Merge tag 'v3.6-rc4' into asoc-omap

Linux 3.6-rc4

83 files changed, 1185 insertions, 278 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e91c7cdc6fe5..c5f9ae5dbd1a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -38,7 +38,6 @@ config ARM
 	select HARDIRQS_SW_RESEND
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
-	select GENERIC_IRQ_PROBE
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select HARDIRQS_SW_RESEND
 	select CPU_PM if (SUSPEND || CPU_IDLE)
@@ -126,11 +125,6 @@ config TRACE_IRQFLAGS_SUPPORT
 	bool
 	default y
 
-config GENERIC_LOCKBREAK
-	bool
-	default y
-	depends on SMP && PREEMPT
-
 config RWSEM_GENERIC_SPINLOCK
 	bool
 	default y
@@ -2150,6 +2144,7 @@ source "drivers/cpufreq/Kconfig"
 config CPU_FREQ_IMX
 	tristate "CPUfreq driver for i.MX CPUs"
 	depends on ARCH_MXC && CPU_FREQ
+	select CPU_FREQ_TABLE
 	help
 	  This enables the CPUfreq driver for i.MX CPUs.
 
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 59509c48d7e5..bd0cff3f808c 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -154,5 +154,10 @@
 			#size-cells = <0>;
 			ti,hwmods = "i2c3";
 		};
+
+		wdt2: wdt@44e35000 {
+			compatible = "ti,omap3-wdt";
+			ti,hwmods = "wd_timer2";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi
index a874dbfb5ae6..e6138310e5ce 100644
--- a/arch/arm/boot/dts/imx23.dtsi
+++ b/arch/arm/boot/dts/imx23.dtsi
@@ -51,11 +51,11 @@
 
 			dma-apbh@80004000 {
 				compatible = "fsl,imx23-dma-apbh";
-				reg = <0x80004000 2000>;
+				reg = <0x80004000 0x2000>;
 			};
 
 			ecc@80008000 {
-				reg = <0x80008000 2000>;
+				reg = <0x80008000 0x2000>;
 				status = "disabled";
 			};
 
@@ -63,7 +63,7 @@
 				compatible = "fsl,imx23-gpmi-nand";
 				#address-cells = <1>;
 				#size-cells = <1>;
-				reg = <0x8000c000 2000>, <0x8000a000 2000>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
 				interrupts = <13>, <56>;
 				interrupt-names = "gpmi-dma", "bch";
@@ -72,14 +72,14 @@
 			};
 
 			ssp0: ssp@80010000 {
-				reg = <0x80010000 2000>;
+				reg = <0x80010000 0x2000>;
 				interrupts = <15 14>;
 				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
 			etm@80014000 {
-				reg = <0x80014000 2000>;
+				reg = <0x80014000 0x2000>;
 				status = "disabled";
 			};
 
@@ -87,7 +87,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx23-pinctrl", "simple-bus";
-				reg = <0x80018000 2000>;
+				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
 					compatible = "fsl,imx23-gpio", "fsl,mxs-gpio";
@@ -273,32 +273,32 @@
 			};
 
 			emi@80020000 {
-				reg = <0x80020000 2000>;
+				reg = <0x80020000 0x2000>;
 				status = "disabled";
 			};
 
 			dma-apbx@80024000 {
 				compatible = "fsl,imx23-dma-apbx";
-				reg = <0x80024000 2000>;
+				reg = <0x80024000 0x2000>;
 			};
 
 			dcp@80028000 {
-				reg = <0x80028000 2000>;
+				reg = <0x80028000 0x2000>;
 				status = "disabled";
 			};
 
 			pxp@8002a000 {
-				reg = <0x8002a000 2000>;
+				reg = <0x8002a000 0x2000>;
 				status = "disabled";
 			};
 
 			ocotp@8002c000 {
-				reg = <0x8002c000 2000>;
+				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
 
 			axi-ahb@8002e000 {
-				reg = <0x8002e000 2000>;
+				reg = <0x8002e000 0x2000>;
 				status = "disabled";
 			};
 
@@ -310,14 +310,14 @@
 			};
 
 			ssp1: ssp@80034000 {
-				reg = <0x80034000 2000>;
+				reg = <0x80034000 0x2000>;
 				interrupts = <2 20>;
 				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
 			tvenc@80038000 {
-				reg = <0x80038000 2000>;
+				reg = <0x80038000 0x2000>;
 				status = "disabled";
 			};
                 };
@@ -330,37 +330,37 @@
 			ranges;
 
 			clkctl@80040000 {
-				reg = <0x80040000 2000>;
+				reg = <0x80040000 0x2000>;
 				status = "disabled";
 			};
 
 			saif0: saif@80042000 {
-				reg = <0x80042000 2000>;
+				reg = <0x80042000 0x2000>;
 				status = "disabled";
 			};
 
 			power@80044000 {
-				reg = <0x80044000 2000>;
+				reg = <0x80044000 0x2000>;
 				status = "disabled";
 			};
 
 			saif1: saif@80046000 {
-				reg = <0x80046000 2000>;
+				reg = <0x80046000 0x2000>;
 				status = "disabled";
 			};
 
 			audio-out@80048000 {
-				reg = <0x80048000 2000>;
+				reg = <0x80048000 0x2000>;
 				status = "disabled";
 			};
 
 			audio-in@8004c000 {
-				reg = <0x8004c000 2000>;
+				reg = <0x8004c000 0x2000>;
 				status = "disabled";
 			};
 
 			lradc@80050000 {
-				reg = <0x80050000 2000>;
+				reg = <0x80050000 0x2000>;
 				status = "disabled";
 			};
 
@@ -370,26 +370,26 @@
 			};
 
 			i2c@80058000 {
-				reg = <0x80058000 2000>;
+				reg = <0x80058000 0x2000>;
 				status = "disabled";
 			};
 
 			rtc@8005c000 {
 				compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x8005c000 2000>;
+				reg = <0x8005c000 0x2000>;
 				interrupts = <22>;
 			};
 
 			pwm: pwm@80064000 {
 				compatible = "fsl,imx23-pwm";
-				reg = <0x80064000 2000>;
+				reg = <0x80064000 0x2000>;
 				#pwm-cells = <2>;
 				fsl,pwm-number = <5>;
 				status = "disabled";
 			};
 
 			timrot@80068000 {
-				reg = <0x80068000 2000>;
+				reg = <0x80068000 0x2000>;
 				status = "disabled";
 			};
 
@@ -429,7 +429,7 @@
 		ranges;
 
 		usbctrl@80080000 {
-			reg = <0x80080000 0x10000>;
+			reg = <0x80080000 0x40000>;
 			status = "disabled";
 		};
 	};
diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts
index d3f8296e19e0..0a8978a40ece 100644
--- a/arch/arm/boot/dts/imx27-3ds.dts
+++ b/arch/arm/boot/dts/imx27-3ds.dts
@@ -27,7 +27,7 @@
 				status = "okay";
 			};
 
-			uart@1000a000 {
+			uart1: serial@1000a000 {
 				fsl,uart-has-rtscts;
 				status = "okay";
 			};
diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
index 00bae3aad5ab..5303ab680a34 100644
--- a/arch/arm/boot/dts/imx27.dtsi
+++ b/arch/arm/boot/dts/imx27.dtsi
@@ -19,6 +19,12 @@
 		serial3 = &uart4;
 		serial4 = &uart5;
 		serial5 = &uart6;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
 	};
 
 	avic: avic-interrupt-controller@e0000000 {
diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi
index 787efac68da8..3fa6d190fab4 100644
--- a/arch/arm/boot/dts/imx28.dtsi
+++ b/arch/arm/boot/dts/imx28.dtsi
@@ -57,18 +57,18 @@
 			};
 
 			hsadc@80002000 {
-				reg = <0x80002000 2000>;
+				reg = <0x80002000 0x2000>;
 				interrupts = <13 87>;
 				status = "disabled";
 			};
 
 			dma-apbh@80004000 {
 				compatible = "fsl,imx28-dma-apbh";
-				reg = <0x80004000 2000>;
+				reg = <0x80004000 0x2000>;
 			};
 
 			perfmon@80006000 {
-				reg = <0x80006000 800>;
+				reg = <0x80006000 0x800>;
 				interrupts = <27>;
 				status = "disabled";
 			};
@@ -77,7 +77,7 @@
 				compatible = "fsl,imx28-gpmi-nand";
 				#address-cells = <1>;
 				#size-cells = <1>;
-				reg = <0x8000c000 2000>, <0x8000a000 2000>;
+				reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 				reg-names = "gpmi-nand", "bch";
 				interrupts = <88>, <41>;
 				interrupt-names = "gpmi-dma", "bch";
@@ -86,28 +86,28 @@
 			};
 
 			ssp0: ssp@80010000 {
-				reg = <0x80010000 2000>;
+				reg = <0x80010000 0x2000>;
 				interrupts = <96 82>;
 				fsl,ssp-dma-channel = <0>;
 				status = "disabled";
 			};
 
 			ssp1: ssp@80012000 {
-				reg = <0x80012000 2000>;
+				reg = <0x80012000 0x2000>;
 				interrupts = <97 83>;
 				fsl,ssp-dma-channel = <1>;
 				status = "disabled";
 			};
 
 			ssp2: ssp@80014000 {
-				reg = <0x80014000 2000>;
+				reg = <0x80014000 0x2000>;
 				interrupts = <98 84>;
 				fsl,ssp-dma-channel = <2>;
 				status = "disabled";
 			};
 
 			ssp3: ssp@80016000 {
-				reg = <0x80016000 2000>;
+				reg = <0x80016000 0x2000>;
 				interrupts = <99 85>;
 				fsl,ssp-dma-channel = <3>;
 				status = "disabled";
@@ -117,7 +117,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-pinctrl", "simple-bus";
-				reg = <0x80018000 2000>;
+				reg = <0x80018000 0x2000>;
 
 				gpio0: gpio@0 {
 					compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
@@ -510,96 +510,96 @@
 			};
 
 			digctl@8001c000 {
-				reg = <0x8001c000 2000>;
+				reg = <0x8001c000 0x2000>;
 				interrupts = <89>;
 				status = "disabled";
 			};
 
 			etm@80022000 {
-				reg = <0x80022000 2000>;
+				reg = <0x80022000 0x2000>;
 				status = "disabled";
 			};
 
 			dma-apbx@80024000 {
 				compatible = "fsl,imx28-dma-apbx";
-				reg = <0x80024000 2000>;
+				reg = <0x80024000 0x2000>;
 			};
 
 			dcp@80028000 {
-				reg = <0x80028000 2000>;
+				reg = <0x80028000 0x2000>;
 				interrupts = <52 53 54>;
 				status = "disabled";
 			};
 
 			pxp@8002a000 {
-				reg = <0x8002a000 2000>;
+				reg = <0x8002a000 0x2000>;
 				interrupts = <39>;
 				status = "disabled";
 			};
 
 			ocotp@8002c000 {
-				reg = <0x8002c000 2000>;
+				reg = <0x8002c000 0x2000>;
 				status = "disabled";
 			};
 
 			axi-ahb@8002e000 {
-				reg = <0x8002e000 2000>;
+				reg = <0x8002e000 0x2000>;
 				status = "disabled";
 			};
 
 			lcdif@80030000 {
 				compatible = "fsl,imx28-lcdif";
-				reg = <0x80030000 2000>;
+				reg = <0x80030000 0x2000>;
 				interrupts = <38 86>;
 				status = "disabled";
 			};
 
 			can0: can@80032000 {
 				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
-				reg = <0x80032000 2000>;
+				reg = <0x80032000 0x2000>;
 				interrupts = <8>;
 				status = "disabled";
 			};
 
 			can1: can@80034000 {
 				compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
-				reg = <0x80034000 2000>;
+				reg = <0x80034000 0x2000>;
 				interrupts = <9>;
 				status = "disabled";
 			};
 
 			simdbg@8003c000 {
-				reg = <0x8003c000 200>;
+				reg = <0x8003c000 0x200>;
 				status = "disabled";
 			};
 
 			simgpmisel@8003c200 {
-				reg = <0x8003c200 100>;
+				reg = <0x8003c200 0x100>;
 				status = "disabled";
 			};
 
 			simsspsel@8003c300 {
-				reg = <0x8003c300 100>;
+				reg = <0x8003c300 0x100>;
 				status = "disabled";
 			};
 
