i2c2-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('Z', 0, ANALOG)>; /* I2C2_SCL */
 		};
@@ -1161,7 +1755,7 @@
 		};
 	};
 
-	i2c4_pins_sleep_a: i2c4-1 {
+	i2c4_sleep_pins_a: i2c4-sleep-0 {
 		pins {
 			pinmux = <STM32_PINMUX('Z', 4, ANALOG)>, /* I2C4_SCL */
 				 <STM32_PINMUX('Z', 5, ANALOG)>; /* I2C4_SDA */
@@ -1182,4 +1776,18 @@
 			bias-disable;
 		};
 	};
+
+	spi4_pins_a: spi4-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 12, AF5)>, /* SPI4_SCK */
+				 <STM32_PINMUX('E', 6, AF5)>;  /* SPI4_MOSI */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <1>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('E', 13, AF5)>; /* SPI4_MISO */
+			bias-disable;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/stm32mp151.dtsi b/arch/arm/boot/dts/stm32mp151.dtsi
index 3ea05ba48215..36f38a95b4de 100644
--- a/arch/arm/boot/dts/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/stm32mp151.dtsi
@@ -24,10 +24,8 @@
 	};
 
 	psci {
-		compatible = "arm,psci";
+		compatible = "arm,psci-1.0";
 		method = "smc";
-		cpu_off = <0x84000002>;
-		cpu_on = <0x84000003>;
 	};
 
 	intc: interrupt-controller@a0021000 {
@@ -475,7 +473,7 @@
 		};
 
 		i2c1: i2c@40012000 {
-			compatible = "st,stm32f7-i2c";
+			compatible = "st,stm32mp15-i2c";
 			reg = <0x40012000 0x400>;
 			interrupt-names = "event", "error";
 			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
@@ -484,12 +482,13 @@
 			resets = <&rcc I2C1_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x1>;
 			wakeup-source;
 			status = "disabled";
 		};
 
 		i2c2: i2c@40013000 {
-			compatible = "st,stm32f7-i2c";
+			compatible = "st,stm32mp15-i2c";
 			reg = <0x40013000 0x400>;
 			interrupt-names = "event", "error";
 			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
@@ -498,12 +497,13 @@
 			resets = <&rcc I2C2_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x2>;
 			wakeup-source;
 			status = "disabled";
 		};
 
 		i2c3: i2c@40014000 {
-			compatible = "st,stm32f7-i2c";
+			compatible = "st,stm32mp15-i2c";
 			reg = <0x40014000 0x400>;
 			interrupt-names = "event", "error";
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
@@ -512,12 +512,13 @@
 			resets = <&rcc I2C3_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x4>;
 			wakeup-source;
 			status = "disabled";
 		};
 
 		i2c5: i2c@40015000 {
-			compatible = "st,stm32f7-i2c";
+			compatible = "st,stm32mp15-i2c";
 			reg = <0x40015000 0x400>;
 			interrupt-names = "event", "error";
 			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
@@ -526,6 +527,7 @@
 			resets = <&rcc I2C5_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x10>;
 			wakeup-source;
 			status = "disabled";
 		};
@@ -550,14 +552,14 @@
 
 			dac1: dac@1 {
 				compatible = "st,stm32-dac";
-				#io-channels-cells = <1>;
+				#io-channel-cells = <1>;
 				reg = <1>;
 				status = "disabled";
 			};
 
 			dac2: dac@2 {
 				compatible = "st,stm32-dac";
-				#io-channels-cells = <1>;
+				#io-channel-cells = <1>;
 				reg = <2>;
 				status = "disabled";
 			};
@@ -1124,6 +1126,11 @@
 			};
 		};
 
+		pwr_mcu: pwr_mcu@50001014 {
+			compatible = "syscon";
+			reg = <0x50001014 0x4>;
+		};
+
 		exti: interrupt-controller@5000d000 {
 			compatible = "st,stm32mp1-exti", "syscon";
 			interrupt-controller;
@@ -1423,6 +1430,11 @@
 			clock-names = "lcd";
 			resets = <&rcc LTDC_R>;
 			status = "disabled";
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 
 		iwdg2: watchdog@5a002000 {
@@ -1476,7 +1488,7 @@
 		};
 
 		i2c4: i2c@5c002000 {
-			compatible = "st,stm32f7-i2c";
+			compatible = "st,stm32mp15-i2c";
 			reg = <0x5c002000 0x400>;
 			interrupt-names = "event", "error";
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
@@ -1485,6 +1497,7 @@
 			resets = <&rcc I2C4_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x8>;
 			wakeup-source;
 			status = "disabled";
 		};
@@ -1512,7 +1525,7 @@
 		};
 
 		i2c6: i2c@5c009000 {
-			compatible = "st,stm32f7-i2c";
+			compatible = "st,stm32mp15-i2c";
 			reg = <0x5c009000 0x400>;
 			interrupt-names = "event", "error";
 			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
@@ -1521,6 +1534,7 @@
 			resets = <&rcc I2C6_R>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			st,syscfg-fmp = <&syscfg 0x4 0x20>;
 			wakeup-source;
 			status = "disabled";
 		};
@@ -1700,6 +1714,7 @@
 			resets = <&rcc MCU_R>;
 			st,syscfg-holdboot = <&rcc 0x10C 0x1>;
 			st,syscfg-tz = <&rcc 0x000 0x1>;
+			st,syscfg-pdds = <&pwr_mcu 0x0 0x1>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/stm32mp157.dtsi b/arch/arm/boot/dts/stm32mp157.dtsi
index 3f0a4a91cce6..54e73ccea446 100644
--- a/arch/arm/boot/dts/stm32mp157.dtsi
+++ b/arch/arm/boot/dts/stm32mp157.dtsi
@@ -15,7 +15,6 @@
 			clocks = <&rcc GPU>, <&rcc GPU_K>;
 			clock-names = "bus" ,"core";
 			resets = <&rcc GPU_R>;
-			status = "disabled";
 		};
 
 		dsi: dsi@5a000000 {
@@ -25,7 +24,14 @@
 			clock-names = "pclk", "ref", "px_clk";
 			resets = <&rcc DSI_R>;
 			reset-names = "apb";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/stm32mp157a-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
index 425175f7d83c..8a6eaca994d1 100644
--- a/arch/arm/boot/dts/stm32mp157a-avenger96.dts
+++ b/arch/arm/boot/dts/stm32mp157a-avenger96.dts
@@ -2,318 +2,10 @@
 /*
  * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
  * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
  */
 
 /dts-v1/;
 
