Merge branch 'omap-fixes-for-linus' into omap-for-linus

30 files changed, 470 insertions, 63 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4c33ca82f9b1..184a6bd54825 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -702,6 +702,7 @@ config ARCH_OMAP
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 9e7582572741..356d702c0808 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -94,7 +94,7 @@ CFLAGS_ABI	+=-funwind-tables
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
 AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 8bf4153d0840..3bf6304158f6 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/orion_spi.h>
@@ -53,6 +54,11 @@ static void __init rd88f6192_init(void)
 	 */
 	kirkwood_init();
 
+	orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
+	if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+	    gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
+		pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
+
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&rd88f6192_ge00_data);
 	kirkwood_sata_init(&rd88f6192_sata_data);
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index 6e838b857712..6acc88bcdc40 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -119,6 +119,11 @@ static unsigned long get_rate_nfc(struct clk *clk)
 	return get_rate_per(8);
 }
 
+static unsigned long get_rate_gpt(struct clk *clk)
+{
+	return get_rate_per(5);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
 	return 48000000; /* FIXME */
@@ -144,7 +149,7 @@ static void clk_cgcr_disable(struct clk *clk)
 	__raw_writel(reg, clk->enable_reg);
 }
 
-#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, s)	\
 	static struct clk name = {			\
 		.id		= i,			\
 		.enable_reg	= CRM_BASE + er,	\
@@ -153,27 +158,30 @@ static void clk_cgcr_disable(struct clk *clk)
 		.set_rate	= sr,			\
 		.enable		= clk_cgcr_enable,	\
 		.disable	= clk_cgcr_disable,	\
+		.secondary	= s,			\
 	}
 
-DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL);
-DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL);
-DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
-DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
-DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
-DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
-DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR0, 23, get_rate_ipg, NULL);
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
+DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
+DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
+DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -208,13 +216,21 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 };
 
-int __init mx25_clocks_init(unsigned long fref)
+int __init mx25_clocks_init(void)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(lookups); i++)
 		clkdev_add(&lookups[i]);
 
+	/* Turn off all clocks except the ones we need to survive, namely:
+	 * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
+	 * SCC
+	 */
+	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
+	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
+	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
 	return 0;
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index 921bc99ea231..6f06089246eb 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -91,7 +91,7 @@ static void __init mx25pdk_init(void)
 
 static void __init mx25pdk_timer_init(void)
 {
-	mx25_clocks_init(26000000);
+	mx25_clocks_init();
 }
 
 static struct sys_timer mx25pdk_timer = {
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 3e7bafa2ddbb..938c549767dc 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -173,6 +173,7 @@ static void expio_unmask_irq(u32 irq)
 }
 
 static struct irq_chip expio_irq_chip = {
+	.name = "EXPIO(CPLD)",
 	.ack = expio_ack_irq,
 	.mask = expio_mask_irq,
 	.unmask = expio_unmask_irq,
@@ -302,6 +303,7 @@ static struct regulator_init_data ldo1_data = {
 		.min_uV = 2800000,
 		.max_uV = 2800000,
 		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		.apply_uV = 1,
 	},
 };
@@ -322,6 +324,7 @@ static struct regulator_init_data ldo2_data = {
 		.min_uV = 3300000,
 		.max_uV = 3300000,
 		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		.apply_uV = 1,
 	},
 	.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
@@ -459,6 +462,7 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
 
 static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
 	.init = mx31_wm8350_init,
+	.irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
 };
 #endif
 
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index 3f1334f62e7a..7027cdc1ba49 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -505,7 +505,7 @@ static void __init gpmc_mem_init(void)
 void __init gpmc_init(void)
 {
 	u32 l;
-	char *ck;
+	char *ck = NULL;
 
 	if (cpu_is_omap24xx()) {
 		ck = "core_l3_ck";
@@ -521,6 +521,9 @@ void __init gpmc_init(void)
 		l = OMAP44XX_GPMC_BASE;
 	}
 