 			simmemsel@8003c400 {
-				reg = <0x8003c400 100>;
+				reg = <0x8003c400 0x100>;
 				status = "disabled";
 			};
 
 			gpiomon@8003c500 {
-				reg = <0x8003c500 100>;
+				reg = <0x8003c500 0x100>;
 				status = "disabled";
 			};
 
 			simenet@8003c700 {
-				reg = <0x8003c700 100>;
+				reg = <0x8003c700 0x100>;
 				status = "disabled";
 			};
 
 			armjtag@8003c800 {
-				reg = <0x8003c800 100>;
+				reg = <0x8003c800 0x100>;
 				status = "disabled";
 			};
                 };
@@ -612,45 +612,45 @@
 			ranges;
 
 			clkctl@80040000 {
-				reg = <0x80040000 2000>;
+				reg = <0x80040000 0x2000>;
 				status = "disabled";
 			};
 
 			saif0: saif@80042000 {
 				compatible = "fsl,imx28-saif";
-				reg = <0x80042000 2000>;
+				reg = <0x80042000 0x2000>;
 				interrupts = <59 80>;
 				fsl,saif-dma-channel = <4>;
 				status = "disabled";
 			};
 
 			power@80044000 {
-				reg = <0x80044000 2000>;
+				reg = <0x80044000 0x2000>;
 				status = "disabled";
 			};
 
 			saif1: saif@80046000 {
 				compatible = "fsl,imx28-saif";
-				reg = <0x80046000 2000>;
+				reg = <0x80046000 0x2000>;
 				interrupts = <58 81>;
 				fsl,saif-dma-channel = <5>;
 				status = "disabled";
 			};
 
 			lradc@80050000 {
-				reg = <0x80050000 2000>;
+				reg = <0x80050000 0x2000>;
 				status = "disabled";
 			};
 
 			spdif@80054000 {
-				reg = <0x80054000 2000>;
+				reg = <0x80054000 0x2000>;
 				interrupts = <45 66>;
 				status = "disabled";
 			};
 
 			rtc@80056000 {
 				compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
-				reg = <0x80056000 2000>;
+				reg = <0x80056000 0x2000>;
 				interrupts = <29>;
 			};
 
@@ -658,7 +658,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-i2c";
-				reg = <0x80058000 2000>;
+				reg = <0x80058000 0x2000>;
 				interrupts = <111 68>;
 				clock-frequency = <100000>;
 				status = "disabled";
@@ -668,7 +668,7 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx28-i2c";
-				reg = <0x8005a000 2000>;
+				reg = <0x8005a000 0x2000>;
 				interrupts = <110 69>;
 				clock-frequency = <100000>;
 				status = "disabled";
@@ -676,14 +676,14 @@
 
 			pwm: pwm@80064000 {
 				compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
-				reg = <0x80064000 2000>;
+				reg = <0x80064000 0x2000>;
 				#pwm-cells = <2>;
 				fsl,pwm-number = <8>;
 				status = "disabled";
 			};
 
 			timrot@80068000 {
-				reg = <0x80068000 2000>;
+				reg = <0x80068000 0x2000>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts
index de065b5976e6..59d9789e5508 100644
--- a/arch/arm/boot/dts/imx51-babbage.dts
+++ b/arch/arm/boot/dts/imx51-babbage.dts
@@ -25,8 +25,8 @@
 		aips@70000000 { /* aips-1 */
 			spba@70000000 {
 				esdhc@70004000 { /* ESDHC1 */
-					fsl,cd-internal;
-					fsl,wp-internal;
+					fsl,cd-controller;
+					fsl,wp-controller;
 					status = "okay";
 				};
 
@@ -53,7 +53,7 @@
 						spi-max-frequency = <6000000>;
 						reg = <0>;
 						interrupt-parent = <&gpio1>;
-						interrupts = <8>;
+						interrupts = <8 0x4>;
 
 						regulators {
 							sw1_reg: sw1 {
diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
index 53cbaa3d4f90..aba28dc87fc8 100644
--- a/arch/arm/boot/dts/imx51.dtsi
+++ b/arch/arm/boot/dts/imx51.dtsi
@@ -17,6 +17,10 @@
 		serial0 = &uart1;
 		serial1 = &uart2;
 		serial2 = &uart3;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
 	};
 
 	tzic: tz-interrupt-controller@e0000000 {
diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts
index 5b8eafcdbeec..da895e93a999 100644
--- a/arch/arm/boot/dts/imx53-ard.dts
+++ b/arch/arm/boot/dts/imx53-ard.dts
@@ -64,12 +64,32 @@
 			reg = <0xf4000000 0x2000000>;
 			phy-mode = "mii";
 			interrupt-parent = <&gpio2>;
-			interrupts = <31>;
+			interrupts = <31 0x8>;
 			reg-io-width = <4>;
+			/*
+			 * VDD33A and VDDVARIO of LAN9220 are supplied by
+			 * SW4_3V3 of LTC3589.  Before the regulator driver
+			 * for this PMIC is available, we use a fixed dummy
+			 * 3V3 regulator to get LAN9220 driver probing work.
+			 */
+			vdd33a-supply = <&reg_3p3v>;
+			vddvario-supply = <&reg_3p3v>;
 			smsc,irq-push-pull;
 		};
 	};
 
+	regulators {
+		compatible = "simple-bus";
+
+		reg_3p3v: 3p3v {
+			compatible = "regulator-fixed";
+			regulator-name = "3P3V";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index fc79cdc4b4e6..cd37165edce5 100644
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -19,6 +19,13 @@
 		serial2 = &uart3;
 		serial3 = &uart4;
 		serial4 = &uart5;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
 	};
 
 	tzic: tz-interrupt-controller@0fffc000 {
diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts
index d42e851ceb97..72f30f3e6171 100644
--- a/arch/arm/boot/dts/imx6q-sabrelite.dts
+++ b/arch/arm/boot/dts/imx6q-sabrelite.dts
@@ -53,6 +53,7 @@
 						fsl,pins = <
 							   144  0x80000000	/* MX6Q_PAD_EIM_D22__GPIO_3_22 */
 							   121  0x80000000	/* MX6Q_PAD_EIM_D19__GPIO_3_19 */
+							   953  0x80000000	/* MX6Q_PAD_GPIO_0__CCM_CLKO */
 							   >;
 					};
 				};
diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi
index 3d3c64b014e6..fd57079f71a9 100644
--- a/arch/arm/boot/dts/imx6q.dtsi
+++ b/arch/arm/boot/dts/imx6q.dtsi
@@ -19,6 +19,13 @@
 		serial2 = &uart3;
 		serial3 = &uart4;
 		serial4 = &uart5;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		gpio6 = &gpio7;
 	};
 
 	cpus {
diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts
index 52d947045106..f8ca6fa88192 100644
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
@@ -41,9 +41,13 @@
 		};
 		power-blue {
 			label = "power:blue";
-			gpios = <&gpio1 11 0>;
+			gpios = <&gpio1 10 0>;
 			linux,default-trigger = "timer";
 		};
+		power-red {
+			label = "power:red";
+			gpios = <&gpio1 11 0>;
+		};
 		usb1 {
 			label = "usb1:blue";
 			gpios = <&gpio1 12 0>;
diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi
index 3b2f3510d7eb..d351b27d7213 100644
--- a/arch/arm/boot/dts/twl6030.dtsi
+++ b/arch/arm/boot/dts/twl6030.dtsi
@@ -66,6 +66,7 @@
 
 	vcxio: regulator@8 {
 		compatible = "ti,twl6030-vcxio";
+		regulator-always-on;
 	};
 
 	vusb: regulator@9 {
@@ -74,10 +75,12 @@
 
 	v1v8: regulator@10 {
 		compatible = "ti,twl6030-v1v8";
+		regulator-always-on;
 	};
 
 	v2v1: regulator@11 {
 		compatible = "ti,twl6030-v2v1";
+		regulator-always-on;
 	};
 
 	clk32kg: regulator@12 {
diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index f725b9637b33..3c9f32f9b6b4 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -192,6 +192,7 @@ CONFIG_RTC_DRV_MC13XXX=y
 CONFIG_RTC_DRV_MXC=y
 CONFIG_DMADEVICES=y
 CONFIG_IMX_SDMA=y
+CONFIG_MXS_DMA=y
 CONFIG_COMMON_CLK_DEBUG=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT2_FS=y
diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig
index ccdb6357fb74..4edcfb4e4dee 100644
--- a/arch/arm/configs/mxs_defconfig
+++ b/arch/arm/configs/mxs_defconfig
@@ -34,7 +34,6 @@ CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
-CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
 CONFIG_AUTO_ZRELADDR=y
 CONFIG_FPE_NWFPE=y
 CONFIG_NET=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 1d24f8458bef..71277a1591ba 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -7,7 +7,7 @@ CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_EXPERT=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_BUG is not set
+# CONFIG_BUGVERBOSE is not set
 # CONFIG_ELF_CORE is not set
 # CONFIG_SHMEM is not set
 CONFIG_SLOB=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 2d4f661d1cf6..da6845493caa 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_LM3530=y
 CONFIG_LEDS_LP5521=y
+CONFIG_LEDS_GPIO=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_AB8500=y
 CONFIG_RTC_DRV_PL031=y
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index f66626d71e7d..41dc31f834c3 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -195,6 +195,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd)
 
 #define pte_clear(mm,addr,ptep)	set_pte_ext(ptep, __pte(0), 0)
 
+#define pte_none(pte)		(!pte_val(pte))
+#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
+#define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
+#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
+#define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
+#define pte_special(pte)	(0)
+
+#define pte_present_user(pte) \
+	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
+	 (L_PTE_PRESENT | L_PTE_USER))
+
 #if __LINUX_ARM_ARCH__ < 6
 static inline void __sync_icache_dcache(pte_t pteval)
 {
@@ -206,25 +218,15 @@ extern void __sync_icache_dcache(pte_t pteval);
 static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pteval)
 {
-	if (addr >= TASK_SIZE)
-		set_pte_ext(ptep, pteval, 0);
-	else {
+	unsigned long ext = 0;
+
+	if (addr < TASK_SIZE && pte_present_user(pteval)) {
 		__sync_icache_dcache(pteval);
-		set_pte_ext(ptep, pteval, PTE_EXT_NG);
+		ext |= PTE_EXT_NG;
 	}
-}
 
-#define pte_none(pte)		(!pte_val(pte))
-#define pte_present(pte)	(pte_val(pte) & L_PTE_PRESENT)
-#define pte_write(pte)		(!(pte_val(pte) & L_PTE_RDONLY))
-#define pte_dirty(pte)		(pte_val(pte) & L_PTE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & L_PTE_YOUNG)
-#define pte_exec(pte)		(!(pte_val(pte) & L_PTE_XN))
-#define pte_special(pte)	(0)
-
-#define pte_present_user(pte) \
-	((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
-	 (L_PTE_PRESENT | L_PTE_USER))
+	set_pte_ext(ptep, pteval, ext);
+}
 
 #define PTE_BIT_FUNC(fn,op) \
 static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
@@ -251,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
  *
  *   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
  *   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- *   <--------------- offset --------------------> <- type --> 0 0 0
+ *   <--------------- offset ----------------------> < type -> 0 0 0
  *
- * This gives us up to 63 swap files and 32GB per swap file.  Note that
+ * This gives us up to 31 swap files and 64GB per swap file.  Note that
  * the offset field is always non-zero.
  */
 #define __SWP_TYPE_SHIFT	3
-#define __SWP_TYPE_BITS		6
+#define __SWP_TYPE_BITS		5
 #define __SWP_TYPE_MASK		((1 << __SWP_TYPE_BITS) - 1)
 #define __SWP_OFFSET_SHIFT	(__SWP_TYPE_BITS + __SWP_TYPE_SHIFT)
 
diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h
index e3f757263438..05b8e82ec9f5 100644
--- a/arch/arm/include/asm/sched_clock.h
+++ b/arch/arm/include/asm/sched_clock.h
@@ -10,5 +10,7 @@
 
 extern void sched_clock_postinit(void);
 extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate);
+extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
+		unsigned long rate);
 