-#include "stm32mp157.dtsi"
-#include "stm32mp15-pinctrl.dtsi"
-#include "stm32mp15xxac-pinctrl.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/mfd/st,stpmic1.h>
-
-/ {
-	model = "Arrow Electronics STM32MP157A Avenger96 board";
-	compatible = "arrow,stm32mp157a-avenger96", "st,stm32mp157";
-
-	aliases {
-		ethernet0 = &ethernet0;
-		mmc0 = &sdmmc1;
-		serial0 = &uart4;
-		serial1 = &uart7;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	memory@c0000000 {
-		device_type = "memory";
-		reg = <0xc0000000 0x40000000>;
-	};
-
-	led {
-		compatible = "gpio-leds";
-		led1 {
-			label = "green:user1";
-			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-			default-state = "off";
-		};
-
-		led2 {
-			label = "green:user2";
-			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc0";
-			default-state = "off";
-		};
-
-		led3 {
-			label = "green:user3";
-			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "mmc1";
-			default-state = "off";
-		};
-
-		led4 {
-			label = "green:user3";
-			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "none";
-			default-state = "off";
-			panic-indicator;
-		};
-
-		led5 {
-			label = "yellow:wifi";
-			gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "phy0tx";
-			default-state = "off";
-		};
-
-		led6 {
-			label = "blue:bt";
-			gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "bluetooth-power";
-			default-state = "off";
-		};
-	};
-};
-
-&ethernet0 {
-	status = "okay";
-	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
-	pinctrl-names = "default", "sleep";
-	phy-mode = "rgmii";
-	max-speed = <1000>;
-	phy-handle = <&phy0>;
-
-	mdio0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-		phy0: ethernet-phy@7 {
-			reg = <7>;
-		};
-	};
-};
-
-&i2c1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c1_pins_b>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c2_pins_b1 &i2c2_pins_b2>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-	/delete-property/dmas;
-	/delete-property/dma-names;
-
-	pmic: stpmic@33 {
-		compatible = "st,stpmic1";
-		reg = <0x33>;
-		interrupts-extended = <&exti 55 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		status = "okay";
-
-		regulators {
-			compatible = "st,stpmic1-regulators";
-
-			ldo1-supply = <&v3v3>;
-			ldo2-supply = <&v3v3>;
-			ldo3-supply = <&vdd_ddr>;
-			ldo5-supply = <&v3v3>;
-			ldo6-supply = <&v3v3>;
-			pwr_sw1-supply = <&bst_out>;
-			pwr_sw2-supply = <&bst_out>;
-
-			vddcore: buck1 {
-				regulator-name = "vddcore";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd_ddr: buck2 {
-				regulator-name = "vdd_ddr";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd: buck3 {
-				regulator-name = "vdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			v3v3: buck4 {
-				regulator-name = "v3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-				regulator-initial-mode = <0>;
-			};
-
-			vdda: ldo1 {
-				regulator-name = "vdda";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
-				interrupts = <IT_CURLIM_LDO1 0>;
-				interrupt-parent = <&pmic>;
-			};
-
-			v2v8: ldo2 {
-				regulator-name = "v2v8";
-				regulator-min-microvolt = <2800000>;
-				regulator-max-microvolt = <2800000>;
-				interrupts = <IT_CURLIM_LDO2 0>;
-				interrupt-parent = <&pmic>;
-			};
-
-			vtt_ddr: ldo3 {
-				regulator-name = "vtt_ddr";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <750000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			vdd_usb: ldo4 {
-				regulator-name = "vdd_usb";
-				interrupts = <IT_CURLIM_LDO4 0>;
-				interrupt-parent = <&pmic>;
-			};
-
-			vdd_sd: ldo5 {
-				regulator-name = "vdd_sd";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
-				interrupts = <IT_CURLIM_LDO5 0>;
-				interrupt-parent = <&pmic>;
-				regulator-boot-on;
-			};
-
-			v1v8: ldo6 {
-				regulator-name = "v1v8";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				interrupts = <IT_CURLIM_LDO6 0>;
-				interrupt-parent = <&pmic>;
-				regulator-enable-ramp-delay = <300000>;
-			};
-
-			vref_ddr: vref_ddr {
-				regulator-name = "vref_ddr";
-				regulator-always-on;
-			};
-
-			bst_out: boost {
-				regulator-name = "bst_out";
-				interrupts = <IT_OCP_BOOST 0>;
-				interrupt-parent = <&pmic>;
-			};
-
-			vbus_otg: pwr_sw1 {
-				regulator-name = "vbus_otg";
-				interrupts = <IT_OCP_OTG 0>;
-				interrupt-parent = <&pmic>;
-			};
-
-			vbus_sw: pwr_sw2 {
-				regulator-name = "vbus_sw";
-				interrupts = <IT_OCP_SWOUT 0>;
-				interrupt-parent = <&pmic>;
-				regulator-active-discharge = <1>;
-			};
-		};
-
-		onkey {
-			compatible = "st,stpmic1-onkey";
-			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
-			interrupt-names = "onkey-falling", "onkey-rising";
-			status = "okay";
-		};
-
-		watchdog {
-			compatible = "st,stpmic1-wdt";
-			status = "disabled";
-		};
-	};
-};
-
-&iwdg2 {
-	timeout-sec = <32>;
-	status = "okay";
-};
-
-&pwr_regulators {
-	vdd-supply = <&vdd>;
-	vdd_3v3_usbfs-supply = <&vdd_usb>;
-};
-
-&rng1 {
-	status = "okay";
-};
-
-&rtc {
-	status = "okay";
-};
-
-&sdmmc1 {
-	pinctrl-names = "default", "opendrain", "sleep";
-	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
-	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
-	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
-	disable-wp;
-	st,sig-dir;
-	st,neg-edge;
-	st,use-ckin;
-	bus-width = <4>;
-	vmmc-supply = <&vdd_sd>;
-	status = "okay";
-};
-
-&uart4 {
-	/* On Low speed expansion header */
-	label = "LS-UART1";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_b>;
-	status = "okay";
-};
-
-&uart7 {
-	/* On Low speed expansion header */
-	label = "LS-UART0";
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart7_pins_a>;
-	status = "okay";
-};
+/* This DT is here only for backward compatibility */
+#include "stm32mp157a-dhcor-avenger96.dts"
diff --git a/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
new file mode 100644
index 000000000000..2e3c9fbb4eb3
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-dhcor-avenger96.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ *
+ * DHCOR STM32MP1 variant:
+ * DHCR-STM32MP157A-C065-R102-V18-SPI-C-01LG
+ * DHCOR PCB number: 586-100 or newer
+ * Avenger96 PCB number: 588-200 or newer
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-dhcor-som.dtsi"
+#include "stm32mp15xx-dhcor-avenger96.dtsi"
+
+/ {
+	model = "Arrow Electronics STM32MP157A Avenger96 board";
+	compatible = "arrow,stm32mp157a-avenger96", "dh,stm32mp157a-dhcor-som",
+		     "st,stm32mp157";
+};
+
+&m_can1 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can1_pins_b>;
+	pinctrl-1 = <&m_can1_sleep_pins_b>;
+	status = "disabled";
+};
+
+&m_can2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&m_can2_pins_a>;
+	pinctrl-1 = <&m_can2_sleep_pins_a>;
+	status = "disabled";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-iot-box.dts b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
new file mode 100644
index 000000000000..70f394b4d3c0
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-iot-box.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+#include "stm32mp157a-stinger96.dtsi"
+
+/ {
+	model = "Shiratech STM32MP157A IoT Box";
+	compatible = "shiratech,stm32mp157a-iot-box", "st,stm32mp157";
+
+	wlan_pwr: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpiog 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&i2c2 {
+	ccs811@5b {
+		compatible = "ams,ccs811";
+		reg = <0x5b>;
+		wakeup-gpios = <&gpioa 12 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>;
+	};
+};
+
+/* WiFi */
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a>;
+	broken-cd;
+	non-removable;
+	st,neg-edge;
+	bus-width = <1>;
+	vmmc-supply = <&wlan_pwr>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+/* Bluetooth */
+&uart4 {
+	/* Note: HW flow control is broken, hence using custom CTS/RTS gpios */
+	/delete-property/st,hw-flow-ctrl;
+	cts-gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
+	rts-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	bluetooth {
+		shutdown-gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <115200>;
+	};
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dts b/arch/arm/boot/dts/stm32mp157a-stinger96.dts
new file mode 100644
index 000000000000..249a53877512
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+#include "stm32mp157a-stinger96.dtsi"
+
+/ {
+	model = "Shiratech STM32MP157A Stinger96 board";
+	compatible = "shiratech,stm32mp157a-stinger96", "st,stm32mp157";
+};
diff --git a/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
new file mode 100644
index 000000000000..58275bcf9e26
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157a-stinger96.dtsi
@@ -0,0 +1,342 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Manivannan Sadhasivam
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	aliases {
+		mmc0 = &sdmmc1;
+		serial0 = &uart4;
+		serial1 = &uart7;
+		serial2 = &usart2;
+		spi0 = &spi4;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x10000000>;
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "green:user1";
+			gpios = <&gpioa 13 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green:user2";
+			gpios = <&gpioh 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "green:user3";
+			gpios = <&gpioh 2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "green:user4";
+			gpios = <&gpiof 12 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpioa 8 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+};
+
+/* Only headless mode is supported */
+&gpu {
+	status = "disabled";
+};
+
+/* LS-I2C0 */
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	i2c-scl-rising-time-ns = <1000>;
+	i2c-scl-falling-time-ns = <300>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v2v9: ldo2 {
+				regulator-name = "v2v9";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+	broken-cd;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	status = "okay";
+};
+
+/* LS-SPI0 */
+&spi4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi4_pins_a>;
+	cs-gpios = <&gpioe 11 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+/* BG96 */
+&usart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usart2_pins_b>;
+	pinctrl-1 = <&usart2_sleep_pins_b>;
+	st,hw-flow-ctrl;
+	status = "okay";
+};
+
+/* LS-UART0 */
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_c>;
+	st,hw-flow-ctrl;
+	status = "okay";
+};
+
+/* Debug console */
+&uart7 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_b>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	vbus-supply = <&vbus_otg>;
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
index af99e132e1b1..197aa98d49e2 100644
--- a/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dhcom-pdk2.dts
@@ -1,160 +1,23 @@
 // SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
 /*
- * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
+ *
+ * DHCOM STM32MP1 variant:
+ * DHCM-STM32MP157C-C065-R102-F0819-SPI-E2-CAN2-SDR104-RTC-WBT-T-DSI-I-01D2
+ * DHCOR PCB number: 587-200 or newer
+ * PDK2 PCB number: 516-400 or newer
  */
+/dts-v1/;
 
-#include "stm32mp157c-dhcom-som.dtsi"
-#include <dt-bindings/pwm/pwm.h>
+#include "stm32mp157.dtsi"
+#include "stm32mp15xc.dtsi"
+#include "stm32mp15xx-dhcom-som.dtsi"
+#include "stm32mp15xx-dhcom-pdk2.dtsi"
 
 / {
-	model = "STMicroelectronics STM32MP157C DHCOM Premium Developer Kit (2)";
-	compatible = "dh,stm32mp157c-dhcom-pdk2", "st,stm32mp157";
-
-	aliases {
-		serial0 = &uart4;
-		serial1 = &usart3;
-		serial2 = &uart8;
-		ethernet0 = &ethernet0;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	clk_ext_audio_codec: clock-codec {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-	};
-
-	display_bl: display-bl {
-		compatible = "pwm-backlight";
-		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
-		default-brightness-level = <8>;
-		enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
-		status = "okay";
-	};
-
-	ethernet_vio: vioregulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vio";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	panel {
-		compatible = "edt,etm0700g0edh6";
-		backlight = <&display_bl>;
-
-		port {
-			lcd_panel_in: endpoint {
-				remote-endpoint = <&lcd_display_out>;
-			};
-		};
-	};
-
-	sound {
-		compatible = "audio-graph-card";
-		routing =
-			"MIC_IN", "Capture",
-			"Capture", "Mic Bias",
-			"Playback", "HP_OUT";
-		dais = <&sai2a_port &sai2b_port>;
-		status = "okay";
-	};
-};
-
-&cec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&cec_pins_a>;
-	status = "okay";
-};
-
-&ethernet0 {
-	status = "okay";
-	pinctrl-0 = <&ethernet0_rmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rmii_pins_sleep_a>;
-	pinctrl-names = "default", "sleep";
-	phy-mode = "rmii";
-	max-speed = <100>;
-	phy-handle = <&phy0>;
-	st,eth-ref-clk-sel;
-	phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
-
-	mdio0 {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		compatible = "snps,dwmac-mdio";
-
-		phy0: ethernet-phy@1 {
-			reg = <1>;
-		};
-	};
-};
-
-&i2c5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_pins_a>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-	/* spare dmas for other usage */
-	/delete-property/dmas;
-	/delete-property/dma-names;
-
-	sgtl5000: codec@a {
-		compatible = "fsl,sgtl5000";
-		reg = <0x0a>;
-		#sound-dai-cells = <0>;
-		clocks = <&clk_ext_audio_codec>;
-		VDDA-supply = <&v3v3>;
-		VDDIO-supply = <&vdd>;
-
-		sgtl5000_port: port {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			sgtl5000_tx_endpoint: endpoint@0 {
-				reg = <0>;
-				remote-endpoint = <&sai2a_endpoint>;
-				frame-master;
-				bitclock-master;
-			};
-
-			sgtl5000_rx_endpoint: endpoint@1 {
-				reg = <1>;
-				remote-endpoint = <&sai2b_endpoint>;
-				frame-master;
-				bitclock-master;
-			};
-		};
-
-	};
-
-	polytouch@38 {
-		compatible = "edt,edt-ft5x06";
-		reg = <0x38>;
-		interrupt-parent = <&gpiog>;
-		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
-		linux,wakeup;
-	};
-};
-
-&ltdc {
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&ltdc_pins_b>;
-	pinctrl-1 = <&ltdc_pins_sleep_b>;
-	status = "okay";
-
-	port {
-		lcd_display_out: endpoint {
-			remote-endpoint = <&lcd_panel_in>;
-		};
-	};
+	model = "DH Electronics STM32MP157C DHCOM Premium Developer Kit (2)";
+	compatible = "dh,stm32mp157c-dhcom-pdk2", "dh,stm32mp157c-dhcom-som",
+		     "st,stm32mp157";
 };
 
