Merge branch 'master' into next

9 files changed, 424 insertions, 445 deletions

diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c
index 4103a97c1a70..c66a68f30239 100644
--- a/arch/blackfin/mach-bf533/boards/H8606.c
+++ b/arch/blackfin/mach-bf533/boards/H8606.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 
 #include <asm/dma.h>
@@ -141,16 +140,16 @@ static struct platform_device net2272_bfin_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00060000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0x100000,
 		.offset = 0x60000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x6a0000,
 		.offset = 0x00160000,
 	}
diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig
index 840059241fbe..308c98dc5aba 100644
--- a/arch/blackfin/mach-bf533/boards/Kconfig
+++ b/arch/blackfin/mach-bf533/boards/Kconfig
@@ -14,6 +14,12 @@ config BFIN533_STAMP
 	help
 	  BF533-STAMP board support.
 
+config BLACKSTAMP
+	bool "BlackStamp"
+	help
+	  Support for the BlackStamp board.  Hardware info available at
+	  http://blackfin.uclinux.org/gf/project/blackstamp/
+
 config BFIN533_BLUETECHNIX_CM
 	bool "Bluetechnix CM-BF533"
 	depends on (BF533)
diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile
index b7a1a1d79bda..9afbe72b484f 100644
--- a/arch/blackfin/mach-bf533/boards/Makefile
+++ b/arch/blackfin/mach-bf533/boards/Makefile
@@ -7,4 +7,5 @@ obj-$(CONFIG_BFIN533_STAMP)            += stamp.o
 obj-$(CONFIG_BFIN532_IP0X)             += ip0x.o
 obj-$(CONFIG_BFIN533_EZKIT)            += ezkit.o
 obj-$(CONFIG_BFIN533_BLUETECHNIX_CM)   += cm_bf533.o
+obj-$(CONFIG_BLACKSTAMP)               += blackstamp.o
 obj-$(CONFIG_H8606_HVSISTEMAS)         += H8606.o
diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c
new file mode 100644
index 000000000000..d064ded87719
--- /dev/null
+++ b/arch/blackfin/mach-bf533/boards/blackstamp.c
@@ -0,0 +1,401 @@
+/*
+ * File:         arch/blackfin/mach-bf533/blackstamp.c
+ * Based on:     arch/blackfin/mach-bf533/stamp.c
+ * Author:       Benjamin Matthews <bmat@lle.rochester.edu>
+ *               Aidan Williams <aidan@nicta.com.au>
+ *
+ * Created:      2008
+ * Description:  Board Info File for the BlackStamp
+ *
+ * Copyright 2005 National ICT Australia (NICTA)
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Enter bugs at http://blackfin.uclinux.org/
+ *
+ * More info about the BlackStamp at:
+ * 	http://blackfin.uclinux.org/gf/project/blackstamp/
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <asm/dma.h>
+#include <asm/bfin5xx_spi.h>
+#include <asm/portmux.h>
+#include <asm/dpmc.h>
+
+/*
+ * Name the Board for the /proc/cpuinfo
+ */
+const char bfin_board_name[] = "BlackStamp";
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+static struct platform_device rtc_device = {
+	.name = "rtc-bfin",
+	.id   = -1,
+};
+#endif
+
+/*
+ *  Driver needs to know address, irq and flag pin.
