Merge tag 'for-linus' of git://github.com/realmz/blackfin-linux

Pull blackfin updates from Steven Miao.

* tag 'for-linus' of git://github.com/realmz/blackfin-linux:
  bfin cache: dcplb map: add 16M dcplb map for BF60x
  blackfin: smp: fix smp build after drop asm/system.h
  blackfin: fix bootup core clock and system clock display
  Platform Nand: Set the GPIO for NAND read as input
  blackfin: rename vmImage to uImage after we move to buildroot
  blackfin: twi: Remove bogus #endif
  bf609: rsi: Add bf609 rsi MMR macro and board platform data.
  blackfin: dmc: Improve DDR2 write through in DMC effict controller.

5 files changed, 43 insertions, 2 deletions

diff --git a/arch/blackfin/include/asm/atomic.h b/arch/blackfin/include/asm/atomic.h
index c8db653c72d2..a107a98e9978 100644
--- a/arch/blackfin/include/asm/atomic.h
+++ b/arch/blackfin/include/asm/atomic.h
@@ -11,7 +11,9 @@
 
 #ifdef CONFIG_SMP
 
+#include <asm/barrier.h>
 #include <linux/linkage.h>
+#include <linux/types.h>
 
 asmlinkage int __raw_uncached_fetch_asm(const volatile int *ptr);
 asmlinkage int __raw_atomic_update_asm(volatile int *ptr, int value);
diff --git a/arch/blackfin/include/asm/bfin_sdh.h b/arch/blackfin/include/asm/bfin_sdh.h
index 6a4cfe2d3367..a99957ea9e9b 100644
--- a/arch/blackfin/include/asm/bfin_sdh.h
+++ b/arch/blackfin/include/asm/bfin_sdh.h
@@ -24,18 +24,27 @@ struct bfin_sd_host {
 #define CMD_INT_E          (1 << 8)    /* Command Interrupt */
 #define CMD_PEND_E         (1 << 9)    /* Command Pending */
 #define CMD_E              (1 << 10)   /* Command Enable */
+#ifdef RSI_BLKSZ
+#define CMD_CRC_CHECK_D    (1 << 11)   /* CRC Check is disabled */
+#define CMD_DATA0_BUSY     (1 << 12)   /* Check for Busy State on the DATA0 pin */
+#endif
 
 /* SDH_PWR_CTL bitmasks */
+#ifndef RSI_BLKSZ
 #define PWR_ON             0x3         /* Power On */
 #define SD_CMD_OD          (1 << 6)    /* Open Drain Output */
 #define ROD_CTL            (1 << 7)    /* Rod Control */
+#endif
 
 /* SDH_CLK_CTL bitmasks */
 #define CLKDIV             0xff        /* MC_CLK Divisor */
 #define CLK_E              (1 << 8)    /* MC_CLK Bus Clock Enable */
 #define PWR_SV_E           (1 << 9)    /* Power Save Enable */
 #define CLKDIV_BYPASS      (1 << 10)   /* Bypass Divisor */
-#define WIDE_BUS           (1 << 11)   /* Wide Bus Mode Enable */
+#define BUS_MODE_MASK      0x1800      /* Bus Mode Mask */
+#define STD_BUS_1          0x000       /* Standard Bus 1 bit mode */
+#define WIDE_BUS_4         0x800       /* Wide Bus 4 bit mode */
+#define BYTE_BUS_8         0x1000      /* Byte Bus 8 bit mode */
 
 /* SDH_RESP_CMD bitmasks */
 #define RESP_CMD           0x3f        /* Response Command */
@@ -45,7 +54,13 @@ struct bfin_sd_host {
 #define DTX_DIR            (1 << 1)    /* Data Transfer Direction */
 #define DTX_MODE           (1 << 2)    /* Data Transfer Mode */
 #define DTX_DMA_E          (1 << 3)    /* Data Transfer DMA Enable */
+#ifndef RSI_BLKSZ
 #define DTX_BLK_LGTH       (0xf << 4)  /* Data Transfer Block Length */
+#else
+
+/* Bit masks for SDH_BLK_SIZE */
+#define DTX_BLK_LGTH       0x1fff      /* Data Transfer Block Length */
+#endif
 
 /* SDH_STATUS bitmasks */
 #define CMD_CRC_FAIL       (1 << 0)    /* CMD CRC Fail */
@@ -114,10 +129,14 @@ struct bfin_sd_host {
 /* SDH_E_STATUS bitmasks */
 #define SDIO_INT_DET       (1 << 1)    /* SDIO Int Detected */
 #define SD_CARD_DET        (1 << 4)    /* SD Card Detect */
+#define SD_CARD_BUSYMODE   (1 << 31)   /* Card is in Busy mode */
+#define SD_CARD_SLPMODE    (1 << 30)   /* Card in Sleep Mode */
+#define SD_CARD_READY      (1 << 17)   /* Card Ready */
 
 /* SDH_E_MASK bitmasks */
 #define SDIO_MSK           (1 << 1)    /* Mask SDIO Int Detected */
-#define SCD_MSK            (1 << 6)    /* Mask Card Detect */
+#define SCD_MSK            (1 << 4)    /* Mask Card Detect */
+#define CARD_READY_MSK     (1 << 16)   /* Mask Card Ready */
 