 &m_can1 {
@@ -163,103 +26,3 @@
 	pinctrl-1 = <&m_can1_sleep_pins_a>;
 	status = "okay";
 };
-
-&sai2 {
-	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
-	clock-names = "pclk", "x8k", "x11k";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
-	pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
-	status = "okay";
-
-	sai2a: audio-controller@4400b004 {
-		#clock-cells = <0>;
-		dma-names = "tx";
-		clocks = <&rcc SAI2_K>;
-		clock-names = "sai_ck";
-		status = "okay";
-
-		sai2a_port: port {
-			sai2a_endpoint: endpoint {
-				remote-endpoint = <&sgtl5000_tx_endpoint>;
-				format = "i2s";
-				mclk-fs = <512>;
-				dai-tdm-slot-num = <2>;
-				dai-tdm-slot-width = <16>;
-			};
-		};
-	};
-
-	sai2b: audio-controller@4400b024 {
-		dma-names = "rx";
-		st,sync = <&sai2a 2>;
-		clocks = <&rcc SAI2_K>, <&sai2a>;
-		clock-names = "sai_ck", "MCLK";
-		status = "okay";
-
-		sai2b_port: port {
-			sai2b_endpoint: endpoint {
-				remote-endpoint = <&sgtl5000_rx_endpoint>;
-				format = "i2s";
-				mclk-fs = <512>;
-				dai-tdm-slot-num = <2>;
-				dai-tdm-slot-width = <16>;
-			};
-		};
-	};
-};
-
-&timers2 {
-	/* spare dmas for other usage (un-delete to enable pwm capture) */
-	/delete-property/dmas;
-	/delete-property/dma-names;
-	status = "okay";
-	pwm2: pwm {
-		pinctrl-0 = <&pwm2_pins_a>;
-		pinctrl-names = "default";
-		status = "okay";
-	};
-	timer@1 {
-		status = "okay";
-	};
-};
-
-&usart3 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&usart3_pins_a>;
-	status = "okay";
-};
-
-&uart8 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart8_pins_a>;
-	status = "okay";
-};
-
-&usbh_ehci {
-	phys = <&usbphyc_port0>;
-	status = "okay";
-};
-
-&usbotg_hs {
-	dr_mode = "peripheral";
-	phys = <&usbphyc_port1 0>;
-	phy-names = "usb2-phy";
-	status = "okay";
-};
-
-&usbphyc {
-	status = "okay";
-};
-
-&usbphyc_port0 {
-	phy-supply = <&vdd_usb>;
-	vdda1v1-supply = <&reg11>;
-	vdda1v8-supply = <&reg18>;
-};
-
-&usbphyc_port1 {
-	phy-supply = <&vdd_usb>;
-	vdda1v1-supply = <&reg11>;
-	vdda1v8-supply = <&reg18>;
-};
diff --git a/arch/arm/boot/dts/stm32mp157c-dk2.dts b/arch/arm/boot/dts/stm32mp157c-dk2.dts
index 7985b80967ca..9a8a26710ac1 100644
--- a/arch/arm/boot/dts/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/stm32mp157c-dk2.dts
@@ -27,15 +27,10 @@
 };
 
 &dsi {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	status = "okay";
 	phy-dsi-supply = <&reg18>;
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			dsi_in: endpoint {
@@ -83,9 +78,6 @@
 	status = "okay";
 
 	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		ltdc_ep1_out: endpoint@1 {
 			reg = <1>;
 			remote-endpoint = <&dsi_in>;
diff --git a/arch/arm/boot/dts/stm32mp157c-ed1.dts b/arch/arm/boot/dts/stm32mp157c-ed1.dts
index 9d2592db630c..32ccd50b4144 100644
--- a/arch/arm/boot/dts/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ed1.dts
@@ -126,13 +126,12 @@
 
 &gpu {
 	contiguous-area = <&gpu_reserved>;
-	status = "okay";
 };
 
 &i2c4 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c4_pins_a>;
-	pinctrl-1 = <&i2c4_pins_sleep_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	clock-frequency = <400000>;
@@ -320,6 +319,10 @@
 	bus-width = <4>;
 	vmmc-supply = <&vdd_sd>;
 	vqmmc-supply = <&sd_switch>;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-ddr50;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 8a4c7ff31a92..b19056557ef0 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -98,15 +98,10 @@
 };
 
 &dsi {
-	#address-cells = <1>;
-	#size-cells = <0>;
 	phy-dsi-supply = <&reg18>;
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		port@0 {
 			reg = <0>;
 			dsi_in: endpoint {
@@ -141,7 +136,7 @@
 &ethernet0 {
 	status = "okay";
 	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
 	pinctrl-names = "default", "sleep";
 	phy-mode = "rgmii-id";
 	max-speed = <1000>;
@@ -176,7 +171,7 @@
 &i2c2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c2_pins_a>;
-	pinctrl-1 = <&i2c2_pins_sleep_a>;
+	pinctrl-1 = <&i2c2_sleep_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	status = "okay";
@@ -230,7 +225,7 @@
 &i2c5 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c5_pins_a>;
-	pinctrl-1 = <&i2c5_pins_sleep_a>;
+	pinctrl-1 = <&i2c5_sleep_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	status = "okay";
@@ -240,9 +235,6 @@
 	status = "okay";
 
 	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		ltdc_ep0_out: endpoint@0 {
 			reg = <0>;
 			remote-endpoint = <&dsi_in>;
diff --git a/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
new file mode 100644
index 000000000000..5700e6b700d3
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp157c-lxa-mc1.dts
@@ -0,0 +1,252 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
+ */
+
+/dts-v1/;
+
+#include "stm32mp157.dtsi"
+#include "stm32mp15xx-osd32.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	model = "Linux Automation MC-1 board";
+	compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc0 = &sdmmc1;
+		mmc1 = &sdmmc2;
+		serial0 = &uart4;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&backlight_pwm 1 100000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 31 63 95 127 159 191 223 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_5v2>; /* 3V3_BACKLIGHT */
+	};
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	led-act {
+		compatible = "gpio-leds";
+
+		led-green {
+			label = "mc1:green:act";
+			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	led-rgb {
+		compatible = "pwm-leds";
+
+		led-red {
+			label = "mc1:red:rgb";
+			pwms = <&leds_pwm 1 1000000 0>;
+			max-brightness = <255>;
+			active-low;
+		};
+
+		led-green {
+			label = "mc1:green:rgb";
+			pwms = <&leds_pwm 2 1000000 0>;
+			max-brightness = <255>;
+			active-low;
+		};
+
+		led-blue {
+			label = "mc1:blue:rgb";
+			pwms = <&leds_pwm 3 1000000 0>;
+			max-brightness = <255>;
+			active-low;
+		};
+	};
+
+	panel: panel {
+		compatible = "edt,etm0700g0edh6", "simple-panel";
+		backlight = <&backlight>;
+		enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&reg_3v3>;
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+	};
+
+	reg_3v3: regulator_3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&v3v3>;
+	};
+
+	/* supplied by either debug board or PoE */
+	reg_5v2: regulator_5v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V2";
+		regulator-min-microvolt = <5200000>;
+		regulator-max-microvolt = <5200000>;
+		regulator-always-on;
+	};
+};
+
+&ethernet0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ethernet0_rgmii_pins_b>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_b>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy>;
+	status = "okay";
+
+	mdio0 {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy: ethernet-phy@3 { /* KSZ9031RN */
+			reg = <3>;
+			reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
+			interrupt-parent = <&gpioa>;
+			interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */
+			rxc-skew-ps = <1860>;
+			txc-skew-ps = <1860>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+			micrel,force-master;
+		};
+	};
+};
+
+&gpioz {
+	gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "", "",
+			  "HWID4", "HWID5";
+};
+
+&i2c5 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c5_pins_b>;
+	pinctrl-1 = <&i2c5_sleep_pins_b>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	touchscreen@38 {
+		compatible = "edt,edt-ft5x06";
+		interrupt-parent = <&gpiod>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>; /* TOUCH_INT# */
+		vcc-supply = <&reg_3v3>;
+		reg = <0x38>;
+		reset-gpios = <&gpiof 8 GPIO_ACTIVE_LOW>; /* TOUCH_RESET# */
+		touchscreen-size-x = <1792>;
+		touchscreen-size-y = <1024>;
+		wakeup-source;
+	};
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_c>;
+	pinctrl-1 = <&ltdc_sleep_pins_c>;
+	status = "okay";
+
+	port {
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&panel_input>;
+		};
+	};
+};
+
+&pmic {
+	regulators {
+		buck4-supply = <&reg_5v2>;	/* VIN */
+		ldo2-supply = <&reg_5v2>;	/* PMIC_LDO25IN */
+		ldo5-supply = <&reg_5v2>;	/* PMIC_LDO25IN */
+		boost-supply = <&reg_5v2>;	/* PMIC_BSTIN */
+		pwr_sw2-supply = <&bst_out>;    /* PMIC_SWIN */
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>;
+	bus-width = <4>;
+	cd-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	no-1-8-v;
+	st,neg-edge;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&sdmmc1_b4_pins_a {
+	/*
+	 * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to
+	 * work, thus enable internal pull-ups.
+	 */
+	pins1 {
+		/delete-property/ bias-disable;
+		bias-pull-up;
+	};
+	pins2 {
+		/delete-property/ bias-disable;
+		bias-pull-up;
+	};
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>;
+	bus-width = <8>;
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&timers3 {
+	status = "okay";
+
+	backlight_pwm: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm3_pins_b>;
+		pinctrl-1 = <&pwm3_sleep_pins_b>;
+		status = "okay";
+	};
+};
+
+&timers5 {
+	status = "okay";
+
+	leds_pwm: pwm {
+		pinctrl-names = "default", "sleep";
+		pinctrl-0 = <&pwm5_pins_b>;
+		pinctrl-1 = <&pwm5_sleep_pins_b>;
+		status = "okay";
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_a>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
new file mode 100644
index 000000000000..7c4bd615b311
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-pdk2.dtsi
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
+/*
+ * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
+ */
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pwm/pwm.h>
+
+/ {
+	aliases {
+		serial0 = &uart4;
+		serial1 = &usart3;
+		serial2 = &uart8;
+		ethernet0 = &ethernet0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk_ext_audio_codec: clock-codec {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	display_bl: display-bl {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 16 22 30 40 55 75 102 138 188 255>;
+		default-brightness-level = <8>;
+		enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+	};
+
+	ethernet_vio: vioregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vio";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpiog 3 GPIO_ACTIVE_LOW>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	gpio-keys-polled {
+		compatible = "gpio-keys-polled";
+		#size-cells = <0>;
+		poll-interval = <20>;
+
+		/*
+		 * The EXTi IRQ line 3 is shared with touchscreen and ethernet,
+		 * so mark this as polled GPIO key.
+		 */
+		button-0 {
+			label = "TA1-GPIO-A";
+			linux,code = <KEY_A>;
+			gpios = <&gpiof 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		#size-cells = <0>;
+
+		button-1 {
+			label = "TA2-GPIO-B";
+			linux,code = <KEY_B>;
+			gpios = <&gpiod 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-2 {
+			label = "TA3-GPIO-C";
+			linux,code = <KEY_C>;
+			gpios = <&gpioi 11 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		button-3 {
+			label = "TA4-GPIO-D";
+			linux,code = <KEY_D>;
+			gpios = <&gpiod 12 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "green:led5";
+			gpios = <&gpiog 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-1 {
+			label = "green:led6";
+			gpios = <&gpiod 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-2 {
+			label = "green:led7";
+			gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led-3 {
+			label = "green:led8";
+			gpios = <&gpioi 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0edh6";
+		backlight = <&display_bl>;
+
+		port {
+			lcd_panel_in: endpoint {
+				remote-endpoint = <&lcd_display_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		routing =
+			"MIC_IN", "Capture",
+			"Capture", "Mic Bias",
+			"Playback", "HP_OUT";
+		dais = <&sai2a_port &sai2b_port>;
+		status = "okay";
+	};
+};
+
+&cec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&cec_pins_a>;
+	status = "okay";
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rmii_pins_a>;
+	pinctrl-1 = <&ethernet0_rmii_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rmii";
+	max-speed = <100>;
+	phy-handle = <&phy0>;
+	st,eth-ref-clk-sel;
+	phy-reset-gpios = <&gpioh 15 GPIO_ACTIVE_LOW>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@1 {
+			reg = <1>;
+		};
+	};
+};
+
+&i2c2 {	/* Header X22 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+};
+
+&i2c5 {	/* Header X21 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/* spare dmas for other usage */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		#sound-dai-cells = <0>;
+		clocks = <&clk_ext_audio_codec>;
+		VDDA-supply = <&v3v3>;
+		VDDIO-supply = <&vdd>;
+
+		sgtl5000_port: port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sgtl5000_tx_endpoint: endpoint@0 {
+				reg = <0>;
+				remote-endpoint = <&sai2a_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+
+			sgtl5000_rx_endpoint: endpoint@1 {
+				reg = <1>;
+				remote-endpoint = <&sai2b_endpoint>;
+				frame-master;
+				bitclock-master;
+			};
+		};
+
+	};
+
+	polytouch@38 {
+		compatible = "edt,edt-ft5x06";
+		reg = <0x38>;
+		interrupt-parent = <&gpiog>;
+		interrupts = <2 IRQ_TYPE_EDGE_FALLING>; /* GPIO E */
+		linux,wakeup;
+	};
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_b>;
+	pinctrl-1 = <&ltdc_sleep_pins_b>;
+	status = "okay";
+
+	port {
+		lcd_display_out: endpoint {
+			remote-endpoint = <&lcd_panel_in>;
+		};
+	};
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	clock-names = "pclk", "x8k", "x11k";
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_b &sai2b_pins_b>;
+	pinctrl-1 = <&sai2a_sleep_pins_b &sai2b_sleep_pins_b>;
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&sgtl5000_tx_endpoint>;
+				format = "i2s";
+				mclk-fs = <512>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <16>;
+			};
+		};
+	};
+
+	sai2b: audio-controller@4400b024 {
+		dma-names = "rx";
+		st,sync = <&sai2a 2>;
+		clocks = <&rcc SAI2_K>, <&sai2a>;
+		clock-names = "sai_ck", "MCLK";
+		status = "okay";
+
+		sai2b_port: port {
+			sai2b_endpoint: endpoint {
+				remote-endpoint = <&sgtl5000_rx_endpoint>;
+				format = "i2s";
+				mclk-fs = <512>;
+				dai-tdm-slot-num = <2>;
+				dai-tdm-slot-width = <16>;
+			};
+		};
+	};
+};
+
+&timers2 {
+	/* spare dmas for other usage (un-delete to enable pwm capture) */
+	/delete-property/dmas;
+	/delete-property/dma-names;
+	status = "okay";
+	pwm2: pwm {
+		pinctrl-0 = <&pwm2_pins_a>;
+		pinctrl-names = "default";
+		status = "okay";
+	};
+	timer@1 {
+		status = "okay";
+	};
+};
+
+&usart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usart3_pins_a>;
+	status = "okay";
+};
+
+&uart8 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart8_pins_a>;
+	status = "okay";
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	status = "okay";
+};
+
+&usbotg_hs {
+	dr_mode = "peripheral";
+	phys = <&usbphyc_port1 0>;
+	phy-names = "usb2-phy";
+	status = "okay";
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
diff --git a/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
index f81dc3134135..ba905196fb54 100644
--- a/arch/arm/boot/dts/stm32mp157c-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcom-som.dtsi
@@ -1,11 +1,8 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
 /*
- * Copyright (C) 2019 Marek Vasut <marex@denx.de>
+ * Copyright (C) 2019-2020 Marek Vasut <marex@denx.de>
  */
-/dts-v1/;
 