+ */
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+static struct resource smc91x_resources[] = {
+	{
+		.name = "smc91x-regs",
+		.start = 0x20300300,
+		.end = 0x20300300 + 16,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.start = IRQ_PF3,
+		.end = IRQ_PF3,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
+	},
+};
+
+static struct platform_device smc91x_device = {
+	.name = "smc91x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(smc91x_resources),
+	.resource = smc91x_resources,
+};
+#endif
+
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+static struct mtd_partition bfin_spi_flash_partitions[] = {
+	{
+		.name = "bootloader(spi)",
+		.size = 0x00040000,
+		.offset = 0,
+		.mask_flags = MTD_CAP_ROM
+	}, {
+		.name = "linux kernel(spi)",
+		.size = 0x180000,
+		.offset = MTDPART_OFS_APPEND,
+	}, {
+		.name = "file system(spi)",
+		.size = MTDPART_SIZ_FULL,
+		.offset = MTDPART_OFS_APPEND,
+	}
+};
+
+static struct flash_platform_data bfin_spi_flash_data = {
+	.name = "m25p80",
+	.parts = bfin_spi_flash_partitions,
+	.nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions),
+	.type = "m25p64",
+};
+
+/* SPI flash chip (m25p64) */
+static struct bfin5xx_spi_chip spi_flash_chip_info = {
+	.enable_dma = 0,         /* use dma transfer with this chip*/
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+static struct bfin5xx_spi_chip spi_mmc_chip_info = {
+	.enable_dma = 1,
+	.bits_per_word = 8,
+};
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+static struct bfin5xx_spi_chip spidev_chip_info = {
+	.enable_dma = 0,
+	.bits_per_word = 8,
+};
+#endif
+
+static struct spi_board_info bfin_spi_board_info[] __initdata = {
+#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
+	{
+		/* the modalias must be the same as spi device driver name */
+		.modalias = "m25p80", /* Name of spi_driver for this device */
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0, /* Framework bus number */
+		.chip_select = 2, /* Framework chip select. */
+		.platform_data = &bfin_spi_flash_data,
+		.controller_data = &spi_flash_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE)
+	{
+		.modalias = "spi_mmc_dummy",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+	{
+		.modalias = "spi_mmc",
+		.max_speed_hz = 20000000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = CONFIG_SPI_MMC_CS_CHAN,
+		.platform_data = NULL,
+		.controller_data = &spi_mmc_chip_info,
+		.mode = SPI_MODE_3,
+	},
+#endif
+
+#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE)
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 3125000,     /* max spi clock (SCK) speed in HZ */
+		.bus_num = 0,
+		.chip_select = 7,
+		.controller_data = &spidev_chip_info,
+	},
+#endif
+};
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+/* SPI (0) */
+static struct resource bfin_spi0_resource[] = {
+	[0] = {
+		.start = SPI0_REGBASE,
+		.end   = SPI0_REGBASE + 0xFF,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CH_SPI,
+		.end   = CH_SPI,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+/* SPI controller data */
+static struct bfin5xx_spi_master bfin_spi0_info = {
+	.num_chipselect = 8,
+	.enable_dma = 1,  /* master has the ability to do dma transfer */
+	.pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0},
+};
+
+static struct platform_device bfin_spi0_device = {
+	.name = "bfin-spi",
+	.id = 0, /* Bus number */
+	.num_resources = ARRAY_SIZE(bfin_spi0_resource),
+	.resource = bfin_spi0_resource,
+	.dev = {
+		.platform_data = &bfin_spi0_info, /* Passed to driver */
+	},
+};
+#endif  /* spi master and devices */
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+static struct resource bfin_uart_resources[] = {
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device bfin_uart_device = {
+	.name = "bfin-uart",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(bfin_uart_resources),
+	.resource = bfin_uart_resources,
+};
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+static struct resource bfin_sir_resources[] = {
+#ifdef CONFIG_BFIN_SIR0
+	{
+		.start = 0xFFC00400,
+		.end = 0xFFC004FF,
+		.flags = IORESOURCE_MEM,
+	},
+#endif
+};
+
+static struct platform_device bfin_sir_device = {
+	.name = "bfin_sir",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(bfin_sir_resources),