+	if (WARN_ON(!ck))
+		return;
+
 	gpmc_l3_clk = clk_get(NULL, ck);
 	if (IS_ERR(gpmc_l3_clk)) {
 		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 27054025da2b..26aeef560aa3 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -194,7 +194,7 @@ void __init omap_init_irq(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
-		unsigned long base;
+		unsigned long base = 0;
 		struct omap_irq_bank *bank = irq_banks + i;
 
 		if (cpu_is_omap24xx())
@@ -202,6 +202,8 @@ void __init omap_init_irq(void)
 		else if (cpu_is_omap34xx())
 			base = OMAP34XX_IC_BASE;
 
+		BUG_ON(!base);
+
 		/* Static mapping, never released */
 		bank->base_reg = ioremap(base, SZ_4K);
 		if (!bank->base_reg) {
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index 0c3c72d934bf..8afe9dd3f150 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -408,6 +408,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 {
 	struct twl4030_hsmmc_info *c;
 	int nr_hsmmc = ARRAY_SIZE(hsmmc_data);
+	int i;
 
 	if (cpu_is_omap2430()) {
 		control_pbias_offset = OMAP243X_CONTROL_PBIAS_LITE;
@@ -434,7 +435,7 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 		mmc = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
 		if (!mmc) {
 			pr_err("Cannot allocate memory for mmc device!\n");
-			return;
+			goto done;
 		}
 
 		if (c->name)
@@ -532,6 +533,10 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 			continue;
 		c->dev = mmc->dev;
 	}
+
+done:
+	for (i = 0; i < nr_hsmmc; i++)
+		kfree(hsmmc_data[i]);
 }
 
 #endif
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index 3f59bd12cbbf..5fedc50c58e4 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -486,7 +486,7 @@ int __init omap_mux_init_signal(char *muxname, int val)
 static inline void omap_mux_decode(struct seq_file *s, u16 val)
 {
 	char *flags[OMAP_MUX_MAX_NR_FLAGS];
-	char mode[14];
+	char mode[sizeof("OMAP_MUX_MODE") + 1];
 	int i = -1;
 
 	sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
@@ -553,6 +553,7 @@ static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
 		if (!m0_name)
 			continue;
 
+		/* REVISIT: Needs to be updated if mode0 names get longer */
 		for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
 			if (m0_name[i] == '\0') {
 				m0_def[i] = m0_name[i];
@@ -968,6 +969,13 @@ static void __init omap_mux_init_list(struct omap_mux *superset)
 		}
 #endif
 
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)
+		if (!superset->muxnames || !superset->muxnames[0]) {
+			superset++;
+			continue;
+		}
+#endif
+
 		entry = omap_mux_list_add(superset);
 		if (!entry) {
 			printk(KERN_ERR "mux: Could not add entry\n");
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
index 68e0a595f9a1..07aa7b3c95f7 100644
--- a/arch/arm/mach-omap2/mux34xx.c
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -649,6 +649,53 @@ static struct omap_mux __initdata omap3_muxmodes[] = {
 	_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
 		"uart3_tx_irtx", NULL, NULL, NULL,
 		"gpio_166", NULL, NULL, "safe_mode"),
+
+	/* Only on 3630, see omap36xx_cbp_subset for the signals */
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 8c964bec8159..e10a02df6e1d 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -36,7 +36,13 @@
 #define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
-#define DEFAULT_TIMEOUT (5 * HZ)
+/*
+ * NOTE: By default the serial timeout is disabled as it causes lost characters
+ * over the serial ports. This means that the UART clocks will stay on until
+ * disabled via sysfs. This also causes that any deeper omap sleep states are
+ * blocked. 
+ */
+#define DEFAULT_TIMEOUT 0
 
 struct omap_uart_state {
 	int num;
@@ -422,7 +428,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 	uart->timeout = DEFAULT_TIMEOUT;
 	setup_timer(&uart->timer, omap_uart_idle_timer,
 		    (unsigned long) uart);
-	mod_timer(&uart->timer, jiffies + uart->timeout);
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
 	omap_uart_smart_idle_enable(uart, 0);
 
 	if (cpu_is_omap34xx()) {
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index b31ca4cef365..8f159db4d08a 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
@@ -32,6 +33,7 @@
 