 #endif
diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c
index 27d186abbc06..f4515393248d 100644
--- a/arch/arm/kernel/sched_clock.c
+++ b/arch/arm/kernel/sched_clock.c
@@ -21,6 +21,8 @@ struct clock_data {
 	u32 epoch_cyc_copy;
 	u32 mult;
 	u32 shift;
+	bool suspended;
+	bool needs_suspend;
 };
 
 static void sched_clock_poll(unsigned long wrap_ticks);
@@ -49,6 +51,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask)
 	u64 epoch_ns;
 	u32 epoch_cyc;
 
+	if (cd.suspended)
+		return cd.epoch_ns;
+
 	/*
 	 * Load the epoch_cyc and epoch_ns atomically.  We do this by
 	 * ensuring that we always write epoch_cyc, epoch_ns and
@@ -98,6 +103,13 @@ static void sched_clock_poll(unsigned long wrap_ticks)
 	update_sched_clock();
 }
 
+void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits,
+		unsigned long rate)
+{
+	setup_sched_clock(read, bits, rate);
+	cd.needs_suspend = true;
+}
+
 void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate)
 {
 	unsigned long r, w;
@@ -169,11 +181,23 @@ void __init sched_clock_postinit(void)
 static int sched_clock_suspend(void)
 {
 	sched_clock_poll(sched_clock_timer.data);
+	if (cd.needs_suspend)
+		cd.suspended = true;
 	return 0;
 }
 
+static void sched_clock_resume(void)
+{
+	if (cd.needs_suspend) {
+		cd.epoch_cyc = read_sched_clock();
+		cd.epoch_cyc_copy = cd.epoch_cyc;
+		cd.suspended = false;
+	}
+}
+
 static struct syscore_ops sched_clock_ops = {
 	.suspend = sched_clock_suspend,
+	.resume = sched_clock_resume,
 };
 
 static int __init sched_clock_syscore_init(void)
diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c
index 198b08456e90..26c12c6440fc 100644
--- a/arch/arm/kernel/topology.c
+++ b/arch/arm/kernel/topology.c
@@ -321,7 +321,7 @@ void store_cpu_topology(unsigned int cpuid)
  * init_cpu_topology is called at boot when only one cpu is running
  * which prevent simultaneous write access to cpu_topology array
  */
-void init_cpu_topology(void)
+void __init init_cpu_topology(void)
 {
 	unsigned int cpu;
 
diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile
index 2473fd1fd51c..af72969820b4 100644
--- a/arch/arm/lib/Makefile
+++ b/arch/arm/lib/Makefile
@@ -16,13 +16,30 @@ lib-y		:= backtrace.o changebit.o csumipv6.o csumpartial.o   \
 		   call_with_stack.o
 
 mmu-y	:= clear_user.o copy_page.o getuser.o putuser.o
-mmu-y	+= copy_from_user.o copy_to_user.o
+
+# the code in uaccess.S is not preemption safe and
+# probably faster on ARMv3 only
+ifeq ($(CONFIG_PREEMPT),y)
+  mmu-y	+= copy_from_user.o copy_to_user.o
+else
+ifneq ($(CONFIG_CPU_32v3),y)
+  mmu-y	+= copy_from_user.o copy_to_user.o
+else
+  mmu-y	+= uaccess.o
+endif
+endif
 
 # using lib_ here won't override already available weak symbols
 obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o
 
-lib-$(CONFIG_MMU)		+= $(mmu-y)
-lib-y				+= io-readsw-armv4.o io-writesw-armv4.o
+lib-$(CONFIG_MMU) += $(mmu-y)
+
+ifeq ($(CONFIG_CPU_32v3),y)
+  lib-y	+= io-readsw-armv3.o io-writesw-armv3.o
+else
+  lib-y	+= io-readsw-armv4.o io-writesw-armv4.o
+endif
+
 lib-$(CONFIG_ARCH_RPC)		+= ecard.o io-acorn.o floppydma.o
 lib-$(CONFIG_ARCH_SHARK)	+= io-shark.o
 
diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S
new file mode 100644
index 000000000000..88487c8c4f23
--- /dev/null
+++ b/arch/arm/lib/io-readsw-armv3.S
@@ -0,0 +1,106 @@
+/*
+ *  linux/arch/arm/lib/io-readsw-armv3.S
+ *
+ *  Copyright (C) 1995-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+.Linsw_bad_alignment:
+		adr	r0, .Linsw_bad_align_msg
+		mov	r2, lr
+		b	panic
+.Linsw_bad_align_msg:
+		.asciz	"insw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
+		.align
+
+.Linsw_align:	tst	r1, #1
+		bne	.Linsw_bad_alignment
+
+		ldr	r3, [r0]
+		strb	r3, [r1], #1
+		mov	r3, r3, lsr #8
+		strb	r3, [r1], #1
+
+		subs	r2, r2, #1
+		moveq	pc, lr
+
+ENTRY(__raw_readsw)
+		teq	r2, #0		@ do we have to check for the zero len?
+		moveq	pc, lr
+		tst	r1, #3
+		bne	.Linsw_align
+
+.Linsw_aligned:	mov	ip, #0xff
+		orr	ip, ip, ip, lsl #8
+		stmfd	sp!, {r4, r5, r6, lr}
+
+		subs	r2, r2, #8
+		bmi	.Lno_insw_8
+
+.Linsw_8_lp:	ldr	r3, [r0]
+		and	r3, r3, ip
+		ldr	r4, [r0]
+		orr	r3, r3, r4, lsl #16
+
+		ldr	r4, [r0]
+		and	r4, r4, ip
+		ldr	r5, [r0]
+		orr	r4, r4, r5, lsl #16
+
+		ldr	r5, [r0]
+		and	r5, r5, ip
+		ldr	r6, [r0]
+		orr	r5, r5, r6, lsl #16
+
+		ldr	r6, [r0]
+		and	r6, r6, ip
+		ldr	lr, [r0]
+		orr	r6, r6, lr, lsl #16
+
+		stmia	r1!, {r3 - r6}
+
+		subs	r2, r2, #8
+		bpl	.Linsw_8_lp
+
+		tst	r2, #7
+		ldmeqfd	sp!, {r4, r5, r6, pc}
+
+.Lno_insw_8:	tst	r2, #4
+		beq	.Lno_insw_4
+
+		ldr	r3, [r0]
+		and	r3, r3, ip
+		ldr	r4, [r0]
+		orr	r3, r3, r4, lsl #16
+
+		ldr	r4, [r0]
+		and	r4, r4, ip
+		ldr	r5, [r0]
+		orr	r4, r4, r5, lsl #16
+
+		stmia	r1!, {r3, r4}
+
+.Lno_insw_4:	tst	r2, #2
+		beq	.Lno_insw_2
+
+		ldr	r3, [r0]
+		and	r3, r3, ip
+		ldr	r4, [r0]
+		orr	r3, r3, r4, lsl #16
+
+		str	r3, [r1], #4
+
+.Lno_insw_2:	tst	r2, #1
+		ldrne	r3, [r0]
+		strneb	r3, [r1], #1
+		movne	r3, r3, lsr #8
+		strneb	r3, [r1]
+
+		ldmfd	sp!, {r4, r5, r6, pc}
+
+
diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S
new file mode 100644
index 000000000000..49b800419e32
--- /dev/null
+++ b/arch/arm/lib/io-writesw-armv3.S
@@ -0,0 +1,126 @@
+/*
+ *  linux/arch/arm/lib/io-writesw-armv3.S
+ *
+ *  Copyright (C) 1995-2000 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+.Loutsw_bad_alignment:
+		adr	r0, .Loutsw_bad_align_msg
+		mov	r2, lr
+		b	panic
+.Loutsw_bad_align_msg:
+		.asciz	"outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n"
+		.align
+
+.Loutsw_align:	tst	r1, #1
+		bne	.Loutsw_bad_alignment
+
+		add	r1, r1, #2
+
+		ldr	r3, [r1, #-4]
+		mov	r3, r3, lsr #16
+		orr	r3, r3, r3, lsl #16
+		str	r3, [r0]
+		subs	r2, r2, #1
+		moveq	pc, lr
+
+ENTRY(__raw_writesw)
+		teq	r2, #0		@ do we have to check for the zero len?
+		moveq	pc, lr
+		tst	r1, #3
+		bne	.Loutsw_align
+
+		stmfd	sp!, {r4, r5, r6, lr}
+
+		subs	r2, r2, #8
+		bmi	.Lno_outsw_8
+
+.Loutsw_8_lp:	ldmia	r1!, {r3, r4, r5, r6}
+
+		mov	ip, r3, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r3, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r5, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r5, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r6, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r6, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		subs	r2, r2, #8
+		bpl	.Loutsw_8_lp
+
+		tst	r2, #7
+		ldmeqfd	sp!, {r4, r5, r6, pc}
+
+.Lno_outsw_8:	tst	r2, #4
+		beq	.Lno_outsw_4
+
+		ldmia	r1!, {r3, r4}
+
+		mov	ip, r3, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r3, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r4, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+.Lno_outsw_4:	tst	r2, #2
+		beq	.Lno_outsw_2
+
+		ldr	r3, [r1], #4
+
+		mov	ip, r3, lsl #16
+		orr	ip, ip, ip, lsr #16
+		str	ip, [r0]
+
+		mov	ip, r3, lsr #16
+		orr	ip, ip, ip, lsl #16
+		str	ip, [r0]
+
+.Lno_outsw_2:	tst	r2, #1
+
+		ldrne	r3, [r1]
+
+		movne	ip, r3, lsl #16
+		orrne	ip, ip, ip, lsr #16
+		strne	ip, [r0]
+
+		ldmfd	sp!, {r4, r5, r6, pc}
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
new file mode 100644
index 000000000000..5c908b1cb8ed
--- /dev/null
+++ b/arch/arm/lib/uaccess.S
@@ -0,0 +1,564 @@
+/*
+ *  linux/arch/arm/lib/uaccess.S
+ *
+ *  Copyright (C) 1995, 1996,1997,1998 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *  Routines to block copy data to/from user memory
+ *   These are highly optimised both for the 4k page size
+ *   and for various alignments.
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/errno.h>
+#include <asm/domain.h>
+
+		.text
+
+#define PAGE_SHIFT 12
+
+/* Prototype: int __copy_to_user(void *to, const char *from, size_t n)
+ * Purpose  : copy a block to user memory from kernel memory
+ * Params   : to   - user memory
+ *          : from - kernel memory
+ *          : n    - number of bytes to copy
+ * Returns  : Number of bytes NOT copied.
+ */
+
+.Lc2u_dest_not_aligned:
+		rsb	ip, ip, #4
+		cmp	ip, #2
+		ldrb	r3, [r1], #1
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		ldrgeb	r3, [r1], #1
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		ldrgtb	r3, [r1], #1
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		sub	r2, r2, ip
+		b	.Lc2u_dest_aligned
+
+ENTRY(__copy_to_user)
+		stmfd	sp!, {r2, r4 - r7, lr}
+		cmp	r2, #4
+		blt	.Lc2u_not_enough
+		ands	ip, r0, #3
+		bne	.Lc2u_dest_not_aligned
+.Lc2u_dest_aligned:
+
+		ands	ip, r1, #3
+		bne	.Lc2u_src_not_aligned
+/*
+ * Seeing as there has to be at least 8 bytes to copy, we can
+ * copy one word, and force a user-mode page fault...
+ */
+
+.Lc2u_0fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lc2u_0nowords
+		ldr	r3, [r1], #4
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
+		mov	ip, r0, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lc2u_0fupi
+/*
+ * ip = max no. of bytes to copy before needing another "strt" insn
+ */
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #32
+		blt	.Lc2u_0rem8lp
+
+.Lc2u_0cpy8lp:	ldmia	r1!, {r3 - r6}
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		ldmia	r1!, {r3 - r6}
+		subs	ip, ip, #32
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		bpl	.Lc2u_0cpy8lp
+
+.Lc2u_0rem8lp:	cmn	ip, #16
+		ldmgeia	r1!, {r3 - r6}
+		stmgeia	r0!, {r3 - r6}			@ Shouldnt fault
+		tst	ip, #8
+		ldmneia	r1!, {r3 - r4}
+		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
+		tst	ip, #4
+		ldrne	r3, [r1], #4
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
+		ands	ip, ip, #3
+		beq	.Lc2u_0fupi
+.Lc2u_0nowords:	teq	ip, #0
+		beq	.Lc2u_finished
+.Lc2u_nowords:	cmp	ip, #2
+		ldrb	r3, [r1], #1
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		ldrgeb	r3, [r1], #1
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		ldrgtb	r3, [r1], #1
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		b	.Lc2u_finished
+
+.Lc2u_not_enough:
+		movs	ip, r2
+		bne	.Lc2u_nowords
+.Lc2u_finished:	mov	r0, #0
+		ldmfd	sp!, {r2, r4 - r7, pc}
+
+.Lc2u_src_not_aligned:
+		bic	r1, r1, #3
+		ldr	r7, [r1], #4
+		cmp	ip, #2
+		bgt	.Lc2u_3fupi
+		beq	.Lc2u_2fupi
+.Lc2u_1fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lc2u_1nowords
+		mov	r3, r7, pull #8
+		ldr	r7, [r1], #4
+		orr	r3, r3, r7, push #24
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
+		mov	ip, r0, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lc2u_1fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lc2u_1rem8lp
+
+.Lc2u_1cpy8lp:	mov	r3, r7, pull #8
+		ldmia	r1!, {r4 - r7}
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #24
+		mov	r4, r4, pull #8
+		orr	r4, r4, r5, push #24
+		mov	r5, r5, pull #8
+		orr	r5, r5, r6, push #24
+		mov	r6, r6, pull #8
+		orr	r6, r6, r7, push #24
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		bpl	.Lc2u_1cpy8lp
+
+.Lc2u_1rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #8
+		ldmneia	r1!, {r4, r7}
+		orrne	r3, r3, r4, push #24
+		movne	r4, r4, pull #8
+		orrne	r4, r4, r7, push #24
+		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
+		tst	ip, #4
+		movne	r3, r7, pull #8
+		ldrne	r7, [r1], #4
+		orrne	r3, r3, r7, push #24
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
+		ands	ip, ip, #3
+		beq	.Lc2u_1fupi
+.Lc2u_1nowords:	mov	r3, r7, get_byte_1
+		teq	ip, #0
+		beq	.Lc2u_finished
+		cmp	ip, #2
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		movge	r3, r7, get_byte_2
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		movgt	r3, r7, get_byte_3
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		b	.Lc2u_finished
+
+.Lc2u_2fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lc2u_2nowords
+		mov	r3, r7, pull #16
+		ldr	r7, [r1], #4
+		orr	r3, r3, r7, push #16
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
+		mov	ip, r0, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lc2u_2fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lc2u_2rem8lp
+
+.Lc2u_2cpy8lp:	mov	r3, r7, pull #16
+		ldmia	r1!, {r4 - r7}
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #16
+		mov	r4, r4, pull #16
+		orr	r4, r4, r5, push #16
+		mov	r5, r5, pull #16
+		orr	r5, r5, r6, push #16
+		mov	r6, r6, pull #16
+		orr	r6, r6, r7, push #16
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		bpl	.Lc2u_2cpy8lp
+
+.Lc2u_2rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #16
+		ldmneia	r1!, {r4, r7}
+		orrne	r3, r3, r4, push #16
+		movne	r4, r4, pull #16
+		orrne	r4, r4, r7, push #16
+		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
+		tst	ip, #4
+		movne	r3, r7, pull #16
+		ldrne	r7, [r1], #4
+		orrne	r3, r3, r7, push #16
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
+		ands	ip, ip, #3
+		beq	.Lc2u_2fupi
+.Lc2u_2nowords:	mov	r3, r7, get_byte_2
+		teq	ip, #0
+		beq	.Lc2u_finished
+		cmp	ip, #2
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		movge	r3, r7, get_byte_3
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		ldrgtb	r3, [r1], #0
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		b	.Lc2u_finished
+
+.Lc2u_3fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lc2u_3nowords
+		mov	r3, r7, pull #24
+		ldr	r7, [r1], #4
+		orr	r3, r3, r7, push #8
+USER(	TUSER(	str)	r3, [r0], #4)			@ May fault
+		mov	ip, r0, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lc2u_3fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lc2u_3rem8lp
+
+.Lc2u_3cpy8lp:	mov	r3, r7, pull #24
+		ldmia	r1!, {r4 - r7}
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #8
+		mov	r4, r4, pull #24
+		orr	r4, r4, r5, push #8
+		mov	r5, r5, pull #24
+		orr	r5, r5, r6, push #8
+		mov	r6, r6, pull #24
+		orr	r6, r6, r7, push #8
+		stmia	r0!, {r3 - r6}			@ Shouldnt fault
+		bpl	.Lc2u_3cpy8lp
+
+.Lc2u_3rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #24
+		ldmneia	r1!, {r4, r7}
+		orrne	r3, r3, r4, push #8
+		movne	r4, r4, pull #24
+		orrne	r4, r4, r7, push #8
+		stmneia	r0!, {r3 - r4}			@ Shouldnt fault
+		tst	ip, #4
+		movne	r3, r7, pull #24
+		ldrne	r7, [r1], #4
+		orrne	r3, r3, r7, push #8
+	TUSER(	strne) r3, [r0], #4			@ Shouldnt fault
+		ands	ip, ip, #3
+		beq	.Lc2u_3fupi
+.Lc2u_3nowords:	mov	r3, r7, get_byte_3
+		teq	ip, #0
+		beq	.Lc2u_finished
+		cmp	ip, #2
+USER(	TUSER(	strb)	r3, [r0], #1)			@ May fault
+		ldrgeb	r3, [r1], #1
+USER(	TUSER(	strgeb) r3, [r0], #1)			@ May fault
+		ldrgtb	r3, [r1], #0
+USER(	TUSER(	strgtb) r3, [r0], #1)			@ May fault
+		b	.Lc2u_finished
+ENDPROC(__copy_to_user)
+
+		.pushsection .fixup,"ax"
+		.align	0
+9001:		ldmfd	sp!, {r0, r4 - r7, pc}
+		.popsection
+
+/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n);
+ * Purpose  : copy a block from user memory to kernel memory
+ * Params   : to   - kernel memory
+ *          : from - user memory
+ *          : n    - number of bytes to copy
+ * Returns  : Number of bytes NOT copied.
+ */
+.Lcfu_dest_not_aligned:
+		rsb	ip, ip, #4
+		cmp	ip, #2
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
+		strb	r3, [r0], #1
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
+		strgeb	r3, [r0], #1
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
+		strgtb	r3, [r0], #1
+		sub	r2, r2, ip
+		b	.Lcfu_dest_aligned
+
+ENTRY(__copy_from_user)
+		stmfd	sp!, {r0, r2, r4 - r7, lr}
+		cmp	r2, #4
+		blt	.Lcfu_not_enough
+		ands	ip, r0, #3
+		bne	.Lcfu_dest_not_aligned
+.Lcfu_dest_aligned:
+		ands	ip, r1, #3
+		bne	.Lcfu_src_not_aligned
+
+/*
+ * Seeing as there has to be at least 8 bytes to copy, we can
+ * copy one word, and force a user-mode page fault...
+ */
+
+.Lcfu_0fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lcfu_0nowords
+USER(	TUSER(	ldr)	r3, [r1], #4)
+		str	r3, [r0], #4
+		mov	ip, r1, lsl #32 - PAGE_SHIFT	@ On each page, use a ld/st??t instruction
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lcfu_0fupi
+/*
+ * ip = max no. of bytes to copy before needing another "strt" insn
+ */
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #32
+		blt	.Lcfu_0rem8lp
+
+.Lcfu_0cpy8lp:	ldmia	r1!, {r3 - r6}			@ Shouldnt fault
+		stmia	r0!, {r3 - r6}
+		ldmia	r1!, {r3 - r6}			@ Shouldnt fault
+		subs	ip, ip, #32
+		stmia	r0!, {r3 - r6}
+		bpl	.Lcfu_0cpy8lp
+
+.Lcfu_0rem8lp:	cmn	ip, #16
+		ldmgeia	r1!, {r3 - r6}			@ Shouldnt fault
+		stmgeia	r0!, {r3 - r6}
+		tst	ip, #8
+		ldmneia	r1!, {r3 - r4}			@ Shouldnt fault
+		stmneia	r0!, {r3 - r4}
+		tst	ip, #4
+	TUSER(	ldrne) r3, [r1], #4			@ Shouldnt fault
+		strne	r3, [r0], #4
+		ands	ip, ip, #3
+		beq	.Lcfu_0fupi
+.Lcfu_0nowords:	teq	ip, #0
+		beq	.Lcfu_finished
+.Lcfu_nowords:	cmp	ip, #2
+USER(	TUSER(	ldrb)	r3, [r1], #1)			@ May fault
+		strb	r3, [r0], #1
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
+		strgeb	r3, [r0], #1
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
+		strgtb	r3, [r0], #1
+		b	.Lcfu_finished
+
+.Lcfu_not_enough:
+		movs	ip, r2
+		bne	.Lcfu_nowords
+.Lcfu_finished:	mov	r0, #0
+		add	sp, sp, #8
+		ldmfd	sp!, {r4 - r7, pc}
+
+.Lcfu_src_not_aligned:
+		bic	r1, r1, #3
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
+		cmp	ip, #2
+		bgt	.Lcfu_3fupi
+		beq	.Lcfu_2fupi
+.Lcfu_1fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lcfu_1nowords
+		mov	r3, r7, pull #8
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
+		orr	r3, r3, r7, push #24
+		str	r3, [r0], #4
+		mov	ip, r1, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lcfu_1fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lcfu_1rem8lp
+
+.Lcfu_1cpy8lp:	mov	r3, r7, pull #8
+		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #24
+		mov	r4, r4, pull #8
+		orr	r4, r4, r5, push #24
+		mov	r5, r5, pull #8
+		orr	r5, r5, r6, push #24
+		mov	r6, r6, pull #8
+		orr	r6, r6, r7, push #24
+		stmia	r0!, {r3 - r6}
+		bpl	.Lcfu_1cpy8lp
+
+.Lcfu_1rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #8
+		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
+		orrne	r3, r3, r4, push #24
+		movne	r4, r4, pull #8
+		orrne	r4, r4, r7, push #24
+		stmneia	r0!, {r3 - r4}
+		tst	ip, #4
+		movne	r3, r7, pull #8
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
+		orrne	r3, r3, r7, push #24
+		strne	r3, [r0], #4
+		ands	ip, ip, #3
+		beq	.Lcfu_1fupi
+.Lcfu_1nowords:	mov	r3, r7, get_byte_1
+		teq	ip, #0
+		beq	.Lcfu_finished
+		cmp	ip, #2
+		strb	r3, [r0], #1
+		movge	r3, r7, get_byte_2
+		strgeb	r3, [r0], #1
+		movgt	r3, r7, get_byte_3
+		strgtb	r3, [r0], #1
+		b	.Lcfu_finished
+
+.Lcfu_2fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lcfu_2nowords
+		mov	r3, r7, pull #16
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
+		orr	r3, r3, r7, push #16
+		str	r3, [r0], #4
+		mov	ip, r1, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lcfu_2fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lcfu_2rem8lp
+
+
+.Lcfu_2cpy8lp:	mov	r3, r7, pull #16
+		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
+		subs	ip, ip, #16
+		orr	r3, r3, r4, push #16
+		mov	r4, r4, pull #16
+		orr	r4, r4, r5, push #16
+		mov	r5, r5, pull #16
+		orr	r5, r5, r6, push #16
+		mov	r6, r6, pull #16
+		orr	r6, r6, r7, push #16
+		stmia	r0!, {r3 - r6}
+		bpl	.Lcfu_2cpy8lp
+
+.Lcfu_2rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #16
+		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
+		orrne	r3, r3, r4, push #16
+		movne	r4, r4, pull #16
+		orrne	r4, r4, r7, push #16
+		stmneia	r0!, {r3 - r4}
+		tst	ip, #4
+		movne	r3, r7, pull #16
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
+		orrne	r3, r3, r7, push #16
+		strne	r3, [r0], #4
+		ands	ip, ip, #3
+		beq	.Lcfu_2fupi
+.Lcfu_2nowords:	mov	r3, r7, get_byte_2
+		teq	ip, #0
+		beq	.Lcfu_finished
+		cmp	ip, #2
+		strb	r3, [r0], #1
+		movge	r3, r7, get_byte_3
+		strgeb	r3, [r0], #1
+USER(	TUSER(	ldrgtb) r3, [r1], #0)			@ May fault
+		strgtb	r3, [r0], #1
+		b	.Lcfu_finished
+
+.Lcfu_3fupi:	subs	r2, r2, #4
+		addmi	ip, r2, #4
+		bmi	.Lcfu_3nowords
+		mov	r3, r7, pull #24
+USER(	TUSER(	ldr)	r7, [r1], #4)			@ May fault
+		orr	r3, r3, r7, push #8
+		str	r3, [r0], #4
+		mov	ip, r1, lsl #32 - PAGE_SHIFT
+		rsb	ip, ip, #0
+		movs	ip, ip, lsr #32 - PAGE_SHIFT
+		beq	.Lcfu_3fupi
+		cmp	r2, ip
+		movlt	ip, r2
+		sub	r2, r2, ip
+		subs	ip, ip, #16
+		blt	.Lcfu_3rem8lp
+
+.Lcfu_3cpy8lp:	mov	r3, r7, pull #24
+		ldmia	r1!, {r4 - r7}			@ Shouldnt fault
+		orr	r3, r3, r4, push #8
+		mov	r4, r4, pull #24
+		orr	r4, r4, r5, push #8
+		mov	r5, r5, pull #24
+		orr	r5, r5, r6, push #8
+		mov	r6, r6, pull #24
+		orr	r6, r6, r7, push #8
+		stmia	r0!, {r3 - r6}
+		subs	ip, ip, #16
+		bpl	.Lcfu_3cpy8lp
+
+.Lcfu_3rem8lp:	tst	ip, #8
+		movne	r3, r7, pull #24
+		ldmneia	r1!, {r4, r7}			@ Shouldnt fault
+		orrne	r3, r3, r4, push #8
+		movne	r4, r4, pull #24
+		orrne	r4, r4, r7, push #8
+		stmneia	r0!, {r3 - r4}
+		tst	ip, #4
+		movne	r3, r7, pull #24
+USER(	TUSER(	ldrne) r7, [r1], #4)			@ May fault
+		orrne	r3, r3, r7, push #8
+		strne	r3, [r0], #4
+		ands	ip, ip, #3
+		beq	.Lcfu_3fupi
+.Lcfu_3nowords:	mov	r3, r7, get_byte_3
+		teq	ip, #0
+		beq	.Lcfu_finished
+		cmp	ip, #2
+		strb	r3, [r0], #1
+USER(	TUSER(	ldrgeb) r3, [r1], #1)			@ May fault
+		strgeb	r3, [r0], #1
+USER(	TUSER(	ldrgtb) r3, [r1], #1)			@ May fault
+		strgtb	r3, [r0], #1
+		b	.Lcfu_finished
+ENDPROC(__copy_from_user)
+
+		.pushsection .fixup,"ax"
+		.align	0
+		/*
+		 * We took an exception.  r0 contains a pointer to
+		 * the byte not copied.
+		 */
+9001:		ldr	r2, [sp], #4			@ void *to
+		sub	r2, r0, r2			@ bytes copied
+		ldr	r1, [sp], #4			@ unsigned long count
+		subs	r4, r1, r2			@ bytes left to copy
+		movne	r1, r4
+		blne	__memzero
+		mov	r0, r4
+		ldmfd	sp!, {r4 - r7, pc}
+		.popsection
+
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 5de69f2fcca9..f6b9fc70161b 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -162,38 +162,6 @@ static void __init davinci_ntosd2_map_io(void)
 	dm644x_init();
 }
 