-#include "stm32mp157.dtsi"
-#include "stm32mp15xc.dtsi"
 #include "stm32mp15-pinctrl.dtsi"
 #include "stm32mp15xxaa-pinctrl.dtsi"
 #include <dt-bindings/gpio/gpio.h>
@@ -97,10 +94,6 @@
 	status = "okay";
 };
 
-&gpu {
-	status = "okay";
-};
-
 &i2c4 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c4_pins_a>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
new file mode 100644
index 000000000000..930202742a3f
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-avenger96.dtsi
@@ -0,0 +1,401 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+/* Avenger96 uses DHCOR SoM configured for 1V8 IO operation */
+#include "stm32mp15xx-dhcor-io1v8.dtsi"
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc0 = &sdmmc1;
+		serial0 = &uart4;
+		serial1 = &uart7;
+		serial2 = &usart2;
+		spi0 = &qspi;
+	};
+
+	/* XTal Q1 */
+	cec_clock: clk-cec-fixed {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con: endpoint {
+				remote-endpoint = <&adv7513_out>;
+			};
+		};
+	};
+
+	led {
+		compatible = "gpio-leds";
+		led1 {
+			label = "green:user0";
+			gpios = <&gpioz 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green:user1";
+			gpios = <&gpiof 3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+			default-state = "off";
+		};
+
+		led3 {
+			label = "green:user2";
+			gpios = <&gpiog 0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc1";
+			default-state = "off";
+		};
+
+		led4 {
+			label = "green:user3";
+			gpios = <&gpiog 1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			panic-indicator;
+		};
+	};
+
+	sd_switch: regulator-sd_switch {
+		compatible = "regulator-gpio";
+		regulator-name = "sd_switch";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2900000>;
+		regulator-type = "voltage";
+		regulator-always-on;
+
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1>,
+			 <2900000 0x0>;
+	};
+
+	sound {
+		compatible = "audio-graph-card";
+		label = "STM32MP1-AV96-HDMI";
+		dais = <&sai2a_port>;
+		status = "okay";
+	};
+
+	wlan_pwr: regulator-wlan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "wl-reg";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpioz 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&adc12_ain_pins_b>;
+	vdd-supply = <&vdd>;
+	vdda-supply = <&vdda>;
+	vref-supply = <&vdda>;
+	status = "okay";
+
+	adc1: adc@0 {
+		st,adc-channels = <0 1 6>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+
+	adc2: adc@100 {
+		st,adc-channels = <0 1 2>;
+		st,min-sample-time-nsecs = <5000>;
+		status = "okay";
+	};
+};
+
+&ethernet0 {
+	status = "okay";
+	pinctrl-0 = <&ethernet0_rgmii_pins_c>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_c>;
+	pinctrl-names = "default", "sleep";
+	phy-mode = "rgmii";
+	max-speed = <1000>;
+	phy-handle = <&phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		reset-gpios = <&gpioz 2 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <1000>;
+
+		phy0: ethernet-phy@7 {
+			reg = <7>;
+
+			rxc-skew-ps = <1500>;
+			rxdv-skew-ps = <540>;
+			rxd0-skew-ps = <420>;
+			rxd1-skew-ps = <420>;
+			rxd2-skew-ps = <420>;
+			rxd3-skew-ps = <420>;
+
+			txc-skew-ps = <1440>;
+			txen-skew-ps = <540>;
+			txd0-skew-ps = <420>;
+			txd1-skew-ps = <420>;
+			txd2-skew-ps = <420>;
+			txd3-skew-ps = <420>;
+		};
+	};
+};
+
+&i2c1 {	/* X6 I2C1 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins_b>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c2 {	/* X6 I2C2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins_c>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&i2c4 {
+	hdmi-transmitter@3d {
+		compatible = "adi,adv7513";
+		reg = <0x3d>, <0x2d>, <0x4d>, <0x5d>;
+		reg-names = "main", "cec", "edid", "packet";
+		clocks = <&cec_clock>;
+		clock-names = "cec";
+
+		avdd-supply = <&v3v3>;
+		dvdd-supply = <&v3v3>;
+		pvdd-supply = <&v3v3>;
+		dvdd-3v-supply = <&v3v3>;
+		bgvdd-supply = <&v3v3>;
+
+		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&gpiog>;
+
+		status = "okay";
+
+		adi,input-depth = <8>;
+		adi,input-colorspace = "rgb";
+		adi,input-clock = "1x";
+		adi,input-style = <1>;
+		adi,input-justification = "evenly";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				adv7513_in: endpoint {
+					remote-endpoint = <&ltdc_ep0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				adv7513_out: endpoint {
+					remote-endpoint = <&hdmi_con>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+				adv7513_i2s0: endpoint {
+					remote-endpoint = <&sai2a_endpoint>;
+				};
+			};
+		};
+	};
+};
+
+&ltdc {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&ltdc_pins_d>;
+	pinctrl-1 = <&ltdc_sleep_pins_d>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ltdc_ep0_out: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&adv7513_in>;
+		};
+	};
+};
+
+&sai2 {
+	clocks = <&rcc SAI2>, <&rcc PLL3_Q>, <&rcc PLL3_R>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&sai2a_pins_c>;
+	pinctrl-1 = <&sai2a_sleep_pins_c>;
+	clock-names = "pclk", "x8k", "x11k";
+	status = "okay";
+
+	sai2a: audio-controller@4400b004 {
+		#clock-cells = <0>;
+		dma-names = "tx";
+		clocks = <&rcc SAI2_K>;
+		clock-names = "sai_ck";
+		status = "okay";
+
+		sai2a_port: port {
+			sai2a_endpoint: endpoint {
+				remote-endpoint = <&adv7513_i2s0>;
+				format = "i2s";
+				mclk-fs = <256>;
+			};
+		};
+	};
+};
+
+&sdmmc1 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_dir_pins_b>;
+	pinctrl-2 = <&sdmmc1_b4_sleep_pins_a &sdmmc1_dir_sleep_pins_b>;
+	cd-gpios = <&gpioi 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	disable-wp;
+	st,sig-dir;
+	st,neg-edge;
+	st,use-ckin;
+	bus-width = <4>;
+	vmmc-supply = <&vdd_sd>;
+	vqmmc-supply = <&sd_switch>;
+	status = "okay";
+};
+
+&sdmmc2 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_b>;
+	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_b>;
+	pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_b>;
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	st,neg-edge;
+	vmmc-supply = <&v3v3>;
+	vqmmc-supply = <&vdd_io>;
+	status = "okay";
+};
+
+&sdmmc3 {
+	pinctrl-names = "default", "opendrain", "sleep";
+	pinctrl-0 = <&sdmmc3_b4_pins_b>;
+	pinctrl-1 = <&sdmmc3_b4_od_pins_b>;
+	pinctrl-2 = <&sdmmc3_b4_sleep_pins_b>;
+	broken-cd;
+	non-removable;
+	st,neg-edge;
+	bus-width = <4>;
+	vmmc-supply = <&wlan_pwr>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2_pins_a>;
+	cs-gpios = <&gpioi 0 0>;
+	status = "disabled";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+};
+
+&uart4 {
+	/* On Low speed expansion header */
+	label = "LS-UART1";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_b>;
+	status = "okay";
+};
+
+&uart7 {
+	/* On Low speed expansion header */
+	label = "LS-UART0";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart7_pins_a>;
+	status = "okay";
+};
+
+/* Bluetooth */
+&usart2 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&usart2_pins_a>;
+	pinctrl-1 = <&usart2_sleep_pins_a>;
+	st,hw-flow-ctrl;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gpioz 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&usbh_ehci {
+	phys = <&usbphyc_port0>;
+	phy-names = "usb";
+	status = "okay";
+};
+
+&usbotg_hs {
+	pinctrl-0 = <&usbotg_hs_pins_a>;
+	pinctrl-names = "default";
+	phy-names = "usb2-phy";
+	phys = <&usbphyc_port1 0>;
+	status = "okay";
+	vbus-supply = <&vbus_otg>;
+};
+
+&usbphyc {
+	status = "okay";
+};
+
+&usbphyc_port0 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
+
+&usbphyc_port1 {
+	phy-supply = <&vdd_usb>;
+	vdda1v1-supply = <&reg11>;
+	vdda1v8-supply = <&reg18>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi
new file mode 100644
index 000000000000..75172314d7af
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-io1v8.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+/ {
+	/* Enpirion EP3A8LQI U2 on the DHCOR */
+	vdd_io: regulator-buck-io {
+		compatible = "regulator-fixed";
+		regulator-name = "buck-io";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+		vin-supply = <&vdd>;
+	};
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd_io>;
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
new file mode 100644
index 000000000000..04fbb324a541
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-dhcor-som.dtsi
@@ -0,0 +1,209 @@
+// SPDX-License-Identifier: (GPL-2.0 OR BSD-3-Clause)
+/*
+ * Copyright (C) Linaro Ltd 2019 - All Rights Reserved
+ * Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+ * Copyright (C) 2020 Marek Vasut <marex@denx.de>
+ */
+
+#include "stm32mp15-pinctrl.dtsi"
+#include "stm32mp15xxac-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	aliases {
+		spi0 = &qspi;
+	};
+
+	memory@c0000000 {
+		device_type = "memory";
+		reg = <0xc0000000 0x40000000>;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4_pins_a>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+	/delete-property/dmas;
+	/delete-property/dma-names;
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		status = "okay";
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo2-supply = <&v3v3>;
+			ldo3-supply = <&vdd_ddr>;
+			ldo5-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+			pwr_sw2-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			vdda: ldo1 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO1 0>;
+			};
+
+			v2v8: ldo2 {
+				regulator-name = "v2v8";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				interrupts = <IT_CURLIM_LDO2 0>;
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdd_sd: ldo5 {
+				regulator-name = "vdd_sd";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v8: ldo6 {
+				regulator-name = "v1v8";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				interrupts = <IT_CURLIM_LDO6 0>;
+				regulator-enable-ramp-delay = <300000>;
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge = <1>;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge = <1>;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+			status = "okay";
+		};
+
+		watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+
+	eeprom@53 {
+		compatible = "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+	};
+};
+
+&iwdg2 {
+	timeout-sec = <32>;
+	status = "okay";
+};
+
+&pwr_regulators {
+	vdd-supply = <&vdd>;
+	vdd_3v3_usbfs-supply = <&vdd_usb>;
+};
+
+&qspi {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&qspi_clk_pins_a &qspi_bk1_pins_a>;
+	pinctrl-1 = <&qspi_clk_sleep_pins_a &qspi_bk1_sleep_pins_a>;
+	reg = <0x58003000 0x1000>, <0x70000000 0x200000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	flash0: spi-flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-rx-bus-width = <4>;
+		spi-max-frequency = <108000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&rng1 {
+	status = "okay";
+};
+
+&rtc {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
index d946e0a02f5c..70db923a45f7 100644
--- a/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/stm32mp15xx-dkx.dtsi
@@ -112,14 +112,18 @@
 &cec {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&cec_pins_b>;
-	pinctrl-1 = <&cec_pins_sleep_b>;
+	pinctrl-1 = <&cec_sleep_pins_b>;
+	status = "okay";
+};
+
+&dts {
 	status = "okay";
 };
 