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
 #define DNS323_GPIO_LED_LEFT_AMBER	2
+#define DNS323_GPIO_SYSTEM_UP		3
 #define DNS323_GPIO_LED_POWER		5
 #define DNS323_GPIO_OVERTEMP		6
 #define DNS323_GPIO_RTC			7
@@ -239,7 +241,7 @@ static struct gpio_led dns323_leds[] = {
 	{
 		.name = "power:blue",
 		.gpio = DNS323_GPIO_LED_POWER,
-		.active_low = 1,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -334,7 +336,7 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
 	{  0, MPP_UNUSED },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
-	{  3, MPP_UNUSED },
+	{  3, MPP_GPIO },		/* system up flag */
 	{  4, MPP_GPIO },		/* power button LED */
 	{  5, MPP_GPIO },		/* power button LED */
 	{  6, MPP_GPIO },		/* GMT G751-2f overtemp */
@@ -372,13 +374,23 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = {
 	},
 };
 
-/* DNS-323 specific power off method */
-static void dns323_power_off(void)
+/* DNS-323 rev. A specific power off method */
+static void dns323a_power_off(void)
 {
 	pr_info("%s: triggering power-off...\n", __func__);
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 }
 
+/* DNS-323 rev B specific power off method */
+static void dns323b_power_off(void)
+{
+	pr_info("%s: triggering power-off...\n", __func__);
+	/* Pin has to be changed to 1 and back to 0 to do actual power off. */
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+	mdelay(100);
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
+}
+
 static void __init dns323_init(void)
 {
 	/* Setup basic Orion functions. Need to be called early. */
@@ -424,11 +436,20 @@ static void __init dns323_init(void)
 	if (dns323_dev_id() == MV88F5182_DEV_ID)
 		orion5x_sata_init(&dns323_sata_data);
 
-	/* register dns323 specific power-off method */
+	/* The 5182 has flag to indicate the system is up. Without this flag
+	 * set, power LED will flash and cannot be controlled via leds-gpio.
+	 */
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
+
+	/* Register dns323 specific power-off method */
 	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 		pr_err("DNS323: failed to setup power-off GPIO\n");
-	pm_power_off = dns323_power_off;
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		pm_power_off = dns323b_power_off;
+	else
+		pm_power_off = dns323a_power_off;
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 1b4ad9d5e2eb..cb0feca193d4 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -15,6 +15,9 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
@@ -24,6 +27,80 @@
 #include "common.h"
 #include "mpp.h"
 
+/*
+ * LEDs attached to GPIO
+ */
+static struct gpio_led wrt350n_v2_led_pins[] = {
+	{
+		.name		= "wrt350nv2:green:power",
+		.gpio		= 0,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:security",
+		.gpio		= 1,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:orange:power",
+		.gpio		= 5,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:usb",
+		.gpio		= 6,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:wireless",
+		.gpio		= 7,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led_platform_data wrt350n_v2_led_data = {
+	.leds		= wrt350n_v2_led_pins,
+	.num_leds	= ARRAY_SIZE(wrt350n_v2_led_pins),
+};
+
+static struct platform_device wrt350n_v2_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &wrt350n_v2_led_data,
+	},
+};
+
+/*
+ * Buttons attached to GPIO
+ */
+static struct gpio_keys_button wrt350n_v2_buttons[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 3,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_WLAN,
+		.gpio		= 2,
+		.desc		= "WPS Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
+	.buttons	= wrt350n_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(wrt350n_v2_buttons),
+};
+
+static struct platform_device wrt350n_v2_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &wrt350n_v2_button_data,
+	},
+};
+
+/*
+ * General setup
+ */
 static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
 	{  0, MPP_GPIO },		/* Power LED green (0=on) */
 	{  1, MPP_GPIO },		/* Security LED (0=on) */
@@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void)
 	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
 				   WRT350N_V2_NOR_BOOT_SIZE);
 	platform_device_register(&wrt350n_v2_nor_flash);
+	platform_device_register(&wrt350n_v2_leds);
+	platform_device_register(&wrt350n_v2_button_device);
 }
 
 static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index 74446cf8ae69..da3156d8690b 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -457,6 +457,7 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = {
  * USB Device Controller
  */
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
+	.gpio_vbus		= -1,
 	/* no connect GPIO; corgi can't tell connection status */
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index b13dc0269a6d..9c787855cf24 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -169,7 +169,6 @@
 #define GPIO86_nSDCS2		MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
 #define GPIO87_nSDCS3		MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
 #define GPIO88_RDnWR		MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
-#define GPIO89_nACRESET		MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
 