+	.resource = bfin_sir_resources,
+};
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+static struct platform_device bfin_sport0_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 0,
+};
+
+static struct platform_device bfin_sport1_uart_device = {
+	.name = "bfin-sport-uart",
+	.id = 1,
+};
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+static struct gpio_keys_button bfin_gpio_keys_table[] = {
+	{BTN_0, GPIO_PF4, 0, "gpio-keys: BTN0"},
+	{BTN_1, GPIO_PF5, 0, "gpio-keys: BTN1"},
+	{BTN_2, GPIO_PF6, 0, "gpio-keys: BTN2"},
+}; /* Mapped to the first three PF Test Points */
+
+static struct gpio_keys_platform_data bfin_gpio_keys_data = {
+	.buttons        = bfin_gpio_keys_table,
+	.nbuttons       = ARRAY_SIZE(bfin_gpio_keys_table),
+};
+
+static struct platform_device bfin_device_gpiokeys = {
+	.name      = "gpio-keys",
+	.dev = {
+		.platform_data = &bfin_gpio_keys_data,
+	},
+};
+#endif
+
+static struct resource bfin_gpios_resources = {
+	.start = 0,
+	.end   = MAX_BLACKFIN_GPIOS - 1,
+	.flags = IORESOURCE_IRQ,
+};
+
+static struct platform_device bfin_gpios_device = {
+	.name = "simple-gpio",
+	.id = -1,
+	.num_resources = 1,
+	.resource = &bfin_gpios_resources,
+};
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+#include <linux/i2c-gpio.h>
+
+static struct i2c_gpio_platform_data i2c_gpio_data = {
+	.sda_pin		= 8,
+	.scl_pin		= 9,
+	.sda_is_open_drain	= 0,
+	.scl_is_open_drain	= 0,
+	.udelay			= 40,
+}; /* This hasn't actually been used these pins
+    * are (currently) free pins on the expansion connector */
+
+static struct platform_device i2c_gpio_device = {
+	.name		= "i2c-gpio",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &i2c_gpio_data,
+	},
+};
+#endif
+
+#ifdef CONFIG_I2C_BOARDINFO
+static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
+};
+#endif
+
+static const unsigned int cclk_vlev_datasheet[] =
+{
+	VRPAIR(VLEV_085, 250000000),
+	VRPAIR(VLEV_090, 376000000),
+	VRPAIR(VLEV_095, 426000000),
+	VRPAIR(VLEV_100, 426000000),
+	VRPAIR(VLEV_105, 476000000),
+	VRPAIR(VLEV_110, 476000000),
+	VRPAIR(VLEV_115, 476000000),
+	VRPAIR(VLEV_120, 600000000),
+	VRPAIR(VLEV_125, 600000000),
+	VRPAIR(VLEV_130, 600000000),
+};
+
+static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = {
+	.tuple_tab = cclk_vlev_datasheet,
+	.tabsize = ARRAY_SIZE(cclk_vlev_datasheet),
+	.vr_settling_time = 25 /* us */,
+};
+
+static struct platform_device bfin_dpmc = {
+	.name = "bfin dpmc",
+	.dev = {
+		.platform_data = &bfin_dmpc_vreg_data,
+	},
+};
+
+static struct platform_device *stamp_devices[] __initdata = {
+
+	&bfin_dpmc,
+
+#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE)
+	&rtc_device,
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	&smc91x_device,
+#endif
+
+
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	&bfin_spi0_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
+	&bfin_uart_device,
+#endif
+
+#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE)
+	&bfin_sir_device,
+#endif
+
+#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE)
+	&bfin_sport0_uart_device,
+	&bfin_sport1_uart_device,
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&bfin_device_gpiokeys,
+#endif
+
+#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
+	&i2c_gpio_device,
+#endif
+
+	&bfin_gpios_device,
+};
+
+static int __init blackstamp_init(void)
+{
+	int ret;
+
+	printk(KERN_INFO "%s(): registering device resources\n", __func__);
+
+#ifdef CONFIG_I2C_BOARDINFO
+	i2c_register_board_info(0, bfin_i2c_board_info,
+				ARRAY_SIZE(bfin_i2c_board_info));
+#endif
+
+	ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
+	if (ret < 0)
+		return ret;
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+	/* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */
+	bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0);
+	bfin_write_FIO_FLAG_S(PF0);
+	SSYNC();
+#endif
+
+	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	return 0;
+}
+
+arch_initcall(blackstamp_init);
diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c
index ed2b0b8f5dc9..575843f6d9ef 100644
--- a/arch/blackfin/mach-bf533/boards/cm_bf533.c
+++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c