-/*
- I2C initialization
-*/
-static struct davinci_i2c_platform_data ntosd2_i2c_pdata = {
-	.bus_freq	= 20 /* kHz */,
-	.bus_delay	= 100 /* usec */,
-};
-
-static struct i2c_board_info __initdata ntosd2_i2c_info[] =  {
-};
-
-static	int ntosd2_init_i2c(void)
-{
-	int	status;
-
-	davinci_init_i2c(&ntosd2_i2c_pdata);
-	status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type);
-	if (status == 0) {
-		status = gpio_direction_input(NTOSD2_MSP430_IRQ);
-		if (status == 0) {
-			status = gpio_to_irq(NTOSD2_MSP430_IRQ);
-			if (status > 0) {
-				ntosd2_i2c_info[0].irq = status;
-				i2c_register_board_info(1,
-					ntosd2_i2c_info,
-					ARRAY_SIZE(ntosd2_i2c_info));
-			}
-		}
-	}
-	return status;
-}
-
 static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
 	.wires		= 4,
 	.version	= MMC_CTLR_VERSION_1
@@ -218,7 +186,6 @@ static __init void davinci_ntosd2_init(void)
 {
 	struct clk *aemif_clk;
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
-	int	status;
 
 	aemif_clk = clk_get(NULL, "aemif");
 	clk_enable(aemif_clk);
@@ -242,12 +209,6 @@ static __init void davinci_ntosd2_init(void)
 	platform_add_devices(davinci_ntosd2_devices,
 				ARRAY_SIZE(davinci_ntosd2_devices));
 
-	/* Initialize I2C interface specific for this board */
-	status = ntosd2_init_i2c();
-	if (status < 0)
-		pr_warning("davinci_ntosd2_init: msp430 irq setup failed:"
-						"	 %d\n", status);
-
 	davinci_serial_init(&uart_config);
 	dm644x_init_asp(&dm644x_ntosd2_snd_data);
 
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index 4db5de54b6a7..6321567d8eaa 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -102,7 +102,8 @@ void __init dove_ehci1_init(void)
 void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE,
-			IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR);
+			IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR,
+			1600);
 }
 
 /*****************************************************************************
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 5ca80307d6d7..4e574c24581c 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -42,6 +42,7 @@
 #include <plat/backlight.h>
 #include <plat/fb.h>
 #include <plat/mfc.h>
+#include <plat/hdmi.h>
 
 #include <mach/ohci.h>
 #include <mach/map.h>
@@ -734,6 +735,11 @@ static void __init origen_bt_setup(void)
 	s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
 }
 
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* Direct HPD to HDMI chip */
@@ -781,6 +787,7 @@ static void __init origen_machine_init(void)
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
+	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 
 #ifdef CONFIG_DRM_EXYNOS
 	s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
index 3cfa688d274a..73f2bce097e1 100644
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ b/arch/arm/mach-exynos/mach-smdkv310.c
@@ -40,6 +40,7 @@
 #include <plat/mfc.h>
 #include <plat/ehci.h>
 #include <plat/clock.h>
+#include <plat/hdmi.h>
 
 #include <mach/map.h>
 #include <mach/ohci.h>
@@ -354,6 +355,11 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = {
 	.pwm_period_ns  = 1000,
 };
 
+/* I2C module and id for HDMIPHY */
+static struct i2c_board_info hdmiphy_info = {
+	I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
+};
+
 static void s5p_tv_setup(void)
 {
 	/* direct HPD to HDMI chip */
@@ -388,6 +394,7 @@ static void __init smdkv310_machine_init(void)
 
 	s5p_tv_setup();
 	s5p_i2c_hdmiphy_set_platdata(NULL);
+	s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
 
 	samsung_keypad_set_platdata(&smdkv310_keypad_data);
 
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 373c3c00d24c..c0bc83a7663e 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -115,7 +115,7 @@ static __init int exynos_pm_dt_parse_domains(void)
 }
 #endif /* CONFIG_OF */
 
-static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
+static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
 						struct exynos_pm_domain *pd)
 {
 	if (pdev->dev.bus) {
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 07f7c226e4cf..d004d37ad9d8 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -9,7 +9,8 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o
 obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+imx5-pm-$(CONFIG_PM) += pm-imx5.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o
@@ -70,14 +71,13 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o
 obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
 obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
 obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-obj-$(CONFIG_CPU_V7) += head-v7.o
-AFLAGS_head-v7.o :=-Wa,-march=armv7-a
-obj-$(CONFIG_SMP) += platsmp.o
+AFLAGS_headsmp.o :=-Wa,-march=armv7-a
+obj-$(CONFIG_SMP) += headsmp.o platsmp.o
 obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
 obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o
 
 ifeq ($(CONFIG_PM),y)
-obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
+obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o
 endif
 
 # i.MX5 based machines
diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c
index 7aa6313fb167..f69ca4680049 100644
--- a/arch/arm/mach-imx/clk-imx27.c
+++ b/arch/arm/mach-imx/clk-imx27.c
@@ -223,7 +223,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[per3_gate], "per", "imx-fb.0");
 	clk_register_clkdev(clk[lcdc_ipg_gate], "ipg", "imx-fb.0");
 	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx-fb.0");
-	clk_register_clkdev(clk[csi_ahb_gate], NULL, "mx2-camera.0");
+	clk_register_clkdev(clk[csi_ahb_gate], "ahb", "mx2-camera.0");
 	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
 	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
 	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
@@ -250,8 +250,10 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[i2c2_ipg_gate], NULL, "imx-i2c.1");
 	clk_register_clkdev(clk[owire_ipg_gate], NULL, "mxc_w1.0");
 	clk_register_clkdev(clk[kpp_ipg_gate], NULL, "imx-keypad");
-	clk_register_clkdev(clk[emma_ahb_gate], "ahb", "imx-emma");
-	clk_register_clkdev(clk[emma_ipg_gate], "ipg", "imx-emma");
+	clk_register_clkdev(clk[emma_ahb_gate], "emma-ahb", "mx2-camera.0");
+	clk_register_clkdev(clk[emma_ipg_gate], "emma-ipg", "mx2-camera.0");
+	clk_register_clkdev(clk[emma_ahb_gate], "ahb", "m2m-emmaprp.0");
+	clk_register_clkdev(clk[emma_ipg_gate], "ipg", "m2m-emmaprp.0");
 	clk_register_clkdev(clk[iim_ipg_gate], "iim", NULL);
 	clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL);
 	clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL);
diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c
index 8e19e70f90f9..1253af2d9971 100644
--- a/arch/arm/mach-imx/clk-imx31.c
+++ b/arch/arm/mach-imx/clk-imx31.c
@@ -130,7 +130,7 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0");
 	clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core");
 	clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb");
-	clk_register_clkdev(clk[kpp_gate], "kpp", NULL);
+	clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad");
 	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.0");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.0");
diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c
index f6086693ebd2..4bdcaa97bd98 100644
--- a/arch/arm/mach-imx/clk-imx51-imx53.c
+++ b/arch/arm/mach-imx/clk-imx51-imx53.c
@@ -303,6 +303,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_prepare_enable(clk[aips_tz2]); /* fec */
 	clk_prepare_enable(clk[spba]);
 	clk_prepare_enable(clk[emi_fast_gate]); /* fec */
+	clk_prepare_enable(clk[emi_slow_gate]); /* eim */
 	clk_prepare_enable(clk[tmax1]);
 	clk_prepare_enable(clk[tmax2]); /* esdhc2, fec */
 	clk_prepare_enable(clk[tmax3]); /* esdhc1, esdhc4 */
diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c
index ea89520b6e22..4233d9e3531d 100644
--- a/arch/arm/mach-imx/clk-imx6q.c
+++ b/arch/arm/mach-imx/clk-imx6q.c
@@ -152,7 +152,7 @@ enum mx6q_clks {
 	ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
 	usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
 	pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
-	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2,
+	ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5,
 	clk_max
 };
 
@@ -288,8 +288,10 @@ int __init mx6q_clocks_init(void)
 	clk[gpu3d_shader]     = imx_clk_divider("gpu3d_shader",     "gpu3d_shader_sel",  base + 0x18, 29, 3);
 	clk[ipu1_podf]        = imx_clk_divider("ipu1_podf",        "ipu1_sel",          base + 0x3c, 11, 3);
 	clk[ipu2_podf]        = imx_clk_divider("ipu2_podf",        "ipu2_sel",          base + 0x3c, 16, 3);
-	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_sel",       base + 0x20, 10, 1);
-	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_sel",       base + 0x20, 11, 1);
+	clk[ldb_di0_div_3_5]  = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7);
+	clk[ldb_di0_podf]     = imx_clk_divider("ldb_di0_podf",     "ldb_di0_div_3_5",       base + 0x20, 10, 1);
+	clk[ldb_di1_div_3_5]  = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7);
+	clk[ldb_di1_podf]     = imx_clk_divider("ldb_di1_podf",     "ldb_di1_div_3_5",   base + 0x20, 11, 1);
 	clk[ipu1_di0_pre]     = imx_clk_divider("ipu1_di0_pre",     "ipu1_di0_pre_sel",  base + 0x34, 3,  3);
 	clk[ipu1_di1_pre]     = imx_clk_divider("ipu1_di1_pre",     "ipu1_di1_pre_sel",  base + 0x34, 12, 3);
 	clk[ipu2_di0_pre]     = imx_clk_divider("ipu2_di0_pre",     "ipu2_di0_pre_sel",  base + 0x38, 3,  3);
diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S
index 7e49deb128a4..7e49deb128a4 100644
--- a/arch/arm/mach-imx/head-v7.S
+++ b/arch/arm/mach-imx/headsmp.S
diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c
index 20ed2d56c1af..f8f7437c83b8 100644
--- a/arch/arm/mach-imx/hotplug.c
+++ b/arch/arm/mach-imx/hotplug.c
@@ -42,22 +42,6 @@ static inline void cpu_enter_lowpower(void)
 	  : "cc");
 }
 