 &ethernet0 {
 	status = "okay";
 	pinctrl-0 = <&ethernet0_rgmii_pins_a>;
-	pinctrl-1 = <&ethernet0_rgmii_pins_sleep_a>;
+	pinctrl-1 = <&ethernet0_rgmii_sleep_pins_a>;
 	pinctrl-names = "default", "sleep";
 	phy-mode = "rgmii-id";
 	max-speed = <1000>;
@@ -137,13 +141,12 @@
 
 &gpu {
 	contiguous-area = <&gpu_reserved>;
-	status = "okay";
 };
 
 &i2c1 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c1_pins_a>;
-	pinctrl-1 = <&i2c1_pins_sleep_a>;
+	pinctrl-1 = <&i2c1_sleep_pins_a>;
 	i2c-scl-rising-time-ns = <100>;
 	i2c-scl-falling-time-ns = <7>;
 	status = "okay";
@@ -218,7 +221,7 @@
 &i2c4 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2c4_pins_a>;
-	pinctrl-1 = <&i2c4_pins_sleep_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
 	clock-frequency = <400000>;
@@ -367,7 +370,7 @@
 	clock-names = "pclk", "i2sclk", "x8k", "x11k";
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&i2s2_pins_a>;
-	pinctrl-1 = <&i2s2_pins_sleep_a>;
+	pinctrl-1 = <&i2s2_sleep_pins_a>;
 	status = "okay";
 
 	i2s2_port: port {
@@ -391,13 +394,10 @@
 &ltdc {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&ltdc_pins_a>;
-	pinctrl-1 = <&ltdc_pins_sleep_a>;
+	pinctrl-1 = <&ltdc_sleep_pins_a>;
 	status = "okay";
 
 	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
 		ltdc_ep0_out: endpoint@0 {
 			reg = <0>;
 			remote-endpoint = <&sii9022_in>;
diff --git a/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
new file mode 100644
index 000000000000..713485a95795
--- /dev/null
+++ b/arch/arm/boot/dts/stm32mp15xx-osd32.dtsi
@@ -0,0 +1,230 @@
+/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
+/*
+ * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
+ * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
+ */
+
+#include "stm32mp15-pinctrl.dtsi"
+
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+/ {
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		mcuram2: mcuram2@10000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10000000 0x40000>;
+			no-map;
+		};
+
+		vdev0vring0: vdev0vring0@10040000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10040000 0x1000>;
+			no-map;
+		};
+
+		vdev0vring1: vdev0vring1@10041000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10041000 0x1000>;
+			no-map;
+		};
+
+		vdev0buffer: vdev0buffer@10042000 {
+			compatible = "shared-dma-pool";
+			reg = <0x10042000 0x4000>;
+			no-map;
+		};
+
+		mcuram: mcuram@30000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x30000000 0x40000>;
+			no-map;
+		};
+
+		retram: retram@38000000 {
+			compatible = "shared-dma-pool";
+			reg = <0x38000000 0x10000>;
+			no-map;
+		};
+	};
+
+	reg_sip_eeprom: regulator_eeprom {
+		compatible = "regulator-fixed";
+		regulator-name = "sip_eeprom";
+		regulator-always-on;
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&i2c4_pins_a>;
+	pinctrl-1 = <&i2c4_sleep_pins_a>;
+	clock-frequency = <400000>;
+	i2c-scl-rising-time-ns = <185>;
+	i2c-scl-falling-time-ns = <20>;
+	status = "okay";
+
+	pmic: stpmic@33 {
+		compatible = "st,stpmic1";
+		reg = <0x33>;
+		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		regulators {
+			compatible = "st,stpmic1-regulators";
+
+			ldo1-supply = <&v3v3>;
+			ldo6-supply = <&v3v3>;
+			pwr_sw1-supply = <&bst_out>;
+
+			vddcore: buck1 {
+				regulator-name = "vddcore";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd_ddr: buck2 {
+				regulator-name = "vdd_ddr";
+				regulator-min-microvolt = <1350000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-always-on;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			vdd: buck3 {
+				regulator-name = "vdd";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				st,mask-reset;
+				regulator-initial-mode = <0>;
+				regulator-over-current-protection;
+			};
+
+			v3v3: buck4 {
+				regulator-name = "v3v3";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+				regulator-initial-mode = <0>;
+			};
+
+			v1v8_audio: ldo1 {
+				regulator-name = "v1v8_audio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO1 0>;
+
+			};
+
+			v3v3_hdmi: ldo2 {
+				regulator-name = "v3v3_hdmi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO2 0>;
+
+			};
+
+			vtt_ddr: ldo3 {
+				regulator-name = "vtt_ddr";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <750000>;
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			vdd_usb: ldo4 {
+				regulator-name = "vdd_usb";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				interrupts = <IT_CURLIM_LDO4 0>;
+			};
+
+			vdda: ldo5 {
+				regulator-name = "vdda";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <2900000>;
+				interrupts = <IT_CURLIM_LDO5 0>;
+				regulator-boot-on;
+			};
+
+			v1v2_hdmi: ldo6 {
+				regulator-name = "v1v2_hdmi";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-always-on;
+				interrupts = <IT_CURLIM_LDO6 0>;
+
+			};
+
+			vref_ddr: vref_ddr {
+				regulator-name = "vref_ddr";
+				regulator-always-on;
+				regulator-over-current-protection;
+			};
+
+			bst_out: boost {
+				regulator-name = "bst_out";
+				interrupts = <IT_OCP_BOOST 0>;
+			};
+
+			vbus_otg: pwr_sw1 {
+				regulator-name = "vbus_otg";
+				interrupts = <IT_OCP_OTG 0>;
+				regulator-active-discharge;
+			};
+
+			vbus_sw: pwr_sw2 {
+				regulator-name = "vbus_sw";
+				interrupts = <IT_OCP_SWOUT 0>;
+				regulator-active-discharge;
+			};
+		};
+
+		onkey {
+			compatible = "st,stpmic1-onkey";
+			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
+			interrupt-names = "onkey-falling", "onkey-rising";
+		};
+
+		pmic_watchdog: watchdog {
+			compatible = "st,stpmic1-wdt";
+			status = "disabled";
+		};
+	};
+
+	sip_eeprom: eeprom@50 {
+		compatible = "atmel,24c32";
+		vcc-supply = <&reg_sip_eeprom>;
+		reg = <0x50>;
+	};
+};
+
+&ipcc {
+	status = "okay";
+};
+
+&m4_rproc {
+	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
+			<&vdev0vring1>, <&vdev0buffer>;
+	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
+	mbox-names = "vq0", "vq1", "shutdown";
+	interrupt-parent = <&exti>;
+	interrupts = <68 1>;
+	status = "okay";
+};
+
+&rng1 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts
new file mode 100644
index 000000000000..033cab3443f8
--- /dev/null
+++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime-emmc.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2020 Olimex Ltd.
+ *   Author: Stefan Mavrodiev <stefan@olimex.com>
+ */
+
+#include "sun7i-a20-olinuxino-lime.dts"
+
+/ {
+	model = "Olimex A20-OLinuXino-LIME-eMMC";
+	compatible = "olimex,a20-olinuxino-lime-emmc", "allwinner,sun7i-a20";
+
+	mmc2_pwrseq: pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		reset-gpios = <&pio 2 16 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mmc2 {
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&mmc2_pwrseq>;
+	status = "okay";
+
+	emmc: emmc@0 {
+		reg = <0>;
+		compatible = "mmc-card";
+		broken-hpi;
+	};
+};
diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
index 655404d6d3a3..c010b27fdb6a 100644
--- a/arch/arm/boot/dts/sun8i-a83t.dtsi
+++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
@@ -610,6 +610,16 @@
 			clock-names = "bus", "mod";
 		};
 