 /* USB */
 #define GPIO9_USB_RCV		MFP_CFG_IN(GPIO9, AF1)
@@ -186,6 +185,9 @@
 #define GPIO30_ASSP_TXD		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
 #define GPIO31_ASSP_SFRM_IN	MFP_CFG_IN(GPIO31, AF1)
 #define GPIO31_ASSP_SFRM_OUT	MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-#endif
+
+/* AC97 */
+#define GPIO89_AC97_nRESET	MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+#endif	/* CONFIG_CPU_PXA26x */
 
 #endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 6112af431fa4..1beb40f692fc 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -164,8 +164,11 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 		saved_icmr[i] = _ICMR(irq);
 		_ICMR(irq) = 0;
 	}
-	for (i = 0; i < pxa_internal_irq_nr; i++)
-		saved_ipr[i] = IPR(i);
+
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+		for (i = 0; i < pxa_internal_irq_nr; i++)
+			saved_ipr[i] = IPR(i);
+	}
 
 	return 0;
 }
@@ -174,12 +177,15 @@ static int pxa_irq_resume(struct sys_device *dev)
 {
 	int i, irq = PXA_IRQ(0);
 
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+		for (i = 0; i < pxa_internal_irq_nr; i++)
+			IPR(i) = saved_ipr[i];
+	}
+
 	for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
 		_ICMR(irq) = saved_icmr[i];
 		_ICLR(irq) = 0;
 	}
-	for (i = 0; i < pxa_internal_irq_nr; i++)
-		IPR(i) = saved_ipr[i];
 
 	ICCR = 1;
 	return 0;
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index a21a4b395f73..d94857eb0690 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -334,8 +334,8 @@ static void realview_pbx_reset(char mode)
 	 * in the system FPGA
 	 */
 	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
-	__raw_writel(0x0000, reset_ctrl);
-	__raw_writel(0x0004, reset_ctrl);
+	__raw_writel(0x00F0, reset_ctrl);
+	__raw_writel(0x00F4, reset_ctrl);
 }
 
 static void __init realview_pbx_init(void)
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 3f9cd3d8f6d5..795dc615f43b 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -41,7 +41,7 @@ ENTRY(cpu_arm7_dcache_clean_area)
 ENTRY(cpu_arm7_data_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r8, [r0]			@ read arm instruction
+	ldr	r8, [r2]			@ read arm instruction
 	tst	r8, #1 << 20			@ L = 0 -> write?
 	orreq	r1, r1, #1 << 11		@ yes.
 	and	r7, r8, #15 << 24
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
index 6f21096086fd..b06954a84436 100644
--- a/arch/arm/plat-mxc/audmux-v2.c
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -23,6 +23,7 @@
 #include <linux/err.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/debugfs.h>
 #include <mach/audmux.h>
 #include <mach/hardware.h>
 
@@ -32,6 +33,140 @@ static void __iomem *audmux_base;
 #define MXC_AUDMUX_V2_PTCR(x)		((x) * 8)
 #define MXC_AUDMUX_V2_PDCR(x)		((x) * 8 + 4)
 