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-		"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C), "Ir" (0x40)
-	  : "cc");
-}
-
 /*
  * platform-specific code to shutdown a CPU
  *
@@ -67,11 +51,10 @@ void platform_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
 	imx_enable_cpu(cpu, false);
-	cpu_do_idle();
-	cpu_leave_lowpower();
 
-	/* We should never return from idle */
-	panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+	/* spin here until hardware takes it down */
+	while (1)
+		;
 }
 
 int platform_cpu_disable(unsigned int cpu)
diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c
index 5ec0608f2a76..045b3f6a387d 100644
--- a/arch/arm/mach-imx/mach-imx6q.c
+++ b/arch/arm/mach-imx/mach-imx6q.c
@@ -71,7 +71,7 @@ soft:
 /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */
 static int ksz9021rn_phy_fixup(struct phy_device *phydev)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB)) {
+	if (IS_BUILTIN(CONFIG_PHYLIB)) {
 		/* min rx data delay */
 		phy_write(phydev, 0x0b, 0x8105);
 		phy_write(phydev, 0x0c, 0x0000);
@@ -112,7 +112,7 @@ put_clk:
 
 static void __init imx6q_sabrelite_init(void)
 {
-	if (IS_ENABLED(CONFIG_PHYLIB))
+	if (IS_BUILTIN(CONFIG_PHYLIB))
 		phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK,
 				ksz9021rn_phy_fixup);
 	imx6q_sabrelite_cko1_setup();
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index ebf680bebdf2..3fa6c51390da 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -11,6 +11,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c
index 7b1055c8e0b9..3b2267529f5e 100644
--- a/arch/arm/mach-integrator/integrator_ap.c
+++ b/arch/arm/mach-integrator/integrator_ap.c
@@ -456,7 +456,7 @@ static void __init ap_init_timer(void)
 
 	clk = clk_get_sys("ap_timer", NULL);
 	BUG_ON(IS_ERR(clk));
-	clk_enable(clk);
+	clk_prepare_enable(clk);
 	rate = clk_get_rate(clk);
 
 	writel(0, TIMER0_VA_BASE + TIMER_CTRL);
diff --git a/arch/arm/mach-kirkwood/Makefile.boot b/arch/arm/mach-kirkwood/Makefile.boot
index 2a576abf409b..a13299d758e1 100644
--- a/arch/arm/mach-kirkwood/Makefile.boot
+++ b/arch/arm/mach-kirkwood/Makefile.boot
@@ -7,7 +7,8 @@ dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
 dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
 dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
 dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
-dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-qnap-ts219.dtb
+dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6281.dtb
+dtb-$(CONFIG_MACH_TS219_DT)	+= kirkwood-ts219-6282.dtb
 dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
-dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
-dbt-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
+dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
+dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index c4b64adcbfce..3226077735b1 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -301,7 +301,7 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
-			IRQ_KIRKWOOD_GE00_ERR);
+			IRQ_KIRKWOOD_GE00_ERR, 1600);
 	/* The interface forgets the MAC address assigned by u-boot if
 	the clock is turned off, so claim the clk now. */
 	clk_prepare_enable(ge0);
@@ -315,7 +315,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
-			IRQ_KIRKWOOD_GE01_ERR);
+			IRQ_KIRKWOOD_GE01_ERR, 1600);
 	clk_prepare_enable(ge1);
 }
 
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c
index 4304f9519372..7e8a5a2e1ec7 100644
--- a/arch/arm/mach-mmp/sram.c
+++ b/arch/arm/mach-mmp/sram.c
@@ -68,7 +68,7 @@ static int __devinit sram_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret = 0;
 
-	if (!pdata && !pdata->pool_name)
+	if (!pdata || !pdata->pool_name)
 		return -ENODEV;
 
 	info = kzalloc(sizeof(*info), GFP_KERNEL);
diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c
index 62b53d710efd..a9bc84180d21 100644
--- a/arch/arm/mach-mv78xx0/addr-map.c
+++ b/arch/arm/mach-mv78xx0/addr-map.c
@@ -37,7 +37,7 @@
 #define WIN0_OFF(n)		(BRIDGE_VIRT_BASE + 0x0000 + ((n) << 4))
 #define WIN8_OFF(n)		(BRIDGE_VIRT_BASE + 0x0900 + (((n) - 8) << 4))
 
-static void __init __iomem *win_cfg_base(int win)
+static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, int win)
 {
 	/*
 	 * Find the control register base address for this window.
diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c
index b4c53b846c9c..3057f7d4329a 100644
--- a/arch/arm/mach-mv78xx0/common.c
+++ b/arch/arm/mach-mv78xx0/common.c
@@ -213,7 +213,8 @@ void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			GE00_PHYS_BASE, IRQ_MV78XX0_GE00_SUM,
-			IRQ_MV78XX0_GE_ERR);
+			IRQ_MV78XX0_GE_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
@@ -224,7 +225,8 @@ void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge01_init(eth_data,
 			GE01_PHYS_BASE, IRQ_MV78XX0_GE01_SUM,
-			NO_IRQ);
+			NO_IRQ,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index ccdf83b17cf1..9a8bbda195b2 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -2,9 +2,6 @@ if ARCH_MXS
 
 source "arch/arm/mach-mxs/devices/Kconfig"
 
-config MXS_OCOTP
-	bool
-
 config SOC_IMX23
 	bool
 	select ARM_AMBA
@@ -66,7 +63,6 @@ config MACH_MX28EVK
 	select MXS_HAVE_PLATFORM_MXS_SAIF
 	select MXS_HAVE_PLATFORM_MXS_I2C
 	select MXS_HAVE_PLATFORM_RTC_STMP3XXX
-	select MXS_OCOTP
 	help
 	  Include support for MX28EVK platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -94,7 +90,6 @@ config MODULE_M28
 	select MXS_HAVE_PLATFORM_MXS_I2C
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXSFB
-	select MXS_OCOTP
 
 config MODULE_APX4
 	bool
@@ -106,7 +101,6 @@ config MODULE_APX4
 	select MXS_HAVE_PLATFORM_MXS_I2C
 	select MXS_HAVE_PLATFORM_MXS_MMC
 	select MXS_HAVE_PLATFORM_MXS_SAIF
-	select MXS_OCOTP
 
 config MACH_TX28
 	bool "Ka-Ro TX28 module"
diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile
index e41590ccb437..fed3695a1339 100644
--- a/arch/arm/mach-mxs/Makefile
+++ b/arch/arm/mach-mxs/Makefile
@@ -1,7 +1,6 @@
 # Common support
-obj-y := devices.o icoll.o iomux.o system.o timer.o mm.o
+obj-y := devices.o icoll.o iomux.o ocotp.o system.o timer.o mm.o
 
-obj-$(CONFIG_MXS_OCOTP) += ocotp.o
 obj-$(CONFIG_PM) += pm.o
 
 obj-$(CONFIG_MACH_MXS_DT) += mach-mxs.o
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index dd2db025f778..fcd4e85c4ddc 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -62,13 +62,14 @@ config ARCH_OMAP4
 	select PM_OPP if PM
 	select USB_ARCH_HAS_EHCI if USB_SUPPORT
 	select ARM_CPU_SUSPEND if PM
-	select ARCH_NEEDS_CPU_IDLE_COUPLED
+	select ARCH_NEEDS_CPU_IDLE_COUPLED if SMP
 
 config SOC_OMAP5
 	bool "TI OMAP5"
 	select CPU_V7
 	select ARM_GIC
 	select HAVE_SMP
+	select ARM_CPU_SUSPEND if PM
 
 comment "OMAP Core Type"
 	depends on ARCH_OMAP2
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 293fc9c2bea9..3613d1493c84 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -554,6 +554,8 @@ static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = {
 
 #ifdef CONFIG_OMAP_MUX
 static struct omap_board_mux board_mux[] __initdata = {
+	/* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */
+	OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 #endif
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 46e6ecad5696..164570053f71 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -58,6 +58,7 @@
 #include "hsmmc.h"
 #include "common-board-devices.h"
 
+#define OMAP3_EVM_TS_GPIO	175
 #define OMAP3_EVM_EHCI_VBUS	22
 #define OMAP3_EVM_EHCI_SELECT	61
 
diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index 14734746457c..c1875862679f 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -35,16 +35,6 @@ static struct omap2_mcspi_device_config ads7846_mcspi_config = {
 	.turbo_mode	= 0,
 };
 
-/*
- * ADS7846 driver maybe request a gpio according to the value
- * of pdata->get_pendown_state, but we have done this. So set
- * get_pendown_state to avoid twice gpio requesting.
- */
-static int omap3_get_pendown_state(void)
-{
-	return !gpio_get_value(OMAP3_EVM_TS_GPIO);
-}
-
 static struct ads7846_platform_data ads7846_config = {
 	.x_max			= 0x0fff,
 	.y_max			= 0x0fff,
@@ -55,7 +45,6 @@ static struct ads7846_platform_data ads7846_config = {
 	.debounce_rep		= 1,
 	.gpio_pendown		= -EINVAL,
 	.keep_vref_on		= 1,
-	.get_pendown_state	= &omap3_get_pendown_state,
 };
 
 static struct spi_board_info ads7846_spi_board_info __initdata = {
diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h
index 4c4ef6a6166b..a0b4a42836ab 100644
--- a/arch/arm/mach-omap2/common-board-devices.h
+++ b/arch/arm/mach-omap2/common-board-devices.h
@@ -4,7 +4,6 @@
 #include "twl-common.h"
 
 #define NAND_BLOCK_SIZE	SZ_128K
-#define OMAP3_EVM_TS_GPIO	175
 
 struct mtd_partition;
 struct ads7846_platform_data;
diff --git a/arch/arm/mach-omap2/cpuidle44xx.c b/arch/arm/mach-omap2/cpuidle44xx.c
index ee05e193fc61..288bee6cbb76 100644
--- a/arch/arm/mach-omap2/cpuidle44xx.c
+++ b/arch/arm/mach-omap2/cpuidle44xx.c
@@ -238,8 +238,9 @@ int __init omap4_idle_init(void)
 	for_each_cpu(cpu_id, cpu_online_mask) {
 		dev = &per_cpu(omap4_idle_dev, cpu_id);
 		dev->cpu = cpu_id;
+#ifdef CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED
 		dev->coupled_cpus = *cpu_online_mask;
-
+#endif
 		cpuidle_register_driver(&omap4_idle_driver);
 
 		if (cpuidle_register_device(dev)) {
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
index 471e62a74a16..76f9b3c2f586 100644
--- a/arch/arm/mach-omap2/mux.h
+++ b/arch/arm/mach-omap2/mux.h
@@ -127,7 +127,6 @@ struct omap_mux_partition {
  * @gpio:	GPIO number
  * @muxnames:	available signal modes for a ball
  * @balls:	available balls on the package
- * @partition:	mux partition
  */
 struct omap_mux {
 	u16	reg_offset;
diff --git a/arch/arm/mach-omap2/opp4xxx_data.c b/arch/arm/mach-omap2/opp4xxx_data.c
index 2293ba27101b..c95415da23c2 100644
--- a/arch/arm/mach-omap2/opp4xxx_data.c
+++ b/arch/arm/mach-omap2/opp4xxx_data.c
@@ -94,7 +94,7 @@ int __init omap4_opp_init(void)
 {
 	int r = -ENODEV;
 
-	if (!cpu_is_omap44xx())
+	if (!cpu_is_omap443x())
 		return r;
 
 	r = omap_init_opp_table(omap44xx_opp_def_list,
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index e4fc88c65dbd..05bd8f02723f 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -272,21 +272,16 @@ void omap_sram_idle(void)
 	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
 	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
 