@@ -36,7 +36,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -53,16 +52,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF533";
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = 0x20000
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = 0x700000,
 		.offset = 0x00100000,
 	}
@@ -307,43 +306,6 @@ static struct platform_device isp1362_hcd_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	38
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 2,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x2030C000,
-		.end = 0x2030C01F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2030D018,
-		.end = 0x2030D01B,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 static const unsigned int cclk_vlev_datasheet[] =
 {
 	VRPAIR(VLEV_085, 250000000),
@@ -403,10 +365,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = {
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	&bfin_spi0_device,
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
 };
 
 static int __init cm_bf533_init(void)
@@ -416,10 +374,6 @@ static int __init cm_bf533_init(void)
 #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
 #endif
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c
index 079389cbd859..cc2e7eeb1d5a 100644
--- a/arch/blackfin/mach-bf533/boards/ezkit.c
+++ b/arch/blackfin/mach-bf533/boards/ezkit.c
@@ -37,7 +37,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <asm/dma.h>
 #include <asm/bfin5xx_spi.h>
@@ -90,16 +89,16 @@ static struct platform_device smc91x_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00020000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -255,43 +254,6 @@ static struct platform_device bfin_sir_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -404,10 +366,6 @@ static struct platform_device *ezkit_devices[] __initdata = {
 	&bfin_sir_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -424,10 +382,6 @@ static int __init ezkit_init(void)
 	printk(KERN_INFO "%s(): registering device resources\n", __func__);
 	platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c
index 13ae49515f73..050ffca53530 100644
--- a/arch/blackfin/mach-bf533/boards/stamp.c
+++ b/arch/blackfin/mach-bf533/boards/stamp.c
@@ -38,7 +38,6 @@
 #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
 #include <linux/usb/isp1362.h>
 #endif
-#include <linux/ata_platform.h>
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <asm/dma.h>
@@ -114,15 +113,15 @@ static struct platform_device net2272_bfin_device = {
 #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE)
 static struct mtd_partition stamp_partitions[] = {
 	{
-		.name   = "Bootloader",
+		.name   = "bootloader(nor)",
 		.size   = 0x40000,
 		.offset = 0,
 	}, {
-		.name   = "Kernel",
+		.name   = "linux kernel(nor)",
 		.size   = 0xE0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name   = "RootFS",
+		.name   = "file system(nor)",
 		.size   = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -164,16 +163,16 @@ static struct platform_device stamp_flash_device = {
 #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE)
 static struct mtd_partition bfin_spi_flash_partitions[] = {
 	{
-		.name = "bootloader",
+		.name = "bootloader(spi)",
 		.size = 0x00040000,
 		.offset = 0,
 		.mask_flags = MTD_CAP_ROM
 	}, {
-		.name = "kernel",
+		.name = "linux kernel(spi)",
 		.size = 0xe0000,
 		.offset = MTDPART_OFS_APPEND,
 	}, {
-		.name = "file system",
+		.name = "file system(spi)",
 		.size = MTDPART_SIZ_FULL,
 		.offset = MTDPART_OFS_APPEND,
 	}
@@ -404,43 +403,6 @@ static struct platform_device bfin_sport1_uart_device = {
 };
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-#define PATA_INT	55
-
-static struct pata_platform_info bfin_pata_platform_data = {
-	.ioport_shift = 1,
-	.irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED,
-};
-
-static struct resource bfin_pata_resources[] = {
-	{
-		.start = 0x20314020,
-		.end = 0x2031403F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = 0x2031401C,
-		.end = 0x2031401F,
-		.flags = IORESOURCE_MEM,
-	},
-	{
-		.start = PATA_INT,
-		.end = PATA_INT,
-		.flags = IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device bfin_pata_device = {
-	.name = "pata_platform",
-	.id = -1,
-	.num_resources = ARRAY_SIZE(bfin_pata_resources),