 /* SDH_CFG bitmasks */
 #define CLKS_EN            (1 << 0)    /* Clocks Enable */
@@ -126,7 +145,15 @@ struct bfin_sd_host {
 #define SD_RST             (1 << 4)    /* SDMMC Reset */
 #define PUP_SDDAT          (1 << 5)    /* Pull-up SD_DAT */
 #define PUP_SDDAT3         (1 << 6)    /* Pull-up SD_DAT3 */
+#ifndef RSI_BLKSZ
 #define PD_SDDAT3          (1 << 7)    /* Pull-down SD_DAT3 */
+#else
+#define PWR_ON             0x600       /* Power On */
+#define SD_CMD_OD          (1 << 11)   /* Open Drain Output */
+#define BOOT_EN            (1 << 12)   /* Boot Enable */
+#define BOOT_MODE          (1 << 13)   /* Alternate Boot Mode */
+#define BOOT_ACK_EN        (1 << 14)   /* Boot ACK is expected */
+#endif
 
 /* SDH_RD_WAIT_EN bitmasks */
 #define RWR                (1 << 0)    /* Read Wait Request */
diff --git a/arch/blackfin/include/asm/bitops.h b/arch/blackfin/include/asm/bitops.h
index 8a0fed16058f..0ca40dd44724 100644
--- a/arch/blackfin/include/asm/bitops.h
+++ b/arch/blackfin/include/asm/bitops.h
@@ -41,6 +41,7 @@
 #include <asm-generic/bitops/non-atomic.h>
 #else
 
+#include <asm/barrier.h>
 #include <asm/byteorder.h>	/* swab32 */
 #include <linux/linkage.h>
 
diff --git a/arch/blackfin/include/asm/def_LPBlackfin.h b/arch/blackfin/include/asm/def_LPBlackfin.h
index fe0ca03a1cb2..ca67145c6a45 100644
--- a/arch/blackfin/include/asm/def_LPBlackfin.h
+++ b/arch/blackfin/include/asm/def_LPBlackfin.h
@@ -622,10 +622,12 @@ do { \
 #define PAGE_SIZE_4KB      0x00010000	/* 4 KB page size */
 #define PAGE_SIZE_1MB      0x00020000	/* 1 MB page size */
 #define PAGE_SIZE_4MB      0x00030000	/* 4 MB page size */
+#ifdef CONFIG_BF60x
 #define PAGE_SIZE_16KB     0x00040000	/* 16 KB page size */
 #define PAGE_SIZE_64KB     0x00050000	/* 64 KB page size */
 #define PAGE_SIZE_16MB     0x00060000	/* 16 MB page size */
 #define PAGE_SIZE_64MB     0x00070000	/* 64 MB page size */
+#endif
 #define CPLB_L1SRAM        0x00000020	/* 0=SRAM mapped in L1, 0=SRAM not
 					 * mapped to L1
 					 */
diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h
index 9b33e7247864..c865b33eeb68 100644
--- a/arch/blackfin/include/asm/mem_init.h
+++ b/arch/blackfin/include/asm/mem_init.h
@@ -335,6 +335,7 @@
 struct ddr_config {
 	u32 ddr_clk;
 	u32 dmc_ddrctl;
+	u32 dmc_effctl;
 	u32 dmc_ddrcfg;
 	u32 dmc_ddrtr0;
 	u32 dmc_ddrtr1;
@@ -348,6 +349,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1")))
 	[0] = {
 		.ddr_clk    = 125,
 		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
 		.dmc_ddrcfg = 0x00000422,
 		.dmc_ddrtr0 = 0x20705212,
 		.dmc_ddrtr1 = 0x201003CF,
@@ -358,6 +360,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1")))
 	[1] = {
 		.ddr_clk    = 133,
 		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
 		.dmc_ddrcfg = 0x00000422,
 		.dmc_ddrtr0 = 0x20806313,
 		.dmc_ddrtr1 = 0x2013040D,
@@ -368,6 +371,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1")))
 	[2] = {
 		.ddr_clk    = 150,
 		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
 		.dmc_ddrcfg = 0x00000422,
 		.dmc_ddrtr0 = 0x20A07323,
 		.dmc_ddrtr1 = 0x20160492,
@@ -378,6 +382,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1")))
 	[3] = {
 		.ddr_clk    = 166,
 		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
 		.dmc_ddrcfg = 0x00000422,
 		.dmc_ddrtr0 = 0x20A07323,
 		.dmc_ddrtr1 = 0x2016050E,
@@ -388,6 +393,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1")))
 	[4] = {
 		.ddr_clk    = 200,
 		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
 		.dmc_ddrcfg = 0x00000422,
 		.dmc_ddrtr0 = 0x20a07323,
 		.dmc_ddrtr1 = 0x2016050f,
@@ -398,6 +404,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1")))
 	[5] = {
 		.ddr_clk    = 225,
 		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
 		.dmc_ddrcfg = 0x00000422,
 		.dmc_ddrtr0 = 0x20E0A424,
 		.dmc_ddrtr1 = 0x302006DB,
@@ -408,6 +415,7 @@ static struct ddr_config ddr_config_table[] __attribute__((section(".data_l1")))
 	[6] = {
 		.ddr_clk    = 250,
 		.dmc_ddrctl = 0x00000904,
+		.dmc_effctl = 0x004400C0,
 		.dmc_ddrcfg = 0x00000422,
 		.dmc_ddrtr0 = 0x20E0A424,
 		.dmc_ddrtr1 = 0x3020079E,
@@ -469,6 +477,7 @@ static inline void init_dmc(u32 dmc_clk)
 			bfin_write_DMC0_TR2(ddr_config_table[i].dmc_ddrtr2);
 			bfin_write_DMC0_MR(ddr_config_table[i].dmc_ddrmr);
 			bfin_write_DMC0_EMR1(ddr_config_table[i].dmc_ddrmr1);
+			bfin_write_DMC0_EFFCTL(ddr_config_table[i].dmc_effctl);
 			bfin_write_DMC0_CTL(ddr_config_table[i].dmc_ddrctl);
 			break;
 		}