-	if (mpu_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(mpu_pwrdm);
-		pwrdm_pre_transition(neon_pwrdm);
-	}
+	pwrdm_pre_transition(NULL);
 
 	/* PER */
 	if (per_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(per_pwrdm);
 		per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0;
 		omap2_gpio_prepare_for_idle(per_going_off);
 	}
 
 	/* CORE */
 	if (core_next_state < PWRDM_POWER_ON) {
-		pwrdm_pre_transition(core_pwrdm);
 		if (core_next_state == PWRDM_POWER_OFF) {
 			omap3_core_save_context();
 			omap3_cm_save_context();
@@ -339,20 +334,14 @@ void omap_sram_idle(void)
 			omap2_prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF_MASK,
 					       OMAP3430_GR_MOD,
 					       OMAP3_PRM_VOLTCTRL_OFFSET);
-		pwrdm_post_transition(core_pwrdm);
 	}
 	omap3_intc_resume_idle();
 
+	pwrdm_post_transition(NULL);
+
 	/* PER */
-	if (per_next_state < PWRDM_POWER_ON) {
+	if (per_next_state < PWRDM_POWER_ON)
 		omap2_gpio_resume_after_idle();
-		pwrdm_post_transition(per_pwrdm);
-	}
-
-	if (mpu_next_state < PWRDM_POWER_ON) {
-		pwrdm_post_transition(mpu_pwrdm);
-		pwrdm_post_transition(neon_pwrdm);
-	}
 }
 
 static void omap3_pm_idle(void)
diff --git a/arch/arm/mach-omap2/sleep44xx.S b/arch/arm/mach-omap2/sleep44xx.S
index 9f6b83d1b193..91e71d8f46f0 100644
--- a/arch/arm/mach-omap2/sleep44xx.S
+++ b/arch/arm/mach-omap2/sleep44xx.S
@@ -56,9 +56,13 @@ ppa_por_params:
  * The restore function pointer is stored at CPUx_WAKEUP_NS_PA_ADDR_OFFSET.
  * It returns to the caller for CPU INACTIVE and ON power states or in case
  * CPU failed to transition to targeted OFF/DORMANT state.
+ *
+ * omap4_finish_suspend() calls v7_flush_dcache_all() which doesn't save
+ * stack frame and it expects the caller to take care of it. Hence the entire
+ * stack frame is saved to avoid possible stack corruption.
  */
 ENTRY(omap4_finish_suspend)
-	stmfd	sp!, {lr}
+	stmfd	sp!, {r4-r12, lr}
 	cmp	r0, #0x0
 	beq	do_WFI				@ No lowpower state, jump to WFI
 
@@ -226,7 +230,7 @@ scu_gp_clear:
 skip_scu_gp_clear:
 	isb
 	dsb
-	ldmfd	sp!, {pc}
+	ldmfd	sp!, {r4-r12, pc}
 ENDPROC(omap4_finish_suspend)
 
 /*
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 5d142facb0e6..bd81bf40e711 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -67,6 +67,7 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)
 {
+	omap_mux_init_signal("sys_nirq", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE);
 	strncpy(pmic_i2c_board_info.type, pmic_type,
 		sizeof(pmic_i2c_board_info.type));
 	pmic_i2c_board_info.irq = pmic_irq;
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
index 9148b229d0de..410291c67666 100644
--- a/arch/arm/mach-orion5x/common.c
+++ b/arch/arm/mach-orion5x/common.c
@@ -109,7 +109,8 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 {
 	orion_ge00_init(eth_data,
 			ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
-			IRQ_ORION5X_ETH_ERR);
+			IRQ_ORION5X_ETH_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
 }
 
 
diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
index 5905ed130e94..d89d87ae144c 100644
--- a/arch/arm/mach-pxa/raumfeld.c
+++ b/arch/arm/mach-pxa/raumfeld.c
@@ -953,12 +953,12 @@ static struct i2c_board_info raumfeld_connector_i2c_board_info __initdata = {
 
 static struct eeti_ts_platform_data eeti_ts_pdata = {
 	.irq_active_high = 1,
+	.irq_gpio = GPIO_TOUCH_IRQ,
 };
 
 static struct i2c_board_info raumfeld_controller_i2c_board_info __initdata = {
 	.type	= "eeti_ts",
 	.addr	= 0x0a,
-	.irq	= PXA_GPIO_TO_IRQ(GPIO_TOUCH_IRQ),
 	.platform_data = &eeti_ts_pdata,
 };
 
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index e24961109b70..d56b0f7f2b20 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -483,7 +483,7 @@ config MACH_NEO1973_GTA02
 	select I2C
 	select POWER_SUPPLY
 	select MACH_NEO1973
-	select S3C2410_PWM
+	select S3C24XX_PWM
 	select S3C_DEV_USB_HOST
 	help
 	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
@@ -493,7 +493,7 @@ config MACH_RX1950
 	select S3C24XX_DCLK
 	select PM_H1940 if PM
 	select I2C
-	select S3C2410_PWM
+	select S3C24XX_PWM
 	select S3C_DEV_NAND
 	select S3C2410_IOTIMING if S3C2440_CPUFREQ
 	select S3C2440_XTAL_16934400
diff --git a/arch/arm/mach-s3c24xx/include/mach/dma.h b/arch/arm/mach-s3c24xx/include/mach/dma.h
index 454831b66037..ee99fd56c043 100644
--- a/arch/arm/mach-s3c24xx/include/mach/dma.h
+++ b/arch/arm/mach-s3c24xx/include/mach/dma.h
@@ -24,7 +24,8 @@
 */
 
 enum dma_ch {
-	DMACH_XD0,
+	DMACH_DT_PROP = -1,	/* not yet supported, do not use */
+	DMACH_XD0 = 0,
 	DMACH_XD1,
 	DMACH_SDI,
 	DMACH_SPI0,
diff --git a/arch/arm/mach-sa1100/leds-hackkit.c b/arch/arm/mach-sa1100/leds-hackkit.c
index 6a2352436e62..f8e47235babe 100644
--- a/arch/arm/mach-sa1100/leds-hackkit.c
+++ b/arch/arm/mach-sa1100/leds-hackkit.c
@@ -10,6 +10,7 @@
  * as cpu led, the green one is used as timer led.
  */
 #include <linux/init.h>
+#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <asm/leds.h>
diff --git a/arch/arm/mach-tegra/board-harmony-power.c b/arch/arm/mach-tegra/board-harmony-power.c
index 8fd387bf31f0..b7344beec102 100644
--- a/arch/arm/mach-tegra/board-harmony-power.c
+++ b/arch/arm/mach-tegra/board-harmony-power.c
@@ -51,7 +51,7 @@ static struct regulator_init_data ldo0_data = {
 	.consumer_supplies = tps658621_ldo0_supply,
 };
 
-#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv)	\
+#define HARMONY_REGULATOR_INIT(_id, _name, _supply, _minmv, _maxmv, _on)\
 	static struct regulator_init_data _id##_data = {		\
 		.supply_regulator = _supply,				\
 		.constraints = {					\
@@ -63,21 +63,22 @@ static struct regulator_init_data ldo0_data = {
 			.valid_ops_mask = (REGULATOR_CHANGE_MODE |	\
 					   REGULATOR_CHANGE_STATUS |	\
 					   REGULATOR_CHANGE_VOLTAGE),	\
+			.always_on = _on,				\
 		},							\
 	}
 
-HARMONY_REGULATOR_INIT(sm0,  "vdd_sm0",  "vdd_sys", 725, 1500);
-HARMONY_REGULATOR_INIT(sm1,  "vdd_sm1",  "vdd_sys", 725, 1500);
-HARMONY_REGULATOR_INIT(sm2,  "vdd_sm2",  "vdd_sys", 3000, 4550);
-HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500);
-HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500);
-HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475);
-HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL,	    1250, 3300);
-HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300);
-HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300);
+HARMONY_REGULATOR_INIT(sm0,  "vdd_sm0",  "vdd_sys", 725, 1500, 1);
+HARMONY_REGULATOR_INIT(sm1,  "vdd_sm1",  "vdd_sys", 725, 1500, 1);
+HARMONY_REGULATOR_INIT(sm2,  "vdd_sm2",  "vdd_sys", 3000, 4550, 1);
+HARMONY_REGULATOR_INIT(ldo1, "vdd_ldo1", "vdd_sm2", 725, 1500, 1);
+HARMONY_REGULATOR_INIT(ldo2, "vdd_ldo2", "vdd_sm2", 725, 1500, 0);
+HARMONY_REGULATOR_INIT(ldo3, "vdd_ldo3", "vdd_sm2", 1250, 3300, 1);
+HARMONY_REGULATOR_INIT(ldo4, "vdd_ldo4", "vdd_sm2", 1700, 2475, 1);
+HARMONY_REGULATOR_INIT(ldo5, "vdd_ldo5", NULL,	    1250, 3300, 1);
+HARMONY_REGULATOR_INIT(ldo6, "vdd_ldo6", "vdd_sm2", 1250, 3300, 0);
+HARMONY_REGULATOR_INIT(ldo7, "vdd_ldo7", "vdd_sm2", 1250, 3300, 0);
+HARMONY_REGULATOR_INIT(ldo8, "vdd_ldo8", "vdd_sm2", 1250, 3300, 0);
+HARMONY_REGULATOR_INIT(ldo9, "vdd_ldo9", "vdd_sm2", 1250, 3300, 1);
 
 #define TPS_REG(_id, _data)			\
 	{					\
@@ -119,9 +120,10 @@ static struct i2c_board_info __initdata harmony_regulators[] = {
 
 int __init harmony_regulator_init(void)
 {
+	regulator_register_always_on(0, "vdd_sys",
+		NULL, 0, 5000000);
+
 	if (machine_is_harmony()) {
-		regulator_register_always_on(0, "vdd_sys",
-			NULL, 0, 5000000);
 		i2c_register_board_info(3, harmony_regulators, 1);
 	} else { /* Harmony, booted using device tree */
 		struct device_node *np;
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index c013bbf79cac..53d3d46dec12 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -41,7 +41,6 @@ config MACH_HREFV60
 config MACH_SNOWBALL
 	bool "U8500 Snowball platform"
 	select MACH_MOP500
-	select LEDS_GPIO
 	help
 	  Include support for the snowball development platform.
 
diff --git a/arch/arm/mach-ux500/board-mop500-msp.c b/arch/arm/mach-ux500/board-mop500-msp.c
index 996048038743..df15646036aa 100644
--- a/arch/arm/mach-ux500/board-mop500-msp.c
+++ b/arch/arm/mach-ux500/board-mop500-msp.c
@@ -191,9 +191,9 @@ static struct platform_device *db8500_add_msp_i2s(struct device *parent,
 	return pdev;
 }
 
-/* Platform device for ASoC U8500 machine */
-static struct platform_device snd_soc_u8500 = {
-		.name = "snd-soc-u8500",
+/* Platform device for ASoC MOP500 machine */
+static struct platform_device snd_soc_mop500 = {
+		.name = "snd-soc-mop500",
 		.id = 0,
 		.dev = {
 			.platform_data = NULL,
@@ -227,8 +227,8 @@ int mop500_msp_init(struct device *parent)
 {
 	struct platform_device *msp1;
 
-	pr_info("%s: Register platform-device 'snd-soc-u8500'.\n", __func__);
-	platform_device_register(&snd_soc_u8500);
+	pr_info("%s: Register platform-device 'snd-soc-mop500'.\n", __func__);
+	platform_device_register(&snd_soc_mop500);
 
 	pr_info("Initialize MSP I2S-devices.\n");
 	db8500_add_msp_i2s(parent, 0, U8500_MSP0_BASE, IRQ_DB8500_MSP0,
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
index 8674a890fd1c..a534d8880de1 100644
--- a/arch/arm/mach-ux500/board-mop500.c
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -797,6 +797,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		mop500_sdi_init(parent);
+		mop500_msp_init(parent);
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs);
 		i2c_register_board_info(2, mop500_i2c2_devices,
@@ -804,6 +805,8 @@ static void __init u8500_init_machine(void)
 
 		mop500_uib_init();
 