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-a83t-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
 		usb_otg: usb@1c19000 {
 			compatible = "allwinner,sun8i-a83t-musb",
 				     "allwinner,sun8i-a33-musb";
diff --git a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
index d277d043031b..4c6704e4c57e 100644
--- a/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
+++ b/arch/arm/boot/dts/sun8i-h2-plus-bananapi-m2-zero.dts
@@ -31,7 +31,7 @@
 
 		pwr_led {
 			label = "bananapi-m2-zero:red:pwr";
-			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
+			gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
 			default-state = "on";
 		};
 	};
diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi
index e83aa6866e7e..4e89701df91f 100644
--- a/arch/arm/boot/dts/sun8i-h3.dtsi
+++ b/arch/arm/boot/dts/sun8i-h3.dtsi
@@ -112,6 +112,26 @@
 		};
 	};
 
+	gpu_opp_table: gpu-opp-table {
+		compatible = "operating-points-v2";
+
+		opp-120000000 {
+			opp-hz = /bits/ 64 <120000000>;
+		};
+
+		opp-312000000 {
+			opp-hz = /bits/ 64 <312000000>;
+		};
+
+		opp-432000000 {
+			opp-hz = /bits/ 64 <432000000>;
+		};
+
+		opp-576000000 {
+			opp-hz = /bits/ 64 <576000000>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,cortex-a7-pmu";
 		interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
@@ -205,9 +225,7 @@
 			clocks = <&ccu CLK_BUS_GPU>, <&ccu CLK_GPU>;
 			clock-names = "bus", "core";
 			resets = <&ccu RST_BUS_GPU>;
-
-			assigned-clocks = <&ccu CLK_GPU>;
-			assigned-clock-rates = <384000000>;
+			operating-points-v2 = <&gpu_opp_table>;
 		};
 
 		ths: thermal-sensor@1c25000 {
diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
index 01a5df9aa71b..22d533d18992 100644
--- a/arch/arm/boot/dts/sunxi-h3-h5.dtsi
+++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi
@@ -239,6 +239,16 @@
 			};
 		};
 
+		msgbox: mailbox@1c17000 {
+			compatible = "allwinner,sun8i-h3-msgbox",
+				     "allwinner,sun6i-a31-msgbox";
+			reg = <0x01c17000 0x1000>;
+			clocks = <&ccu CLK_BUS_MSGBOX>;
+			resets = <&ccu RST_BUS_MSGBOX>;
+			interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <1>;
+		};
+
 		usb_otg: usb@1c19000 {
 			compatible = "allwinner,sun8i-h3-musb";
 			reg = <0x01c19000 0x400>;
diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts
index d3e032e7d21a..08be733ee2cd 100644
--- a/arch/arm/boot/dts/tegra114-dalmore.dts
+++ b/arch/arm/boot/dts/tegra114-dalmore.dts
@@ -46,8 +46,7 @@
 			avdd-dsi-csi-supply = <&avdd_1v2_reg>;
 
 			panel@0 {
-				compatible = "panasonic,vvx10f004b00",
-					     "simple-panel";
+				compatible = "panasonic,vvx10f004b00";
 				reg = <0>;
 
 				power-supply = <&avdd_lcd_reg>;
diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts
index 8c2ee6e7d6f1..73361dbe2e43 100644
--- a/arch/arm/boot/dts/tegra124-venice2.dts
+++ b/arch/arm/boot/dts/tegra124-venice2.dts
@@ -1087,7 +1087,7 @@
 	};
 
 	panel: panel {
-		compatible = "lg,lp129qe", "simple-panel";
+		compatible = "lg,lp129qe";
 
 		backlight = <&backlight>;
 		ddc-i2c-bus = <&dpaux>;
diff --git a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
index 3c0f2681fcde..37ad508b61d9 100644
--- a/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-eval-v3.dts
@@ -223,7 +223,7 @@
 		 * edt,et057090dhu: EDT 5.7" LCD TFT
 		 * edt,et070080dh6: EDT 7.0" LCD TFT
 		 */
-		compatible = "edt,et057090dhu", "simple-panel";
+		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
 	};
diff --git a/arch/arm/boot/dts/tegra20-colibri-iris.dts b/arch/arm/boot/dts/tegra20-colibri-iris.dts
index d8004d68efa0..af4740847769 100644
--- a/arch/arm/boot/dts/tegra20-colibri-iris.dts
+++ b/arch/arm/boot/dts/tegra20-colibri-iris.dts
@@ -205,7 +205,7 @@
 		 * edt,et057090dhu: EDT 5.7" LCD TFT
 		 * edt,et070080dh6: EDT 7.0" LCD TFT
 		 */
-		compatible = "edt,et057090dhu", "simple-panel";
+		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
 	};
diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts
index 1d96d92b72a7..02cd67ea2503 100644
--- a/arch/arm/boot/dts/tegra20-harmony.dts
+++ b/arch/arm/boot/dts/tegra20-harmony.dts
@@ -665,7 +665,7 @@
 	};
 
 	panel: panel {
-		compatible = "auo,b101aw03", "simple-panel";
+		compatible = "auo,b101aw03";
 
 		power-supply = <&vdd_pnl_reg>;
 		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts
index cda5448c2ace..c73510cd501c 100644
--- a/arch/arm/boot/dts/tegra20-medcom-wide.dts
+++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts
@@ -57,7 +57,7 @@
 	};
 
 	panel: panel {
-		compatible = "innolux,n156bge-l21", "simple-panel";
+		compatible = "innolux,n156bge-l21";
 
 		power-supply =  <&vdd_1v8_reg>, <&vdd_3v3_reg>;
 		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts
index be0ab9b84b9a..cce3a3fb82ed 100644
--- a/arch/arm/boot/dts/tegra20-paz00.dts
+++ b/arch/arm/boot/dts/tegra20-paz00.dts
@@ -604,7 +604,7 @@
 	};
 
 	panel: panel {
-		compatible = "samsung,ltn101nt05", "simple-panel";
+		compatible = "samsung,ltn101nt05";
 
 		ddc-i2c-bus = <&lvds_ddc>;
 		power-supply = <&vdd_pnl_reg>;
diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts
index f91441683aad..376ecb6435f4 100644
--- a/arch/arm/boot/dts/tegra20-seaboard.dts
+++ b/arch/arm/boot/dts/tegra20-seaboard.dts
@@ -826,7 +826,7 @@
 	};
 
 	panel: panel {
-		compatible = "chunghwa,claa101wa01a", "simple-panel";
+		compatible = "chunghwa,claa101wa01a";
 
 		power-supply = <&vdd_pnl_reg>;
 		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts
index f44551e2d9d0..022649119821 100644
--- a/arch/arm/boot/dts/tegra20-ventana.dts
+++ b/arch/arm/boot/dts/tegra20-ventana.dts
@@ -611,7 +611,7 @@
 	};
 
 	panel: panel {
-		compatible = "chunghwa,claa101wa01a", "simple-panel";
+		compatible = "chunghwa,claa101wa01a";
 
 		power-supply = <&vdd_pnl_reg>;
 		enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts
index 749fc6d1ff70..b39c26806bf2 100644
--- a/arch/arm/boot/dts/tegra30-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts
@@ -195,7 +195,7 @@
 		 * edt,et057090dhu: EDT 5.7" LCD TFT
 		 * edt,et070080dh6: EDT 7.0" LCD TFT
 		 */
-		compatible = "edt,et057090dhu", "simple-panel";
+		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
 	};
diff --git a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
index 0be50e881684..e29dca92ba0a 100644
--- a/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
+++ b/arch/arm/boot/dts/tegra30-apalis-v1.1-eval.dts
@@ -196,7 +196,7 @@
 		 * edt,et057090dhu: EDT 5.7" LCD TFT
 		 * edt,et070080dh6: EDT 7.0" LCD TFT
 		 */
-		compatible = "edt,et057090dhu", "simple-panel";
+		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
 	};
diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts
index 45ef6002b225..6b6fd8a8058f 100644
--- a/arch/arm/boot/dts/tegra30-beaver.dts
+++ b/arch/arm/boot/dts/tegra30-beaver.dts
@@ -2,6 +2,8 @@
 /dts-v1/;
 