-	.resource = bfin_pata_resources,
-	.dev = {
-		.platform_data = &bfin_pata_platform_data,
-	}
-};
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
@@ -583,10 +545,6 @@ static struct platform_device *stamp_devices[] __initdata = {
 	&bfin_sport1_uart_device,
 #endif
 
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	&bfin_pata_device,
-#endif
-
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
 	&bfin_device_gpiokeys,
 #endif
@@ -625,10 +583,6 @@ static int __init stamp_init(void)
 #endif
 
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
-
-#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE)
-	irq_desc[PATA_INT].status |= IRQ_NOAUTOEN;
-#endif
 	return 0;
 }
 
diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S
index c671e8549b17..d59db86195b6 100644
--- a/arch/blackfin/mach-bf533/head.S
+++ b/arch/blackfin/mach-bf533/head.S
@@ -30,294 +30,11 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/blackfin.h>
-#include <asm/trace.h>
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
 #include <asm/mach-common/clocks.h>
 #include <asm/mach/mem_init.h>
 #endif
 
-.extern ___bss_stop
-.extern ___bss_start
-.extern _bf53x_relocate_l1_mem
-
-#define INITIAL_STACK	0xFFB01000
-
-__INIT
-
-ENTRY(__start)
-	/* R0: argument of command line string, passed from uboot, save it */
-	R7 = R0;
-	/* Enable Cycle Counter and Nesting Of Interrupts */
-#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES
-	R0 = SYSCFG_SNEN;
-#else
-	R0 = SYSCFG_SNEN | SYSCFG_CCEN;
-#endif
-	SYSCFG = R0;
-	R0 = 0;
-
-	/* Clear Out All the data and pointer Registers */
-	R1 = R0;
-	R2 = R0;
-	R3 = R0;
-	R4 = R0;
-	R5 = R0;
-	R6 = R0;
-
-	P0 = R0;
-	P1 = R0;
-	P2 = R0;
-	P3 = R0;
-	P4 = R0;
-	P5 = R0;
-
-	LC0 = r0;
-	LC1 = r0;
-	L0 = r0;
-	L1 = r0;
-	L2 = r0;
-	L3 = r0;
-
-	/* Clear Out All the DAG Registers */
-	B0 = r0;
-	B1 = r0;
-	B2 = r0;
-	B3 = r0;
-
-	I0 = r0;
-	I1 = r0;
-	I2 = r0;
-	I3 = r0;
-
-	M0 = r0;
-	M1 = r0;
-	M2 = r0;
-	M3 = r0;
-
-	trace_buffer_init(p0,r0);
-	P0 = R1;
-	R0 = R1;
-
-	p0.h = hi(FIO_MASKA_C);
-	p0.l = lo(FIO_MASKA_C);
-	r0 = 0xFFFF(Z);
-	w[p0] = r0.L;	/* Disable all interrupts */
-	ssync;
-
-	p0.h = hi(FIO_MASKB_C);
-	p0.l = lo(FIO_MASKB_C);
-	r0 = 0xFFFF(Z);
-	w[p0] = r0.L;	/* Disable all interrupts */
-	ssync;
-
-	/* Turn off the icache */
-	p0.l = LO(IMEM_CONTROL);
-	p0.h = HI(IMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENICPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Turn off the dcache */
-	p0.l = LO(DMEM_CONTROL);
-	p0.h = HI(DMEM_CONTROL);
-	R1 = [p0];
-	R0 = ~ENDCPLB;
-	R0 = R0 & R1;
-
-	/* Anomaly 05000125 */
-#if ANOMALY_05000125
-	CLI R2;
-	SSYNC;
-#endif
-	[p0] = R0;
-	SSYNC;
-#if ANOMALY_05000125
-	STI R2;
-#endif
-
-	/* Initialise UART - when booting from u-boot, the UART is not disabled
-	 * so if we dont initalize here, our serial console gets hosed */
-	p0.h = hi(BFIN_UART_LCR);
-	p0.l = lo(BFIN_UART_LCR);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable DLL writes */
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLL);
-	p0.l = lo(BFIN_UART_DLL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_DLH);
-	p0.l = lo(BFIN_UART_DLH);
-	r0 = 0x00(Z);
-	w[p0] = r0.L;
-	ssync;
-
-	p0.h = hi(BFIN_UART_GCTL);
-	p0.l = lo(BFIN_UART_GCTL);
-	r0 = 0x0(Z);
-	w[p0] = r0.L;	/* To enable UART clock */
-	ssync;
-
-	/* Initialize stack pointer */
-	sp.l = lo(INITIAL_STACK);
-	sp.h = hi(INITIAL_STACK);
-	fp = sp;
-	usp = sp;
-
-#ifdef CONFIG_EARLY_PRINTK
-	SP += -12;
-	call _init_early_exception_vectors;
-	SP += 12;
-#endif
-
-	/* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */
-	call _bf53x_relocate_l1_mem;
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-	call _start_dma_code;
-#endif
-
-	/* Code for initializing Async memory banks */
-
-	p2.h = hi(EBIU_AMBCTL1);
-	p2.l = lo(EBIU_AMBCTL1);
-	r0.h = hi(AMBCTL1VAL);
-	r0.l = lo(AMBCTL1VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMBCTL0);
-	p2.l = lo(EBIU_AMBCTL0);
-	r0.h = hi(AMBCTL0VAL);
-	r0.l = lo(AMBCTL0VAL);
-	[p2] = r0;
-	ssync;
-
-	p2.h = hi(EBIU_AMGCTL);
-	p2.l = lo(EBIU_AMGCTL);
-	r0 = AMGCTLVAL;
-	w[p2] = r0;
-	ssync;
-
-	/* This section keeps the processor in supervisor mode
-	 * during kernel boot.  Switches to user mode at end of boot.