+	} else if (of_machine_is_compatible("calaosystems,snowball-a9500")) {
+		mop500_msp_init(parent);
 	} else if (of_machine_is_compatible("st-ericsson,hrefv60+")) {
 		/*
 		 * The HREFv60 board removed a GPIO expander and routed
@@ -815,6 +818,7 @@ static void __init u8500_init_machine(void)
 				ARRAY_SIZE(mop500_platform_devs));
 
 		hrefv60_sdi_init(parent);
+		mop500_msp_init(parent);
 
 		i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices);
 		i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES;
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index c2cdf6500f75..4e7d1182e8a3 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -358,7 +358,7 @@ void __init dma_contiguous_remap(void)
 		if (end > arm_lowmem_limit)
 			end = arm_lowmem_limit;
 		if (start >= end)
-			return;
+			continue;
 
 		map.pfn = __phys_to_pfn(start);
 		map.virtual = __phys_to_virt(start);
@@ -423,7 +423,7 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page)
 	unsigned int pageno;
 	unsigned long flags;
 	void *ptr = NULL;
-	size_t align;
+	unsigned long align_mask;
 
 	if (!pool->vaddr) {
 		WARN(1, "coherent pool not initialised!\n");
@@ -435,11 +435,11 @@ static void *__alloc_from_pool(size_t size, struct page **ret_page)
 	 * small, so align them to their order in pages, minimum is a page
 	 * size. This helps reduce fragmentation of the DMA space.
 	 */
-	align = PAGE_SIZE << get_order(size);
+	align_mask = (1 << get_order(size)) - 1;
 
 	spin_lock_irqsave(&pool->lock, flags);
 	pageno = bitmap_find_next_zero_area(pool->bitmap, pool->nr_pages,
-					    0, count, (1 << align) - 1);
+					    0, count, align_mask);
 	if (pageno < pool->nr_pages) {
 		bitmap_set(pool->bitmap, pageno, count);
 		ptr = pool->vaddr + PAGE_SIZE * pageno;
@@ -648,12 +648,12 @@ void arm_dma_free(struct device *dev, size_t size, void *cpu_addr,
 
 	if (arch_is_coherent() || nommu()) {
 		__dma_free_buffer(page, size);
+	} else if (__free_from_pool(cpu_addr, size)) {
+		return;
 	} else if (!IS_ENABLED(CONFIG_CMA)) {
 		__dma_free_remap(cpu_addr, size);
 		__dma_free_buffer(page, size);
 	} else {
-		if (__free_from_pool(cpu_addr, size))
-			return;
 		/*
 		 * Non-atomic allocations cannot be freed with IRQs disabled
 		 */
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 77458548e031..40ca11ed6e5f 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -231,8 +231,6 @@ void __sync_icache_dcache(pte_t pteval)
 	struct page *page;
 	struct address_space *mapping;
 
-	if (!pte_present_user(pteval))
-		return;
 	if (cache_is_vipt_nonaliasing() && !pte_exec(pteval))
 		/* only flush non-aliasing VIPT caches for exec mappings */
 		return;
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index c2021139cb56..ea94765acf9a 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -38,10 +38,10 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	dsb
 	mov	r0, r0, lsr #PAGE_SHIFT		@ align address
 	mov	r1, r1, lsr #PAGE_SHIFT
-#ifdef CONFIG_ARM_ERRATA_720789
-	mov	r3, #0
-#else
 	asid	r3, r3				@ mask ASID
+#ifdef CONFIG_ARM_ERRATA_720789
+	ALT_SMP(W(mov)	r3, #0	)
+	ALT_UP(W(nop)		)
 #endif
 	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
 	mov	r1, r1, lsl #PAGE_SHIFT
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index 626ad8cad7a9..938b50a33439 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -189,6 +189,7 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 		timer->reserved = 1;
 		break;
 	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (timer) {
 		ret = omap_dm_timer_prepare(timer);
@@ -197,7 +198,6 @@ struct omap_dm_timer *omap_dm_timer_request(void)
 			timer = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (!timer)
 		pr_debug("%s: timer request failed!\n", __func__);
@@ -220,6 +220,7 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 			break;
 		}
 	}
+	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (timer) {
 		ret = omap_dm_timer_prepare(timer);
@@ -228,7 +229,6 @@ struct omap_dm_timer *omap_dm_timer_request_specific(int id)
 			timer = NULL;
 		}
 	}
-	spin_unlock_irqrestore(&dm_timer_lock, flags);
 
 	if (!timer)
 		pr_debug("%s: timer%d request failed!\n", __func__, id);
@@ -258,7 +258,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_enable);
 
 void omap_dm_timer_disable(struct omap_dm_timer *timer)
 {
-	pm_runtime_put(&timer->pdev->dev);
+	pm_runtime_put_sync(&timer->pdev->dev);
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_disable);
 
diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index 68b180edcfff..bb5d08a70dbc 100644
--- a/arch/arm/plat-omap/include/plat/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -372,7 +372,8 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_class_is_omap1()	(cpu_is_omap7xx() || cpu_is_omap15xx() || \
 				cpu_is_omap16xx())
 #define cpu_class_is_omap2()	(cpu_is_omap24xx() || cpu_is_omap34xx() || \
-				cpu_is_omap44xx() || soc_is_omap54xx())
+				cpu_is_omap44xx() || soc_is_omap54xx() || \
+				soc_is_am33xx())
 
 /* Various silicon revisions for omap2 */
 #define OMAP242X_CLASS		0x24200024
diff --git a/arch/arm/plat-omap/include/plat/multi.h b/arch/arm/plat-omap/include/plat/multi.h
index 045e320f1067..324d31b14852 100644
--- a/arch/arm/plat-omap/include/plat/multi.h
+++ b/arch/arm/plat-omap/include/plat/multi.h
@@ -108,4 +108,13 @@
 # endif
 #endif
 
+#ifdef CONFIG_SOC_AM33XX
+# ifdef OMAP_NAME
+#  undef  MULTI_OMAP2
+#  define MULTI_OMAP2
+# else
+#  define OMAP_NAME am33xx
+# endif
+#endif
+
 #endif	/* __PLAT_OMAP_MULTI_H */
diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index b8d19a136781..7f7b112acccb 100644
--- a/arch/arm/plat-omap/include/plat/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -110,7 +110,7 @@ static inline void flush(void)
 	_DEBUG_LL_ENTRY(mach, AM33XX_UART##p##_BASE, OMAP_PORT_SHIFT,	\
 		AM33XXUART##p)
 
-static inline void __arch_decomp_setup(unsigned long arch_id)
+static inline void arch_decomp_setup(void)
 {
 	int port = 0;
 
@@ -198,8 +198,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id)
 	} while (0);
 }
 
-#define arch_decomp_setup()	__arch_decomp_setup(arch_id)
-
 /*
  * nothing to do
  */
diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c
index d245a87dc014..b8b747a9d360 100644
--- a/arch/arm/plat-orion/common.c
+++ b/arch/arm/plat-orion/common.c
@@ -291,10 +291,12 @@ static struct platform_device orion_ge00 = {
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge00_shared, orion_ge00_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge00_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge00_shared_data,
 		    orion_ge00_resources, irq, &orion_ge00_shared,
 		    eth_data, &orion_ge00);
@@ -343,10 +345,12 @@ static struct platform_device orion_ge01 = {
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err)
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit)
 {
 	fill_resources(&orion_ge01_shared, orion_ge01_shared_resources,
 		       mapbase + 0x2000, SZ_16K - 1, irq_err);
+	orion_ge01_shared_data.tx_csum_limit = tx_csum_limit;
 	ge_complete(&orion_ge01_shared_data,
 		    orion_ge01_resources, irq, &orion_ge01_shared,
 		    eth_data, &orion_ge01);
diff --git a/arch/arm/plat-orion/include/plat/common.h b/arch/arm/plat-orion/include/plat/common.h
index e00fdb213609..ae2377ef63e5 100644
--- a/arch/arm/plat-orion/include/plat/common.h
+++ b/arch/arm/plat-orion/include/plat/common.h
@@ -39,12 +39,14 @@ void __init orion_rtc_init(unsigned long mapbase,
 void __init orion_ge00_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge01_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
 			    unsigned long irq,
-			    unsigned long irq_err);
+			    unsigned long irq_err,
+			    unsigned int tx_csum_limit);
 
 void __init orion_ge10_init(struct mv643xx_eth_platform_data *eth_data,
 			    unsigned long mapbase,
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index 28f898f75380..db98e7021f0d 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -430,7 +430,7 @@ s3c2410_dma_canload(struct s3c2410_dma_chan *chan)
  * when necessary.
 */
 
-int s3c2410_dma_enqueue(unsigned int channel, void *id,
+int s3c2410_dma_enqueue(enum dma_ch channel, void *id,
 			dma_addr_t data, int size)
 {
 	struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel);
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
index 7aca31c1df1f..9c3b90c3538e 100644
--- a/arch/arm/plat-samsung/Kconfig
+++ b/arch/arm/plat-samsung/Kconfig
@@ -403,7 +403,8 @@ config S5P_DEV_USB_EHCI
 
 config S3C24XX_PWM
 	bool "PWM device support"
-	select HAVE_PWM
+	select PWM
+	select PWM_SAMSUNG
 	help
 	  Support for exporting the PWM timer blocks via the pwm device
 	  system
diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c
index 74e31ce35538..fc49f3dabd76 100644
--- a/arch/arm/plat-samsung/devs.c
+++ b/arch/arm/plat-samsung/devs.c
@@ -32,6 +32,8 @@
 #include <linux/platform_data/s3c-hsudc.h>
 #include <linux/platform_data/s3c-hsotg.h>
 
+#include <media/s5p_hdmi.h>
+
 #include <asm/irq.h>
 #include <asm/pmu.h>
 #include <asm/mach/arch.h>
@@ -748,7 +750,8 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	if (!pd) {
 		pd = &default_i2c_data;
 
-		if (soc_is_exynos4210())
+		if (soc_is_exynos4210() ||
+		    soc_is_exynos4212() || soc_is_exynos4412())
 			pd->bus_num = 8;
 		else if (soc_is_s5pv210())
 			pd->bus_num = 3;
@@ -759,6 +762,30 @@ void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd)
 	npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c),
 			       &s5p_device_i2c_hdmiphy);
 }
+
+struct s5p_hdmi_platform_data s5p_hdmi_def_platdata;
+
+void __init s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus)
+{
+	struct s5p_hdmi_platform_data *pd = &s5p_hdmi_def_platdata;
+
+	if (soc_is_exynos4210() ||
+	    soc_is_exynos4212() || soc_is_exynos4412())
+		pd->hdmiphy_bus = 8;
+	else if (soc_is_s5pv210())
+		pd->hdmiphy_bus = 3;
+	else
+		pd->hdmiphy_bus = 0;
+
+	pd->hdmiphy_info = hdmiphy_info;
+	pd->mhl_info = mhl_info;
+	pd->mhl_bus = mhl_bus;
+
+	s3c_set_platdata(pd, sizeof(struct s5p_hdmi_platform_data),
+			 &s5p_device_hdmi);
+}
+
 #endif /* CONFIG_S5P_DEV_I2C_HDMIPHY */
 
 /* I2S */
diff --git a/arch/arm/plat-samsung/include/plat/hdmi.h b/arch/arm/plat-samsung/include/plat/hdmi.h
new file mode 100644
index 000000000000..331d046ac2c5
--- /dev/null
+++ b/arch/arm/plat-samsung/include/plat/hdmi.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __PLAT_SAMSUNG_HDMI_H
+#define __PLAT_SAMSUNG_HDMI_H __FILE__
+
+extern void s5p_hdmi_set_platdata(struct i2c_board_info *hdmiphy_info,
+				  struct i2c_board_info *mhl_info, int mhl_bus);
+
+#endif /* __PLAT_SAMSUNG_HDMI_H */
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 64ab65f0fdbc..15070284343e 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -74,7 +74,7 @@ unsigned char pm_uart_udivslot;
 
 #ifdef CONFIG_SAMSUNG_PM_DEBUG
 
-struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
+static struct pm_uart_save uart_save[CONFIG_SERIAL_SAMSUNG_UARTS];
 
 static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
 {
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index fb849d044bde..c834b32af275 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -719,8 +719,10 @@ static int __init vfp_init(void)
 			if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100)
 				elf_hwcap |= HWCAP_NEON;
 #endif
+#ifdef CONFIG_VFPv3
 			if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000)
 				elf_hwcap |= HWCAP_VFPv4;
+#endif
 		}
 	}
 	return 0;