 #include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
 
 / {
 	model = "NVIDIA Tegra30 Beaver evaluation board";
@@ -1806,9 +1808,14 @@
 
 				vddctrl_reg: vddctrl {
 					regulator-name = "vdd_cpu,vdd_sys";
-					regulator-min-microvolt = <1000000>;
-					regulator-max-microvolt = <1000000>;
+					regulator-min-microvolt = <800000>;
+					regulator-max-microvolt = <1250000>;
+					regulator-coupled-with = <&core_vdd_reg>;
+					regulator-coupled-max-spread = <300000>;
+					regulator-max-step-microvolt = <100000>;
 					regulator-always-on;
+
+					nvidia,tegra-cpu-regulator;
 				};
 
 				vio_reg: vio {
@@ -1868,17 +1875,22 @@
 			};
 		};
 
-		tps62361@60 {
+		core_vdd_reg: tps62361@60 {
 			compatible = "ti,tps62361";
 			reg = <0x60>;
 
 			regulator-name = "tps62361-vout";
 			regulator-min-microvolt = <500000>;
 			regulator-max-microvolt = <1500000>;
+			regulator-coupled-with = <&vddctrl_reg>;
+			regulator-coupled-max-spread = <300000>;
+			regulator-max-step-microvolt = <100000>;
 			regulator-boot-on;
 			regulator-always-on;
 			ti,vsel0-state-high;
 			ti,vsel1-state-high;
+
+			nvidia,tegra-core-regulator;
 		};
 	};
 
@@ -2120,4 +2132,26 @@
 		assigned-clock-parents = <&tegra_car TEGRA30_CLK_PLL_A_OUT0>,
 					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index 4b4f49a49394..5ee5d141bd81 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -432,7 +432,7 @@
 	};
 
 	panel: panel {
-		compatible = "chunghwa,claa101wb01", "simple-panel";
+		compatible = "chunghwa,claa101wb01";
 		ddc-i2c-bus = <&panelddc>;
 
 		power-supply = <&vdd_pnl1_reg>;
diff --git a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
index 5965150ecdd2..8e106e784dce 100644
--- a/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
+++ b/arch/arm/boot/dts/tegra30-colibri-eval-v3.dts
@@ -159,7 +159,7 @@
 		 * edt,et057090dhu: EDT 5.7" LCD TFT
 		 * edt,et070080dh6: EDT 7.0" LCD TFT
 		 */
-		compatible = "edt,et057090dhu", "simple-panel";
+		compatible = "edt,et057090dhu";
 		backlight = <&backlight>;
 		power-supply = <&reg_3v3>;
 	};
diff --git a/arch/arm/boot/dts/uniphier-ld4.dtsi b/arch/arm/boot/dts/uniphier-ld4.dtsi
index 06e7400d2940..b52957ccda0d 100644
--- a/arch/arm/boot/dts/uniphier-ld4.dtsi
+++ b/arch/arm/boot/dts/uniphier-ld4.dtsi
@@ -67,6 +67,8 @@
 			compatible = "socionext,uniphier-scssi";
 			status = "disabled";
 			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			interrupts = <0 39 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
diff --git a/arch/arm/boot/dts/uniphier-ld6b-ref.dts b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
index 60994b6e8b99..079cadc11e6c 100644
--- a/arch/arm/boot/dts/uniphier-ld6b-ref.dts
+++ b/arch/arm/boot/dts/uniphier-ld6b-ref.dts
@@ -29,6 +29,7 @@
 		i2c4 = &i2c4;
 		i2c5 = &i2c5;
 		i2c6 = &i2c6;
+		ethernet0 = &eth;
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/uniphier-pro4-ace.dts b/arch/arm/boot/dts/uniphier-pro4-ace.dts
index 92cc48dd86d0..64246fad325c 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ace.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ace.dts
@@ -26,6 +26,7 @@
 		i2c3 = &i2c3;
 		i2c5 = &i2c5;
 		i2c6 = &i2c6;
+		ethernet0 = &eth;
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/uniphier-pro4-ref.dts b/arch/arm/boot/dts/uniphier-pro4-ref.dts
index 854f2eba3e72..181442c48532 100644
--- a/arch/arm/boot/dts/uniphier-pro4-ref.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-ref.dts
@@ -29,6 +29,7 @@
 		i2c3 = &i2c3;
 		i2c5 = &i2c5;
 		i2c6 = &i2c6;
+		ethernet0 = &eth;
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/uniphier-pro4-sanji.dts b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
index dda1a2f214a8..5396556dee58 100644
--- a/arch/arm/boot/dts/uniphier-pro4-sanji.dts
+++ b/arch/arm/boot/dts/uniphier-pro4-sanji.dts
@@ -25,6 +25,7 @@
 		i2c3 = &i2c3;
 		i2c5 = &i2c5;
 		i2c6 = &i2c6;
+		ethernet0 = &eth;
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/uniphier-pro4.dtsi b/arch/arm/boot/dts/uniphier-pro4.dtsi
index 1c866f0306fc..a53b73ee93e9 100644
--- a/arch/arm/boot/dts/uniphier-pro4.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro4.dtsi
@@ -75,6 +75,8 @@
 			compatible = "socionext,uniphier-scssi";
 			status = "disabled";
 			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			interrupts = <0 39 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
@@ -426,6 +428,14 @@
 			};
 		};
 
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <0 188 4>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
 		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-pro4-aidet";
 			reg = <0x5fc20000 0x200>;
diff --git a/arch/arm/boot/dts/uniphier-pro5.dtsi b/arch/arm/boot/dts/uniphier-pro5.dtsi
index 8f1ae0957f5f..feadb4a378eb 100644
--- a/arch/arm/boot/dts/uniphier-pro5.dtsi
+++ b/arch/arm/boot/dts/uniphier-pro5.dtsi
@@ -160,6 +160,8 @@
 			compatible = "socionext,uniphier-scssi";
 			status = "disabled";
 			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			interrupts = <0 39 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
@@ -171,6 +173,8 @@
 			compatible = "socionext,uniphier-scssi";
 			status = "disabled";
 			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
@@ -408,6 +412,14 @@
 			};
 		};
 
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <0 188 4>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
 		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-pro5-aidet";
 			reg = <0x5fc20000 0x200>;
diff --git a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
index e27fd4f2a569..8e9ac579aa9a 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-gentil.dts
@@ -26,6 +26,7 @@
 		i2c4 = &i2c4;
 		i2c5 = &i2c5;
 		i2c6 = &i2c6;
+		ethernet0 = &eth;
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
index 23fe42b7408b..8eacc7bdecb7 100644
--- a/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
+++ b/arch/arm/boot/dts/uniphier-pxs2-vodka.dts
@@ -24,6 +24,7 @@
 		i2c4 = &i2c4;
 		i2c5 = &i2c5;
 		i2c6 = &i2c6;
+		ethernet0 = &eth;
 	};
 
 	memory@80000000 {
diff --git a/arch/arm/boot/dts/uniphier-pxs2.dtsi b/arch/arm/boot/dts/uniphier-pxs2.dtsi
index 2f2a24994c69..b0b15c97306b 100644
--- a/arch/arm/boot/dts/uniphier-pxs2.dtsi
+++ b/arch/arm/boot/dts/uniphier-pxs2.dtsi
@@ -173,6 +173,8 @@
 			compatible = "socionext,uniphier-scssi";
 			status = "disabled";
 			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			interrupts = <0 39 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
@@ -184,6 +186,8 @@
 			compatible = "socionext,uniphier-scssi";
 			status = "disabled";
 			reg = <0x54006100 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			interrupts = <0 216 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi1>;
@@ -508,6 +512,14 @@
 			};
 		};
 
+		xdmac: dma-controller@5fc10000 {
+			compatible = "socionext,uniphier-xdmac";
+			reg = <0x5fc10000 0x5300>;
+			interrupts = <0 188 4>;
+			dma-channels = <16>;
+			#dma-cells = <2>;
+		};
+
 		aidet: interrupt-controller@5fc20000 {
 			compatible = "socionext,uniphier-pxs2-aidet";
 			reg = <0x5fc20000 0x200>;
diff --git a/arch/arm/boot/dts/uniphier-sld8.dtsi b/arch/arm/boot/dts/uniphier-sld8.dtsi
index 09992163e1f4..96a766deb8d1 100644
--- a/arch/arm/boot/dts/uniphier-sld8.dtsi
+++ b/arch/arm/boot/dts/uniphier-sld8.dtsi
@@ -67,6 +67,8 @@
 			compatible = "socionext,uniphier-scssi";
 			status = "disabled";
 			reg = <0x54006000 0x100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 			interrupts = <0 39 4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&pinctrl_spi0>;
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index 5c183483ec3b..e6308fb76183 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -19,8 +19,162 @@
  */
 
 / {
+	v2m_fixed_3v3: fixed-regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	v2m_clk24mhz: clk24mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "v2m:clk24mhz";
+	};
+
+	v2m_refclk1mhz: refclk1mhz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <1000000>;
+		clock-output-names = "v2m:refclk1mhz";
+	};
+
+	v2m_refclk32khz: refclk32khz {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "v2m:refclk32khz";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			label = "v2m:green:user1";
+			gpios = <&v2m_led_gpios 0 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-2 {
+			label = "v2m:green:user2";
+			gpios = <&v2m_led_gpios 1 0>;
+			linux,default-trigger = "disk-activity";
+		};
+
+		led-3 {
+			label = "v2m:green:user3";
+			gpios = <&v2m_led_gpios 2 0>;
+			linux,default-trigger = "cpu0";
+		};
+
+		led-4 {
+			label = "v2m:green:user4";
+			gpios = <&v2m_led_gpios 3 0>;
+			linux,default-trigger = "cpu1";
+		};
+
+		led-5 {
+			label = "v2m:green:user5";
+			gpios = <&v2m_led_gpios 4 0>;
+			linux,default-trigger = "cpu2";
+		};
+
+		led-6 {
+			label = "v2m:green:user6";
+			gpios = <&v2m_led_gpios 5 0>;
+			linux,default-trigger = "cpu3";
+		};
+
+		led-7 {
+			label = "v2m:green:user7";
+			gpios = <&v2m_led_gpios 6 0>;
+			linux,default-trigger = "cpu4";
+		};
+
+		led-8 {
+			label = "v2m:green:user8";
+			gpios = <&v2m_led_gpios 7 0>;
+			linux,default-trigger = "cpu5";
+		};
+	};
+
+	mcc {
+		compatible = "arm,vexpress,config-bus";
+		arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+		oscclk0 {
+			/* MCC static memory clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 0>;
+			freq-range = <25000000 60000000>;
+			#clock-cells = <0>;
+			clock-output-names = "v2m:oscclk0";
+		};
+
+		v2m_oscclk1: oscclk1 {
+			/* CLCD clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 1>;
+			freq-range = <23750000 65000000>;
+			#clock-cells = <0>;
+			clock-output-names = "v2m:oscclk1";
+		};
+
+		v2m_oscclk2: oscclk2 {
+			/* IO FPGA peripheral clock */
+			compatible = "arm,vexpress-osc";
+			arm,vexpress-sysreg,func = <1 2>;
+			freq-range = <24000000 24000000>;
+			#clock-cells = <0>;
+			clock-output-names = "v2m:oscclk2";
+		};
+
+		volt-vio {
+			/* Logic level voltage */
+			compatible = "arm,vexpress-volt";
+			arm,vexpress-sysreg,func = <2 0>;
+			regulator-name = "VIO";
+			regulator-always-on;
+			label = "VIO";
+		};
+
+		temp-mcc {
+			/* MCC internal operating temperature */
+			compatible = "arm,vexpress-temp";
+			arm,vexpress-sysreg,func = <4 0>;
+			label = "MCC";
+		};
+
+		reset {
+			compatible = "arm,vexpress-reset";
+			arm,vexpress-sysreg,func = <5 0>;
+		};
+
+		muxfpga {
+			compatible = "arm,vexpress-muxfpga";
+			arm,vexpress-sysreg,func = <7 0>;
+		};
+
+		shutdown {
+			compatible = "arm,vexpress-shutdown";
+			arm,vexpress-sysreg,func = <8 0>;
+		};
+
+		reboot {
+			compatible = "arm,vexpress-reboot";
+			arm,vexpress-sysreg,func = <9 0>;
+		};
+
+		dvimode {
+			compatible = "arm,vexpress-dvimode";
+			arm,vexpress-sysreg,func = <11 0>;
+		};
+	};
+
 	bus@8000000 {
-		motherboard {
+		motherboard-bus {
 			model = "V2M-P1";
 			arm,hbi = <0x190>;
 			arm,vexpress,site = <0>;
@@ -31,7 +185,7 @@
 			#interrupt-cells = <1>;
 			ranges;
 