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *audmux_debugfs_root;
+
+static int audmux_open_file(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+/* There is an annoying discontinuity in the SSI numbering with regard
+ * to the Linux number of the devices */
+static const char *audmux_port_string(int port)
+{
+	switch (port) {
+	case MX31_AUDMUX_PORT1_SSI0:
+		return "imx-ssi.0";
+	case MX31_AUDMUX_PORT2_SSI1:
+		return "imx-ssi.1";
+	case MX31_AUDMUX_PORT3_SSI_PINS_3:
+		return "SSI3";
+	case MX31_AUDMUX_PORT4_SSI_PINS_4:
+		return "SSI4";
+	case MX31_AUDMUX_PORT5_SSI_PINS_5:
+		return "SSI5";
+	case MX31_AUDMUX_PORT6_SSI_PINS_6:
+		return "SSI6";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	ssize_t ret;
+	char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	int port = (int)file->private_data;
+	u32 pdcr, ptcr;
+
+	if (!buf)
+		return -ENOMEM;
+
+	if (audmux_clk)
+		clk_enable(audmux_clk);
+
+	ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
+	pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+	if (audmux_clk)
+		clk_disable(audmux_clk);
+
+	ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
+		       pdcr, ptcr);
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxFS output from %s, ",
+				audmux_port_string((ptcr >> 27) & 0x7));
+	else
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxFS input, ");
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxClk output from %s",
+				audmux_port_string((ptcr >> 22) & 0x7));
+	else
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxClk input");
+
+	ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) {
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"Port is symmetric");
+	} else {
+		if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR)
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxFS output from %s, ",
+					audmux_port_string((ptcr >> 17) & 0x7));
+		else
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxFS input, ");
+
+		if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR)
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxClk output from %s",
+					audmux_port_string((ptcr >> 12) & 0x7));
+		else
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxClk input");
+	}
+
+	ret += snprintf(buf + ret, PAGE_SIZE - ret,
+			"\nData received from %s\n",
+			audmux_port_string((pdcr >> 13) & 0x7));
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct file_operations audmux_debugfs_fops = {
+	.open = audmux_open_file,
+	.read = audmux_read_file,
+};
+
+static void audmux_debugfs_init(void)
+{
+	int i;
+	char buf[20];
+
+	audmux_debugfs_root = debugfs_create_dir("audmux", NULL);
+	if (!audmux_debugfs_root) {
+		pr_warning("Failed to create AUDMUX debugfs root\n");
+		return;
+	}
+
+	for (i = 1; i < 8; i++) {
+		snprintf(buf, sizeof(buf), "ssi%d", i);
+		if (!debugfs_create_file(buf, 0444, audmux_debugfs_root,
+					 (void *)i, &audmux_debugfs_fops))
+			pr_warning("Failed to create AUDMUX port %d debugfs file\n",
+				   i);
+	}
+}
+#else
+static inline void audmux_debugfs_init(void)
+{
+}
+#endif
+
 int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
 		unsigned int pdcr)
 {
@@ -68,6 +203,8 @@ static int mxc_audmux_v2_init(void)
 	if (cpu_is_mx31() || cpu_is_mx35())
 		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
 
+	audmux_debugfs_init();
+
 	return 0;
 }
 
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 0184b638c268..2b2da0367578 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -25,7 +25,7 @@
 
 #ifndef __ASSEMBLY__
 
-enum mx31lilly_boards {
+enum mx31lite_boards {
 	MX31LITE_NOBOARD	= 0,
 	MX31LITE_DB		= 1,
 };
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 286cb9b0a25b..4bf1068ffad9 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -32,7 +32,7 @@ extern void mxc91231_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(unsigned long fref);
+extern int mx25_clocks_init(void);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
index 00b0ac1db225..c88d40795f7a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -671,7 +671,7 @@
 #define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_LD9__IPU_DISPB_DAT_9				IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4  0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL)
 #define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_LD10__IPU_DISPB_DAT_10				IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index ead9d592168d..0cb347645db4 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -37,7 +37,12 @@
  * within sensible limits.
  */
 #define MXC_BOARD_IRQ_START	(MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#define MXC_BOARD_IRQS  80
+#else
 #define MXC_BOARD_IRQS	16
+#endif
 
 #define MXC_IPU_IRQ_START	(MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
 
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 0ae27538385d..e3b58afa5dcf 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -402,7 +402,7 @@ static struct dentry *clk_debugfs_root;
 static int clk_debugfs_register_one(struct clk *c)
 {
 	int err;
-	struct dentry *d, *child;
+	struct dentry *d, *child, *child_tmp;
 	struct clk *pa = c->parent;
 	char s[255];
 	char *p = s;
@@ -434,7 +434,7 @@ static int clk_debugfs_register_one(struct clk *c)
 
 err_out:
 	d = c->dent;
-	list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+	list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
 		debugfs_remove(child);
 	debugfs_remove(c->dent);
 	return err;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d17620c50c28..d2422c766cca 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -750,6 +750,7 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 }
 #endif
 