-	 * See page 3-9 of Hardware Reference manual for documentation.
-	 */
-
-	/* EVT15 = _real_start */
-
-	p0.l = lo(EVT15);
-	p0.h = hi(EVT15);
-	p1.l = _real_start;
-	p1.h = _real_start;
-	[p0] = p1;
-	csync;
-
-	p0.l = lo(IMASK);
-	p0.h = hi(IMASK);
-	p1.l = IMASK_IVG15;
-	p1.h = 0x0;
-	[p0] = p1;
-	csync;
-
-	raise 15;
-	p0.l = .LWAIT_HERE;
-	p0.h = .LWAIT_HERE;
-	reti = p0;
-#if ANOMALY_05000281
-	nop; nop; nop;
-#endif
-	rti;
-
-.LWAIT_HERE:
-	jump .LWAIT_HERE;
-ENDPROC(__start)
-
-ENTRY(_real_start)
-	[ -- sp ] = reti;
-	p0.l = lo(WDOG_CTL);
-	p0.h = hi(WDOG_CTL);
-	r0 = 0xAD6(z);
-	w[p0] = r0;	/* watchdog off for now */
-	ssync;
-
-	/* Code update for BSS size == 0
-	 * Zero out the bss region.
-	 */
-
-	p1.l = ___bss_start;
-	p1.h = ___bss_start;
-	p2.l = ___bss_stop;
-	p2.h = ___bss_stop;
-	r0 = 0;
-	p2 -= p1;
-	lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2;
-.L_clear_bss:
-	B[p1++] = r0;
-
-	/* In case there is a NULL pointer reference
-	 * Zero out region before stext
-	 */
-
-	p1.l = 0x0;
-	p1.h = 0x0;
-	r0.l = __stext;
-	r0.h = __stext;
-	r0 = r0 >> 1;
-	p2 = r0;
-	r0 = 0;
-	lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2;
-.L_clear_zero:
-	W[p1++] = r0;
-
-	/* pass the uboot arguments to the global value command line */
-	R0 = R7;
-	call _cmdline_init;
-
-	p1.l = __rambase;
-	p1.h = __rambase;
-	r0.l = __sdata;
-	r0.h = __sdata;
-	[p1] = r0;
-
-	p1.l = __ramstart;
-	p1.h = __ramstart;
-	p3.l = ___bss_stop;
-	p3.h = ___bss_stop;
-
-	r1 = p3;
-	[p1] = r1;
-
-	/*
-	 * load the current thread pointer and stack
-	 */
-	r1.l = _init_thread_union;
-	r1.h = _init_thread_union;
-
-	r2.l = 0x2000;
-	r2.h = 0x0000;
-	r1 = r1 + r2;
-	sp = r1;
-	usp = sp;
-	fp = sp;
-	jump.l _start_kernel;
-ENDPROC(_real_start)
-
-__FINIT
-
 .section .l1.text
 #ifdef CONFIG_BFIN_KERNEL_CLOCK
 ENTRY(_start_dma_code)
@@ -412,13 +129,6 @@ ENTRY(_start_dma_code)
 	[P2] = R1;
 	SSYNC;
 
-	p0.h = hi(SIC_IWR);
-	p0.l = lo(SIC_IWR);
-	r0.l = lo(IWR_ENABLE_ALL);
-	r0.h = hi(IWR_ENABLE_ALL);
-	[p0] = r0;
-	SSYNC;
-
 	RTS;
 ENDPROC(_start_dma_code)
 #endif /* CONFIG_BFIN_KERNEL_CLOCK */
diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c
index 7d79e0f9503d..f51994b7a2b9 100644
--- a/arch/blackfin/mach-bf533/ints-priority.c
+++ b/arch/blackfin/mach-bf533/ints-priority.c
@@ -31,7 +31,7 @@
 #include <linux/irq.h>
 #include <asm/blackfin.h>
 
-void program_IAR(void)
+void __init program_IAR(void)
 {
 	/* Program the IAR0 Register with the configured priority */
 	bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) |