-			nor_flash: flash@0,00000000 {
+			nor_flash: flash@0 {
 				compatible = "arm,vexpress-flash", "cfi-flash";
 				reg = <0 0x00000000 0x04000000>,
 				      <4 0x00000000 0x04000000>;
@@ -41,13 +195,13 @@
 				};
 			};
 
-			psram@1,00000000 {
+			psram@100000000 {
 				compatible = "arm,vexpress-psram", "mtd-ram";
 				reg = <1 0x00000000 0x02000000>;
 				bank-width = <4>;
 			};
 
-			ethernet@2,02000000 {
+			ethernet@202000000 {
 				compatible = "smsc,lan9118", "smsc,lan9115";
 				reg = <2 0x02000000 0x10000>;
 				interrupts = <15>;
@@ -59,14 +213,14 @@
 				vddvario-supply = <&v2m_fixed_3v3>;
 			};
 
-			usb@2,03000000 {
+			usb@203000000 {
 				compatible = "nxp,usb-isp1761";
 				reg = <2 0x03000000 0x20000>;
 				interrupts = <16>;
 				port1-otg;
 			};
 
-			iofpga@3,00000000 {
+			iofpga-bus@300000000 {
 				compatible = "simple-bus";
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -162,7 +316,7 @@
 					clock-names = "KMIREFCLK", "apb_pclk";
 				};
 
-				v2m_serial0: uart@90000 {
+				v2m_serial0: serial@90000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x090000 0x1000>;
 					interrupts = <5>;
@@ -170,7 +324,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial1: uart@a0000 {
+				v2m_serial1: serial@a0000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0a0000 0x1000>;
 					interrupts = <6>;
@@ -178,7 +332,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial2: uart@b0000 {
+				v2m_serial2: serial@b0000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0b0000 0x1000>;
 					interrupts = <7>;
@@ -186,7 +340,7 @@
 					clock-names = "uartclk", "apb_pclk";
 				};
 
-				v2m_serial3: uart@c0000 {
+				v2m_serial3: serial@c0000 {
 					compatible = "arm,pl011", "arm,primecell";
 					reg = <0x0c0000 0x1000>;
 					interrupts = <8>;
@@ -282,160 +436,6 @@
 					};
 				};
 			};
-
-			v2m_fixed_3v3: fixed-regulator-0 {
-				compatible = "regulator-fixed";
-				regulator-name = "3V3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			v2m_clk24mhz: clk24mhz {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <24000000>;
-				clock-output-names = "v2m:clk24mhz";
-			};
-
-			v2m_refclk1mhz: refclk1mhz {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <1000000>;
-				clock-output-names = "v2m:refclk1mhz";
-			};
-
-			v2m_refclk32khz: refclk32khz {
-				compatible = "fixed-clock";
-				#clock-cells = <0>;
-				clock-frequency = <32768>;
-				clock-output-names = "v2m:refclk32khz";
-			};
-
-			leds {
-				compatible = "gpio-leds";
-
-				user1 {
-					label = "v2m:green:user1";
-					gpios = <&v2m_led_gpios 0 0>;
-					linux,default-trigger = "heartbeat";
-				};
-
-				user2 {
-					label = "v2m:green:user2";
-					gpios = <&v2m_led_gpios 1 0>;
-					linux,default-trigger = "mmc0";
-				};
-
-				user3 {
-					label = "v2m:green:user3";
-					gpios = <&v2m_led_gpios 2 0>;
-					linux,default-trigger = "cpu0";
-				};
-
-				user4 {
-					label = "v2m:green:user4";
-					gpios = <&v2m_led_gpios 3 0>;
-					linux,default-trigger = "cpu1";
-				};
-
-				user5 {
-					label = "v2m:green:user5";
-					gpios = <&v2m_led_gpios 4 0>;
-					linux,default-trigger = "cpu2";
-				};
-
-				user6 {
-					label = "v2m:green:user6";
-					gpios = <&v2m_led_gpios 5 0>;
-					linux,default-trigger = "cpu3";
-				};
-
-				user7 {
-					label = "v2m:green:user7";
-					gpios = <&v2m_led_gpios 6 0>;
-					linux,default-trigger = "cpu4";
-				};
-
-				user8 {
-					label = "v2m:green:user8";
-					gpios = <&v2m_led_gpios 7 0>;
-					linux,default-trigger = "cpu5";
-				};
-			};
-
-			mcc {
-				compatible = "arm,vexpress,config-bus";
-				arm,vexpress,config-bridge = <&v2m_sysreg>;
-
-				oscclk0 {
-					/* MCC static memory clock */
-					compatible = "arm,vexpress-osc";
-					arm,vexpress-sysreg,func = <1 0>;
-					freq-range = <25000000 60000000>;
-					#clock-cells = <0>;
-					clock-output-names = "v2m:oscclk0";
-				};
-
-				v2m_oscclk1: oscclk1 {
-					/* CLCD clock */
-					compatible = "arm,vexpress-osc";
-					arm,vexpress-sysreg,func = <1 1>;
-					freq-range = <23750000 65000000>;
-					#clock-cells = <0>;
-					clock-output-names = "v2m:oscclk1";
-				};
-
-				v2m_oscclk2: oscclk2 {
-					/* IO FPGA peripheral clock */
-					compatible = "arm,vexpress-osc";
-					arm,vexpress-sysreg,func = <1 2>;
-					freq-range = <24000000 24000000>;
-					#clock-cells = <0>;
-					clock-output-names = "v2m:oscclk2";
-				};
-
-				volt-vio {
-					/* Logic level voltage */
-					compatible = "arm,vexpress-volt";
-					arm,vexpress-sysreg,func = <2 0>;
-					regulator-name = "VIO";
-					regulator-always-on;
-					label = "VIO";
-				};
-
-				temp-mcc {
-					/* MCC internal operating temperature */
-					compatible = "arm,vexpress-temp";
-					arm,vexpress-sysreg,func = <4 0>;
-					label = "MCC";
-				};
-
-				reset {
-					compatible = "arm,vexpress-reset";
-					arm,vexpress-sysreg,func = <5 0>;
-				};
-
-				muxfpga {
-					compatible = "arm,vexpress-muxfpga";
-					arm,vexpress-sysreg,func = <7 0>;
-				};
-
-				shutdown {
-					compatible = "arm,vexpress-shutdown";
-					arm,vexpress-sysreg,func = <8 0>;
-				};
-
-				reboot {
-					compatible = "arm,vexpress-reboot";
-					arm,vexpress-sysreg,func = <9 0>;
-				};
-
-				dvimode {
-					compatible = "arm,vexpress-dvimode";
-					arm,vexpress-sysreg,func = <11 0>;
-				};
-			};
 		};
 	};
 };
diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c
index 6005c4ed3bc6..8285be7c1eab 100644
--- a/arch/arm/mach-omap2/clockdomains44xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains44xx_data.c
@@ -214,7 +214,7 @@ static struct clockdomain l4_secure_44xx_clkdm = {
 	.dep_bit	  = OMAP4430_L4SEC_STATDEP_SHIFT,
 	.wkdep_srcs	  = l4_secure_wkup_sleep_deps,
 	.sleepdep_srcs	  = l4_secure_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain l4_per_44xx_clkdm = {
diff --git a/arch/arm/mach-omap2/clockdomains54xx_data.c b/arch/arm/mach-omap2/clockdomains54xx_data.c
index 3ab41fc89dd3..5611e08018a2 100644
--- a/arch/arm/mach-omap2/clockdomains54xx_data.c
+++ b/arch/arm/mach-omap2/clockdomains54xx_data.c
@@ -170,7 +170,7 @@ static struct clockdomain l4sec_54xx_clkdm = {
 	.dep_bit	  = OMAP54XX_L4SEC_STATDEP_SHIFT,
 	.wkdep_srcs	  = l4sec_wkup_sleep_deps,
 	.sleepdep_srcs	  = l4sec_wkup_sleep_deps,
-	.flags		  = CLKDM_CAN_HWSUP_SWSUP,
+	.flags		  = CLKDM_CAN_SWSUP,
 };
 
 static struct clockdomain iva_54xx_clkdm = {
author	Linus Torvalds <torvalds@linux-foundation.org>	2020-06-05 05:02:14 +0200
committer	Linus Torvalds <torvalds@linux-foundation.org>	2020-06-05 05:02:14 +0200
commit	9d71d3cd9ef040c284506648285915e9ba4d08c4 (patch)
tree	3baeb9955b01b1d5145389a6976ed6b69ded096f /arch/arm
parent	Merge tag 'arm-drivers-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/... (diff)
parent	Merge tag 'zynqmp-dt-for-v5.8' of https://github.com/Xilinx/linux-xlnx into a... (diff)
download	linux-9d71d3cd9ef040c284506648285915e9ba4d08c4.tar.xz linux-9d71d3cd9ef040c284506648285915e9ba4d08c4.zip