+#ifdef CONFIG_ARCH_OMAP1
 /*
  * This only applies to chips that can't do both rising and falling edge
  * detection at once.  For all other chips, this function is a noop.
@@ -760,11 +761,9 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 	u32 l = 0;
 
 	switch (bank->method) {
-#ifdef CONFIG_ARCH_OMAP1
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		break;
-#endif
 #ifdef CONFIG_ARCH_OMAP15XX
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
@@ -787,6 +786,7 @@ static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
 
 	__raw_writel(l, reg);
 }
+#endif
 
 static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 {
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index d8c75c8f78d7..5195dbb1a397 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -89,16 +89,6 @@
 #define USE_WAKEUP_LAT			0
 #define IGNORE_WAKEUP_LAT		1
 
-/* XXX this should be moved into a separate file */
-#if defined(CONFIG_ARCH_OMAP2420)
-# define OMAP_32KSYNCT_BASE		0x48004000
-#elif defined(CONFIG_ARCH_OMAP2430)
-# define OMAP_32KSYNCT_BASE		0x49020000
-#elif defined(CONFIG_ARCH_OMAP3430)
-# define OMAP_32KSYNCT_BASE		0x48320000
-#else
-# error Unknown OMAP device
-#endif
 
 /* Private functions */
 
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index d41d41d78ad9..54c84a492a0f 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -133,6 +133,12 @@ static void __init orion_pcie_setup_wins(void __iomem *base,
 	}
 
 	/*
+	 * Round up 'size' to the nearest power of two.
+	 */
+	if ((size & (size - 1)) != 0)
+		size = 1 << fls(size);
+
+	/*
 	 * Setup BAR[1] to all DRAM banks.
 	 */
 	writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1));
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index c3a74ce24ef6..5a79fc6ee818 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Wed Dec 16 20:06:34 2009
+# Last update: Thu Jan 28 22:15:54 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -2536,6 +2536,7 @@ davinci_dm6467tevm	MACH_DAVINCI_DM6467TEVM	DAVINCI_DM6467TEVM	2548
 c3ax03			MACH_C3AX03		C3AX03			2549
 mxt_td60		MACH_MXT_TD60		MXT_TD60		2550
 esyx			MACH_ESYX		ESYX			2551
+dove_db2		MACH_DOVE_DB2		DOVE_DB2		2552
 bulldog			MACH_BULLDOG		BULLDOG			2553
 derell_me2000		MACH_DERELL_ME2000	DERELL_ME2000		2554
 bcmring_base		MACH_BCMRING_BASE	BCMRING_BASE		2555
@@ -2555,6 +2556,7 @@ iseo			MACH_ISEO		ISEO			2568
 cezanne			MACH_CEZANNE		CEZANNE			2569
 lucca			MACH_LUCCA		LUCCA			2570
 supersmart		MACH_SUPERSMART		SUPERSMART		2571
+arm11_board		MACH_CS_MISANO		CS_MISANO		2572
 magnolia2		MACH_MAGNOLIA2		MAGNOLIA2		2573
 emxx			MACH_EMXX		EMXX			2574
 outlaw			MACH_OUTLAW		OUTLAW			2575
@@ -2578,3 +2580,59 @@ glacier			MACH_GLACIER		GLACIER			2592
 phrazer_bulldog		MACH_PHRAZER_BULLDOG	PHRAZER_BULLDOG		2593
 omap3_bulldog		MACH_OMAP3_BULLDOG	OMAP3_BULLDOG		2594
 pca101			MACH_PCA101		PCA101			2595
+buzzc			MACH_BUZZC		BUZZC			2596
+sasie2			MACH_SASIE2		SASIE2			2597
+davinci_cio		MACH_DAVINCI_CIO	DAVINCI_CIO		2598
+smartmeter_dl		MACH_SMARTMETER_DL	SMARTMETER_DL		2599
+wzl6410			MACH_WZL6410		WZL6410			2600
+wzl6410m		MACH_WZL6410M		WZL6410M		2601
+wzl6410f		MACH_WZL6410F		WZL6410F		2602
+wzl6410i		MACH_WZL6410I		WZL6410I		2603
+spacecom1		MACH_SPACECOM1		SPACECOM1		2604
+pingu920		MACH_PINGU920		PINGU920		2605
+bravoc			MACH_BRAVOC		BRAVOC			2606
+cybo2440		MACH_CYBO2440		CYBO2440		2607
+vdssw			MACH_VDSSW		VDSSW			2608
+romulus			MACH_ROMULUS		ROMULUS			2609
+omap_magic		MACH_OMAP_MAGIC		OMAP_MAGIC		2610
+eltd100			MACH_ELTD100		ELTD100			2611
+capc7117		MACH_CAPC7117		CAPC7117		2612
+swan			MACH_SWAN		SWAN			2613
+veu			MACH_VEU		VEU			2614
+rm2			MACH_RM2		RM2			2615
+tt2100			MACH_TT2100		TT2100			2616
+venice			MACH_VENICE		VENICE			2617
+pc7323			MACH_PC7323		PC7323			2618
+masp			MACH_MASP		MASP			2619
+fujitsu_tvstbsoc0	MACH_FUJITSU_TVSTBSOC	FUJITSU_TVSTBSOC	2620
+fujitsu_tvstbsoc1	MACH_FUJITSU_TVSTBSOC1	FUJITSU_TVSTBSOC1	2621
+lexikon			MACH_LEXIKON		LEXIKON			2622
+mini2440v2		MACH_MINI2440V2		MINI2440V2		2623
+icontrol		MACH_ICONTROL		ICONTROL		2624
+sheevad			MACH_SHEEVAD		SHEEVAD			2625
+qsd8x50a_st1_1		MACH_QSD8X50A_ST1_1	QSD8X50A_ST1_1		2626
+qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
+bee			MACH_BEE		BEE			2628
+mx23evk			MACH_MX23EVK		MX23EVK			2629
+ap4evb			MACH_AP4EVB		AP4EVB			2630
+stockholm		MACH_STOCKHOLM		STOCKHOLM		2631
+lpc_h3131		MACH_LPC_H3131		LPC_H3131		2632
+stingray		MACH_STINGRAY		STINGRAY		2633
+kraken			MACH_KRAKEN		KRAKEN			2634
+gw2388			MACH_GW2388		GW2388			2635
+jadecpu			MACH_JADECPU		JADECPU			2636
+carlisle		MACH_CARLISLE		CARLISLE		2637
+lux_sf9			MACH_LUX_SFT9		LUX_SFT9		2638
+nemid_tb		MACH_NEMID_TB		NEMID_TB		2639
+terrier			MACH_TERRIER		TERRIER			2640
+turbot			MACH_TURBOT		TURBOT			2641
+sanddab			MACH_SANDDAB		SANDDAB			2642
+mx35_cicada		MACH_MX35_CICADA	MX35_CICADA		2643
+ghi2703d		MACH_GHI2703D		GHI2703D		2644
+lux_sfx9		MACH_LUX_SFX9		LUX_SFX9		2645
+lux_sf9g		MACH_LUX_SF9G		LUX_SF9G		2646
+lux_edk9		MACH_LUX_EDK9		LUX_EDK9		2647
+hw90240			MACH_HW90240		HW90240			2648
+dm365_leopard		MACH_DM365_LEOPARD	DM365_LEOPARD		2649
+mityomapl138		MACH_MITYOMAPL138	MITYOMAPL138		2650
+scat110			MACH_SCAT110		SCAT110			2651
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index f60a5400a25b..a63c4be99b36 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -197,10 +197,13 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
 	}
 
 	/*
-	 * Update the FPSCR with the additional exception flags.
+	 * If any of the status flags are set, update the FPSCR.
 	 * Comparison instructions always return at least one of
 	 * these flags set.
 	 */
+	if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
+		fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
+
 	fpscr |= exceptions;
 
 	fmxr(FPSCR, fpscr);